linux-i3c.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 0/5] i3c: remove device if failed on pre_assign_dyn_addr()
@ 2019-09-03 10:35 Vitor Soares
  2019-09-03 10:35 ` [PATCH v2 1/5] i3c: master: detach and free device if pre_assign_dyn_addr() fails Vitor Soares
                   ` (4 more replies)
  0 siblings, 5 replies; 14+ messages in thread
From: Vitor Soares @ 2019-09-03 10:35 UTC (permalink / raw)
  To: linux-kernel, devicetree, linux-i3c
  Cc: mark.rutland, Joao.Pinto, bbrezillon, Vitor Soares, pgaj, robh+dt

This patch series remove the devices that fail during
pre_assign_dyn_addr() and were being sent on DEFSVLS command.
With the change above, during the i3c_master_add_i3c_dev_locked() is
necessary to check if the device has i3c_boardinfo and try to assign the
i3c_dev_boardinfo->init_dyn_addr if there no oldev. This change will
allow to describe in DT device with preferable dynamic address but without
static address.

Change in v2:
  - Move out detach/free the i3c_dev_desc from pre_assign_dyn_addr()
  - Change i3c_master_search_i3c_boardinfo(newdev) to
  i3c_master_init_i3c_dev_boardinfo(newdev)
  - Add fixes, stable tags on patch 2
  - Add a note for no guarantee of 'assigned-address' use

Vitor Soares (5):
  i3c: master: detach and free device if pre_assign_dyn_addr() fails
  i3c: master: make sure ->boardinfo is initialized in
    add_i3c_dev_locked()
  dt-bindings: i3c: make 'assigned-address' valid if static address == 0
  dt-bindings: i3c: add a note for no guarantee of 'assigned-address' use
  i3c: master: dw: reattach device on first available location of
    address table

 Documentation/devicetree/bindings/i3c/i3c.txt | 15 ++++++--
 drivers/i3c/master.c                          | 49 ++++++++++++++++++++++-----
 drivers/i3c/master/dw-i3c-master.c            | 16 +++++++++
 3 files changed, 68 insertions(+), 12 deletions(-)

-- 
2.7.4


_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH v2 1/5] i3c: master: detach and free device if pre_assign_dyn_addr() fails
  2019-09-03 10:35 [PATCH v2 0/5] i3c: remove device if failed on pre_assign_dyn_addr() Vitor Soares
@ 2019-09-03 10:35 ` Vitor Soares
  2019-09-03 10:52   ` Boris Brezillon
  2019-09-03 11:13   ` Przemyslaw Gaj
  2019-09-03 10:35 ` [PATCH v2 2/5] i3c: master: make sure ->boardinfo is initialized in add_i3c_dev_locked() Vitor Soares
                   ` (3 subsequent siblings)
  4 siblings, 2 replies; 14+ messages in thread
From: Vitor Soares @ 2019-09-03 10:35 UTC (permalink / raw)
  To: linux-kernel, devicetree, linux-i3c
  Cc: mark.rutland, Joao.Pinto, bbrezillon, Vitor Soares, pgaj, robh+dt

On pre_assing_dyn_addr() the devices that fail:
  i3c_master_setdasa_locked()
  i3c_master_reattach_i3c_dev()
  i3c_master_retrieve_dev_info()

are kept in memory and master->bus.devs list. This makes the i3c devices
without a dynamic address are sent on DEFSLVS CCC command. Fix this by
detaching and freeing the devices that fail on pre_assign_dyn_addr().

Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
---
Changes in v2:
  - Move out detach/free the i3c_dev_desc from pre_assign_dyn_addr()
  - Convert i3c_master_pre_assign_dyn_addr() to return an int

 drivers/i3c/master.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index 5f4bd52..586e34f 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -1426,19 +1426,19 @@ static void i3c_master_detach_i2c_dev(struct i2c_dev_desc *dev)
 		master->ops->detach_i2c_dev(dev);
 }
 
-static void i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
+static int i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
 {
 	struct i3c_master_controller *master = i3c_dev_get_master(dev);
 	int ret;
 
 	if (!dev->boardinfo || !dev->boardinfo->init_dyn_addr ||
 	    !dev->boardinfo->static_addr)
-		return;
+		return 0;
 
 	ret = i3c_master_setdasa_locked(master, dev->info.static_addr,
 					dev->boardinfo->init_dyn_addr);
 	if (ret)
-		return;
+		return ret;
 
 	dev->info.dyn_addr = dev->boardinfo->init_dyn_addr;
 	ret = i3c_master_reattach_i3c_dev(dev, 0);
@@ -1449,10 +1449,12 @@ static void i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
 	if (ret)
 		goto err_rstdaa;
 
-	return;
+	return 0;
 
 err_rstdaa:
 	i3c_master_rstdaa_locked(master, dev->boardinfo->init_dyn_addr);
+
+	return ret;
 }
 
 static void
@@ -1647,7 +1649,7 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
 	enum i3c_addr_slot_status status;
 	struct i2c_dev_boardinfo *i2cboardinfo;
 	struct i3c_dev_boardinfo *i3cboardinfo;
-	struct i3c_dev_desc *i3cdev;
+	struct i3c_dev_desc *i3cdev, *i3ctmp;
 	struct i2c_dev_desc *i2cdev;
 	int ret;
 
@@ -1746,8 +1748,14 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
 	 * Pre-assign dynamic address and retrieve device information if
 	 * needed.
 	 */
-	i3c_bus_for_each_i3cdev(&master->bus, i3cdev)
-		i3c_master_pre_assign_dyn_addr(i3cdev);
+	list_for_each_entry_safe(i3cdev, i3ctmp, &master->bus.devs.i3c,
+				 common.node) {
+		ret = i3c_master_pre_assign_dyn_addr(i3cdev);
+		if (ret) {
+			i3c_master_detach_i3c_dev(i3cdev);
+			i3c_master_free_i3c_dev(i3cdev);
+		}
+	}
 
 	ret = i3c_master_do_daa(master);
 	if (ret)
-- 
2.7.4


_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply related	[flat|nested] 14+ messages in thread

* [PATCH v2 2/5] i3c: master: make sure ->boardinfo is initialized in add_i3c_dev_locked()
  2019-09-03 10:35 [PATCH v2 0/5] i3c: remove device if failed on pre_assign_dyn_addr() Vitor Soares
  2019-09-03 10:35 ` [PATCH v2 1/5] i3c: master: detach and free device if pre_assign_dyn_addr() fails Vitor Soares
@ 2019-09-03 10:35 ` Vitor Soares
  2019-09-03 10:35 ` [PATCH v2 3/5] dt-bindings: i3c: Make 'assigned-address' valid if static address == 0 Vitor Soares
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 14+ messages in thread
From: Vitor Soares @ 2019-09-03 10:35 UTC (permalink / raw)
  To: linux-kernel, devicetree, linux-i3c
  Cc: mark.rutland, Joao.Pinto, bbrezillon, stable, Vitor Soares, pgaj,
	robh+dt

The newdev->boardinfo assignment was missing in
i3c_master_add_i3c_dev_locked() and hence the ->of_node info isn't
propagated to  i3c_dev_desc.

Fix this by trying to initialize device i3c_dev_boardinfo if available.

Cc: <stable@vger.kernel.org>
Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure")
Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
---
Changes in v2:
  - Change commit message
  - Change i3c_master_search_i3c_boardinfo(newdev) to
  i3c_master_init_i3c_dev_boardinfo(newdev)
  - Add fixes, stable tags

 drivers/i3c/master.c | 27 +++++++++++++++++++++++++--
 1 file changed, 25 insertions(+), 2 deletions(-)

diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index 586e34f..9fb99bc 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -1798,6 +1798,22 @@ i3c_master_search_i3c_dev_duplicate(struct i3c_dev_desc *refdev)
 	return NULL;
 }
 
+static void i3c_master_init_i3c_dev_boardinfo(struct i3c_dev_desc *dev)
+{
+	struct i3c_master_controller *master = i3c_dev_get_master(dev);
+	struct i3c_dev_boardinfo *boardinfo;
+
+	if (dev->boardinfo)
+		return;
+
+	list_for_each_entry(boardinfo, &master->boardinfo.i3c, node) {
+		if (dev->info.pid == boardinfo->pid) {
+			dev->boardinfo = boardinfo;
+			return;
+		}
+	}
+}
+
 /**
  * i3c_master_add_i3c_dev_locked() - add an I3C slave to the bus
  * @master: master used to send frames on the bus
@@ -1818,8 +1834,9 @@ int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
 				  u8 addr)
 {
 	struct i3c_device_info info = { .dyn_addr = addr };
-	struct i3c_dev_desc *newdev, *olddev;
 	u8 old_dyn_addr = addr, expected_dyn_addr;
+	enum i3c_addr_slot_status addrstatus;
+	struct i3c_dev_desc *newdev, *olddev;
 	struct i3c_ibi_setup ibireq = { };
 	bool enable_ibi = false;
 	int ret;
@@ -1878,6 +1895,8 @@ int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
 	if (ret)
 		goto err_detach_dev;
 
+	i3c_master_init_i3c_dev_boardinfo(newdev);
+
 	/*
 	 * Depending on our previous state, the expected dynamic address might
 	 * differ:
@@ -1895,7 +1914,11 @@ int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
 	else
 		expected_dyn_addr = newdev->info.dyn_addr;
 
-	if (newdev->info.dyn_addr != expected_dyn_addr) {
+	addrstatus = i3c_bus_get_addr_slot_status(&master->bus,
+						  expected_dyn_addr);
+
+	if (newdev->info.dyn_addr != expected_dyn_addr &&
+	    addrstatus == I3C_ADDR_SLOT_FREE) {
 		/*
 		 * Try to apply the expected dynamic address. If it fails, keep
 		 * the address assigned by the master.
-- 
2.7.4


_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply related	[flat|nested] 14+ messages in thread

* [PATCH v2 3/5] dt-bindings: i3c: Make 'assigned-address' valid if static address == 0
  2019-09-03 10:35 [PATCH v2 0/5] i3c: remove device if failed on pre_assign_dyn_addr() Vitor Soares
  2019-09-03 10:35 ` [PATCH v2 1/5] i3c: master: detach and free device if pre_assign_dyn_addr() fails Vitor Soares
  2019-09-03 10:35 ` [PATCH v2 2/5] i3c: master: make sure ->boardinfo is initialized in add_i3c_dev_locked() Vitor Soares
@ 2019-09-03 10:35 ` Vitor Soares
  2019-09-03 17:40   ` Rob Herring
  2019-09-03 10:35 ` [PATCH v2 4/5] dt-bindings: i3c: add a note for no guarantee of 'assigned-address' use Vitor Soares
  2019-09-03 10:35 ` [PATCH v2 5/5] i3c: master: dw: reattach device on first available location of address table Vitor Soares
  4 siblings, 1 reply; 14+ messages in thread
From: Vitor Soares @ 2019-09-03 10:35 UTC (permalink / raw)
  To: linux-kernel, devicetree, linux-i3c
  Cc: mark.rutland, Joao.Pinto, bbrezillon, Vitor Soares, pgaj, robh+dt

The I3C devices without a static address can require a specific dynamic
address for priority reasons.

Let's update the binding document to make the 'assigned-address' property
valid if static address == 0 and add an example with this use case.

Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
---
 Documentation/devicetree/bindings/i3c/i3c.txt | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/i3c/i3c.txt b/Documentation/devicetree/bindings/i3c/i3c.txt
index ab729a0..c851e75 100644
--- a/Documentation/devicetree/bindings/i3c/i3c.txt
+++ b/Documentation/devicetree/bindings/i3c/i3c.txt
@@ -98,9 +98,7 @@ Required properties
 
 Optional properties
 -------------------
-- assigned-address: dynamic address to be assigned to this device. This
-		    property is only valid if the I3C device has a static
-		    address (first cell of the reg property != 0).
+- assigned-address: dynamic address to be assigned to this device.
 
 
 Example:
@@ -129,6 +127,15 @@ Example:
 
 		/*
 		 * I3C device without a static I2C address but requiring
+		 * specific dynamic address.
+		 */
+		sensor@0,39200154004 {
+			reg = <0x0 0x6072 0x303904d2>;
+			assigned-address = <0xb>;
+		};
+
+		/*
+		 * I3C device without a static I2C address but requiring
 		 * resources described in the DT.
 		 */
 		sensor@0,39200154004 {
-- 
2.7.4


_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply related	[flat|nested] 14+ messages in thread

* [PATCH v2 4/5] dt-bindings: i3c: add a note for no guarantee of 'assigned-address' use
  2019-09-03 10:35 [PATCH v2 0/5] i3c: remove device if failed on pre_assign_dyn_addr() Vitor Soares
                   ` (2 preceding siblings ...)
  2019-09-03 10:35 ` [PATCH v2 3/5] dt-bindings: i3c: Make 'assigned-address' valid if static address == 0 Vitor Soares
@ 2019-09-03 10:35 ` Vitor Soares
  2019-09-03 17:41   ` Rob Herring
  2019-09-03 10:35 ` [PATCH v2 5/5] i3c: master: dw: reattach device on first available location of address table Vitor Soares
  4 siblings, 1 reply; 14+ messages in thread
From: Vitor Soares @ 2019-09-03 10:35 UTC (permalink / raw)
  To: linux-kernel, devicetree, linux-i3c
  Cc: mark.rutland, Joao.Pinto, bbrezillon, Vitor Soares, pgaj, robh+dt

By default, the framework will try to assign the 'assigned-address' to the
device but if the address is already in use the device dynamic address
will be different.

Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
---
 Documentation/devicetree/bindings/i3c/i3c.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/i3c/i3c.txt b/Documentation/devicetree/bindings/i3c/i3c.txt
index c851e75..e777f09 100644
--- a/Documentation/devicetree/bindings/i3c/i3c.txt
+++ b/Documentation/devicetree/bindings/i3c/i3c.txt
@@ -98,7 +98,9 @@ Required properties
 
 Optional properties
 -------------------
-- assigned-address: dynamic address to be assigned to this device.
+- assigned-address: dynamic address to be assigned to this device. The framework
+		    will try to assign this dynamic address but if something
+		    fails the device dynamic address will be different.
 
 
 Example:
-- 
2.7.4


_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply related	[flat|nested] 14+ messages in thread

* [PATCH v2 5/5] i3c: master: dw: reattach device on first available location of address table
  2019-09-03 10:35 [PATCH v2 0/5] i3c: remove device if failed on pre_assign_dyn_addr() Vitor Soares
                   ` (3 preceding siblings ...)
  2019-09-03 10:35 ` [PATCH v2 4/5] dt-bindings: i3c: add a note for no guarantee of 'assigned-address' use Vitor Soares
@ 2019-09-03 10:35 ` Vitor Soares
  4 siblings, 0 replies; 14+ messages in thread
From: Vitor Soares @ 2019-09-03 10:35 UTC (permalink / raw)
  To: linux-kernel, devicetree, linux-i3c
  Cc: mark.rutland, Joao.Pinto, bbrezillon, Vitor Soares, pgaj, robh+dt

For today the reattach function only update the device address on the
controller.

Update the location to the first available too, will optimize the
enumeration process avoiding additional checks to keep the available
positions on address table consecutive.

Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
Change in v2:
  - Add Boris rb-tag

 drivers/i3c/master/dw-i3c-master.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/i3c/master/dw-i3c-master.c b/drivers/i3c/master/dw-i3c-master.c
index 1d83c97..62261ac 100644
--- a/drivers/i3c/master/dw-i3c-master.c
+++ b/drivers/i3c/master/dw-i3c-master.c
@@ -898,6 +898,22 @@ static int dw_i3c_master_reattach_i3c_dev(struct i3c_dev_desc *dev,
 	struct dw_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev);
 	struct i3c_master_controller *m = i3c_dev_get_master(dev);
 	struct dw_i3c_master *master = to_dw_i3c_master(m);
+	int pos;
+
+	pos = dw_i3c_master_get_free_pos(master);
+
+	if (data->index > pos && pos > 0) {
+		writel(0,
+		       master->regs +
+		       DEV_ADDR_TABLE_LOC(master->datstartaddr, data->index));
+
+		master->addrs[data->index] = 0;
+		master->free_pos |= BIT(data->index);
+
+		data->index = pos;
+		master->addrs[pos] = dev->info.dyn_addr;
+		master->free_pos &= ~BIT(pos);
+	}
 
 	writel(DEV_ADDR_TABLE_DYNAMIC_ADDR(dev->info.dyn_addr),
 	       master->regs +
-- 
2.7.4


_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply related	[flat|nested] 14+ messages in thread

* Re: [PATCH v2 1/5] i3c: master: detach and free device if pre_assign_dyn_addr() fails
  2019-09-03 10:35 ` [PATCH v2 1/5] i3c: master: detach and free device if pre_assign_dyn_addr() fails Vitor Soares
@ 2019-09-03 10:52   ` Boris Brezillon
  2019-09-03 11:10     ` Vitor Soares
  2019-09-03 11:13   ` Przemyslaw Gaj
  1 sibling, 1 reply; 14+ messages in thread
From: Boris Brezillon @ 2019-09-03 10:52 UTC (permalink / raw)
  To: Vitor Soares
  Cc: mark.rutland, devicetree, Joao.Pinto, bbrezillon, linux-kernel,
	pgaj, robh+dt, linux-i3c

On Tue,  3 Sep 2019 12:35:50 +0200
Vitor Soares <Vitor.Soares@synopsys.com> wrote:

> On pre_assing_dyn_addr() the devices that fail:
>   i3c_master_setdasa_locked()
>   i3c_master_reattach_i3c_dev()
>   i3c_master_retrieve_dev_info()
> 
> are kept in memory and master->bus.devs list. This makes the i3c devices
> without a dynamic address are sent on DEFSLVS CCC command. Fix this by
> detaching and freeing the devices that fail on pre_assign_dyn_addr().
> 
> Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> ---
> Changes in v2:
>   - Move out detach/free the i3c_dev_desc from pre_assign_dyn_addr()

So, you decided to ignore my comment about leaving the i3c_dev_desc
allocated and skipping entries that don't have a dynamic address when
forging the DEFSLVS frame instead of doing this
allocate/free/re-allocate dance, and more importantly, you didn't even
bother explaining why.

I'm not willing to accept this patch unless you come up with solid
reasons.

_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 14+ messages in thread

* RE: [PATCH v2 1/5] i3c: master: detach and free device if pre_assign_dyn_addr() fails
  2019-09-03 10:52   ` Boris Brezillon
@ 2019-09-03 11:10     ` Vitor Soares
  0 siblings, 0 replies; 14+ messages in thread
From: Vitor Soares @ 2019-09-03 11:10 UTC (permalink / raw)
  To: Boris Brezillon, Vitor Soares
  Cc: mark.rutland, devicetree, Joao.Pinto, bbrezillon, linux-kernel,
	pgaj, robh+dt, linux-i3c

Hi Boris,

From: Boris Brezillon <boris.brezillon@collabora.com>
Date: Tue, Sep 03, 2019 at 11:52:37

> On Tue,  3 Sep 2019 12:35:50 +0200
> Vitor Soares <Vitor.Soares@synopsys.com> wrote:
> 
> > On pre_assing_dyn_addr() the devices that fail:
> >   i3c_master_setdasa_locked()
> >   i3c_master_reattach_i3c_dev()
> >   i3c_master_retrieve_dev_info()
> > 
> > are kept in memory and master->bus.devs list. This makes the i3c devices
> > without a dynamic address are sent on DEFSLVS CCC command. Fix this by
> > detaching and freeing the devices that fail on pre_assign_dyn_addr().
> > 
> > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> > ---
> > Changes in v2:
> >   - Move out detach/free the i3c_dev_desc from pre_assign_dyn_addr()
> 
> So, you decided to ignore my comment about leaving the i3c_dev_desc
> allocated and skipping entries that don't have a dynamic address when
> forging the DEFSLVS frame instead of doing this
> allocate/free/re-allocate dance, and more importantly, you didn't even
> bother explaining why.
> 
> I'm not willing to accept this patch unless you come up with solid
> reasons.

I think I already give a strong reason for my decision. Let say that my 
controller only has space for 4 devices and one of them is offline during 
pre_assign_dyn_addr() and hence it fails. When device tries to do the HJ 
I won't be able to do the enumeration because there is no space left. 
Anyway, you are right and I need to add this to commit message.

BTW, It is not clear to me why should we keep non addressed devices 
allocated when we have i3c_dev_boardinfo list with ->of_node information 
and what is the problem with allocate/free/re-allocate dance?

Best regards,
Vitor Soares

_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v2 1/5] i3c: master: detach and free device if pre_assign_dyn_addr() fails
  2019-09-03 10:35 ` [PATCH v2 1/5] i3c: master: detach and free device if pre_assign_dyn_addr() fails Vitor Soares
  2019-09-03 10:52   ` Boris Brezillon
@ 2019-09-03 11:13   ` Przemyslaw Gaj
  2019-09-03 11:57     ` Vitor Soares
  1 sibling, 1 reply; 14+ messages in thread
From: Przemyslaw Gaj @ 2019-09-03 11:13 UTC (permalink / raw)
  To: Vitor Soares
  Cc: mark.rutland, devicetree, Joao.Pinto, bbrezillon, linux-kernel,
	robh+dt, linux-i3c

Hi Vitor,

I'm sorry for the delay.

The 09/03/2019 12:35, Vitor Soares wrote:
> EXTERNAL MAIL
> 
> 
> On pre_assing_dyn_addr() the devices that fail:
>   i3c_master_setdasa_locked()
>   i3c_master_reattach_i3c_dev()
>   i3c_master_retrieve_dev_info()
> 
> are kept in memory and master->bus.devs list. This makes the i3c devices
> without a dynamic address are sent on DEFSLVS CCC command. Fix this by
> detaching and freeing the devices that fail on pre_assign_dyn_addr().

What is the problem with sending devices without dynamic address in DEFSLVS?
Shouldn't we still inform rest of the devices about that? About fact that
device with SA without DA exists on the bus?

I think that this is limitation for us. Espacially we have SA and DA fields in
DEFSLVS frame so we are able to distinguish devices with and without Dynamic
Address.

> 
> Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> ---
> Changes in v2:
>   - Move out detach/free the i3c_dev_desc from pre_assign_dyn_addr()
>   - Convert i3c_master_pre_assign_dyn_addr() to return an int
> 
>  drivers/i3c/master.c | 22 +++++++++++++++-------
>  1 file changed, 15 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
> index 5f4bd52..586e34f 100644
> --- a/drivers/i3c/master.c
> +++ b/drivers/i3c/master.c
> @@ -1426,19 +1426,19 @@ static void i3c_master_detach_i2c_dev(struct i2c_dev_desc *dev)
>  		master->ops->detach_i2c_dev(dev);
>  }
>  
> -static void i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
> +static int i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
>  {
>  	struct i3c_master_controller *master = i3c_dev_get_master(dev);
>  	int ret;
>  
>  	if (!dev->boardinfo || !dev->boardinfo->init_dyn_addr ||
>  	    !dev->boardinfo->static_addr)
> -		return;
> +		return 0;
>  
>  	ret = i3c_master_setdasa_locked(master, dev->info.static_addr,
>  					dev->boardinfo->init_dyn_addr);
>  	if (ret)
> -		return;
> +		return ret;
>  
>  	dev->info.dyn_addr = dev->boardinfo->init_dyn_addr;
>  	ret = i3c_master_reattach_i3c_dev(dev, 0);
> @@ -1449,10 +1449,12 @@ static void i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
>  	if (ret)
>  		goto err_rstdaa;
>  
> -	return;
> +	return 0;
>  
>  err_rstdaa:
>  	i3c_master_rstdaa_locked(master, dev->boardinfo->init_dyn_addr);
> +
> +	return ret;
>  }
>  
>  static void
> @@ -1647,7 +1649,7 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
>  	enum i3c_addr_slot_status status;
>  	struct i2c_dev_boardinfo *i2cboardinfo;
>  	struct i3c_dev_boardinfo *i3cboardinfo;
> -	struct i3c_dev_desc *i3cdev;
> +	struct i3c_dev_desc *i3cdev, *i3ctmp;
>  	struct i2c_dev_desc *i2cdev;
>  	int ret;
>  
> @@ -1746,8 +1748,14 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
>  	 * Pre-assign dynamic address and retrieve device information if
>  	 * needed.
>  	 */
> -	i3c_bus_for_each_i3cdev(&master->bus, i3cdev)
> -		i3c_master_pre_assign_dyn_addr(i3cdev);
> +	list_for_each_entry_safe(i3cdev, i3ctmp, &master->bus.devs.i3c,
> +				 common.node) {
> +		ret = i3c_master_pre_assign_dyn_addr(i3cdev);
> +		if (ret) {
> +			i3c_master_detach_i3c_dev(i3cdev);
> +			i3c_master_free_i3c_dev(i3cdev);
> +		}
> +	}
>  
>  	ret = i3c_master_do_daa(master);
>  	if (ret)
> -- 
> 2.7.4
> 

-- 
-- 
Przemyslaw Gaj

_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 14+ messages in thread

* RE: [PATCH v2 1/5] i3c: master: detach and free device if pre_assign_dyn_addr() fails
  2019-09-03 11:13   ` Przemyslaw Gaj
@ 2019-09-03 11:57     ` Vitor Soares
  2019-09-04  4:47       ` Przemyslaw Gaj
  0 siblings, 1 reply; 14+ messages in thread
From: Vitor Soares @ 2019-09-03 11:57 UTC (permalink / raw)
  To: Przemyslaw Gaj, Vitor Soares
  Cc: mark.rutland, devicetree, Joao.Pinto, bbrezillon, linux-kernel,
	robh+dt, linux-i3c

From: Przemyslaw Gaj <pgaj@cadence.com>
Date: Tue, Sep 03, 2019 at 12:13:57

> Hi Vitor,
> 
> I'm sorry for the delay.
> 
> The 09/03/2019 12:35, Vitor Soares wrote:
> > EXTERNAL MAIL
> > 
> > 
> > On pre_assing_dyn_addr() the devices that fail:
> >   i3c_master_setdasa_locked()
> >   i3c_master_reattach_i3c_dev()
> >   i3c_master_retrieve_dev_info()
> > 
> > are kept in memory and master->bus.devs list. This makes the i3c devices
> > without a dynamic address are sent on DEFSLVS CCC command. Fix this by
> > detaching and freeing the devices that fail on pre_assign_dyn_addr().
> 
> What is the problem with sending devices without dynamic address in DEFSLVS?

How do you address them?
For the DA field in DEFSLVS frame, the spec says: "shall contain the 
current value of the Slave's assigned 7-bit Dynamic address". If the 
device doesn't have the dynamic address assigned yet why send it?

> Shouldn't we still inform rest of the devices about that? About fact that
> device with SA without DA exists on the bus?

I would like to understand what is the use case for this? 

On I3C spec table "I3C Devices Roles vs Responsibilities", Secondary 
Master is not responsible to do Dynamic Address Assignment but it is 
optional to do Hot-Join Dynamic Address Assignment.

> 
> I think that this is limitation for us. Espacially we have SA and DA fields in
> DEFSLVS frame so we are able to distinguish devices with and without Dynamic
> Address.

I would say the reason behind is regarding how to distinguish i2c from 
i3c devices.

> 
> > 
> > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> > ---
> > Changes in v2:
> >   - Move out detach/free the i3c_dev_desc from pre_assign_dyn_addr()
> >   - Convert i3c_master_pre_assign_dyn_addr() to return an int
> > 
> >  drivers/i3c/master.c | 22 +++++++++++++++-------
> >  1 file changed, 15 insertions(+), 7 deletions(-)
> > 
> > diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
> > index 5f4bd52..586e34f 100644
> > --- a/drivers/i3c/master.c
> > +++ b/drivers/i3c/master.c
> > @@ -1426,19 +1426,19 @@ static void i3c_master_detach_i2c_dev(struct i2c_dev_desc *dev)
> >  		master->ops->detach_i2c_dev(dev);
> >  }
> >  
> > -static void i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
> > +static int i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
> >  {
> >  	struct i3c_master_controller *master = i3c_dev_get_master(dev);
> >  	int ret;
> >  
> >  	if (!dev->boardinfo || !dev->boardinfo->init_dyn_addr ||
> >  	    !dev->boardinfo->static_addr)
> > -		return;
> > +		return 0;
> >  
> >  	ret = i3c_master_setdasa_locked(master, dev->info.static_addr,
> >  					dev->boardinfo->init_dyn_addr);
> >  	if (ret)
> > -		return;
> > +		return ret;
> >  
> >  	dev->info.dyn_addr = dev->boardinfo->init_dyn_addr;
> >  	ret = i3c_master_reattach_i3c_dev(dev, 0);
> > @@ -1449,10 +1449,12 @@ static void i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
> >  	if (ret)
> >  		goto err_rstdaa;
> >  
> > -	return;
> > +	return 0;
> >  
> >  err_rstdaa:
> >  	i3c_master_rstdaa_locked(master, dev->boardinfo->init_dyn_addr);
> > +
> > +	return ret;
> >  }
> >  
> >  static void
> > @@ -1647,7 +1649,7 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
> >  	enum i3c_addr_slot_status status;
> >  	struct i2c_dev_boardinfo *i2cboardinfo;
> >  	struct i3c_dev_boardinfo *i3cboardinfo;
> > -	struct i3c_dev_desc *i3cdev;
> > +	struct i3c_dev_desc *i3cdev, *i3ctmp;
> >  	struct i2c_dev_desc *i2cdev;
> >  	int ret;
> >  
> > @@ -1746,8 +1748,14 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
> >  	 * Pre-assign dynamic address and retrieve device information if
> >  	 * needed.
> >  	 */
> > -	i3c_bus_for_each_i3cdev(&master->bus, i3cdev)
> > -		i3c_master_pre_assign_dyn_addr(i3cdev);
> > +	list_for_each_entry_safe(i3cdev, i3ctmp, &master->bus.devs.i3c,
> > +				 common.node) {
> > +		ret = i3c_master_pre_assign_dyn_addr(i3cdev);
> > +		if (ret) {
> > +			i3c_master_detach_i3c_dev(i3cdev);
> > +			i3c_master_free_i3c_dev(i3cdev);
> > +		}
> > +	}
> >  
> >  	ret = i3c_master_do_daa(master);
> >  	if (ret)
> > -- 
> > 2.7.4
> > 
> 
> -- 
> -- 
> Przemyslaw Gaj

Best regards,
Vitor Soares
_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v2 3/5] dt-bindings: i3c: Make 'assigned-address' valid if static address == 0
  2019-09-03 10:35 ` [PATCH v2 3/5] dt-bindings: i3c: Make 'assigned-address' valid if static address == 0 Vitor Soares
@ 2019-09-03 17:40   ` Rob Herring
  0 siblings, 0 replies; 14+ messages in thread
From: Rob Herring @ 2019-09-03 17:40 UTC (permalink / raw)
  To: Vitor Soares
  Cc: mark.rutland, devicetree, Joao.Pinto, bbrezillon, linux-kernel,
	Vitor Soares, pgaj, robh+dt, linux-i3c

On Tue,  3 Sep 2019 12:35:52 +0200, Vitor Soares wrote:
> The I3C devices without a static address can require a specific dynamic
> address for priority reasons.
> 
> Let's update the binding document to make the 'assigned-address' property
> valid if static address == 0 and add an example with this use case.
> 
> Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> ---
>  Documentation/devicetree/bindings/i3c/i3c.txt | 13 ++++++++++---
>  1 file changed, 10 insertions(+), 3 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v2 4/5] dt-bindings: i3c: add a note for no guarantee of 'assigned-address' use
  2019-09-03 10:35 ` [PATCH v2 4/5] dt-bindings: i3c: add a note for no guarantee of 'assigned-address' use Vitor Soares
@ 2019-09-03 17:41   ` Rob Herring
  0 siblings, 0 replies; 14+ messages in thread
From: Rob Herring @ 2019-09-03 17:41 UTC (permalink / raw)
  To: Vitor Soares
  Cc: mark.rutland, devicetree, Joao.Pinto, bbrezillon, linux-kernel,
	Vitor Soares, pgaj, robh+dt, linux-i3c

On Tue,  3 Sep 2019 12:35:53 +0200, Vitor Soares wrote:
> By default, the framework will try to assign the 'assigned-address' to the
> device but if the address is already in use the device dynamic address
> will be different.
> 
> Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> ---
>  Documentation/devicetree/bindings/i3c/i3c.txt | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v2 1/5] i3c: master: detach and free device if pre_assign_dyn_addr() fails
  2019-09-03 11:57     ` Vitor Soares
@ 2019-09-04  4:47       ` Przemyslaw Gaj
  2019-09-04  9:06         ` Vitor Soares
  0 siblings, 1 reply; 14+ messages in thread
From: Przemyslaw Gaj @ 2019-09-04  4:47 UTC (permalink / raw)
  To: Vitor Soares
  Cc: mark.rutland, devicetree, Joao.Pinto, Rafal Ciepiela, bbrezillon,
	linux-kernel, robh+dt, linux-i3c

The 09/03/2019 11:57, Vitor Soares wrote:
> EXTERNAL MAIL
> 
> 
> From: Przemyslaw Gaj <pgaj@cadence.com>
> Date: Tue, Sep 03, 2019 at 12:13:57
> 
> > Hi Vitor,
> > 
> > I'm sorry for the delay.
> > 
> > The 09/03/2019 12:35, Vitor Soares wrote:
> > > EXTERNAL MAIL
> > > 
> > > 
> > > On pre_assing_dyn_addr() the devices that fail:
> > >   i3c_master_setdasa_locked()
> > >   i3c_master_reattach_i3c_dev()
> > >   i3c_master_retrieve_dev_info()
> > > 
> > > are kept in memory and master->bus.devs list. This makes the i3c devices
> > > without a dynamic address are sent on DEFSLVS CCC command. Fix this by
> > > detaching and freeing the devices that fail on pre_assign_dyn_addr().
> > 
> > What is the problem with sending devices without dynamic address in DEFSLVS?
> 
> How do you address them?
> For the DA field in DEFSLVS frame, the spec says: "shall contain the 
> current value of the Slave's assigned 7-bit Dynamic address". If the 
> device doesn't have the dynamic address assigned yet why send it?
>

What stops us from operating with this device in I2C mode using his SA?

> > Shouldn't we still inform rest of the devices about that? About fact that
> > device with SA without DA exists on the bus?
> 
> I would like to understand what is the use case for this? 

Look above. I2C mode still should be possible IMO. Just consider the case when
you really need some information from that device, main master can assign
dynamic address later but you can make some transfers. I know our framework
does not support that case but secondary master can be different system which
should know that this device exists and don't have DA yet, so I2C mode is
available.

> 
> On I3C spec table "I3C Devices Roles vs Responsibilities", Secondary 
> Master is not responsible to do Dynamic Address Assignment but it is 
> optional to do Hot-Join Dynamic Address Assignment.
> 

Yes, we discussed that few times during the review of Mastership patch series.

> > 
> > I think that this is limitation for us. Espacially we have SA and DA fields in
> > DEFSLVS frame so we are able to distinguish devices with and without Dynamic
> > Address.
> 
> I would say the reason behind is regarding how to distinguish i2c from 
> i3c devices.
> 
> > 
> > > 
> > > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> > > ---
> > > Changes in v2:
> > >   - Move out detach/free the i3c_dev_desc from pre_assign_dyn_addr()
> > >   - Convert i3c_master_pre_assign_dyn_addr() to return an int
> > > 
> > >  drivers/i3c/master.c | 22 +++++++++++++++-------
> > >  1 file changed, 15 insertions(+), 7 deletions(-)
> > > 
> > > diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
> > > index 5f4bd52..586e34f 100644
> > > --- a/drivers/i3c/master.c
> > > +++ b/drivers/i3c/master.c
> > > @@ -1426,19 +1426,19 @@ static void i3c_master_detach_i2c_dev(struct i2c_dev_desc *dev)
> > >  		master->ops->detach_i2c_dev(dev);
> > >  }
> > >  
> > > -static void i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
> > > +static int i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
> > >  {
> > >  	struct i3c_master_controller *master = i3c_dev_get_master(dev);
> > >  	int ret;
> > >  
> > >  	if (!dev->boardinfo || !dev->boardinfo->init_dyn_addr ||
> > >  	    !dev->boardinfo->static_addr)
> > > -		return;
> > > +		return 0;
> > >  
> > >  	ret = i3c_master_setdasa_locked(master, dev->info.static_addr,
> > >  					dev->boardinfo->init_dyn_addr);
> > >  	if (ret)
> > > -		return;
> > > +		return ret;
> > >  
> > >  	dev->info.dyn_addr = dev->boardinfo->init_dyn_addr;
> > >  	ret = i3c_master_reattach_i3c_dev(dev, 0);
> > > @@ -1449,10 +1449,12 @@ static void i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
> > >  	if (ret)
> > >  		goto err_rstdaa;
> > >  
> > > -	return;
> > > +	return 0;
> > >  
> > >  err_rstdaa:
> > >  	i3c_master_rstdaa_locked(master, dev->boardinfo->init_dyn_addr);
> > > +
> > > +	return ret;
> > >  }
> > >  
> > >  static void
> > > @@ -1647,7 +1649,7 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
> > >  	enum i3c_addr_slot_status status;
> > >  	struct i2c_dev_boardinfo *i2cboardinfo;
> > >  	struct i3c_dev_boardinfo *i3cboardinfo;
> > > -	struct i3c_dev_desc *i3cdev;
> > > +	struct i3c_dev_desc *i3cdev, *i3ctmp;
> > >  	struct i2c_dev_desc *i2cdev;
> > >  	int ret;
> > >  
> > > @@ -1746,8 +1748,14 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
> > >  	 * Pre-assign dynamic address and retrieve device information if
> > >  	 * needed.
> > >  	 */
> > > -	i3c_bus_for_each_i3cdev(&master->bus, i3cdev)
> > > -		i3c_master_pre_assign_dyn_addr(i3cdev);
> > > +	list_for_each_entry_safe(i3cdev, i3ctmp, &master->bus.devs.i3c,
> > > +				 common.node) {
> > > +		ret = i3c_master_pre_assign_dyn_addr(i3cdev);
> > > +		if (ret) {
> > > +			i3c_master_detach_i3c_dev(i3cdev);
> > > +			i3c_master_free_i3c_dev(i3cdev);
> > > +		}
> > > +	}
> > >  
> > >  	ret = i3c_master_do_daa(master);
> > >  	if (ret)
> > > -- 
> > > 2.7.4
> > > 
> > 
> > -- 
> > -- 
> > Przemyslaw Gaj
> 
> Best regards,
> Vitor Soares

-- 
-- 
Przemyslaw Gaj

_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 14+ messages in thread

* RE: [PATCH v2 1/5] i3c: master: detach and free device if pre_assign_dyn_addr() fails
  2019-09-04  4:47       ` Przemyslaw Gaj
@ 2019-09-04  9:06         ` Vitor Soares
  0 siblings, 0 replies; 14+ messages in thread
From: Vitor Soares @ 2019-09-04  9:06 UTC (permalink / raw)
  To: Przemyslaw Gaj, Vitor Soares
  Cc: mark.rutland, devicetree, Joao.Pinto, Rafal Ciepiela, bbrezillon,
	linux-kernel, robh+dt, linux-i3c

From: Przemyslaw Gaj <pgaj@cadence.com>
Date: Wed, Sep 04, 2019 at 05:47:18

> The 09/03/2019 11:57, Vitor Soares wrote:
> > EXTERNAL MAIL
> > 
> > 
> > From: Przemyslaw Gaj <pgaj@cadence.com>
> > Date: Tue, Sep 03, 2019 at 12:13:57
> > 
> > > Hi Vitor,
> > > 
> > > I'm sorry for the delay.
> > > 
> > > The 09/03/2019 12:35, Vitor Soares wrote:
> > > > EXTERNAL MAIL
> > > > 
> > > > 
> > > > On pre_assing_dyn_addr() the devices that fail:
> > > >   i3c_master_setdasa_locked()
> > > >   i3c_master_reattach_i3c_dev()
> > > >   i3c_master_retrieve_dev_info()
> > > > 
> > > > are kept in memory and master->bus.devs list. This makes the i3c devices
> > > > without a dynamic address are sent on DEFSLVS CCC command. Fix this by
> > > > detaching and freeing the devices that fail on pre_assign_dyn_addr().
> > > 
> > > What is the problem with sending devices without dynamic address in DEFSLVS?
> > 
> > How do you address them?
> > For the DA field in DEFSLVS frame, the spec says: "shall contain the 
> > current value of the Slave's assigned 7-bit Dynamic address". If the 
> > device doesn't have the dynamic address assigned yet why send it?
> >
> 
> What stops us from operating with this device in I2C mode using his SA?

So, send it as an I2C device as spec says.

> 
> > > Shouldn't we still inform rest of the devices about that? About fact that
> > > device with SA without DA exists on the bus?
> > 
> > I would like to understand what is the use case for this? 
> 
> Look above. I2C mode still should be possible IMO. Just consider the case when
> you really need some information from that device, main master can assign
> dynamic address later but you can make some transfers.

It is true, but again it is a I2C device and not I3C device. It won't 
reply to I3C commands until has a DA.
How will you know that the DA sent in DEFSLVS is not assigned yet?

> I know our framework
> does not support that case but secondary master can be different system which
> should know that this device exists and don't have DA yet, so I2C mode is
> available.

If the HJ happen in secondary master side, there is a change to describe 
in DT what should be DA. Please check 2nd patch.

> 
> > 
> > On I3C spec table "I3C Devices Roles vs Responsibilities", Secondary 
> > Master is not responsible to do Dynamic Address Assignment but it is 
> > optional to do Hot-Join Dynamic Address Assignment.
> > 
> 
> Yes, we discussed that few times during the review of Mastership patch series.

Hence, based on that table, secondary master won't do DAA just because he 
want, It needs a HJ to trigger DAA.
Sorry, but for me based on what spec says this use case is not feasible. 


Best regards,
Vitor Soares




_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2019-09-10  6:39 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-03 10:35 [PATCH v2 0/5] i3c: remove device if failed on pre_assign_dyn_addr() Vitor Soares
2019-09-03 10:35 ` [PATCH v2 1/5] i3c: master: detach and free device if pre_assign_dyn_addr() fails Vitor Soares
2019-09-03 10:52   ` Boris Brezillon
2019-09-03 11:10     ` Vitor Soares
2019-09-03 11:13   ` Przemyslaw Gaj
2019-09-03 11:57     ` Vitor Soares
2019-09-04  4:47       ` Przemyslaw Gaj
2019-09-04  9:06         ` Vitor Soares
2019-09-03 10:35 ` [PATCH v2 2/5] i3c: master: make sure ->boardinfo is initialized in add_i3c_dev_locked() Vitor Soares
2019-09-03 10:35 ` [PATCH v2 3/5] dt-bindings: i3c: Make 'assigned-address' valid if static address == 0 Vitor Soares
2019-09-03 17:40   ` Rob Herring
2019-09-03 10:35 ` [PATCH v2 4/5] dt-bindings: i3c: add a note for no guarantee of 'assigned-address' use Vitor Soares
2019-09-03 17:41   ` Rob Herring
2019-09-03 10:35 ` [PATCH v2 5/5] i3c: master: dw: reattach device on first available location of address table Vitor Soares

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).