* SATA errors accessing hidden partitions
[not found] <AM6PR10MB33991CE19828429C676C0296A1C40@AM6PR10MB3399.EURPRD10.PROD.OUTLOOK.COM>
@ 2019-09-09 6:25 ` Jorge Fernandez Monteagudo
2019-09-10 5:53 ` Christoph Hellwig
0 siblings, 1 reply; 8+ messages in thread
From: Jorge Fernandez Monteagudo @ 2019-09-09 6:25 UTC (permalink / raw)
To: tj; +Cc: linux-ide
[-- Attachment #1: Type: text/plain, Size: 1321 bytes --]
Hi all,
I have a SSD disk from transcend with 6 partitions, where partitions 3, 4 and 5 are locked. This disk implements the OPAL specifications and transcend supplies some tools to hide/unhide a partition.
The problem I see is that connecting this disk, all partitions are enumerated and the SATA subsystem begin to show error messages. The outcome is a long delay before the disk is available and the SATA link configured
at the minimum 1.5 Gbps speed. If the partitions are unlocked and the system rebooted (without power off to avoid locking the partitions again) the enumerations runs as usual with no errors and link configured at maximum 6 Gbps speed.
The same disk on Windows or OSX is enumerated ok, without the long delay.
Work-around: Unhidding the partitions before running 'blkid' avoids the errors because the enumeration is done with all partitions visible.
System info:
Debian 10
Kernel 4.19.37
command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=d98acd28-3ec1-440a-bc55-446c9a59f63e ro quiet libata.allow_tpm=1
uname: Linux ws-deb10 4.19.0-5-amd64 #1 SMP Debian 4.19.37-5 (2019-06-19) x86_64 GNU/Linux
blkid from util-linux 2.33.1 (libblkid 2.33.1, 09-Jan-2019)
Is this behavior known? Any solution is possible to avoid the 'patching' the udev rule?
Thanks!
Jorge
[-- Attachment #2: config-4.19.0-5-amd64.tar.gz --]
[-- Type: application/gzip, Size: 77523 bytes --]
[-- Attachment #3: dmesg.txt --]
[-- Type: text/plain, Size: 90998 bytes --]
[ 0.000000] Linux version 4.19.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-7)) #1 SMP Debian 4.19.37-5 (2019-06-19)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=d98acd28-3ec1-440a-bc55-446c9a59f63e ro quiet libata.allow_tpm=1
[ 0.000000] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd4bbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd4bc000-0x00000000dd5bcfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dd5bd000-0x00000000dd6b8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd6b9000-0x00000000dda83fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dda84000-0x00000000ddd64fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ddd65000-0x00000000ddeeafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ddeeb000-0x00000000ddf01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ddf02000-0x00000000ddf2afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ddf2b000-0x00000000de41efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de41f000-0x00000000de98ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de990000-0x00000000deff8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000deff9000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc0000-0x00000000fedc0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedc8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000003feffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: Default string Default string/GCM-B610-CS, BIOS R1.00.E1 08/01/2017
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2095.974 MHz processor
[ 0.002399] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.002402] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.002411] last_pfn = 0x3ff000 max_arch_pfn = 0x400000000
[ 0.002416] MTRR default type: uncachable
[ 0.002417] MTRR fixed ranges enabled:
[ 0.002418] 00000-9FFFF write-back
[ 0.002419] A0000-BFFFF write-through
[ 0.002420] C0000-FFFFF write-protect
[ 0.002420] MTRR variable ranges enabled:
[ 0.002422] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.002423] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.002424] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.002425] 3 base 0000DF000000 mask FFFFFF000000 uncachable
[ 0.002426] 4 disabled
[ 0.002426] 5 disabled
[ 0.002427] 6 disabled
[ 0.002427] 7 disabled
[ 0.002428] TOM2: 000000041f000000 aka 16880M
[ 0.002794] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002933] e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved
[ 0.002942] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.007265] found SMP MP-table at [mem 0x000fcb60-0x000fcb6f]
[ 0.007524] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[ 0.007528] Using GB pages for direct mapping
[ 0.007531] BRK [0x1f201000, 0x1f201fff] PGTABLE
[ 0.007532] BRK [0x1f202000, 0x1f202fff] PGTABLE
[ 0.007533] BRK [0x1f203000, 0x1f203fff] PGTABLE
[ 0.007566] BRK [0x1f204000, 0x1f204fff] PGTABLE
[ 0.007568] BRK [0x1f205000, 0x1f205fff] PGTABLE
[ 0.007862] BRK [0x1f206000, 0x1f206fff] PGTABLE
[ 0.007941] BRK [0x1f207000, 0x1f207fff] PGTABLE
[ 0.007943] BRK [0x1f208000, 0x1f208fff] PGTABLE
[ 0.008084] BRK [0x1f209000, 0x1f209fff] PGTABLE
[ 0.008179] BRK [0x1f20a000, 0x1f20afff] PGTABLE
[ 0.008240] BRK [0x1f20b000, 0x1f20bfff] PGTABLE
[ 0.008312] RAMDISK: [mem 0x3278d000-0x353bdfff]
[ 0.008318] ACPI: Early table checksum verification disabled
[ 0.008447] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[ 0.008450] ACPI: XSDT 0x00000000DD73D098 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008456] ACPI: FACP 0x00000000DD746570 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.008461] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180810/tbfadt-624)
[ 0.008465] ACPI: DSDT 0x00000000DD73D1E8 009387 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.008468] ACPI: FACS 0x00000000DDA82C80 000040
[ 0.008470] ACPI: APIC 0x00000000DD746680 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.008473] ACPI: FPDT 0x00000000DD746700 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008476] ACPI: FIDT 0x00000000DD746748 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008478] ACPI: MCFG 0x00000000DD7467E8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.008480] ACPI: HPET 0x00000000DD746828 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.008482] ACPI: ASF! 0x00000000DD746860 0000D6 (v32 AMD SB700ASF 00000001 TFSM 000F4240)
[ 0.008485] ACPI: UEFI 0x00000000DD746938 000042 (v01 00000000 00000000)
[ 0.008487] ACPI: SSDT 0x00000000DD746980 000718 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.008490] ACPI: SSDT 0x00000000DD747098 00873A (v02 AMD AGESA 00000002 MSFT 04000000)
[ 0.008492] ACPI: CRAT 0x00000000DD74F7D8 0005A0 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.008495] ACPI: SSDT 0x00000000DD74FD78 00147F (v01 AMD CPMDFIGP 00000001 INTL 20120913)
[ 0.008497] ACPI: SSDT 0x00000000DD7511F8 000692 (v01 AMD CPMADPS4 00000001 INTL 20120913)
[ 0.008500] ACPI: SSDT 0x00000000DD751890 0015F0 (v01 AMD CPMCMN 00000001 INTL 20120913)
[ 0.008502] ACPI: EINJ 0x00000000DD752E80 000130 (v01 AMI AMI.EINJ 00000000 AMI. 00000000)
[ 0.008505] ACPI: ERST 0x00000000DD752FB0 000230 (v01 AMIER AMI.ERST 00000000 AMI. 00000000)
[ 0.008507] ACPI: BERT 0x00000000DD7531E0 000030 (v01 AMI AMI.BERT 00000000 AMI. 00000000)
[ 0.008509] ACPI: HEST 0x00000000DD753210 0000A8 (v01 AMI AMI.HEST 00000000 AMI. 00000000)
[ 0.008519] ACPI: Local APIC address 0xfee00000
[ 0.008628] No NUMA configuration found
[ 0.008629] Faking a node at [mem 0x0000000000000000-0x00000003feffffff]
[ 0.008634] NODE_DATA(0) allocated [mem 0x3feff9000-0x3feffdfff]
[ 0.008672] Zone ranges:
[ 0.008673] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008674] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.008676] Normal [mem 0x0000000100000000-0x00000003feffffff]
[ 0.008677] Device empty
[ 0.008677] Movable zone start for each node
[ 0.008678] Early memory node ranges
[ 0.008679] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.008679] node 0: [mem 0x0000000000100000-0x00000000dd4bbfff]
[ 0.008680] node 0: [mem 0x00000000dd5bd000-0x00000000dd6b8fff]
[ 0.008681] node 0: [mem 0x00000000ddd65000-0x00000000ddeeafff]
[ 0.008681] node 0: [mem 0x00000000ddf02000-0x00000000ddf2afff]
[ 0.008682] node 0: [mem 0x00000000de41f000-0x00000000de98ffff]
[ 0.008682] node 0: [mem 0x00000000deff9000-0x00000000deffffff]
[ 0.008683] node 0: [mem 0x0000000100000000-0x00000003feffffff]
[ 0.008686] Reserved but unavailable: 100 pages
[ 0.008687] Initmem setup node 0 [mem 0x0000000000001000-0x00000003feffffff]
[ 0.008689] On node 0 totalpages: 4050043
[ 0.008690] DMA zone: 64 pages used for memmap
[ 0.008690] DMA zone: 21 pages reserved
[ 0.008691] DMA zone: 3996 pages, LIFO batch:0
[ 0.008775] DMA32 zone: 14132 pages used for memmap
[ 0.008776] DMA32 zone: 904415 pages, LIFO batch:63
[ 0.027649] Normal zone: 49088 pages used for memmap
[ 0.027650] Normal zone: 3141632 pages, LIFO batch:63
[ 0.091642] ACPI: PM-Timer IO Port: 0x808
[ 0.091645] ACPI: Local APIC address 0xfee00000
[ 0.091651] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.091660] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.091663] IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
[ 0.091665] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.091667] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.091668] ACPI: IRQ0 used by override.
[ 0.091669] ACPI: IRQ9 used by override.
[ 0.091671] Using ACPI (MADT) for SMP configuration information
[ 0.091672] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.091677] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.091703] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.091705] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.091706] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.091706] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.091707] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.091708] PM: Registered nosave memory: [mem 0xdd4bc000-0xdd5bcfff]
[ 0.091709] PM: Registered nosave memory: [mem 0xdd6b9000-0xdda83fff]
[ 0.091710] PM: Registered nosave memory: [mem 0xdda84000-0xddd64fff]
[ 0.091711] PM: Registered nosave memory: [mem 0xddeeb000-0xddf01fff]
[ 0.091713] PM: Registered nosave memory: [mem 0xddf2b000-0xde41efff]
[ 0.091714] PM: Registered nosave memory: [mem 0xde990000-0xdeff8fff]
[ 0.091716] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[ 0.091716] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.091717] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.091717] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[ 0.091718] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.091718] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.091718] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.091719] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.091719] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.091720] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.091720] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.091721] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.091721] PM: Registered nosave memory: [mem 0xfed90000-0xfedbffff]
[ 0.091722] PM: Registered nosave memory: [mem 0xfedc0000-0xfedc0fff]
[ 0.091722] PM: Registered nosave memory: [mem 0xfedc1000-0xfedc1fff]
[ 0.091723] PM: Registered nosave memory: [mem 0xfedc2000-0xfedc8fff]
[ 0.091723] PM: Registered nosave memory: [mem 0xfedc9000-0xff7fffff]
[ 0.091724] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.091726] [mem 0xdf000000-0xf7ffffff] available for PCI devices
[ 0.091727] Booting paravirtualized kernel on bare hardware
[ 0.091730] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.203140] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
[ 0.203150] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.203762] percpu: Embedded 44 pages/cpu s143256 r8192 d28776 u524288
[ 0.203769] pcpu-alloc: s143256 r8192 d28776 u524288 alloc=1*2097152
[ 0.203770] pcpu-alloc: [0] 0 1 2 3
[ 0.203796] Built 1 zonelists, mobility grouping on. Total pages: 3986738
[ 0.203797] Policy zone: Normal
[ 0.203799] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=d98acd28-3ec1-440a-bc55-446c9a59f63e ro quiet libata.allow_tpm=1
[ 0.219804] Calgary: detecting Calgary via BIOS EBDA area
[ 0.219805] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.291123] Memory: 15809432K/16200172K available (10252K kernel code, 1243K rwdata, 3184K rodata, 1580K init, 2296K bss, 390740K reserved, 0K cma-reserved)
[ 0.291302] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.291312] ftrace: allocating 31827 entries in 125 pages
[ 0.306467] rcu: Hierarchical RCU implementation.
[ 0.306470] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.306471] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.309669] NR_IRQS: 33024, nr_irqs: 1000, preallocated irqs: 16
[ 0.309874] spurious 8259A interrupt: IRQ7.
[ 0.312246] Console: colour VGA+ 80x25
[ 0.312255] console [tty0] enabled
[ 0.312282] ACPI: Core revision 20180810
[ 0.312530] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.312543] hpet clockevent registered
[ 0.312549] APIC: Switch to symmetric I/O mode setup
[ 0.312958] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.332549] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e365567211, max_idle_ns: 440795264558 ns
[ 0.332564] Calibrating delay loop (skipped), value calculated using timer frequency.. 4191.94 BogoMIPS (lpj=8383896)
[ 0.332567] pid_max: default: 32768 minimum: 301
[ 0.332631] Security Framework initialized
[ 0.332632] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.332655] AppArmor: AppArmor initialized
[ 0.336882] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.339027] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.339116] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.339184] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.339471] mce: CPU supports 7 MCE banks
[ 0.339482] LVT offset 1 assigned for vector 0xf9
[ 0.339490] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.339490] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.339493] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.339493] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.339495] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.339689] Freeing SMP alternatives memory: 24K
[ 0.344551] smpboot: CPU0: AMD Embedded R-Series RX-421BD Radeon R7 (family: 0x15, model: 0x60, stepping: 0x1)
[ 0.344551] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.344551] ... version: 0
[ 0.344551] ... bit width: 48
[ 0.344551] ... generic registers: 6
[ 0.344551] ... value mask: 0000ffffffffffff
[ 0.344551] ... max period: 00007fffffffffff
[ 0.344551] ... fixed-purpose events: 0
[ 0.344551] ... event mask: 000000000000003f
[ 0.344551] rcu: Hierarchical SRCU implementation.
[ 0.344551] random: crng done (trusting CPU's manufacturer)
[ 0.344551] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.344551] smp: Bringing up secondary CPUs ...
[ 0.344551] x86: Booting SMP configuration:
[ 0.344551] .... node #0, CPUs: #1 #2 #3
[ 0.348555] smp: Brought up 1 node, 4 CPUs
[ 0.348557] smpboot: Max logical packages: 1
[ 0.348558] smpboot: Total of 4 processors activated (16767.79 BogoMIPS)
[ 0.350012] devtmpfs: initialized
[ 0.350012] x86/mm: Memory block size: 128MB
[ 0.350012] PM: Registering ACPI NVS region [mem 0xdd6b9000-0xdda83fff] (3977216 bytes)
[ 0.350012] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.350012] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.350012] pinctrl core: initialized pinctrl subsystem
[ 0.350012] NET: Registered protocol family 16
[ 0.350012] audit: initializing netlink subsys (disabled)
[ 0.350012] audit: type=2000 audit(1563779540.036:1): state=initialized audit_enabled=0 res=1
[ 0.350012] cpuidle: using governor ladder
[ 0.350012] cpuidle: using governor menu
[ 0.352593] ACPI: bus type PCI registered
[ 0.352596] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.352669] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.352672] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.352685] PCI: Using configuration type 1 for base access
[ 0.352931] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.352932] mtrr: probably your BIOS does not setup all CPUs.
[ 0.352932] mtrr: corrected configuration.
[ 0.353530] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.353530] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.353530] ACPI: Added _OSI(Module Device)
[ 0.353530] ACPI: Added _OSI(Processor Device)
[ 0.353530] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.353530] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.353530] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.353530] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.362826] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.369145] ACPI: Interpreter enabled
[ 0.369167] ACPI: (supports S0 S3 S4 S5)
[ 0.369169] ACPI: Using IOAPIC for interrupt routing
[ 0.369230] HEST: Table parsing has been initialized.
[ 0.369233] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.369529] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.371027] ACPI: Power Resource [P0SD] (off)
[ 0.371060] ACPI: Power Resource [P3SD] (off)
[ 0.371157] ACPI: Power Resource [P0U2] (off)
[ 0.371185] ACPI: Power Resource [P3U2] (off)
[ 0.371411] ACPI: Power Resource [P0U3] (off)
[ 0.371437] ACPI: Power Resource [P3U3] (off)
[ 0.371774] ACPI: Power Resource [P0ST] (on)
[ 0.371802] ACPI: Power Resource [P3ST] (on)
[ 0.371887] ACPI: Power Resource [P0SA] (off)
[ 0.371911] ACPI: Power Resource [P3SA] (off)
[ 0.377514] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.377761] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.377766] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.377886] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[ 0.377995] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.378009] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.378294] PCI host bridge to bus 0000:00
[ 0.378296] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.378297] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.378298] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.378299] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.378300] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.378301] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.378302] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfed3ffff window]
[ 0.378303] pci_bus 0000:00: root bus resource [mem 0xfedca000-0xffffffff window]
[ 0.378304] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.378312] pci 0000:00:00.0: [1022:1576] type 00 class 0x060000
[ 0.378420] pci 0000:00:01.0: [1002:9874] type 00 class 0x030000
[ 0.378437] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.378445] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.378450] pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
[ 0.378456] pci 0000:00:01.0: reg 0x24: [mem 0xff700000-0xff73ffff]
[ 0.378461] pci 0000:00:01.0: reg 0x30: [mem 0xff740000-0xff75ffff pref]
[ 0.378464] pci 0000:00:01.0: enabling Extended Tags
[ 0.378501] pci 0000:00:01.0: supports D1 D2
[ 0.378502] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.378586] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[ 0.378601] pci 0000:00:01.1: reg 0x10: [mem 0xff764000-0xff767fff 64bit]
[ 0.378624] pci 0000:00:01.1: enabling Extended Tags
[ 0.378653] pci 0000:00:01.1: supports D1 D2
[ 0.378713] pci 0000:00:02.0: [1022:157b] type 00 class 0x060000
[ 0.378797] pci 0000:00:02.5: [1022:157c] type 01 class 0x060400
[ 0.378832] pci 0000:00:02.5: enabling Extended Tags
[ 0.378873] pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
[ 0.378946] pci 0000:00:03.0: [1022:157b] type 00 class 0x060000
[ 0.379033] pci 0000:00:08.0: [1022:1578] type 00 class 0x108000
[ 0.379046] pci 0000:00:08.0: reg 0x10: [mem 0xf0800000-0xf081ffff 64bit pref]
[ 0.379050] pci 0000:00:08.0: reg 0x18: [mem 0xff500000-0xff5fffff]
[ 0.379055] pci 0000:00:08.0: reg 0x1c: [mem 0xff770000-0xff770fff]
[ 0.379062] pci 0000:00:08.0: reg 0x24: [mem 0xff76a000-0xff76bfff]
[ 0.379138] pci 0000:00:09.0: [1022:157d] type 00 class 0x060000
[ 0.379212] pci 0000:00:09.2: [1022:157a] type 00 class 0x040300
[ 0.379222] pci 0000:00:09.2: reg 0x10: [mem 0xff760000-0xff763fff]
[ 0.379258] pci 0000:00:09.2: PME# supported from D0 D3hot D3cold
[ 0.379337] pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330
[ 0.379364] pci 0000:00:10.0: reg 0x10: [mem 0xff768000-0xff769fff 64bit]
[ 0.379466] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.379547] pci 0000:00:11.0: [1022:7901] type 00 class 0x010601
[ 0.379565] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.379573] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.379581] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.379589] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.379597] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.379605] pci 0000:00:11.0: reg 0x24: [mem 0xff76e000-0xff76e3ff]
[ 0.379641] pci 0000:00:11.0: PME# supported from D3hot
[ 0.379707] pci 0000:00:12.0: [1022:7908] type 00 class 0x0c0320
[ 0.379726] pci 0000:00:12.0: reg 0x10: [mem 0xff76d000-0xff76d0ff]
[ 0.379797] pci 0000:00:12.0: supports D1 D2
[ 0.379798] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.379864] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.379980] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.380103] pci 0000:00:14.7: [1022:7906] type 00 class 0x080501
[ 0.380125] pci 0000:00:14.7: reg 0x10: [mem 0xff76c000-0xff76c0ff 64bit]
[ 0.380191] pci 0000:00:14.7: PME# supported from D3cold
[ 0.380255] pci 0000:00:18.0: [1022:1570] type 00 class 0x060000
[ 0.380316] pci 0000:00:18.1: [1022:1571] type 00 class 0x060000
[ 0.380374] pci 0000:00:18.2: [1022:1572] type 00 class 0x060000
[ 0.380441] pci 0000:00:18.3: [1022:1573] type 00 class 0x060000
[ 0.380503] pci 0000:00:18.4: [1022:1574] type 00 class 0x060000
[ 0.380588] pci 0000:00:18.5: [1022:1575] type 00 class 0x060000
[ 0.380729] pci 0000:01:00.0: [8086:1539] type 00 class 0x020000
[ 0.380762] pci 0000:01:00.0: reg 0x10: [mem 0xff600000-0xff61ffff]
[ 0.380790] pci 0000:01:00.0: reg 0x18: [io 0xe000-0xe01f]
[ 0.380802] pci 0000:01:00.0: reg 0x1c: [mem 0xff620000-0xff623fff]
[ 0.380931] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.381152] pci 0000:00:02.5: PCI bridge to [bus 01]
[ 0.381156] pci 0000:00:02.5: bridge window [io 0xe000-0xefff]
[ 0.381159] pci 0000:00:02.5: bridge window [mem 0xff600000-0xff6fffff]
[ 0.382174] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 14 15) *0
[ 0.382224] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 14 15) *0
[ 0.382266] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 14 15) *0
[ 0.382314] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 14 15) *0
[ 0.382358] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 14 15) *0
[ 0.382396] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 14 15) *0
[ 0.382433] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 14 15) *0
[ 0.382470] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 14 15) *0
[ 0.382874] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.382874] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.382874] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.382874] vgaarb: loaded
[ 0.382874] pps_core: LinuxPPS API ver. 1 registered
[ 0.382874] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.382874] PTP clock support registered
[ 0.382874] EDAC MC: Ver: 3.0.0
[ 0.382874] PCI: Using ACPI for IRQ routing
[ 0.382874] PCI: pci_cache_line_size set to 64 bytes
[ 0.382874] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.382874] e820: reserve RAM buffer [mem 0xdd4bc000-0xdfffffff]
[ 0.382874] e820: reserve RAM buffer [mem 0xdd6b9000-0xdfffffff]
[ 0.382874] e820: reserve RAM buffer [mem 0xddeeb000-0xdfffffff]
[ 0.382874] e820: reserve RAM buffer [mem 0xddf2b000-0xdfffffff]
[ 0.382874] e820: reserve RAM buffer [mem 0xde990000-0xdfffffff]
[ 0.382874] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.382874] e820: reserve RAM buffer [mem 0x3ff000000-0x3ffffffff]
[ 0.384604] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.384604] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.385621] clocksource: Switched to clocksource tsc-early
[ 0.396572] VFS: Disk quotas dquot_6.6.0
[ 0.396593] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.396748] AppArmor: AppArmor Filesystem Enabled
[ 0.396771] pnp: PnP ACPI init
[ 0.396959] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.396965] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.397030] system 00:01: [mem 0xc0000000-0xdfffffff] could not be reserved
[ 0.397033] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.397290] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.397437] system 00:03: [io 0x0a00-0x0a0f] has been reserved
[ 0.397438] system 00:03: [io 0x0a10-0x0a1f] has been reserved
[ 0.397439] system 00:03: [io 0x0a20-0x0a2f] has been reserved
[ 0.397440] system 00:03: [io 0x0a30-0x0a3f] has been reserved
[ 0.397443] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.397961] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.398197] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.398198] system 00:05: [io 0x040b] has been reserved
[ 0.398199] system 00:05: [io 0x04d6] has been reserved
[ 0.398201] system 00:05: [io 0x0c00-0x0c01] has been reserved
[ 0.398202] system 00:05: [io 0x0c14] has been reserved
[ 0.398203] system 00:05: [io 0x0c50-0x0c51] has been reserved
[ 0.398204] system 00:05: [io 0x0c52] has been reserved
[ 0.398205] system 00:05: [io 0x0c6c] has been reserved
[ 0.398205] system 00:05: [io 0x0c6f] has been reserved
[ 0.398207] system 00:05: [io 0x0cd0-0x0cd1] has been reserved
[ 0.398208] system 00:05: [io 0x0cd2-0x0cd3] has been reserved
[ 0.398209] system 00:05: [io 0x0cd4-0x0cd5] has been reserved
[ 0.398210] system 00:05: [io 0x0cd6-0x0cd7] has been reserved
[ 0.398211] system 00:05: [io 0x0cd8-0x0cdf] has been reserved
[ 0.398211] system 00:05: [io 0x0800-0x089f] has been reserved
[ 0.398213] system 00:05: [io 0x0b20-0x0b3f] has been reserved
[ 0.398213] system 00:05: [io 0x0900-0x090f] has been reserved
[ 0.398214] system 00:05: [io 0x0910-0x091f] has been reserved
[ 0.398216] system 00:05: [io 0xfe00-0xfefe] has been reserved
[ 0.398217] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.398219] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.398220] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.398221] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.398222] system 00:05: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.398226] system 00:05: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.398227] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.398228] system 00:05: [mem 0xfeb00000-0xfeb00fff] has been reserved
[ 0.398229] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.398232] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.398515] pnp: PnP ACPI: found 6 devices
[ 0.405119] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.405141] pci 0000:00:02.5: PCI bridge to [bus 01]
[ 0.405144] pci 0000:00:02.5: bridge window [io 0xe000-0xefff]
[ 0.405148] pci 0000:00:02.5: bridge window [mem 0xff600000-0xff6fffff]
[ 0.405156] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.405157] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.405158] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.405159] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.405160] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.405161] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.405162] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfed3ffff window]
[ 0.405163] pci_bus 0000:00: resource 11 [mem 0xfedca000-0xffffffff window]
[ 0.405165] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.405165] pci_bus 0000:01: resource 1 [mem 0xff600000-0xff6fffff]
[ 0.405273] NET: Registered protocol family 2
[ 0.405553] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.405609] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.405901] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.406169] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.406253] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.406334] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.406480] NET: Registered protocol family 1
[ 0.406489] NET: Registered protocol family 44
[ 0.406505] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.406511] pci 0000:00:01.1: Linked as a consumer to 0000:00:01.0
[ 0.417854] pci 0000:00:10.0: quirk_usb_early_handoff+0x0/0x6c1 took 11044 usecs
[ 0.441719] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c1 took 23286 usecs
[ 0.441768] PCI: CLS 0 bytes, default 64
[ 0.441842] Unpacking initramfs...
[ 1.100149] Freeing initrd memory: 45252K
[ 1.100246] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.100251] software IO TLB: mapped [mem 0xd94bc000-0xdd4bc000] (64MB)
[ 1.100289] amd_uncore: AMD NB counters detected
[ 1.100451] LVT offset 0 assigned for vector 0x400
[ 1.100551] perf: AMD IBS detected (0x000007ff)
[ 1.101202] Initialise system trusted keyrings
[ 1.101217] Key type blacklist registered
[ 1.101330] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 1.102581] zbud: loaded
[ 1.102777] pstore: using deflate compression
[ 1.252656] Key type asymmetric registered
[ 1.252658] Asymmetric key parser 'x509' registered
[ 1.252685] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.252752] io scheduler noop registered
[ 1.252752] io scheduler deadline registered
[ 1.252806] io scheduler cfq registered (default)
[ 1.252807] io scheduler mq-deadline registered
[ 1.253286] pcieport 0000:00:02.5: Signaling PME with IRQ 25
[ 1.253310] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.253769] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 1.253844] pstore: Registered erst as persistent store backend
[ 1.253946] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[ 1.254065] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.254537] Linux agpgart interface v0.103
[ 1.254789] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.254790] AMD IOMMUv2 functionality not available on this system
[ 1.255133] i8042: PNP: No PS/2 controller found.
[ 1.255225] mousedev: PS/2 mouse device common for all mice
[ 1.255256] rtc_cmos 00:02: RTC can wake from S4
[ 1.255386] rtc_cmos 00:02: registered as rtc0
[ 1.255400] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.255464] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.255998] NET: Registered protocol family 10
[ 1.264642] Segment Routing with IPv6
[ 1.264673] mip6: Mobile IPv6
[ 1.264676] NET: Registered protocol family 17
[ 1.264734] mpls_gso: MPLS GSO support
[ 1.265069] microcode: CPU0: patch_level=0x06006110
[ 1.265071] microcode: CPU1: patch_level=0x06006110
[ 1.265080] microcode: CPU2: patch_level=0x06006110
[ 1.265088] microcode: CPU3: patch_level=0x06006110
[ 1.265149] microcode: Microcode Update Driver: v2.2.
[ 1.265167] sched_clock: Marking stable (1262443348, 2700657)->(1376199469, -111055464)
[ 1.265389] registered taskstats version 1
[ 1.265390] Loading compiled-in X.509 certificates
[ 1.300069] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.300106] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 1.300150] zswap: loaded using pool lzo/zbud
[ 1.300255] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.300730] rtc_cmos 00:02: setting system clock to 2019-07-22 07:12:21 UTC (1563779541)
[ 1.302569] Freeing unused kernel image memory: 1580K
[ 1.317592] Write protecting the kernel read-only data: 16384k
[ 1.318351] Freeing unused kernel image memory: 2028K
[ 1.318700] Freeing unused kernel image memory: 912K
[ 1.325546] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.325553] Run /init as init process
[ 1.439903] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.439925] ACPI: Power Button [PWRB]
[ 1.440021] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.440036] ACPI: Power Button [PWRF]
[ 1.444844] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.445205] acpi device:01: registered as cooling_device4
[ 1.445254] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 1.453174] dca service started, version 1.12.1
[ 1.459377] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 1.459380] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 1.461975] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 1.461977] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.469123] cryptd: max_cpu_qlen set to 1000
[ 1.474641] ACPI: bus type USB registered
[ 1.475147] usbcore: registered new interface driver usbfs
[ 1.475166] usbcore: registered new interface driver hub
[ 1.475358] usbcore: registered new device driver usb
[ 1.479668] AVX2 version of gcm_enc/dec engaged.
[ 1.479669] AES CTR mode by8 optimization enabled
[ 1.484572] sdhci: Secure Digital Host Controller Interface driver
[ 1.484574] sdhci: Copyright(c) Pierre Ossman
[ 1.485802] SCSI subsystem initialized
[ 1.494682] pps pps0: new PPS source ptp0
[ 1.494685] igb 0000:01:00.0: added PHC on eth0
[ 1.494686] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 1.494688] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:90:fb:5e:a3:80
[ 1.494689] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
[ 1.494690] igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[ 1.496182] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7906] (rev 1)
[ 1.497171] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.500122] ehci-pci: EHCI PCI platform driver
[ 1.500435] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit
[ 1.500759] libata version 3.00 loaded.
[ 1.504101] ehci-pci 0000:00:12.0: EHCI Host Controller
[ 1.504117] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 1.504131] ehci-pci 0000:00:12.0: debug port 2
[ 1.504184] ehci-pci 0000:00:12.0: irq 18, io mem 0xff76d000
[ 1.506388] ahci 0000:00:11.0: version 3.0
[ 1.506617] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.506620] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
[ 1.509350] igb 0000:01:00.0 enp1s0: renamed from eth0
[ 1.510598] scsi host0: ahci
[ 1.510882] scsi host1: ahci
[ 1.511020] ata1: SATA max UDMA/133 abar m1024@0xff76e000 port 0xff76e100 irq 19
[ 1.511023] ata2: SATA max UDMA/133 abar m1024@0xff76e000 port 0xff76e180 irq 19
[ 1.516604] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
[ 1.516717] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.516719] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.516720] usb usb1: Product: EHCI Host Controller
[ 1.516721] usb usb1: Manufacturer: Linux 4.19.0-5-amd64 ehci_hcd
[ 1.516722] usb usb1: SerialNumber: 0000:00:12.0
[ 1.516892] hub 1-0:1.0: USB hub found
[ 1.516899] hub 1-0:1.0: 2 ports detected
[ 1.517132] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.517146] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.517342] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
[ 1.517691] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.517693] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.517694] usb usb2: Product: xHCI Host Controller
[ 1.517695] usb usb2: Manufacturer: Linux 4.19.0-5-amd64 xhci-hcd
[ 1.517696] usb usb2: SerialNumber: 0000:00:10.0
[ 1.517901] hub 2-0:1.0: USB hub found
[ 1.517913] hub 2-0:1.0: 4 ports detected
[ 1.518201] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.518205] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 1.518209] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[ 1.524281] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.524309] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 1.524310] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.524311] usb usb3: Product: xHCI Host Controller
[ 1.524312] usb usb3: Manufacturer: Linux 4.19.0-5-amd64 xhci-hcd
[ 1.524313] usb usb3: SerialNumber: 0000:00:10.0
[ 1.524492] hub 3-0:1.0: USB hub found
[ 1.524505] hub 3-0:1.0: 4 ports detected
[ 1.601695] [drm] amdgpu kernel modesetting enabled.
[ 1.612231] Parsing CRAT table with 1 nodes
[ 1.612237] Creating topology SYSFS entries
[ 1.612262] Topology: Add APU node [0x0:0x0]
[ 1.612262] Finished initializing topology
[ 1.612307] kfd kfd: Initialized module
[ 1.613475] [drm] initializing kernel modesetting (CARRIZO 0x1002:0x9874 0x1002:0x1841 0x84).
[ 1.613505] [drm] register mmio base: 0xFF700000
[ 1.613506] [drm] register mmio size: 262144
[ 1.613519] [drm] add ip block number 0 <vi_common>
[ 1.613520] [drm] add ip block number 1 <gmc_v8_0>
[ 1.613521] [drm] add ip block number 2 <cz_ih>
[ 1.613522] [drm] add ip block number 3 <powerplay>
[ 1.613524] [drm] add ip block number 4 <dm>
[ 1.613525] [drm] add ip block number 5 <gfx_v8_0>
[ 1.613526] [drm] add ip block number 6 <sdma_v3_0>
[ 1.613527] [drm] add ip block number 7 <uvd_v6_0>
[ 1.613528] [drm] add ip block number 8 <vce_v3_0>
[ 1.613528] [drm] add ip block number 9 <acp_ip>
[ 1.613545] [drm] UVD is enabled in physical mode
[ 1.613548] [drm] VCE enabled in physical mode
[ 1.628535] [drm] BIOS signature incorrect 20 7
[ 1.628625] ATOM BIOS: 113-C75100-027
[ 1.628685] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[ 1.628694] amdgpu 0000:00:01.0: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
[ 1.628696] amdgpu 0000:00:01.0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[ 1.628700] [drm] Detected VRAM RAM=512M, BAR=512M
[ 1.628701] [drm] RAM width 128bits UNKNOWN
[ 1.628807] [TTM] Zone kernel: Available graphics memory: 7929614 kiB
[ 1.628810] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.628811] [TTM] Initializing pool allocator
[ 1.628817] [TTM] Initializing DMA pool allocator
[ 1.628882] [drm] amdgpu: 512M of VRAM memory ready
[ 1.628884] [drm] amdgpu: 3072M of GTT memory ready.
[ 1.628913] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 1.628951] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[ 1.629129] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/carrizo_pfp.bin
[ 1.629147] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/carrizo_me.bin
[ 1.629162] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/carrizo_ce.bin
[ 1.629178] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/carrizo_rlc.bin
[ 1.629283] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/carrizo_mec.bin
[ 1.629406] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/carrizo_mec2.bin
[ 1.630512] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/carrizo_sdma.bin
[ 1.630535] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/carrizo_sdma1.bin
[ 1.630856] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/carrizo_uvd.bin
[ 1.630859] [drm] Found UVD firmware Version: 1.91 Family ID: 11
[ 1.630864] [drm] UVD ENC is disabled
[ 1.631589] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/carrizo_vce.bin
[ 1.631592] [drm] Found VCE firmware Version: 52.4 Binary ID: 3
[ 1.634453] [drm] DM_PPLIB: values for Engine clock
[ 1.634455] [drm] DM_PPLIB: 300000
[ 1.634456] [drm] DM_PPLIB: 360000
[ 1.634456] [drm] DM_PPLIB: 423530
[ 1.634457] [drm] DM_PPLIB: 514290
[ 1.634457] [drm] DM_PPLIB: 626090
[ 1.634457] [drm] DM_PPLIB: 720000
[ 1.634458] [drm] DM_PPLIB: 757900
[ 1.634458] [drm] DM_PPLIB: 800000
[ 1.634459] [drm] DM_PPLIB: Validation clocks:
[ 1.634459] [drm] DM_PPLIB: engine_max_clock: 80000
[ 1.634460] [drm] DM_PPLIB: memory_max_clock: 93300
[ 1.634460] [drm] DM_PPLIB: level : 8
[ 1.634461] [drm] DM_PPLIB: values for Display clock
[ 1.634462] [drm] DM_PPLIB: 300000
[ 1.634462] [drm] DM_PPLIB: 400000
[ 1.634462] [drm] DM_PPLIB: 496560
[ 1.634463] [drm] DM_PPLIB: 626090
[ 1.634463] [drm] DM_PPLIB: 685720
[ 1.634463] [drm] DM_PPLIB: 757900
[ 1.634464] [drm] DM_PPLIB: 800000
[ 1.634464] [drm] DM_PPLIB: 847060
[ 1.634464] [drm] DM_PPLIB: Validation clocks:
[ 1.634465] [drm] DM_PPLIB: engine_max_clock: 80000
[ 1.634465] [drm] DM_PPLIB: memory_max_clock: 93300
[ 1.634466] [drm] DM_PPLIB: level : 8
[ 1.634466] [drm] DM_PPLIB: values for Memory clock
[ 1.634467] [drm] DM_PPLIB: 667000
[ 1.634467] [drm] DM_PPLIB: 933000
[ 1.634467] [drm] DM_PPLIB: Validation clocks:
[ 1.634468] [drm] DM_PPLIB: engine_max_clock: 80000
[ 1.634468] [drm] DM_PPLIB: memory_max_clock: 93300
[ 1.634469] [drm] DM_PPLIB: level : 8
[ 1.644637] [drm] Display Core initialized with v3.1.59!
[ 1.677253] [drm] SADs count is: -2, don't need to read it
[ 1.695911] [drm] SADs count is: -2, don't need to read it
[ 1.701104] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.701105] [drm] Driver supports precise vblank timestamp query.
[ 1.729306] [drm] UVD initialized successfully.
[ 1.852595] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.856566] usb 2-2: new full-speed USB device number 2 using xhci_hcd
[ 1.928744] [drm] VCE initialized successfully.
[ 1.932266] kfd kfd: Allocated 3969056 bytes on gart
[ 1.932293] Topology: Add APU node [0x9874:0x1002]
[ 1.932329] kfd kfd: error getting iommu info. is the iommu enabled?
[ 1.932376] kfd kfd: Error initializing iommuv2
[ 1.932446] Creating topology SYSFS entries
[ 1.932514] kfd kfd: device 1002:9874 NOT added due to errors
[ 1.933905] [drm] fb mappable at 0x3FFEDC000
[ 1.933907] [drm] vram apper at 0x3FF000000
[ 1.933907] [drm] size 8294400
[ 1.933908] [drm] fb depth is 24
[ 1.933909] [drm] pitch is 7680
[ 1.934045] fbcon: amdgpudrmfb (fb0) is primary device
[ 1.984614] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.985483] ata1.00: supports DRM functions and may not be fully accessible
[ 1.985506] ata1.00: ATA-9: TS32GSSD510K-CRS, S0322B, max UDMA/133
[ 1.985507] ata1.00: 62533296 sectors, multi 2: LBA48 NCQ (depth 32), AA
[ 1.986029] ata1.00: supports DRM functions and may not be fully accessible
[ 1.986435] ata1.00: configured for UDMA/133
[ 1.986599] scsi 0:0:0:0: Direct-Access ATA TS32GSSD510K-CRS 2B PQ: 0 ANSI: 5
[ 1.988604] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.008910] usb 1-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
[ 2.008912] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.009057] hub 1-1:1.0: USB hub found
[ 2.009588] hub 1-1:1.0: 4 ports detected
[ 2.065316] usb 2-2: New USB device found, idVendor=04d8, idProduct=000a, bcdDevice= 1.00
[ 2.065317] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.065319] usb 2-2: Product: USBox 232 Unidesa Emula
[ 2.065319] usb 2-2: Manufacturer: Unidesa C32 Compiler
[ 2.072546] Console: switching to colour frame buffer device 240x67
[ 2.100591] tsc: Refined TSC clocksource calibration: 2096.065 MHz
[ 2.100597] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e36ab33d65, max_idle_ns: 440795245607 ns
[ 2.101733] clocksource: Switched to clocksource tsc
[ 2.105923] amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device
[ 2.125682] [drm] Initialized amdgpu 3.27.0 20150101 for 0000:00:01.0 on minor 0
[ 2.296593] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[ 2.410521] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c03e, bcdDevice=20.00
[ 2.410523] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.410524] usb 1-1.1: Product: USB-PS/2 Optical Mouse
[ 2.410525] usb 1-1.1: Manufacturer: Logitech
[ 2.415769] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.421052] usbcore: registered new interface driver usbhid
[ 2.421053] usbhid: USB HID core driver
[ 2.422499] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C03E.0001/input/input3
[ 2.422582] hid-generic 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-1.1/input0
[ 2.508595] usb 1-1.3: new low-speed USB device number 4 using ehci-pci
[ 2.627624] usb 1-1.3: New USB device found, idVendor=04b3, idProduct=3025, bcdDevice= 1.09
[ 2.627626] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.627627] usb 1-1.3: Product: USB NetVista Full Width Keyboard.
[ 2.627628] usb 1-1.3: Manufacturer: LITE-ON Technology
[ 2.632776] input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:04B3:3025.0002/input/input4
[ 2.692749] hid-generic 0003:04B3:3025.0002: input,hidraw1: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-0000:00:12.0-1.3/input0
[ 2.772594] usb 1-1.4: new high-speed USB device number 5 using ehci-pci
[ 2.882468] usb 1-1.4: New USB device found, idVendor=04b4, idProduct=6572, bcdDevice=32.99
[ 2.882470] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.882471] usb 1-1.4: Product: USB2.0 Hub
[ 2.883009] hub 1-1.4:1.0: USB hub found
[ 2.883339] hub 1-1.4:1.0: 4 ports detected
[ 3.172603] usb 1-1.4.3: new full-speed USB device number 6 using ehci-pci
[ 3.282546] usb 1-1.4.3: New USB device found, idVendor=04e2, idProduct=1414, bcdDevice= 0.03
[ 3.282548] usb 1-1.4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.364604] usb 1-1.4.4: new full-speed USB device number 7 using ehci-pci
[ 3.475727] usb 1-1.4.4: New USB device found, idVendor=04b4, idProduct=000a, bcdDevice= 0.00
[ 3.475729] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.475730] usb 1-1.4.4: Product: USB-Serial (Dual Channel)
[ 3.475731] usb 1-1.4.4: Manufacturer: Cypress Semiconductor
[ 7.188632] ata2.00: qc timeout (cmd 0x47)
[ 7.188646] ata2.00: READ LOG DMA EXT failed, trying PIO
[ 7.188649] ata2.00: NCQ Send/Recv Log not supported
[ 7.188651] ata2.00: ATA-10: CFast 3ME4, L17606, max UDMA/133
[ 7.188653] ata2.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 7.188663] ata2.00: failed to set xfermode (err_mask=0x40)
[ 7.664613] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7.674775] ata2.00: NCQ Send/Recv Log not supported
[ 7.690209] ata2.00: NCQ Send/Recv Log not supported
[ 7.690218] ata2.00: configured for UDMA/133
[ 7.690452] scsi 1:0:0:0: Direct-Access ATA CFast 3ME4 06 PQ: 0 ANSI: 5
[ 7.694638] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 7.694648] sd 0:0:0:0: [sda] Write Protect is off
[ 7.694649] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.694658] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.694674] sd 1:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 7.694680] sd 1:0:0:0: [sdb] Write Protect is off
[ 7.694681] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 7.694688] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.695368] sdb: sdb1 sdb2
[ 7.695728] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 7.696884] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ 7.697491] sd 0:0:0:0: [sda] supports TCG Opal
[ 7.697492] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.740876] ata1.00: exception Emask 0x0 SAct 0x70000083 SErr 0x0 action 0x0
[ 7.740914] ata1.00: irq_stat 0x40000008
[ 7.740930] ata1.00: failed command: READ FPDMA QUEUED
[ 7.740951] ata1.00: cmd 60/08:00:80:27:43/00:00:03:00:00/40 tag 0 ncq dma 4096 in
res 41/04:00:80:27:43/00:00:03:00:00/00 Emask 0x401 (device error) <F>
[ 7.741003] ata1.00: status: { DRDY ERR }
[ 7.741017] ata1.00: error: { ABRT }
[ 7.741154] ata1.00: supports DRM functions and may not be fully accessible
[ 7.741713] ata1.00: supports DRM functions and may not be fully accessible
[ 7.742121] ata1.00: configured for UDMA/133
[ 7.742139] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.742141] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current]
[ 7.742144] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command
[ 7.742147] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 03 43 27 80 00 00 08 00
[ 7.742149] print_req_error: I/O error, dev sda, sector 54732672
[ 7.742201] ata1: EH complete
[ 7.772775] ata1.00: exception Emask 0x0 SAct 0x3e20 SErr 0x0 action 0x0
[ 7.772807] ata1.00: irq_stat 0x40000008
[ 7.772824] ata1.00: failed command: READ FPDMA QUEUED
[ 7.772844] ata1.00: cmd 60/08:60:80:27:c3/00:00:02:00:00/40 tag 12 ncq dma 4096 in
res 41/04:00:80:27:c3/00:00:02:00:00/00 Emask 0x401 (device error) <F>
[ 7.772895] ata1.00: status: { DRDY ERR }
[ 7.772910] ata1.00: error: { ABRT }
[ 7.773043] ata1.00: supports DRM functions and may not be fully accessible
[ 7.773679] ata1.00: supports DRM functions and may not be fully accessible
[ 7.774119] ata1.00: configured for UDMA/133
[ 7.774157] sd 0:0:0:0: [sda] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.774159] sd 0:0:0:0: [sda] tag#12 Sense Key : Illegal Request [current]
[ 7.774162] sd 0:0:0:0: [sda] tag#12 Add. Sense: Unaligned write command
[ 7.774165] sd 0:0:0:0: [sda] tag#12 CDB: Read(10) 28 00 02 c3 27 80 00 00 08 00
[ 7.774167] print_req_error: I/O error, dev sda, sector 46344064
[ 7.774220] ata1: EH complete
[ 7.804800] ata1.00: exception Emask 0x0 SAct 0x100f8 SErr 0x0 action 0x0
[ 7.804833] ata1.00: irq_stat 0x40000008
[ 7.804850] ata1.00: failed command: READ FPDMA QUEUED
[ 7.804870] ata1.00: cmd 60/08:80:80:27:c3/00:00:02:00:00/40 tag 16 ncq dma 4096 in
res 41/04:00:80:27:c3/00:00:02:00:00/00 Emask 0x401 (device error) <F>
[ 7.804921] ata1.00: status: { DRDY ERR }
[ 7.804936] ata1.00: error: { ABRT }
[ 7.805114] ata1.00: supports DRM functions and may not be fully accessible
[ 7.805708] ata1.00: supports DRM functions and may not be fully accessible
[ 7.806124] ata1.00: configured for UDMA/133
[ 7.806144] ata1: EH complete
[ 7.824757] ata1.00: NCQ disabled due to excessive errors
[ 7.824760] ata1.00: exception Emask 0x0 SAct 0x7e0 SErr 0x0 action 0x0
[ 7.824792] ata1.00: irq_stat 0x40000008
[ 7.824807] ata1.00: failed command: READ FPDMA QUEUED
[ 7.824834] ata1.00: cmd 60/08:28:80:27:c3/00:00:02:00:00/40 tag 5 ncq dma 4096 in
res 41/04:00:80:27:c3/00:00:02:00:00/00 Emask 0x401 (device error) <F>
[ 7.824885] ata1.00: status: { DRDY ERR }
[ 7.824898] ata1.00: error: { ABRT }
[ 7.825026] ata1.00: supports DRM functions and may not be fully accessible
[ 7.825641] ata1.00: supports DRM functions and may not be fully accessible
[ 7.826078] ata1.00: configured for UDMA/133
[ 7.826102] ata1: EH complete
[ 7.840632] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.840664] ata1.00: irq_stat 0x40000001
[ 7.840680] ata1.00: failed command: READ DMA
[ 7.840698] ata1.00: cmd c8/00:08:80:27:03/00:00:00:00:00/e3 tag 30 dma 4096 in
res 51/04:08:80:27:03/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 7.840747] ata1.00: status: { DRDY ERR }
[ 7.840761] ata1.00: error: { ABRT }
[ 7.840925] ata1.00: supports DRM functions and may not be fully accessible
[ 7.841522] ata1.00: supports DRM functions and may not be fully accessible
[ 7.841954] ata1.00: configured for UDMA/133
[ 7.841968] sd 0:0:0:0: [sda] tag#30 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.841970] sd 0:0:0:0: [sda] tag#30 Sense Key : Illegal Request [current]
[ 7.841972] sd 0:0:0:0: [sda] tag#30 Add. Sense: Unaligned write command
[ 7.841975] sd 0:0:0:0: [sda] tag#30 CDB: Read(10) 28 00 03 03 27 80 00 00 08 00
[ 7.841977] print_req_error: I/O error, dev sda, sector 50538368
[ 7.842015] ata1: EH complete
[ 7.856634] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.856667] ata1.00: irq_stat 0x40000001
[ 7.856683] ata1.00: failed command: READ DMA
[ 7.856700] ata1.00: cmd c8/00:08:80:27:43/00:00:00:00:00/e3 tag 19 dma 4096 in
res 51/04:08:80:27:43/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 7.856749] ata1.00: status: { DRDY ERR }
[ 7.856763] ata1.00: error: { ABRT }
[ 7.856924] ata1.00: supports DRM functions and may not be fully accessible
[ 7.857502] ata1.00: supports DRM functions and may not be fully accessible
[ 7.857934] ata1.00: configured for UDMA/133
[ 7.857948] ata1: EH complete
[ 7.872633] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.872664] ata1.00: irq_stat 0x40000001
[ 7.872679] ata1.00: failed command: READ DMA
[ 7.872697] ata1.00: cmd c8/00:08:80:27:c3/00:00:00:00:00/e2 tag 5 dma 4096 in
res 51/04:08:80:27:c3/00:00:00:00:00/e2 Emask 0x1 (device error)
[ 7.872745] ata1.00: status: { DRDY ERR }
[ 7.872760] ata1.00: error: { ABRT }
[ 7.872923] ata1.00: supports DRM functions and may not be fully accessible
[ 7.873515] ata1.00: supports DRM functions and may not be fully accessible
[ 7.873948] ata1.00: configured for UDMA/133
[ 7.873961] ata1: EH complete
[ 7.900641] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.900673] ata1.00: irq_stat 0x40000001
[ 7.900688] ata1.00: failed command: READ DMA
[ 7.900706] ata1.00: cmd c8/00:08:80:27:03/00:00:00:00:00/e3 tag 8 dma 4096 in
res 51/04:08:80:27:03/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 7.900754] ata1.00: status: { DRDY ERR }
[ 7.900768] ata1.00: error: { ABRT }
[ 7.900959] ata1.00: supports DRM functions and may not be fully accessible
[ 7.901541] ata1.00: supports DRM functions and may not be fully accessible
[ 7.901972] ata1.00: configured for UDMA/133
[ 7.901987] ata1: EH complete
[ 7.916633] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.916664] ata1.00: irq_stat 0x40000001
[ 7.916679] ata1.00: failed command: READ DMA
[ 7.916697] ata1.00: cmd c8/00:08:80:27:43/00:00:00:00:00/e3 tag 10 dma 4096 in
res 51/04:08:80:27:43/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 7.918595] ata1.00: status: { DRDY ERR }
[ 7.919562] ata1.00: error: { ABRT }
[ 7.920655] ata1.00: supports DRM functions and may not be fully accessible
[ 7.921235] ata1.00: supports DRM functions and may not be fully accessible
[ 7.921664] ata1.00: configured for UDMA/133
[ 7.921678] ata1: EH complete
[ 7.936634] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.937613] ata1.00: irq_stat 0x40000001
[ 7.938569] ata1.00: failed command: READ DMA
[ 7.939528] ata1.00: cmd c8/00:08:80:27:c3/00:00:00:00:00/e2 tag 12 dma 4096 in
res 51/04:08:80:27:c3/00:00:00:00:00/e2 Emask 0x1 (device error)
[ 7.941475] ata1.00: status: { DRDY ERR }
[ 7.942428] ata1.00: error: { ABRT }
[ 7.943549] ata1.00: supports DRM functions and may not be fully accessible
[ 7.944132] ata1.00: supports DRM functions and may not be fully accessible
[ 7.944567] ata1.00: configured for UDMA/133
[ 7.944582] ata1: EH complete
[ 7.964634] ata1: limiting SATA link speed to 3.0 Gbps
[ 7.964637] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 7.965603] ata1.00: irq_stat 0x40000001
[ 7.966549] ata1.00: failed command: READ DMA
[ 7.967491] ata1.00: cmd c8/00:08:80:27:03/00:00:00:00:00/e3 tag 14 dma 4096 in
res 51/04:08:80:27:03/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 7.969412] ata1.00: status: { DRDY ERR }
[ 7.970359] ata1.00: error: { ABRT }
[ 7.971294] ata1: hard resetting link
[ 8.444612] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 8.445574] ata1.00: supports DRM functions and may not be fully accessible
[ 8.446173] ata1.00: supports DRM functions and may not be fully accessible
[ 8.446612] ata1.00: configured for UDMA/133
[ 8.446629] ata1: EH complete
[ 8.460630] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8.461589] ata1.00: irq_stat 0x40000001
[ 8.462531] ata1.00: failed command: READ DMA
[ 8.463466] ata1.00: cmd c8/00:08:80:27:43/00:00:00:00:00/e3 tag 16 dma 4096 in
res 51/04:08:80:27:43/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 8.465363] ata1.00: status: { DRDY ERR }
[ 8.466297] ata1.00: error: { ABRT }
[ 8.467400] ata1.00: supports DRM functions and may not be fully accessible
[ 8.467997] ata1.00: supports DRM functions and may not be fully accessible
[ 8.468436] ata1.00: configured for UDMA/133
[ 8.468448] ata1: EH complete
[ 8.488633] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8.489575] ata1.00: irq_stat 0x40000001
[ 8.490507] ata1.00: failed command: READ DMA
[ 8.491435] ata1.00: cmd c8/00:08:80:27:c3/00:00:00:00:00/e2 tag 18 dma 4096 in
res 51/04:08:80:27:c3/00:00:00:00:00/e2 Emask 0x1 (device error)
[ 8.493326] ata1.00: status: { DRDY ERR }
[ 8.494258] ata1.00: error: { ABRT }
[ 8.495362] ata1.00: supports DRM functions and may not be fully accessible
[ 8.495950] ata1.00: supports DRM functions and may not be fully accessible
[ 8.496388] ata1.00: configured for UDMA/133
[ 8.496403] ata1: EH complete
[ 8.516617] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8.517539] ata1.00: irq_stat 0x40000001
[ 8.518454] ata1.00: failed command: READ DMA
[ 8.519367] ata1.00: cmd c8/00:08:80:27:03/00:00:00:00:00/e3 tag 20 dma 4096 in
res 51/04:08:80:27:03/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 8.521217] ata1.00: status: { DRDY ERR }
[ 8.522138] ata1.00: error: { ABRT }
[ 8.523211] ata1.00: supports DRM functions and may not be fully accessible
[ 8.523781] ata1.00: supports DRM functions and may not be fully accessible
[ 8.524205] ata1.00: configured for UDMA/133
[ 8.524214] ata1: EH complete
[ 8.548635] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8.549572] ata1.00: irq_stat 0x40000001
[ 8.550499] ata1.00: failed command: READ DMA
[ 8.551420] ata1.00: cmd c8/00:08:80:27:43/00:00:00:00:00/e3 tag 22 dma 4096 in
res 51/04:08:80:27:43/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 8.553291] ata1.00: status: { DRDY ERR }
[ 8.554219] ata1.00: error: { ABRT }
[ 8.555319] ata1.00: supports DRM functions and may not be fully accessible
[ 8.555911] ata1.00: supports DRM functions and may not be fully accessible
[ 8.556349] ata1.00: configured for UDMA/133
[ 8.556364] ata1: EH complete
[ 8.576632] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8.577577] ata1.00: irq_stat 0x40000001
[ 8.578496] ata1.00: failed command: READ DMA
[ 8.579419] ata1.00: cmd c8/00:08:80:27:c3/00:00:00:00:00/e2 tag 24 dma 4096 in
res 51/04:08:80:27:c3/00:00:00:00:00/e2 Emask 0x1 (device error)
[ 8.581301] ata1.00: status: { DRDY ERR }
[ 8.582234] ata1.00: error: { ABRT }
[ 8.583330] ata1.00: supports DRM functions and may not be fully accessible
[ 8.583925] ata1.00: supports DRM functions and may not be fully accessible
[ 8.584362] ata1.00: configured for UDMA/133
[ 8.584378] sd 0:0:0:0: [sda] tag#24 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8.584380] sd 0:0:0:0: [sda] tag#24 Sense Key : Illegal Request [current]
[ 8.584382] sd 0:0:0:0: [sda] tag#24 Add. Sense: Unaligned write command
[ 8.584385] sd 0:0:0:0: [sda] tag#24 CDB: Read(10) 28 00 02 c3 27 80 00 00 08 00
[ 8.584387] print_req_error: I/O error, dev sda, sector 46344064
[ 8.585346] Buffer I/O error on dev sda3, logical block 524272, async page read
[ 8.586314] ata1: EH complete
[ 8.600645] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8.601607] ata1.00: irq_stat 0x40000001
[ 8.602545] ata1.00: failed command: READ DMA
[ 8.603481] ata1.00: cmd c8/00:08:80:27:03/00:00:00:00:00/e3 tag 26 dma 4096 in
res 51/04:08:80:27:03/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 8.605396] ata1.00: status: { DRDY ERR }
[ 8.606343] ata1.00: error: { ABRT }
[ 8.607454] ata1.00: supports DRM functions and may not be fully accessible
[ 8.608046] ata1.00: supports DRM functions and may not be fully accessible
[ 8.608483] ata1.00: configured for UDMA/133
[ 8.608498] ata1: EH complete
[ 8.624635] ata1: limiting SATA link speed to 1.5 Gbps
[ 8.624638] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 8.625601] ata1.00: irq_stat 0x40000001
[ 8.626545] ata1.00: failed command: READ DMA
[ 8.627485] ata1.00: cmd c8/00:08:80:27:43/00:00:00:00:00/e3 tag 28 dma 4096 in
res 51/04:08:80:27:43/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 8.629405] ata1.00: status: { DRDY ERR }
[ 8.630354] ata1.00: error: { ABRT }
[ 8.631293] ata1: hard resetting link
[ 9.104613] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9.105579] ata1.00: supports DRM functions and may not be fully accessible
[ 9.106198] ata1.00: supports DRM functions and may not be fully accessible
[ 9.106649] ata1.00: configured for UDMA/133
[ 9.106666] ata1: EH complete
[ 9.120632] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 9.121595] ata1.00: irq_stat 0x40000001
[ 9.122539] ata1.00: failed command: READ DMA
[ 9.123478] ata1.00: cmd c8/00:08:80:27:03/00:00:00:00:00/e3 tag 26 dma 4096 in
res 51/04:08:80:27:03/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 9.125397] ata1.00: status: { DRDY ERR }
[ 9.126345] ata1.00: error: { ABRT }
[ 9.127468] ata1.00: supports DRM functions and may not be fully accessible
[ 9.128083] ata1.00: supports DRM functions and may not be fully accessible
[ 9.128535] ata1.00: configured for UDMA/133
[ 9.128550] ata1: EH complete
[ 9.144633] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 9.145600] ata1.00: irq_stat 0x40000001
[ 9.146547] ata1.00: failed command: READ DMA
[ 9.147492] ata1.00: cmd c8/00:08:80:27:43/00:00:00:00:00/e3 tag 3 dma 4096 in
res 51/04:08:80:27:43/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 9.149425] ata1.00: status: { DRDY ERR }
[ 9.150377] ata1.00: error: { ABRT }
[ 9.151473] ata1.00: supports DRM functions and may not be fully accessible
[ 9.152082] ata1.00: supports DRM functions and may not be fully accessible
[ 9.152532] ata1.00: configured for UDMA/133
[ 9.152548] sd 0:0:0:0: [sda] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 9.152550] sd 0:0:0:0: [sda] tag#3 Sense Key : Illegal Request [current]
[ 9.152560] sd 0:0:0:0: [sda] tag#3 Add. Sense: Unaligned write command
[ 9.152563] sd 0:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 03 43 27 80 00 00 08 00
[ 9.152565] print_req_error: I/O error, dev sda, sector 54732672
[ 9.153517] Buffer I/O error on dev sda5, logical block 524272, async page read
[ 9.154492] ata1: EH complete
[ 9.176643] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 9.177619] ata1.00: irq_stat 0x40000001
[ 9.178578] ata1.00: failed command: READ DMA
[ 9.179532] ata1.00: cmd c8/00:08:80:27:03/00:00:00:00:00/e3 tag 28 dma 4096 in
res 51/04:08:80:27:03/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 9.181469] ata1.00: status: { DRDY ERR }
[ 9.182429] ata1.00: error: { ABRT }
[ 9.183566] ata1.00: supports DRM functions and may not be fully accessible
[ 9.184181] ata1.00: supports DRM functions and may not be fully accessible
[ 9.184636] ata1.00: configured for UDMA/133
[ 9.184653] sd 0:0:0:0: [sda] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 9.184655] sd 0:0:0:0: [sda] tag#28 Sense Key : Illegal Request [current]
[ 9.184657] sd 0:0:0:0: [sda] tag#28 Add. Sense: Unaligned write command
[ 9.184661] sd 0:0:0:0: [sda] tag#28 CDB: Read(10) 28 00 03 03 27 80 00 00 08 00
[ 9.184662] print_req_error: I/O error, dev sda, sector 50538368
[ 9.185625] Buffer I/O error on dev sda4, logical block 524272, async page read
[ 9.186640] ata1: EH complete
[ 9.374992] PM: Image not found (code -22)
[ 9.509362] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.753503] systemd[1]: Inserted module 'autofs4'
[ 9.775454] pstore: crypto_comp_decompress failed, ret = -22!
[ 9.776489] pstore: decompression failed: -22
[ 9.788823] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 9.808697] systemd[1]: Detected architecture x86-64.
[ 9.811167] systemd[1]: Set hostname to <ws-deb10>.
[ 9.947474] systemd[1]: Listening on udev Kernel Socket.
[ 9.947668] systemd[1]: Listening on Journal Socket.
[ 9.947885] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 9.947957] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 9.948021] systemd[1]: Listening on Syslog Socket.
[ 9.948045] systemd[1]: Reached target User and Group Name Lookups.
[ 9.948469] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 9.984314] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 10.123718] systemd-journald[281]: Received request to flush runtime journal from PID 1
[ 10.170508] audit: type=1400 audit(1563779550.365:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=309 comm="apparmor_parser"
[ 10.170961] audit: type=1400 audit(1563779550.365:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=306 comm="apparmor_parser"
[ 10.173517] audit: type=1400 audit(1563779550.369:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=307 comm="apparmor_parser"
[ 10.177832] audit: type=1400 audit(1563779550.373:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=310 comm="apparmor_parser"
[ 10.177836] audit: type=1400 audit(1563779550.373:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=310 comm="apparmor_parser"
[ 10.179365] audit: type=1400 audit(1563779550.373:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=312 comm="apparmor_parser"
[ 10.184343] audit: type=1400 audit(1563779550.377:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=308 comm="apparmor_parser"
[ 10.184347] audit: type=1400 audit(1563779550.377:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=308 comm="apparmor_parser"
[ 10.184349] audit: type=1400 audit(1563779550.377:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=308 comm="apparmor_parser"
[ 10.184351] audit: type=1400 audit(1563779550.377:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=308 comm="apparmor_parser"
[ 10.249657] acpi_cpufreq: overriding BIOS provided _PSD data
[ 10.320132] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 10.320216] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[ 10.320295] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 10.328604] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.329938] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 10.340837] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 10.382322] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
[ 10.385482] cdc_acm 1-1.4.3:1.0: ttyACM1: USB ACM device
[ 10.386398] cdc_acm 1-1.4.3:1.2: ttyACM2: USB ACM device
[ 10.387692] cdc_acm 1-1.4.3:1.4: ttyACM3: USB ACM device
[ 10.388348] cdc_acm 1-1.4.3:1.6: ttyACM4: USB ACM device
[ 10.388767] usbcore: registered new interface driver cdc_acm
[ 10.388768] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 10.392768] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 10.410725] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
[ 10.410786] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
[ 10.410833] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[ 10.420686] snd_hda_codec_cirrus hdaudioC1D0: autoconfig for CS4207: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[ 10.420689] snd_hda_codec_cirrus hdaudioC1D0: speaker_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 10.420691] snd_hda_codec_cirrus hdaudioC1D0: hp_outs=1 (0x9/0x0/0x0/0x0/0x0)
[ 10.420692] snd_hda_codec_cirrus hdaudioC1D0: mono: mono_out=0x0
[ 10.420693] snd_hda_codec_cirrus hdaudioC1D0: dig-out=0x10/0x15
[ 10.420694] snd_hda_codec_cirrus hdaudioC1D0: inputs:
[ 10.420695] snd_hda_codec_cirrus hdaudioC1D0: Mic=0xd
[ 10.420697] snd_hda_codec_cirrus hdaudioC1D0: Line=0xc
[ 10.420697] snd_hda_codec_cirrus hdaudioC1D0: dig-in=0x12
[ 10.438409] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:09.2/sound/card1/input9
[ 10.438469] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:09.2/sound/card1/input10
[ 10.438540] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:09.2/sound/card1/input11
[ 10.438590] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:09.2/sound/card1/input12
[ 10.481572] kvm: disabled by bios
[ 10.493765] MCE: In-kernel MCE decoding enabled.
[ 10.496134] EDAC amd64: Node 0: DRAM ECC disabled.
[ 10.496143] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 10.544682] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 10.544684] ata1.00: irq_stat 0x40000001
[ 10.544686] ata1.00: failed command: READ DMA
[ 10.544690] ata1.00: cmd c8/00:08:80:27:c3/00:00:00:00:00/e2 tag 16 dma 4096 in
res 51/04:08:80:27:c3/00:00:00:00:00/e2 Emask 0x1 (device error)
[ 10.544691] ata1.00: status: { DRDY ERR }
[ 10.544692] ata1.00: error: { ABRT }
[ 10.544830] ata1.00: supports DRM functions and may not be fully accessible
[ 10.545460] ata1.00: supports DRM functions and may not be fully accessible
[ 10.545894] ata1.00: configured for UDMA/133
[ 10.545907] sd 0:0:0:0: [sda] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 10.545909] sd 0:0:0:0: [sda] tag#16 Sense Key : Illegal Request [current]
[ 10.545911] sd 0:0:0:0: [sda] tag#16 Add. Sense: Unaligned write command
[ 10.545914] sd 0:0:0:0: [sda] tag#16 CDB: Read(10) 28 00 02 c3 27 80 00 00 08 00
[ 10.545916] print_req_error: I/O error, dev sda, sector 46344064
[ 10.545928] ata1: EH complete
[ 10.594597] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 10.594599] ata1.00: irq_stat 0x40000001
[ 10.594601] ata1.00: failed command: READ DMA
[ 10.594605] ata1.00: cmd c8/00:08:80:27:43/00:00:00:00:00/e3 tag 9 dma 4096 in
res 51/04:08:80:27:43/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 10.594606] ata1.00: status: { DRDY ERR }
[ 10.594607] ata1.00: error: { ABRT }
[ 10.594756] ata1.00: supports DRM functions and may not be fully accessible
[ 10.595386] ata1.00: supports DRM functions and may not be fully accessible
[ 10.595827] ata1.00: configured for UDMA/133
[ 10.595843] sd 0:0:0:0: [sda] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 10.595846] sd 0:0:0:0: [sda] tag#9 Sense Key : Illegal Request [current]
[ 10.595848] sd 0:0:0:0: [sda] tag#9 Add. Sense: Unaligned write command
[ 10.595850] sd 0:0:0:0: [sda] tag#9 CDB: Read(10) 28 00 03 43 27 80 00 00 08 00
[ 10.595852] print_req_error: I/O error, dev sda, sector 54732672
[ 10.595869] ata1: EH complete
[ 10.648636] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 10.648639] ata1.00: irq_stat 0x40000001
[ 10.648643] ata1.00: failed command: READ DMA
[ 10.648652] ata1.00: cmd c8/00:08:80:27:03/00:00:00:00:00/e3 tag 15 dma 4096 in
res 51/04:08:80:27:03/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 10.648654] ata1.00: status: { DRDY ERR }
[ 10.648656] ata1.00: error: { ABRT }
[ 10.648801] ata1.00: supports DRM functions and may not be fully accessible
[ 10.649405] ata1.00: supports DRM functions and may not be fully accessible
[ 10.666001] ata1.00: configured for UDMA/133
[ 10.666016] sd 0:0:0:0: [sda] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 10.666018] sd 0:0:0:0: [sda] tag#15 Sense Key : Illegal Request [current]
[ 10.666019] sd 0:0:0:0: [sda] tag#15 Add. Sense: Unaligned write command
[ 10.666022] sd 0:0:0:0: [sda] tag#15 CDB: Read(10) 28 00 03 03 27 80 00 00 08 00
[ 10.666024] print_req_error: I/O error, dev sda, sector 50538368
[ 10.666042] ata1: EH complete
[ 10.708647] ata1.00: limiting speed to UDMA/100:PIO4
[ 10.708652] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 10.708654] ata1.00: irq_stat 0x40000001
[ 10.708662] ata1.00: failed command: READ DMA
[ 10.715026] ata1.00: cmd c8/00:08:80:27:c3/00:00:00:00:00/e2 tag 24 dma 4096 in
res 51/04:08:80:27:c3/00:00:00:00:00/e2 Emask 0x1 (device error)
[ 10.719520] ata1.00: status: { DRDY ERR }
[ 10.720696] ata1.00: error: { ABRT }
[ 10.721687] ata1: hard resetting link
[ 10.728853] Adding 8779000k swap on /dev/sdb2. Priority:-2 extents:1 across:8779000k SSFS
[ 11.197218] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 11.198145] ata1.00: supports DRM functions and may not be fully accessible
[ 11.198823] ata1.00: supports DRM functions and may not be fully accessible
[ 11.199353] ata1.00: configured for UDMA/100
[ 11.199368] ata1: EH complete
[ 11.224662] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 11.226386] ata1.00: irq_stat 0x40000001
[ 11.228122] ata1.00: failed command: READ DMA
[ 11.230088] ata1.00: cmd c8/00:08:80:27:03/00:00:00:00:00/e3 tag 30 dma 4096 in
res 51/04:08:80:27:03/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 11.233771] ata1.00: status: { DRDY ERR }
[ 11.235715] ata1.00: error: { ABRT }
[ 11.237882] ata1.00: supports DRM functions and may not be fully accessible
[ 11.240942] ata1.00: supports DRM functions and may not be fully accessible
[ 11.241430] ata1.00: configured for UDMA/100
[ 11.241446] ata1: EH complete
[ 11.246241] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 11.276669] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 11.277468] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 11.278669] ata1.00: irq_stat 0x40000001
[ 11.278672] ata1.00: failed command: READ DMA
[ 11.278679] ata1.00: cmd c8/00:08:80:27:43/00:00:00:00:00/e3 tag 2 dma 4096 in
res 51/04:08:80:27:43/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 11.278681] ata1.00: status: { DRDY ERR }
[ 11.278682] ata1.00: error: { ABRT }
[ 11.281487] ata1.00: supports DRM functions and may not be fully accessible
[ 11.287518] ata1.00: supports DRM functions and may not be fully accessible
[ 11.287982] ata1.00: configured for UDMA/100
[ 11.287995] ata1: EH complete
[ 11.316750] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 11.318500] ata1.00: irq_stat 0x40000001
[ 11.320369] ata1.00: failed command: READ DMA
[ 11.322331] ata1.00: cmd c8/00:08:80:27:c3/00:00:00:00:00/e2 tag 17 dma 4096 in
res 51/04:08:80:27:c3/00:00:00:00:00/e2 Emask 0x1 (device error)
[ 11.325864] ata1.00: status: { DRDY ERR }
[ 11.327633] ata1.00: error: { ABRT }
[ 11.329418] ata1.00: supports DRM functions and may not be fully accessible
[ 11.330019] ata1.00: supports DRM functions and may not be fully accessible
[ 11.330501] ata1.00: configured for UDMA/100
[ 11.330515] ata1: EH complete
[ 11.356681] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 11.358892] ata1.00: irq_stat 0x40000001
[ 11.361201] ata1.00: failed command: READ DMA
[ 11.363360] ata1.00: cmd c8/00:08:80:27:03/00:00:00:00:00/e3 tag 4 dma 4096 in
res 51/04:08:80:27:03/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 11.367616] ata1.00: status: { DRDY ERR }
[ 11.369893] ata1.00: error: { ABRT }
[ 11.372522] ata1.00: supports DRM functions and may not be fully accessible
[ 11.373149] ata1.00: supports DRM functions and may not be fully accessible
[ 11.373584] ata1.00: configured for UDMA/100
[ 11.373598] ata1: EH complete
[ 11.396651] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 11.398418] ata1.00: irq_stat 0x40000001
[ 11.400252] ata1.00: failed command: READ DMA
[ 11.402306] ata1.00: cmd c8/00:08:80:27:43/00:00:00:00:00/e3 tag 6 dma 4096 in
res 51/04:08:80:27:43/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 11.405202] ata1.00: status: { DRDY ERR }
[ 11.406281] ata1.00: error: { ABRT }
[ 11.407355] ata1.00: supports DRM functions and may not be fully accessible
[ 11.407919] ata1.00: supports DRM functions and may not be fully accessible
[ 11.408346] ata1.00: configured for UDMA/100
[ 11.408356] ata1: EH complete
[ 11.432651] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 11.434477] ata1.00: irq_stat 0x40000001
[ 11.436207] ata1.00: failed command: READ DMA
[ 11.438025] ata1.00: cmd c8/00:08:80:27:c3/00:00:00:00:00/e2 tag 8 dma 4096 in
res 51/04:08:80:27:c3/00:00:00:00:00/e2 Emask 0x1 (device error)
[ 11.441378] ata1.00: status: { DRDY ERR }
[ 11.443178] ata1.00: error: { ABRT }
[ 11.445571] ata1.00: supports DRM functions and may not be fully accessible
[ 11.446179] ata1.00: supports DRM functions and may not be fully accessible
[ 11.446672] ata1.00: configured for UDMA/100
[ 11.446691] ata1: EH complete
[ 11.464708] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 11.466870] ata1.00: irq_stat 0x40000001
[ 11.469020] ata1.00: failed command: READ DMA
[ 11.470861] ata1.00: cmd c8/00:08:80:27:03/00:00:00:00:00/e3 tag 27 dma 4096 in
res 51/04:08:80:27:03/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 11.474192] ata1.00: status: { DRDY ERR }
[ 11.476085] ata1.00: error: { ABRT }
[ 11.478164] ata1.00: supports DRM functions and may not be fully accessible
[ 11.478792] ata1.00: supports DRM functions and may not be fully accessible
[ 11.479228] ata1.00: configured for UDMA/100
[ 11.479245] ata1: EH complete
[ 11.492696] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 11.495528] ata1.00: irq_stat 0x40000001
[ 11.497934] ata1.00: failed command: READ DMA
[ 11.500282] ata1.00: cmd c8/00:08:80:27:43/00:00:00:00:00/e3 tag 29 dma 4096 in
res 51/04:08:80:27:43/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 11.504448] ata1.00: status: { DRDY ERR }
[ 11.506533] ata1.00: error: { ABRT }
[ 11.508755] ata1.00: supports DRM functions and may not be fully accessible
[ 11.509325] ata1.00: supports DRM functions and may not be fully accessible
[ 11.509758] ata1.00: configured for UDMA/100
[ 11.509770] ata1: EH complete
[ 11.540819] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 11.541960] ata1.00: irq_stat 0x40000001
[ 11.543026] ata1.00: failed command: READ DMA
[ 11.544125] ata1.00: cmd c8/00:08:80:27:c3/00:00:00:00:00/e2 tag 10 dma 4096 in
res 51/04:08:80:27:c3/00:00:00:00:00/e2 Emask 0x1 (device error)
[ 11.546333] ata1.00: status: { DRDY ERR }
[ 11.547332] ata1.00: error: { ABRT }
[ 11.548462] ata1.00: supports DRM functions and may not be fully accessible
[ 11.549250] ata1.00: supports DRM functions and may not be fully accessible
[ 11.549710] ata1.00: configured for UDMA/100
[ 11.549727] ata1: EH complete
[ 11.580665] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 11.580671] ata1.00: irq_stat 0x40000001
[ 11.580674] ata1.00: failed command: READ DMA
[ 11.580679] ata1.00: cmd c8/00:08:80:27:03/00:00:00:00:00/e3 tag 7 dma 4096 in
res 51/04:08:80:27:03/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 11.580682] ata1.00: status: { DRDY ERR }
[ 11.580683] ata1.00: error: { ABRT }
[ 11.580808] ata1.00: supports DRM functions and may not be fully accessible
[ 11.581381] ata1.00: supports DRM functions and may not be fully accessible
[ 11.581808] ata1.00: configured for UDMA/100
[ 11.581817] ata1: EH complete
[ 11.608686] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 11.608694] ata1.00: irq_stat 0x40000001
[ 11.608699] ata1.00: failed command: READ DMA
[ 11.608709] ata1.00: cmd c8/00:08:80:27:43/00:00:00:00:00/e3 tag 12 dma 4096 in
res 51/04:08:80:27:43/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 11.608714] ata1.00: status: { DRDY ERR }
[ 11.608717] ata1.00: error: { ABRT }
[ 11.608863] ata1.00: supports DRM functions and may not be fully accessible
[ 11.609496] ata1.00: supports DRM functions and may not be fully accessible
[ 11.609963] ata1.00: configured for UDMA/100
[ 11.609984] ata1: EH complete
[ 11.624675] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 11.624682] ata1.00: irq_stat 0x40000001
[ 11.624687] ata1.00: failed command: READ DMA
[ 11.624695] ata1.00: cmd c8/00:08:80:27:c3/00:00:00:00:00/e2 tag 9 dma 4096 in
res 51/04:08:80:27:c3/00:00:00:00:00/e2 Emask 0x1 (device error)
[ 11.624700] ata1.00: status: { DRDY ERR }
[ 11.624702] ata1.00: error: { ABRT }
[ 11.624845] ata1.00: supports DRM functions and may not be fully accessible
[ 11.625453] ata1.00: supports DRM functions and may not be fully accessible
[ 11.625917] ata1.00: configured for UDMA/100
[ 11.625933] ata1: EH complete
[ 11.640722] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 11.640728] ata1.00: irq_stat 0x40000001
[ 11.640733] ata1.00: failed command: READ DMA
[ 11.640742] ata1.00: cmd c8/00:08:80:27:03/00:00:00:00:00/e3 tag 0 dma 4096 in
res 51/04:08:80:27:03/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 11.640747] ata1.00: status: { DRDY ERR }
[ 11.640750] ata1.00: error: { ABRT }
[ 11.640887] ata1.00: supports DRM functions and may not be fully accessible
[ 11.641489] ata1.00: supports DRM functions and may not be fully accessible
[ 11.641929] ata1.00: configured for UDMA/100
[ 11.641942] ata1: EH complete
[ 11.668698] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 11.668705] ata1.00: irq_stat 0x40000001
[ 11.668709] ata1.00: failed command: READ DMA
[ 11.668718] ata1.00: cmd c8/00:08:80:27:43/00:00:00:00:00/e3 tag 2 dma 4096 in
res 51/04:08:80:27:43/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 11.668722] ata1.00: status: { DRDY ERR }
[ 11.668725] ata1.00: error: { ABRT }
[ 11.668869] ata1.00: supports DRM functions and may not be fully accessible
[ 11.669517] ata1.00: supports DRM functions and may not be fully accessible
[ 11.669967] ata1.00: configured for UDMA/100
[ 11.669986] ata1: EH complete
[ 11.692665] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 11.692669] ata1.00: irq_stat 0x40000001
[ 11.692673] ata1.00: failed command: READ DMA
[ 11.692677] ata1.00: cmd c8/00:08:80:27:c3/00:00:00:00:00/e2 tag 19 dma 4096 in
res 51/04:08:80:27:c3/00:00:00:00:00/e2 Emask 0x1 (device error)
[ 11.692680] ata1.00: status: { DRDY ERR }
[ 11.692681] ata1.00: error: { ABRT }
[ 11.692981] ata1.00: supports DRM functions and may not be fully accessible
[ 11.693594] ata1.00: supports DRM functions and may not be fully accessible
[ 11.694050] ata1.00: configured for UDMA/100
[ 11.694072] sd 0:0:0:0: [sda] tag#19 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 11.694077] sd 0:0:0:0: [sda] tag#19 Sense Key : Illegal Request [current]
[ 11.694082] sd 0:0:0:0: [sda] tag#19 Add. Sense: Unaligned write command
[ 11.694087] sd 0:0:0:0: [sda] tag#19 CDB: Read(10) 28 00 02 c3 27 80 00 00 08 00
[ 11.694090] print_req_error: I/O error, dev sda, sector 46344064
[ 11.694098] Buffer I/O error on dev sda3, logical block 524272, async page read
[ 11.694139] ata1: EH complete
[ 11.720689] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 11.720696] ata1.00: irq_stat 0x40000001
[ 11.720701] ata1.00: failed command: READ DMA
[ 11.720709] ata1.00: cmd c8/00:08:80:27:03/00:00:00:00:00/e3 tag 11 dma 4096 in
res 51/04:08:80:27:03/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 11.720713] ata1.00: status: { DRDY ERR }
[ 11.720716] ata1.00: error: { ABRT }
[ 11.720862] ata1.00: supports DRM functions and may not be fully accessible
[ 11.721489] ata1.00: supports DRM functions and may not be fully accessible
[ 11.721941] ata1.00: configured for UDMA/100
[ 11.721959] Buffer I/O error on dev sda4, logical block 524272, async page read
[ 11.721998] ata1: EH complete
[ 11.748710] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 11.748717] ata1.00: irq_stat 0x40000001
[ 11.748721] ata1.00: failed command: READ DMA
[ 11.748730] ata1.00: cmd c8/00:08:80:27:43/00:00:00:00:00/e3 tag 13 dma 4096 in
res 51/04:08:80:27:43/00:00:00:00:00/e3 Emask 0x1 (device error)
[ 11.748734] ata1.00: status: { DRDY ERR }
[ 11.748736] ata1.00: error: { ABRT }
[ 11.748883] ata1.00: supports DRM functions and may not be fully accessible
[ 11.749526] ata1.00: supports DRM functions and may not be fully accessible
[ 11.749981] ata1.00: configured for UDMA/100
[ 11.750000] Buffer I/O error on dev sda5, logical block 524272, async page read
[ 11.750038] ata1: EH complete
[ 14.189538] igb 0000:01:00.0 enp1s0: igb: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 14.297181] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[ 15.173250] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 15.175236] Bridge firewalling registered
[ 15.490486] Initializing XFRM netlink socket
[ 15.643801] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 140.901027] fuse init (API version 7.27)
^ permalink raw reply [flat|nested] 8+ messages in thread