Linux-i3c Archive on lore.kernel.org
 help / color / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Vitor Soares <Vitor.Soares@synopsys.com>
Cc: Joao.Pinto@synopsys.com, rafael@kernel.org,
	linux-iio@vger.kernel.org, gregkh@linuxfoundation.org,
	linux-kernel@vger.kernel.org, broonie@kernel.org,
	linux-i3c@lists.infradead.org, bbrezillon@knernel.org
Subject: Re: [PATCH v3 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
Date: Wed, 10 Jul 2019 21:44:05 +0200
Message-ID: <20190710194405.GA10520@lore-desk-wlan.lan> (raw)
In-Reply-To: <73955529ae0c31f428221abb88031ab3b4165659.1562767521.git.vitor.soares@synopsys.com>

[-- Attachment #1.1: Type: text/plain, Size: 3424 bytes --]

> For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in
> spi and i2c mode.
> 
> The LSM6DSO and LSM6DSR are also i3c capable so lets give i3c support to
> them.

Hi Vitor,

just few comments inline.

Regards,
Lorenzo

> 
> Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
> ---
> Changes in v3:
>   Remove unnecessary st_lsm6dsx_i3c_data table used to hold device name
>   Use st_lsm6dsx_probe new form
> 
> Changes in v2:
>   Add support for LSM6DSR
>   Set pm_ops to st_lsm6dsx_pm_ops
> 
>  drivers/iio/imu/st_lsm6dsx/Kconfig          |  8 +++-
>  drivers/iio/imu/st_lsm6dsx/Makefile         |  1 +
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 61 +++++++++++++++++++++++++++++
>  3 files changed, 69 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> 

[...]

> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> new file mode 100644
> index 0000000..f683754
> --- /dev/null
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> @@ -0,0 +1,61 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates.
> + *
> + * Author: Vitor Soares <vitor.soares@synopsys.com>
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/i3c/device.h>
> +#include <linux/i3c/master.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +
> +#include "st_lsm6dsx.h"
> +
> +static const struct i3c_device_id st_lsm6dsx_i3c_ids[];
> +

why do we need this? I guess you can just move st_lsm6dsx_i3c_ids definition here

> +static const struct regmap_config st_lsm6dsx_i3c_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +};
> +
> +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev)
> +{
> +	const struct i3c_device_id *id = i3c_device_match_id(i3cdev,
> +							    st_lsm6dsx_i3c_ids);

i3c_device_match_id can theoretically fail so is it better to check
return value here? (maybe I am too paranoid :))

> +	struct regmap *regmap;
> +	int hw_id = (int)id->data;

I guess we do not need this since we use it just in st_lsm6dsx_probe(),
we can just do:

return st_lsm6dsx_probe(&i3cdev->dev, 0, (int)id->data, regmap);
> +
> +	regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config);
> +	if (IS_ERR(regmap)) {
> +		dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n",
> +			(int)PTR_ERR(regmap));
> +		return PTR_ERR(regmap);
> +	}
> +
> +	return st_lsm6dsx_probe(&i3cdev->dev, 0, hw_id, regmap);
> +}
> +
> +static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = {
> +	I3C_DEVICE(0x0104, 0x006C, (void *)ST_LSM6DSO_ID),
> +	I3C_DEVICE(0x0104, 0x006B, (void *)ST_LSM6DSR_ID),
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids);
> +
> +static struct i3c_driver st_lsm6dsx_driver = {
> +	.driver = {
> +		.name = "st_lsm6dsx_i3c",
> +		.pm = &st_lsm6dsx_pm_ops,
> +	},
> +	.probe = st_lsm6dsx_i3c_probe,
> +	.id_table = st_lsm6dsx_i3c_ids,
> +};
> +module_i3c_driver(st_lsm6dsx_driver);
> +
> +MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>");
> +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver");
> +MODULE_LICENSE("GPL v2");
> -- 
> 2.7.4
> 

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 155 bytes --]

_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

  reply index

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-10 14:56 [PATCH v3 0/3] Add ST lsm6dso i3c support Vitor Soares
2019-07-10 14:56 ` [PATCH v3 1/3] regmap: add i3c bus support Vitor Soares
2019-07-10 15:02   ` Mark Brown
2019-07-10 14:56 ` [PATCH v3 2/3] i3c: move i3c_device_match_id to device.c and export it Vitor Soares
2019-07-10 14:56 ` [PATCH v3 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR Vitor Soares
2019-07-10 19:44   ` Lorenzo Bianconi [this message]
2019-07-11 10:12     ` Vitor Soares
2019-07-11 11:00       ` Vitor Soares
2019-07-11 12:44         ` Lorenzo Bianconi

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190710194405.GA10520@lore-desk-wlan.lan \
    --to=lorenzo@kernel.org \
    --cc=Joao.Pinto@synopsys.com \
    --cc=Vitor.Soares@synopsys.com \
    --cc=bbrezillon@knernel.org \
    --cc=broonie@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-i3c@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rafael@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-i3c Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-i3c/0 linux-i3c/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-i3c linux-i3c/ https://lore.kernel.org/linux-i3c \
		linux-i3c@lists.infradead.org linux-i3c@archiver.kernel.org
	public-inbox-index linux-i3c


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-i3c


AGPL code for this site: git clone https://public-inbox.org/ public-inbox