From: Linus Walleij <linus.walleij@linaro.org>
To: Jens Axboe <axboe@kernel.dk>, linux-ide@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
Imre Kaloz <kaloz@openwrt.org>,
Krzysztof Halasa <khalasa@piap.pl>,
Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH 2/5 v2] pata: ixp4xx: Use IS_ENABLED() to determine endianness
Date: Sat, 31 Jul 2021 23:35:52 +0200 [thread overview]
Message-ID: <20210731213555.2965356-2-linus.walleij@linaro.org> (raw)
In-Reply-To: <20210731213555.2965356-1-linus.walleij@linaro.org>
Instead of an ARM-specific ifdef, use the global CPU config
and if (IS_ENABLED()).
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- No changes
---
drivers/ata/pata_ixp4xx_cf.c | 45 ++++++++++++++++++------------------
1 file changed, 22 insertions(+), 23 deletions(-)
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 23f0f7cacd52..bc5029d6525d 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -107,29 +107,28 @@ static void ixp4xx_setup_port(struct ata_port *ap,
ata_sff_std_ports(ioaddr);
-#ifndef __ARMEB__
-
- /* adjust the addresses to handle the address swizzling of the
- * ixp4xx in little endian mode.
- */
-
- *(unsigned long *)&ioaddr->data_addr ^= 0x02;
- *(unsigned long *)&ioaddr->cmd_addr ^= 0x03;
- *(unsigned long *)&ioaddr->altstatus_addr ^= 0x03;
- *(unsigned long *)&ioaddr->ctl_addr ^= 0x03;
- *(unsigned long *)&ioaddr->error_addr ^= 0x03;
- *(unsigned long *)&ioaddr->feature_addr ^= 0x03;
- *(unsigned long *)&ioaddr->nsect_addr ^= 0x03;
- *(unsigned long *)&ioaddr->lbal_addr ^= 0x03;
- *(unsigned long *)&ioaddr->lbam_addr ^= 0x03;
- *(unsigned long *)&ioaddr->lbah_addr ^= 0x03;
- *(unsigned long *)&ioaddr->device_addr ^= 0x03;
- *(unsigned long *)&ioaddr->status_addr ^= 0x03;
- *(unsigned long *)&ioaddr->command_addr ^= 0x03;
-
- raw_cmd ^= 0x03;
- raw_ctl ^= 0x03;
-#endif
+ if (!IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) {
+ /* adjust the addresses to handle the address swizzling of the
+ * ixp4xx in little endian mode.
+ */
+
+ *(unsigned long *)&ioaddr->data_addr ^= 0x02;
+ *(unsigned long *)&ioaddr->cmd_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->altstatus_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->ctl_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->error_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->feature_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->nsect_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->lbal_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->lbam_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->lbah_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->device_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->status_addr ^= 0x03;
+ *(unsigned long *)&ioaddr->command_addr ^= 0x03;
+
+ raw_cmd ^= 0x03;
+ raw_ctl ^= 0x03;
+ }
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", raw_cmd, raw_ctl);
}
--
2.31.1
next prev parent reply other threads:[~2021-07-31 21:38 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-31 21:35 [PATCH 1/5 v2] pata: ixp4xx: Use local dev variable Linus Walleij
2021-07-31 21:35 ` Linus Walleij [this message]
2021-07-31 21:35 ` [PATCH 3/5 v2] pata: ixp4xx: Refer to cmd and ctl rather than csN Linus Walleij
2021-07-31 21:35 ` [PATCH 4/5 v2] pata: ixp4xx: Add DT bindings Linus Walleij
2021-08-02 13:39 ` Rob Herring
2021-08-02 16:30 ` Rob Herring
2021-07-31 21:35 ` [PATCH 5/5 v2] pata: ixp4xx: Rewrite to use device tree Linus Walleij
2021-08-04 12:40 ` [PATCH 1/5 v2] pata: ixp4xx: Use local dev variable Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210731213555.2965356-2-linus.walleij@linaro.org \
--to=linus.walleij@linaro.org \
--cc=axboe@kernel.dk \
--cc=kaloz@openwrt.org \
--cc=khalasa@piap.pl \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).