linux-i3c.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Clark Wang <xiaoning.wang@nxp.com>
Cc: conor.culhane@silvaco.com, alexandre.belloni@bootlin.com,
	linux-i3c@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-imx@nxp.com
Subject: Re: [PATCH V4 6/8] i3c: master: svc: add runtime pm support
Date: Mon, 16 Aug 2021 08:59:50 +0200	[thread overview]
Message-ID: <20210816085950.014401a7@xps13> (raw)
In-Reply-To: <20210809063645.2289988-7-xiaoning.wang@nxp.com>

Hi Clark,

Clark Wang <xiaoning.wang@nxp.com> wrote on Mon,  9 Aug 2021 14:36:43
+0800:

> Add runtime pm support to dynamically manage the clock.
> 
> Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
> Reviewed-by: Jun Li <jun.li@nxp.com>
> ---
> V4:
>  - error path emit_stop only used in svc_i3c_master_do_daa() for one time, so
>    remove it. Or it needs another goto command at the end of the function to
>    skip it and to go to rpm_out.
> V3:
>  - restore the error path of probe function
>  - enable runtime pm just before i3c module reset
> V2: New patch in V2.
> ---
>  drivers/i3c/master/svc-i3c-master.c | 154 ++++++++++++++++++++++++----
>  1 file changed, 135 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
> index 2a96b217cc78..5939e0936697 100644
> --- a/drivers/i3c/master/svc-i3c-master.c
> +++ b/drivers/i3c/master/svc-i3c-master.c
> @@ -17,7 +17,9 @@
>  #include <linux/list.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
> +#include <linux/pinctrl/consumer.h>
>  #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
>  
>  /* Master Mode Registers */
>  #define SVC_I3C_MCONFIG      0x000
> @@ -119,6 +121,7 @@
>  #define   SVC_MDYNADDR_ADDR(x) FIELD_PREP(GENMASK(7, 1), (x))
>  
>  #define SVC_I3C_MAX_DEVS 32
> +#define SVC_I3C_PM_TIMEOUT_MS 1000
>  
>  /* This parameter depends on the implementation and may be tuned */
>  #define SVC_I3C_FIFO_SIZE 16
> @@ -480,10 +483,20 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
>  	u32 ppbaud, pplow, odhpp, odbaud, odstop, i2cbaud, reg;
>  	int ret;
>  
> +	ret = pm_runtime_resume_and_get(master->dev);
> +	if (ret < 0) {
> +		dev_err(master->dev,
> +			"<%s> cannot resume i3c bus master, err: %d\n",
> +			__func__, ret);
> +		return ret;
> +	}
> +
>  	/* Timings derivation */
>  	fclk_rate = clk_get_rate(master->fclk);
> -	if (!fclk_rate)
> -		return -EINVAL;
> +	if (!fclk_rate) {
> +		ret = -EINVAL;
> +		goto rpm_out;
> +	}
>  
>  	fclk_period_ns = DIV_ROUND_UP(1000000000, fclk_rate);
>  
> @@ -527,7 +540,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
>  		odstop = 1;
>  		break;
>  	default:
> -		return -EINVAL;
> +		goto rpm_out;
>  	}
>  
>  	reg = SVC_I3C_MCONFIG_MASTER_EN |
> @@ -545,7 +558,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
>  	/* Master core's registration */
>  	ret = i3c_master_get_free_addr(m, 0);
>  	if (ret < 0)
> -		return ret;
> +		goto rpm_out;
>  
>  	info.dyn_addr = ret;
>  
> @@ -554,21 +567,35 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
>  
>  	ret = i3c_master_set_info(&master->base, &info);
>  	if (ret)
> -		return ret;
> +		goto rpm_out;
>  
>  	svc_i3c_master_enable_interrupts(master, SVC_I3C_MINT_SLVSTART);
>  
> -	return 0;
> +rpm_out:
> +	pm_runtime_mark_last_busy(master->dev);
> +	pm_runtime_put_autosuspend(master->dev);
> +
> +	return ret;
>  }
>  
>  static void svc_i3c_master_bus_cleanup(struct i3c_master_controller *m)
>  {
>  	struct svc_i3c_master *master = to_svc_i3c_master(m);
> +	int ret;
> +
> +	ret = pm_runtime_resume_and_get(master->dev);
> +	if (ret < 0) {
> +		dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
> +		return;
> +	}
>  
>  	svc_i3c_master_disable_interrupts(master);
>  
>  	/* Disable master */
>  	writel(0, master->regs + SVC_I3C_MCONFIG);
> +
> +	pm_runtime_mark_last_busy(master->dev);
> +	pm_runtime_put_autosuspend(master->dev);
>  }
>  
>  static int svc_i3c_master_reserve_slot(struct svc_i3c_master *master)
> @@ -867,31 +894,36 @@ static int svc_i3c_master_do_daa(struct i3c_master_controller *m)
>  	unsigned int dev_nb;
>  	int ret, i;
>  
> +	ret = pm_runtime_resume_and_get(master->dev);
> +	if (ret < 0) {
> +		dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
> +		return ret;
> +	}
> +
>  	spin_lock_irqsave(&master->xferqueue.lock, flags);
>  	ret = svc_i3c_master_do_daa_locked(master, addrs, &dev_nb);
>  	spin_unlock_irqrestore(&master->xferqueue.lock, flags);
> -	if (ret)
> -		goto emit_stop;
> +	if (ret) {
> +		svc_i3c_master_emit_stop(master);
> +		svc_i3c_master_clear_merrwarn(master);
> +		goto rpm_out;
> +	}
>  
>  	/* Register all devices who participated to the core */
>  	for (i = 0; i < dev_nb; i++) {
>  		ret = i3c_master_add_i3c_dev_locked(m, addrs[i]);
>  		if (ret)
> -			return ret;
> +			goto rpm_out;
>  	}
>  
>  	/* Configure IBI auto-rules */
>  	ret = svc_i3c_update_ibirules(master);
> -	if (ret) {
> +	if (ret)
>  		dev_err(master->dev, "Cannot handle such a list of devices");
> -		return ret;
> -	}
>  
> -	return 0;
> -
> -emit_stop:
> -	svc_i3c_master_emit_stop(master);
> -	svc_i3c_master_clear_merrwarn(master);
> +rpm_out:
> +	pm_runtime_mark_last_busy(master->dev);
> +	pm_runtime_put_autosuspend(master->dev);
>  
>  	return ret;
>  }
> @@ -1058,6 +1090,12 @@ static void svc_i3c_master_start_xfer_locked(struct svc_i3c_master *master)
>  	if (!xfer)
>  		return;
>  
> +	ret = pm_runtime_resume_and_get(master->dev);
> +	if (ret < 0) {
> +		dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
> +		return;
> +	}
> +
>  	svc_i3c_master_clear_merrwarn(master);
>  	svc_i3c_master_flush_fifo(master);
>  
> @@ -1072,6 +1110,9 @@ static void svc_i3c_master_start_xfer_locked(struct svc_i3c_master *master)
>  			break;
>  	}
>  
> +	pm_runtime_mark_last_busy(master->dev);
> +	pm_runtime_put_autosuspend(master->dev);
> +
>  	xfer->ret = ret;
>  	complete(&xfer->comp);
>  
> @@ -1348,6 +1389,14 @@ static void svc_i3c_master_free_ibi(struct i3c_dev_desc *dev)
>  static int svc_i3c_master_enable_ibi(struct i3c_dev_desc *dev)
>  {
>  	struct i3c_master_controller *m = i3c_dev_get_master(dev);
> +	struct svc_i3c_master *master = to_svc_i3c_master(m);
> +	int ret;
> +
> +	ret = pm_runtime_resume_and_get(master->dev);
> +	if (ret < 0) {
> +		dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
> +		return ret;
> +	}
>  
>  	return i3c_master_enec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
>  }
> @@ -1355,8 +1404,15 @@ static int svc_i3c_master_enable_ibi(struct i3c_dev_desc *dev)
>  static int svc_i3c_master_disable_ibi(struct i3c_dev_desc *dev)
>  {
>  	struct i3c_master_controller *m = i3c_dev_get_master(dev);
> +	struct svc_i3c_master *master = to_svc_i3c_master(m);
> +	int ret;
>  
> -	return i3c_master_disec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
> +	ret = i3c_master_disec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
> +
> +	pm_runtime_mark_last_busy(master->dev);
> +	pm_runtime_put_autosuspend(master->dev);
> +
> +	return ret;
>  }
>  
>  static void svc_i3c_master_recycle_ibi_slot(struct i3c_dev_desc *dev,
> @@ -1455,16 +1511,31 @@ static int svc_i3c_master_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, master);
>  
> +	pm_runtime_set_autosuspend_delay(&pdev->dev, SVC_I3C_PM_TIMEOUT_MS);
> +	pm_runtime_use_autosuspend(&pdev->dev);
> +	pm_runtime_get_noresume(&pdev->dev);
> +	pm_runtime_set_active(&pdev->dev);
> +	pm_runtime_enable(&pdev->dev);
> +
>  	svc_i3c_master_reset(master);
>  
>  	/* Register the master */
>  	ret = i3c_master_register(&master->base, &pdev->dev,
>  				  &svc_i3c_master_ops, false);
>  	if (ret)
> -		goto err_disable_sclk;
> +		goto rpm_disable;
> +
> +	pm_runtime_mark_last_busy(&pdev->dev);
> +	pm_runtime_put_autosuspend(&pdev->dev);
>  
>  	return 0;
>  
> +rpm_disable:
> +	pm_runtime_dont_use_autosuspend(&pdev->dev);
> +	pm_runtime_put_noidle(&pdev->dev);
> +	pm_runtime_set_suspended(&pdev->dev);
> +	pm_runtime_disable(&pdev->dev);
> +
>  err_disable_sclk:
>  	clk_disable_unprepare(master->sclk);
>  
> @@ -1486,13 +1557,57 @@ static int svc_i3c_master_remove(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> +	pm_runtime_dont_use_autosuspend(&pdev->dev);
> +	pm_runtime_disable(&pdev->dev);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused svc_i3c_runtime_suspend(struct device *dev)
> +{
> +	struct svc_i3c_master *master = dev_get_drvdata(dev);
> +
>  	clk_disable_unprepare(master->pclk);
>  	clk_disable_unprepare(master->fclk);
>  	clk_disable_unprepare(master->sclk);
> +	pinctrl_pm_select_sleep_state(dev);
>  
>  	return 0;
>  }
>  
> +static int __maybe_unused svc_i3c_runtime_resume(struct device *dev)
> +{
> +	struct svc_i3c_master *master = dev_get_drvdata(dev);
> +	int ret = 0;
> +
> +	pinctrl_pm_select_default_state(dev);
> +	ret = clk_prepare_enable(master->pclk);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_prepare_enable(master->fclk);
> +	if (ret) {
> +		clk_disable_unprepare(master->pclk);
> +		return ret;
> +	}
> +
> +	ret = clk_prepare_enable(master->sclk);
> +	if (ret) {
> +		clk_disable_unprepare(master->pclk);
> +		clk_disable_unprepare(master->fclk);
> +		return ret;
> +	}
> +
> +	return ret;
> +}

Can you create svc_i3c_master_prepare_clks() with the current content
of the above helper, then, use that from _runtime_resume() and _probe()
to avoid copying these lines?

With this change you can add my 

Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

> +
> +static const struct dev_pm_ops svc_i3c_pm_ops = {
> +	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> +				      pm_runtime_force_resume)
> +	SET_RUNTIME_PM_OPS(svc_i3c_runtime_suspend,
> +			   svc_i3c_runtime_resume, NULL)
> +};
> +
>  static const struct of_device_id svc_i3c_master_of_match_tbl[] = {
>  	{ .compatible = "silvaco,i3c-master" },
>  	{ /* sentinel */ },
> @@ -1504,6 +1619,7 @@ static struct platform_driver svc_i3c_master = {
>  	.driver = {
>  		.name = "silvaco-i3c-master",
>  		.of_match_table = svc_i3c_master_of_match_tbl,
> +		.pm = &svc_i3c_pm_ops,
>  	},
>  };
>  module_platform_driver(svc_i3c_master);


Thanks,
Miquèl

-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

  reply	other threads:[~2021-08-16  7:00 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-09  6:36 [PATCH V4 0/8] i3c: master: svc: some bug fixes and add runtime pm support Clark Wang
2021-08-09  6:36 ` [PATCH V4 1/8] i3c: master: svc: move module reset behind clk enable Clark Wang
2021-08-09  6:36 ` [PATCH V4 2/8] i3c: master: svc: fix atomic issue Clark Wang
2021-08-09  6:36 ` [PATCH V4 3/8] i3c: master: svc: separate err, fifo and disable interrupt of reset function Clark Wang
2021-08-16  6:52   ` Miquel Raynal
2021-08-09  6:36 ` [PATCH V4 4/8] i3c: master: svc: add support for slave to stop returning data Clark Wang
2021-08-16  7:15   ` Miquel Raynal
2021-08-09  6:36 ` [PATCH V4 5/8] i3c: master: svc: set ODSTOP to let I2C device see the STOP signal Clark Wang
2021-08-09  6:36 ` [PATCH V4 6/8] i3c: master: svc: add runtime pm support Clark Wang
2021-08-16  6:59   ` Miquel Raynal [this message]
2021-08-09  6:36 ` [PATCH V4 7/8] i3c: master: svc: add the missing module device table Clark Wang
2021-08-16  7:00   ` Miquel Raynal
2021-08-09  6:36 ` [PATCH V4 8/8] i3c: master: svc: enable the interrupt in the enable ibi function Clark Wang
2021-08-16  7:02   ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210816085950.014401a7@xps13 \
    --to=miquel.raynal@bootlin.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=conor.culhane@silvaco.com \
    --cc=linux-i3c@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=xiaoning.wang@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).