Linux-ide Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/4] drivers: ide: use generic power management
@ 2020-07-03  8:14 Vaibhav Gupta
  2020-07-03  8:14 ` [PATCH v2 1/4] " Vaibhav Gupta
                   ` (3 more replies)
  0 siblings, 4 replies; 7+ messages in thread
From: Vaibhav Gupta @ 2020-07-03  8:14 UTC (permalink / raw)
  To: Bjorn Helgaas, Bjorn Helgaas, bjorn, Vaibhav Gupta, David S. Miller
  Cc: Vaibhav Gupta, linux-kernel, linux-kernel-mentees, skhan, linux-ide

Linux Kernel Mentee: Remove Legacy Power Management.

The purpose of this patch series is to remove legacy power management callbacks
from ide drivers.

The suspend() and resume() callbacks operations are still invoking
pci_save/restore_state(), pci_set_power_state(), pci_enable/disable_state(),
etc. and handling the power management themselves, which is not recommended.

The conversion requires the removal of the those function calls and change the
callback definition accordingly and make use of dev_pm_ops structure.

All patches are compile-tested only.

V2: Kbuild had modpost error for undefined reference in v1.

Testing by:
  Compiler: gcc (GCC) 10.1.0
  Build: make -j$(nproc) W=1 all

Vaibhav Gupta (4):
  ide: use generic power management
  ide: triflex: use generic power management
  ide: sc1200: use generic power management
  ide: delkin_cb: use generic power management

 drivers/ide/aec62xx.c         |  3 +--
 drivers/ide/alim15x3.c        |  3 +--
 drivers/ide/amd74xx.c         |  3 +--
 drivers/ide/atiixp.c          |  3 +--
 drivers/ide/cmd64x.c          |  3 +--
 drivers/ide/cs5520.c          |  3 +--
 drivers/ide/cs5530.c          |  3 +--
 drivers/ide/cs5535.c          |  3 +--
 drivers/ide/cs5536.c          |  3 +--
 drivers/ide/cy82c693.c        |  3 +--
 drivers/ide/delkin_cb.c       | 30 +++++-------------------
 drivers/ide/hpt366.c          |  3 +--
 drivers/ide/ide-pci-generic.c |  3 +--
 drivers/ide/it8172.c          |  3 +--
 drivers/ide/it8213.c          |  3 +--
 drivers/ide/it821x.c          |  3 +--
 drivers/ide/jmicron.c         |  3 +--
 drivers/ide/ns87415.c         |  3 +--
 drivers/ide/opti621.c         |  3 +--
 drivers/ide/pdc202xx_new.c    |  3 +--
 drivers/ide/pdc202xx_old.c    |  3 +--
 drivers/ide/piix.c            |  3 +--
 drivers/ide/sc1200.c          | 43 ++++++++++++-----------------------
 drivers/ide/serverworks.c     |  3 +--
 drivers/ide/setup-pci.c       | 29 +++++------------------
 drivers/ide/siimage.c         |  3 +--
 drivers/ide/sis5513.c         |  3 +--
 drivers/ide/sl82c105.c        |  3 +--
 drivers/ide/slc90e66.c        |  3 +--
 drivers/ide/triflex.c         | 24 +++++++++----------
 drivers/ide/via82cxxx.c       |  3 +--
 include/linux/ide.h           |  8 +------
 32 files changed, 65 insertions(+), 150 deletions(-)

-- 
2.27.0


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 1/4] ide: use generic power management
  2020-07-03  8:14 [PATCH v2 0/4] drivers: ide: use generic power management Vaibhav Gupta
@ 2020-07-03  8:14 ` Vaibhav Gupta
  2020-07-03  8:14 ` [PATCH v2 2/4] ide: triflex: " Vaibhav Gupta
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 7+ messages in thread
From: Vaibhav Gupta @ 2020-07-03  8:14 UTC (permalink / raw)
  To: Bjorn Helgaas, Bjorn Helgaas, bjorn, Vaibhav Gupta, David S. Miller
  Cc: Vaibhav Gupta, linux-kernel, linux-kernel-mentees, skhan, linux-ide

Earlier, drivers had to manage the device's power states, and related
operations, themselves. With the generic approach, these are done by PCI
core.

The ide_pci_suspend() and ide_pci_resume(), declared in
include/linux/ide.h and defined in drivers/ide/setup-pci.c, were external
and were exported. Those were then used by other source files.

Now, as they have to bind with dev_pm_ops object, there is no need to
export them and they can be made static.

Declare an extern const dev_pm_ops object in include/linux/ide.h and define
it in drivers/ide/setup-pci.c with SIMPLE_DEV_PM_OPS macro, binding
suspend, and resume callbacks with it. This object can now be used by other
source files.

The following source files are binding same dev_pm_ops object in their PM:
    drivers/ide/aec62xx.c
    drivers/ide/alim15x3.c
    drivers/ide/amd74xx.c
    drivers/ide/atiixp.c
    drivers/ide/cmd64x.c
    drivers/ide/cs5520.c
    drivers/ide/cs5530.c
    drivers/ide/cs5535.c
    drivers/ide/cs5536.c
    drivers/ide/cy82c693.c
    drivers/ide/hpt366.c
    drivers/ide/ide-pci-generic.c
    drivers/ide/it8172.c
    drivers/ide/it8213.c
    drivers/ide/it821x.c
    drivers/ide/jmicron.c
    drivers/ide/ns87415.c
    drivers/ide/opti621.c
    drivers/ide/pdc202xx_new.c
    drivers/ide/pdc202xx_old.c
    drivers/ide/piix.c
    drivers/ide/serverworks.c
    drivers/ide/setup-pci.c
    drivers/ide/siimage.c
    drivers/ide/sis5513.c
    drivers/ide/sl82c105.c
    drivers/ide/slc90e66.c
    drivers/ide/via82cxxx.c
    include/linux/ide.h

The drivers/ide/triflex.c driver was also using ide_pci_resume() callback
but it had its own definition for .suspend() as it does not want to power
off the device during suspend. Hence, it was excluded from generic pm
upgrade and was provided a static triflex_ide_pci_resume() with definition
same as of ide_pci_resume() to prevent it from breaking. A PCI quirk is
needed while upgrading it for generic PM support.

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
---
 drivers/ide/aec62xx.c         |  3 +--
 drivers/ide/alim15x3.c        |  3 +--
 drivers/ide/amd74xx.c         |  3 +--
 drivers/ide/atiixp.c          |  3 +--
 drivers/ide/cmd64x.c          |  3 +--
 drivers/ide/cs5520.c          |  3 +--
 drivers/ide/cs5530.c          |  3 +--
 drivers/ide/cs5535.c          |  3 +--
 drivers/ide/cs5536.c          |  3 +--
 drivers/ide/cy82c693.c        |  3 +--
 drivers/ide/hpt366.c          |  3 +--
 drivers/ide/ide-pci-generic.c |  3 +--
 drivers/ide/it8172.c          |  3 +--
 drivers/ide/it8213.c          |  3 +--
 drivers/ide/it821x.c          |  3 +--
 drivers/ide/jmicron.c         |  3 +--
 drivers/ide/ns87415.c         |  3 +--
 drivers/ide/opti621.c         |  3 +--
 drivers/ide/pdc202xx_new.c    |  3 +--
 drivers/ide/pdc202xx_old.c    |  3 +--
 drivers/ide/piix.c            |  3 +--
 drivers/ide/serverworks.c     |  3 +--
 drivers/ide/setup-pci.c       | 29 ++++++-----------------------
 drivers/ide/siimage.c         |  3 +--
 drivers/ide/sis5513.c         |  3 +--
 drivers/ide/sl82c105.c        |  3 +--
 drivers/ide/slc90e66.c        |  3 +--
 drivers/ide/triflex.c         | 23 ++++++++++++++++++++++-
 drivers/ide/via82cxxx.c       |  3 +--
 include/linux/ide.h           |  8 +-------
 30 files changed, 56 insertions(+), 85 deletions(-)

diff --git a/drivers/ide/aec62xx.c b/drivers/ide/aec62xx.c
index 4c959ce41ba9..375c7b4946f1 100644
--- a/drivers/ide/aec62xx.c
+++ b/drivers/ide/aec62xx.c
@@ -309,8 +309,7 @@ static struct pci_driver aec62xx_pci_driver = {
 	.id_table	= aec62xx_pci_tbl,
 	.probe		= aec62xx_init_one,
 	.remove		= aec62xx_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init aec62xx_ide_init(void)
diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index 3265970aee34..a5043e048f91 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -580,8 +580,7 @@ static struct pci_driver alim15x3_pci_driver = {
 	.id_table	= alim15x3_pci_tbl,
 	.probe		= alim15x3_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init ali15x3_ide_init(void)
diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c
index 7340597a373e..a9eb64b3e480 100644
--- a/drivers/ide/amd74xx.c
+++ b/drivers/ide/amd74xx.c
@@ -321,8 +321,7 @@ static struct pci_driver amd74xx_pci_driver = {
 	.id_table	= amd74xx_pci_tbl,
 	.probe		= amd74xx_probe,
 	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init amd74xx_ide_init(void)
diff --git a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c
index e08b0aac08b9..0bc98d5abaf4 100644
--- a/drivers/ide/atiixp.c
+++ b/drivers/ide/atiixp.c
@@ -190,8 +190,7 @@ static struct pci_driver atiixp_pci_driver = {
 	.id_table	= atiixp_pci_tbl,
 	.probe		= atiixp_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init atiixp_ide_init(void)
diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c
index 943bf944bf72..480898a76133 100644
--- a/drivers/ide/cmd64x.c
+++ b/drivers/ide/cmd64x.c
@@ -430,8 +430,7 @@ static struct pci_driver cmd64x_pci_driver = {
 	.id_table	= cmd64x_pci_tbl,
 	.probe		= cmd64x_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init cmd64x_ide_init(void)
diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c
index 89a4ff100b7a..ba0a5bc03d76 100644
--- a/drivers/ide/cs5520.c
+++ b/drivers/ide/cs5520.c
@@ -152,8 +152,7 @@ static struct pci_driver cs5520_pci_driver = {
 	.name		= "Cyrix_IDE",
 	.id_table	= cs5520_pci_tbl,
 	.probe		= cs5520_init_one,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init cs5520_ide_init(void)
diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c
index 65371599b976..5bb46e7130c8 100644
--- a/drivers/ide/cs5530.c
+++ b/drivers/ide/cs5530.c
@@ -273,8 +273,7 @@ static struct pci_driver cs5530_pci_driver = {
 	.id_table	= cs5530_pci_tbl,
 	.probe		= cs5530_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init cs5530_ide_init(void)
diff --git a/drivers/ide/cs5535.c b/drivers/ide/cs5535.c
index 70fdbe3161f8..c5b79f84d274 100644
--- a/drivers/ide/cs5535.c
+++ b/drivers/ide/cs5535.c
@@ -194,8 +194,7 @@ static struct pci_driver cs5535_pci_driver = {
 	.id_table	= cs5535_pci_tbl,
 	.probe		= cs5535_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init cs5535_ide_init(void)
diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c
index 8b5ca145191b..827cc6843934 100644
--- a/drivers/ide/cs5536.c
+++ b/drivers/ide/cs5536.c
@@ -279,8 +279,7 @@ static struct pci_driver cs5536_pci_driver = {
 	.id_table	= cs5536_pci_tbl,
 	.probe		= cs5536_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 module_pci_driver(cs5536_pci_driver);
diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c
index bc01660ee8fd..511a870a352c 100644
--- a/drivers/ide/cy82c693.c
+++ b/drivers/ide/cy82c693.c
@@ -212,8 +212,7 @@ static struct pci_driver cy82c693_pci_driver = {
 	.id_table	= cy82c693_pci_tbl,
 	.probe		= cy82c693_init_one,
 	.remove		= cy82c693_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init cy82c693_ide_init(void)
diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index fd3b5da44619..ecf58153ac8d 100644
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -1523,8 +1523,7 @@ static struct pci_driver hpt366_pci_driver = {
 	.id_table	= hpt366_pci_tbl,
 	.probe		= hpt366_init_one,
 	.remove		= hpt366_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init hpt366_ide_init(void)
diff --git a/drivers/ide/ide-pci-generic.c b/drivers/ide/ide-pci-generic.c
index 673420db953f..cc677fbed6f1 100644
--- a/drivers/ide/ide-pci-generic.c
+++ b/drivers/ide/ide-pci-generic.c
@@ -181,8 +181,7 @@ static struct pci_driver generic_pci_driver = {
 	.id_table	= generic_pci_tbl,
 	.probe		= generic_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init generic_ide_init(void)
diff --git a/drivers/ide/it8172.c b/drivers/ide/it8172.c
index b6f674ab4fb7..d3b5147af7dd 100644
--- a/drivers/ide/it8172.c
+++ b/drivers/ide/it8172.c
@@ -143,8 +143,7 @@ static struct pci_driver it8172_pci_driver = {
 	.id_table	= it8172_pci_tbl,
 	.probe		= it8172_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init it8172_ide_init(void)
diff --git a/drivers/ide/it8213.c b/drivers/ide/it8213.c
index d0bf4430c437..56bc08ce5805 100644
--- a/drivers/ide/it8213.c
+++ b/drivers/ide/it8213.c
@@ -195,8 +195,7 @@ static struct pci_driver it8213_pci_driver = {
 	.id_table	= it8213_pci_tbl,
 	.probe		= it8213_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init it8213_ide_init(void)
diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c
index 36a64c8ea575..aad746007330 100644
--- a/drivers/ide/it821x.c
+++ b/drivers/ide/it821x.c
@@ -690,8 +690,7 @@ static struct pci_driver it821x_pci_driver = {
 	.id_table	= it821x_pci_tbl,
 	.probe		= it821x_init_one,
 	.remove		= it821x_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init it821x_ide_init(void)
diff --git a/drivers/ide/jmicron.c b/drivers/ide/jmicron.c
index ae6480dcbadf..0fff50e712a2 100644
--- a/drivers/ide/jmicron.c
+++ b/drivers/ide/jmicron.c
@@ -154,8 +154,7 @@ static struct pci_driver jmicron_pci_driver = {
 	.id_table	= jmicron_pci_tbl,
 	.probe		= jmicron_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init jmicron_ide_init(void)
diff --git a/drivers/ide/ns87415.c b/drivers/ide/ns87415.c
index 11a672aba6ee..25c99265e85b 100644
--- a/drivers/ide/ns87415.c
+++ b/drivers/ide/ns87415.c
@@ -328,8 +328,7 @@ static struct pci_driver ns87415_pci_driver = {
 	.id_table	= ns87415_pci_tbl,
 	.probe		= ns87415_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init ns87415_ide_init(void)
diff --git a/drivers/ide/opti621.c b/drivers/ide/opti621.c
index c374f82333c6..9fa84e709c43 100644
--- a/drivers/ide/opti621.c
+++ b/drivers/ide/opti621.c
@@ -157,8 +157,7 @@ static struct pci_driver opti621_pci_driver = {
 	.id_table	= opti621_pci_tbl,
 	.probe		= opti621_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init opti621_ide_init(void)
diff --git a/drivers/ide/pdc202xx_new.c b/drivers/ide/pdc202xx_new.c
index 4fcafb9121e0..7c276b8aeb5f 100644
--- a/drivers/ide/pdc202xx_new.c
+++ b/drivers/ide/pdc202xx_new.c
@@ -535,8 +535,7 @@ static struct pci_driver pdc202new_pci_driver = {
 	.id_table	= pdc202new_pci_tbl,
 	.probe		= pdc202new_init_one,
 	.remove		= pdc202new_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init pdc202new_ide_init(void)
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index 5248ac064e6e..a902028dd5d2 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -340,8 +340,7 @@ static struct pci_driver pdc202xx_pci_driver = {
 	.id_table	= pdc202xx_pci_tbl,
 	.probe		= pdc202xx_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init pdc202xx_ide_init(void)
diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c
index a671cead6ae7..2634768a4e66 100644
--- a/drivers/ide/piix.c
+++ b/drivers/ide/piix.c
@@ -453,8 +453,7 @@ static struct pci_driver piix_pci_driver = {
 	.id_table	= piix_pci_tbl,
 	.probe		= piix_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init piix_ide_init(void)
diff --git a/drivers/ide/serverworks.c b/drivers/ide/serverworks.c
index 458e72e034b0..cdc05b23e03b 100644
--- a/drivers/ide/serverworks.c
+++ b/drivers/ide/serverworks.c
@@ -434,8 +434,7 @@ static struct pci_driver svwks_pci_driver = {
 	.id_table	= svwks_pci_tbl,
 	.probe		= svwks_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init svwks_ide_init(void)
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index fdc8e813170c..1a8fb033e4b3 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -648,35 +648,18 @@ void ide_pci_remove(struct pci_dev *dev)
 }
 EXPORT_SYMBOL_GPL(ide_pci_remove);
 
-#ifdef CONFIG_PM
-int ide_pci_suspend(struct pci_dev *dev, pm_message_t state)
-{
-	pci_save_state(dev);
-	pci_disable_device(dev);
-	pci_set_power_state(dev, pci_choose_state(dev, state));
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ide_pci_suspend);
+#define ide_pci_suspend NULL
 
-int ide_pci_resume(struct pci_dev *dev)
+static int __maybe_unused ide_pci_resume(struct device *dev_d)
 {
+	struct pci_dev *dev = to_pci_dev(dev_d);
 	struct ide_host *host = pci_get_drvdata(dev);
-	int rc;
-
-	pci_set_power_state(dev, PCI_D0);
-
-	rc = pci_enable_device(dev);
-	if (rc)
-		return rc;
-
-	pci_restore_state(dev);
-	pci_set_master(dev);
 
 	if (host->init_chipset)
 		host->init_chipset(dev);
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(ide_pci_resume);
-#endif
+
+SIMPLE_DEV_PM_OPS(ide_pci_pm_ops, ide_pci_suspend, ide_pci_resume);
+EXPORT_SYMBOL_GPL(ide_pci_pm_ops);
diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c
index c4b20f350b84..198847488cc6 100644
--- a/drivers/ide/siimage.c
+++ b/drivers/ide/siimage.c
@@ -821,8 +821,7 @@ static struct pci_driver siimage_pci_driver = {
 	.id_table	= siimage_pci_tbl,
 	.probe		= siimage_init_one,
 	.remove		= siimage_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init siimage_ide_init(void)
diff --git a/drivers/ide/sis5513.c b/drivers/ide/sis5513.c
index 024bc7ba49ee..410eddd3629f 100644
--- a/drivers/ide/sis5513.c
+++ b/drivers/ide/sis5513.c
@@ -615,8 +615,7 @@ static struct pci_driver sis5513_pci_driver = {
 	.id_table	= sis5513_pci_tbl,
 	.probe		= sis5513_init_one,
 	.remove		= sis5513_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init sis5513_ide_init(void)
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index 5c24c420c438..4ad5c6bce2b7 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -346,8 +346,7 @@ static struct pci_driver sl82c105_pci_driver = {
 	.id_table	= sl82c105_pci_tbl,
 	.probe		= sl82c105_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init sl82c105_ide_init(void)
diff --git a/drivers/ide/slc90e66.c b/drivers/ide/slc90e66.c
index f521d5ebf916..cd47445fda1f 100644
--- a/drivers/ide/slc90e66.c
+++ b/drivers/ide/slc90e66.c
@@ -160,8 +160,7 @@ static struct pci_driver slc90e66_pci_driver = {
 	.id_table	= slc90e66_pci_tbl,
 	.probe		= slc90e66_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init slc90e66_ide_init(void)
diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c
index 16ddd0956832..1886bbfb9e5d 100644
--- a/drivers/ide/triflex.c
+++ b/drivers/ide/triflex.c
@@ -110,8 +110,29 @@ static int triflex_ide_pci_suspend(struct pci_dev *dev, pm_message_t state)
 	pci_save_state(dev);
 	return 0;
 }
+
+static int triflex_ide_pci_resume(struct pci_dev *dev)
+{
+	struct ide_host *host = pci_get_drvdata(dev);
+	int rc;
+
+	pci_set_power_state(dev, PCI_D0);
+
+	rc = pci_enable_device(dev);
+	if (rc)
+		return rc;
+
+	pci_restore_state(dev);
+	pci_set_master(dev);
+
+	if (host->init_chipset)
+		host->init_chipset(dev);
+
+	return 0;
+}
 #else
 #define triflex_ide_pci_suspend NULL
+#define triflex_ide_pci_resume NULL
 #endif
 
 static struct pci_driver triflex_pci_driver = {
@@ -120,7 +141,7 @@ static struct pci_driver triflex_pci_driver = {
 	.probe		= triflex_init_one,
 	.remove		= ide_pci_remove,
 	.suspend	= triflex_ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.resume		= triflex_ide_pci_resume,
 };
 
 static int __init triflex_ide_init(void)
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index 63a3aca506fc..166feaeed6e3 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -510,8 +510,7 @@ static struct pci_driver via_pci_driver = {
 	.id_table 	= via_pci_tbl,
 	.probe 		= via_init_one,
 	.remove		= via_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init via_ide_init(void)
diff --git a/include/linux/ide.h b/include/linux/ide.h
index a254841bd315..77b41103e12b 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1394,13 +1394,7 @@ int ide_pci_init_two(struct pci_dev *, struct pci_dev *,
 		     const struct ide_port_info *, void *);
 void ide_pci_remove(struct pci_dev *);
 
-#ifdef CONFIG_PM
-int ide_pci_suspend(struct pci_dev *, pm_message_t);
-int ide_pci_resume(struct pci_dev *);
-#else
-#define ide_pci_suspend NULL
-#define ide_pci_resume NULL
-#endif
+extern const struct dev_pm_ops ide_pci_pm_ops;
 
 void ide_map_sg(ide_drive_t *, struct ide_cmd *);
 void ide_init_sg_cmd(struct ide_cmd *, unsigned int);
-- 
2.27.0


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 2/4] ide: triflex: use generic power management
  2020-07-03  8:14 [PATCH v2 0/4] drivers: ide: use generic power management Vaibhav Gupta
  2020-07-03  8:14 ` [PATCH v2 1/4] " Vaibhav Gupta
@ 2020-07-03  8:14 ` Vaibhav Gupta
  2020-07-07 20:42   ` Bjorn Helgaas
  2020-07-03  8:14 ` [PATCH v2 3/4] ide: sc1200: " Vaibhav Gupta
  2020-07-03  8:14 ` [PATCH v2 4/4] ide: delkin_cb: " Vaibhav Gupta
  3 siblings, 1 reply; 7+ messages in thread
From: Vaibhav Gupta @ 2020-07-03  8:14 UTC (permalink / raw)
  To: Bjorn Helgaas, Bjorn Helgaas, bjorn, Vaibhav Gupta, David S. Miller
  Cc: Vaibhav Gupta, linux-kernel, linux-kernel-mentees, skhan, linux-ide

While upgrading ide_pci_suspend() and ide_pci_resume(), all other source
files, using same callbacks, were also updated except
drivers/ide/triflex.c. This is because the driver does not want to power
off the device during suspend. A quirk was required for the same.

This patch provides the fix. Another driver,
drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c, makes use of
a quirk for similar goal. Hence a similar quirk has been applied for
triflex.

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
---
 drivers/ide/triflex.c | 45 +++++++++++--------------------------------
 1 file changed, 11 insertions(+), 34 deletions(-)

diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c
index 1886bbfb9e5d..f707f11c296d 100644
--- a/drivers/ide/triflex.c
+++ b/drivers/ide/triflex.c
@@ -100,48 +100,25 @@ static const struct pci_device_id triflex_pci_tbl[] = {
 };
 MODULE_DEVICE_TABLE(pci, triflex_pci_tbl);
 
-#ifdef CONFIG_PM
-static int triflex_ide_pci_suspend(struct pci_dev *dev, pm_message_t state)
-{
-	/*
-	 * We must not disable or powerdown the device.
-	 * APM bios refuses to suspend if IDE is not accessible.
-	 */
-	pci_save_state(dev);
-	return 0;
-}
-
-static int triflex_ide_pci_resume(struct pci_dev *dev)
+/*
+ * We must not disable or powerdown the device.
+ * APM bios refuses to suspend if IDE is not accessible.
+ */
+static void triflex_pci_pm_cap_fixup(struct pci_dev *pdev)
 {
-	struct ide_host *host = pci_get_drvdata(dev);
-	int rc;
-
-	pci_set_power_state(dev, PCI_D0);
-
-	rc = pci_enable_device(dev);
-	if (rc)
-		return rc;
-
-	pci_restore_state(dev);
-	pci_set_master(dev);
-
-	if (host->init_chipset)
-		host->init_chipset(dev);
-
-	return 0;
+	dev_info(&pdev->dev, "Disable triflex to be turned off by PCI CORE\n");
+	pdev->pm_cap = 0;
 }
-#else
-#define triflex_ide_pci_suspend NULL
-#define triflex_ide_pci_resume NULL
-#endif
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_COMPAQ,
+			PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE,
+			triflex_pci_pm_cap_fixup);
 
 static struct pci_driver triflex_pci_driver = {
 	.name		= "TRIFLEX_IDE",
 	.id_table	= triflex_pci_tbl,
 	.probe		= triflex_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= triflex_ide_pci_suspend,
-	.resume		= triflex_ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init triflex_ide_init(void)
-- 
2.27.0


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 3/4] ide: sc1200: use generic power management
  2020-07-03  8:14 [PATCH v2 0/4] drivers: ide: use generic power management Vaibhav Gupta
  2020-07-03  8:14 ` [PATCH v2 1/4] " Vaibhav Gupta
  2020-07-03  8:14 ` [PATCH v2 2/4] ide: triflex: " Vaibhav Gupta
@ 2020-07-03  8:14 ` Vaibhav Gupta
  2020-07-03  8:14 ` [PATCH v2 4/4] ide: delkin_cb: " Vaibhav Gupta
  3 siblings, 0 replies; 7+ messages in thread
From: Vaibhav Gupta @ 2020-07-03  8:14 UTC (permalink / raw)
  To: Bjorn Helgaas, Bjorn Helgaas, bjorn, Vaibhav Gupta, David S. Miller
  Cc: Vaibhav Gupta, linux-kernel, linux-kernel-mentees, skhan, linux-ide

With the support of generic PM callbacks, drivers no longer need to use
legacy .suspend() and .resume() in which they had to maintain PCI states
changes and device's power state themselves. The required operations are
done by PCI core.

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
---
 drivers/ide/sc1200.c | 43 ++++++++++++++-----------------------------
 1 file changed, 14 insertions(+), 29 deletions(-)

diff --git a/drivers/ide/sc1200.c b/drivers/ide/sc1200.c
index a5b701818405..91a197832d1f 100644
--- a/drivers/ide/sc1200.c
+++ b/drivers/ide/sc1200.c
@@ -222,46 +222,33 @@ static void sc1200_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 	sc1200_tunepio(drive, pio);
 }
 
-#ifdef CONFIG_PM
 struct sc1200_saved_state {
 	u32 regs[8];
 };
 
-static int sc1200_suspend (struct pci_dev *dev, pm_message_t state)
+static int __maybe_unused sc1200_suspend(struct device *dev_d)
 {
-	printk("SC1200: suspend(%u)\n", state.event);
+	struct pci_dev *dev = to_pci_dev(dev_d);
+	struct ide_host *host = pci_get_drvdata(dev);
+	struct sc1200_saved_state *ss = host->host_priv;
+	unsigned int r;
 
 	/*
-	 * we only save state when going from full power to less
+	 * save timing registers
+	 * (this may be unnecessary if BIOS also does it)
 	 */
-	if (state.event == PM_EVENT_ON) {
-		struct ide_host *host = pci_get_drvdata(dev);
-		struct sc1200_saved_state *ss = host->host_priv;
-		unsigned int r;
-
-		/*
-		 * save timing registers
-		 * (this may be unnecessary if BIOS also does it)
-		 */
-		for (r = 0; r < 8; r++)
-			pci_read_config_dword(dev, 0x40 + r * 4, &ss->regs[r]);
-	}
+	for (r = 0; r < 8; r++)
+		pci_read_config_dword(dev, 0x40 + r * 4, &ss->regs[r]);
 
-	pci_disable_device(dev);
-	pci_set_power_state(dev, pci_choose_state(dev, state));
 	return 0;
 }
 
-static int sc1200_resume (struct pci_dev *dev)
+static int __maybe_unused sc1200_resume(struct device *dev_d)
 {
+	struct pci_dev *dev = to_pci_dev(dev_d);
 	struct ide_host *host = pci_get_drvdata(dev);
 	struct sc1200_saved_state *ss = host->host_priv;
 	unsigned int r;
-	int i;
-
-	i = pci_enable_device(dev);
-	if (i)
-		return i;
 
 	/*
 	 * restore timing registers
@@ -272,7 +259,6 @@ static int sc1200_resume (struct pci_dev *dev)
 
 	return 0;
 }
-#endif
 
 static const struct ide_port_ops sc1200_port_ops = {
 	.set_pio_mode		= sc1200_set_pio_mode,
@@ -326,15 +312,14 @@ static const struct pci_device_id sc1200_pci_tbl[] = {
 };
 MODULE_DEVICE_TABLE(pci, sc1200_pci_tbl);
 
+static SIMPLE_DEV_PM_OPS(sc1200_pm_ops, sc1200_suspend, sc1200_resume);
+
 static struct pci_driver sc1200_pci_driver = {
 	.name		= "SC1200_IDE",
 	.id_table	= sc1200_pci_tbl,
 	.probe		= sc1200_init_one,
 	.remove		= ide_pci_remove,
-#ifdef CONFIG_PM
-	.suspend	= sc1200_suspend,
-	.resume		= sc1200_resume,
-#endif
+	.driver.pm	= &sc1200_pm_ops,
 };
 
 static int __init sc1200_ide_init(void)
-- 
2.27.0


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 4/4] ide: delkin_cb: use generic power management
  2020-07-03  8:14 [PATCH v2 0/4] drivers: ide: use generic power management Vaibhav Gupta
                   ` (2 preceding siblings ...)
  2020-07-03  8:14 ` [PATCH v2 3/4] ide: sc1200: " Vaibhav Gupta
@ 2020-07-03  8:14 ` Vaibhav Gupta
  3 siblings, 0 replies; 7+ messages in thread
From: Vaibhav Gupta @ 2020-07-03  8:14 UTC (permalink / raw)
  To: Bjorn Helgaas, Bjorn Helgaas, bjorn, Vaibhav Gupta, David S. Miller
  Cc: Vaibhav Gupta, linux-kernel, linux-kernel-mentees, skhan, linux-ide

With the support of generic PM callbacks, drivers no longer need to use
legacy .suspend() and .resume() in which they had to maintain PCI states
changes and device's power state themselves. All required operations are
done by PCI core.

After converting it into generic model, suspend() became an empty function.
Hence, it is defined as NULL.

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
---
 drivers/ide/delkin_cb.c | 30 ++++++------------------------
 1 file changed, 6 insertions(+), 24 deletions(-)

diff --git a/drivers/ide/delkin_cb.c b/drivers/ide/delkin_cb.c
index 300daabaa575..a8a1af6aa1c1 100644
--- a/drivers/ide/delkin_cb.c
+++ b/drivers/ide/delkin_cb.c
@@ -123,28 +123,13 @@ delkin_cb_remove (struct pci_dev *dev)
 	pci_disable_device(dev);
 }
 
-#ifdef CONFIG_PM
-static int delkin_cb_suspend(struct pci_dev *dev, pm_message_t state)
-{
-	pci_save_state(dev);
-	pci_disable_device(dev);
-	pci_set_power_state(dev, pci_choose_state(dev, state));
-
-	return 0;
-}
+#define delkin_cb_suspend NULL
 
-static int delkin_cb_resume(struct pci_dev *dev)
+static int __maybe_unused delkin_cb_resume(struct device *dev_d)
 {
+	struct pci_dev *dev = to_pci_dev(dev_d);
 	struct ide_host *host = pci_get_drvdata(dev);
-	int rc;
 
-	pci_set_power_state(dev, PCI_D0);
-
-	rc = pci_enable_device(dev);
-	if (rc)
-		return rc;
-
-	pci_restore_state(dev);
 	pci_set_master(dev);
 
 	if (host->init_chipset)
@@ -152,10 +137,6 @@ static int delkin_cb_resume(struct pci_dev *dev)
 
 	return 0;
 }
-#else
-#define delkin_cb_suspend NULL
-#define delkin_cb_resume NULL
-#endif
 
 static struct pci_device_id delkin_cb_pci_tbl[] = {
 	{ 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
@@ -164,13 +145,14 @@ static struct pci_device_id delkin_cb_pci_tbl[] = {
 };
 MODULE_DEVICE_TABLE(pci, delkin_cb_pci_tbl);
 
+static SIMPLE_DEV_PM_OPS(delkin_cb_pm_ops, delkin_cb_suspend, delkin_cb_resume);
+
 static struct pci_driver delkin_cb_pci_driver = {
 	.name		= "Delkin-ASKA-Workbit Cardbus IDE",
 	.id_table	= delkin_cb_pci_tbl,
 	.probe		= delkin_cb_probe,
 	.remove		= delkin_cb_remove,
-	.suspend	= delkin_cb_suspend,
-	.resume		= delkin_cb_resume,
+	.driver.pm	= &delkin_cb_pm_ops,
 };
 
 module_pci_driver(delkin_cb_pci_driver);
-- 
2.27.0


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v2 2/4] ide: triflex: use generic power management
  2020-07-03  8:14 ` [PATCH v2 2/4] ide: triflex: " Vaibhav Gupta
@ 2020-07-07 20:42   ` Bjorn Helgaas
  0 siblings, 0 replies; 7+ messages in thread
From: Bjorn Helgaas @ 2020-07-07 20:42 UTC (permalink / raw)
  To: Vaibhav Gupta
  Cc: Bjorn Helgaas, bjorn, Vaibhav Gupta, David S. Miller,
	linux-kernel, linux-kernel-mentees, skhan, linux-ide

On Fri, Jul 03, 2020 at 01:44:26PM +0530, Vaibhav Gupta wrote:
> While upgrading ide_pci_suspend() and ide_pci_resume(), all other source
> files, using same callbacks, were also updated except
> drivers/ide/triflex.c. This is because the driver does not want to power
> off the device during suspend. A quirk was required for the same.
> 
> This patch provides the fix. Another driver,
> drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c, makes use of
> a quirk for similar goal. Hence a similar quirk has been applied for
> triflex.
> 
> Compile-tested only.
> 
> Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
> ---
>  drivers/ide/triflex.c | 45 +++++++++++--------------------------------
>  1 file changed, 11 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c
> index 1886bbfb9e5d..f707f11c296d 100644
> --- a/drivers/ide/triflex.c
> +++ b/drivers/ide/triflex.c
> @@ -100,48 +100,25 @@ static const struct pci_device_id triflex_pci_tbl[] = {
>  };
>  MODULE_DEVICE_TABLE(pci, triflex_pci_tbl);
>  
> -#ifdef CONFIG_PM
> -static int triflex_ide_pci_suspend(struct pci_dev *dev, pm_message_t state)
> -{
> -	/*
> -	 * We must not disable or powerdown the device.
> -	 * APM bios refuses to suspend if IDE is not accessible.
> -	 */
> -	pci_save_state(dev);
> -	return 0;
> -}
> -
> -static int triflex_ide_pci_resume(struct pci_dev *dev)
> +/*
> + * We must not disable or powerdown the device.
> + * APM bios refuses to suspend if IDE is not accessible.
> + */
> +static void triflex_pci_pm_cap_fixup(struct pci_dev *pdev)
>  {
> -	struct ide_host *host = pci_get_drvdata(dev);
> -	int rc;
> -
> -	pci_set_power_state(dev, PCI_D0);
> -
> -	rc = pci_enable_device(dev);
> -	if (rc)
> -		return rc;
> -
> -	pci_restore_state(dev);
> -	pci_set_master(dev);
> -
> -	if (host->init_chipset)
> -		host->init_chipset(dev);
> -
> -	return 0;
> +	dev_info(&pdev->dev, "Disable triflex to be turned off by PCI CORE\n");

I would change this message to "Disabling PCI power management" to be
more like existing messages:

  "PM disabled\n"
  "Disabling PCI power management to avoid bug\n"
  "Disabling PCI power management on camera ISP\n"

> +	pdev->pm_cap = 0;
>  }
> -#else
> -#define triflex_ide_pci_suspend NULL
> -#define triflex_ide_pci_resume NULL
> -#endif
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_COMPAQ,
> +			PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE,
> +			triflex_pci_pm_cap_fixup);

I don't think this needs to be a fixup.  This could be done in the
probe routine (triflex_init_one()).

Doing it as a fixup means the PCI core will check every PCI device
to see if it matches PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE, which is a
little extra useless overhead and quirks are a little bit magic
because it's not as obvious how they're called.

But since triflex_init_one() is called only for the devices we care
about, you can just do:

  static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
  {
        dev->pm_cap = 0;
	dev_info(...);
        return ide_pci_init_one(dev, &triflex_device, NULL);
  }

>  static struct pci_driver triflex_pci_driver = {
>  	.name		= "TRIFLEX_IDE",
>  	.id_table	= triflex_pci_tbl,
>  	.probe		= triflex_init_one,
>  	.remove		= ide_pci_remove,
> -	.suspend	= triflex_ide_pci_suspend,
> -	.resume		= triflex_ide_pci_resume,
> +	.driver.pm	= &ide_pci_pm_ops,
>  };
>  
>  static int __init triflex_ide_init(void)
> -- 
> 2.27.0
> 

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v2 2/4] ide: triflex: use generic power management
       [not found] <CAPBsFfCdJkXO-V16yO2eTeAwnQnKJZ49yaJepbsF2dNZjLZFhw@mail.gmail.com>
@ 2020-07-07 21:15 ` Bjorn Helgaas
  0 siblings, 0 replies; 7+ messages in thread
From: Bjorn Helgaas @ 2020-07-07 21:15 UTC (permalink / raw)
  To: Vaibhav Gupta
  Cc: Vaibhav Gupta, Bjorn Helgaas, bjorn, David S. Miller,
	linux-kernel, linux-kernel-mentees, skhan, linux-ide

On Wed, Jul 08, 2020 at 02:23:22AM +0530, Vaibhav Gupta wrote:
> On Wed, Jul 8, 2020, 2:12 AM Bjorn Helgaas <helgaas@kernel.org> wrote:
> > On Fri, Jul 03, 2020 at 01:44:26PM +0530, Vaibhav Gupta wrote:

> > > -static int triflex_ide_pci_resume(struct pci_dev *dev)
> > > +/*
> > > + * We must not disable or powerdown the device.
> > > + * APM bios refuses to suspend if IDE is not accessible.
> > > + */
> > > +static void triflex_pci_pm_cap_fixup(struct pci_dev *pdev)
> > >  {
> > > -     struct ide_host *host = pci_get_drvdata(dev);
> > > -     int rc;
> > > -
> > > -     pci_set_power_state(dev, PCI_D0);
> > > -
> > > -     rc = pci_enable_device(dev);
> > > -     if (rc)
> > > -             return rc;
> > > -
> > > -     pci_restore_state(dev);
> > > -     pci_set_master(dev);
> > > -
> > > -     if (host->init_chipset)
> > > -             host->init_chipset(dev);
> > > -
> > > -     return 0;
> > > +     dev_info(&pdev->dev, "Disable triflex to be turned off by PCI
> > CORE\n");
> >
> > I would change this message to "Disabling PCI power management" to be
> > more like existing messages:
> >
> >   "PM disabled\n"
> >   "Disabling PCI power management to avoid bug\n"
> >   "Disabling PCI power management on camera ISP\n"
> >
> > > +     pdev->pm_cap = 0;
> > >  }
> > > -#else
> > > -#define triflex_ide_pci_suspend NULL
> > > -#define triflex_ide_pci_resume NULL
> > > -#endif
> > > +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_COMPAQ,
> > > +                     PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE,
> > > +                     triflex_pci_pm_cap_fixup);
> >
> > I don't think this needs to be a fixup.  This could be done in the
> > probe routine (triflex_init_one()).
> >
> > Doing it as a fixup means the PCI core will check every PCI device
> > to see if it matches PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE, which is a
> > little extra useless overhead and quirks are a little bit magic
> > because it's not as obvious how they're called.
> >
> > But since triflex_init_one() is called only for the devices we care
> > about, you can just do:
> >
> >   static int triflex_init_one(struct pci_dev *dev, const struct
> > pci_device_id *id)
> >   {
> >         dev->pm_cap = 0;
> >         dev_info(...);
> >         return ide_pci_init_one(dev, &triflex_device, NULL);
> >   }
> >
> Seems a better approach. And in that case I won't need this extra patch
> just for triflex. I can put dev->pm_cap=0 change
> in [Patch 1/1] along with other ide drivers.

Hmm, I just noticed that there are actually *two* drivers (triflex.c
and pata_triflex.c) for this same device, and they both have this
comment about "APM BIOS refusing to suspend if IDE is not accessible"
and therefore preventing suspend of IDE.

At least, the comment seems to imply that calling pci_save_state() is
a way to prevent suspend of the device.  That seems like a strange way
to do it, but ...

Anyway, I wonder if a single quirk in drivers/pci/quirks.c would be
better.  A preliminary patch could add a quirk (keeping the comment)
and remove the pci_save_state() from both triflex_ide_pci_suspend()
and triflex_ata_pci_device_suspend().

Then you could proceed with these generic PM changes on top of that.

Maybe make the dev_info() mention that you're disabling PM to avoid an
APM BIOS suspend defect so users have a clue about why.

Bjorn

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, back to index

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-03  8:14 [PATCH v2 0/4] drivers: ide: use generic power management Vaibhav Gupta
2020-07-03  8:14 ` [PATCH v2 1/4] " Vaibhav Gupta
2020-07-03  8:14 ` [PATCH v2 2/4] ide: triflex: " Vaibhav Gupta
2020-07-07 20:42   ` Bjorn Helgaas
2020-07-03  8:14 ` [PATCH v2 3/4] ide: sc1200: " Vaibhav Gupta
2020-07-03  8:14 ` [PATCH v2 4/4] ide: delkin_cb: " Vaibhav Gupta
     [not found] <CAPBsFfCdJkXO-V16yO2eTeAwnQnKJZ49yaJepbsF2dNZjLZFhw@mail.gmail.com>
2020-07-07 21:15 ` [PATCH v2 2/4] ide: triflex: " Bjorn Helgaas

Linux-ide Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-ide/0 linux-ide/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-ide linux-ide/ https://lore.kernel.org/linux-ide \
		linux-ide@vger.kernel.org
	public-inbox-index linux-ide

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-ide


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git