From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.9 required=3.0 tests=DKIMWL_WL_MED,DKIM_SIGNED, DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 1A1C9C5CFFE for ; Mon, 10 Dec 2018 11:04:22 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id A0C6420821 for ; Mon, 10 Dec 2018 11:04:21 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=analog.onmicrosoft.com header.i=@analog.onmicrosoft.com header.b="Poa9hvGu" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org A0C6420821 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=analog.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-iio-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727324AbeLJLEV (ORCPT ); Mon, 10 Dec 2018 06:04:21 -0500 Received: from mail-eopbgr720075.outbound.protection.outlook.com ([40.107.72.75]:46000 "EHLO NAM05-CO1-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1727263AbeLJLEU (ORCPT ); Mon, 10 Dec 2018 06:04:20 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=analog.onmicrosoft.com; s=selector1-analog-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=Bmjymxuf8luyyUqobuPM008YU737Oq2Tov7g6JlzhNw=; b=Poa9hvGuQDh+9YxMImWAknRvuZqlNcGq35OqopwrJeuWI56V+tEjLHV2aug6LMv7SV2Ji7/gnHRVJGoz0nZ00/LG2jzlW6zqf7F0oGDGgqnYSVOFaRwztOHsyXO2Ve9jrWepVjML76clz23jD36UEoHy3Vafb2CrNM5pnXS++QA= Received: from CY1PR03CA0006.namprd03.prod.outlook.com (2603:10b6:600::16) by CO2PR03MB2264.namprd03.prod.outlook.com (2603:10b6:102:a::17) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.1404.19; Mon, 10 Dec 2018 11:03:52 +0000 Received: from BN1BFFO11FD007.protection.gbl (2a01:111:f400:7c10::1:162) by CY1PR03CA0006.outlook.office365.com (2603:10b6:600::16) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384) id 15.20.1404.19 via Frontend Transport; Mon, 10 Dec 2018 11:03:52 +0000 Authentication-Results: spf=pass (sender IP is 137.71.25.55) smtp.mailfrom=analog.com; gmx.de; dkim=none (message not signed) header.d=none;gmx.de; dmarc=bestguesspass action=none header.from=analog.com; Received-SPF: Pass (protection.outlook.com: domain of analog.com designates 137.71.25.55 as permitted sender) receiver=protection.outlook.com; client-ip=137.71.25.55; helo=nwd2mta1.analog.com; Received: from nwd2mta1.analog.com (137.71.25.55) by BN1BFFO11FD007.mail.protection.outlook.com (10.58.144.70) with Microsoft SMTP Server (version=TLS1_0, cipher=TLS_RSA_WITH_AES_256_CBC_SHA) id 15.20.1404.13 via Frontend Transport; Mon, 10 Dec 2018 11:03:52 +0000 Received: from NWD2HUBCAS7.ad.analog.com (nwd2hubcas7.ad.analog.com [10.64.69.107]) by nwd2mta1.analog.com (8.13.8/8.13.8) with ESMTP id wBAB3p73020233 (version=TLSv1/SSLv3 cipher=AES256-SHA bits=256 verify=OK); Mon, 10 Dec 2018 03:03:51 -0800 Received: from linux.ad.analog.com (10.32.224.122) by NWD2HUBCAS7.ad.analog.com (10.64.69.107) with Microsoft SMTP Server id 14.3.408.0; Mon, 10 Dec 2018 06:03:49 -0500 From: Stefan Popa To: CC: , , , , , , , , Subject: [PATCH v4 1/2] staging: iio: ad7606: Move out of staging Date: Mon, 10 Dec 2018 13:03:33 +0200 Message-ID: <1544439813-22858-1-git-send-email-stefan.popa@analog.com> X-Mailer: git-send-email 2.7.4 MIME-Version: 1.0 Content-Type: text/plain X-ADIRoutedOnPrem: True X-EOPAttributedMessage: 0 X-MS-Office365-Filtering-HT: Tenant X-Forefront-Antispam-Report: CIP:137.71.25.55;IPV:NLI;CTRY:US;EFV:NLI;SFV:NSPM;SFS:(10009020)(376002)(346002)(39860400002)(396003)(136003)(2980300002)(3190300001)(189003)(199004)(51416003)(54906003)(8936002)(966005)(77096007)(26005)(53946003)(47776003)(106002)(50226002)(186003)(14444005)(6306002)(6666004)(575784001)(356004)(4744004)(8676002)(16586007)(316002)(305945005)(5660300001)(246002)(36756003)(6916009)(336012)(48376002)(7636002)(2906002)(486006)(2616005)(116002)(476003)(126002)(107886003)(426003)(44832011)(106466001)(4326008)(478600001)(7696005)(72206003)(50466002)(2351001)(559001)(579004);DIR:OUT;SFP:1101;SCL:1;SRVR:CO2PR03MB2264;H:nwd2mta1.analog.com;FPR:;SPF:Pass;LANG:en;PTR:nwd2mail10.analog.com;MX:1;A:1; X-Microsoft-Exchange-Diagnostics: 1;BN1BFFO11FD007;1:zhx1jr7+C6QKil1VJ0L8n7PzRQxUyceKS+lif+LqUHlxgnhb6fbwzQbmEcXxCoUTsV6l9rfqN9YCBfr+59dPlLcu2t4vjOzTOHIKAEHu+t3xGZaQUNOAWuXmwHRXgR6F X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: cb65f774-5a5b-420a-4203-08d65e8f2b6f X-Microsoft-Antispam: BCL:0;PCL:0;RULEID:(2390098)(7020095)(4652040)(8989299)(4534185)(4627221)(201703031133081)(201702281549075)(8990200)(5600074)(711020)(4608076)(2017052603328)(7153060);SRVR:CO2PR03MB2264; X-Microsoft-Exchange-Diagnostics: 1;CO2PR03MB2264;3:na8uMQIympq1ZBOQtpLvHVGicCRuoUJbpJy+R8AtAjQ9YpauM2lzCPOp1HaKnpqkcM6j8t+bWWBNxvjWGWFLZw3De+8CS4byN6hJM8Ety0R1yRy4ED0bzrZDM7qr/Uee5Bp7YQx2qGeSF9K9C/k2CoHMQtRseAAn65wy9WIXTlRMb2wzVzVLku18GeT3YsS4cvx7xRqjr2cSmRvVS7UHB4tk6DIzKcIgpVxQEUIDzF24h+x+ScPlakXEpolZQfT9BnEH63T0IQsXq1LodVjz3OLDKVbnhcb9QcLTGk7Lv0GsmakYvbvf0j6w8d1Bcjgn7sSYGbgPa0VarTTXKyK8iEgF12WZimabMYMRB4hpBts=;25:Va2BnTWmyeuynbjk9AVjpsBixiOd777GFPdp5fdQ1UAVjtE3AeQREJ7kaxLf5RzCOuiGHZukvGbWOlKa4nJ4Hk3O/sGtNn8wX8lHBTSk2h1FDm4juP0RgWDkxmVBJ7mb5HnzAiB5dw/zMkRr8G8ckAABPn8Ah80Yc93dbVK0IahO1/1FV1NWnd6wl7VInhB/nkrERh1LBGxizeipKCo1wYrjgQTAXdoRQ2r99/cj4OH365YQqDaPhHuxi7dZ2GSr0JjbxptHpnQo07nYEhvgDrN+HP5cFCq92fQZZYt4O2NHhW5RxRdEGjcKuyE/z/SEfE4ex2q2hlN628FI0eqcoA== X-MS-TrafficTypeDiagnostic: CO2PR03MB2264: X-Microsoft-Exchange-Diagnostics: 1;CO2PR03MB2264;31:slcc+D7xfN3bWxyguqAE740n/Mf/EDqWLYlXKzDGMvGIdutSC3WTRhKhwkNz3pqFZFhHiT4zBhhCxV1/ydLrOtgpyPupu5yokVbplLItHoKkNVf+1A8h8MpA7nWrQommPZTNGS5iz3OO6TuaWwnTRkPQH0DaPRkeMbqDsUcj/CrsSMavWFg7VBTYmbOmth1L+uE12favr7sJkNkkkVjbIR1+Nmbt20B8+ESIUzl7uas=;20:qmJ0GJZuS23/HyYPuSZR7tNuTBaTBXvuofQVDVX4joZblmFQ1+TR0eSJq0Bx0eSGu4oP2VTAPbG8EVjAFOtkVL0ItW8+NbRVGXNMsWBehLm6MgPivu5sUM25DLzJb60Kn+EuctaWg49hDDHA2B3fE38A3uNgpfkneUgRl21+Edgw3ofhwKyib0NXWU3UukCjRg/PqRr3TkrKb4RIqmis1bv64tSCKKlqImWs6FXALdpxDoewY7FAhQ1e+B5uFUB2uaOfM34KQi7LC7PLqphhsMvg8RG8CyTuB9ilfBYSmaRlts1FYtl40u2UgnU0cSxUIznKCjokIPlbIV0vfXtDtMFvIEpWC5abAf6OVf0LJ7PuTsEWxBWaieMRW1Icw/VuuPgygZCu/ElA1dFpUYeVIy6aP8DNrtnywWpezx8f1D3pNG8swuQ9kfMNHVhEADNFkkeE/KDVvosLyM6ONWaYlrH14GlM+2a84q0n408qA5/HVEYFUy2NOZNIJWcghnf1 X-Microsoft-Antispam-PRVS: X-MS-Exchange-SenderADCheck: 1 X-Exchange-Antispam-Report-CFA-Test: BCL:0;PCL:0;RULEID:(8211001083)(3230017)(999002)(6040522)(2401047)(5005006)(8121501046)(93006095)(93004095)(10201501046)(3231472)(944501520)(4982022)(52105112)(3002001)(6055026)(148016)(149066)(150057)(6041310)(20161123562045)(20161123558120)(20161123564045)(20161123560045)(201703131423095)(201702281528075)(20161123555045)(201703061421075)(201703061406153)(201708071742011)(7699051)(76991095);SRVR:CO2PR03MB2264;BCL:0;PCL:0;RULEID:;SRVR:CO2PR03MB2264; X-Microsoft-Exchange-Diagnostics: 1;CO2PR03MB2264;4:HiXwNxI3R6cLe7dkEx1StRWvWvUSQ/meETR29FxMPFK3QNafQF9v2pfYQvCAf9hzOXfcnv1AK1s9y9vjCXxOchRQCOTjGquUN0Qszl22t1OFFgr8owPDHS3Q1IFzwgFbNlNLrzQ9Wc0eKMZumg8f+LZC+Nmkxrp8RQ1/+gM1QbdtdhdwgrJdfie3gIwBQcm3O/VyAEFt0wV3qxATqBKkYdLASdfl4/PY1DNboRqpbBgYWONUXij2k1/ykm1adv3+qBZIDqQqhwEaCKZPRyG0qg== X-Forefront-PRVS: 08828D20BC X-Microsoft-Exchange-Diagnostics: =?us-ascii?Q?1;CO2PR03MB2264;23:uSs2FEqEugvNDUUMh3h/3G1iFn1lHWyez2mxM4Ihs?= =?us-ascii?Q?iry+4yEVL5lIO1JJzhH2FA+6tM/mZ9QEAFx2ln05pYhE277IJoGBENcn/lXs?= =?us-ascii?Q?WsGiQUge7+cQOcVl8uWqTgwk49rjvSRK9uIm1UycBMmVit1C4bUFYi9QOP/d?= =?us-ascii?Q?zzOToPJKfYhEd8ZoILkXW9OfogevGlZNtq87APeLH0PCIzJrLkY3OKonlQM4?= =?us-ascii?Q?AoEZFxXnGPmxBAe2ScJi6iDINzpBp61Jqx1Vw7v7tsXU30eDhHQYWEGu7rtB?= =?us-ascii?Q?gOxZyPPQ0+w3kp+O0tcGsahgD84Td4L4oTWaEXeAbNcRDP6AVBGZN/19x8/+?= =?us-ascii?Q?2nHBWFg+ebsStx5F9ucD9t2zU5ELiZp9sRbiXVAQkCCCae5MTxnnP3TbOJaK?= =?us-ascii?Q?fZy0Yl50lytLs5VCC1Ynu+KlaogS5uz6XD4rtQKYbajGzKNzg3HhHNzu8vm3?= =?us-ascii?Q?0r8TVmsnnQIySbf3AhLVs2KY/JQQe4roNUTfUKuv13FFRhuZ3CtWytGpTggd?= =?us-ascii?Q?xlYAsa0EfGA/yG5tuQpdUKNkvn8ZmYIvDxa/D1dNSAbKdkWIBKaFheeSpQUb?= =?us-ascii?Q?WVhXwIyjQkRyrdwrO1bwJY094u8w/HlFiKOZQwcoKOfDEOs6P9i4apR6Rc3F?= =?us-ascii?Q?QFvCMl4GCVgZNwwIxUwQkzBlNnQONboe39kU1ZxT6q00fcL6pJ7tVaN+2ABH?= =?us-ascii?Q?dAmZ8TgZRImr5AnA/56tOJxvIXNsHEudEO/djwL4S72JscJueOEMGusKKQIX?= =?us-ascii?Q?okKWZiET3cp40tQ1ZWey4a0sciyG23xHUEJUnYjjqSj0JcDG34rbw0Xq02IW?= =?us-ascii?Q?sEgrb3MaYK+EVImpxfijyo2fTbaV4BFTTvr+X3vqO3w27H4w9RPSF2AiEPqq?= =?us-ascii?Q?0RErmqQQiRO5MQG4luLMJFudTfO8kozqiA9S/fsuUHx8zPDGsu/wrMMZbZRw?= =?us-ascii?Q?nB2SzE9/FeNzGQfAFt11Fl0KRwjhOPOMvYEfnx7TwOgYo1QHa9g3DRuBz8if?= =?us-ascii?Q?mqIrwb11EAlzSD7c15KWzL+aKYDnppJl33O2lUQzDnpeIu4sVya4V7GZbN0B?= =?us-ascii?Q?mFbD/Jgrm8f+uzQXbnEb+7V3OZBsVrUej728MleohzOsVPCBQL7PRKA/6M64?= =?us-ascii?Q?xGjB6YV0uIywbMykbLx1/HKMh2tPyfTIn4QqLNsRfgB/Z5xcTRmMvcOrLdiR?= =?us-ascii?Q?LHlFhjBRRlJJ9I=3D?= X-Microsoft-Antispam-Message-Info: 441uy+9vwumaOEUzwVIow8NxyKcLJOfKGWSL+6IWy+UhZ819WKPdxtUwaWRU1fiIgfRrVsodGn4yLmvZGuHacTkrxfcrGrd3l9ztL1b9O8zxBXQpvrhSNCJDPI3g48SnA57iDtRvXDrZIzHdjW8J2LFFqzZF9EsU7JXuObAoAgc1a83uyw+2lRxSg/YDk01v85k4/xbXJp/mQkykTkzafang0ArksVMf/KHnz3DREq01pgYigtlCR+wH8Ur1b4pQJmTA03jd2ZLYk8z6CPXqDOi2kbm1K8jVFfo+e9dguPTm36lx5MzUT7pOrgk6X+2e X-Microsoft-Exchange-Diagnostics: 1;CO2PR03MB2264;6:LolHTIfGV5Td8oL+8cUQV3XCYwczgzVDUpuPYW0rtlvZ5VSvgzo98e0xBfJ7s551WdW52KPCkIja9eqVssYYTY+8RD5M/Ac+eHPIR3zFjRVNkvSmAc8lvOsZi2ZJrsjqMlXHYzogSqc2nDsolxNXHnlknKOE/kl84wh4/vtl4hL1QJzhZWUUHKb8ppw86T4BOpW887nSxcxfSZC2XVtlBYp7tV6UFI79g4cvVEIb0pf99qpCt6nin0FbkosZc5NGv82VZPXYxjte+GaLVQ6+9OLPTrX3EU6kl+CLNixBnueoWHaVbp6zDpnJlolHjiX7hN0kTu7hqcraFhSrXewuq9w34BybmGgXeNEncCOec0xLpuxUlCfyOmWk8quNZM5iXgCNVjiwV5Ytd6FaDw8gJ0zUrL5mQzpryz32FAt0WpWPZkwIaPHVZY6OFTIy2sUoRCW72tAsqpww8Ggyk9xjeA==;5:sWc78A4pxh/g8aPEexRJq4W/f8MBGvMDQX+T5sS3lR+sDR5SNAc0ZlDTrw89ahnGHSq7V1U1z7U1/IEuxuS758rn+5RvPlCFf8tU7GYNy/1rJxehpNht6Juy9e8HaSDqWJD3JR8vG6LLa40ShWMn2brQbBUIaGTnXNcYPXc2BSU=;7:ld1BJCIxxMOPvCrmsNsireICuOw9aHoDvPqfKk9RLChMqfu0w2a2juY2+pAhtcqWCXpviFHqJftqizHU5o5w0ffG5cn11u8ccHDf0uCYklbf1s/G34rMgij91p1MdQAuWGfVFkbOi1eDnDnVEbe1Fw== SpamDiagnosticOutput: 1:99 SpamDiagnosticMetadata: NSPM X-OriginatorOrg: analog.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 10 Dec 2018 11:03:52.0456 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: cb65f774-5a5b-420a-4203-08d65e8f2b6f X-MS-Exchange-CrossTenant-Id: eaa689b4-8f87-40e0-9c6f-7228de4d754a X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=eaa689b4-8f87-40e0-9c6f-7228de4d754a;Ip=[137.71.25.55];Helo=[nwd2mta1.analog.com] X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: CO2PR03MB2264 Sender: linux-iio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org Move ad7606 ADC driver out of staging and into the mainline. Signed-off-by: Stefan Popa --- Changes in v2: - Simplified the Kconfig menu. - Added SPDX-License-Identifier. - Ordered the includes alphabetically. - Used a threaded interrupt. - Replaced ad7606_poll_bh_to_ring() with ad7606_trigger_handler(). - Used a trigger. - Replaced wait_event_interruptible() with wait_for_completion_timeout(). - Replaced wake_up_interruptible() with complete(). - Used devm_iio_triggered_buffer_setup(). - Added buffer_ops. - Used single line comments where needed. - Removed the gap between docs and struct. - Added ad7606_of_match[]. Changes in v3: - Added a comment which offers more information of the way the interrupt is triggered. - Fixed the way a new conversion is triggered. - endianness = IIO_CPU - Removed unnecessary mutex locks. - Removed the buffer_postdisable ops and replaced it with buffer_predisable. - Added a devm_add_action_or_reset() which deals with regulator_disable(). - Misc style fixes. Changes in v4: - Removed unused fields from the ad7606_state struct. - Used the find_closest() macro when searching for the available scale and the oversampling ratios. MAINTAINERS | 7 + drivers/iio/adc/Kconfig | 28 ++ drivers/iio/adc/Makefile | 3 + drivers/iio/adc/ad7606.c | 588 +++++++++++++++++++++++++++++++++++ drivers/iio/adc/ad7606.h | 99 ++++++ drivers/iio/adc/ad7606_par.c | 105 +++++++ drivers/iio/adc/ad7606_spi.c | 82 +++++ drivers/staging/iio/adc/Kconfig | 34 -- drivers/staging/iio/adc/Makefile | 3 - drivers/staging/iio/adc/ad7606.c | 565 --------------------------------- drivers/staging/iio/adc/ad7606.h | 106 ------- drivers/staging/iio/adc/ad7606_par.c | 113 ------- drivers/staging/iio/adc/ad7606_spi.c | 79 ----- 13 files changed, 912 insertions(+), 900 deletions(-) create mode 100644 drivers/iio/adc/ad7606.c create mode 100644 drivers/iio/adc/ad7606.h create mode 100644 drivers/iio/adc/ad7606_par.c create mode 100644 drivers/iio/adc/ad7606_spi.c delete mode 100644 drivers/staging/iio/adc/ad7606.c delete mode 100644 drivers/staging/iio/adc/ad7606.h delete mode 100644 drivers/staging/iio/adc/ad7606_par.c delete mode 100644 drivers/staging/iio/adc/ad7606_spi.c diff --git a/MAINTAINERS b/MAINTAINERS index f642044..843545d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -839,6 +839,13 @@ S: Supported F: drivers/iio/dac/ad5758.c F: Documentation/devicetree/bindings/iio/dac/ad5758.txt +ANALOG DEVICES INC AD7606 DRIVER +M: Stefan Popa +L: linux-iio@vger.kernel.org +W: http://ez.analog.com/community/linux-device-drivers +S: Supported +F: drivers/iio/adc/ad7606.c + ANALOG DEVICES INC AD9389B DRIVER M: Hans Verkuil L: linux-media@vger.kernel.org diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index a52fea8..c3f61c9 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -58,6 +58,34 @@ config AD7476 To compile this driver as a module, choose M here: the module will be called ad7476. +config AD7606 + tristate + depends on GPIOLIB || COMPILE_TEST + depends on HAS_IOMEM + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + +config AD7606_IFACE_PARALLEL + tristate "Analog Devices AD7606 ADC driver with parallel interface support" + select AD7606 + help + Say yes here to build parallel interface support for Analog Devices: + ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC). + + To compile this driver as a module, choose M here: the + module will be called ad7606_parallel. + +config AD7606_IFACE_SPI + tristate "Analog Devices AD7606 ADC driver with spi interface support" + depends on SPI + select AD7606 + help + Say yes here to build spi interface support for Analog Devices: + ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC). + + To compile this driver as a module, choose M here: the + module will be called ad7606_spi. + config AD7766 tristate "Analog Devices AD7766/AD7767 ADC driver" depends on SPI_MASTER diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index a6e6a0b..b734f4f 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -8,6 +8,9 @@ obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o obj-$(CONFIG_AD7266) += ad7266.o obj-$(CONFIG_AD7291) += ad7291.o obj-$(CONFIG_AD7298) += ad7298.o +obj-$(CONFIG_AD7606_IFACE_PARALLEL) += ad7606_par.o +obj-$(CONFIG_AD7606_IFACE_SPI) += ad7606_spi.o +obj-$(CONFIG_AD7606) += ad7606.o obj-$(CONFIG_AD7923) += ad7923.o obj-$(CONFIG_AD7476) += ad7476.o obj-$(CONFIG_AD7766) += ad7766.o diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c new file mode 100644 index 0000000..fa3c8e0 --- /dev/null +++ b/drivers/iio/adc/ad7606.c @@ -0,0 +1,588 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * AD7606 SPI ADC driver + * + * Copyright 2011 Analog Devices Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "ad7606.h" + +/* + * Scales are computed as 5000/32768 and 10000/32768 respectively, + * so that when applied to the raw values they provide mV values + */ +static const unsigned int scale_avail[2] = { + 152588, 305176 +}; + +static const unsigned int ad7606_oversampling_avail[7] = { + 1, 2, 4, 8, 16, 32, 64, +}; + +static int ad7606_reset(struct ad7606_state *st) +{ + if (st->gpio_reset) { + gpiod_set_value(st->gpio_reset, 1); + ndelay(100); /* t_reset >= 100ns */ + gpiod_set_value(st->gpio_reset, 0); + return 0; + } + + return -ENODEV; +} + +static int ad7606_read_samples(struct ad7606_state *st) +{ + unsigned int num = st->chip_info->num_channels; + u16 *data = st->data; + int ret; + + /* + * The frstdata signal is set to high while and after reading the sample + * of the first channel and low for all other channels. This can be used + * to check that the incoming data is correctly aligned. During normal + * operation the data should never become unaligned, but some glitch or + * electrostatic discharge might cause an extra read or clock cycle. + * Monitoring the frstdata signal allows to recover from such failure + * situations. + */ + + if (st->gpio_frstdata) { + ret = st->bops->read_block(st->dev, 1, data); + if (ret) + return ret; + + if (!gpiod_get_value(st->gpio_frstdata)) { + ad7606_reset(st); + return -EIO; + } + + data++; + num--; + } + + return st->bops->read_block(st->dev, num, data); +} + +static irqreturn_t ad7606_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct ad7606_state *st = iio_priv(indio_dev); + int ret; + + mutex_lock(&st->lock); + + ret = ad7606_read_samples(st); + if (ret == 0) + iio_push_to_buffers_with_timestamp(indio_dev, st->data, + iio_get_time_ns(indio_dev)); + + iio_trigger_notify_done(indio_dev->trig); + /* The rising edge of the CONVST signal starts a new conversion. */ + gpiod_set_value(st->gpio_convst, 1); + + mutex_unlock(&st->lock); + + return IRQ_HANDLED; +} + +static int ad7606_scan_direct(struct iio_dev *indio_dev, unsigned int ch) +{ + struct ad7606_state *st = iio_priv(indio_dev); + int ret; + + gpiod_set_value(st->gpio_convst, 1); + ret = wait_for_completion_timeout(&st->completion, + msecs_to_jiffies(1000)); + if (!ret) { + ret = -ETIMEDOUT; + goto error_ret; + } + + ret = ad7606_read_samples(st); + if (ret == 0) + ret = st->data[ch]; + +error_ret: + gpiod_set_value(st->gpio_convst, 0); + + return ret; +} + +static int ad7606_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long m) +{ + int ret; + struct ad7606_state *st = iio_priv(indio_dev); + + switch (m) { + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + ret = ad7606_scan_direct(indio_dev, chan->address); + iio_device_release_direct_mode(indio_dev); + + if (ret < 0) + return ret; + *val = (short)ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = scale_avail[st->range]; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *val = st->oversampling; + return IIO_VAL_INT; + } + return -EINVAL; +} + +static ssize_t in_voltage_scale_available_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int i, len = 0; + + for (i = 0; i < ARRAY_SIZE(scale_avail); i++) + len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ", + scale_avail[i]); + + buf[len - 1] = '\n'; + + return len; +} + +static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0); + +static int ad7606_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct ad7606_state *st = iio_priv(indio_dev); + int values[3], i; + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + mutex_lock(&st->lock); + i = find_closest(val2, scale_avail, ARRAY_SIZE(scale_avail)); + gpiod_set_value(st->gpio_range, i); + st->range = i; + mutex_unlock(&st->lock); + + return 0; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + if (val2) + return -EINVAL; + i = find_closest(val, ad7606_oversampling_avail, + ARRAY_SIZE(ad7606_oversampling_avail)); + + values[0] = (i >> 0) & 1; + values[1] = (i >> 1) & 1; + values[2] = (i >> 2) & 1; + + mutex_lock(&st->lock); + gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc, + values); + st->oversampling = ad7606_oversampling_avail[i]; + mutex_unlock(&st->lock); + + return 0; + default: + return -EINVAL; + } +} + +static IIO_CONST_ATTR(oversampling_ratio_available, "1 2 4 8 16 32 64"); + +static struct attribute *ad7606_attributes_os_and_range[] = { + &iio_dev_attr_in_voltage_scale_available.dev_attr.attr, + &iio_const_attr_oversampling_ratio_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ad7606_attribute_group_os_and_range = { + .attrs = ad7606_attributes_os_and_range, +}; + +static struct attribute *ad7606_attributes_os[] = { + &iio_const_attr_oversampling_ratio_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ad7606_attribute_group_os = { + .attrs = ad7606_attributes_os, +}; + +static struct attribute *ad7606_attributes_range[] = { + &iio_dev_attr_in_voltage_scale_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ad7606_attribute_group_range = { + .attrs = ad7606_attributes_range, +}; + +#define AD760X_CHANNEL(num, mask) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = num, \ + .address = num, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\ + .info_mask_shared_by_all = mask, \ + .scan_index = num, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + }, \ +} + +#define AD7605_CHANNEL(num) \ + AD760X_CHANNEL(num, 0) + +#define AD7606_CHANNEL(num) \ + AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO)) + +static const struct iio_chan_spec ad7605_channels[] = { + IIO_CHAN_SOFT_TIMESTAMP(4), + AD7605_CHANNEL(0), + AD7605_CHANNEL(1), + AD7605_CHANNEL(2), + AD7605_CHANNEL(3), +}; + +static const struct iio_chan_spec ad7606_channels[] = { + IIO_CHAN_SOFT_TIMESTAMP(8), + AD7606_CHANNEL(0), + AD7606_CHANNEL(1), + AD7606_CHANNEL(2), + AD7606_CHANNEL(3), + AD7606_CHANNEL(4), + AD7606_CHANNEL(5), + AD7606_CHANNEL(6), + AD7606_CHANNEL(7), +}; + +static const struct ad7606_chip_info ad7606_chip_info_tbl[] = { + /* More devices added in future */ + [ID_AD7605_4] = { + .channels = ad7605_channels, + .num_channels = 5, + }, + [ID_AD7606_8] = { + .channels = ad7606_channels, + .num_channels = 9, + .has_oversampling = true, + }, + [ID_AD7606_6] = { + .channels = ad7606_channels, + .num_channels = 7, + .has_oversampling = true, + }, + [ID_AD7606_4] = { + .channels = ad7606_channels, + .num_channels = 5, + .has_oversampling = true, + }, +}; + +static int ad7606_request_gpios(struct ad7606_state *st) +{ + struct device *dev = st->dev; + + st->gpio_convst = devm_gpiod_get(dev, "adi,conversion-start", + GPIOD_OUT_LOW); + if (IS_ERR(st->gpio_convst)) + return PTR_ERR(st->gpio_convst); + + st->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(st->gpio_reset)) + return PTR_ERR(st->gpio_reset); + + st->gpio_range = devm_gpiod_get_optional(dev, "adi,range", + GPIOD_OUT_LOW); + if (IS_ERR(st->gpio_range)) + return PTR_ERR(st->gpio_range); + + st->gpio_standby = devm_gpiod_get_optional(dev, "standby", + GPIOD_OUT_HIGH); + if (IS_ERR(st->gpio_standby)) + return PTR_ERR(st->gpio_standby); + + st->gpio_frstdata = devm_gpiod_get_optional(dev, "adi,first-data", + GPIOD_IN); + if (IS_ERR(st->gpio_frstdata)) + return PTR_ERR(st->gpio_frstdata); + + if (!st->chip_info->has_oversampling) + return 0; + + st->gpio_os = devm_gpiod_get_array_optional(dev, + "adi,oversampling-ratio", + GPIOD_OUT_LOW); + return PTR_ERR_OR_ZERO(st->gpio_os); +} + +/* + * The BUSY signal indicates when conversions are in progress, so when a rising + * edge of CONVST is applied, BUSY goes logic high and transitions low at the + * end of the entire conversion process. The falling edge of the BUSY signal + * triggers this interrupt. + */ +static irqreturn_t ad7606_interrupt(int irq, void *dev_id) +{ + struct iio_dev *indio_dev = dev_id; + struct ad7606_state *st = iio_priv(indio_dev); + + if (iio_buffer_enabled(indio_dev)) { + gpiod_set_value(st->gpio_convst, 0); + iio_trigger_poll_chained(st->trig); + } else { + complete(&st->completion); + } + + return IRQ_HANDLED; +}; + +static int ad7606_validate_trigger(struct iio_dev *indio_dev, + struct iio_trigger *trig) +{ + struct ad7606_state *st = iio_priv(indio_dev); + + if (st->trig != trig) + return -EINVAL; + + return 0; +} + +static int ad7606_buffer_postenable(struct iio_dev *indio_dev) +{ + struct ad7606_state *st = iio_priv(indio_dev); + + iio_triggered_buffer_postenable(indio_dev); + gpiod_set_value(st->gpio_convst, 1); + + return 0; +} + +static int ad7606_buffer_predisable(struct iio_dev *indio_dev) +{ + struct ad7606_state *st = iio_priv(indio_dev); + int ret; + + reinit_completion(&st->completion); + gpiod_set_value(st->gpio_convst, 1); + ret = wait_for_completion_timeout(&st->completion, + msecs_to_jiffies(1000)); + gpiod_set_value(st->gpio_convst, 0); + + return iio_triggered_buffer_predisable(indio_dev); +} + +static const struct iio_buffer_setup_ops ad7606_buffer_ops = { + .postenable = &ad7606_buffer_postenable, + .predisable = &ad7606_buffer_predisable, +}; + +static const struct iio_info ad7606_info_no_os_or_range = { + .read_raw = &ad7606_read_raw, + .validate_trigger = &ad7606_validate_trigger, +}; + +static const struct iio_info ad7606_info_os_and_range = { + .read_raw = &ad7606_read_raw, + .write_raw = &ad7606_write_raw, + .attrs = &ad7606_attribute_group_os_and_range, + .validate_trigger = &ad7606_validate_trigger, +}; + +static const struct iio_info ad7606_info_os = { + .read_raw = &ad7606_read_raw, + .write_raw = &ad7606_write_raw, + .attrs = &ad7606_attribute_group_os, + .validate_trigger = &ad7606_validate_trigger, +}; + +static const struct iio_info ad7606_info_range = { + .read_raw = &ad7606_read_raw, + .write_raw = &ad7606_write_raw, + .attrs = &ad7606_attribute_group_range, + .validate_trigger = &ad7606_validate_trigger, +}; + +static const struct iio_trigger_ops ad7606_trigger_ops = { + .validate_device = iio_trigger_validate_own_device, +}; + +static void ad7606_regulator_disable(void *data) +{ + struct ad7606_state *st = data; + + regulator_disable(st->reg); +} + +int ad7606_probe(struct device *dev, int irq, void __iomem *base_address, + const char *name, unsigned int id, + const struct ad7606_bus_ops *bops) +{ + struct ad7606_state *st; + int ret; + struct iio_dev *indio_dev; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + dev_set_drvdata(dev, indio_dev); + + st->dev = dev; + mutex_init(&st->lock); + st->bops = bops; + st->base_address = base_address; + st->oversampling = 1; + + st->reg = devm_regulator_get(dev, "avcc"); + if (IS_ERR(st->reg)) + return PTR_ERR(st->reg); + + ret = regulator_enable(st->reg); + if (ret) { + dev_err(dev, "Failed to enable specified AVcc supply\n"); + return ret; + } + + ret = devm_add_action_or_reset(dev, ad7606_regulator_disable, st); + if (ret) + return ret; + + st->chip_info = &ad7606_chip_info_tbl[id]; + + ret = ad7606_request_gpios(st); + if (ret) + return ret; + + indio_dev->dev.parent = dev; + if (st->gpio_os) { + if (st->gpio_range) + indio_dev->info = &ad7606_info_os_and_range; + else + indio_dev->info = &ad7606_info_os; + } else { + if (st->gpio_range) + indio_dev->info = &ad7606_info_range; + else + indio_dev->info = &ad7606_info_no_os_or_range; + } + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->name = name; + indio_dev->channels = st->chip_info->channels; + indio_dev->num_channels = st->chip_info->num_channels; + + ret = ad7606_reset(st); + if (ret) + dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n"); + + st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d", + indio_dev->name, indio_dev->id); + if (st->trig == NULL) + return -ENOMEM; + + st->trig->ops = &ad7606_trigger_ops; + st->trig->dev.parent = dev; + iio_trigger_set_drvdata(st->trig, indio_dev); + ret = devm_iio_trigger_register(dev, st->trig); + if (ret) + return ret; + + indio_dev->trig = iio_trigger_get(st->trig); + + init_completion(&st->completion); + + ret = devm_request_threaded_irq(dev, irq, + NULL, + &ad7606_interrupt, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + name, indio_dev); + if (ret) + return ret; + + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, + &iio_pollfunc_store_time, + &ad7606_trigger_handler, + &ad7606_buffer_ops); + if (ret) + return ret; + + return devm_iio_device_register(dev, indio_dev); + +} +EXPORT_SYMBOL_GPL(ad7606_probe); + +#ifdef CONFIG_PM_SLEEP + +static int ad7606_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7606_state *st = iio_priv(indio_dev); + + if (st->gpio_standby) { + gpiod_set_value(st->gpio_range, 1); + gpiod_set_value(st->gpio_standby, 0); + } + + return 0; +} + +static int ad7606_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7606_state *st = iio_priv(indio_dev); + + if (st->gpio_standby) { + gpiod_set_value(st->gpio_range, st->range); + gpiod_set_value(st->gpio_standby, 1); + ad7606_reset(st); + } + + return 0; +} + +SIMPLE_DEV_PM_OPS(ad7606_pm_ops, ad7606_suspend, ad7606_resume); +EXPORT_SYMBOL_GPL(ad7606_pm_ops); + +#endif + +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("Analog Devices AD7606 ADC"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h new file mode 100644 index 0000000..40433af --- /dev/null +++ b/drivers/iio/adc/ad7606.h @@ -0,0 +1,99 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * AD7606 ADC driver + * + * Copyright 2011 Analog Devices Inc. + */ + +#ifndef IIO_ADC_AD7606_H_ +#define IIO_ADC_AD7606_H_ + +/** + * struct ad7606_chip_info - chip specific information + * @channels: channel specification + * @num_channels: number of channels + * @has_oversampling: whether the device has oversampling support + */ +struct ad7606_chip_info { + const struct iio_chan_spec *channels; + unsigned int num_channels; + bool has_oversampling; +}; + +/** + * struct ad7606_state - driver instance specific data + * @dev pointer to kernel device + * @chip_info entry in the table of chips that describes this device + * @reg regulator info for the the power supply of the device + * @bops bus operations (SPI or parallel) + * @range voltage range selection, selects which scale to apply + * @oversampling oversampling selection + * @base_address address from where to read data in parallel operation + * @lock protect sensor state from concurrent accesses to GPIOs + * @gpio_convst GPIO descriptor for conversion start signal (CONVST) + * @gpio_reset GPIO descriptor for device hard-reset + * @gpio_range GPIO descriptor for range selection + * @gpio_standby GPIO descriptor for stand-by signal (STBY), + * controls power-down mode of device + * @gpio_frstdata GPIO descriptor for reading from device when data + * is being read on the first channel + * @gpio_os GPIO descriptors to control oversampling on the device + * @complete completion to indicate end of conversion + * @trig The IIO trigger associated with the device. + * @data buffer for reading data from the device + */ +struct ad7606_state { + struct device *dev; + const struct ad7606_chip_info *chip_info; + struct regulator *reg; + const struct ad7606_bus_ops *bops; + unsigned int range; + unsigned int oversampling; + void __iomem *base_address; + + struct mutex lock; /* protect sensor state */ + struct gpio_desc *gpio_convst; + struct gpio_desc *gpio_reset; + struct gpio_desc *gpio_range; + struct gpio_desc *gpio_standby; + struct gpio_desc *gpio_frstdata; + struct gpio_descs *gpio_os; + struct iio_trigger *trig; + struct completion completion; + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + * 8 * 16-bit samples + 64-bit timestamp + */ + unsigned short data[12] ____cacheline_aligned; +}; + +/** + * struct ad7606_bus_ops - driver bus operations + * @read_block function pointer for reading blocks of data + */ +struct ad7606_bus_ops { + /* more methods added in future? */ + int (*read_block)(struct device *dev, int num, void *data); +}; + +int ad7606_probe(struct device *dev, int irq, void __iomem *base_address, + const char *name, unsigned int id, + const struct ad7606_bus_ops *bops); + +enum ad7606_supported_device_ids { + ID_AD7605_4, + ID_AD7606_8, + ID_AD7606_6, + ID_AD7606_4 +}; + +#ifdef CONFIG_PM_SLEEP +extern const struct dev_pm_ops ad7606_pm_ops; +#define AD7606_PM_OPS (&ad7606_pm_ops) +#else +#define AD7606_PM_OPS NULL +#endif + +#endif /* IIO_ADC_AD7606_H_ */ diff --git a/drivers/iio/adc/ad7606_par.c b/drivers/iio/adc/ad7606_par.c new file mode 100644 index 0000000..32c7069 --- /dev/null +++ b/drivers/iio/adc/ad7606_par.c @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * AD7606 Parallel Interface ADC driver + * + * Copyright 2011 Analog Devices Inc. + */ + +#include +#include +#include +#include +#include + +#include +#include "ad7606.h" + +static int ad7606_par16_read_block(struct device *dev, + int count, void *buf) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7606_state *st = iio_priv(indio_dev); + + insw((unsigned long)st->base_address, buf, count); + + return 0; +} + +static const struct ad7606_bus_ops ad7606_par16_bops = { + .read_block = ad7606_par16_read_block, +}; + +static int ad7606_par8_read_block(struct device *dev, + int count, void *buf) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7606_state *st = iio_priv(indio_dev); + + insb((unsigned long)st->base_address, buf, count * 2); + + return 0; +} + +static const struct ad7606_bus_ops ad7606_par8_bops = { + .read_block = ad7606_par8_read_block, +}; + +static int ad7606_par_probe(struct platform_device *pdev) +{ + const struct platform_device_id *id = platform_get_device_id(pdev); + struct resource *res; + void __iomem *addr; + resource_size_t remap_size; + int irq; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no irq: %d\n", irq); + return irq; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + addr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(addr)) + return PTR_ERR(addr); + + remap_size = resource_size(res); + + return ad7606_probe(&pdev->dev, irq, addr, + id->name, id->driver_data, + remap_size > 1 ? &ad7606_par16_bops : + &ad7606_par8_bops); +} + +static const struct platform_device_id ad7606_driver_ids[] = { + { .name = "ad7605-4", .driver_data = ID_AD7605_4, }, + { .name = "ad7606-4", .driver_data = ID_AD7606_4, }, + { .name = "ad7606-6", .driver_data = ID_AD7606_6, }, + { .name = "ad7606-8", .driver_data = ID_AD7606_8, }, + { } +}; +MODULE_DEVICE_TABLE(platform, ad7606_driver_ids); + +static const struct of_device_id ad7606_of_match[] = { + { .compatible = "adi,ad7605-4" }, + { .compatible = "adi,ad7606-4" }, + { .compatible = "adi,ad7606-6" }, + { .compatible = "adi,ad7606-8" }, + { }, +}; +MODULE_DEVICE_TABLE(of, ad7606_of_match); + +static struct platform_driver ad7606_driver = { + .probe = ad7606_par_probe, + .id_table = ad7606_driver_ids, + .driver = { + .name = "ad7606", + .pm = AD7606_PM_OPS, + .of_match_table = ad7606_of_match, + }, +}; +module_platform_driver(ad7606_driver); + +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("Analog Devices AD7606 ADC"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/adc/ad7606_spi.c b/drivers/iio/adc/ad7606_spi.c new file mode 100644 index 0000000..6bb1867 --- /dev/null +++ b/drivers/iio/adc/ad7606_spi.c @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * AD7606 SPI ADC driver + * + * Copyright 2011 Analog Devices Inc. + */ + +#include +#include +#include +#include + +#include +#include "ad7606.h" + +#define MAX_SPI_FREQ_HZ 23500000 /* VDRIVE above 4.75 V */ + +static int ad7606_spi_read_block(struct device *dev, + int count, void *buf) +{ + struct spi_device *spi = to_spi_device(dev); + int i, ret; + unsigned short *data = buf; + __be16 *bdata = buf; + + ret = spi_read(spi, buf, count * 2); + if (ret < 0) { + dev_err(&spi->dev, "SPI read error\n"); + return ret; + } + + for (i = 0; i < count; i++) + data[i] = be16_to_cpu(bdata[i]); + + return 0; +} + +static const struct ad7606_bus_ops ad7606_spi_bops = { + .read_block = ad7606_spi_read_block, +}; + +static int ad7606_spi_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + + return ad7606_probe(&spi->dev, spi->irq, NULL, + id->name, id->driver_data, + &ad7606_spi_bops); +} + +static const struct spi_device_id ad7606_id_table[] = { + { "ad7605-4", ID_AD7605_4 }, + { "ad7606-4", ID_AD7606_4 }, + { "ad7606-6", ID_AD7606_6 }, + { "ad7606-8", ID_AD7606_8 }, + {} +}; +MODULE_DEVICE_TABLE(spi, ad7606_id_table); + +static const struct of_device_id ad7606_of_match[] = { + { .compatible = "adi,ad7605-4" }, + { .compatible = "adi,ad7606-4" }, + { .compatible = "adi,ad7606-6" }, + { .compatible = "adi,ad7606-8" }, + { }, +}; +MODULE_DEVICE_TABLE(of, ad7606_of_match); + +static struct spi_driver ad7606_driver = { + .driver = { + .name = "ad7606", + .of_match_table = ad7606_of_match, + .pm = AD7606_PM_OPS, + }, + .probe = ad7606_spi_probe, + .id_table = ad7606_id_table, +}; +module_spi_driver(ad7606_driver); + +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("Analog Devices AD7606 ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig index 9d3062a..2c05adb 100644 --- a/drivers/staging/iio/adc/Kconfig +++ b/drivers/staging/iio/adc/Kconfig @@ -3,40 +3,6 @@ # menu "Analog to digital converters" -config AD7606 - tristate "Analog Devices AD7606 ADC driver" - depends on GPIOLIB || COMPILE_TEST - depends on HAS_IOMEM - select IIO_BUFFER - select IIO_TRIGGERED_BUFFER - help - Say yes here to build support for Analog Devices: - ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC). - - To compile this driver as a module, choose M here: the - module will be called ad7606. - -config AD7606_IFACE_PARALLEL - tristate "parallel interface support" - depends on AD7606 - help - Say yes here to include parallel interface support on the AD7606 - ADC driver. - - To compile this driver as a module, choose M here: the - module will be called ad7606_parallel. - -config AD7606_IFACE_SPI - tristate "spi interface support" - depends on AD7606 - depends on SPI - help - Say yes here to include parallel interface support on the AD7606 - ADC driver. - - To compile this driver as a module, choose M here: the - module will be called ad7606_spi. - config AD7780 tristate "Analog Devices AD7780 and similar ADCs driver" depends on SPI diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile index ebe83c1..57a18e7 100644 --- a/drivers/staging/iio/adc/Makefile +++ b/drivers/staging/iio/adc/Makefile @@ -3,9 +3,6 @@ # Makefile for industrial I/O ADC drivers # -obj-$(CONFIG_AD7606_IFACE_PARALLEL) += ad7606_par.o -obj-$(CONFIG_AD7606_IFACE_SPI) += ad7606_spi.o -obj-$(CONFIG_AD7606) += ad7606.o obj-$(CONFIG_AD7780) += ad7780.o obj-$(CONFIG_AD7816) += ad7816.o diff --git a/drivers/staging/iio/adc/ad7606.c b/drivers/staging/iio/adc/ad7606.c deleted file mode 100644 index 0b728b6..0000000 --- a/drivers/staging/iio/adc/ad7606.c +++ /dev/null @@ -1,565 +0,0 @@ -/* - * AD7606 SPI ADC driver - * - * Copyright 2011 Analog Devices Inc. - * - * Licensed under the GPL-2. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include "ad7606.h" - -/* - * Scales are computed as 5000/32768 and 10000/32768 respectively, - * so that when applied to the raw values they provide mV values - */ -static const unsigned int scale_avail[2][2] = { - {0, 152588}, {0, 305176} -}; - -static int ad7606_reset(struct ad7606_state *st) -{ - if (st->gpio_reset) { - gpiod_set_value(st->gpio_reset, 1); - ndelay(100); /* t_reset >= 100ns */ - gpiod_set_value(st->gpio_reset, 0); - return 0; - } - - return -ENODEV; -} - -static int ad7606_read_samples(struct ad7606_state *st) -{ - unsigned int num = st->chip_info->num_channels; - u16 *data = st->data; - int ret; - - /* - * The frstdata signal is set to high while and after reading the sample - * of the first channel and low for all other channels. This can be used - * to check that the incoming data is correctly aligned. During normal - * operation the data should never become unaligned, but some glitch or - * electrostatic discharge might cause an extra read or clock cycle. - * Monitoring the frstdata signal allows to recover from such failure - * situations. - */ - - if (st->gpio_frstdata) { - ret = st->bops->read_block(st->dev, 1, data); - if (ret) - return ret; - - if (!gpiod_get_value(st->gpio_frstdata)) { - ad7606_reset(st); - return -EIO; - } - - data++; - num--; - } - - return st->bops->read_block(st->dev, num, data); -} - -static irqreturn_t ad7606_trigger_handler(int irq, void *p) -{ - struct iio_poll_func *pf = p; - struct ad7606_state *st = iio_priv(pf->indio_dev); - - gpiod_set_value(st->gpio_convst, 1); - - return IRQ_HANDLED; -} - -/** - * ad7606_poll_bh_to_ring() bh of trigger launched polling to ring buffer - * @work_s: the work struct through which this was scheduled - * - * Currently there is no option in this driver to disable the saving of - * timestamps within the ring. - * I think the one copy of this at a time was to avoid problems if the - * trigger was set far too high and the reads then locked up the computer. - **/ -static void ad7606_poll_bh_to_ring(struct work_struct *work_s) -{ - struct ad7606_state *st = container_of(work_s, struct ad7606_state, - poll_work); - struct iio_dev *indio_dev = iio_priv_to_dev(st); - int ret; - - ret = ad7606_read_samples(st); - if (ret == 0) - iio_push_to_buffers_with_timestamp(indio_dev, st->data, - iio_get_time_ns(indio_dev)); - - gpiod_set_value(st->gpio_convst, 0); - iio_trigger_notify_done(indio_dev->trig); -} - -static int ad7606_scan_direct(struct iio_dev *indio_dev, unsigned int ch) -{ - struct ad7606_state *st = iio_priv(indio_dev); - int ret; - - st->done = false; - gpiod_set_value(st->gpio_convst, 1); - - ret = wait_event_interruptible(st->wq_data_avail, st->done); - if (ret) - goto error_ret; - - ret = ad7606_read_samples(st); - if (ret == 0) - ret = st->data[ch]; - -error_ret: - gpiod_set_value(st->gpio_convst, 0); - - return ret; -} - -static int ad7606_read_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int *val, - int *val2, - long m) -{ - int ret; - struct ad7606_state *st = iio_priv(indio_dev); - - switch (m) { - case IIO_CHAN_INFO_RAW: - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - - ret = ad7606_scan_direct(indio_dev, chan->address); - iio_device_release_direct_mode(indio_dev); - - if (ret < 0) - return ret; - *val = (short)ret; - return IIO_VAL_INT; - case IIO_CHAN_INFO_SCALE: - *val = scale_avail[st->range][0]; - *val2 = scale_avail[st->range][1]; - return IIO_VAL_INT_PLUS_MICRO; - case IIO_CHAN_INFO_OVERSAMPLING_RATIO: - *val = st->oversampling; - return IIO_VAL_INT; - } - return -EINVAL; -} - -static ssize_t in_voltage_scale_available_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - int i, len = 0; - - for (i = 0; i < ARRAY_SIZE(scale_avail); i++) - len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%06u ", - scale_avail[i][0], scale_avail[i][1]); - - buf[len - 1] = '\n'; - - return len; -} - -static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0); - -static int ad7606_oversampling_get_index(unsigned int val) -{ - unsigned char supported[] = {1, 2, 4, 8, 16, 32, 64}; - int i; - - for (i = 0; i < ARRAY_SIZE(supported); i++) - if (val == supported[i]) - return i; - - return -EINVAL; -} - -static int ad7606_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int val, - int val2, - long mask) -{ - struct ad7606_state *st = iio_priv(indio_dev); - int values[3]; - int ret, i; - - switch (mask) { - case IIO_CHAN_INFO_SCALE: - ret = -EINVAL; - mutex_lock(&st->lock); - for (i = 0; i < ARRAY_SIZE(scale_avail); i++) - if (val2 == scale_avail[i][1]) { - gpiod_set_value(st->gpio_range, i); - st->range = i; - - ret = 0; - break; - } - mutex_unlock(&st->lock); - - return ret; - case IIO_CHAN_INFO_OVERSAMPLING_RATIO: - if (val2) - return -EINVAL; - ret = ad7606_oversampling_get_index(val); - if (ret < 0) - return ret; - - values[0] = (ret >> 0) & 1; - values[1] = (ret >> 1) & 1; - values[2] = (ret >> 2) & 1; - - mutex_lock(&st->lock); - gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc, - values); - st->oversampling = val; - mutex_unlock(&st->lock); - - return 0; - default: - return -EINVAL; - } -} - -static IIO_CONST_ATTR(oversampling_ratio_available, "1 2 4 8 16 32 64"); - -static struct attribute *ad7606_attributes_os_and_range[] = { - &iio_dev_attr_in_voltage_scale_available.dev_attr.attr, - &iio_const_attr_oversampling_ratio_available.dev_attr.attr, - NULL, -}; - -static const struct attribute_group ad7606_attribute_group_os_and_range = { - .attrs = ad7606_attributes_os_and_range, -}; - -static struct attribute *ad7606_attributes_os[] = { - &iio_const_attr_oversampling_ratio_available.dev_attr.attr, - NULL, -}; - -static const struct attribute_group ad7606_attribute_group_os = { - .attrs = ad7606_attributes_os, -}; - -static struct attribute *ad7606_attributes_range[] = { - &iio_dev_attr_in_voltage_scale_available.dev_attr.attr, - NULL, -}; - -static const struct attribute_group ad7606_attribute_group_range = { - .attrs = ad7606_attributes_range, -}; - -#define AD760X_CHANNEL(num, mask) \ - { \ - .type = IIO_VOLTAGE, \ - .indexed = 1, \ - .channel = num, \ - .address = num, \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\ - .info_mask_shared_by_all = mask, \ - .scan_index = num, \ - .scan_type = { \ - .sign = 's', \ - .realbits = 16, \ - .storagebits = 16, \ - .endianness = IIO_CPU, \ - }, \ - } - -#define AD7605_CHANNEL(num) \ - AD760X_CHANNEL(num, 0) - -#define AD7606_CHANNEL(num) \ - AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO)) - -static const struct iio_chan_spec ad7605_channels[] = { - IIO_CHAN_SOFT_TIMESTAMP(4), - AD7605_CHANNEL(0), - AD7605_CHANNEL(1), - AD7605_CHANNEL(2), - AD7605_CHANNEL(3), -}; - -static const struct iio_chan_spec ad7606_channels[] = { - IIO_CHAN_SOFT_TIMESTAMP(8), - AD7606_CHANNEL(0), - AD7606_CHANNEL(1), - AD7606_CHANNEL(2), - AD7606_CHANNEL(3), - AD7606_CHANNEL(4), - AD7606_CHANNEL(5), - AD7606_CHANNEL(6), - AD7606_CHANNEL(7), -}; - -static const struct ad7606_chip_info ad7606_chip_info_tbl[] = { - /* - * More devices added in future - */ - [ID_AD7605_4] = { - .channels = ad7605_channels, - .num_channels = 5, - }, - [ID_AD7606_8] = { - .channels = ad7606_channels, - .num_channels = 9, - .has_oversampling = true, - }, - [ID_AD7606_6] = { - .channels = ad7606_channels, - .num_channels = 7, - .has_oversampling = true, - }, - [ID_AD7606_4] = { - .channels = ad7606_channels, - .num_channels = 5, - .has_oversampling = true, - }, -}; - -static int ad7606_request_gpios(struct ad7606_state *st) -{ - struct device *dev = st->dev; - - st->gpio_convst = devm_gpiod_get(dev, "conversion-start", - GPIOD_OUT_LOW); - if (IS_ERR(st->gpio_convst)) - return PTR_ERR(st->gpio_convst); - - st->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(st->gpio_reset)) - return PTR_ERR(st->gpio_reset); - - st->gpio_range = devm_gpiod_get_optional(dev, "range", GPIOD_OUT_LOW); - if (IS_ERR(st->gpio_range)) - return PTR_ERR(st->gpio_range); - - st->gpio_standby = devm_gpiod_get_optional(dev, "standby", - GPIOD_OUT_HIGH); - if (IS_ERR(st->gpio_standby)) - return PTR_ERR(st->gpio_standby); - - st->gpio_frstdata = devm_gpiod_get_optional(dev, "first-data", - GPIOD_IN); - if (IS_ERR(st->gpio_frstdata)) - return PTR_ERR(st->gpio_frstdata); - - if (!st->chip_info->has_oversampling) - return 0; - - st->gpio_os = devm_gpiod_get_array_optional(dev, "oversampling-ratio", - GPIOD_OUT_LOW); - return PTR_ERR_OR_ZERO(st->gpio_os); -} - -/** - * Interrupt handler - */ -static irqreturn_t ad7606_interrupt(int irq, void *dev_id) -{ - struct iio_dev *indio_dev = dev_id; - struct ad7606_state *st = iio_priv(indio_dev); - - if (iio_buffer_enabled(indio_dev)) { - schedule_work(&st->poll_work); - } else { - st->done = true; - wake_up_interruptible(&st->wq_data_avail); - } - - return IRQ_HANDLED; -}; - -static const struct iio_info ad7606_info_no_os_or_range = { - .read_raw = &ad7606_read_raw, -}; - -static const struct iio_info ad7606_info_os_and_range = { - .read_raw = &ad7606_read_raw, - .write_raw = &ad7606_write_raw, - .attrs = &ad7606_attribute_group_os_and_range, -}; - -static const struct iio_info ad7606_info_os = { - .read_raw = &ad7606_read_raw, - .write_raw = &ad7606_write_raw, - .attrs = &ad7606_attribute_group_os, -}; - -static const struct iio_info ad7606_info_range = { - .read_raw = &ad7606_read_raw, - .write_raw = &ad7606_write_raw, - .attrs = &ad7606_attribute_group_range, -}; - -int ad7606_probe(struct device *dev, int irq, void __iomem *base_address, - const char *name, unsigned int id, - const struct ad7606_bus_ops *bops) -{ - struct ad7606_state *st; - int ret; - struct iio_dev *indio_dev; - - indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); - if (!indio_dev) - return -ENOMEM; - - st = iio_priv(indio_dev); - - st->dev = dev; - mutex_init(&st->lock); - st->bops = bops; - st->base_address = base_address; - /* tied to logic low, analog input range is +/- 5V */ - st->range = 0; - st->oversampling = 1; - INIT_WORK(&st->poll_work, &ad7606_poll_bh_to_ring); - - st->reg = devm_regulator_get(dev, "avcc"); - if (IS_ERR(st->reg)) - return PTR_ERR(st->reg); - - ret = regulator_enable(st->reg); - if (ret) { - dev_err(dev, "Failed to enable specified AVcc supply\n"); - return ret; - } - - st->chip_info = &ad7606_chip_info_tbl[id]; - - ret = ad7606_request_gpios(st); - if (ret) - goto error_disable_reg; - - indio_dev->dev.parent = dev; - if (st->gpio_os) { - if (st->gpio_range) - indio_dev->info = &ad7606_info_os_and_range; - else - indio_dev->info = &ad7606_info_os; - } else { - if (st->gpio_range) - indio_dev->info = &ad7606_info_range; - else - indio_dev->info = &ad7606_info_no_os_or_range; - } - indio_dev->modes = INDIO_DIRECT_MODE; - indio_dev->name = name; - indio_dev->channels = st->chip_info->channels; - indio_dev->num_channels = st->chip_info->num_channels; - - init_waitqueue_head(&st->wq_data_avail); - - ret = ad7606_reset(st); - if (ret) - dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n"); - - ret = request_irq(irq, ad7606_interrupt, IRQF_TRIGGER_FALLING, name, - indio_dev); - if (ret) - goto error_disable_reg; - - ret = iio_triggered_buffer_setup(indio_dev, &ad7606_trigger_handler, - NULL, NULL); - if (ret) - goto error_free_irq; - - ret = iio_device_register(indio_dev); - if (ret) - goto error_unregister_ring; - - dev_set_drvdata(dev, indio_dev); - - return 0; -error_unregister_ring: - iio_triggered_buffer_cleanup(indio_dev); - -error_free_irq: - free_irq(irq, indio_dev); - -error_disable_reg: - regulator_disable(st->reg); - return ret; -} -EXPORT_SYMBOL_GPL(ad7606_probe); - -int ad7606_remove(struct device *dev, int irq) -{ - struct iio_dev *indio_dev = dev_get_drvdata(dev); - struct ad7606_state *st = iio_priv(indio_dev); - - iio_device_unregister(indio_dev); - iio_triggered_buffer_cleanup(indio_dev); - - free_irq(irq, indio_dev); - regulator_disable(st->reg); - - return 0; -} -EXPORT_SYMBOL_GPL(ad7606_remove); - -#ifdef CONFIG_PM_SLEEP - -static int ad7606_suspend(struct device *dev) -{ - struct iio_dev *indio_dev = dev_get_drvdata(dev); - struct ad7606_state *st = iio_priv(indio_dev); - - if (st->gpio_standby) { - gpiod_set_value(st->gpio_range, 1); - gpiod_set_value(st->gpio_standby, 0); - } - - return 0; -} - -static int ad7606_resume(struct device *dev) -{ - struct iio_dev *indio_dev = dev_get_drvdata(dev); - struct ad7606_state *st = iio_priv(indio_dev); - - if (st->gpio_standby) { - gpiod_set_value(st->gpio_range, st->range); - gpiod_set_value(st->gpio_standby, 1); - ad7606_reset(st); - } - - return 0; -} - -SIMPLE_DEV_PM_OPS(ad7606_pm_ops, ad7606_suspend, ad7606_resume); -EXPORT_SYMBOL_GPL(ad7606_pm_ops); - -#endif - -MODULE_AUTHOR("Michael Hennerich "); -MODULE_DESCRIPTION("Analog Devices AD7606 ADC"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/adc/ad7606.h b/drivers/staging/iio/adc/ad7606.h deleted file mode 100644 index 8618805..0000000 --- a/drivers/staging/iio/adc/ad7606.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * AD7606 ADC driver - * - * Copyright 2011 Analog Devices Inc. - * - * Licensed under the GPL-2. - */ - -#ifndef IIO_ADC_AD7606_H_ -#define IIO_ADC_AD7606_H_ - -/** - * struct ad7606_chip_info - chip specific information - * @channels: channel specification - * @num_channels: number of channels - * @has_oversampling: whether the device has oversampling support - */ - -struct ad7606_chip_info { - const struct iio_chan_spec *channels; - unsigned int num_channels; - bool has_oversampling; -}; - -/** - * struct ad7606_state - driver instance specific data - * @dev pointer to kernel device - * @chip_info entry in the table of chips that describes this device - * @reg regulator info for the the power supply of the device - * @poll_work work struct for continuously reading data from the device - * into an IIO triggered buffer - * @wq_data_avail wait queue struct for buffer mode - * @bops bus operations (SPI or parallel) - * @range voltage range selection, selects which scale to apply - * @oversampling oversampling selection - * @done marks whether reading data is done - * @base_address address from where to read data in parallel operation - * @lock protect sensor state from concurrent accesses to GPIOs - * @gpio_convst GPIO descriptor for conversion start signal (CONVST) - * @gpio_reset GPIO descriptor for device hard-reset - * @gpio_range GPIO descriptor for range selection - * @gpio_standby GPIO descriptor for stand-by signal (STBY), - * controls power-down mode of device - * @gpio_frstdata GPIO descriptor for reading from device when data - * is being read on the first channel - * @gpio_os GPIO descriptors to control oversampling on the device - * @data buffer for reading data from the device - */ - -struct ad7606_state { - struct device *dev; - const struct ad7606_chip_info *chip_info; - struct regulator *reg; - struct work_struct poll_work; - wait_queue_head_t wq_data_avail; - const struct ad7606_bus_ops *bops; - unsigned int range; - unsigned int oversampling; - bool done; - void __iomem *base_address; - - struct mutex lock; /* protect sensor state */ - struct gpio_desc *gpio_convst; - struct gpio_desc *gpio_reset; - struct gpio_desc *gpio_range; - struct gpio_desc *gpio_standby; - struct gpio_desc *gpio_frstdata; - struct gpio_descs *gpio_os; - - /* - * DMA (thus cache coherency maintenance) requires the - * transfer buffers to live in their own cache lines. - * 8 * 16-bit samples + 64-bit timestamp - */ - unsigned short data[12] ____cacheline_aligned; -}; - -/** - * struct ad7606_bus_ops - driver bus operations - * @read_block function pointer for reading blocks of data - */ -struct ad7606_bus_ops { - /* more methods added in future? */ - int (*read_block)(struct device *dev, int num, void *data); -}; - -int ad7606_probe(struct device *dev, int irq, void __iomem *base_address, - const char *name, unsigned int id, - const struct ad7606_bus_ops *bops); -int ad7606_remove(struct device *dev, int irq); - -enum ad7606_supported_device_ids { - ID_AD7605_4, - ID_AD7606_8, - ID_AD7606_6, - ID_AD7606_4 -}; - -#ifdef CONFIG_PM_SLEEP -extern const struct dev_pm_ops ad7606_pm_ops; -#define AD7606_PM_OPS (&ad7606_pm_ops) -#else -#define AD7606_PM_OPS NULL -#endif - -#endif /* IIO_ADC_AD7606_H_ */ diff --git a/drivers/staging/iio/adc/ad7606_par.c b/drivers/staging/iio/adc/ad7606_par.c deleted file mode 100644 index 8bd86e7..0000000 --- a/drivers/staging/iio/adc/ad7606_par.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * AD7606 Parallel Interface ADC driver - * - * Copyright 2011 Analog Devices Inc. - * - * Licensed under the GPL-2. - */ - -#include -#include -#include -#include -#include - -#include -#include "ad7606.h" - -static int ad7606_par16_read_block(struct device *dev, - int count, void *buf) -{ - struct iio_dev *indio_dev = dev_get_drvdata(dev); - struct ad7606_state *st = iio_priv(indio_dev); - - insw((unsigned long)st->base_address, buf, count); - - return 0; -} - -static const struct ad7606_bus_ops ad7606_par16_bops = { - .read_block = ad7606_par16_read_block, -}; - -static int ad7606_par8_read_block(struct device *dev, - int count, void *buf) -{ - struct iio_dev *indio_dev = dev_get_drvdata(dev); - struct ad7606_state *st = iio_priv(indio_dev); - - insb((unsigned long)st->base_address, buf, count * 2); - - return 0; -} - -static const struct ad7606_bus_ops ad7606_par8_bops = { - .read_block = ad7606_par8_read_block, -}; - -static int ad7606_par_probe(struct platform_device *pdev) -{ - const struct platform_device_id *id = platform_get_device_id(pdev); - struct resource *res; - void __iomem *addr; - resource_size_t remap_size; - int irq; - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "no irq: %d\n", irq); - return irq; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - addr = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(addr)) - return PTR_ERR(addr); - - remap_size = resource_size(res); - - return ad7606_probe(&pdev->dev, irq, addr, - id->name, id->driver_data, - remap_size > 1 ? &ad7606_par16_bops : - &ad7606_par8_bops); -} - -static int ad7606_par_remove(struct platform_device *pdev) -{ - return ad7606_remove(&pdev->dev, platform_get_irq(pdev, 0)); -} - -static const struct platform_device_id ad7606_driver_ids[] = { - { - .name = "ad7605-4", - .driver_data = ID_AD7605_4, - }, { - .name = "ad7606-8", - .driver_data = ID_AD7606_8, - }, { - .name = "ad7606-6", - .driver_data = ID_AD7606_6, - }, { - .name = "ad7606-4", - .driver_data = ID_AD7606_4, - }, - { } -}; - -MODULE_DEVICE_TABLE(platform, ad7606_driver_ids); - -static struct platform_driver ad7606_driver = { - .probe = ad7606_par_probe, - .remove = ad7606_par_remove, - .id_table = ad7606_driver_ids, - .driver = { - .name = "ad7606", - .pm = AD7606_PM_OPS, - }, -}; - -module_platform_driver(ad7606_driver); - -MODULE_AUTHOR("Michael Hennerich "); -MODULE_DESCRIPTION("Analog Devices AD7606 ADC"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/adc/ad7606_spi.c b/drivers/staging/iio/adc/ad7606_spi.c deleted file mode 100644 index b76ca5a..0000000 --- a/drivers/staging/iio/adc/ad7606_spi.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * AD7606 SPI ADC driver - * - * Copyright 2011 Analog Devices Inc. - * - * Licensed under the GPL-2. - */ - -#include -#include -#include -#include - -#include -#include "ad7606.h" - -#define MAX_SPI_FREQ_HZ 23500000 /* VDRIVE above 4.75 V */ - -static int ad7606_spi_read_block(struct device *dev, - int count, void *buf) -{ - struct spi_device *spi = to_spi_device(dev); - int i, ret; - unsigned short *data = buf; - __be16 *bdata = buf; - - ret = spi_read(spi, buf, count * 2); - if (ret < 0) { - dev_err(&spi->dev, "SPI read error\n"); - return ret; - } - - for (i = 0; i < count; i++) - data[i] = be16_to_cpu(bdata[i]); - - return 0; -} - -static const struct ad7606_bus_ops ad7606_spi_bops = { - .read_block = ad7606_spi_read_block, -}; - -static int ad7606_spi_probe(struct spi_device *spi) -{ - const struct spi_device_id *id = spi_get_device_id(spi); - - return ad7606_probe(&spi->dev, spi->irq, NULL, - id->name, id->driver_data, - &ad7606_spi_bops); -} - -static int ad7606_spi_remove(struct spi_device *spi) -{ - return ad7606_remove(&spi->dev, spi->irq); -} - -static const struct spi_device_id ad7606_id[] = { - {"ad7605-4", ID_AD7605_4}, - {"ad7606-8", ID_AD7606_8}, - {"ad7606-6", ID_AD7606_6}, - {"ad7606-4", ID_AD7606_4}, - {} -}; -MODULE_DEVICE_TABLE(spi, ad7606_id); - -static struct spi_driver ad7606_driver = { - .driver = { - .name = "ad7606", - .pm = AD7606_PM_OPS, - }, - .probe = ad7606_spi_probe, - .remove = ad7606_spi_remove, - .id_table = ad7606_id, -}; -module_spi_driver(ad7606_driver); - -MODULE_AUTHOR("Michael Hennerich "); -MODULE_DESCRIPTION("Analog Devices AD7606 ADC"); -MODULE_LICENSE("GPL v2"); -- 2.7.4