Linux-ide Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] ata_piix: remove open-coded dmi_match(DMI_OEM_STRING)
@ 2019-08-25 12:31 Michał Mirosław
  0 siblings, 0 replies; only message in thread
From: Michał Mirosław @ 2019-08-25 12:31 UTC (permalink / raw)
  To: linux-ide; +Cc: Jens Axboe, linux-kernel

Since de40614de99 ("firmware: dmi_scan: Add DMI_OEM_STRING support to
dmi_matches") dmi_check_system() can match OEM_STRINGs itself.
Use the feature.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
---
 drivers/ata/ata_piix.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index e4da725381d3..3ca7720e7d8f 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -840,6 +840,12 @@ static int piix_broken_suspend(void)
 				DMI_MATCH(DMI_PRODUCT_NAME, "Tecra M3"),
 			},
 		},
+		{
+			.ident = "TECRA M3",
+			.matches = {
+				DMI_MATCH(DMI_OEM_STRING, "Tecra M3,"),
+			},
+		},
 		{
 			.ident = "TECRA M4",
 			.matches = {
@@ -955,18 +961,10 @@ static int piix_broken_suspend(void)
 
 		{ }	/* terminate list */
 	};
-	static const char *oemstrs[] = {
-		"Tecra M3,",
-	};
-	int i;
 
 	if (dmi_check_system(sysids))
 		return 1;
 
-	for (i = 0; i < ARRAY_SIZE(oemstrs); i++)
-		if (dmi_find_device(DMI_DEV_TYPE_OEM_STRING, oemstrs[i], NULL))
-			return 1;
-
 	/* TECRA M4 sometimes forgets its identify and reports bogus
 	 * DMI information.  As the bogus information is a bit
 	 * generic, match as many entries as possible.  This manual
-- 
2.20.1


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-25 12:31 [PATCH] ata_piix: remove open-coded dmi_match(DMI_OEM_STRING) Michał Mirosław

Linux-ide Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-ide/0 linux-ide/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-ide linux-ide/ https://lore.kernel.org/linux-ide \
		linux-ide@vger.kernel.org linux-ide@archiver.kernel.org
	public-inbox-index linux-ide


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-ide


AGPL code for this site: git clone https://public-inbox.org/ public-inbox