* [PATCH v3 1/3] regmap: add i3c bus support
2019-07-10 14:56 [PATCH v3 0/3] Add ST lsm6dso i3c support Vitor Soares
@ 2019-07-10 14:56 ` Vitor Soares
2019-07-10 15:02 ` Mark Brown
2019-07-10 14:56 ` [PATCH v3 2/3] i3c: move i3c_device_match_id to device.c and export it Vitor Soares
2019-07-10 14:56 ` [PATCH v3 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR Vitor Soares
2 siblings, 1 reply; 9+ messages in thread
From: Vitor Soares @ 2019-07-10 14:56 UTC (permalink / raw)
To: linux-iio, linux-i3c, linux-kernel
Cc: Joao.Pinto, rafael, gregkh, Vitor Soares, broonie, bbrezillon, lorenzo
Add basic support for i3c bus.
This is a simple implementation that only give support
for SDR Read and Write commands.
Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
---
drivers/base/regmap/Kconfig | 6 +++-
drivers/base/regmap/Makefile | 1 +
drivers/base/regmap/regmap-i3c.c | 60 ++++++++++++++++++++++++++++++++++++++++
include/linux/regmap.h | 20 ++++++++++++++
4 files changed, 86 insertions(+), 1 deletion(-)
create mode 100644 drivers/base/regmap/regmap-i3c.c
diff --git a/drivers/base/regmap/Kconfig b/drivers/base/regmap/Kconfig
index 6ad5ef4..c8bbf53 100644
--- a/drivers/base/regmap/Kconfig
+++ b/drivers/base/regmap/Kconfig
@@ -4,7 +4,7 @@
# subsystems should select the appropriate symbols.
config REGMAP
- default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ)
+ default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ || REGMAP_I3C)
select IRQ_DOMAIN if REGMAP_IRQ
bool
@@ -49,3 +49,7 @@ config REGMAP_SOUNDWIRE
config REGMAP_SCCB
tristate
depends on I2C
+
+config REGMAP_I3C
+ tristate
+ depends on I3C
diff --git a/drivers/base/regmap/Makefile b/drivers/base/regmap/Makefile
index f5b4e88..ff6c7d8 100644
--- a/drivers/base/regmap/Makefile
+++ b/drivers/base/regmap/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_REGMAP_IRQ) += regmap-irq.o
obj-$(CONFIG_REGMAP_W1) += regmap-w1.o
obj-$(CONFIG_REGMAP_SOUNDWIRE) += regmap-sdw.o
obj-$(CONFIG_REGMAP_SCCB) += regmap-sccb.o
+obj-$(CONFIG_REGMAP_I3C) += regmap-i3c.o
diff --git a/drivers/base/regmap/regmap-i3c.c b/drivers/base/regmap/regmap-i3c.c
new file mode 100644
index 0000000..1578fb5
--- /dev/null
+++ b/drivers/base/regmap/regmap-i3c.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Synopsys, Inc. and/or its affiliates.
+
+#include <linux/regmap.h>
+#include <linux/i3c/device.h>
+#include <linux/i3c/master.h>
+#include <linux/module.h>
+
+static int regmap_i3c_write(void *context, const void *data, size_t count)
+{
+ struct device *dev = context;
+ struct i3c_device *i3c = dev_to_i3cdev(dev);
+ struct i3c_priv_xfer xfers[] = {
+ {
+ .rnw = false,
+ .len = count,
+ .data.out = data,
+ },
+ };
+
+ return i3c_device_do_priv_xfers(i3c, xfers, 1);
+}
+
+static int regmap_i3c_read(void *context,
+ const void *reg, size_t reg_size,
+ void *val, size_t val_size)
+{
+ struct device *dev = context;
+ struct i3c_device *i3c = dev_to_i3cdev(dev);
+ struct i3c_priv_xfer xfers[2];
+
+ xfers[0].rnw = false;
+ xfers[0].len = reg_size;
+ xfers[0].data.out = reg;
+
+ xfers[1].rnw = true;
+ xfers[1].len = val_size;
+ xfers[1].data.in = val;
+
+ return i3c_device_do_priv_xfers(i3c, xfers, 2);
+}
+
+static struct regmap_bus regmap_i3c = {
+ .write = regmap_i3c_write,
+ .read = regmap_i3c_read,
+};
+
+struct regmap *__devm_regmap_init_i3c(struct i3c_device *i3c,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name)
+{
+ return __devm_regmap_init(&i3c->dev, ®map_i3c, &i3c->dev, config,
+ lock_key, lock_name);
+}
+EXPORT_SYMBOL_GPL(__devm_regmap_init_i3c);
+
+MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>");
+MODULE_DESCRIPTION("Regmap I3C Module");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index daeec7d..f65984d 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -25,6 +25,7 @@ struct module;
struct clk;
struct device;
struct i2c_client;
+struct i3c_device;
struct irq_domain;
struct slim_device;
struct spi_device;
@@ -624,6 +625,10 @@ struct regmap *__devm_regmap_init_slimbus(struct slim_device *slimbus,
const struct regmap_config *config,
struct lock_class_key *lock_key,
const char *lock_name);
+struct regmap *__devm_regmap_init_i3c(struct i3c_device *i3c,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name);
/*
* Wrapper for regmap_init macros to include a unique lockdep key and name
* for each call. No-op if CONFIG_LOCKDEP is not set.
@@ -982,6 +987,21 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg);
#define devm_regmap_init_slimbus(slimbus, config) \
__regmap_lockdep_wrapper(__devm_regmap_init_slimbus, #config, \
slimbus, config)
+
+/**
+ * devm_regmap_init_i3c() - Initialise managed register map
+ *
+ * @i3c: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap. The regmap will be automatically freed by the
+ * device management code.
+ */
+#define devm_regmap_init_i3c(i3c, config) \
+ __regmap_lockdep_wrapper(__devm_regmap_init_i3c, #config, \
+ i3c, config)
+
int regmap_mmio_attach_clk(struct regmap *map, struct clk *clk);
void regmap_mmio_detach_clk(struct regmap *map);
void regmap_exit(struct regmap *map);
--
2.7.4
_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH v3 1/3] regmap: add i3c bus support
2019-07-10 14:56 ` [PATCH v3 1/3] regmap: add i3c bus support Vitor Soares
@ 2019-07-10 15:02 ` Mark Brown
0 siblings, 0 replies; 9+ messages in thread
From: Mark Brown @ 2019-07-10 15:02 UTC (permalink / raw)
To: Vitor Soares
Cc: Joao.Pinto, rafael, linux-iio, gregkh, linux-kernel, linux-i3c,
lorenzo, bbrezillon
[-- Attachment #1.1: Type: text/plain, Size: 483 bytes --]
On Wed, Jul 10, 2019 at 04:56:37PM +0200, Vitor Soares wrote:
> Add basic support for i3c bus.
> This is a simple implementation that only give support
> for SDR Read and Write commands.
Please do not submit new versions of already applied patches, please
submit incremental updates to the existing code. Modifying existing
commits creates problems for other users building on top of those
commits so it's best practice to only change pubished git commits if
absolutely essential.
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
[-- Attachment #2: Type: text/plain, Size: 155 bytes --]
_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v3 2/3] i3c: move i3c_device_match_id to device.c and export it
2019-07-10 14:56 [PATCH v3 0/3] Add ST lsm6dso i3c support Vitor Soares
2019-07-10 14:56 ` [PATCH v3 1/3] regmap: add i3c bus support Vitor Soares
@ 2019-07-10 14:56 ` Vitor Soares
2019-07-10 14:56 ` [PATCH v3 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR Vitor Soares
2 siblings, 0 replies; 9+ messages in thread
From: Vitor Soares @ 2019-07-10 14:56 UTC (permalink / raw)
To: linux-iio, linux-i3c, linux-kernel
Cc: Joao.Pinto, rafael, gregkh, Vitor Soares, broonie, bbrezillon, lorenzo
The i3c device driver needs the i3c_device_id table.
Lets move it to device.c and export it to be used.
Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
---
Changes in v3:
Remove i3c_get_device_id
Move i3c_device_match_id from drivers/i3c/master.c to drivers/i3c/device.c
Export i3c_device_match_id
Changes in v2:
move this function to drivers/i3c/device.c
drivers/i3c/device.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/i3c/master.c | 45 ---------------------------------------------
include/linux/i3c/device.h | 4 ++++
3 files changed, 50 insertions(+), 45 deletions(-)
diff --git a/drivers/i3c/device.c b/drivers/i3c/device.c
index 69cc040..383df3b 100644
--- a/drivers/i3c/device.c
+++ b/drivers/i3c/device.c
@@ -200,6 +200,52 @@ struct i3c_device *dev_to_i3cdev(struct device *dev)
}
EXPORT_SYMBOL_GPL(dev_to_i3cdev);
+const struct i3c_device_id *
+i3c_device_match_id(struct i3c_device *i3cdev,
+ const struct i3c_device_id *id_table)
+{
+ struct i3c_device_info devinfo;
+ const struct i3c_device_id *id;
+
+ i3c_device_get_info(i3cdev, &devinfo);
+
+ /*
+ * The lower 32bits of the provisional ID is just filled with a random
+ * value, try to match using DCR info.
+ */
+ if (!I3C_PID_RND_LOWER_32BITS(devinfo.pid)) {
+ u16 manuf = I3C_PID_MANUF_ID(devinfo.pid);
+ u16 part = I3C_PID_PART_ID(devinfo.pid);
+ u16 ext_info = I3C_PID_EXTRA_INFO(devinfo.pid);
+
+ /* First try to match by manufacturer/part ID. */
+ for (id = id_table; id->match_flags != 0; id++) {
+ if ((id->match_flags & I3C_MATCH_MANUF_AND_PART) !=
+ I3C_MATCH_MANUF_AND_PART)
+ continue;
+
+ if (manuf != id->manuf_id || part != id->part_id)
+ continue;
+
+ if ((id->match_flags & I3C_MATCH_EXTRA_INFO) &&
+ ext_info != id->extra_info)
+ continue;
+
+ return id;
+ }
+ }
+
+ /* Fallback to DCR match. */
+ for (id = id_table; id->match_flags != 0; id++) {
+ if ((id->match_flags & I3C_MATCH_DCR) &&
+ id->dcr == devinfo.dcr)
+ return id;
+ }
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(i3c_device_match_id);
+
/**
* i3c_driver_register_with_owner() - register an I3C device driver
*
diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index 5f4bd52..7667f84 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -270,51 +270,6 @@ static const struct device_type i3c_device_type = {
.uevent = i3c_device_uevent,
};
-static const struct i3c_device_id *
-i3c_device_match_id(struct i3c_device *i3cdev,
- const struct i3c_device_id *id_table)
-{
- struct i3c_device_info devinfo;
- const struct i3c_device_id *id;
-
- i3c_device_get_info(i3cdev, &devinfo);
-
- /*
- * The lower 32bits of the provisional ID is just filled with a random
- * value, try to match using DCR info.
- */
- if (!I3C_PID_RND_LOWER_32BITS(devinfo.pid)) {
- u16 manuf = I3C_PID_MANUF_ID(devinfo.pid);
- u16 part = I3C_PID_PART_ID(devinfo.pid);
- u16 ext_info = I3C_PID_EXTRA_INFO(devinfo.pid);
-
- /* First try to match by manufacturer/part ID. */
- for (id = id_table; id->match_flags != 0; id++) {
- if ((id->match_flags & I3C_MATCH_MANUF_AND_PART) !=
- I3C_MATCH_MANUF_AND_PART)
- continue;
-
- if (manuf != id->manuf_id || part != id->part_id)
- continue;
-
- if ((id->match_flags & I3C_MATCH_EXTRA_INFO) &&
- ext_info != id->extra_info)
- continue;
-
- return id;
- }
- }
-
- /* Fallback to DCR match. */
- for (id = id_table; id->match_flags != 0; id++) {
- if ((id->match_flags & I3C_MATCH_DCR) &&
- id->dcr == devinfo.dcr)
- return id;
- }
-
- return NULL;
-}
-
static int i3c_device_match(struct device *dev, struct device_driver *drv)
{
struct i3c_device *i3cdev;
diff --git a/include/linux/i3c/device.h b/include/linux/i3c/device.h
index 5ecb055..de102e4 100644
--- a/include/linux/i3c/device.h
+++ b/include/linux/i3c/device.h
@@ -188,6 +188,10 @@ static inline struct i3c_driver *drv_to_i3cdrv(struct device_driver *drv)
struct device *i3cdev_to_dev(struct i3c_device *i3cdev);
struct i3c_device *dev_to_i3cdev(struct device *dev);
+const struct i3c_device_id *
+i3c_device_match_id(struct i3c_device *i3cdev,
+ const struct i3c_device_id *id_table);
+
static inline void i3cdev_set_drvdata(struct i3c_device *i3cdev,
void *data)
{
--
2.7.4
_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v3 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
2019-07-10 14:56 [PATCH v3 0/3] Add ST lsm6dso i3c support Vitor Soares
2019-07-10 14:56 ` [PATCH v3 1/3] regmap: add i3c bus support Vitor Soares
2019-07-10 14:56 ` [PATCH v3 2/3] i3c: move i3c_device_match_id to device.c and export it Vitor Soares
@ 2019-07-10 14:56 ` Vitor Soares
2019-07-10 19:44 ` Lorenzo Bianconi
2 siblings, 1 reply; 9+ messages in thread
From: Vitor Soares @ 2019-07-10 14:56 UTC (permalink / raw)
To: linux-iio, linux-i3c, linux-kernel
Cc: Joao.Pinto, rafael, gregkh, Vitor Soares, broonie, bbrezillon, lorenzo
For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in
spi and i2c mode.
The LSM6DSO and LSM6DSR are also i3c capable so lets give i3c support to
them.
Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
Changes in v3:
Remove unnecessary st_lsm6dsx_i3c_data table used to hold device name
Use st_lsm6dsx_probe new form
Changes in v2:
Add support for LSM6DSR
Set pm_ops to st_lsm6dsx_pm_ops
drivers/iio/imu/st_lsm6dsx/Kconfig | 8 +++-
drivers/iio/imu/st_lsm6dsx/Makefile | 1 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 61 +++++++++++++++++++++++++++++
3 files changed, 69 insertions(+), 1 deletion(-)
create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
index 9e59297..6b5a73c 100644
--- a/drivers/iio/imu/st_lsm6dsx/Kconfig
+++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
@@ -1,11 +1,12 @@
config IIO_ST_LSM6DSX
tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors"
- depends on (I2C || SPI)
+ depends on (I2C || SPI || I3C)
select IIO_BUFFER
select IIO_KFIFO_BUF
select IIO_ST_LSM6DSX_I2C if (I2C)
select IIO_ST_LSM6DSX_SPI if (SPI_MASTER)
+ select IIO_ST_LSM6DSX_I3C if (I3C)
help
Say yes here to build support for STMicroelectronics LSM6DSx imu
sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
@@ -23,3 +24,8 @@ config IIO_ST_LSM6DSX_SPI
tristate
depends on IIO_ST_LSM6DSX
select REGMAP_SPI
+
+config IIO_ST_LSM6DSX_I3C
+ tristate
+ depends on IIO_ST_LSM6DSX
+ select REGMAP_I3C
diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile
index e5f733c..c676965 100644
--- a/drivers/iio/imu/st_lsm6dsx/Makefile
+++ b/drivers/iio/imu/st_lsm6dsx/Makefile
@@ -4,3 +4,4 @@ st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \
obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o
obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o
obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o
+obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
new file mode 100644
index 0000000..f683754
--- /dev/null
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates.
+ *
+ * Author: Vitor Soares <vitor.soares@synopsys.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i3c/device.h>
+#include <linux/i3c/master.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#include "st_lsm6dsx.h"
+
+static const struct i3c_device_id st_lsm6dsx_i3c_ids[];
+
+static const struct regmap_config st_lsm6dsx_i3c_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev)
+{
+ const struct i3c_device_id *id = i3c_device_match_id(i3cdev,
+ st_lsm6dsx_i3c_ids);
+ struct regmap *regmap;
+ int hw_id = (int)id->data;
+
+ regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n",
+ (int)PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ return st_lsm6dsx_probe(&i3cdev->dev, 0, hw_id, regmap);
+}
+
+static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = {
+ I3C_DEVICE(0x0104, 0x006C, (void *)ST_LSM6DSO_ID),
+ I3C_DEVICE(0x0104, 0x006B, (void *)ST_LSM6DSR_ID),
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids);
+
+static struct i3c_driver st_lsm6dsx_driver = {
+ .driver = {
+ .name = "st_lsm6dsx_i3c",
+ .pm = &st_lsm6dsx_pm_ops,
+ },
+ .probe = st_lsm6dsx_i3c_probe,
+ .id_table = st_lsm6dsx_i3c_ids,
+};
+module_i3c_driver(st_lsm6dsx_driver);
+
+MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>");
+MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH v3 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
2019-07-10 14:56 ` [PATCH v3 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR Vitor Soares
@ 2019-07-10 19:44 ` Lorenzo Bianconi
2019-07-11 10:12 ` Vitor Soares
0 siblings, 1 reply; 9+ messages in thread
From: Lorenzo Bianconi @ 2019-07-10 19:44 UTC (permalink / raw)
To: Vitor Soares
Cc: Joao.Pinto, rafael, linux-iio, gregkh, linux-kernel, broonie,
linux-i3c, bbrezillon
[-- Attachment #1.1: Type: text/plain, Size: 3424 bytes --]
> For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in
> spi and i2c mode.
>
> The LSM6DSO and LSM6DSR are also i3c capable so lets give i3c support to
> them.
Hi Vitor,
just few comments inline.
Regards,
Lorenzo
>
> Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
> ---
> Changes in v3:
> Remove unnecessary st_lsm6dsx_i3c_data table used to hold device name
> Use st_lsm6dsx_probe new form
>
> Changes in v2:
> Add support for LSM6DSR
> Set pm_ops to st_lsm6dsx_pm_ops
>
> drivers/iio/imu/st_lsm6dsx/Kconfig | 8 +++-
> drivers/iio/imu/st_lsm6dsx/Makefile | 1 +
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 61 +++++++++++++++++++++++++++++
> 3 files changed, 69 insertions(+), 1 deletion(-)
> create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
>
[...]
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> new file mode 100644
> index 0000000..f683754
> --- /dev/null
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> @@ -0,0 +1,61 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates.
> + *
> + * Author: Vitor Soares <vitor.soares@synopsys.com>
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/i3c/device.h>
> +#include <linux/i3c/master.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +
> +#include "st_lsm6dsx.h"
> +
> +static const struct i3c_device_id st_lsm6dsx_i3c_ids[];
> +
why do we need this? I guess you can just move st_lsm6dsx_i3c_ids definition here
> +static const struct regmap_config st_lsm6dsx_i3c_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +};
> +
> +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev)
> +{
> + const struct i3c_device_id *id = i3c_device_match_id(i3cdev,
> + st_lsm6dsx_i3c_ids);
i3c_device_match_id can theoretically fail so is it better to check
return value here? (maybe I am too paranoid :))
> + struct regmap *regmap;
> + int hw_id = (int)id->data;
I guess we do not need this since we use it just in st_lsm6dsx_probe(),
we can just do:
return st_lsm6dsx_probe(&i3cdev->dev, 0, (int)id->data, regmap);
> +
> + regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config);
> + if (IS_ERR(regmap)) {
> + dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n",
> + (int)PTR_ERR(regmap));
> + return PTR_ERR(regmap);
> + }
> +
> + return st_lsm6dsx_probe(&i3cdev->dev, 0, hw_id, regmap);
> +}
> +
> +static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = {
> + I3C_DEVICE(0x0104, 0x006C, (void *)ST_LSM6DSO_ID),
> + I3C_DEVICE(0x0104, 0x006B, (void *)ST_LSM6DSR_ID),
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids);
> +
> +static struct i3c_driver st_lsm6dsx_driver = {
> + .driver = {
> + .name = "st_lsm6dsx_i3c",
> + .pm = &st_lsm6dsx_pm_ops,
> + },
> + .probe = st_lsm6dsx_i3c_probe,
> + .id_table = st_lsm6dsx_i3c_ids,
> +};
> +module_i3c_driver(st_lsm6dsx_driver);
> +
> +MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>");
> +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.7.4
>
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 155 bytes --]
_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
^ permalink raw reply [flat|nested] 9+ messages in thread* RE: [PATCH v3 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
2019-07-10 19:44 ` Lorenzo Bianconi
@ 2019-07-11 10:12 ` Vitor Soares
2019-07-11 11:00 ` Vitor Soares
0 siblings, 1 reply; 9+ messages in thread
From: Vitor Soares @ 2019-07-11 10:12 UTC (permalink / raw)
To: Lorenzo Bianconi, Vitor Soares
Cc: Joao.Pinto, rafael, linux-iio, gregkh, linux-kernel, broonie,
linux-i3c, bbrezillon
Hi Lorenzo,
From: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Wed, Jul 10, 2019 at 20:44:05
> > For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in
> > spi and i2c mode.
> >
> > The LSM6DSO and LSM6DSR are also i3c capable so lets give i3c support to
> > them.
>
> Hi Vitor,
>
> just few comments inline.
>
> Regards,
> Lorenzo
>
> >
> > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> > Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
> > ---
> > Changes in v3:
> > Remove unnecessary st_lsm6dsx_i3c_data table used to hold device name
> > Use st_lsm6dsx_probe new form
> >
> > Changes in v2:
> > Add support for LSM6DSR
> > Set pm_ops to st_lsm6dsx_pm_ops
> >
> > drivers/iio/imu/st_lsm6dsx/Kconfig | 8 +++-
> > drivers/iio/imu/st_lsm6dsx/Makefile | 1 +
> > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 61 +++++++++++++++++++++++++++++
> > 3 files changed, 69 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> >
>
> [...]
>
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> > new file mode 100644
> > index 0000000..f683754
> > --- /dev/null
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> > @@ -0,0 +1,61 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates.
> > + *
> > + * Author: Vitor Soares <vitor.soares@synopsys.com>
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/i3c/device.h>
> > +#include <linux/i3c/master.h>
> > +#include <linux/slab.h>
> > +#include <linux/of.h>
> > +#include <linux/regmap.h>
> > +
> > +#include "st_lsm6dsx.h"
> > +
> > +static const struct i3c_device_id st_lsm6dsx_i3c_ids[];
> > +
>
> why do we need this? I guess you can just move st_lsm6dsx_i3c_ids definition here
>
> > +static const struct regmap_config st_lsm6dsx_i3c_regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > +};
> > +
> > +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev)
> > +{
> > + const struct i3c_device_id *id = i3c_device_match_id(i3cdev,
> > + st_lsm6dsx_i3c_ids);
>
> i3c_device_match_id can theoretically fail so is it better to check
> return value here? (maybe I am too paranoid :))
>
> > + struct regmap *regmap;
> > + int hw_id = (int)id->data;
>
> I guess we do not need this since we use it just in st_lsm6dsx_probe(),
> we can just do:
>
> return st_lsm6dsx_probe(&i3cdev->dev, 0, (int)id->data, regmap);
> > +
> > + regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config);
> > + if (IS_ERR(regmap)) {
> > + dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n",
> > + (int)PTR_ERR(regmap));
> > + return PTR_ERR(regmap);
> > + }
> > +
> > + return st_lsm6dsx_probe(&i3cdev->dev, 0, hw_id, regmap);
> > +}
> > +
> > +static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = {
> > + I3C_DEVICE(0x0104, 0x006C, (void *)ST_LSM6DSO_ID),
> > + I3C_DEVICE(0x0104, 0x006B, (void *)ST_LSM6DSR_ID),
> > + { /* sentinel */ },
> > +};
> > +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids);
> > +
> > +static struct i3c_driver st_lsm6dsx_driver = {
> > + .driver = {
> > + .name = "st_lsm6dsx_i3c",
> > + .pm = &st_lsm6dsx_pm_ops,
> > + },
> > + .probe = st_lsm6dsx_i3c_probe,
> > + .id_table = st_lsm6dsx_i3c_ids,
> > +};
> > +module_i3c_driver(st_lsm6dsx_driver);
> > +
> > +MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>");
> > +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver");
> > +MODULE_LICENSE("GPL v2");
> > --
> > 2.7.4
> >
Thanks for your comments. I will address them and send a new version.
Best regards,
Vitor Soares
_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
^ permalink raw reply [flat|nested] 9+ messages in thread* RE: [PATCH v3 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
2019-07-11 10:12 ` Vitor Soares
@ 2019-07-11 11:00 ` Vitor Soares
2019-07-11 12:44 ` Lorenzo Bianconi
0 siblings, 1 reply; 9+ messages in thread
From: Vitor Soares @ 2019-07-11 11:00 UTC (permalink / raw)
To: Vitor Soares, Lorenzo Bianconi, Vitor Soares
Cc: Joao.Pinto, rafael, linux-iio, gregkh, linux-kernel, broonie,
linux-i3c, bbrezillon
From: Vitor Soares <soares@synopsys.com>
Date: Thu, Jul 11, 2019 at 11:12:34
> Hi Lorenzo,
>
> From: Lorenzo Bianconi <lorenzo@kernel.org>
> Date: Wed, Jul 10, 2019 at 20:44:05
>
> > > For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in
> > > spi and i2c mode.
> > >
> > > The LSM6DSO and LSM6DSR are also i3c capable so lets give i3c support to
> > > them.
> >
> > Hi Vitor,
> >
> > just few comments inline.
> >
> > Regards,
> > Lorenzo
> >
> > >
> > > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> > > Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
> > > ---
> > > Changes in v3:
> > > Remove unnecessary st_lsm6dsx_i3c_data table used to hold device name
> > > Use st_lsm6dsx_probe new form
> > >
> > > Changes in v2:
> > > Add support for LSM6DSR
> > > Set pm_ops to st_lsm6dsx_pm_ops
> > >
> > > drivers/iio/imu/st_lsm6dsx/Kconfig | 8 +++-
> > > drivers/iio/imu/st_lsm6dsx/Makefile | 1 +
> > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 61 +++++++++++++++++++++++++++++
> > > 3 files changed, 69 insertions(+), 1 deletion(-)
> > > create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> > >
> >
> > [...]
> > > +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev)
> > > +{
> > > + const struct i3c_device_id *id = i3c_device_match_id(i3cdev,
> > > + st_lsm6dsx_i3c_ids);
> >
> > i3c_device_match_id can theoretically fail so is it better to check
> > return value here? (maybe I am too paranoid :))
I was preparing the patch and if the i3c_device_match_id() fail it return
NULL so the st_lsm6dsx_probe() will fail automatically.
Checking the spi_get_device_id(), the drivers don't test the return value
too.
Do you think it is really necessary to test it before the
st_lsm6dsx_probe() function?
Best regards,
Vitor Soares
_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH v3 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
2019-07-11 11:00 ` Vitor Soares
@ 2019-07-11 12:44 ` Lorenzo Bianconi
0 siblings, 0 replies; 9+ messages in thread
From: Lorenzo Bianconi @ 2019-07-11 12:44 UTC (permalink / raw)
To: Vitor Soares
Cc: Joao.Pinto, rafael, linux-iio, gregkh, linux-kernel, broonie,
linux-i3c, bbrezillon
[-- Attachment #1.1: Type: text/plain, Size: 2120 bytes --]
> From: Vitor Soares <soares@synopsys.com>
> Date: Thu, Jul 11, 2019 at 11:12:34
>
> > Hi Lorenzo,
> >
> > From: Lorenzo Bianconi <lorenzo@kernel.org>
> > Date: Wed, Jul 10, 2019 at 20:44:05
> >
> > > > For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in
> > > > spi and i2c mode.
> > > >
> > > > The LSM6DSO and LSM6DSR are also i3c capable so lets give i3c support to
> > > > them.
> > >
> > > Hi Vitor,
> > >
> > > just few comments inline.
> > >
> > > Regards,
> > > Lorenzo
> > >
> > > >
> > > > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> > > > Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
> > > > ---
> > > > Changes in v3:
> > > > Remove unnecessary st_lsm6dsx_i3c_data table used to hold device name
> > > > Use st_lsm6dsx_probe new form
> > > >
> > > > Changes in v2:
> > > > Add support for LSM6DSR
> > > > Set pm_ops to st_lsm6dsx_pm_ops
> > > >
> > > > drivers/iio/imu/st_lsm6dsx/Kconfig | 8 +++-
> > > > drivers/iio/imu/st_lsm6dsx/Makefile | 1 +
> > > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 61 +++++++++++++++++++++++++++++
> > > > 3 files changed, 69 insertions(+), 1 deletion(-)
> > > > create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> > > >
> > >
> > > [...]
> > > > +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev)
> > > > +{
> > > > + const struct i3c_device_id *id = i3c_device_match_id(i3cdev,
> > > > + st_lsm6dsx_i3c_ids);
> > >
> > > i3c_device_match_id can theoretically fail so is it better to check
> > > return value here? (maybe I am too paranoid :))
>
> I was preparing the patch and if the i3c_device_match_id() fail it return
> NULL so the st_lsm6dsx_probe() will fail automatically.
> Checking the spi_get_device_id(), the drivers don't test the return value
> too.
multiple drivers deference it directly so I am fine to skip this check.
Regards,
Lorenzo
>
> Do you think it is really necessary to test it before the
> st_lsm6dsx_probe() function?
>
> Best regards,
> Vitor Soares
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 155 bytes --]
_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
^ permalink raw reply [flat|nested] 9+ messages in thread