[PATCH v2 00/14] PCI: brcmstb: enable PCIe for STB chips

[PATCH v2 00/14] PCI: brcmstb: enable PCIe for STB chips

[Jim Quinlan]

v2:
Commit: "device core: Add ability to handle multiple dma offsets"
  o Added helper func attach_dma_pfn_offset_map() in address.c (Chistoph)
  o Helpers funcs added to __phys_to_dma() & __dma_to_phys() (Christoph)
  o Added warning when multiple offsets are needed and !DMA_PFN_OFFSET_MAP
  o dev->dma_pfn_map => dev->dma_pfn_offset_map
  o s/frm/from/ for dma_pfn_offset_frm_{phys,dma}_addr() (Christoph)
  o In device.h: s/const void */const struct dma_pfn_offset_region */
  o removed 'unlikely' from unlikely(dev->dma_pfn_offset_map) since
    guarded by CONFIG_DMA_PFN_OFFSET_MAP (Christoph)
  o Since dev->dma_pfn_offset is copied in usb/core/{usb,message}.c, now
    dev->dma_pfn_offset_map is copied as well.
  o Merged two of the DMA commits into one (Christoph).

Commit "arm: dma-mapping: Invoke dma offset func if needed":
  o Use helper functions instead of #if CONFIG_DMA_PFN_OFFSET

Other commits' changes:
  o Removed need for carrying of_id var in priv (Nicolas)
  o Commit message rewordings (Bjorn)
  o Commit log messages filled to 75 chars (Bjorn)
  o devm_reset_control_get_shared())
    => devm_reset_control_get_optional_shared (Philipp)
  o Add call to reset_control_assert() in PCIe remove routines (Philipp)

v1:
This patchset expands the usefulness of the Broadcom Settop Box PCIe
controller by building upon the PCIe driver used currently by the
Raspbery Pi.  Other forms of this patchset were submitted by me years
ago and not accepted; the major sticking point was the code required
for the DMA remapping needed for the PCIe driver to work [1].

There have been many changes to the DMA and OF subsystems since that
time, making a cleaner and less intrusive patchset possible.  This
patchset implements a generalization of "dev->dma_pfn_offset", except
that instead of a single scalar offset it provides for multiple
offsets via a function which depends upon the "dma-ranges" property of
the PCIe host controller.  This is required for proper functionality
of the BrcmSTB PCIe controller and possibly some other devices.

[1] https://lore.kernel.org/linux-arm-kernel/1516058925-46522-5-git-send-email-jim2101024@gmail.com/

Jim Quinlan (14):
  PCI: brcmstb: PCIE_BRCMSTB depends on ARCH_BRCMSTB
  ata: ahci_brcm: Fix use of BCM7216 reset controller
  dt-bindings: PCI: Add bindings for more Brcmstb chips
  PCI: brcmstb: Add bcm7278 reigister info
  PCI: brcmstb: Add suspend and resume pm_ops
  PCI: brcmstb: Add bcm7278 PERST support
  PCI: brcmstb: Add control of rescal reset
  of: Include a dev param in of_dma_get_range()
  device core: Add ability to handle multiple dma offsets
  arm: dma-mapping: Invoke dma offset func if needed
  PCI: brcmstb: Set internal memory viewport sizes
  PCI: brcmstb: Accommodate MSI for older chips
  PCI: brcmstb: Set bus max burst size by chip type
  PCI: brcmstb: Add bcm7211, bcm7216, bcm7445, bcm7278 to match list

 .../bindings/pci/brcm,stb-pcie.yaml           |  40 +-
 arch/arm/include/asm/dma-mapping.h            |  13 +-
 drivers/ata/ahci_brcm.c                       |  14 +-
 drivers/of/address.c                          |  69 ++-
 drivers/of/device.c                           |   2 +-
 drivers/of/of_private.h                       |   8 +-
 drivers/pci/controller/Kconfig                |   3 +-
 drivers/pci/controller/pcie-brcmstb.c         | 408 +++++++++++++++---
 drivers/usb/core/message.c                    |   3 +
 drivers/usb/core/usb.c                        |   3 +
 include/linux/device.h                        |  10 +-
 include/linux/dma-direct.h                    |  10 +-
 include/linux/dma-mapping.h                   |  46 ++
 kernel/dma/Kconfig                            |  13 +
 14 files changed, 559 insertions(+), 83 deletions(-)

-- 
2.17.1

[PATCH v2 02/14] ata: ahci_brcm: Fix use of BCM7216 reset controller

[Jim Quinlan]

From: Jim Quinlan <jquinlan@broadcom.com>

A reset controller "rescal" is shared between the AHCI driver and the PCIe
driver for the BrcmSTB 7216 chip.  The code is modified to allow this
sharing and to deassert() properly.

Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
---
 drivers/ata/ahci_brcm.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 6853dbb4131d..c4ea555573dd 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -428,7 +428,6 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *of_id;
 	struct device *dev = &pdev->dev;
-	const char *reset_name = NULL;
 	struct brcm_ahci_priv *priv;
 	struct ahci_host_priv *hpriv;
 	struct resource *res;
@@ -452,11 +451,11 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 
 	/* Reset is optional depending on platform and named differently */
 	if (priv->version == BRCM_SATA_BCM7216)
-		reset_name = "rescal";
+		priv->rcdev = devm_reset_control_get_optional_shared(&pdev->dev,
+								     "rescal");
 	else
-		reset_name = "ahci";
-
-	priv->rcdev = devm_reset_control_get_optional(&pdev->dev, reset_name);
+		priv->rcdev = devm_reset_control_get_optional(&pdev->dev,
+							      "ahci");
 	if (IS_ERR(priv->rcdev))
 		return PTR_ERR(priv->rcdev);
 
@@ -479,10 +478,7 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 		break;
 	}
 
-	if (priv->version == BRCM_SATA_BCM7216)
-		ret = reset_control_reset(priv->rcdev);
-	else
-		ret = reset_control_deassert(priv->rcdev);
+	ret = reset_control_deassert(priv->rcdev);
 	if (ret)
 		return ret;
 
-- 
2.17.1

Re: [PATCH v2 02/14] ata: ahci_brcm: Fix use of BCM7216 reset controller

[Florian Fainelli]

On 5/26/2020 12:12 PM, Jim Quinlan wrote:
> From: Jim Quinlan <jquinlan@broadcom.com>
> 
> A reset controller "rescal" is shared between the AHCI driver and the PCIe
> driver for the BrcmSTB 7216 chip.  The code is modified to allow this
> sharing and to deassert() properly.
> 
> Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>

This patch is actually a bug fix and should have:

Fixes: 272ecd60a636 ("ata: ahci_brcm: BCM7216 reset is self de-asserting")
Fixes: c345ec6a50e9 ("ata: ahci_brcm: Support BCM7216 reset controller
name")

and it could probably be merged out of this patch series I believe.
-- 
Florian

Re: [PATCH v2 00/14] PCI: brcmstb: enable PCIe for STB chips

[Rob Herring]

On Tue, May 26, 2020 at 03:12:39PM -0400, Jim Quinlan wrote:
> v2:
> Commit: "device core: Add ability to handle multiple dma offsets"
>   o Added helper func attach_dma_pfn_offset_map() in address.c (Chistoph)
>   o Helpers funcs added to __phys_to_dma() & __dma_to_phys() (Christoph)
>   o Added warning when multiple offsets are needed and !DMA_PFN_OFFSET_MAP
>   o dev->dma_pfn_map => dev->dma_pfn_offset_map
>   o s/frm/from/ for dma_pfn_offset_frm_{phys,dma}_addr() (Christoph)
>   o In device.h: s/const void */const struct dma_pfn_offset_region */
>   o removed 'unlikely' from unlikely(dev->dma_pfn_offset_map) since
>     guarded by CONFIG_DMA_PFN_OFFSET_MAP (Christoph)
>   o Since dev->dma_pfn_offset is copied in usb/core/{usb,message}.c, now
>     dev->dma_pfn_offset_map is copied as well.
>   o Merged two of the DMA commits into one (Christoph).
> 
> Commit "arm: dma-mapping: Invoke dma offset func if needed":
>   o Use helper functions instead of #if CONFIG_DMA_PFN_OFFSET
> 
> Other commits' changes:
>   o Removed need for carrying of_id var in priv (Nicolas)
>   o Commit message rewordings (Bjorn)
>   o Commit log messages filled to 75 chars (Bjorn)
>   o devm_reset_control_get_shared())
>     => devm_reset_control_get_optional_shared (Philipp)
>   o Add call to reset_control_assert() in PCIe remove routines (Philipp)
> 
> v1:
> This patchset expands the usefulness of the Broadcom Settop Box PCIe
> controller by building upon the PCIe driver used currently by the
> Raspbery Pi.  Other forms of this patchset were submitted by me years
> ago and not accepted; the major sticking point was the code required
> for the DMA remapping needed for the PCIe driver to work [1].
> 
> There have been many changes to the DMA and OF subsystems since that
> time, making a cleaner and less intrusive patchset possible.  This
> patchset implements a generalization of "dev->dma_pfn_offset", except
> that instead of a single scalar offset it provides for multiple
> offsets via a function which depends upon the "dma-ranges" property of
> the PCIe host controller.  This is required for proper functionality
> of the BrcmSTB PCIe controller and possibly some other devices.

If you can enable the h/w support without the multiple offset support, 
then I'd split up this series. The latter part might take a bit more 
time.

Rob

Re: [PATCH v2 00/14] PCI: brcmstb: enable PCIe for STB chips

[Jim Quinlan]

On Fri, May 29, 2020 at 1:49 PM Rob Herring <robh@kernel.org> wrote:
>
> On Tue, May 26, 2020 at 03:12:39PM -0400, Jim Quinlan wrote:
> > v2:
> > Commit: "device core: Add ability to handle multiple dma offsets"
> >   o Added helper func attach_dma_pfn_offset_map() in address.c (Chistoph)
> >   o Helpers funcs added to __phys_to_dma() & __dma_to_phys() (Christoph)
> >   o Added warning when multiple offsets are needed and !DMA_PFN_OFFSET_MAP
> >   o dev->dma_pfn_map => dev->dma_pfn_offset_map
> >   o s/frm/from/ for dma_pfn_offset_frm_{phys,dma}_addr() (Christoph)
> >   o In device.h: s/const void */const struct dma_pfn_offset_region */
> >   o removed 'unlikely' from unlikely(dev->dma_pfn_offset_map) since
> >     guarded by CONFIG_DMA_PFN_OFFSET_MAP (Christoph)
> >   o Since dev->dma_pfn_offset is copied in usb/core/{usb,message}.c, now
> >     dev->dma_pfn_offset_map is copied as well.
> >   o Merged two of the DMA commits into one (Christoph).
> >
> > Commit "arm: dma-mapping: Invoke dma offset func if needed":
> >   o Use helper functions instead of #if CONFIG_DMA_PFN_OFFSET
> >
> > Other commits' changes:
> >   o Removed need for carrying of_id var in priv (Nicolas)
> >   o Commit message rewordings (Bjorn)
> >   o Commit log messages filled to 75 chars (Bjorn)
> >   o devm_reset_control_get_shared())
> >     => devm_reset_control_get_optional_shared (Philipp)
> >   o Add call to reset_control_assert() in PCIe remove routines (Philipp)
> >
> > v1:
> > This patchset expands the usefulness of the Broadcom Settop Box PCIe
> > controller by building upon the PCIe driver used currently by the
> > Raspbery Pi.  Other forms of this patchset were submitted by me years
> > ago and not accepted; the major sticking point was the code required
> > for the DMA remapping needed for the PCIe driver to work [1].
> >
> > There have been many changes to the DMA and OF subsystems since that
> > time, making a cleaner and less intrusive patchset possible.  This
> > patchset implements a generalization of "dev->dma_pfn_offset", except
> > that instead of a single scalar offset it provides for multiple
> > offsets via a function which depends upon the "dma-ranges" property of
> > the PCIe host controller.  This is required for proper functionality
> > of the BrcmSTB PCIe controller and possibly some other devices.
>
> If you can enable the h/w support without the multiple offset support,
> then I'd split up this series. The latter part might take a bit more
> time.
>
> Rob
Unfortunately, the STB PCIe  controller depends on the multiple PFN
offset functionality.
Thanks,
Jim