Linux-ide Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH AUTOSEL 5.1 150/219] libata: don't request sense data on !ZAC ATA devices
       [not found] <20190715140341.6443-1-sashal@kernel.org>
@ 2019-07-15 14:02 ` Sasha Levin
  0 siblings, 0 replies; only message in thread
From: Sasha Levin @ 2019-07-15 14:02 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Tejun Heo, Hannes Reinecke, Masato Suzuki, Damien Le Moal,
	Jens Axboe, Sasha Levin, linux-ide

From: Tejun Heo <tj@kernel.org>

[ Upstream commit ca156e006add67e4beea7896be395160735e09b0 ]

ZAC support added sense data requesting on error for both ZAC and ATA
devices. This seems to cause erratic error handling behaviors on some
SSDs where the device reports sense data availability and then
delivers the wrong content making EH take the wrong actions.  The
failure mode was sporadic on a LITE-ON ssd and couldn't be reliably
reproduced.

There is no value in requesting sense data from non-ZAC ATA devices
while there's a significant risk of introducing EH misbehaviors which
are difficult to reproduce and fix.  Let's do the sense data dancing
only for ZAC devices.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Masato Suzuki <masato.suzuki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/libata-eh.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 938ed513b070..6215680418c4 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1486,7 +1486,7 @@ static int ata_eh_read_log_10h(struct ata_device *dev,
 	tf->hob_lbah = buf[10];
 	tf->nsect = buf[12];
 	tf->hob_nsect = buf[13];
-	if (ata_id_has_ncq_autosense(dev->id))
+	if (dev->class == ATA_DEV_ZAC && ata_id_has_ncq_autosense(dev->id))
 		tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16];
 
 	return 0;
@@ -1733,7 +1733,8 @@ void ata_eh_analyze_ncq_error(struct ata_link *link)
 	memcpy(&qc->result_tf, &tf, sizeof(tf));
 	qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
 	qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ;
-	if ((qc->result_tf.command & ATA_SENSE) || qc->result_tf.auxiliary) {
+	if (dev->class == ATA_DEV_ZAC &&
+	    ((qc->result_tf.command & ATA_SENSE) || qc->result_tf.auxiliary)) {
 		char sense_key, asc, ascq;
 
 		sense_key = (qc->result_tf.auxiliary >> 16) & 0xff;
@@ -1787,10 +1788,11 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
 	}
 
 	switch (qc->dev->class) {
-	case ATA_DEV_ATA:
 	case ATA_DEV_ZAC:
 		if (stat & ATA_SENSE)
 			ata_eh_request_sense(qc, qc->scsicmd);
+		/* fall through */
+	case ATA_DEV_ATA:
 		if (err & ATA_ICRC)
 			qc->err_mask |= AC_ERR_ATA_BUS;
 		if (err & (ATA_UNC | ATA_AMNF))
-- 
2.20.1


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20190715140341.6443-1-sashal@kernel.org>
2019-07-15 14:02 ` [PATCH AUTOSEL 5.1 150/219] libata: don't request sense data on !ZAC ATA devices Sasha Levin

Linux-ide Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-ide/0 linux-ide/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-ide linux-ide/ https://lore.kernel.org/linux-ide \
		linux-ide@vger.kernel.org linux-ide@archiver.kernel.org
	public-inbox-index linux-ide


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-ide


AGPL code for this site: git clone https://public-inbox.org/ public-inbox