Linux-ide Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH RESEND v2 0/2] Convert Atari Falcon IDE driver to platform device
@ 2019-09-26  3:54 Michael Schmitz
  2019-09-26  3:54 ` [PATCH RESEND v2 1/2] m68k/atari: add platform device for Falcon IDE port Michael Schmitz
                   ` (3 more replies)
  0 siblings, 4 replies; 29+ messages in thread
From: Michael Schmitz @ 2019-09-26  3:54 UTC (permalink / raw)
  To: linux-m68k, linux-ide; +Cc: geert, b.zolnierkie


[Resend because linux-m68k was dropped from the recipient list ...]

As suggested by Geert, at least one of the drivers available for the Falcon
IDE interface should be converted to a platform device driver (to enable
module autoloading by the Debian installer).

Add platform device for Falcon IDE (patch 1), and rewrite the present
libata driver to make use of that device (patch 2).

Changes from v1: 

Incorporated review comments by Geert; corrected silly mismatch between
platform device name and platform driver name that caused loading driver
to fail locating the related resource; check return code of platform device
register call.

Tested on ARAnyM with only the pata_falcon driver builtin.

Cheers,

	Michael


^ permalink raw reply	[flat|nested] 29+ messages in thread

end of thread, back to index

Thread overview: 29+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-26  3:54 [PATCH RESEND v2 0/2] Convert Atari Falcon IDE driver to platform device Michael Schmitz
2019-09-26  3:54 ` [PATCH RESEND v2 1/2] m68k/atari: add platform device for Falcon IDE port Michael Schmitz
2019-11-04 10:56   ` Geert Uytterhoeven
2019-11-04 21:09     ` Michael Schmitz
2019-11-05  6:37       ` [PATCH] ide: falconide: convert to platform driver Michael Schmitz
2019-11-05  8:11         ` Geert Uytterhoeven
2019-11-05 18:31           ` Michael Schmitz
2019-11-05 18:46             ` Geert Uytterhoeven
2019-11-05 20:02               ` Michael Schmitz
2019-11-05 21:13                 ` Michael Schmitz
2019-11-05 21:43                   ` Geert Uytterhoeven
2019-11-06  1:35                     ` Michael Schmitz
2019-11-05  6:43       ` [PATCH RESEND v2 1/2] m68k/atari: add platform device for Falcon IDE port Michael Schmitz
2019-09-26  3:54 ` [PATCH RESEND v2 2/2] drivers/ata: convert pata_falcon to arch platform device Michael Schmitz
2019-11-04 10:58   ` Geert Uytterhoeven
2019-10-25 20:33 ` [PATCH RESEND v2 0/2] Convert Atari Falcon IDE driver to " Jens Axboe
2019-10-26 18:17   ` Geert Uytterhoeven
2019-10-28  7:03     ` Michael Schmitz
2019-11-04 11:04       ` Geert Uytterhoeven
2019-11-04 19:17         ` Michael Schmitz
2019-11-04 20:06           ` Geert Uytterhoeven
2019-11-04 21:10           ` John Paul Adrian Glaubitz
2019-11-04 21:21             ` Michael Schmitz
2019-11-04 21:42               ` John Paul Adrian Glaubitz
2019-11-05  6:57                 ` Michael Schmitz
2019-11-06  1:34                   ` Michael Schmitz
2019-11-06  2:47 ` [PATCH v3] m68k/atari: convert legacy Falcon IDE driver to platform driver Michael Schmitz
2019-11-18  9:20   ` Geert Uytterhoeven
2019-11-18  9:41     ` John Paul Adrian Glaubitz

Linux-ide Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-ide/0 linux-ide/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-ide linux-ide/ https://lore.kernel.org/linux-ide \
		linux-ide@vger.kernel.org
	public-inbox-index linux-ide

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-ide


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git