Linux-ide Archive on lore.kernel.org
 help / color / Atom feed
From: Rob Herring <robh@kernel.org>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: devicetree@vger.kernel.org, Jens Axboe <axboe@kernel.dk>,
	linux-ide@vger.kernel.org,
	Linus Walleij <linus.walleij@linaro.org>
Subject: Re: [PATCH 1/2 v3] dt-bindings: Create DT bindings for PATA controllers
Date: Mon, 13 Jan 2020 17:02:07 -0600
Message-ID: <20200113230207.GA31662@bogus> (raw)
In-Reply-To: <20200110081411.9806-1-linus.walleij@linaro.org>

On Fri, 10 Jan 2020 09:14:10 +0100, Linus Walleij wrote:
> I need to create subnodes for drives connected to PATA
> host controllers, and this needs to be supported generally,
> so create a common YAML binding for "ide" that will support
> subnodes with ports.
> 
> This has been designed as a subset of
> ata/ahci-platform.txt with the bare essentials and
> should be possible to extend or superset to cover the
> common bindings.
> 
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ChangeLog v2->v3:
> - Only support PATA controllers for now since it is all I
>   need right now. SATA controller have complex topology and
>   might need more elaborate subnodes, possibly a subnode for
>   the multiplier itself, so I will split that off into its
>   own RFC patch.
> ChangeLog v1->v2:
> - Use ide@ and sata@ as node names.
> - Use ide-port@ and sata-port@ for the ports toward the
>   drives, rather than letting the subnodes be the drives
>   themselves.
> ---
>  .../devicetree/bindings/ata/pata-common.yaml  | 50 +++++++++++++++++++
>  1 file changed, 50 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/ata/pata-common.yaml
> 

Applied, thanks.

Rob

      parent reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-10  8:14 Linus Walleij
2020-01-10  8:14 ` [PATCH 2/2 v3] dt-bindings: Convert Faraday FTIDE010 to DT schema Linus Walleij
2020-01-13 23:02   ` Rob Herring
2020-01-13 23:02 ` Rob Herring [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200113230207.GA31662@bogus \
    --to=robh@kernel.org \
    --cc=axboe@kernel.dk \
    --cc=devicetree@vger.kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ide Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-ide/0 linux-ide/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-ide linux-ide/ https://lore.kernel.org/linux-ide \
		linux-ide@vger.kernel.org
	public-inbox-index linux-ide

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-ide


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git