Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
[PATCH v3 1/4] iio: adc: ad7606: Add support for AD7606B ADC
 2019-08-25 15:15 UTC  (6+ messages) - mbox.gz / Atom
` [PATCH v3 2/4] MAINTAINERS: Add Beniamin Bia for AD7606 driver
` [PATCH v3 3/4] dt-bindings: iio: adc: Migrate AD7606 documentation to yaml
` [PATCH v3 4/4] dt-bindings: iio: adc: Add AD7606B ADC documentation

[PATCH v2 0/1] counter: cros_ec: Add sync sensor driver
 2019-08-24 19:48 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH v2 1/1] counter: cros_ec: Add synchronization sensor

buffer read
 2019-08-23 20:51 UTC  (3+ messages) - mbox.gz / Atom

[RFC 1/9] dt-bindings: arm: samsung: Convert Samsung board/soc bindings to json-schema
 2019-08-23 14:53 UTC  (9+ messages) - mbox.gz / Atom
` [RFC 2/9] dt-bindings: arm: samsung: Document missing S5Pv210 boards bindings
` [RFC 3/9] dt-bindings: arm: samsung: Document missing Exynos7 "
` [RFC 4/9] dt-bindings: arm: samsung: Convert Exynos Chipid bindings to json-schema
` [RFC 5/9] dt-bindings: arm: samsung: Convert Exynos PMU "
` [RFC 6/9] dt-bindings: arm: samsung: Convert Exynos System Registers "
` [RFC 7/9] dt-bindings: rtc: s3c: Convert S3C/Exynos RTC "
` [RFC 8/9] dt-bindings: iio: adc: exynos: Convert Exynos ADC "
` [RFC 9/9] ARM: dts: exynos: Remove not accurate secondary ADC compatible

[PATCH -next] iio: st_sensors: Fix build error
 2019-08-23 12:18 UTC  - mbox.gz / Atom

[PATCH 0/8 v2] AB8500 GPADC MFD to IIO conversion
 2019-08-22 14:52 UTC  (9+ messages) - mbox.gz / Atom
` [PATCH 1/8 v2] power: supply: ab8500_btemp: convert to IIO ADC
` [PATCH 2/8 v2] power: supply: ab8500_charger: "
` [PATCH 3/8 v2] power: supply: ab8500_fg: "
` [PATCH 4/8 v2] hwmon: ab8500: "
` [PATCH 5/8 v2] mfd: ab8500: augment DT bindings
` [PATCH 6/8 v2] iio: adc: New driver for the AB8500 GPADC
` [PATCH 7/8 v2] mfd: Switch the AB8500 GPADC to IIO
` [PATCH 8/8 v2] ARM: dts: ux500: declare GPADC IIO ADC channels

[PATCH] iio: imu: st_lsm6dsx: Fix FIFO diff mask for tagged fifo
 2019-08-22 13:22 UTC  - mbox.gz / Atom

[PATCH] iio: potentiometer: max5432: update the non-volatile position
 2019-08-22  8:36 UTC  (6+ messages) - mbox.gz / Atom
` iio: Is storing output values to non volatile registers something we should do automatically or leave to userspace action. [was Re: [PATCH] iio: potentiometer: max5432: update the non-volatile position]

[PATCH v2 1/1] iio: core: Fix fractional format generation
 2019-08-22  6:06 UTC  - mbox.gz / Atom

[PATCH v2 0/5] counter: new TI eQEP driver
 2019-08-21 20:31 UTC  (11+ messages) - mbox.gz / Atom
` [PATCH v2 1/5] bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystem
` [PATCH v2 2/5] dt-bindings: counter: new bindings for TI eQEP
` [PATCH v2 3/5] counter: new TI eQEP driver
` [PATCH v2 4/5] ARM: dts: am33xx: Add nodes for eQEP
` [PATCH v2 5/5] ARM: dts: am335x-boneblue: Enable eQEP

[PATCH v2 1/4] iio: adc: ad7606: Add support for AD7606B ADC
 2019-08-21 20:25 UTC  (8+ messages) - mbox.gz / Atom
` [PATCH v2 3/4] dt-bindings: iio: adc: Migrate AD7606 documentation to yaml
` [PATCH v2 4/4] dt-bindings: iio: adc: Add AD7606B ADC documentation

[PATCH 1/1] iio: core: Fix fractional format generation
 2019-08-21 20:09 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v5 0/4] iio: imu: st_lsm6dsx: Add support for LSM9DS1
 2019-08-21 13:25 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH v5 1/4] iio: imu: st_lsm6dsx: introduce update_fifo function pointer
` [PATCH v5 2/4] iio: imu: st_lsm6sdx: move register definitions to sensor_settings struct
` [PATCH v5 3/4] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
` [PATCH v5 4/4] dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings

[PATCH] iio: adc: max9611: Fix temperature reading in probe
 2019-08-21 12:34 UTC  (6+ messages) - mbox.gz / Atom

[PATCH v2 1/6] iio: imu: st_lsm6dsx: move interrupt thread to core
 2019-08-21 11:11 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH v2 3/6] iio: imu: st_lsm6dsx: add motion events

[PATCH 0/4] iio: adc: ina2xx: Improve device identification
 2019-08-21  9:12 UTC  (9+ messages) - mbox.gz / Atom
` [PATCH 1/4] iio: adc: ina2xx: Define *device_node only once
` [PATCH 2/4] iio: adc: ina2xx: Setup better name then simple ina2xx
` [PATCH 4/4] iio: adc: ina2xx: Use label proper for device identification

[PATCH v4 0/3] iio: imu: st_lsm6dsx: Add support for LSM9DS1
 2019-08-21  9:08 UTC  (9+ messages) - mbox.gz / Atom
` [PATCH v4 1/3] iio: imu: st_lsm6sdx: move register definitions to sensor_settings struct
` [PATCH v4 2/3] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
` [PATCH v4 3/3] dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings

read buffer
 2019-08-21  1:10 UTC  (2+ messages) - mbox.gz / Atom

[PATCH AUTOSEL 4.14 02/12] iio: adc: max9611: Fix temperature reading in probe
 2019-08-20 13:42 UTC  - mbox.gz / Atom

[PATCH AUTOSEL 4.19 13/27] iio: adc: max9611: Fix temperature reading in probe
 2019-08-20 13:41 UTC  - mbox.gz / Atom

[PATCH AUTOSEL 5.2 20/44] iio: adc: max9611: Fix temperature reading in probe
 2019-08-20 13:40 UTC  - mbox.gz / Atom

[PATCH] iio: cros_ec: set calibscale for 3d MEMS to unit vector
 2019-08-20  5:10 UTC  - mbox.gz / Atom

[PATCH v2] dt-bindings: iio: light: isl29501: Rename bindings documentation file
 2019-08-19 14:17 UTC  - mbox.gz / Atom

[PATCH] dt-bindings: iio: light: isl29501: Rename bindings documentation file
 2019-08-19 14:15 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] iio: imu: st_lsm6dsx: introduce update_fifo function pointer
 2019-08-19 11:33 UTC  (3+ messages) - mbox.gz / Atom

[PATCH 0/2] irq/irq_sim: try to improve the API
 2019-08-19  8:18 UTC  (7+ messages) - mbox.gz / Atom
` [PATCH 1/2] irq/irq_sim: make the irq_sim structure opaque
` [PATCH 2/2] irq/irq_sim: use irq domain

[PATCH] Kconfig: Fix the reference to the RFD77402 ToF sensor in the 'help' section
 2019-08-19  4:48 UTC  - mbox.gz / Atom

[PATCH v1] iio: hid-sensor-attributes: Convert to use int_pow()
 2019-08-19  2:48 UTC  (5+ messages) - mbox.gz / Atom

[PATCH] iio: adc: sc27xx: Change to polling mode to read data
 2019-08-19  1:12 UTC  (9+ messages) - mbox.gz / Atom

[PATCH] tools: iio: add .gitignore
 2019-08-18 19:47 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v2] iio: adc: max1027: Use device-managed APIs
 2019-08-18 19:18 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v2] staging: iio: accel: adis16240: Improve readability on write_raw function
 2019-08-18 19:13 UTC  (3+ messages) - mbox.gz / Atom

[PATCH V3 1/4] staging: iio: adc: ad7192: Add low_pass_3db_filter_frequency
 2019-08-18 19:07 UTC  (10+ messages) - mbox.gz / Atom
` [PATCH V3 2/4] iio: adc: ad_sigma_delta: Export ad_sd_calibrate
` [PATCH V3 3/4] staging: iio: adc: ad7192: Add system calibration support
` [PATCH V3 4/4] dt-bindings: iio: adc: ad7192: Add binding documentation for AD7192

[PATCH] staging: iio: adc: ad7192: Remove platform data
 2019-08-18 18:23 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] iio: dac: ad5380: fix incorrect assignment to val
 2019-08-18 17:55 UTC  (3+ messages) - mbox.gz / Atom

[PATCH] iio: imu: adis16460: fix variable signedness
 2019-08-18 17:54 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] iio: accel: kxcjk1013: Improve comments on KIOX010A and KIOX020A ACPI ids
 2019-08-18 17:51 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] iio: max5481: use devres for iio device registration
 2019-08-18 17:18 UTC  (2+ messages) - mbox.gz / Atom

[PATCH][iio-next] iio: light: noa1305: fix missing break in a switch statement
 2019-08-18 17:14 UTC  (2+ messages) - mbox.gz / Atom

[PATCH 00/14] iio: SPDX headers for core + non device driver parts
 2019-08-17 20:38 UTC  (6+ messages) - mbox.gz / Atom
` [PATCH 13/14] iio: trig-loop: SPDX headers GPL-v2

static analysis bug report in drivers/staging/iio/dac/ad5380.c
 2019-08-15 11:40 UTC  (2+ messages) - mbox.gz / Atom

[bug report] iio: imu: Add support for the ADIS16460 IMU
 2019-08-15  8:59 UTC  - mbox.gz / Atom

[PATCH] iio: max5487: use devres for iio device registration
 2019-08-14  9:22 UTC  - mbox.gz / Atom

[PATCH] staging:iio:meter add driver for ADE9000
 2019-08-14  8:20 UTC  - mbox.gz / Atom

[PATCH AUTOSEL 4.14 01/44] iio: adc: max9611: Fix misuse of GENMASK macro
 2019-08-14  2:17 UTC  - mbox.gz / Atom

[PATCH AUTOSEL 4.19 01/68] iio: adc: max9611: Fix misuse of GENMASK macro
 2019-08-14  2:14 UTC  (2+ messages) - mbox.gz / Atom
` [PATCH AUTOSEL 4.19 02/68] iio: cros_ec_accel_legacy: Fix incorrect channel setting

[PATCH AUTOSEL 5.2 007/123] iio: adc: max9611: Fix misuse of GENMASK macro
 2019-08-14  2:08 UTC  (4+ messages) - mbox.gz / Atom
` [PATCH AUTOSEL 5.2 008/123] IIO: Ingenic JZ47xx: Set clock divider on probe
` [PATCH AUTOSEL 5.2 009/123] iio: cros_ec_accel_legacy: Fix incorrect channel setting
` [PATCH AUTOSEL 5.2 010/123] iio: imu: mpu6050: add missing available scan masks

[PATCH V2 1/4] staging: iio: adc: ad7192: Add low_pass_3db_filter_frequency
 2019-08-13 21:34 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH V2 2/4] iio: adc: ad_sigma_delta: Export ad_sd_calibrate
` [PATCH V2 3/4] staging: iio: adc: ad7192: Add system calibration support
` [PATCH V2 4/4] dt-bindings: iio: adc: ad7192: Add binding documentation for AD7192

[PATCH] iio:light:noa1305: Fix missing break statement
 2019-08-13 17:25 UTC  (3+ messages) - mbox.gz / Atom

[PULL] First set of new device support, cleanups and features for IIO in the 5.4 cycle
 2019-08-13 13:56 UTC  (5+ messages) - mbox.gz / Atom

[PATCH] MAINTAINERS: ftm-quaddec: Fix typo in a filepath
 2019-08-13  9:26 UTC  (2+ messages) - mbox.gz / Atom

Add ADE9000 driver to staging:iio:meter?
 2019-08-13  9:25 UTC  - mbox.gz / Atom

[PATCH v4 0/3] Add PAT9125 optical tracker driver
 2019-08-12 22:46 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH v4 1/3] dt-bindings: Add pixart vendor

[PULL] Second set of IIO fixes for the 5.3 cycle
 2019-08-12 20:48 UTC  (2+ messages) - mbox.gz / Atom

[PATCH 1/4] staging: iio: adc: ad7192: Add low_pass_3db_filter_frequency
 2019-08-12 19:07 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH 2/4] iio: adc: ad_sigma_delta: Export ad_sd_calibrate
` [PATCH 3/4] staging: iio: adc: ad7192: Add system calibration support
` [PATCH 4/4] dt-bindings: iio: adc: ad7192: Add binding documentation for AD7192

ina226 as IIO device instead of HWMON
 2019-08-12 11:28 UTC  (5+ messages) - mbox.gz / Atom

[PATCH] staging: iio: accel: adis16240: Improve readability on write_raw function
 2019-08-12  8:57 UTC  (4+ messages) - mbox.gz / Atom

[PATCH] iio: adc: max1027: Use device-managed APIs
 2019-08-11 10:15 UTC  - mbox.gz / Atom

[PATCH] iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position
 2019-08-11  9:28 UTC  (3+ messages) - mbox.gz / Atom

[PATCH] iio: hi8435: Drop hi8435_remove()
 2019-08-11  9:00 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] iio: hi8435: Use gpiod_set_value_cansleep()
 2019-08-11  8:50 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] iio: chemical: bme680: Fix pressure and humidity ABI mismatch
 2019-08-11  8:32 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] iio:st_sensors: remove buffer allocation at each buffer enable
 2019-08-11  8:26 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] counter: fix devm_platform_ioremap_resource.cocci warnings
 2019-08-09  9:41 UTC  - mbox.gz / Atom

[PATCH] media: uvcvideo: Add boottime clock support
 2019-08-07 13:38 UTC  (11+ messages) - mbox.gz / Atom

page: 

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org linux-iio@archiver.kernel.org
	public-inbox-index linux-iio


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/ public-inbox