From: Michael Schmitz <schmitzmic@gmail.com>
To: Brad Boyer <flar@allandria.com>
Cc: Finn Thain <fthain@linux-m68k.org>,
linux-m68k@vger.kernel.org, geert@linux-m68k.org,
linux-ide@vger.kernel.org
Subject: Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
Date: Sun, 6 Jun 2021 10:05:05 +1200 [thread overview]
Message-ID: <b5109814-ebc3-4cef-3377-32725e0056d0@gmail.com> (raw)
In-Reply-To: <20210605060447.GA18461@allandria.com>
Hi Brad,
Am 05.06.2021 um 18:04 schrieb Brad Boyer:
>>
>> Not sure what card socket code the APNE driver uses - must be one of the
>> generic variants from drivers/pcmcia. If your PB190 needs something not
>> already in there, we'd need to add that as well.
>
> I had to look a bit, but I found it. The apne driver doesn't use the
> normal PCMCIA infrastructure at all. There is a custom Amiga PCMCIA
> thing found in arch/m68k/amiga/pcmcia.c. This could complicate things
> if we are able to use the common PCMCIA code for trex and try to
> build a kernel with both that and amiga/pcmcia + apne.
Thanks, I had missed that one.
> At least it does sound like the io macros won't be an issue.
The arch/m68k/amiga/pcmcia.c API is different from that of the drivers
in drivers/pcmcia/ from what I've seen, so I think adding or reusing
trex support together with Amiga PCMCIA support will be an issue.
Cheers,
Michael
>
> Brad Boyer
> flar@allandria.com
>
next prev parent reply other threads:[~2021-06-05 22:05 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CAMuHMdUskb3oicq8Kbf6MY_4mn4-Y1pJ-om4fny7k48gndscgg@mail.gmail.com>
2021-06-02 5:21 ` [PATCH RFC 0/2] Fix m68k multiplatform ISA support Michael Schmitz
2021-06-02 5:21 ` [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari Michael Schmitz
2021-06-03 8:23 ` Finn Thain
2021-06-04 0:19 ` Michael Schmitz
2021-06-04 5:55 ` Finn Thain
2021-06-04 7:30 ` Michael Schmitz
2021-06-04 22:49 ` Brad Boyer
2021-06-05 1:41 ` Michael Schmitz
2021-06-05 6:04 ` Brad Boyer
2021-06-05 22:05 ` Michael Schmitz [this message]
2021-06-06 2:18 ` Michael Schmitz
2021-06-06 4:53 ` Finn Thain
2021-06-06 5:42 ` Michael Schmitz
2021-06-06 23:51 ` Brad Boyer
2021-06-06 5:54 ` [PATCH RFC 0/2] Add APNE PCMCIA 100 Mbit support Michael Schmitz
2021-06-06 5:54 ` [PATCH RFC 1/2] m68k: io_mm.h - add APNE 100 MBit support Michael Schmitz
2021-06-07 8:01 ` Geert Uytterhoeven
2021-06-07 8:20 ` Michael Schmitz
2021-06-07 11:15 ` Geert Uytterhoeven
2021-06-07 19:57 ` Michael Schmitz
2021-06-08 6:42 ` Geert Uytterhoeven
2021-06-08 21:55 ` Michael Schmitz
2021-06-09 6:33 ` Geert Uytterhoeven
2021-06-08 21:56 ` Michael Schmitz
2021-06-06 5:54 ` [PATCH RFC 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver Michael Schmitz
2021-06-07 8:08 ` Geert Uytterhoeven
2021-06-07 8:40 ` Michael Schmitz
2021-06-07 8:46 ` ALeX Kazik
2021-06-08 3:10 ` Michael Schmitz
2021-06-07 8:37 ` Geert Uytterhoeven
2021-06-07 12:56 ` Geert Uytterhoeven
2021-06-09 7:36 ` [PATCH v1 0/2] Add APNE PCMCIA 100 Mbit support Michael Schmitz
2021-06-09 7:36 ` [PATCH v1 1/2] m68k: io_mm.h - add APNE 100 MBit support Michael Schmitz
2021-06-09 8:04 ` Andreas Schwab
2021-06-09 21:54 ` Michael Schmitz
2021-06-10 1:09 ` Finn Thain
2021-06-10 7:32 ` Geert Uytterhoeven
2021-06-11 2:15 ` Michael Schmitz
2021-06-10 8:53 ` Andreas Schwab
2021-06-09 7:36 ` [PATCH v1 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver Michael Schmitz
2021-06-10 2:09 ` [PATCH v2 0/2] Add APNE PCMCIA 100 Mbit support Michael Schmitz
2021-06-10 2:09 ` [PATCH v2 1/2] m68k: io_mm.h - add APNE 100 MBit support Michael Schmitz
2021-06-10 2:09 ` [PATCH v2 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver Michael Schmitz
2021-06-16 21:11 ` [PATCH v2 0/2] Add APNE PCMCIA 100 Mbit support ALeX Kazik
2021-06-17 1:10 ` Michael Schmitz
2021-06-04 7:54 ` [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari Geert Uytterhoeven
2021-06-04 21:36 ` Michael Schmitz
2021-06-04 23:31 ` Finn Thain
2021-06-05 0:24 ` Finn Thain
2021-06-05 3:48 ` Michael Schmitz
2021-06-09 6:35 ` Geert Uytterhoeven
2021-06-09 7:20 ` Michael Schmitz
2021-06-02 5:21 ` [PATCH RFC 2/2] m68k: setup_mm.c: set isa_sex for Atari if ATARI_ROM_ISA not used Michael Schmitz
2021-06-02 7:09 ` Geert Uytterhoeven
2021-06-02 8:21 ` Michael Schmitz
2021-06-03 8:29 ` Finn Thain
2021-06-04 3:02 ` Michael Schmitz
2021-06-06 5:28 ` [PATCH] m68k: Fix multiplatform ISA support Michael Schmitz
2021-06-07 7:49 ` Geert Uytterhoeven
2021-06-07 8:17 ` Michael Schmitz
2021-06-09 7:22 ` [PATCH v2] m68k: io_mm.h: conditionalize ISA address translation on Atari Michael Schmitz
2021-06-09 7:57 ` Andreas Schwab
2021-06-09 21:43 ` Michael Schmitz
2021-06-10 2:04 ` [PATCH v3] " Michael Schmitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b5109814-ebc3-4cef-3377-32725e0056d0@gmail.com \
--to=schmitzmic@gmail.com \
--cc=flar@allandria.com \
--cc=fthain@linux-m68k.org \
--cc=geert@linux-m68k.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).