Linux-i3c Archive on
 help / color / Atom feed
From: Vitor Soares <>
	Vitor Soares <>,
Subject: [RFC 0/2] Add secondary master
Date: Thu, 28 Nov 2019 02:15:10 +0100
Message-ID: <> (raw)

As agreed I'm sharing with you my secondary master approach based on
[1] and [2]. It is not my goal to use this as alternative solution to
[1] and [2] but to provide you feedback about my challenges. Futher the
following patch should be considered as final work.

During proposal of [1] and [2] I was't able to compile the code directly and
dad need to adjust them to be able to compile dw-i3c-master and found that
they didn'd address my use case.

Apart of what already was done IMO:
  - We may have a secondary master struct to embbed master and slave rules.
  - Algorithm to define the way masters share bus ownership
  - Delay a tranfers when secondary master doesn't bus ownership.


Vitor Soares (2):
  i3c: Add prliminary support for secondary master
  i3c: dw: add preliminary support for sec master

 drivers/i3c/master.c               | 365 +++++++++++++++++++++-
 drivers/i3c/master/dw-i3c-master.c | 619 +++++++++++++++++++++++++++++++++----
 include/linux/i3c/master.h         |  39 +++
 3 files changed, 959 insertions(+), 64 deletions(-)


linux-i3c mailing list

             reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-28  1:15 Vitor Soares [this message]
2019-11-28  1:15 ` [RFC 1/2] i3c: Add preliminary support for " Vitor Soares
2019-11-28  5:50   ` Przemyslaw Gaj
2019-11-28 12:20     ` Vitor Soares
2019-11-28 12:58       ` Przemyslaw Gaj
2019-11-28 15:50         ` Vitor Soares
2019-11-28 17:01           ` Przemyslaw Gaj
2019-11-28  1:15 ` [RFC 2/2] i3c: dw: add preliminary support for sec master Vitor Soares

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-i3c Archive on

Archives are clonable:
	git clone --mirror linux-i3c/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-i3c linux-i3c/ \
	public-inbox-index linux-i3c

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone