linux-i3c.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Vitor Soares <Vitor.Soares@synopsys.com>
To: linux-iio@vger.kernel.org, linux-i3c@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Joao.Pinto@synopsys.com, bbrezillon@kernel.org,
	gregkh@linuxfoundation.org, rafael@kernel.org,
	Vitor Soares <Vitor.Soares@synopsys.com>,
	lorenzo@kernel.org
Subject: [PATCH v4 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
Date: Fri, 12 Jul 2019 13:53:30 +0200	[thread overview]
Message-ID: <f239834a6b8bd179094cdc19a3ac5ecaf807cee3.1562931742.git.vitor.soares@synopsys.com> (raw)
In-Reply-To: <cover.1562931742.git.vitor.soares@synopsys.com>
In-Reply-To: <cover.1562931742.git.vitor.soares@synopsys.com>

For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in
spi and i2c mode.

The LSM6DSO and LSM6DSR are also i3c capable so lets give i3c support to
them.

Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
Changes in v4:
  Remove hw_id variable

Changes in v3:
  Remove unnecessary st_lsm6dsx_i3c_data table used to hold device name
  Use st_lsm6dsx_probe new form

Changes in v2:
  Add support for LSM6DSR
  Set pm_ops to st_lsm6dsx_pm_ops

 drivers/iio/imu/st_lsm6dsx/Kconfig          |  8 +++-
 drivers/iio/imu/st_lsm6dsx/Makefile         |  1 +
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 58 +++++++++++++++++++++++++++++
 3 files changed, 66 insertions(+), 1 deletion(-)
 create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c

diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
index 9e59297..6b5a73c 100644
--- a/drivers/iio/imu/st_lsm6dsx/Kconfig
+++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
@@ -1,11 +1,12 @@
 
 config IIO_ST_LSM6DSX
 	tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors"
-	depends on (I2C || SPI)
+	depends on (I2C || SPI || I3C)
 	select IIO_BUFFER
 	select IIO_KFIFO_BUF
 	select IIO_ST_LSM6DSX_I2C if (I2C)
 	select IIO_ST_LSM6DSX_SPI if (SPI_MASTER)
+	select IIO_ST_LSM6DSX_I3C if (I3C)
 	help
 	  Say yes here to build support for STMicroelectronics LSM6DSx imu
 	  sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
@@ -23,3 +24,8 @@ config IIO_ST_LSM6DSX_SPI
 	tristate
 	depends on IIO_ST_LSM6DSX
 	select REGMAP_SPI
+
+config IIO_ST_LSM6DSX_I3C
+	tristate
+	depends on IIO_ST_LSM6DSX
+	select REGMAP_I3C
diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile
index e5f733c..c676965 100644
--- a/drivers/iio/imu/st_lsm6dsx/Makefile
+++ b/drivers/iio/imu/st_lsm6dsx/Makefile
@@ -4,3 +4,4 @@ st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \
 obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o
 obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o
 obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o
+obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
new file mode 100644
index 0000000..2e89524
--- /dev/null
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates.
+ *
+ * Author: Vitor Soares <vitor.soares@synopsys.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i3c/device.h>
+#include <linux/i3c/master.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#include "st_lsm6dsx.h"
+
+static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = {
+	I3C_DEVICE(0x0104, 0x006C, (void *)ST_LSM6DSO_ID),
+	I3C_DEVICE(0x0104, 0x006B, (void *)ST_LSM6DSR_ID),
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids);
+
+static const struct regmap_config st_lsm6dsx_i3c_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev)
+{
+	const struct i3c_device_id *id = i3c_device_match_id(i3cdev,
+							    st_lsm6dsx_i3c_ids);
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n",
+			(int)PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	return st_lsm6dsx_probe(&i3cdev->dev, 0, (int)id->data, regmap);
+}
+
+static struct i3c_driver st_lsm6dsx_driver = {
+	.driver = {
+		.name = "st_lsm6dsx_i3c",
+		.pm = &st_lsm6dsx_pm_ops,
+	},
+	.probe = st_lsm6dsx_i3c_probe,
+	.id_table = st_lsm6dsx_i3c_ids,
+};
+module_i3c_driver(st_lsm6dsx_driver);
+
+MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>");
+MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4


_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

  parent reply	other threads:[~2019-07-12 11:53 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-12 11:53 [PATCH v4 0/3] Add ST lsm6dso i3c support Vitor Soares
2019-07-12 11:53 ` [PATCH v4 1/3] regmap: add i3c bus support Vitor Soares
2019-07-12 15:59   ` Boris Brezillon
2019-07-12 16:14     ` Vitor Soares
2019-07-12 11:53 ` [PATCH v4 2/3] i3c: move i3c_device_match_id to device.c and export it Vitor Soares
2019-07-12 16:03   ` Boris Brezillon
2019-07-12 16:21     ` Vitor Soares
2019-07-12 16:34       ` Boris Brezillon
2019-07-12 11:53 ` Vitor Soares [this message]
2019-07-12 16:14   ` [PATCH v4 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR Boris Brezillon
2019-07-12 16:28     ` Vitor Soares
2019-07-12 16:43       ` Boris Brezillon
2019-07-12 18:40         ` Vitor Soares
2019-07-12 20:03           ` Boris Brezillon
2019-07-16 13:22             ` Vitor Soares
2019-07-16 13:40               ` Boris Brezillon
2019-07-12 15:58 ` [PATCH v4 0/3] Add ST lsm6dso i3c support Boris Brezillon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f239834a6b8bd179094cdc19a3ac5ecaf807cee3.1562931742.git.vitor.soares@synopsys.com \
    --to=vitor.soares@synopsys.com \
    --cc=Joao.Pinto@synopsys.com \
    --cc=bbrezillon@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-i3c@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo@kernel.org \
    --cc=rafael@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).