* [PATCH 1/8] acard_ahci: use dma_set_mask_and_coherent
2019-06-24 7:12 libata dma_set_mask cleanups Christoph Hellwig
@ 2019-06-24 7:12 ` Christoph Hellwig
2019-06-24 7:12 ` [PATCH 2/8] ahci: " Christoph Hellwig
` (6 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Christoph Hellwig @ 2019-06-24 7:12 UTC (permalink / raw)
To: Jens Axboe, Bartlomiej Zolnierkiewicz, Mikael Pettersson; +Cc: linux-ide
Use the dma_set_mask_and_coherent helper to set the DMA mask. Rely
on the relatively recent change that setting a larger than required
mask will never fail to avoid the need for the boilerplate 32-bit
fallback code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/ata/acard-ahci.c | 38 +++++---------------------------------
1 file changed, 5 insertions(+), 33 deletions(-)
diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c
index b1b49dbd0b14..c67d6eb92d68 100644
--- a/drivers/ata/acard-ahci.c
+++ b/drivers/ata/acard-ahci.c
@@ -160,37 +160,6 @@ static int acard_ahci_pci_device_resume(struct pci_dev *pdev)
}
#endif
-static int acard_ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
-{
- int rc;
-
- if (using_dac &&
- !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
- rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
- if (rc) {
- rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (rc) {
- dev_err(&pdev->dev,
- "64-bit DMA enable failed\n");
- return rc;
- }
- }
- } else {
- rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (rc) {
- dev_err(&pdev->dev, "32-bit DMA enable failed\n");
- return rc;
- }
- rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (rc) {
- dev_err(&pdev->dev,
- "32-bit consistent DMA enable failed\n");
- return rc;
- }
- }
- return 0;
-}
-
static void acard_ahci_pci_print_info(struct ata_host *host)
{
struct pci_dev *pdev = to_pci_dev(host->dev);
@@ -472,9 +441,12 @@ static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id
}
/* initialize adapter */
- rc = acard_ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
- if (rc)
+ rc = dma_set_mask_and_coherent(&pdev->dev,
+ DMA_BIT_MASK((hpriv->cap & HOST_CAP_64) ? 64 : 32));
+ if (rc) {
+ dev_err(&pdev->dev, "DMA enable failed\n");
return rc;
+ }
rc = ahci_reset_controller(host);
if (rc)
--
2.20.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 2/8] ahci: use dma_set_mask_and_coherent
2019-06-24 7:12 libata dma_set_mask cleanups Christoph Hellwig
2019-06-24 7:12 ` [PATCH 1/8] acard_ahci: use dma_set_mask_and_coherent Christoph Hellwig
@ 2019-06-24 7:12 ` Christoph Hellwig
2019-06-24 7:12 ` [PATCH 3/8] pdc_adma: " Christoph Hellwig
` (5 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Christoph Hellwig @ 2019-06-24 7:12 UTC (permalink / raw)
To: Jens Axboe, Bartlomiej Zolnierkiewicz, Mikael Pettersson; +Cc: linux-ide
Use the dma_set_mask_and_coherent helper to set the DMA mask. Rely
on the relatively recent change that setting a larger than required
mask will never fail to avoid the need for the boilerplate 32-bit
fallback code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/ata/ahci.c | 33 ++++++++-------------------------
1 file changed, 8 insertions(+), 25 deletions(-)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index f7652baa6337..ad840f20f8e2 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -901,40 +901,23 @@ static int ahci_pci_device_resume(struct device *dev)
static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
{
+ const int dma_bits = using_dac ? 64 : 32;
int rc;
/*
* If the device fixup already set the dma_mask to some non-standard
* value, don't extend it here. This happens on STA2X11, for example.
+ *
+ * XXX: manipulating the DMA mask from platform code is completely
+ * bogus, platform code should use dev->bus_dma_mask instead..
*/
if (pdev->dma_mask && pdev->dma_mask < DMA_BIT_MASK(32))
return 0;
- if (using_dac &&
- !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
- rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
- if (rc) {
- rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (rc) {
- dev_err(&pdev->dev,
- "64-bit DMA enable failed\n");
- return rc;
- }
- }
- } else {
- rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (rc) {
- dev_err(&pdev->dev, "32-bit DMA enable failed\n");
- return rc;
- }
- rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (rc) {
- dev_err(&pdev->dev,
- "32-bit consistent DMA enable failed\n");
- return rc;
- }
- }
- return 0;
+ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(dma_bits));
+ if (rc)
+ dev_err(&pdev->dev, "DMA enable failed\n");
+ return rc;
}
static void ahci_pci_print_info(struct ata_host *host)
--
2.20.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 3/8] pdc_adma: use dma_set_mask_and_coherent
2019-06-24 7:12 libata dma_set_mask cleanups Christoph Hellwig
2019-06-24 7:12 ` [PATCH 1/8] acard_ahci: use dma_set_mask_and_coherent Christoph Hellwig
2019-06-24 7:12 ` [PATCH 2/8] ahci: " Christoph Hellwig
@ 2019-06-24 7:12 ` Christoph Hellwig
2019-06-24 7:12 ` [PATCH 4/8] sata_mv: " Christoph Hellwig
` (4 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Christoph Hellwig @ 2019-06-24 7:12 UTC (permalink / raw)
To: Jens Axboe, Bartlomiej Zolnierkiewicz, Mikael Pettersson; +Cc: linux-ide
Use the dma_set_mask_and_coherent helper to set the DMA mask. Rely
on the relatively recent change that setting a larger than required
mask will never fail to avoid the need for the boilerplate 32-bit
fallback code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/ata/pdc_adma.c | 23 ++++-------------------
1 file changed, 4 insertions(+), 19 deletions(-)
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 52fa8606a25f..965727af569b 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -573,23 +573,6 @@ static void adma_host_init(struct ata_host *host, unsigned int chip_id)
adma_reset_engine(host->ports[port_no]);
}
-static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
-{
- int rc;
-
- rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (rc) {
- dev_err(&pdev->dev, "32-bit DMA enable failed\n");
- return rc;
- }
- rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (rc) {
- dev_err(&pdev->dev, "32-bit consistent DMA enable failed\n");
- return rc;
- }
- return 0;
-}
-
static int adma_ata_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -620,9 +603,11 @@ static int adma_ata_init_one(struct pci_dev *pdev,
host->iomap = pcim_iomap_table(pdev);
mmio_base = host->iomap[ADMA_MMIO_BAR];
- rc = adma_set_dma_masks(pdev, mmio_base);
- if (rc)
+ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
+ }
for (port_no = 0; port_no < ADMA_PORTS; ++port_no) {
struct ata_port *ap = host->ports[port_no];
--
2.20.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 4/8] sata_mv: use dma_set_mask_and_coherent
2019-06-24 7:12 libata dma_set_mask cleanups Christoph Hellwig
` (2 preceding siblings ...)
2019-06-24 7:12 ` [PATCH 3/8] pdc_adma: " Christoph Hellwig
@ 2019-06-24 7:12 ` Christoph Hellwig
2019-06-24 7:12 ` [PATCH 5/8] sata_nv: " Christoph Hellwig
` (3 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Christoph Hellwig @ 2019-06-24 7:12 UTC (permalink / raw)
To: Jens Axboe, Bartlomiej Zolnierkiewicz, Mikael Pettersson; +Cc: linux-ide
Use the dma_set_mask_and_coherent helper to set the DMA mask. Rely
on the relatively recent change that setting a larger than required
mask will never fail to avoid the need for the boilerplate 32-bit
fallback code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/ata/sata_mv.c | 38 ++++----------------------------------
1 file changed, 4 insertions(+), 34 deletions(-)
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index da585d2bded6..ad385a113391 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -4314,38 +4314,6 @@ static struct pci_driver mv_pci_driver = {
};
-/* move to PCI layer or libata core? */
-static int pci_go_64(struct pci_dev *pdev)
-{
- int rc;
-
- if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
- rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
- if (rc) {
- rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (rc) {
- dev_err(&pdev->dev,
- "64-bit DMA enable failed\n");
- return rc;
- }
- }
- } else {
- rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (rc) {
- dev_err(&pdev->dev, "32-bit DMA enable failed\n");
- return rc;
- }
- rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (rc) {
- dev_err(&pdev->dev,
- "32-bit consistent DMA enable failed\n");
- return rc;
- }
- }
-
- return rc;
-}
-
/**
* mv_print_info - Dump key info to kernel log for perusal.
* @host: ATA host to print info about
@@ -4430,9 +4398,11 @@ static int mv_pci_init_one(struct pci_dev *pdev,
host->iomap = pcim_iomap_table(pdev);
hpriv->base = host->iomap[MV_PRIMARY_BAR];
- rc = pci_go_64(pdev);
- if (rc)
+ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+ if (rc) {
+ dev_err(&pdev->dev, "DMA enable failed\n");
return rc;
+ }
rc = mv_create_dma_pools(hpriv, &pdev->dev);
if (rc)
--
2.20.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 5/8] sata_nv: use dma_set_mask_and_coherent
2019-06-24 7:12 libata dma_set_mask cleanups Christoph Hellwig
` (3 preceding siblings ...)
2019-06-24 7:12 ` [PATCH 4/8] sata_mv: " Christoph Hellwig
@ 2019-06-24 7:12 ` Christoph Hellwig
2019-06-24 7:12 ` [PATCH 6/8] sata_qstor: " Christoph Hellwig
` (2 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Christoph Hellwig @ 2019-06-24 7:12 UTC (permalink / raw)
To: Jens Axboe, Bartlomiej Zolnierkiewicz, Mikael Pettersson; +Cc: linux-ide
Use the dma_set_mask_and_coherent helper to set the DMA mask. Rely
on the relatively recent change that setting a larger than required
mask will never fail to avoid the need for the boilerplate 32-bit
fallback code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/ata/sata_nv.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 54bfab15c74a..194cb167d359 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -1122,14 +1122,10 @@ static int nv_adma_port_start(struct ata_port *ap)
/*
* Now that the legacy PRD and padding buffer are allocated we can
- * try to raise the DMA mask to allocate the CPB/APRD table.
+ * raise the DMA mask to allocate the CPB/APRD table.
*/
- rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
- if (rc) {
- rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
- if (rc)
- return rc;
- }
+ dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+
pp->adma_dma_mask = *dev->dma_mask;
mem = dmam_alloc_coherent(dev, NV_ADMA_PORT_PRIV_DMA_SZ,
--
2.20.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 6/8] sata_qstor: use dma_set_mask_and_coherent
2019-06-24 7:12 libata dma_set_mask cleanups Christoph Hellwig
` (4 preceding siblings ...)
2019-06-24 7:12 ` [PATCH 5/8] sata_nv: " Christoph Hellwig
@ 2019-06-24 7:12 ` Christoph Hellwig
2019-06-24 7:12 ` [PATCH 7/8] sata_sil24: " Christoph Hellwig
2019-06-24 7:12 ` [PATCH 8/8] libata: switch remaining drivers to " Christoph Hellwig
7 siblings, 0 replies; 10+ messages in thread
From: Christoph Hellwig @ 2019-06-24 7:12 UTC (permalink / raw)
To: Jens Axboe, Bartlomiej Zolnierkiewicz, Mikael Pettersson; +Cc: linux-ide
Use the dma_set_mask_and_coherent helper to set the DMA mask. Rely
on the relatively recent change that setting a larger than required
mask will never fail to avoid the need for the boilerplate 32-bit
fallback code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/ata/sata_qstor.c | 34 +++++++---------------------------
1 file changed, 7 insertions(+), 27 deletions(-)
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 7ec0c216a6a6..5e44bdce9a23 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -538,33 +538,13 @@ static void qs_host_init(struct ata_host *host, unsigned int chip_id)
static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
{
u32 bus_info = readl(mmio_base + QS_HID_HPHY);
- int rc, have_64bit_bus = (bus_info & QS_HPHY_64BIT);
-
- if (have_64bit_bus &&
- !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
- rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
- if (rc) {
- rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (rc) {
- dev_err(&pdev->dev,
- "64-bit DMA enable failed\n");
- return rc;
- }
- }
- } else {
- rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (rc) {
- dev_err(&pdev->dev, "32-bit DMA enable failed\n");
- return rc;
- }
- rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (rc) {
- dev_err(&pdev->dev,
- "32-bit consistent DMA enable failed\n");
- return rc;
- }
- }
- return 0;
+ int dma_bits = (bus_info & QS_HPHY_64BIT) ? 64 : 32;
+ int rc;
+
+ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(dma_bits));
+ if (rc)
+ dev_err(&pdev->dev, "%d-bit DMA enable failed\n", dma_bits);
+ return rc;
}
static int qs_ata_init_one(struct pci_dev *pdev,
--
2.20.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 7/8] sata_sil24: use dma_set_mask_and_coherent
2019-06-24 7:12 libata dma_set_mask cleanups Christoph Hellwig
` (5 preceding siblings ...)
2019-06-24 7:12 ` [PATCH 6/8] sata_qstor: " Christoph Hellwig
@ 2019-06-24 7:12 ` Christoph Hellwig
2019-06-24 7:12 ` [PATCH 8/8] libata: switch remaining drivers to " Christoph Hellwig
7 siblings, 0 replies; 10+ messages in thread
From: Christoph Hellwig @ 2019-06-24 7:12 UTC (permalink / raw)
To: Jens Axboe, Bartlomiej Zolnierkiewicz, Mikael Pettersson; +Cc: linux-ide
Use the dma_set_mask_and_coherent helper to set the DMA mask. Rely
on the relatively recent change that setting a larger than required
mask will never fail to avoid the need for the boilerplate 32-bit
fallback code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/ata/sata_sil24.c | 26 ++++----------------------
1 file changed, 4 insertions(+), 22 deletions(-)
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index bfdf41912588..1efb280715d1 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -1302,28 +1302,10 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
host->iomap = iomap;
/* configure and activate the device */
- if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
- rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
- if (rc) {
- rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (rc) {
- dev_err(&pdev->dev,
- "64-bit DMA enable failed\n");
- return rc;
- }
- }
- } else {
- rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (rc) {
- dev_err(&pdev->dev, "32-bit DMA enable failed\n");
- return rc;
- }
- rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (rc) {
- dev_err(&pdev->dev,
- "32-bit consistent DMA enable failed\n");
- return rc;
- }
+ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+ if (rc) {
+ dev_err(&pdev->dev, "DMA enable failed\n");
+ return rc;
}
/* Set max read request size to 4096. This slightly increases
--
2.20.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 8/8] libata: switch remaining drivers to use dma_set_mask_and_coherent
2019-06-24 7:12 libata dma_set_mask cleanups Christoph Hellwig
` (6 preceding siblings ...)
2019-06-24 7:12 ` [PATCH 7/8] sata_sil24: " Christoph Hellwig
@ 2019-06-24 7:12 ` Christoph Hellwig
7 siblings, 0 replies; 10+ messages in thread
From: Christoph Hellwig @ 2019-06-24 7:12 UTC (permalink / raw)
To: Jens Axboe, Bartlomiej Zolnierkiewicz, Mikael Pettersson; +Cc: linux-ide
Use dma_set_mask_and_coherent instead of separate dma_set_mask and
dma_set_coherent_mask calls.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/ata/libata-sff.c | 8 +-------
drivers/ata/pata_atp867x.c | 7 +------
drivers/ata/pata_cs5520.c | 6 +-----
drivers/ata/pata_hpt3x3.c | 5 +----
drivers/ata/pata_ninja32.c | 5 +----
drivers/ata/pata_pdc2027x.c | 6 +-----
drivers/ata/pata_sil680.c | 5 +----
drivers/ata/sata_inic162x.c | 8 +-------
drivers/ata/sata_promise.c | 5 +----
drivers/ata/sata_sil.c | 5 +----
drivers/ata/sata_svw.c | 5 +----
drivers/ata/sata_sx4.c | 5 +----
drivers/ata/sata_via.c | 9 +--------
drivers/ata/sata_vsc.c | 5 +----
14 files changed, 14 insertions(+), 70 deletions(-)
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 10aa27882142..d911514de05c 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -3147,15 +3147,9 @@ void ata_pci_bmdma_init(struct ata_host *host)
* ->sff_irq_clear method. Try to initialize bmdma_addr
* regardless of dma masks.
*/
- rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
+ rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
if (rc)
ata_bmdma_nodma(host, "failed to set dma mask");
- if (!rc) {
- rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
- if (rc)
- ata_bmdma_nodma(host,
- "failed to set consistent dma mask");
- }
/* request and iomap DMA region */
rc = pcim_iomap_regions(pdev, 1 << 4, dev_driver_string(gdev));
diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
index 2b9ed4ddef8d..cfd0cf2cbca6 100644
--- a/drivers/ata/pata_atp867x.c
+++ b/drivers/ata/pata_atp867x.c
@@ -463,12 +463,7 @@ static int atp867x_ata_pci_sff_init_host(struct ata_host *host)
atp867x_fixup(host);
- rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
- if (rc)
- return rc;
-
- rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
- return rc;
+ return dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
}
static int atp867x_init_one(struct pci_dev *pdev,
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 099a5c68a4c9..9052148b306d 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -155,14 +155,10 @@ static int cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
return -ENODEV;
}
- if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
+ if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32))) {
printk(KERN_ERR DRV_NAME ": unable to configure DMA mask.\n");
return -ENODEV;
}
- if (dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) {
- printk(KERN_ERR DRV_NAME ": unable to configure consistent DMA mask.\n");
- return -ENODEV;
- }
/* Map IO ports and initialize host accordingly */
iomap[0] = devm_ioport_map(&pdev->dev, cmd_port[0], 8);
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index b2fc023783b1..83974d5eb387 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -221,10 +221,7 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
if (rc)
return rc;
host->iomap = pcim_iomap_table(pdev);
- rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
- if (rc)
- return rc;
- rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
+ rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index 607db1f05f9a..f9255d6fd194 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -123,10 +123,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
return rc;
host->iomap = pcim_iomap_table(dev);
- rc = dma_set_mask(&dev->dev, ATA_DMA_MASK);
- if (rc)
- return rc;
- rc = dma_set_coherent_mask(&dev->dev, ATA_DMA_MASK);
+ rc = dma_set_mask_and_coherent(&dev->dev, ATA_DMA_MASK);
if (rc)
return rc;
pci_set_master(dev);
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index b656e1536855..de834fbb6dfe 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -722,11 +722,7 @@ static int pdc2027x_init_one(struct pci_dev *pdev,
return rc;
host->iomap = pcim_iomap_table(pdev);
- rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
- if (rc)
- return rc;
-
- rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
+ rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index c14071be4f55..7ab9aea3b630 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -374,10 +374,7 @@ static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
host->iomap = pcim_iomap_table(pdev);
/* Setup DMA masks */
- rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
- if (rc)
- return rc;
- rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
+ rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
pci_set_master(pdev);
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 790968497dfe..7f99e23bff88 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -862,18 +862,12 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
}
/* Set dma_mask. This devices doesn't support 64bit addressing. */
- rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
- rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (rc) {
- dev_err(&pdev->dev, "32-bit consistent DMA enable failed\n");
- return rc;
- }
-
rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl);
if (rc) {
dev_err(&pdev->dev, "failed to initialize controller\n");
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index f4dfec3b6e42..5fd464765ddc 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -1230,10 +1230,7 @@ static int pdc_ata_init_one(struct pci_dev *pdev,
/* initialize adapter */
pdc_host_init(host);
- rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
- if (rc)
- return rc;
- rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
+ rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 25b6a52be5ab..e6fbae2f645a 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -757,10 +757,7 @@ static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
return rc;
host->iomap = pcim_iomap_table(pdev);
- rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
- if (rc)
- return rc;
- rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
+ rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index b903d55c6c20..f8552559db7f 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -471,10 +471,7 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en
ata_port_pbar_desc(ap, 5, offset, "port");
}
- rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
- if (rc)
- return rc;
- rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
+ rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index ae8e374d0a77..2277ba0c9c7f 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -1470,10 +1470,7 @@ static int pdc_sata_init_one(struct pci_dev *pdev,
}
/* configure and activate */
- rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
- if (rc)
- return rc;
- rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
+ rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index fcb9245b184f..c7891cc84ea0 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -505,14 +505,7 @@ static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
for (i = 0; i < host->n_ports; i++)
vt6421_init_addrs(host->ports[i]);
- rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
- if (rc)
- return rc;
- rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
- if (rc)
- return rc;
-
- return 0;
+ return dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
}
static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index fd401e9164ef..8fa952cb9f7f 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -371,10 +371,7 @@ static int vsc_sata_init_one(struct pci_dev *pdev,
/*
* Use 32 bit DMA mask, because 64 bit address support is poor.
*/
- rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (rc)
- return rc;
- rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (rc)
return rc;
--
2.20.1
^ permalink raw reply related [flat|nested] 10+ messages in thread