[PATCH v2 0/3] Fix i2c and i3c scl rate according bus mode

[PATCH v2 0/3] Fix i2c and i3c scl rate according bus mode

[Vitor Soares]

This patch series fix the i2c and i3c scl rate according the bus mode
and LVR register. It also introduce the mixed limited bus for the
cases where i2c devices doesn't have 50 ns filter but allow higher
clock rate for i3c transfers.
Please refer table 5 and 10 of i3c bus spec v1.0 for more detail.

Please follow each patch commit message for more details and changes
made in this version.

Vitor Soares (3):
  i3c: fix i2c and i3c scl rate by bus mode
  i3c: add mixed limited bus mode
  i3c: dw: add limited bus mode support

 drivers/i3c/master.c               | 66 ++++++++++++++++++++++++++++++--------
 drivers/i3c/master/dw-i3c-master.c |  1 +
 include/linux/i3c/master.h         |  5 +++
 3 files changed, 59 insertions(+), 13 deletions(-)

-- 
2.7.4


_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

[PATCH v2 1/3] i3c: fix i2c and i3c scl rate by bus mode

[Vitor Soares]

Currently the I3C framework limits SCL frequency to FM speed when
dealing with a mixed slow bus, even if all I2C devices are FM+ capable.

The core was also not accounting for I3C speed limitations when
operating in mixed slow mode and was erroneously using FM+ speed as the
max I2C speed when operating in mixed fast mode.

Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure")
Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
---
Changes in v2:
  Enhance commit message
  Add dev_warn() in case user-defined i2c rate doesn't match LVR constraint
  Add dev_warn() in case user-defined i3c rate lower than i2c rate.

 drivers/i3c/master.c | 61 +++++++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 48 insertions(+), 13 deletions(-)

diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index 5f4bd52..8cd5824 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -91,6 +91,12 @@ void i3c_bus_normaluse_unlock(struct i3c_bus *bus)
 	up_read(&bus->lock);
 }
 
+static struct i3c_master_controller *
+i3c_bus_to_i3c_master(struct i3c_bus *i3cbus)
+{
+	return container_of(i3cbus, struct i3c_master_controller, bus);
+}
+
 static struct i3c_master_controller *dev_to_i3cmaster(struct device *dev)
 {
 	return container_of(dev, struct i3c_master_controller, dev);
@@ -565,20 +571,48 @@ static const struct device_type i3c_masterdev_type = {
 	.groups	= i3c_masterdev_groups,
 };
 
-int i3c_bus_set_mode(struct i3c_bus *i3cbus, enum i3c_bus_mode mode)
+int i3c_bus_set_mode(struct i3c_bus *i3cbus, enum i3c_bus_mode mode,
+		     unsigned long max_i2c_scl_rate)
 {
-	i3cbus->mode = mode;
 
-	if (!i3cbus->scl_rate.i3c)
-		i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
+	struct i3c_master_controller *master = i3c_bus_to_i3c_master(i3cbus);
 
-	if (!i3cbus->scl_rate.i2c) {
-		if (i3cbus->mode == I3C_BUS_MODE_MIXED_SLOW)
-			i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_SCL_RATE;
-		else
-			i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_PLUS_SCL_RATE;
+	i3cbus->mode = mode;
+
+	switch (i3cbus->mode) {
+	case I3C_BUS_MODE_PURE:
+		if (!i3cbus->scl_rate.i3c)
+			i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
+		break;
+	case I3C_BUS_MODE_MIXED_FAST:
+		if (!i3cbus->scl_rate.i3c)
+			i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
+		if (!i3cbus->scl_rate.i2c)
+			i3cbus->scl_rate.i2c = max_i2c_scl_rate;
+		break;
+	case I3C_BUS_MODE_MIXED_SLOW:
+		if (!i3cbus->scl_rate.i2c)
+			i3cbus->scl_rate.i2c = max_i2c_scl_rate;
+		if (!i3cbus->scl_rate.i3c ||
+		    i3cbus->scl_rate.i3c > i3cbus->scl_rate.i2c)
+			i3cbus->scl_rate.i3c = i3cbus->scl_rate.i2c;
+		break;
+	default:
+		return -EINVAL;
 	}
 
+	if (i3cbus->scl_rate.i3c < i3cbus->scl_rate.i2c)
+		dev_warn(&master->dev,
+			 "i3c-scl-hz=%ld lower than i2c-scl-hz=%ld\n",
+			 i3cbus->scl_rate.i3c, i3cbus->scl_rate.i2c);
+
+	if (i3cbus->scl_rate.i2c != I3C_BUS_I2C_FM_SCL_RATE &&
+	    i3cbus->scl_rate.i2c != I3C_BUS_I2C_FM_PLUS_SCL_RATE &&
+	    i3cbus->mode != I3C_BUS_MODE_PURE)
+		dev_warn(&master->dev,
+			 "i2c-scl-hz=%ld not defined according MIPI I3C spec\n"
+			 , i3cbus->scl_rate.i2c);
+
 	/*
 	 * I3C/I2C frequency may have been overridden, check that user-provided
 	 * values are not exceeding max possible frequency.
@@ -1966,9 +2000,6 @@ of_i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master,
 	/* LVR is encoded in reg[2]. */
 	boardinfo->lvr = reg[2];
 
-	if (boardinfo->lvr & I3C_LVR_I2C_FM_MODE)
-		master->bus.scl_rate.i2c = I3C_BUS_I2C_FM_SCL_RATE;
-
 	list_add_tail(&boardinfo->node, &master->boardinfo.i2c);
 	of_node_get(node);
 
@@ -2417,6 +2448,7 @@ int i3c_master_register(struct i3c_master_controller *master,
 			const struct i3c_master_controller_ops *ops,
 			bool secondary)
 {
+	unsigned long i2c_scl_rate = I3C_BUS_I2C_FM_PLUS_SCL_RATE;
 	struct i3c_bus *i3cbus = i3c_master_get_bus(master);
 	enum i3c_bus_mode mode = I3C_BUS_MODE_PURE;
 	struct i2c_dev_boardinfo *i2cbi;
@@ -2466,9 +2498,12 @@ int i3c_master_register(struct i3c_master_controller *master,
 			ret = -EINVAL;
 			goto err_put_dev;
 		}
+
+		if (i2cbi->lvr & I3C_LVR_I2C_FM_MODE)
+			i2c_scl_rate = I3C_BUS_I2C_FM_SCL_RATE;
 	}
 
-	ret = i3c_bus_set_mode(i3cbus, mode);
+	ret = i3c_bus_set_mode(i3cbus, mode, i2c_scl_rate);
 	if (ret)
 		goto err_put_dev;
 
-- 
2.7.4


_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

[PATCH v2 2/3] i3c: add mixed limited bus mode

[Vitor Soares]

The i3c bus spec defines a bus configuration where i2c devices don't
have a 50ns filter but support SCL running at SDR max rate (12.5MHz).

This patch introduces the limited bus mode so that users can use
a higher speed in presence of i2c devices index 1.

Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: <linux-kernel@vger.kernel.org>
---
Changes in v2:
  Enhance commit message

 drivers/i3c/master.c       | 5 +++++
 include/linux/i3c/master.h | 5 +++++
 2 files changed, 10 insertions(+)

diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index 8cd5824..f446c4d 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -470,6 +470,7 @@ static int i3c_bus_init(struct i3c_bus *i3cbus)
 static const char * const i3c_bus_mode_strings[] = {
 	[I3C_BUS_MODE_PURE] = "pure",
 	[I3C_BUS_MODE_MIXED_FAST] = "mixed-fast",
+	[I3C_BUS_MODE_MIXED_LIMITED] = "mixed-limited",
 	[I3C_BUS_MODE_MIXED_SLOW] = "mixed-slow",
 };
 
@@ -585,6 +586,7 @@ int i3c_bus_set_mode(struct i3c_bus *i3cbus, enum i3c_bus_mode mode,
 			i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
 		break;
 	case I3C_BUS_MODE_MIXED_FAST:
+	case I3C_BUS_MODE_MIXED_LIMITED:
 		if (!i3cbus->scl_rate.i3c)
 			i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
 		if (!i3cbus->scl_rate.i2c)
@@ -2490,6 +2492,9 @@ int i3c_master_register(struct i3c_master_controller *master,
 				mode = I3C_BUS_MODE_MIXED_FAST;
 			break;
 		case I3C_LVR_I2C_INDEX(1):
+			if (mode < I3C_BUS_MODE_MIXED_LIMITED)
+				mode = I3C_BUS_MODE_MIXED_LIMITED;
+			break;
 		case I3C_LVR_I2C_INDEX(2):
 			if (mode < I3C_BUS_MODE_MIXED_SLOW)
 				mode = I3C_BUS_MODE_MIXED_SLOW;
diff --git a/include/linux/i3c/master.h b/include/linux/i3c/master.h
index f13fd8b..89ea461 100644
--- a/include/linux/i3c/master.h
+++ b/include/linux/i3c/master.h
@@ -250,12 +250,17 @@ struct i3c_device {
  *			     the bus. The only impact in this mode is that the
  *			     high SCL pulse has to stay below 50ns to trick I2C
  *			     devices when transmitting I3C frames
+ * @I3C_BUS_MODE_MIXED_LIMITED: I2C devices without 50ns spike filter are
+ *				present on the bus. However they allows
+ *				compliance up to the maximum SDR SCL clock
+ *				frequency.
  * @I3C_BUS_MODE_MIXED_SLOW: I2C devices without 50ns spike filter are present
  *			     on the bus
  */
 enum i3c_bus_mode {
 	I3C_BUS_MODE_PURE,
 	I3C_BUS_MODE_MIXED_FAST,
+	I3C_BUS_MODE_MIXED_LIMITED,
 	I3C_BUS_MODE_MIXED_SLOW,
 };
 
-- 
2.7.4


_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

[PATCH v2 3/3] i3c: dw: add limited bus mode support

[Vitor Soares]

This patch add limited bus mode support for DesignWare i3c master

Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: <linux-kernel@vger.kernel.org>
---
Changes in v2:
  None

 drivers/i3c/master/dw-i3c-master.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/i3c/master/dw-i3c-master.c b/drivers/i3c/master/dw-i3c-master.c
index 1d83c97..9612d93 100644
--- a/drivers/i3c/master/dw-i3c-master.c
+++ b/drivers/i3c/master/dw-i3c-master.c
@@ -599,6 +599,7 @@ static int dw_i3c_master_bus_init(struct i3c_master_controller *m)
 
 	switch (bus->mode) {
 	case I3C_BUS_MODE_MIXED_FAST:
+	case I3C_BUS_MODE_MIXED_LIMITED:
 		ret = dw_i2c_clk_cfg(master);
 		if (ret)
 			return ret;
-- 
2.7.4


_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

Re: [PATCH v2 1/3] i3c: fix i2c and i3c scl rate by bus mode

[Boris Brezillon]

On Thu,  6 Jun 2019 16:00:01 +0200
Vitor Soares <Vitor.Soares@synopsys.com> wrote:

> Currently the I3C framework limits SCL frequency to FM speed when
> dealing with a mixed slow bus, even if all I2C devices are FM+ capable.
> 
> The core was also not accounting for I3C speed limitations when
> operating in mixed slow mode and was erroneously using FM+ speed as the
> max I2C speed when operating in mixed fast mode.
> 
> Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure")
> Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> Cc: Boris Brezillon <bbrezillon@kernel.org>
> Cc: <stable@vger.kernel.org>
> Cc: <linux-kernel@vger.kernel.org>
> ---
> Changes in v2:
>   Enhance commit message
>   Add dev_warn() in case user-defined i2c rate doesn't match LVR constraint
>   Add dev_warn() in case user-defined i3c rate lower than i2c rate.
> 
>  drivers/i3c/master.c | 61 +++++++++++++++++++++++++++++++++++++++++-----------
>  1 file changed, 48 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
> index 5f4bd52..8cd5824 100644
> --- a/drivers/i3c/master.c
> +++ b/drivers/i3c/master.c
> @@ -91,6 +91,12 @@ void i3c_bus_normaluse_unlock(struct i3c_bus *bus)
>  	up_read(&bus->lock);
>  }
>  
> +static struct i3c_master_controller *
> +i3c_bus_to_i3c_master(struct i3c_bus *i3cbus)
> +{
> +	return container_of(i3cbus, struct i3c_master_controller, bus);
> +}
> +
>  static struct i3c_master_controller *dev_to_i3cmaster(struct device *dev)
>  {
>  	return container_of(dev, struct i3c_master_controller, dev);
> @@ -565,20 +571,48 @@ static const struct device_type i3c_masterdev_type = {
>  	.groups	= i3c_masterdev_groups,
>  };
>  
> -int i3c_bus_set_mode(struct i3c_bus *i3cbus, enum i3c_bus_mode mode)
> +int i3c_bus_set_mode(struct i3c_bus *i3cbus, enum i3c_bus_mode mode,
> +		     unsigned long max_i2c_scl_rate)
>  {
> -	i3cbus->mode = mode;
>  
> -	if (!i3cbus->scl_rate.i3c)
> -		i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
> +	struct i3c_master_controller *master = i3c_bus_to_i3c_master(i3cbus);
>  
> -	if (!i3cbus->scl_rate.i2c) {
> -		if (i3cbus->mode == I3C_BUS_MODE_MIXED_SLOW)
> -			i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_SCL_RATE;
> -		else
> -			i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_PLUS_SCL_RATE;
> +	i3cbus->mode = mode;
> +
> +	switch (i3cbus->mode) {
> +	case I3C_BUS_MODE_PURE:
> +		if (!i3cbus->scl_rate.i3c)
> +			i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
> +		break;
> +	case I3C_BUS_MODE_MIXED_FAST:
> +		if (!i3cbus->scl_rate.i3c)
> +			i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
> +		if (!i3cbus->scl_rate.i2c)
> +			i3cbus->scl_rate.i2c = max_i2c_scl_rate;
> +		break;
> +	case I3C_BUS_MODE_MIXED_SLOW:
> +		if (!i3cbus->scl_rate.i2c)
> +			i3cbus->scl_rate.i2c = max_i2c_scl_rate;
> +		if (!i3cbus->scl_rate.i3c ||
> +		    i3cbus->scl_rate.i3c > i3cbus->scl_rate.i2c)
> +			i3cbus->scl_rate.i3c = i3cbus->scl_rate.i2c;
> +		break;
> +	default:
> +		return -EINVAL;
>  	}
>  
> +	if (i3cbus->scl_rate.i3c < i3cbus->scl_rate.i2c)
> +		dev_warn(&master->dev,
> +			 "i3c-scl-hz=%ld lower than i2c-scl-hz=%ld\n",
> +			 i3cbus->scl_rate.i3c, i3cbus->scl_rate.i2c);
> +
> +	if (i3cbus->scl_rate.i2c != I3C_BUS_I2C_FM_SCL_RATE &&
> +	    i3cbus->scl_rate.i2c != I3C_BUS_I2C_FM_PLUS_SCL_RATE &&
> +	    i3cbus->mode != I3C_BUS_MODE_PURE)

If you are so strict, there's clearly no point exposing an i2c-scl-hz
property. I'm still not convinced having an i2c rate that's slower than
what the I2C/I3C spec defines as the *typical* rate is a bad thing, just
like I'm not convinced having an I3C rate that's slower than the I2C
one is a problem (it's definitely a weird situation, but there's nothing
preventing that in the spec).

> +		dev_warn(&master->dev,
> +			 "i2c-scl-hz=%ld not defined according MIPI I3C spec\n"
> +			 , i3cbus->scl_rate.i2c);

The comma should be on the previous line.

> +
>  	/*
>  	 * I3C/I2C frequency may have been overridden, check that user-provided
>  	 * values are not exceeding max possible frequency.
> @@ -1966,9 +2000,6 @@ of_i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master,
>  	/* LVR is encoded in reg[2]. */
>  	boardinfo->lvr = reg[2];
>  
> -	if (boardinfo->lvr & I3C_LVR_I2C_FM_MODE)
> -		master->bus.scl_rate.i2c = I3C_BUS_I2C_FM_SCL_RATE;
> -
>  	list_add_tail(&boardinfo->node, &master->boardinfo.i2c);
>  	of_node_get(node);
>  
> @@ -2417,6 +2448,7 @@ int i3c_master_register(struct i3c_master_controller *master,
>  			const struct i3c_master_controller_ops *ops,
>  			bool secondary)
>  {
> +	unsigned long i2c_scl_rate = I3C_BUS_I2C_FM_PLUS_SCL_RATE;
>  	struct i3c_bus *i3cbus = i3c_master_get_bus(master);
>  	enum i3c_bus_mode mode = I3C_BUS_MODE_PURE;
>  	struct i2c_dev_boardinfo *i2cbi;
> @@ -2466,9 +2498,12 @@ int i3c_master_register(struct i3c_master_controller *master,
>  			ret = -EINVAL;
>  			goto err_put_dev;
>  		}
> +
> +		if (i2cbi->lvr & I3C_LVR_I2C_FM_MODE)
> +			i2c_scl_rate = I3C_BUS_I2C_FM_SCL_RATE;
>  	}
>  
> -	ret = i3c_bus_set_mode(i3cbus, mode);
> +	ret = i3c_bus_set_mode(i3cbus, mode, i2c_scl_rate);
>  	if (ret)
>  		goto err_put_dev;
>  


_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

RE: [PATCH v2 1/3] i3c: fix i2c and i3c scl rate by bus mode

[Vitor Soares]

From: Boris Brezillon <boris.brezillon@collabora.com>
Date: Thu, Jun 06, 2019 at 15:18:44

> On Thu,  6 Jun 2019 16:00:01 +0200
> Vitor Soares <Vitor.Soares@synopsys.com> wrote:
> 
> > Currently the I3C framework limits SCL frequency to FM speed when
> > dealing with a mixed slow bus, even if all I2C devices are FM+ capable.
> > 
> > The core was also not accounting for I3C speed limitations when
> > operating in mixed slow mode and was erroneously using FM+ speed as the
> > max I2C speed when operating in mixed fast mode.
> > 
> > Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure")
> > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> > Cc: Boris Brezillon <bbrezillon@kernel.org>
> > Cc: <stable@vger.kernel.org>
> > Cc: <linux-kernel@vger.kernel.org>
> > ---
> > Changes in v2:
> >   Enhance commit message
> >   Add dev_warn() in case user-defined i2c rate doesn't match LVR constraint
> >   Add dev_warn() in case user-defined i3c rate lower than i2c rate.
> > 
> >  drivers/i3c/master.c | 61 +++++++++++++++++++++++++++++++++++++++++-----------
> >  1 file changed, 48 insertions(+), 13 deletions(-)
> > 
> > diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
> > index 5f4bd52..8cd5824 100644
> > --- a/drivers/i3c/master.c
> > +++ b/drivers/i3c/master.c
> > @@ -91,6 +91,12 @@ void i3c_bus_normaluse_unlock(struct i3c_bus *bus)
> >  	up_read(&bus->lock);
> >  }
> >  
> > +static struct i3c_master_controller *
> > +i3c_bus_to_i3c_master(struct i3c_bus *i3cbus)
> > +{
> > +	return container_of(i3cbus, struct i3c_master_controller, bus);
> > +}
> > +
> >  static struct i3c_master_controller *dev_to_i3cmaster(struct device *dev)
> >  {
> >  	return container_of(dev, struct i3c_master_controller, dev);
> > @@ -565,20 +571,48 @@ static const struct device_type i3c_masterdev_type = {
> >  	.groups	= i3c_masterdev_groups,
> >  };
> >  
> > -int i3c_bus_set_mode(struct i3c_bus *i3cbus, enum i3c_bus_mode mode)
> > +int i3c_bus_set_mode(struct i3c_bus *i3cbus, enum i3c_bus_mode mode,
> > +		     unsigned long max_i2c_scl_rate)
> >  {
> > -	i3cbus->mode = mode;
> >  
> > -	if (!i3cbus->scl_rate.i3c)
> > -		i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
> > +	struct i3c_master_controller *master = i3c_bus_to_i3c_master(i3cbus);
> >  
> > -	if (!i3cbus->scl_rate.i2c) {
> > -		if (i3cbus->mode == I3C_BUS_MODE_MIXED_SLOW)
> > -			i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_SCL_RATE;
> > -		else
> > -			i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_PLUS_SCL_RATE;
> > +	i3cbus->mode = mode;
> > +
> > +	switch (i3cbus->mode) {
> > +	case I3C_BUS_MODE_PURE:
> > +		if (!i3cbus->scl_rate.i3c)
> > +			i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
> > +		break;
> > +	case I3C_BUS_MODE_MIXED_FAST:
> > +		if (!i3cbus->scl_rate.i3c)
> > +			i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
> > +		if (!i3cbus->scl_rate.i2c)
> > +			i3cbus->scl_rate.i2c = max_i2c_scl_rate;
> > +		break;
> > +	case I3C_BUS_MODE_MIXED_SLOW:
> > +		if (!i3cbus->scl_rate.i2c)
> > +			i3cbus->scl_rate.i2c = max_i2c_scl_rate;
> > +		if (!i3cbus->scl_rate.i3c ||
> > +		    i3cbus->scl_rate.i3c > i3cbus->scl_rate.i2c)
> > +			i3cbus->scl_rate.i3c = i3cbus->scl_rate.i2c;
> > +		break;
> > +	default:
> > +		return -EINVAL;
> >  	}
> >  
> > +	if (i3cbus->scl_rate.i3c < i3cbus->scl_rate.i2c)
> > +		dev_warn(&master->dev,
> > +			 "i3c-scl-hz=%ld lower than i2c-scl-hz=%ld\n",
> > +			 i3cbus->scl_rate.i3c, i3cbus->scl_rate.i2c);
> > +
> > +	if (i3cbus->scl_rate.i2c != I3C_BUS_I2C_FM_SCL_RATE &&
> > +	    i3cbus->scl_rate.i2c != I3C_BUS_I2C_FM_PLUS_SCL_RATE &&
> > +	    i3cbus->mode != I3C_BUS_MODE_PURE)
> 
> If you are so strict, there's clearly no point exposing an i2c-scl-hz
> property. I'm still not convinced having an i2c rate that's slower than
> what the I2C/I3C spec defines as the *typical* rate is a bad thing, 

I'm not been strictive, I just inform the user about that case.

> just
> like I'm not convinced having an I3C rate that's slower than the I2C
> one is a problem (it's definitely a weird situation, but there's nothing
> preventing that in the spec).

You agree that there is no point for case where i3c rate < i2c rate yet 
you are not convinced.
Do you thing that will be users for this case?

Anyway, this isn't a high requirement for me. The all point of this patch 
is to introduce the limited bus configuration.

> 
> > +		dev_warn(&master->dev,
> > +			 "i2c-scl-hz=%ld not defined according MIPI I3C spec\n"
> > +			 , i3cbus->scl_rate.i2c);
> 
> The comma should be on the previous line.
> 
> > +
> >  	/*
> >  	 * I3C/I2C frequency may have been overridden, check that user-provided
> >  	 * values are not exceeding max possible frequency.
> > @@ -1966,9 +2000,6 @@ of_i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master,
> >  	/* LVR is encoded in reg[2]. */
> >  	boardinfo->lvr = reg[2];
> >  
> > -	if (boardinfo->lvr & I3C_LVR_I2C_FM_MODE)
> > -		master->bus.scl_rate.i2c = I3C_BUS_I2C_FM_SCL_RATE;
> > -
> >  	list_add_tail(&boardinfo->node, &master->boardinfo.i2c);
> >  	of_node_get(node);
> >  
> > @@ -2417,6 +2448,7 @@ int i3c_master_register(struct i3c_master_controller *master,
> >  			const struct i3c_master_controller_ops *ops,
> >  			bool secondary)
> >  {
> > +	unsigned long i2c_scl_rate = I3C_BUS_I2C_FM_PLUS_SCL_RATE;
> >  	struct i3c_bus *i3cbus = i3c_master_get_bus(master);
> >  	enum i3c_bus_mode mode = I3C_BUS_MODE_PURE;
> >  	struct i2c_dev_boardinfo *i2cbi;
> > @@ -2466,9 +2498,12 @@ int i3c_master_register(struct i3c_master_controller *master,
> >  			ret = -EINVAL;
> >  			goto err_put_dev;
> >  		}
> > +
> > +		if (i2cbi->lvr & I3C_LVR_I2C_FM_MODE)
> > +			i2c_scl_rate = I3C_BUS_I2C_FM_SCL_RATE;
> >  	}
> >  
> > -	ret = i3c_bus_set_mode(i3cbus, mode);
> > +	ret = i3c_bus_set_mode(i3cbus, mode, i2c_scl_rate);
> >  	if (ret)
> >  		goto err_put_dev;
> >  

Best regards,
Vitor Soares

_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

Re: [PATCH v2 1/3] i3c: fix i2c and i3c scl rate by bus mode

[Boris Brezillon]

On Thu, 6 Jun 2019 17:16:55 +0000
Vitor Soares <Vitor.Soares@synopsys.com> wrote:

> From: Boris Brezillon <boris.brezillon@collabora.com>
> Date: Thu, Jun 06, 2019 at 15:18:44
> 
> > On Thu,  6 Jun 2019 16:00:01 +0200
> > Vitor Soares <Vitor.Soares@synopsys.com> wrote:
> >   
> > > Currently the I3C framework limits SCL frequency to FM speed when
> > > dealing with a mixed slow bus, even if all I2C devices are FM+ capable.
> > > 
> > > The core was also not accounting for I3C speed limitations when
> > > operating in mixed slow mode and was erroneously using FM+ speed as the
> > > max I2C speed when operating in mixed fast mode.
> > > 
> > > Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure")
> > > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> > > Cc: Boris Brezillon <bbrezillon@kernel.org>
> > > Cc: <stable@vger.kernel.org>
> > > Cc: <linux-kernel@vger.kernel.org>
> > > ---
> > > Changes in v2:
> > >   Enhance commit message
> > >   Add dev_warn() in case user-defined i2c rate doesn't match LVR constraint
> > >   Add dev_warn() in case user-defined i3c rate lower than i2c rate.
> > > 
> > >  drivers/i3c/master.c | 61 +++++++++++++++++++++++++++++++++++++++++-----------
> > >  1 file changed, 48 insertions(+), 13 deletions(-)
> > > 
> > > diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
> > > index 5f4bd52..8cd5824 100644
> > > --- a/drivers/i3c/master.c
> > > +++ b/drivers/i3c/master.c
> > > @@ -91,6 +91,12 @@ void i3c_bus_normaluse_unlock(struct i3c_bus *bus)
> > >  	up_read(&bus->lock);
> > >  }
> > >  
> > > +static struct i3c_master_controller *
> > > +i3c_bus_to_i3c_master(struct i3c_bus *i3cbus)
> > > +{
> > > +	return container_of(i3cbus, struct i3c_master_controller, bus);
> > > +}
> > > +
> > >  static struct i3c_master_controller *dev_to_i3cmaster(struct device *dev)
> > >  {
> > >  	return container_of(dev, struct i3c_master_controller, dev);
> > > @@ -565,20 +571,48 @@ static const struct device_type i3c_masterdev_type = {
> > >  	.groups	= i3c_masterdev_groups,
> > >  };
> > >  
> > > -int i3c_bus_set_mode(struct i3c_bus *i3cbus, enum i3c_bus_mode mode)
> > > +int i3c_bus_set_mode(struct i3c_bus *i3cbus, enum i3c_bus_mode mode,
> > > +		     unsigned long max_i2c_scl_rate)
> > >  {
> > > -	i3cbus->mode = mode;
> > >  
> > > -	if (!i3cbus->scl_rate.i3c)
> > > -		i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
> > > +	struct i3c_master_controller *master = i3c_bus_to_i3c_master(i3cbus);
> > >  
> > > -	if (!i3cbus->scl_rate.i2c) {
> > > -		if (i3cbus->mode == I3C_BUS_MODE_MIXED_SLOW)
> > > -			i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_SCL_RATE;
> > > -		else
> > > -			i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_PLUS_SCL_RATE;
> > > +	i3cbus->mode = mode;
> > > +
> > > +	switch (i3cbus->mode) {
> > > +	case I3C_BUS_MODE_PURE:
> > > +		if (!i3cbus->scl_rate.i3c)
> > > +			i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
> > > +		break;
> > > +	case I3C_BUS_MODE_MIXED_FAST:
> > > +		if (!i3cbus->scl_rate.i3c)
> > > +			i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
> > > +		if (!i3cbus->scl_rate.i2c)
> > > +			i3cbus->scl_rate.i2c = max_i2c_scl_rate;
> > > +		break;
> > > +	case I3C_BUS_MODE_MIXED_SLOW:
> > > +		if (!i3cbus->scl_rate.i2c)
> > > +			i3cbus->scl_rate.i2c = max_i2c_scl_rate;
> > > +		if (!i3cbus->scl_rate.i3c ||
> > > +		    i3cbus->scl_rate.i3c > i3cbus->scl_rate.i2c)
> > > +			i3cbus->scl_rate.i3c = i3cbus->scl_rate.i2c;
> > > +		break;
> > > +	default:
> > > +		return -EINVAL;
> > >  	}
> > >  
> > > +	if (i3cbus->scl_rate.i3c < i3cbus->scl_rate.i2c)
> > > +		dev_warn(&master->dev,
> > > +			 "i3c-scl-hz=%ld lower than i2c-scl-hz=%ld\n",
> > > +			 i3cbus->scl_rate.i3c, i3cbus->scl_rate.i2c);
> > > +
> > > +	if (i3cbus->scl_rate.i2c != I3C_BUS_I2C_FM_SCL_RATE &&
> > > +	    i3cbus->scl_rate.i2c != I3C_BUS_I2C_FM_PLUS_SCL_RATE &&
> > > +	    i3cbus->mode != I3C_BUS_MODE_PURE)  
> > 
> > If you are so strict, there's clearly no point exposing an i2c-scl-hz
> > property. I'm still not convinced having an i2c rate that's slower than
> > what the I2C/I3C spec defines as the *typical* rate is a bad thing,   
> 
> I'm not been strictive, I just inform the user about that case.

Then use dev_debug() and don't make the trace conditional on
i2c_rate != typical_rate. The only case where we should warn users
is i2c_rate > typical_rate, because that might lead to malfunctions.

> 
> > just
> > like I'm not convinced having an I3C rate that's slower than the I2C
> > one is a problem (it's definitely a weird situation, but there's nothing
> > preventing that in the spec).  
> 
> You agree that there is no point for case where i3c rate < i2c rate yet 
> you are not convinced.

I didn't say that, there might be use cases where one wants to slow
down the I3C bus to be able to probe it or use a slower rate when
things do not work properly. It's rather unlikely to happen, but I
don't think it deserves a warning message when that's the case.

> Do you thing that will be users for this case?
> 
> Anyway, this isn't a high requirement for me. The all point of this patch 
> is to introduce the limited bus configuration.

And yet, you keep insisting (and ignoring my feedback) on that point :P.

_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

RE: [PATCH v2 1/3] i3c: fix i2c and i3c scl rate by bus mode

[Vitor Soares]

From: Boris Brezillon <boris.brezillon@collabora.com>
Date: Thu, Jun 06, 2019 at 18:35:40

> On Thu, 6 Jun 2019 17:16:55 +0000
> Vitor Soares <Vitor.Soares@synopsys.com> wrote:
> 
> > From: Boris Brezillon <boris.brezillon@collabora.com>
> > Date: Thu, Jun 06, 2019 at 15:18:44
> > 
> > > On Thu,  6 Jun 2019 16:00:01 +0200
> > > Vitor Soares <Vitor.Soares@synopsys.com> wrote:
> > >   
> > > > Currently the I3C framework limits SCL frequency to FM speed when
> > > > dealing with a mixed slow bus, even if all I2C devices are FM+ capable.
> > > > 
> > > > The core was also not accounting for I3C speed limitations when
> > > > operating in mixed slow mode and was erroneously using FM+ speed as the
> > > > max I2C speed when operating in mixed fast mode.
> > > > 
> > > > Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure")
> > > > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> > > > Cc: Boris Brezillon <bbrezillon@kernel.org>
> > > > Cc: <stable@vger.kernel.org>
> > > > Cc: <linux-kernel@vger.kernel.org>
> > > > ---
> > > > Changes in v2:
> > > >   Enhance commit message
> > > >   Add dev_warn() in case user-defined i2c rate doesn't match LVR constraint
> > > >   Add dev_warn() in case user-defined i3c rate lower than i2c rate.
> > > > 
> > > >  drivers/i3c/master.c | 61 +++++++++++++++++++++++++++++++++++++++++-----------
> > > >  1 file changed, 48 insertions(+), 13 deletions(-)
> > > > 
> > > > diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
> > > > index 5f4bd52..8cd5824 100644
> > > > --- a/drivers/i3c/master.c
> > > > +++ b/drivers/i3c/master.c
> > > > @@ -91,6 +91,12 @@ void i3c_bus_normaluse_unlock(struct i3c_bus *bus)
> > > >  	up_read(&bus->lock);
> > > >  }
> > > >  
> > > > +static struct i3c_master_controller *
> > > > +i3c_bus_to_i3c_master(struct i3c_bus *i3cbus)
> > > > +{
> > > > +	return container_of(i3cbus, struct i3c_master_controller, bus);
> > > > +}
> > > > +
> > > >  static struct i3c_master_controller *dev_to_i3cmaster(struct device *dev)
> > > >  {
> > > >  	return container_of(dev, struct i3c_master_controller, dev);
> > > > @@ -565,20 +571,48 @@ static const struct device_type i3c_masterdev_type = {
> > > >  	.groups	= i3c_masterdev_groups,
> > > >  };
> > > >  
> > > > -int i3c_bus_set_mode(struct i3c_bus *i3cbus, enum i3c_bus_mode mode)
> > > > +int i3c_bus_set_mode(struct i3c_bus *i3cbus, enum i3c_bus_mode mode,
> > > > +		     unsigned long max_i2c_scl_rate)
> > > >  {
> > > > -	i3cbus->mode = mode;
> > > >  
> > > > -	if (!i3cbus->scl_rate.i3c)
> > > > -		i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
> > > > +	struct i3c_master_controller *master = i3c_bus_to_i3c_master(i3cbus);
> > > >  
> > > > -	if (!i3cbus->scl_rate.i2c) {
> > > > -		if (i3cbus->mode == I3C_BUS_MODE_MIXED_SLOW)
> > > > -			i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_SCL_RATE;
> > > > -		else
> > > > -			i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_PLUS_SCL_RATE;
> > > > +	i3cbus->mode = mode;
> > > > +
> > > > +	switch (i3cbus->mode) {
> > > > +	case I3C_BUS_MODE_PURE:
> > > > +		if (!i3cbus->scl_rate.i3c)
> > > > +			i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
> > > > +		break;
> > > > +	case I3C_BUS_MODE_MIXED_FAST:
> > > > +		if (!i3cbus->scl_rate.i3c)
> > > > +			i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
> > > > +		if (!i3cbus->scl_rate.i2c)
> > > > +			i3cbus->scl_rate.i2c = max_i2c_scl_rate;
> > > > +		break;
> > > > +	case I3C_BUS_MODE_MIXED_SLOW:
> > > > +		if (!i3cbus->scl_rate.i2c)
> > > > +			i3cbus->scl_rate.i2c = max_i2c_scl_rate;
> > > > +		if (!i3cbus->scl_rate.i3c ||
> > > > +		    i3cbus->scl_rate.i3c > i3cbus->scl_rate.i2c)
> > > > +			i3cbus->scl_rate.i3c = i3cbus->scl_rate.i2c;
> > > > +		break;
> > > > +	default:
> > > > +		return -EINVAL;
> > > >  	}
> > > >  
> > > > +	if (i3cbus->scl_rate.i3c < i3cbus->scl_rate.i2c)
> > > > +		dev_warn(&master->dev,
> > > > +			 "i3c-scl-hz=%ld lower than i2c-scl-hz=%ld\n",
> > > > +			 i3cbus->scl_rate.i3c, i3cbus->scl_rate.i2c);
> > > > +
> > > > +	if (i3cbus->scl_rate.i2c != I3C_BUS_I2C_FM_SCL_RATE &&
> > > > +	    i3cbus->scl_rate.i2c != I3C_BUS_I2C_FM_PLUS_SCL_RATE &&
> > > > +	    i3cbus->mode != I3C_BUS_MODE_PURE)  
> > > 
> > > If you are so strict, there's clearly no point exposing an i2c-scl-hz
> > > property. I'm still not convinced having an i2c rate that's slower than
> > > what the I2C/I3C spec defines as the *typical* rate is a bad thing,   
> > 
> > I'm not been strictive, I just inform the user about that case.
> 
> Then use dev_debug() and don't make the trace conditional on
> i2c_rate != typical_rate. 

Ok. I will change to dev_debug().

> The only case where we should warn users
> is i2c_rate > typical_rate, because that might lead to malfunctions.

Can you explain why?

> 
> > 
> > > just
> > > like I'm not convinced having an I3C rate that's slower than the I2C
> > > one is a problem (it's definitely a weird situation, but there's nothing
> > > preventing that in the spec).  
> > 
> > You agree that there is no point for case where i3c rate < i2c rate yet 
> > you are not convinced.
> 
> I didn't say that, there might be use cases where one wants to slow
> down the I3C bus to be able to probe it or use a slower rate when
> things do not work properly. It's rather unlikely to happen, but I
> don't think it deserves a warning message when that's the case.
> 
> > Do you thing that will be users for this case?
> > 
> > Anyway, this isn't a high requirement for me. The all point of this patch 
> > is to introduce the limited bus configuration.
> 
> And yet, you keep insisting (and ignoring my feedback) on that point :P.

If you check the previous version you see that I'm trying to follow 😉
I will change the dev_warn() to dev_dbg() due the trace is indeed too 
much.

Best regards,
Vitor Soares


_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

Re: [PATCH v2 1/3] i3c: fix i2c and i3c scl rate by bus mode

[Boris Brezillon]

On Thu, 6 Jun 2019 18:08:11 +0000
Vitor Soares <Vitor.Soares@synopsys.com> wrote:

> From: Boris Brezillon <boris.brezillon@collabora.com>
> Date: Thu, Jun 06, 2019 at 18:35:40
> 
> > On Thu, 6 Jun 2019 17:16:55 +0000
> > Vitor Soares <Vitor.Soares@synopsys.com> wrote:
> >   
> > > From: Boris Brezillon <boris.brezillon@collabora.com>
> > > Date: Thu, Jun 06, 2019 at 15:18:44
> > >   
> > > > On Thu,  6 Jun 2019 16:00:01 +0200
> > > > Vitor Soares <Vitor.Soares@synopsys.com> wrote:
> > > >     
> > > > > Currently the I3C framework limits SCL frequency to FM speed when
> > > > > dealing with a mixed slow bus, even if all I2C devices are FM+ capable.
> > > > > 
> > > > > The core was also not accounting for I3C speed limitations when
> > > > > operating in mixed slow mode and was erroneously using FM+ speed as the
> > > > > max I2C speed when operating in mixed fast mode.
> > > > > 
> > > > > Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure")
> > > > > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> > > > > Cc: Boris Brezillon <bbrezillon@kernel.org>
> > > > > Cc: <stable@vger.kernel.org>
> > > > > Cc: <linux-kernel@vger.kernel.org>
> > > > > ---
> > > > > Changes in v2:
> > > > >   Enhance commit message
> > > > >   Add dev_warn() in case user-defined i2c rate doesn't match LVR constraint
> > > > >   Add dev_warn() in case user-defined i3c rate lower than i2c rate.
> > > > > 
> > > > >  drivers/i3c/master.c | 61 +++++++++++++++++++++++++++++++++++++++++-----------
> > > > >  1 file changed, 48 insertions(+), 13 deletions(-)
> > > > > 
> > > > > diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
> > > > > index 5f4bd52..8cd5824 100644
> > > > > --- a/drivers/i3c/master.c
> > > > > +++ b/drivers/i3c/master.c
> > > > > @@ -91,6 +91,12 @@ void i3c_bus_normaluse_unlock(struct i3c_bus *bus)
> > > > >  	up_read(&bus->lock);
> > > > >  }
> > > > >  
> > > > > +static struct i3c_master_controller *
> > > > > +i3c_bus_to_i3c_master(struct i3c_bus *i3cbus)
> > > > > +{
> > > > > +	return container_of(i3cbus, struct i3c_master_controller, bus);
> > > > > +}
> > > > > +
> > > > >  static struct i3c_master_controller *dev_to_i3cmaster(struct device *dev)
> > > > >  {
> > > > >  	return container_of(dev, struct i3c_master_controller, dev);
> > > > > @@ -565,20 +571,48 @@ static const struct device_type i3c_masterdev_type = {
> > > > >  	.groups	= i3c_masterdev_groups,
> > > > >  };
> > > > >  
> > > > > -int i3c_bus_set_mode(struct i3c_bus *i3cbus, enum i3c_bus_mode mode)
> > > > > +int i3c_bus_set_mode(struct i3c_bus *i3cbus, enum i3c_bus_mode mode,
> > > > > +		     unsigned long max_i2c_scl_rate)
> > > > >  {
> > > > > -	i3cbus->mode = mode;
> > > > >  
> > > > > -	if (!i3cbus->scl_rate.i3c)
> > > > > -		i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
> > > > > +	struct i3c_master_controller *master = i3c_bus_to_i3c_master(i3cbus);
> > > > >  
> > > > > -	if (!i3cbus->scl_rate.i2c) {
> > > > > -		if (i3cbus->mode == I3C_BUS_MODE_MIXED_SLOW)
> > > > > -			i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_SCL_RATE;
> > > > > -		else
> > > > > -			i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_PLUS_SCL_RATE;
> > > > > +	i3cbus->mode = mode;
> > > > > +
> > > > > +	switch (i3cbus->mode) {
> > > > > +	case I3C_BUS_MODE_PURE:
> > > > > +		if (!i3cbus->scl_rate.i3c)
> > > > > +			i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
> > > > > +		break;
> > > > > +	case I3C_BUS_MODE_MIXED_FAST:
> > > > > +		if (!i3cbus->scl_rate.i3c)
> > > > > +			i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
> > > > > +		if (!i3cbus->scl_rate.i2c)
> > > > > +			i3cbus->scl_rate.i2c = max_i2c_scl_rate;
> > > > > +		break;
> > > > > +	case I3C_BUS_MODE_MIXED_SLOW:
> > > > > +		if (!i3cbus->scl_rate.i2c)
> > > > > +			i3cbus->scl_rate.i2c = max_i2c_scl_rate;
> > > > > +		if (!i3cbus->scl_rate.i3c ||
> > > > > +		    i3cbus->scl_rate.i3c > i3cbus->scl_rate.i2c)
> > > > > +			i3cbus->scl_rate.i3c = i3cbus->scl_rate.i2c;
> > > > > +		break;
> > > > > +	default:
> > > > > +		return -EINVAL;
> > > > >  	}
> > > > >  
> > > > > +	if (i3cbus->scl_rate.i3c < i3cbus->scl_rate.i2c)
> > > > > +		dev_warn(&master->dev,
> > > > > +			 "i3c-scl-hz=%ld lower than i2c-scl-hz=%ld\n",
> > > > > +			 i3cbus->scl_rate.i3c, i3cbus->scl_rate.i2c);
> > > > > +
> > > > > +	if (i3cbus->scl_rate.i2c != I3C_BUS_I2C_FM_SCL_RATE &&
> > > > > +	    i3cbus->scl_rate.i2c != I3C_BUS_I2C_FM_PLUS_SCL_RATE &&
> > > > > +	    i3cbus->mode != I3C_BUS_MODE_PURE)    
> > > > 
> > > > If you are so strict, there's clearly no point exposing an i2c-scl-hz
> > > > property. I'm still not convinced having an i2c rate that's slower than
> > > > what the I2C/I3C spec defines as the *typical* rate is a bad thing,     
> > > 
> > > I'm not been strictive, I just inform the user about that case.  
> > 
> > Then use dev_debug() and don't make the trace conditional on
> > i2c_rate != typical_rate.   
> 
> Ok. I will change to dev_debug().
> 
> > The only case where we should warn users
> > is i2c_rate > typical_rate, because that might lead to malfunctions.  
> 
> Can you explain why?

Because the speed is limited by the device capabilities. Using a slower
freq works, driving the SLC line faster than what's supported by I2C
slaves doesn't.

> 
> >   
> > >   
> > > > just
> > > > like I'm not convinced having an I3C rate that's slower than the I2C
> > > > one is a problem (it's definitely a weird situation, but there's nothing
> > > > preventing that in the spec).    
> > > 
> > > You agree that there is no point for case where i3c rate < i2c rate yet 
> > > you are not convinced.  
> > 
> > I didn't say that, there might be use cases where one wants to slow
> > down the I3C bus to be able to probe it or use a slower rate when
> > things do not work properly. It's rather unlikely to happen, but I
> > don't think it deserves a warning message when that's the case.
> >   
> > > Do you thing that will be users for this case?
> > > 
> > > Anyway, this isn't a high requirement for me. The all point of this patch 
> > > is to introduce the limited bus configuration.  
> > 
> > And yet, you keep insisting (and ignoring my feedback) on that point :P.  
> 
> If you check the previous version you see that I'm trying to follow 😉
> I will change the dev_warn() to dev_dbg() due the trace is indeed too 
> much.

I have the feeling that you endlessly argue on details while the vast
majority of changes are okay, which means we both spend a lot of time
on things that are not super important.

_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c