Linux-ide Archive on lore.kernel.org
 help / color / Atom feed
From: Vaibhav Gupta <vaibhavgupta40@gmail.com>
To: Bjorn Helgaas <helgaas@kernel.org>,
	Bjorn Helgaas <bhelgaas@google.com>,
	bjorn@helgaas.com, Vaibhav Gupta <vaibhav.varodek@gmail.com>,
	"David S. Miller" <davem@davemloft.net>
Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com>,
	linux-kernel@vger.kernel.org,
	linux-kernel-mentees@lists.linuxfoundation.org,
	skhan@linuxfoundation.org, linux-ide@vger.kernel.org
Subject: [PATCH v1 3/4] ide: sc1200: use generic power management
Date: Wed, 24 Jun 2020 22:58:56 +0530
Message-ID: <20200624172857.60915-4-vaibhavgupta40@gmail.com> (raw)
In-Reply-To: <20200624172857.60915-1-vaibhavgupta40@gmail.com>

With the support of generic PM callbacks, drivers no longer need to use
legacy .suspend() and .resume() in which they had to maintain PCI states
changes and device's power state themselves. The required operations are
done by PCI core.

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
---
 drivers/ide/sc1200.c | 43 ++++++++++++++-----------------------------
 1 file changed, 14 insertions(+), 29 deletions(-)

diff --git a/drivers/ide/sc1200.c b/drivers/ide/sc1200.c
index a5b701818405..91a197832d1f 100644
--- a/drivers/ide/sc1200.c
+++ b/drivers/ide/sc1200.c
@@ -222,46 +222,33 @@ static void sc1200_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 	sc1200_tunepio(drive, pio);
 }
 
-#ifdef CONFIG_PM
 struct sc1200_saved_state {
 	u32 regs[8];
 };
 
-static int sc1200_suspend (struct pci_dev *dev, pm_message_t state)
+static int __maybe_unused sc1200_suspend(struct device *dev_d)
 {
-	printk("SC1200: suspend(%u)\n", state.event);
+	struct pci_dev *dev = to_pci_dev(dev_d);
+	struct ide_host *host = pci_get_drvdata(dev);
+	struct sc1200_saved_state *ss = host->host_priv;
+	unsigned int r;
 
 	/*
-	 * we only save state when going from full power to less
+	 * save timing registers
+	 * (this may be unnecessary if BIOS also does it)
 	 */
-	if (state.event == PM_EVENT_ON) {
-		struct ide_host *host = pci_get_drvdata(dev);
-		struct sc1200_saved_state *ss = host->host_priv;
-		unsigned int r;
-
-		/*
-		 * save timing registers
-		 * (this may be unnecessary if BIOS also does it)
-		 */
-		for (r = 0; r < 8; r++)
-			pci_read_config_dword(dev, 0x40 + r * 4, &ss->regs[r]);
-	}
+	for (r = 0; r < 8; r++)
+		pci_read_config_dword(dev, 0x40 + r * 4, &ss->regs[r]);
 
-	pci_disable_device(dev);
-	pci_set_power_state(dev, pci_choose_state(dev, state));
 	return 0;
 }
 
-static int sc1200_resume (struct pci_dev *dev)
+static int __maybe_unused sc1200_resume(struct device *dev_d)
 {
+	struct pci_dev *dev = to_pci_dev(dev_d);
 	struct ide_host *host = pci_get_drvdata(dev);
 	struct sc1200_saved_state *ss = host->host_priv;
 	unsigned int r;
-	int i;
-
-	i = pci_enable_device(dev);
-	if (i)
-		return i;
 
 	/*
 	 * restore timing registers
@@ -272,7 +259,6 @@ static int sc1200_resume (struct pci_dev *dev)
 
 	return 0;
 }
-#endif
 
 static const struct ide_port_ops sc1200_port_ops = {
 	.set_pio_mode		= sc1200_set_pio_mode,
@@ -326,15 +312,14 @@ static const struct pci_device_id sc1200_pci_tbl[] = {
 };
 MODULE_DEVICE_TABLE(pci, sc1200_pci_tbl);
 
+static SIMPLE_DEV_PM_OPS(sc1200_pm_ops, sc1200_suspend, sc1200_resume);
+
 static struct pci_driver sc1200_pci_driver = {
 	.name		= "SC1200_IDE",
 	.id_table	= sc1200_pci_tbl,
 	.probe		= sc1200_init_one,
 	.remove		= ide_pci_remove,
-#ifdef CONFIG_PM
-	.suspend	= sc1200_suspend,
-	.resume		= sc1200_resume,
-#endif
+	.driver.pm	= &sc1200_pm_ops,
 };
 
 static int __init sc1200_ide_init(void)
-- 
2.27.0


  parent reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-24 17:28 [PATCH v1 0/4] drivers: ide: " Vaibhav Gupta
2020-06-24 17:28 ` [PATCH v1 1/4] " Vaibhav Gupta
2020-06-24 22:14   ` kernel test robot
2020-06-26 15:35     ` Bjorn Helgaas
2020-06-29 13:53       ` [kbuild-all] " Xia, Hui
2020-06-24 17:28 ` [PATCH v1 2/4] ide: triflex: " Vaibhav Gupta
2020-06-24 17:28 ` Vaibhav Gupta [this message]
2020-06-24 17:28 ` [PATCH v1 4/4] ide: delkin_cb: " Vaibhav Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200624172857.60915-4-vaibhavgupta40@gmail.com \
    --to=vaibhavgupta40@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=bjorn@helgaas.com \
    --cc=davem@davemloft.net \
    --cc=helgaas@kernel.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel-mentees@lists.linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=skhan@linuxfoundation.org \
    --cc=vaibhav.varodek@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ide Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-ide/0 linux-ide/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-ide linux-ide/ https://lore.kernel.org/linux-ide \
		linux-ide@vger.kernel.org
	public-inbox-index linux-ide

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-ide


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git