Linux-ide Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2] ata/pata_buddha: Probe via modalias instead of initcall
@ 2019-07-25 10:22 Max Staudt
       [not found] ` <CGME20190725170359eucas1p271187268f749869088f60bf961194169@eucas1p2.samsung.com>
  2019-07-29  8:53 ` Geert Uytterhoeven
  0 siblings, 2 replies; 7+ messages in thread
From: Max Staudt @ 2019-07-25 10:22 UTC (permalink / raw)
  To: linux-ide, linux-m68k; +Cc: linux-kernel, Max Staudt

Up until now, the pata_buddha driver would only check for cards on
initcall time. Now, the kernel will call its probe function as soon
as a compatible card is detected.

Device removal remains unimplemented. A WARN_ONCE() serves as a
reminder.

v2: Rename 'zdev' to 'z' to make the patch easy to analyse with
    git diff --ignore-space-change

Tested-by: Max Staudt <max@enpas.org>
Signed-off-by: Max Staudt <max@enpas.org>
---
 drivers/ata/pata_buddha.c | 240 ++++++++++++++++++++++++++++------------------
 1 file changed, 146 insertions(+), 94 deletions(-)

diff --git a/drivers/ata/pata_buddha.c b/drivers/ata/pata_buddha.c
index 11a8044ff..76804a4c1 100644
--- a/drivers/ata/pata_buddha.c
+++ b/drivers/ata/pata_buddha.c
@@ -19,6 +19,7 @@
 #include <linux/libata.h>
 #include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/types.h>
 #include <linux/zorro.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_host.h>
@@ -29,7 +30,7 @@
 #include <asm/setup.h>
 
 #define DRV_NAME "pata_buddha"
-#define DRV_VERSION "0.1.0"
+#define DRV_VERSION "0.1.1"
 
 #define BUDDHA_BASE1	0x800
 #define BUDDHA_BASE2	0xa00
@@ -47,11 +48,11 @@ enum {
 	BOARD_XSURF
 };
 
-static unsigned int buddha_bases[3] __initdata = {
+static unsigned int buddha_bases[3] = {
 	BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
 };
 
-static unsigned int xsurf_bases[2] __initdata = {
+static unsigned int xsurf_bases[2] = {
 	XSURF_BASE1, XSURF_BASE2
 };
 
@@ -145,111 +146,162 @@ static struct ata_port_operations pata_xsurf_ops = {
 	.set_mode	= pata_buddha_set_mode,
 };
 
-static int __init pata_buddha_init_one(void)
+static int pata_buddha_probe(struct zorro_dev *z,
+			     const struct zorro_device_id *ent)
 {
-	struct zorro_dev *z = NULL;
-
-	while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
-		static const char *board_name[]
-			= { "Buddha", "Catweasel", "X-Surf" };
-		struct ata_host *host;
-		void __iomem *buddha_board;
-		unsigned long board;
-		unsigned int type, nr_ports = 2;
-		int i;
-
-		if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
-			type = BOARD_BUDDHA;
-		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) {
-			type = BOARD_CATWEASEL;
-			nr_ports++;
-		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
-			type = BOARD_XSURF;
-		} else
-			continue;
-
-		dev_info(&z->dev, "%s IDE controller\n", board_name[type]);
-
-		board = z->resource.start;
+	static const char * const board_name[]
+		= { "Buddha", "Catweasel", "X-Surf" };
+	struct ata_host *host;
+	void __iomem *buddha_board;
+	unsigned long board;
+	unsigned int type, nr_ports = 2;
+	int i;
+
+	switch (z->id) {
+	case ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA:
+	default:
+		type = BOARD_BUDDHA;
+		break;
+	case ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL:
+		type = BOARD_CATWEASEL;
+		nr_ports++;
+		break;
+	case ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF:
+		type = BOARD_XSURF;
+		break;
+	}
+
+	dev_info(&z->dev, "%s IDE controller\n", board_name[type]);
+
+	board = z->resource.start;
+
+	if (type != BOARD_XSURF) {
+		if (!devm_request_mem_region(&z->dev,
+					     board + BUDDHA_BASE1,
+					     0x800, DRV_NAME))
+			return -ENXIO;
+	} else {
+		if (!devm_request_mem_region(&z->dev,
+					     board + XSURF_BASE1,
+					     0x1000, DRV_NAME))
+			return -ENXIO;
+		if (!devm_request_mem_region(&z->dev,
+					     board + XSURF_BASE2,
+					     0x1000, DRV_NAME)) {
+			devm_release_mem_region(&z->dev,
+						board + XSURF_BASE1,
+						0x1000);
+			return -ENXIO;
+		}
+	}
+
+	/* allocate host */
+	host = ata_host_alloc(&z->dev, nr_ports);
+	if (!host)
+		goto err_ata_host_alloc;
+
+	buddha_board = ZTWO_VADDR(board);
+
+	/* enable the board IRQ on Buddha/Catweasel */
+	if (type != BOARD_XSURF)
+		z_writeb(0, buddha_board + BUDDHA_IRQ_MR);
+
+	for (i = 0; i < nr_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+		void __iomem *base, *irqport;
+		unsigned long ctl = 0;
 
 		if (type != BOARD_XSURF) {
-			if (!devm_request_mem_region(&z->dev,
-						     board + BUDDHA_BASE1,
-						     0x800, DRV_NAME))
-				continue;
+			ap->ops = &pata_buddha_ops;
+			base = buddha_board + buddha_bases[i];
+			ctl = BUDDHA_CONTROL;
+			irqport = buddha_board + BUDDHA_IRQ + i * 0x40;
 		} else {
-			if (!devm_request_mem_region(&z->dev,
-						     board + XSURF_BASE1,
-						     0x1000, DRV_NAME))
-				continue;
-			if (!devm_request_mem_region(&z->dev,
-						     board + XSURF_BASE2,
-						     0x1000, DRV_NAME))
-				continue;
+			ap->ops = &pata_xsurf_ops;
+			base = buddha_board + xsurf_bases[i];
+			/* X-Surf has no CS1* (Control/AltStat) */
+			irqport = buddha_board + XSURF_IRQ;
 		}
 
-		/* allocate host */
-		host = ata_host_alloc(&z->dev, nr_ports);
-		if (!host)
-			continue;
-
-		buddha_board = ZTWO_VADDR(board);
-
-		/* enable the board IRQ on Buddha/Catweasel */
-		if (type != BOARD_XSURF)
-			z_writeb(0, buddha_board + BUDDHA_IRQ_MR);
-
-		for (i = 0; i < nr_ports; i++) {
-			struct ata_port *ap = host->ports[i];
-			void __iomem *base, *irqport;
-			unsigned long ctl = 0;
-
-			if (type != BOARD_XSURF) {
-				ap->ops = &pata_buddha_ops;
-				base = buddha_board + buddha_bases[i];
-				ctl = BUDDHA_CONTROL;
-				irqport = buddha_board + BUDDHA_IRQ + i * 0x40;
-			} else {
-				ap->ops = &pata_xsurf_ops;
-				base = buddha_board + xsurf_bases[i];
-				/* X-Surf has no CS1* (Control/AltStat) */
-				irqport = buddha_board + XSURF_IRQ;
-			}
-
-			ap->pio_mask = ATA_PIO4;
-			ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
-
-			ap->ioaddr.data_addr		= base;
-			ap->ioaddr.error_addr		= base + 2 + 1 * 4;
-			ap->ioaddr.feature_addr		= base + 2 + 1 * 4;
-			ap->ioaddr.nsect_addr		= base + 2 + 2 * 4;
-			ap->ioaddr.lbal_addr		= base + 2 + 3 * 4;
-			ap->ioaddr.lbam_addr		= base + 2 + 4 * 4;
-			ap->ioaddr.lbah_addr		= base + 2 + 5 * 4;
-			ap->ioaddr.device_addr		= base + 2 + 6 * 4;
-			ap->ioaddr.status_addr		= base + 2 + 7 * 4;
-			ap->ioaddr.command_addr		= base + 2 + 7 * 4;
-
-			if (ctl) {
-				ap->ioaddr.altstatus_addr = base + ctl;
-				ap->ioaddr.ctl_addr	  = base + ctl;
-			}
-
-			ap->private_data = (void *)irqport;
-
-			ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", board,
-				      ctl ? board + buddha_bases[i] + ctl : 0);
+		ap->pio_mask = ATA_PIO4;
+		ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
+
+		ap->ioaddr.data_addr		= base;
+		ap->ioaddr.error_addr		= base + 2 + 1 * 4;
+		ap->ioaddr.feature_addr		= base + 2 + 1 * 4;
+		ap->ioaddr.nsect_addr		= base + 2 + 2 * 4;
+		ap->ioaddr.lbal_addr		= base + 2 + 3 * 4;
+		ap->ioaddr.lbam_addr		= base + 2 + 4 * 4;
+		ap->ioaddr.lbah_addr		= base + 2 + 5 * 4;
+		ap->ioaddr.device_addr		= base + 2 + 6 * 4;
+		ap->ioaddr.status_addr		= base + 2 + 7 * 4;
+		ap->ioaddr.command_addr		= base + 2 + 7 * 4;
+
+		if (ctl) {
+			ap->ioaddr.altstatus_addr = base + ctl;
+			ap->ioaddr.ctl_addr	  = base + ctl;
 		}
 
-		ata_host_activate(host, IRQ_AMIGA_PORTS, ata_sff_interrupt,
-				  IRQF_SHARED, &pata_buddha_sht);
+		ap->private_data = (void *)irqport;
 
+		ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", board,
+			      ctl ? board + buddha_bases[i] + ctl : 0);
 	}
 
+	ata_host_activate(host, IRQ_AMIGA_PORTS, ata_sff_interrupt,
+			  IRQF_SHARED, &pata_buddha_sht);
+
+
 	return 0;
+
+err_ata_host_alloc:
+	switch (type) {
+	case BOARD_BUDDHA:
+	case BOARD_CATWEASEL:
+	default:
+		devm_release_mem_region(&z->dev,
+					board + BUDDHA_BASE1,
+					0x800);
+		break;
+	case BOARD_XSURF:
+		devm_release_mem_region(&z->dev,
+					board + XSURF_BASE1,
+					0x1000);
+		devm_release_mem_region(&z->dev,
+					board + XSURF_BASE2,
+					0x1000);
+		break;
+	}
+
+	return -ENXIO;
+}
+
+static void pata_buddha_remove(struct zorro_dev *zdev)
+{
+	/* NOT IMPLEMENTED */
+
+	WARN_ONCE(1, "pata_buddha: Attempted to remove driver. This is not implemented yet.\n");
 }
 
-module_init(pata_buddha_init_one);
+static const struct zorro_device_id pata_buddha_zorro_tbl[] = {
+	{ ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA, },
+	{ ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL, },
+	{ ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, },
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(zorro, pata_buddha_zorro_tbl);
+
+static struct zorro_driver pata_buddha_driver = {
+	.name           = "pata_buddha",
+	.id_table       = pata_buddha_zorro_tbl,
+	.probe          = pata_buddha_probe,
+	.remove         = pata_buddha_remove,
+};
+
+module_driver(pata_buddha_driver,
+	      zorro_register_driver,
+	      zorro_unregister_driver);
 
 MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
 MODULE_DESCRIPTION("low-level driver for Buddha/Catweasel/X-Surf PATA");
-- 
2.11.0


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v2] ata/pata_buddha: Probe via modalias instead of initcall
       [not found] ` <CGME20190725170359eucas1p271187268f749869088f60bf961194169@eucas1p2.samsung.com>
@ 2019-07-25 17:03   ` Bartlomiej Zolnierkiewicz
  2019-07-25 17:33     ` Max Staudt
  2019-07-25 18:01     ` John Paul Adrian Glaubitz
  0 siblings, 2 replies; 7+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2019-07-25 17:03 UTC (permalink / raw)
  To: Max Staudt
  Cc: linux-ide, linux-m68k, linux-kernel, John Paul Adrian Glaubitz,
	Michael Schmitz, Geert Uytterhoeven


Hi Max,

On 7/25/19 12:22 PM, Max Staudt wrote:
> Up until now, the pata_buddha driver would only check for cards on
> initcall time. Now, the kernel will call its probe function as soon
> as a compatible card is detected.
> 
> Device removal remains unimplemented. A WARN_ONCE() serves as a
> reminder.
> 
> v2: Rename 'zdev' to 'z' to make the patch easy to analyse with
>     git diff --ignore-space-change
> 
> Tested-by: Max Staudt <max@enpas.org>
> Signed-off-by: Max Staudt <max@enpas.org>
> ---
>  drivers/ata/pata_buddha.c | 240 ++++++++++++++++++++++++++++------------------
>  1 file changed, 146 insertions(+), 94 deletions(-)
> 
> diff --git a/drivers/ata/pata_buddha.c b/drivers/ata/pata_buddha.c
> index 11a8044ff..76804a4c1 100644
> --- a/drivers/ata/pata_buddha.c
> +++ b/drivers/ata/pata_buddha.c
> @@ -19,6 +19,7 @@
>  #include <linux/libata.h>
>  #include <linux/mm.h>
>  #include <linux/module.h>
> +#include <linux/types.h>
>  #include <linux/zorro.h>
>  #include <scsi/scsi_cmnd.h>
>  #include <scsi/scsi_host.h>
> @@ -29,7 +30,7 @@
>  #include <asm/setup.h>
>  
>  #define DRV_NAME "pata_buddha"
> -#define DRV_VERSION "0.1.0"
> +#define DRV_VERSION "0.1.1"
>  
>  #define BUDDHA_BASE1	0x800
>  #define BUDDHA_BASE2	0xa00
> @@ -47,11 +48,11 @@ enum {
>  	BOARD_XSURF
>  };
>  
> -static unsigned int buddha_bases[3] __initdata = {
> +static unsigned int buddha_bases[3] = {
>  	BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
>  };
>  
> -static unsigned int xsurf_bases[2] __initdata = {
> +static unsigned int xsurf_bases[2] = {
>  	XSURF_BASE1, XSURF_BASE2
>  };
>  
> @@ -145,111 +146,162 @@ static struct ata_port_operations pata_xsurf_ops = {
>  	.set_mode	= pata_buddha_set_mode,
>  };
>  
> -static int __init pata_buddha_init_one(void)
> +static int pata_buddha_probe(struct zorro_dev *z,
> +			     const struct zorro_device_id *ent)
>  {
> -	struct zorro_dev *z = NULL;
> -
> -	while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
> -		static const char *board_name[]
> -			= { "Buddha", "Catweasel", "X-Surf" };
> -		struct ata_host *host;
> -		void __iomem *buddha_board;
> -		unsigned long board;
> -		unsigned int type, nr_ports = 2;
> -		int i;
> -
> -		if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
> -			type = BOARD_BUDDHA;
> -		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) {
> -			type = BOARD_CATWEASEL;
> -			nr_ports++;
> -		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
> -			type = BOARD_XSURF;
> -		} else
> -			continue;
> -
> -		dev_info(&z->dev, "%s IDE controller\n", board_name[type]);
> -
> -		board = z->resource.start;
> +	static const char * const board_name[]
> +		= { "Buddha", "Catweasel", "X-Surf" };
> +	struct ata_host *host;
> +	void __iomem *buddha_board;
> +	unsigned long board;
> +	unsigned int type, nr_ports = 2;
> +	int i;
> +
> +	switch (z->id) {
> +	case ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA:
> +	default:
> +		type = BOARD_BUDDHA;
> +		break;
> +	case ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL:
> +		type = BOARD_CATWEASEL;
> +		nr_ports++;
> +		break;
> +	case ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF:
> +		type = BOARD_XSURF;
> +		break;
> +	}
> +
> +	dev_info(&z->dev, "%s IDE controller\n", board_name[type]);
> +
> +	board = z->resource.start;
> +
> +	if (type != BOARD_XSURF) {
> +		if (!devm_request_mem_region(&z->dev,
> +					     board + BUDDHA_BASE1,
> +					     0x800, DRV_NAME))
> +			return -ENXIO;
> +	} else {
> +		if (!devm_request_mem_region(&z->dev,
> +					     board + XSURF_BASE1,
> +					     0x1000, DRV_NAME))
> +			return -ENXIO;
> +		if (!devm_request_mem_region(&z->dev,
> +					     board + XSURF_BASE2,
> +					     0x1000, DRV_NAME)) {
> +			devm_release_mem_region(&z->dev,
> +						board + XSURF_BASE1,
> +						0x1000);
> +			return -ENXIO;
> +		}
> +	}
> +
> +	/* allocate host */
> +	host = ata_host_alloc(&z->dev, nr_ports);
> +	if (!host)
> +		goto err_ata_host_alloc;
> +
> +	buddha_board = ZTWO_VADDR(board);
> +
> +	/* enable the board IRQ on Buddha/Catweasel */
> +	if (type != BOARD_XSURF)
> +		z_writeb(0, buddha_board + BUDDHA_IRQ_MR);
> +
> +	for (i = 0; i < nr_ports; i++) {
> +		struct ata_port *ap = host->ports[i];
> +		void __iomem *base, *irqport;
> +		unsigned long ctl = 0;
>  
>  		if (type != BOARD_XSURF) {
> -			if (!devm_request_mem_region(&z->dev,
> -						     board + BUDDHA_BASE1,
> -						     0x800, DRV_NAME))
> -				continue;
> +			ap->ops = &pata_buddha_ops;
> +			base = buddha_board + buddha_bases[i];
> +			ctl = BUDDHA_CONTROL;
> +			irqport = buddha_board + BUDDHA_IRQ + i * 0x40;
>  		} else {
> -			if (!devm_request_mem_region(&z->dev,
> -						     board + XSURF_BASE1,
> -						     0x1000, DRV_NAME))
> -				continue;
> -			if (!devm_request_mem_region(&z->dev,
> -						     board + XSURF_BASE2,
> -						     0x1000, DRV_NAME))
> -				continue;
> +			ap->ops = &pata_xsurf_ops;
> +			base = buddha_board + xsurf_bases[i];
> +			/* X-Surf has no CS1* (Control/AltStat) */
> +			irqport = buddha_board + XSURF_IRQ;
>  		}
>  
> -		/* allocate host */
> -		host = ata_host_alloc(&z->dev, nr_ports);
> -		if (!host)
> -			continue;
> -
> -		buddha_board = ZTWO_VADDR(board);
> -
> -		/* enable the board IRQ on Buddha/Catweasel */
> -		if (type != BOARD_XSURF)
> -			z_writeb(0, buddha_board + BUDDHA_IRQ_MR);
> -
> -		for (i = 0; i < nr_ports; i++) {
> -			struct ata_port *ap = host->ports[i];
> -			void __iomem *base, *irqport;
> -			unsigned long ctl = 0;
> -
> -			if (type != BOARD_XSURF) {
> -				ap->ops = &pata_buddha_ops;
> -				base = buddha_board + buddha_bases[i];
> -				ctl = BUDDHA_CONTROL;
> -				irqport = buddha_board + BUDDHA_IRQ + i * 0x40;
> -			} else {
> -				ap->ops = &pata_xsurf_ops;
> -				base = buddha_board + xsurf_bases[i];
> -				/* X-Surf has no CS1* (Control/AltStat) */
> -				irqport = buddha_board + XSURF_IRQ;
> -			}
> -
> -			ap->pio_mask = ATA_PIO4;
> -			ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
> -
> -			ap->ioaddr.data_addr		= base;
> -			ap->ioaddr.error_addr		= base + 2 + 1 * 4;
> -			ap->ioaddr.feature_addr		= base + 2 + 1 * 4;
> -			ap->ioaddr.nsect_addr		= base + 2 + 2 * 4;
> -			ap->ioaddr.lbal_addr		= base + 2 + 3 * 4;
> -			ap->ioaddr.lbam_addr		= base + 2 + 4 * 4;
> -			ap->ioaddr.lbah_addr		= base + 2 + 5 * 4;
> -			ap->ioaddr.device_addr		= base + 2 + 6 * 4;
> -			ap->ioaddr.status_addr		= base + 2 + 7 * 4;
> -			ap->ioaddr.command_addr		= base + 2 + 7 * 4;
> -
> -			if (ctl) {
> -				ap->ioaddr.altstatus_addr = base + ctl;
> -				ap->ioaddr.ctl_addr	  = base + ctl;
> -			}
> -
> -			ap->private_data = (void *)irqport;
> -
> -			ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", board,
> -				      ctl ? board + buddha_bases[i] + ctl : 0);
> +		ap->pio_mask = ATA_PIO4;
> +		ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
> +
> +		ap->ioaddr.data_addr		= base;
> +		ap->ioaddr.error_addr		= base + 2 + 1 * 4;
> +		ap->ioaddr.feature_addr		= base + 2 + 1 * 4;
> +		ap->ioaddr.nsect_addr		= base + 2 + 2 * 4;
> +		ap->ioaddr.lbal_addr		= base + 2 + 3 * 4;
> +		ap->ioaddr.lbam_addr		= base + 2 + 4 * 4;
> +		ap->ioaddr.lbah_addr		= base + 2 + 5 * 4;
> +		ap->ioaddr.device_addr		= base + 2 + 6 * 4;
> +		ap->ioaddr.status_addr		= base + 2 + 7 * 4;
> +		ap->ioaddr.command_addr		= base + 2 + 7 * 4;
> +
> +		if (ctl) {
> +			ap->ioaddr.altstatus_addr = base + ctl;
> +			ap->ioaddr.ctl_addr	  = base + ctl;
>  		}
>  
> -		ata_host_activate(host, IRQ_AMIGA_PORTS, ata_sff_interrupt,
> -				  IRQF_SHARED, &pata_buddha_sht);
> +		ap->private_data = (void *)irqport;
>  
> +		ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", board,
> +			      ctl ? board + buddha_bases[i] + ctl : 0);
>  	}
>  
> +	ata_host_activate(host, IRQ_AMIGA_PORTS, ata_sff_interrupt,
> +			  IRQF_SHARED, &pata_buddha_sht);
> +
> +
>  	return 0;
> +
> +err_ata_host_alloc:
> +	switch (type) {
> +	case BOARD_BUDDHA:
> +	case BOARD_CATWEASEL:
> +	default:
> +		devm_release_mem_region(&z->dev,
> +					board + BUDDHA_BASE1,
> +					0x800);

Could you please explain why this is needed now?

[ The whole idea of using devm_* helpers is to not have to release
  resources explicitly. ]

> +		break;
> +	case BOARD_XSURF:
> +		devm_release_mem_region(&z->dev,
> +					board + XSURF_BASE1,
> +					0x1000);
> +		devm_release_mem_region(&z->dev,
> +					board + XSURF_BASE2,
> +					0x1000);
> +		break;
> +	}
> +
> +	return -ENXIO;
> +}
> +
> +static void pata_buddha_remove(struct zorro_dev *zdev)
> +{
> +	/* NOT IMPLEMENTED */
> +
> +	WARN_ONCE(1, "pata_buddha: Attempted to remove driver. This is not implemented yet.\n");

Please try to implement it, should be as simple as:

static void pata_buddha_remove(struct zorro_dev *zdev)
{
	struct ata_host *host = dev_get_drvdata(&zdev->dev);

	ata_host_detach(host);
}

[ ata_host_alloc() in pata_buddha_probe() sets drvdata to host ]

The rest of the patch looks fine, thanks for working on this driver.

>  }
>  
> -module_init(pata_buddha_init_one);
> +static const struct zorro_device_id pata_buddha_zorro_tbl[] = {
> +	{ ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA, },
> +	{ ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL, },
> +	{ ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, },
> +	{ 0 }
> +};
> +
> +MODULE_DEVICE_TABLE(zorro, pata_buddha_zorro_tbl);
> +
> +static struct zorro_driver pata_buddha_driver = {
> +	.name           = "pata_buddha",
> +	.id_table       = pata_buddha_zorro_tbl,
> +	.probe          = pata_buddha_probe,
> +	.remove         = pata_buddha_remove,
> +};
> +
> +module_driver(pata_buddha_driver,
> +	      zorro_register_driver,
> +	      zorro_unregister_driver);
>  
>  MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
>  MODULE_DESCRIPTION("low-level driver for Buddha/Catweasel/X-Surf PATA");

PS Next time please also use scripts/get_maintainer.pl script to get
   the list of people that should be added to Cc:, i.e.:

$ ./scripts/get_maintainer.pl -f drivers/ata/pata_buddha.c
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> (maintainer:LIBATA PATA DRIVERS)
Jens Axboe <axboe@kernel.dk> (maintainer:LIBATA PATA DRIVERS)
linux-ide@vger.kernel.org (open list:LIBATA PATA DRIVERS)
linux-kernel@vger.kernel.org (open list)

[ I've also added John, Michael & Geert to Cc: (as they were all
  involved in the development of the initial driver version). ]

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v2] ata/pata_buddha: Probe via modalias instead of initcall
  2019-07-25 17:03   ` Bartlomiej Zolnierkiewicz
@ 2019-07-25 17:33     ` Max Staudt
  2019-07-25 17:59       ` Max Staudt
  2019-07-25 18:01     ` John Paul Adrian Glaubitz
  1 sibling, 1 reply; 7+ messages in thread
From: Max Staudt @ 2019-07-25 17:33 UTC (permalink / raw)
  To: Bartlomiej Zolnierkiewicz
  Cc: linux-ide, linux-m68k, linux-kernel, John Paul Adrian Glaubitz,
	Michael Schmitz, Geert Uytterhoeven

On 07/25/2019 07:03 PM, Bartlomiej Zolnierkiewicz wrote:
>> +err_ata_host_alloc:
>> +	switch (type) {
>> +	case BOARD_BUDDHA:
>> +	case BOARD_CATWEASEL:
>> +	default:
>> +		devm_release_mem_region(&z->dev,
>> +					board + BUDDHA_BASE1,
>> +					0x800);
> 
> Could you please explain why this is needed now?
> 
> [ The whole idea of using devm_* helpers is to not have to release
>   resources explicitly. ]

My mistake. Thanks, I'll fix it.


>> +static void pata_buddha_remove(struct zorro_dev *zdev)
>> +{
>> +	/* NOT IMPLEMENTED */
>> +
>> +	WARN_ONCE(1, "pata_buddha: Attempted to remove driver. This is not implemented yet.\n");
> 
> Please try to implement it, should be as simple as:
> 
> static void pata_buddha_remove(struct zorro_dev *zdev)
> {
> 	struct ata_host *host = dev_get_drvdata(&zdev->dev);
> 
> 	ata_host_detach(host);
> }
> 
> [ ata_host_alloc() in pata_buddha_probe() sets drvdata to host ]

Seeing as the driver is almost 1:1 the same as pata_gayle, I see no reason against this.

Do you need me to test module removal on the real machine, or is it okay to take your suggestion as-is, given that it is already accepted in pata_gayle?


> The rest of the patch looks fine, thanks for working on this driver.

Thanks for reviewing it, and thanks for porting buddha to libata!


> PS Next time please also use scripts/get_maintainer.pl script to get
>    the list of people that should be added to Cc:, i.e.:
> 
> $ ./scripts/get_maintainer.pl -f drivers/ata/pata_buddha.c
> Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> (maintainer:LIBATA PATA DRIVERS)
> Jens Axboe <axboe@kernel.dk> (maintainer:LIBATA PATA DRIVERS)
> linux-ide@vger.kernel.org (open list:LIBATA PATA DRIVERS)
> linux-kernel@vger.kernel.org (open list)
> 
> [ I've also added John, Michael & Geert to Cc: (as they were all
>   involved in the development of the initial driver version). ]

Oops, thanks for fixing this.


Max

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v2] ata/pata_buddha: Probe via modalias instead of initcall
  2019-07-25 17:33     ` Max Staudt
@ 2019-07-25 17:59       ` Max Staudt
  0 siblings, 0 replies; 7+ messages in thread
From: Max Staudt @ 2019-07-25 17:59 UTC (permalink / raw)
  To: Bartlomiej Zolnierkiewicz
  Cc: linux-ide, linux-m68k, linux-kernel, John Paul Adrian Glaubitz,
	Michael Schmitz, Geert Uytterhoeven

On 07/25/2019 07:33 PM, Max Staudt wrote:
> On 07/25/2019 07:03 PM, Bartlomiej Zolnierkiewicz wrote:
>> Please try to implement it, should be as simple as:
>>
>> static void pata_buddha_remove(struct zorro_dev *zdev)
>> {
>> 	struct ata_host *host = dev_get_drvdata(&zdev->dev);
>>
>> 	ata_host_detach(host);
>> }
>>
>> [ ata_host_alloc() in pata_buddha_probe() sets drvdata to host ]
> 
> Seeing as the driver is almost 1:1 the same as pata_gayle, I see no reason against this.
> 
> Do you need me to test module removal on the real machine, or is it okay to take your suggestion as-is, given that it is already accepted in pata_gayle?

Nevermind, I found a way to test it somewhat quickly. I can confirm that it works. Thanks for your suggestion!


Max

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v2] ata/pata_buddha: Probe via modalias instead of initcall
  2019-07-25 17:03   ` Bartlomiej Zolnierkiewicz
  2019-07-25 17:33     ` Max Staudt
@ 2019-07-25 18:01     ` John Paul Adrian Glaubitz
  1 sibling, 0 replies; 7+ messages in thread
From: John Paul Adrian Glaubitz @ 2019-07-25 18:01 UTC (permalink / raw)
  To: Bartlomiej Zolnierkiewicz, Max Staudt
  Cc: linux-ide, linux-m68k, linux-kernel, Michael Schmitz, Geert Uytterhoeven

Hi Bartlomiej!

On 7/25/19 7:03 PM, Bartlomiej Zolnierkiewicz wrote:
> [ I've also added John, Michael & Geert to Cc: (as they were all
>   involved in the development of the initial driver version). ]

Thanks a lot for your review, much appreciated!

FWIW, me, Michael and Geert are all on the linux-m68k list, so we are already
in the loop. I also happened to talk with Max before regarding the driver!

We can test the driver on the test Amiga 4000 we have again which has
a Buddha controller installed. Usually Michael builds the kernel for
used for testing, but in case he's not around I can do that, too.

Thanks,
Adrian

-- 
 .''`.  John Paul Adrian Glaubitz
: :' :  Debian Developer - glaubitz@debian.org
`. `'   Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
  `-    GPG: 62FF 8A75 84E0 2956 9546  0006 7426 3B37 F5B5 F913

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v2] ata/pata_buddha: Probe via modalias instead of initcall
  2019-07-25 10:22 [PATCH v2] ata/pata_buddha: Probe via modalias instead of initcall Max Staudt
       [not found] ` <CGME20190725170359eucas1p271187268f749869088f60bf961194169@eucas1p2.samsung.com>
@ 2019-07-29  8:53 ` Geert Uytterhoeven
  2019-07-29 10:49   ` Max
  1 sibling, 1 reply; 7+ messages in thread
From: Geert Uytterhoeven @ 2019-07-29  8:53 UTC (permalink / raw)
  To: Max Staudt; +Cc: linux-ide, Linux/m68k, Linux Kernel Mailing List

Hi Max,

On Thu, Jul 25, 2019 at 3:25 PM Max Staudt <max@enpas.org> wrote:
> Up until now, the pata_buddha driver would only check for cards on
> initcall time. Now, the kernel will call its probe function as soon
> as a compatible card is detected.
>
> Device removal remains unimplemented. A WARN_ONCE() serves as a
> reminder.
>
> v2: Rename 'zdev' to 'z' to make the patch easy to analyse with
>     git diff --ignore-space-change
>
> Tested-by: Max Staudt <max@enpas.org>
> Signed-off-by: Max Staudt <max@enpas.org>

Thanks for your patch!

> --- a/drivers/ata/pata_buddha.c
> +++ b/drivers/ata/pata_buddha.c

> @@ -145,111 +146,162 @@ static struct ata_port_operations pata_xsurf_ops = {
>         .set_mode       = pata_buddha_set_mode,
>  };
>
> -static int __init pata_buddha_init_one(void)
> +static int pata_buddha_probe(struct zorro_dev *z,
> +                            const struct zorro_device_id *ent)
>  {

[...]

> +       switch (z->id) {
> +       case ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA:
> +       default:
> +               type = BOARD_BUDDHA;
> +               break;
> +       case ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL:
> +               type = BOARD_CATWEASEL;
> +               nr_ports++;
> +               break;
> +       case ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF:
> +               type = BOARD_XSURF;
> +               break;
> +       }

Please obtain the type from ent->driver_data instead of using a switch()
statement...

> -module_init(pata_buddha_init_one);
> +static const struct zorro_device_id pata_buddha_zorro_tbl[] = {
> +       { ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA, },
> +       { ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL, },
> +       { ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, },

... after storing it in zorro_device_id.driver_data here.

> +       { 0 }
> +};

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v2] ata/pata_buddha: Probe via modalias instead of initcall
  2019-07-29  8:53 ` Geert Uytterhoeven
@ 2019-07-29 10:49   ` Max
  0 siblings, 0 replies; 7+ messages in thread
From: Max @ 2019-07-29 10:49 UTC (permalink / raw)
  To: Geert Uytterhoeven; +Cc: linux-ide, Linux/m68k, Linux Kernel Mailing List

On 07/29/2019 10:53 AM, Geert Uytterhoeven wrote:
>> +       switch (z->id) {
>> +       case ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA:
>> +       default:
>> +               type = BOARD_BUDDHA;
>> +               break;
>> +       case ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL:
>> +               type = BOARD_CATWEASEL;
>> +               nr_ports++;
>> +               break;
>> +       case ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF:
>> +               type = BOARD_XSURF;
>> +               break;
>> +       }
> 
> Please obtain the type from ent->driver_data instead of using a switch()
> statement...
> 
>> -module_init(pata_buddha_init_one);
>> +static const struct zorro_device_id pata_buddha_zorro_tbl[] = {
>> +       { ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA, },
>> +       { ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL, },
>> +       { ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, },
> 
> ... after storing it in zorro_device_id.driver_data here.


Thanks Geert for your feedback, this is a good idea. I'll make this change.


Max

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, back to index

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-25 10:22 [PATCH v2] ata/pata_buddha: Probe via modalias instead of initcall Max Staudt
     [not found] ` <CGME20190725170359eucas1p271187268f749869088f60bf961194169@eucas1p2.samsung.com>
2019-07-25 17:03   ` Bartlomiej Zolnierkiewicz
2019-07-25 17:33     ` Max Staudt
2019-07-25 17:59       ` Max Staudt
2019-07-25 18:01     ` John Paul Adrian Glaubitz
2019-07-29  8:53 ` Geert Uytterhoeven
2019-07-29 10:49   ` Max

Linux-ide Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-ide/0 linux-ide/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-ide linux-ide/ https://lore.kernel.org/linux-ide \
		linux-ide@vger.kernel.org linux-ide@archiver.kernel.org
	public-inbox-index linux-ide


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-ide


AGPL code for this site: git clone https://public-inbox.org/ public-inbox