Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
From: Eddie James <eajames@linux.ibm.com>
To: linux-iio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, joel@jms.id.au, lars@metafoo.de,
	knaack.h@gmx.de, jic23@kernel.org,
	Christopher Bostic <cbostic@linux.vnet.ibm.com>,
	Eddie James <eajames@linux.ibm.com>
Subject: [PATCH v3 2/3] iio: dps310: Temperature measurement errata
Date: Wed, 15 May 2019 13:41:16 -0500
Message-ID: <1557945677-12838-3-git-send-email-eajames@linux.ibm.com> (raw)
In-Reply-To: <1557945677-12838-1-git-send-email-eajames@linux.ibm.com>

From: Christopher Bostic <cbostic@linux.vnet.ibm.com>

Add a manufacturer's suggested workaround to deal with early revisions
of chip that don't indicate correct temperature. Readings can be in the
~60C range when they should be in the ~20's.

Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
 drivers/iio/pressure/dps310.c | 52 +++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 50 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/pressure/dps310.c b/drivers/iio/pressure/dps310.c
index 9acfccb..a093e3a 100644
--- a/drivers/iio/pressure/dps310.c
+++ b/drivers/iio/pressure/dps310.c
@@ -53,7 +53,6 @@
 #define DPS310_RESET		0x0c
 #define  DPS310_RESET_MAGIC	0x09
 #define DPS310_COEF_BASE	0x10
-#define DPS310_COEF_SRC		0x28
 
 /* Make sure sleep time is <= 20ms for usleep_range */
 #define DPS310_POLL_SLEEP_US(t)		min(20000, (t) / 8)
@@ -234,6 +233,10 @@ static bool dps310_is_writeable_reg(struct device *dev, unsigned int reg)
 	case DPS310_MEAS_CFG:
 	case DPS310_CFG_REG:
 	case DPS310_RESET:
+	/* No documentation available on the registers below */
+	case 0x0e:
+	case 0x0f:
+	case 0x62:
 		return true;
 	default:
 		return false;
@@ -250,6 +253,7 @@ static bool dps310_is_volatile_reg(struct device *dev, unsigned int reg)
 	case DPS310_TMP_B1:
 	case DPS310_TMP_B2:
 	case DPS310_MEAS_CFG:
+	case 0x32:	/* No documentation available on this register */
 		return true;
 	default:
 		return false;
@@ -360,7 +364,7 @@ static void dps310_reset(void *action_data)
 	.writeable_reg = dps310_is_writeable_reg,
 	.volatile_reg = dps310_is_volatile_reg,
 	.cache_type = REGCACHE_RBTREE,
-	.max_register = DPS310_COEF_SRC,
+	.max_register = 0x62, /* No documentation available on this register */
 };
 
 static const struct iio_info dps310_info = {
@@ -368,6 +372,46 @@ static void dps310_reset(void *action_data)
 	.write_raw = dps310_write_raw,
 };
 
+/*
+ * Some verions of chip will read temperatures in the ~60C range when
+ * its actually ~20C. This is the manufacturer recommended workaround
+ * to correct the issue. The registers used below are undocumented.
+ */
+static int dps310_temp_workaround(struct dps310_data *data)
+{
+	int rc;
+	int reg;
+
+	rc = regmap_read(data->regmap, 0x32, &reg);
+	if (rc < 0)
+		return rc;
+
+	/*
+	 * If bit 1 is set then the device is okay, and the workaround does not
+	 * need to be applied
+	 */
+	if (reg & BIT(1))
+		return 0;
+
+	rc = regmap_write(data->regmap, 0x0e, 0xA5);
+	if (rc < 0)
+		return rc;
+
+	rc = regmap_write(data->regmap, 0x0f, 0x96);
+	if (rc < 0)
+		return rc;
+
+	rc = regmap_write(data->regmap, 0x62, 0x02);
+	if (rc < 0)
+		return rc;
+
+	rc = regmap_write(data->regmap, 0x0e, 0x00);
+	if (rc < 0)
+		return rc;
+
+	return regmap_write(data->regmap, 0x0f, 0x00);
+}
+
 static int dps310_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
@@ -439,6 +483,10 @@ static int dps310_probe(struct i2c_client *client,
 	if (rc < 0)
 		return rc;
 
+	rc = dps310_temp_workaround(data);
+	if (rc < 0)
+		return rc;
+
 	rc = devm_iio_device_register(&client->dev, iio);
 	if (rc)
 		return rc;
-- 
1.8.3.1


  parent reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-15 18:41 [PATCH v3 0/3] iio: Add driver for Infineon DPS310 Eddie James
2019-05-15 18:41 ` [PATCH v3 1/3] " Eddie James
2019-05-18 10:42   ` Jonathan Cameron
2019-05-15 18:41 ` Eddie James [this message]
2019-05-18 10:43   ` [PATCH v3 2/3] iio: dps310: Temperature measurement errata Jonathan Cameron
2019-05-15 18:41 ` [PATCH v3 3/3] iio: dps310: Add pressure sensing capability Eddie James
2019-05-18 10:45   ` Jonathan Cameron

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1557945677-12838-3-git-send-email-eajames@linux.ibm.com \
    --to=eajames@linux.ibm.com \
    --cc=cbostic@linux.vnet.ibm.com \
    --cc=jic23@kernel.org \
    --cc=joel@jms.id.au \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org linux-iio@archiver.kernel.org
	public-inbox-index linux-iio


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/ public-inbox