Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v4 0/3] iio: Add driver for Infineon DPS310
@ 2019-05-21  2:13 Eddie James
  2019-05-21  2:13 ` [PATCH v4 1/3] " Eddie James
                   ` (2 more replies)
  0 siblings, 3 replies; 7+ messages in thread
From: Eddie James @ 2019-05-21  2:13 UTC (permalink / raw)
  To: linux-iio; +Cc: linux-kernel, joel, lars, knaack.h, jic23, Eddie James

The DPS310 is a temperature and pressure sensor. It can be accessed over i2c
and SPI.

The driver supports polled measurement of temperature and pressure over i2c
only.

Changes since v3:
 - Correct spacing in Kconfig
 - Safer conversion from s64 to int

Changes since v2:
 - Switch to processed rather than raw for both pressure and temperature
 - Add locking around writing frequency/sampling rates and sensor reads
 - Further cleanup

Changes since v1:
 - Switch to wait for temperature/pressure sensor ready
 - Various cleanup

Christopher Bostic (1):
  iio: dps310: Temperature measurement errata

Eddie James (1):
  iio: dps310: Add pressure sensing capability

Joel Stanley (1):
  iio: Add driver for Infineon DPS310

 MAINTAINERS                   |   6 +
 drivers/iio/pressure/Kconfig  |  11 +
 drivers/iio/pressure/Makefile |   1 +
 drivers/iio/pressure/dps310.c | 827 ++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 845 insertions(+)
 create mode 100644 drivers/iio/pressure/dps310.c

-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, back to index

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-21  2:13 [PATCH v4 0/3] iio: Add driver for Infineon DPS310 Eddie James
2019-05-21  2:13 ` [PATCH v4 1/3] " Eddie James
2019-05-26 17:34   ` Jonathan Cameron
2019-05-21  2:13 ` [PATCH v4 2/3] iio: dps310: Temperature measurement errata Eddie James
2019-05-26 17:34   ` Jonathan Cameron
2019-05-21  2:13 ` [PATCH v4 3/3] iio: dps310: Add pressure sensing capability Eddie James
2019-05-26 17:35   ` Jonathan Cameron

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org linux-iio@archiver.kernel.org
	public-inbox-index linux-iio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/ public-inbox