Linux-ide Archive on
 help / color / Atom feed
From: Geert Uytterhoeven <>
To: Michael Schmitz <>
Cc: "Linux/m68k" <>,,
	Bartlomiej Zolnierkiewicz <>
Subject: Re: [PATCH 1/2] m68k/atari: add platform device for Falcon IDE port
Date: Tue, 3 Sep 2019 14:40:05 +0200
Message-ID: <> (raw)
In-Reply-To: <>

Hi Michael,

On Tue, Jul 2, 2019 at 12:02 AM Michael Schmitz <> wrote:
> Autoloading of Falcon IDE driver modules requires converting
> these drivers to platform drivers.
> Add platform device for Falcon IDE interface in Atari platform
> setup code in preparation for this.
> Signed-off-by: Michael Schmitz <>
> --
> Changes from RFC
> - fix region size (spotted by Szymon Bieganski <>)
> - define IDE interface address in atari/config.c, create platform device
>   always (suggested by Geert Uytterhoeven <>)

Thanks for the update!

Looks good to me.  However, with just this patch applied, pata_falcon
fails with:

    pata_falcon: Atari Falcon PATA controller
    pata_falcon: resources busy

To avoid bisection issues, probably both patches should be combined into a
single patch.



Geert Uytterhoeven -- There's lots of Linux beyond ia32 --

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

  parent reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-01 22:02 [PATCH 0/2] Convert Atari Falcon IDE driver to platform device Michael Schmitz
2019-07-01 22:02 ` [PATCH 1/2] m68k/atari: add platform device for Falcon IDE port Michael Schmitz
2019-07-02 12:50   ` Bartlomiej Zolnierkiewicz
2019-09-03 12:40   ` Geert Uytterhoeven [this message]
2019-07-01 22:02 ` [PATCH 2/2] drivers/ata: convert pata_falcon to arch platform device Michael Schmitz
2019-07-02 12:51   ` Bartlomiej Zolnierkiewicz
2019-07-30 11:59     ` John Paul Adrian Glaubitz
2019-09-03 12:44   ` Geert Uytterhoeven

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ide Archive on

Archives are clonable:
	git clone --mirror linux-ide/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-ide linux-ide/ \
	public-inbox-index linux-ide

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox