* [PATCH] libata: Use per port sync for detach
@ 2020-05-15 11:09 Kai-Heng Feng
2020-05-15 12:38 ` John Garry
0 siblings, 1 reply; 6+ messages in thread
From: Kai-Heng Feng @ 2020-05-15 11:09 UTC (permalink / raw)
To: axboe
Cc: Kai-Heng Feng, John Garry,
open list:LIBATA SUBSYSTEM (Serial and Parallel ATA drivers),
open list
Commit 130f4caf145c ("libata: Ensure ata_port probe has completed before
detach") may cause system freeze during suspend.
Using async_synchronize_full() in PM callbacks is wrong, since async
callbacks that are already scheduled may wait for not-yet-scheduled
callbacks, causes a circular dependency.
Instead of using big hammer like async_synchronize_full(), use async
cookie to make sure port probe are synced, without affecting other
scheduled PM callbacks.
Fixes: 130f4caf145c ("libata: Ensure ata_port probe has completed before detach")
BugLink: https://bugs.launchpad.net/bugs/1867983
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
drivers/ata/libata-core.c | 6 +++---
include/linux/libata.h | 3 +++
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index beca5f91bb4c..4a698f6388cd 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -42,7 +42,6 @@
#include <linux/workqueue.h>
#include <linux/scatterlist.h>
#include <linux/io.h>
-#include <linux/async.h>
#include <linux/log2.h>
#include <linux/slab.h>
#include <linux/glob.h>
@@ -5778,7 +5777,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
/* perform each probe asynchronously */
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
- async_schedule(async_port_probe, ap);
+ ap->cookie = async_schedule(async_port_probe, ap);
}
return 0;
@@ -5921,7 +5920,8 @@ void ata_host_detach(struct ata_host *host)
int i;
/* Ensure ata_port probe has completed */
- async_synchronize_full();
+ for (i = 0; i < host->n_ports; i++)
+ async_synchronize_cookie(host->ports[i]->cookie);
for (i = 0; i < host->n_ports; i++)
ata_port_detach(host->ports[i]);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index cffa4714bfa8..ae6dfc107ea8 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -22,6 +22,7 @@
#include <linux/acpi.h>
#include <linux/cdrom.h>
#include <linux/sched.h>
+#include <linux/async.h>
/*
* Define if arch has non-standard setup. This is a _PCI_ standard
@@ -872,6 +873,8 @@ struct ata_port {
struct timer_list fastdrain_timer;
unsigned long fastdrain_cnt;
+ async_cookie_t cookie;
+
int em_message_type;
void *private_data;
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH] libata: Use per port sync for detach 2020-05-15 11:09 [PATCH] libata: Use per port sync for detach Kai-Heng Feng @ 2020-05-15 12:38 ` John Garry 2020-05-15 17:48 ` Kai-Heng Feng 0 siblings, 1 reply; 6+ messages in thread From: John Garry @ 2020-05-15 12:38 UTC (permalink / raw) To: Kai-Heng Feng, axboe Cc: open list:LIBATA SUBSYSTEM (Serial and Parallel ATA drivers), open list On 15/05/2020 12:09, Kai-Heng Feng wrote: > Commit 130f4caf145c ("libata: Ensure ata_port probe has completed before > detach") may cause system freeze during suspend. > > Using async_synchronize_full() in PM callbacks is wrong, since async > callbacks that are already scheduled may wait for not-yet-scheduled > callbacks, causes a circular dependency. It would be nice to describe this circular dependency a bit more. > > Instead of using big hammer like async_synchronize_full(), use async > cookie to make sure port probe are synced, without affecting other > scheduled PM callbacks. oh, I thought that we could avoid the hassle of per-port cookie management. Sorry. Did you check if the original issue which I tried to remedy is still suppressed? I tried your patch, and got this: [ 28.190587] ------------[ cut here ]------------ [ 28.195194] WARNING: CPU: 79 PID: 1 at drivers/ata/libata-core.c:5888 ata_hos t_detach+0x238/0x248 [ 28.204025] Modules linked in: [ 28.207072] CPU: 79 PID: 1 Comm: swapper/0 Tainted: G W 5.7.0- rc5-g644cd6f-dirty #84 [ 28.216076] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V 3.B220.02 03/27/2020 [ 28.224906] pstate: 20c00009 (nzCv daif +PAN +UAO) [ 28.229677] pc : ata_host_detach+0x238/0x248 [ 28.233929] lr : ata_host_detach+0x12c/0x248 [ 28.238181] sp : ffff0026dc74f980 [ 28.241481] x29: ffff0026dc74f980 x28: 0000000000000000 [ 28.246769] x27: ffff2026c541c010 x26: 00000000000038e0 [ 28.252059] x25: 0000000000003590 x24: ffff0026d3a0a018 [ 28.257350] x23: 0000000000000001 x22: ffff0026d3a0a000 [ 28.262638] x21: 0000000000013ec0 x20: ffff2026c541c000 [ 28.267928] x19: ffff2026c541c020 x18: 0000000000000000 [ 28.273215] x17: 0000000000000000 x16: 0000000000000000 [ 28.278504] x15: 00000000000006c0 x14: 0000000000000000 [ 28.283792] x13: 0000000000000000 x12: 1fffe004da744317 [ 28.289081] x11: ffff8004da744317 x10: dfffa00000000000 [ 28.294370] x9 : ffff8004da744318 x8 : ffff0026d3a218bc [ 28.299657] x7 : 0000000000000001 x6 : ffff8004da744318 [ 28.304945] x5 : ffff8004da744318 x4 : dfffa00000000000 [ 28.310233] x3 : ffffa00075ea18b4 x2 : 0000000000000003 [ 28.315521] x1 : 0000000000000000 x0 : 0000000000400200 [ 28.320808] Call trace: [ 28.323246] ata_host_detach+0x238/0x248 [ 28.327153] ata_pci_remove_one+0x24/0x38 [ 28.331147] ahci_remove_one+0x54/0x88 [ 28.334881] pci_device_remove+0x70/0x148 [ 28.338874] really_probe+0x17c/0x570 [ 28.342522] driver_probe_device+0x80/0x150 [ 28.346690] device_driver_attach+0x9c/0xa8 [ 28.350856] __driver_attach+0xac/0x118 [ 28.354677] bus_for_each_dev+0xf0/0x168 [ 28.358584] driver_attach+0x34/0x48 [ 28.362146] bus_add_driver+0x240/0x300 [ 28.365966] driver_register+0xc0/0x1e0 [ 28.369787] __pci_register_driver+0xb4/0xd0 [ 28.374039] ahci_pci_driver_init+0x24/0x30 [ 28.378205] do_one_initcall+0xb8/0x268 [ 28.382027] kernel_init_freeable+0x294/0x30c [ 28.386366] kernel_init+0x14/0x120 [ 28.389841] ret_from_fork+0x10/0x1c [ 28.393400] ---[ end trace 9972785c7052048f ]--- [ 28.435826] ahci 0000:b4:03.0: SSS flag set, parallel bus scan disabled Thanks, John > > Fixes: 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") > BugLink: https://bugs.launchpad.net/bugs/1867983 > Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> > --- > drivers/ata/libata-core.c | 6 +++--- > include/linux/libata.h | 3 +++ > 2 files changed, 6 insertions(+), 3 deletions(-) > > diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c > index beca5f91bb4c..4a698f6388cd 100644 > --- a/drivers/ata/libata-core.c > +++ b/drivers/ata/libata-core.c > @@ -42,7 +42,6 @@ > #include <linux/workqueue.h> > #include <linux/scatterlist.h> > #include <linux/io.h> > -#include <linux/async.h> > #include <linux/log2.h> > #include <linux/slab.h> > #include <linux/glob.h> > @@ -5778,7 +5777,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) > /* perform each probe asynchronously */ > for (i = 0; i < host->n_ports; i++) { > struct ata_port *ap = host->ports[i]; > - async_schedule(async_port_probe, ap); > + ap->cookie = async_schedule(async_port_probe, ap); > } > > return 0; > @@ -5921,7 +5920,8 @@ void ata_host_detach(struct ata_host *host) > int i; > > /* Ensure ata_port probe has completed */ > - async_synchronize_full(); > + for (i = 0; i < host->n_ports; i++) > + async_synchronize_cookie(host->ports[i]->cookie); > > for (i = 0; i < host->n_ports; i++) Is it possible to combine these "for" loops? > ata_port_detach(host->ports[i]); > diff --git a/include/linux/libata.h b/include/linux/libata.h > index cffa4714bfa8..ae6dfc107ea8 100644 > --- a/include/linux/libata.h > +++ b/include/linux/libata.h > @@ -22,6 +22,7 @@ > #include <linux/acpi.h> > #include <linux/cdrom.h> > #include <linux/sched.h> > +#include <linux/async.h> > alphabetic? > /* > * Define if arch has non-standard setup. This is a _PCI_ standard > @@ -872,6 +873,8 @@ struct ata_port { > struct timer_list fastdrain_timer; > unsigned long fastdrain_cnt; > > + async_cookie_t cookie; > + > int em_message_type; > void *private_data; > > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] libata: Use per port sync for detach 2020-05-15 12:38 ` John Garry @ 2020-05-15 17:48 ` Kai-Heng Feng 2020-05-18 9:06 ` John Garry 0 siblings, 1 reply; 6+ messages in thread From: Kai-Heng Feng @ 2020-05-15 17:48 UTC (permalink / raw) To: John Garry Cc: Jens Axboe, open list:LIBATA SUBSYSTEM (Serial and Parallel ATA drivers), open list > On May 15, 2020, at 20:38, John Garry <john.garry@huawei.com> wrote: > > On 15/05/2020 12:09, Kai-Heng Feng wrote: >> Commit 130f4caf145c ("libata: Ensure ata_port probe has completed before >> detach") may cause system freeze during suspend. >> Using async_synchronize_full() in PM callbacks is wrong, since async >> callbacks that are already scheduled may wait for not-yet-scheduled >> callbacks, causes a circular dependency. > > It would be nice to describe this circular dependency a bit more. Hmm, I think it's quite self-explanatory. Which part do you want me to add? > >> Instead of using big hammer like async_synchronize_full(), use async >> cookie to make sure port probe are synced, without affecting other >> scheduled PM callbacks. > > oh, I thought that we could avoid the hassle of per-port cookie management. Sorry. > > Did you check if the original issue which I tried to remedy is still suppressed? > > I tried your patch, and got this: > > [ 28.190587] ------------[ cut here ]------------ > [ 28.195194] WARNING: CPU: 79 PID: 1 at drivers/ata/libata-core.c:5888 ata_hos > t_detach+0x238/0x248 > [ 28.204025] Modules linked in: > [ 28.207072] CPU: 79 PID: 1 Comm: swapper/0 Tainted: G W 5.7.0- > rc5-g644cd6f-dirty #84 > [ 28.216076] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V > 3.B220.02 03/27/2020 > [ 28.224906] pstate: 20c00009 (nzCv daif +PAN +UAO) > [ 28.229677] pc : ata_host_detach+0x238/0x248 > [ 28.233929] lr : ata_host_detach+0x12c/0x248 > [ 28.238181] sp : ffff0026dc74f980 > [ 28.241481] x29: ffff0026dc74f980 x28: 0000000000000000 > [ 28.246769] x27: ffff2026c541c010 x26: 00000000000038e0 > [ 28.252059] x25: 0000000000003590 x24: ffff0026d3a0a018 > [ 28.257350] x23: 0000000000000001 x22: ffff0026d3a0a000 > [ 28.262638] x21: 0000000000013ec0 x20: ffff2026c541c000 > [ 28.267928] x19: ffff2026c541c020 x18: 0000000000000000 > [ 28.273215] x17: 0000000000000000 x16: 0000000000000000 > [ 28.278504] x15: 00000000000006c0 x14: 0000000000000000 > [ 28.283792] x13: 0000000000000000 x12: 1fffe004da744317 > [ 28.289081] x11: ffff8004da744317 x10: dfffa00000000000 > [ 28.294370] x9 : ffff8004da744318 x8 : ffff0026d3a218bc > [ 28.299657] x7 : 0000000000000001 x6 : ffff8004da744318 > [ 28.304945] x5 : ffff8004da744318 x4 : dfffa00000000000 > [ 28.310233] x3 : ffffa00075ea18b4 x2 : 0000000000000003 > [ 28.315521] x1 : 0000000000000000 x0 : 0000000000400200 > [ 28.320808] Call trace: > [ 28.323246] ata_host_detach+0x238/0x248 > [ 28.327153] ata_pci_remove_one+0x24/0x38 > [ 28.331147] ahci_remove_one+0x54/0x88 > [ 28.334881] pci_device_remove+0x70/0x148 > [ 28.338874] really_probe+0x17c/0x570 > [ 28.342522] driver_probe_device+0x80/0x150 > [ 28.346690] device_driver_attach+0x9c/0xa8 > [ 28.350856] __driver_attach+0xac/0x118 > [ 28.354677] bus_for_each_dev+0xf0/0x168 > [ 28.358584] driver_attach+0x34/0x48 > [ 28.362146] bus_add_driver+0x240/0x300 > [ 28.365966] driver_register+0xc0/0x1e0 > [ 28.369787] __pci_register_driver+0xb4/0xd0 > [ 28.374039] ahci_pci_driver_init+0x24/0x30 > [ 28.378205] do_one_initcall+0xb8/0x268 > [ 28.382027] kernel_init_freeable+0x294/0x30c > [ 28.386366] kernel_init+0x14/0x120 > [ 28.389841] ret_from_fork+0x10/0x1c > [ 28.393400] ---[ end trace 9972785c7052048f ]--- > [ 28.435826] ahci 0000:b4:03.0: SSS flag set, parallel bus scan disabled Can you please test the following patch: diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 474c6c34fe02..51ee0cc4d414 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -3583,8 +3583,10 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, rc = 0; /* if UNLOADING, finish immediately */ - if (ap->pflags & ATA_PFLAG_UNLOADING) + if (ap->pflags & ATA_PFLAG_UNLOADING) { + ap->pflags |= ATA_PFLAG_UNLOADED; goto out; + } It's only compile-tested, many drivers panic with CONFIG_DEBUG_TEST_DRIVER_REMOVE enabled, so the system I have can't even boot properly :( Probably worth some time to fix them one by one... Kai-Heng > > > Thanks, > John > >> Fixes: 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") >> BugLink: https://bugs.launchpad.net/bugs/1867983 >> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> >> --- >> drivers/ata/libata-core.c | 6 +++--- >> include/linux/libata.h | 3 +++ >> 2 files changed, 6 insertions(+), 3 deletions(-) >> diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c >> index beca5f91bb4c..4a698f6388cd 100644 >> --- a/drivers/ata/libata-core.c >> +++ b/drivers/ata/libata-core.c >> @@ -42,7 +42,6 @@ >> #include <linux/workqueue.h> >> #include <linux/scatterlist.h> >> #include <linux/io.h> >> -#include <linux/async.h> >> #include <linux/log2.h> >> #include <linux/slab.h> >> #include <linux/glob.h> >> @@ -5778,7 +5777,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) >> /* perform each probe asynchronously */ >> for (i = 0; i < host->n_ports; i++) { >> struct ata_port *ap = host->ports[i]; >> - async_schedule(async_port_probe, ap); >> + ap->cookie = async_schedule(async_port_probe, ap); >> } >> return 0; >> @@ -5921,7 +5920,8 @@ void ata_host_detach(struct ata_host *host) >> int i; >> /* Ensure ata_port probe has completed */ >> - async_synchronize_full(); >> + for (i = 0; i < host->n_ports; i++) >> + async_synchronize_cookie(host->ports[i]->cookie); >> for (i = 0; i < host->n_ports; i++) > > Is it possible to combine these "for" loops? > >> ata_port_detach(host->ports[i]); >> diff --git a/include/linux/libata.h b/include/linux/libata.h >> index cffa4714bfa8..ae6dfc107ea8 100644 >> --- a/include/linux/libata.h >> +++ b/include/linux/libata.h >> @@ -22,6 +22,7 @@ >> #include <linux/acpi.h> >> #include <linux/cdrom.h> >> #include <linux/sched.h> >> +#include <linux/async.h> >> > > alphabetic? > >> /* >> * Define if arch has non-standard setup. This is a _PCI_ standard >> @@ -872,6 +873,8 @@ struct ata_port { >> struct timer_list fastdrain_timer; >> unsigned long fastdrain_cnt; >> + async_cookie_t cookie; >> + >> int em_message_type; >> void *private_data; ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] libata: Use per port sync for detach 2020-05-15 17:48 ` Kai-Heng Feng @ 2020-05-18 9:06 ` John Garry 2020-05-18 15:21 ` John Garry 0 siblings, 1 reply; 6+ messages in thread From: John Garry @ 2020-05-18 9:06 UTC (permalink / raw) To: Kai-Heng Feng Cc: Jens Axboe, open list:LIBATA SUBSYSTEM (Serial and Parallel ATA drivers), open list On 15/05/2020 18:48, Kai-Heng Feng wrote: >> 841] ret_from_fork+0x10/0x1c >> [ 28.393400] ---[ end trace 9972785c7052048f ]--- >> [ 28.435826] ahci 0000:b4:03.0: SSS flag set, parallel bus scan disabled > Can you please test the following patch: > > diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c > index 474c6c34fe02..51ee0cc4d414 100644 > --- a/drivers/ata/libata-eh.c > +++ b/drivers/ata/libata-eh.c > @@ -3583,8 +3583,10 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, > rc = 0; > > /* if UNLOADING, finish immediately */ > - if (ap->pflags & ATA_PFLAG_UNLOADING) > + if (ap->pflags & ATA_PFLAG_UNLOADING) { > + ap->pflags |= ATA_PFLAG_UNLOADED; > goto out; > + } > > It's only compile-tested, many drivers panic with CONFIG_DEBUG_TEST_DRIVER_REMOVE enabled, so the system I have can't even boot properly:( ok, let me debug this today. Thanks, John ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] libata: Use per port sync for detach 2020-05-18 9:06 ` John Garry @ 2020-05-18 15:21 ` John Garry 2020-05-19 6:09 ` Kai-Heng Feng 0 siblings, 1 reply; 6+ messages in thread From: John Garry @ 2020-05-18 15:21 UTC (permalink / raw) To: Kai-Heng Feng Cc: Jens Axboe, open list:LIBATA SUBSYSTEM (Serial and Parallel ATA drivers), open list On 18/05/2020 10:06, John Garry wrote: > On 15/05/2020 18:48, Kai-Heng Feng wrote: >>> 841] ret_from_fork+0x10/0x1c >>> [ 28.393400] ---[ end trace 9972785c7052048f ]--- >>> [ 28.435826] ahci 0000:b4:03.0: SSS flag set, parallel bus scan >>> disabled >> Can you please test the following patch: >> >> diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c >> index 474c6c34fe02..51ee0cc4d414 100644 >> --- a/drivers/ata/libata-eh.c >> +++ b/drivers/ata/libata-eh.c >> @@ -3583,8 +3583,10 @@ int ata_eh_recover(struct ata_port *ap, >> ata_prereset_fn_t prereset, >> rc = 0; >> /* if UNLOADING, finish immediately */ >> - if (ap->pflags & ATA_PFLAG_UNLOADING) >> + if (ap->pflags & ATA_PFLAG_UNLOADING) { >> + ap->pflags |= ATA_PFLAG_UNLOADED; >> goto out; >> + } >> >> It's only compile-tested, many drivers panic with >> CONFIG_DEBUG_TEST_DRIVER_REMOVE enabled, so the system I have can't >> even boot properly:( > According to the comment for async_synchronize_cookie(), we sync upto (but excluding) the cookie: /** * async_synchronize_cookie - synchronize asynchronous function calls with cookie checkpointing * * This function waits until all asynchronous function calls prior to @cookie * have been done. So maybe it should be: + for (i = 0; i < host->n_ports; i++) + async_synchronize_cookie(host->ports[i]->cookie + 1); That is how other callsites use this API, and that change resolves the WARN for me. Thanks, John ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] libata: Use per port sync for detach 2020-05-18 15:21 ` John Garry @ 2020-05-19 6:09 ` Kai-Heng Feng 0 siblings, 0 replies; 6+ messages in thread From: Kai-Heng Feng @ 2020-05-19 6:09 UTC (permalink / raw) To: John Garry Cc: Jens Axboe, open list:LIBATA SUBSYSTEM (Serial and Parallel ATA drivers), open list Hi John, > On May 18, 2020, at 23:21, John Garry <john.garry@huawei.com> wrote: > > On 18/05/2020 10:06, John Garry wrote: >> On 15/05/2020 18:48, Kai-Heng Feng wrote: >>>> 841] ret_from_fork+0x10/0x1c >>>> [ 28.393400] ---[ end trace 9972785c7052048f ]--- >>>> [ 28.435826] ahci 0000:b4:03.0: SSS flag set, parallel bus scan disabled >>> Can you please test the following patch: >>> >>> diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c >>> index 474c6c34fe02..51ee0cc4d414 100644 >>> --- a/drivers/ata/libata-eh.c >>> +++ b/drivers/ata/libata-eh.c >>> @@ -3583,8 +3583,10 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, >>> rc = 0; >>> /* if UNLOADING, finish immediately */ >>> - if (ap->pflags & ATA_PFLAG_UNLOADING) >>> + if (ap->pflags & ATA_PFLAG_UNLOADING) { >>> + ap->pflags |= ATA_PFLAG_UNLOADED; >>> goto out; >>> + } >>> >>> It's only compile-tested, many drivers panic with CONFIG_DEBUG_TEST_DRIVER_REMOVE enabled, so the system I have can't even boot properly:( > > According to the comment for async_synchronize_cookie(), we sync upto (but excluding) the cookie: > > /** > * async_synchronize_cookie - synchronize asynchronous function calls with cookie checkpointing > * > * This function waits until all asynchronous function calls prior to @cookie > * have been done. > > So maybe it should be: > > + for (i = 0; i < host->n_ports; i++) > + async_synchronize_cookie(host->ports[i]->cookie + 1); > > That is how other callsites use this API, and that change resolves the WARN for me. Thanks for catching this up! Let me ask the user to test it, and I'll send v2 base on this. Kai-Heng > > Thanks, > John ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-05-19 6:09 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-05-15 11:09 [PATCH] libata: Use per port sync for detach Kai-Heng Feng 2020-05-15 12:38 ` John Garry 2020-05-15 17:48 ` Kai-Heng Feng 2020-05-18 9:06 ` John Garry 2020-05-18 15:21 ` John Garry 2020-05-19 6:09 ` Kai-Heng Feng
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).