[PATCH 6/8] sata_qstor: use dma_set_mask_and_coherent

[Christoph Hellwig <hch@lst.de>]

Use the dma_set_mask_and_coherent helper to set the DMA mask.  Rely
on the relatively recent change that setting a larger than required
mask will never fail to avoid the need for the boilerplate 32-bit
fallback code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/ata/sata_qstor.c | 34 +++++++---------------------------
 1 file changed, 7 insertions(+), 27 deletions(-)

diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 865e5c58bd94..c53c5a47204d 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -537,33 +537,13 @@ static void qs_host_init(struct ata_host *host, unsigned int chip_id)
 static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
 {
 	u32 bus_info = readl(mmio_base + QS_HID_HPHY);
-	int rc, have_64bit_bus = (bus_info & QS_HPHY_64BIT);
-
-	if (have_64bit_bus &&
-	    !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
-		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
-		if (rc) {
-			rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
-			if (rc) {
-				dev_err(&pdev->dev,
-					"64-bit DMA enable failed\n");
-				return rc;
-			}
-		}
-	} else {
-		rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
-		if (rc) {
-			dev_err(&pdev->dev, "32-bit DMA enable failed\n");
-			return rc;
-		}
-		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
-		if (rc) {
-			dev_err(&pdev->dev,
-				"32-bit consistent DMA enable failed\n");
-			return rc;
-		}
-	}
-	return 0;
+	int dma_bits = (bus_info & QS_HPHY_64BIT) ? 64 : 32;
+	int rc;
+
+	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(dma_bits));
+	if (rc)
+		dev_err(&pdev->dev, "%d-bit DMA enable failed\n", dma_bits);
+	return rc;
 }
 
 static int qs_ata_init_one(struct pci_dev *pdev,
-- 
2.20.1