linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Damien Le Moal <Damien.LeMoal@wdc.com>
To: "Reimar Döffinger" <Reimar.Doeffinger@gmx.de>,
	"linux-ide@vger.kernel.org" <linux-ide@vger.kernel.org>,
	"Jens Axboe" <axboe@kernel.dk>,
	"hch@infradead.org" <hch@infradead.org>
Subject: Re: [PATCH] libata: fix setting and checking of DMA state.
Date: Wed, 18 Aug 2021 23:30:48 +0000	[thread overview]
Message-ID: <DM6PR04MB7081AB7034F116CDFBA43890E7FF9@DM6PR04MB7081.namprd04.prod.outlook.com> (raw)
In-Reply-To: <20210817190308.29065-1-Reimar.Doeffinger@gmx.de>

On 2021/08/18 4:03, Reimar Döffinger wrote:
> Checking if DMA is enabled should be done via the
> ata_dma_enabled helper function.
> Update dma_mode initialization so that SATA devices
> are reported as DMA enabled.

Please drop the period at the end of the patch title

> ---
>  drivers/ata/libata-core.c | 4 ++--
>  include/linux/ata.h       | 1 +
>  2 files changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
> index 9934f6c465f4..a5fe20bb22d6 100644
> --- a/drivers/ata/libata-core.c
> +++ b/drivers/ata/libata-core.c
> @@ -2004,7 +2004,7 @@ unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
>  
>  retry:
>  	ata_tf_init(dev, &tf);
> -	if (dev->dma_mode && ata_id_has_read_log_dma_ext(dev->id) &&
> +	if (ata_dma_enabled(dev) && ata_id_has_read_log_dma_ext(dev->id) &&

This change is OK I think. Note that there are many other places where
dev->dma_mode is testing directly. It may be good to check those too.

>  	    !(dev->horkage & ATA_HORKAGE_NO_DMA_LOG)) {
>  		tf.command = ATA_CMD_READ_LOG_DMA_EXT;
>  		tf.protocol = ATA_PROT_DMA;
> @@ -2824,7 +2824,7 @@ int ata_bus_probe(struct ata_port *ap)
>  		 * bus as we may be talking too fast.
>  		 */
>  		dev->pio_mode = XFER_PIO_0;
> -		dev->dma_mode = 0xff;
> +		dev->dma_mode = ap->flags & ATA_FLAG_SATA ? XFER_SATA : 0xff;

This however is not OK I think. You are setting a transfer speed without going
through the link speed negotiation.

>  
>  		/* If the controller has a pio mode setup function
>  		 * then use it to set the chipset to rights. Don't
> diff --git a/include/linux/ata.h b/include/linux/ata.h
> index 1b44f40c7700..7bb2c2acbc42 100644
> --- a/include/linux/ata.h
> +++ b/include/linux/ata.h
> @@ -374,6 +374,7 @@ enum {
>  
>  	/* SETFEATURES stuff */
>  	SETFEATURES_XFER	= 0x03,
> +	XFER_SATA               = 0x48,

Where does this come from ?

>  	XFER_UDMA_7		= 0x47,
>  	XFER_UDMA_6		= 0x46,
>  	XFER_UDMA_5		= 0x45,
> 


-- 
Damien Le Moal
Western Digital Research

  reply	other threads:[~2021-08-18 23:30 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-14 13:47 [PATCH] libata: add kernel parameter to force ATA_HORKAGE_NO_DMA_LOG Reimar Döffinger
2021-08-15  8:18 ` Christoph Hellwig
2021-08-15 16:27   ` [PATCH] libata: Disable ATA_CMD_READ_LOG_DMA_EXT in problematic cases Reimar Döffinger
2021-08-16  0:10     ` Damien Le Moal
2021-08-16 17:15       ` Reimar Döffinger
2021-08-17 19:06         ` Reimar Döffinger
2021-08-18 22:49         ` Damien Le Moal
2021-08-16 17:26       ` Reimar Döffinger
2021-08-17  7:45         ` Damien Le Moal
2021-08-17 18:01           ` Reimar Döffinger
2021-08-17 19:03             ` [PATCH] libata: fix setting and checking of DMA state Reimar Döffinger
2021-08-18 23:30               ` Damien Le Moal [this message]
2021-08-19  8:13                 ` [PATCH] libata: fix " Reimar Döffinger
2021-08-19 12:56                   ` Reimar Döffinger
2021-09-27  8:56                   ` Paul Menzel
2021-09-27  9:10                     ` Reimar Döffinger
2021-09-27  9:15                       ` Damien Le Moal
2021-10-03 13:28                         ` [PATCH v4] Fixes to DMA state check Reimar Döffinger
2021-10-03 13:28                           ` [PATCH 1/6] libata: fix checking of DMA state Reimar Döffinger
2021-10-03 13:28                           ` [PATCH 2/6] libata-scsi: " Reimar Döffinger
2021-10-03 13:28                           ` [PATCH 3/6] pata_ali: " Reimar Döffinger
2021-10-03 13:28                           ` [PATCH 4/6] pata_amd: " Reimar Döffinger
2021-10-03 13:28                           ` [PATCH 5/6] pata_optidma: " Reimar Döffinger
2021-10-03 13:28                           ` [PATCH 6/6] pata_radisys: " Reimar Döffinger
2021-10-12  2:20                           ` [PATCH v4] Fixes to DMA state check Damien Le Moal
2021-10-12  6:30                             ` Reimar Döffinger
     [not found]                             ` <605EE991-5DA2-4A8D-9691-967D68D3AB51@gmx.de>
2021-10-12  6:32                               ` Damien Le Moal
2021-10-12  6:33                               ` Damien Le Moal
2021-08-15 16:34   ` [PATCH] libata: add kernel parameter to force ATA_HORKAGE_NO_DMA_LOG Reimar Döffinger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=DM6PR04MB7081AB7034F116CDFBA43890E7FF9@DM6PR04MB7081.namprd04.prod.outlook.com \
    --to=damien.lemoal@wdc.com \
    --cc=Reimar.Doeffinger@gmx.de \
    --cc=axboe@kernel.dk \
    --cc=hch@infradead.org \
    --cc=linux-ide@vger.kernel.org \
    --subject='Re: [PATCH] libata: fix setting and checking of DMA state.' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).