linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Damien Le Moal <damien.lemoal@wdc.com>
To: Jens Axboe <axboe@kernel.dk>,
	linux-block@vger.kernel.org, linux-ide@vger.kernel.org,
	"Martin K . Petersen" <martin.petersen@oracle.com>,
	linux-scsi@vger.kernel.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>,
	Sreekanth Reddy <sreekanth.reddy@broadcom.com>,
	Suganath Prabu Subramani  <suganath-prabu.subramani@broadcom.com>
Subject: [PATCH v4 09/10] libahci: Introduce ncq_prio_supported sysfs sttribute
Date: Sat,  7 Aug 2021 13:18:58 +0900	[thread overview]
Message-ID: <20210807041859.579409-10-damien.lemoal@wdc.com> (raw)
In-Reply-To: <20210807041859.579409-1-damien.lemoal@wdc.com>

Currently, the only way a user can determine if a SATA device supports
NCQ priority is to try to enable the use of this feature using the
ncq_prio_enable sysfs device attribute. If enabling the feature fails,
it is because the device does not support NCQ priority. Otherwise, the
feature is enabled and indicates that the device supports NCQ priority.

Improve this odd interface by introducing the read-only
ncq_prio_supported sysfs device attribute to indicate if a SATA device
supports NCQ priority. The value of this attribute reflects if the
device flag ATA_DFLAG_NCQ_PRIO is set or cleared.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
---
 drivers/ata/libahci.c     |  1 +
 drivers/ata/libata-sata.c | 24 ++++++++++++++++++++++++
 include/linux/libata.h    |  1 +
 3 files changed, 26 insertions(+)

diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index fec2e9754aed..5b3fa2cbe722 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -125,6 +125,7 @@ EXPORT_SYMBOL_GPL(ahci_shost_attrs);
 struct device_attribute *ahci_sdev_attrs[] = {
 	&dev_attr_sw_activity,
 	&dev_attr_unload_heads,
+	&dev_attr_ncq_prio_supported,
 	&dev_attr_ncq_prio_enable,
 	NULL
 };
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index dc397ebda089..5566fd4bb38f 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -834,6 +834,30 @@ DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR,
 	    ata_scsi_lpm_show, ata_scsi_lpm_store);
 EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy);
 
+static ssize_t ata_ncq_prio_supported_show(struct device *device,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(device);
+	struct ata_port *ap = ata_shost_to_port(sdev->host);
+	struct ata_device *dev;
+	bool ncq_prio_supported;
+	int rc = 0;
+
+	spin_lock_irq(ap->lock);
+	dev = ata_scsi_find_dev(ap, sdev);
+	if (!dev)
+		rc = -ENODEV;
+	else
+		ncq_prio_supported = dev->flags & ATA_DFLAG_NCQ_PRIO;
+	spin_unlock_irq(ap->lock);
+
+	return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_supported);
+}
+
+DEVICE_ATTR(ncq_prio_supported, S_IRUGO, ata_ncq_prio_supported_show, NULL);
+EXPORT_SYMBOL_GPL(dev_attr_ncq_prio_supported);
+
 static ssize_t ata_ncq_prio_enable_show(struct device *device,
 					struct device_attribute *attr,
 					char *buf)
diff --git a/include/linux/libata.h b/include/linux/libata.h
index b23f28cfc8e0..a2d1bae7900b 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -539,6 +539,7 @@ typedef void (*ata_postreset_fn_t)(struct ata_link *link, unsigned int *classes)
 extern struct device_attribute dev_attr_unload_heads;
 #ifdef CONFIG_SATA_HOST
 extern struct device_attribute dev_attr_link_power_management_policy;
+extern struct device_attribute dev_attr_ncq_prio_supported;
 extern struct device_attribute dev_attr_ncq_prio_enable;
 extern struct device_attribute dev_attr_em_message_type;
 extern struct device_attribute dev_attr_em_message;
-- 
2.31.1


  parent reply	other threads:[~2021-08-07  4:19 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-07  4:18 [PATCH v4 00/10] libata cleanups and improvements Damien Le Moal
2021-08-07  4:18 ` [PATCH v4 01/10] libata: fix ata_host_alloc_pinfo() Damien Le Moal
2021-08-09  6:09   ` Hannes Reinecke
2021-08-09  9:07     ` Damien Le Moal
2021-08-07  4:18 ` [PATCH v4 02/10] libata: fix ata_host_start() Damien Le Moal
2021-08-07  4:18 ` [PATCH v4 03/10] libata: fix sparse warning Damien Le Moal
2021-08-09  6:10   ` Hannes Reinecke
2021-08-07  4:18 ` [PATCH v4 04/10] libata: cleanup device sleep capability detection Damien Le Moal
2021-08-07  4:18 ` [PATCH v4 05/10] libata: cleanup ata_dev_configure() Damien Le Moal
2021-08-07  4:18 ` [PATCH v4 06/10] libata: cleanup NCQ priority handling Damien Le Moal
2021-08-07  4:18 ` [PATCH v4 07/10] libata: fix ata_read_log_page() warning Damien Le Moal
2021-08-07  4:18 ` [PATCH v4 08/10] libata: print feature list on device scan Damien Le Moal
2021-08-07  4:18 ` Damien Le Moal [this message]
2021-08-09  6:11   ` [PATCH v4 09/10] libahci: Introduce ncq_prio_supported sysfs sttribute Hannes Reinecke
2021-08-07  4:18 ` [PATCH v4 10/10] scsi: mpt3sas: Introduce sas_ncq_prio_supported " Damien Le Moal
2021-08-10  3:12   ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210807041859.579409-10-damien.lemoal@wdc.com \
    --to=damien.lemoal@wdc.com \
    --cc=axboe@kernel.dk \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=sathya.prakash@broadcom.com \
    --cc=sreekanth.reddy@broadcom.com \
    --cc=suganath-prabu.subramani@broadcom.com \
    --subject='Re: [PATCH v4 09/10] libahci: Introduce ncq_prio_supported sysfs sttribute' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).