Linux-i3c Archive on lore.kernel.org
 help / color / Atom feed
From: Vitor Soares <Vitor.Soares@synopsys.com>
To: Vitor Soares <Vitor.Soares@synopsys.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-i3c@lists.infradead.org" <linux-i3c@lists.infradead.org>
Cc: "mark.rutland@arm.com" <mark.rutland@arm.com>,
	Joao Pinto <Joao.Pinto@synopsys.com>,
	"pgaj@cadence.com" <pgaj@cadence.com>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"bbrezillon@kernel.org" <bbrezillon@kernel.org>
Subject: RE: [PATCH v3 1/5] i3c: master: detach/free devices fail on pre_assign_dyn_addr()
Date: Tue, 17 Sep 2019 10:02:34 +0000
Message-ID: <SN6PR12MB26553AEDB14A6B6275AA98CCAE8F0@SN6PR12MB2655.namprd12.prod.outlook.com> (raw)
In-Reply-To: <d16914bbe06cf82cdbf9a0480310bd9cc2e4d8a9.1567608245.git.vitor.soares@synopsys.com>

Hi Boris,

From: Vitor Soares <vitor.soares@synopsys.com>
Date: Thu, Sep 05, 2019 at 11:00:34

> As for today, the I3C framework is keeping in memory and master->bus.devs
> list the devices that fail during pre_assign_dyn_addr() and send them on
> DEFSLVS command.
> 
> According to MIPI I3C Bus spec the DEFSLVS command is used to inform any
> Secondary Master about the Dynamic Addresses that were assigned to I3C
> devices and the I2C devices present on the bus.
> 
> This issue could be fixed by changing i3c_master_defslvs_locked() to
> ignore unaddressed i3c devices but the i3c_dev_desc would be allocated and
> attached to HC unnecessarily. This can cause that some HC aren't able to
> do DAA for HJ capable devices due to lack of space in controller.
> 
> Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> ---
> Changes in v3:
>   - Change commit message
> 
> Changes in v2:
>   - Move out detach/free the i3c_dev_desc from pre_assign_dyn_addr()
>   - Convert i3c_master_pre_assign_dyn_addr() to return an int
> 
>  drivers/i3c/master.c | 22 +++++++++++++++-------
>  1 file changed, 15 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
> index 5f4bd52..586e34f 100644
> --- a/drivers/i3c/master.c
> +++ b/drivers/i3c/master.c
> @@ -1426,19 +1426,19 @@ static void i3c_master_detach_i2c_dev(struct i2c_dev_desc *dev)
>  		master->ops->detach_i2c_dev(dev);
>  }
>  
> -static void i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
> +static int i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
>  {
>  	struct i3c_master_controller *master = i3c_dev_get_master(dev);
>  	int ret;
>  
>  	if (!dev->boardinfo || !dev->boardinfo->init_dyn_addr ||
>  	    !dev->boardinfo->static_addr)
> -		return;
> +		return 0;
>  
>  	ret = i3c_master_setdasa_locked(master, dev->info.static_addr,
>  					dev->boardinfo->init_dyn_addr);
>  	if (ret)
> -		return;
> +		return ret;
>  
>  	dev->info.dyn_addr = dev->boardinfo->init_dyn_addr;
>  	ret = i3c_master_reattach_i3c_dev(dev, 0);
> @@ -1449,10 +1449,12 @@ static void i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
>  	if (ret)
>  		goto err_rstdaa;
>  
> -	return;
> +	return 0;
>  
>  err_rstdaa:
>  	i3c_master_rstdaa_locked(master, dev->boardinfo->init_dyn_addr);
> +
> +	return ret;
>  }
>  
>  static void
> @@ -1647,7 +1649,7 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
>  	enum i3c_addr_slot_status status;
>  	struct i2c_dev_boardinfo *i2cboardinfo;
>  	struct i3c_dev_boardinfo *i3cboardinfo;
> -	struct i3c_dev_desc *i3cdev;
> +	struct i3c_dev_desc *i3cdev, *i3ctmp;
>  	struct i2c_dev_desc *i2cdev;
>  	int ret;
>  
> @@ -1746,8 +1748,14 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
>  	 * Pre-assign dynamic address and retrieve device information if
>  	 * needed.
>  	 */
> -	i3c_bus_for_each_i3cdev(&master->bus, i3cdev)
> -		i3c_master_pre_assign_dyn_addr(i3cdev);
> +	list_for_each_entry_safe(i3cdev, i3ctmp, &master->bus.devs.i3c,
> +				 common.node) {
> +		ret = i3c_master_pre_assign_dyn_addr(i3cdev);
> +		if (ret) {
> +			i3c_master_detach_i3c_dev(i3cdev);
> +			i3c_master_free_i3c_dev(i3cdev);
> +		}
> +	}
>  
>  	ret = i3c_master_do_daa(master);
>  	if (ret)
> -- 
> 2.7.4

I think I clearly explain why the current solution is problematic and my 
choices for the proposal solution.
Please let me know if there is anything else that I can improve in this 
patch.

Best regards,
Vitor Soares

_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

  reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-05 10:00 [PATCH v3 0/5] i3c: detach/free device fail pre_assign_dyn_addr() Vitor Soares
2019-09-05 10:00 ` [PATCH v3 1/5] i3c: master: detach/free devices fail on pre_assign_dyn_addr() Vitor Soares
2019-09-17 10:02   ` Vitor Soares [this message]
2019-09-05 10:00 ` [PATCH v3 2/5] i3c: master: make sure ->boardinfo is initialized in add_i3c_dev_locked() Vitor Soares
2019-10-03 14:29   ` Boris Brezillon
2019-10-03 17:37     ` Vitor Soares
2019-10-03 18:35       ` Boris Brezillon
2019-09-05 10:00 ` [PATCH v3 3/5] dt-bindings: i3c: Make 'assigned-address' valid if static address == 0 Vitor Soares
2019-09-05 10:00 ` [PATCH v3 4/5] dt-bindings: i3c: add a note for no guarantee of 'assigned-address' use Vitor Soares
2019-09-05 10:00 ` [PATCH v3 5/5] i3c: master: dw: reattach device on first available location of address table Vitor Soares

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=SN6PR12MB26553AEDB14A6B6275AA98CCAE8F0@SN6PR12MB2655.namprd12.prod.outlook.com \
    --to=vitor.soares@synopsys.com \
    --cc=Joao.Pinto@synopsys.com \
    --cc=bbrezillon@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-i3c@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pgaj@cadence.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-i3c Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-i3c/0 linux-i3c/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-i3c linux-i3c/ https://lore.kernel.org/linux-i3c \
		linux-i3c@lists.infradead.org
	public-inbox-index linux-i3c

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-i3c


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git