Linux-ide Archive on lore.kernel.org
 help / color / Atom feed
From: "Saheed O. Bolarinwa" <refactormyself@gmail.com>
To: helgaas@kernel.org, Jens Axboe <axboe@kernel.dk>
Cc: "Saheed O. Bolarinwa" <refactormyself@gmail.com>,
	bjorn@helgaas.com, skhan@linuxfoundation.org,
	linux-kernel-mentees@lists.linuxfoundation.org,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-ide@vger.kernel.org
Subject: [RFC PATCH 01/17] ata: Drop uses of pci_read_config_*() return value
Date: Sat,  1 Aug 2020 13:24:30 +0200
Message-ID: <20200801112446.149549-2-refactormyself@gmail.com> (raw)
In-Reply-To: <20200801112446.149549-1-refactormyself@gmail.com>

The return value of pci_read_config_*() may not indicate a device error.
However, the value read by these functions is more likely to indicate
this kind of error. This presents two overlapping ways of reporting
errors and complicates error checking.

It is possible to move to one single way of checking for error if the
dependency on the return value of these functions is removed, then it
can later be made to return void.

Remove all uses of the return value of pci_read_config_*().
Check the actual value read for ~0. In this case, ~0 is an invalid value
thus it indicates some kind of error.

drivers/ata/pata_cs5536.c cs5536_read() :
None of the callers of cs5536_read() uses the return value. The obtained
value can be checked for validity to confirm success.

Change the return type of cs5536_read() to void.

Suggested-by: Bjorn Helgaas <bjorn@helgaas.com>
Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com>
---
 drivers/ata/pata_cs5536.c | 6 +++---
 drivers/ata/pata_rz1000.c | 3 ++-
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 760ac6e65216..c204215e239f 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -83,16 +83,16 @@ static const struct dmi_system_id udma_quirk_dmi_table[] = {
 	{ }
 };
 
-static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
+static void cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
 {
 	if (unlikely(use_msr)) {
 		u32 dummy __maybe_unused;
 
 		rdmsr(MSR_IDE_CFG + reg, *val, dummy);
-		return 0;
+		return;
 	}
 
-	return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
+	pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
 }
 
 static int cs5536_write(struct pci_dev *pdev, int reg, int val)
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 3722a67083fd..e0b3de376357 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -64,7 +64,8 @@ static int rz1000_fifo_disable(struct pci_dev *pdev)
 {
 	u16 reg;
 	/* Be exceptionally paranoid as we must be sure to apply the fix */
-	if (pci_read_config_word(pdev, 0x40, &reg) != 0)
+	pci_read_config_word(pdev, 0x40, &reg);
+	if (reg == (u16)~0)
 		return -1;
 	reg &= 0xDFFF;
 	if (pci_write_config_word(pdev, 0x40, reg) != 0)
-- 
2.18.4


  reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-01 11:24 [RFC PATCH 00/17] " Saheed O. Bolarinwa
2020-08-01 11:24 ` Saheed O. Bolarinwa [this message]
2020-08-01 11:24 ` [RFC PATCH 13/17] ide: " Saheed O. Bolarinwa
2020-08-01 12:56 ` [RFC PATCH 00/17] " Borislav Petkov
2020-08-02 14:53   ` Tom Rix
2020-08-02 17:28   ` Saheed Bolarinwa
2020-08-02 18:46     ` Borislav Petkov
2020-08-02 19:14       ` Bjorn Helgaas
2020-08-02 20:18         ` Borislav Petkov
2020-08-03  6:56         ` Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200801112446.149549-2-refactormyself@gmail.com \
    --to=refactormyself@gmail.com \
    --cc=axboe@kernel.dk \
    --cc=bjorn@helgaas.com \
    --cc=helgaas@kernel.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel-mentees@lists.linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=skhan@linuxfoundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ide Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-ide/0 linux-ide/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-ide linux-ide/ https://lore.kernel.org/linux-ide \
		linux-ide@vger.kernel.org
	public-inbox-index linux-ide

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-ide


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git