From: Jeff LaBundy <jeff@labundy.com>
To: lee.jones@linaro.org, dmitry.torokhov@gmail.com,
jdelvare@suse.com, linux@roeck-us.net, thierry.reding@gmail.com,
jic23@kernel.org, devicetree@vger.kernel.org
Cc: linux-input@vger.kernel.org, linux-hwmon@vger.kernel.org,
u.kleine-koenig@pengutronix.de, linux-pwm@vger.kernel.org,
knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
linux-iio@vger.kernel.org, robh+dt@kernel.org,
mark.rutland@arm.com, Jeff LaBundy <jeff@labundy.com>
Subject: [PATCH 4/8] hwmon: Add support for Azoteq IQS620AT temperature sensor
Date: Sun, 20 Oct 2019 23:11:19 -0500 [thread overview]
Message-ID: <1571631083-4962-5-git-send-email-jeff@labundy.com> (raw)
In-Reply-To: <1571631083-4962-1-git-send-email-jeff@labundy.com>
This patch adds support for the Azoteq IQS620AT temperature sensor,
capable of reporting its absolute die temperature.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
---
drivers/hwmon/Kconfig | 12 +++++-
drivers/hwmon/Makefile | 1 +
drivers/hwmon/iqs620at-temp.c | 96 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 108 insertions(+), 1 deletion(-)
create mode 100644 drivers/hwmon/iqs620at-temp.c
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 13a6b4a..3e56be6 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -385,6 +385,16 @@ config SENSORS_ATXP1
This driver can also be built as a module. If so, the module
will be called atxp1.
+config SENSORS_IQS620AT
+ tristate "Azoteq IQS620AT temperature sensor"
+ depends on MFD_IQS62X
+ help
+ Say Y here if you want to build support for the Azoteq IQS620AT
+ temperature sensor.
+
+ To compile this driver as a module, choose M here: the module
+ will be called iqs620at-temp.
+
config SENSORS_DS620
tristate "Dallas Semiconductor DS620"
depends on I2C
@@ -1593,7 +1603,7 @@ config SENSORS_ADS7871
config SENSORS_AMC6821
tristate "Texas Instruments AMC6821"
- depends on I2C
+ depends on I2C
help
If you say yes here you get support for the Texas Instruments
AMC6821 hardware monitoring chips.
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 40c036e..2360add 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -83,6 +83,7 @@ obj-$(CONFIG_SENSORS_IIO_HWMON) += iio_hwmon.o
obj-$(CONFIG_SENSORS_INA209) += ina209.o
obj-$(CONFIG_SENSORS_INA2XX) += ina2xx.o
obj-$(CONFIG_SENSORS_INA3221) += ina3221.o
+obj-$(CONFIG_SENSORS_IQS620AT) += iqs620at-temp.o
obj-$(CONFIG_SENSORS_IT87) += it87.o
obj-$(CONFIG_SENSORS_JC42) += jc42.o
obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
diff --git a/drivers/hwmon/iqs620at-temp.c b/drivers/hwmon/iqs620at-temp.c
new file mode 100644
index 0000000..0af49b6
--- /dev/null
+++ b/drivers/hwmon/iqs620at-temp.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS620AT Temperature Sensor
+ *
+ * Copyright (C) 2019
+ * Author: Jeff LaBundy <jeff@labundy.com>
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/kernel.h>
+#include <linux/mfd/iqs62x.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define IQS620_TEMP_UI_OUT 0x1A
+
+static umode_t iqs620_temp_is_visible(const void *drvdata,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ if (type != hwmon_temp || attr != hwmon_temp_input)
+ return 0;
+
+ return 0444;
+}
+
+static int iqs620_temp_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct iqs62x_core *iqs62x = dev_get_drvdata(dev);
+ int error;
+ __le16 val_buf;
+
+ if (type != hwmon_temp || attr != hwmon_temp_input)
+ return -EINVAL;
+
+ error = regmap_raw_read(iqs62x->map, IQS620_TEMP_UI_OUT, &val_buf,
+ sizeof(val_buf));
+ if (error)
+ return error;
+
+ *val = (le16_to_cpu(val_buf) - 100) * 1000;
+
+ return 0;
+}
+
+static const struct hwmon_ops iqs620_temp_ops = {
+ .is_visible = iqs620_temp_is_visible,
+ .read = iqs620_temp_read,
+};
+
+static const struct hwmon_channel_info *iqs620_temp_channel_info[] = {
+ HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
+ HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
+ NULL
+};
+
+static const struct hwmon_chip_info iqs620_temp_chip_info = {
+ .ops = &iqs620_temp_ops,
+ .info = iqs620_temp_channel_info,
+};
+
+static int iqs620_temp_probe(struct platform_device *pdev)
+{
+ struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
+ struct device *hdev;
+ int error = 0;
+
+ hdev = devm_hwmon_device_register_with_info(&pdev->dev,
+ iqs62x->dev_desc->dev_name,
+ iqs62x,
+ &iqs620_temp_chip_info,
+ NULL);
+ if (IS_ERR(hdev)) {
+ error = PTR_ERR(hdev);
+ dev_err(&pdev->dev, "Failed to register device: %d\n", error);
+ }
+
+ return error;
+}
+
+static struct platform_driver iqs620_temp_platform_driver = {
+ .driver = {
+ .name = IQS620_DRV_NAME_TEMP,
+ },
+ .probe = iqs620_temp_probe,
+};
+module_platform_driver(iqs620_temp_platform_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS620AT Temperature Sensor");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" IQS620_DRV_NAME_TEMP);
--
2.7.4
next prev parent reply other threads:[~2019-10-21 4:19 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-21 4:11 [PATCH 0/8] Add support for Azoteq IQS620A/621/622/624/625 Jeff LaBundy
2019-10-21 4:11 ` [PATCH 1/8] dt-bindings: mfd: iqs62x: Add bindings Jeff LaBundy
2019-10-22 11:00 ` Jonathan Cameron
2019-10-23 3:36 ` Jeff LaBundy
2019-10-23 9:30 ` Lee Jones
2019-10-24 2:38 ` Jeff LaBundy
2019-10-21 4:11 ` [PATCH 2/8] mfd: Add support for Azoteq IQS620A/621/622/624/625 Jeff LaBundy
2019-10-31 13:44 ` Lee Jones
2019-10-31 18:42 ` Dmitry Torokhov
2019-11-01 4:59 ` Jeff LaBundy
2019-11-01 8:56 ` Lee Jones
2019-11-02 2:49 ` Jeff LaBundy
2019-10-21 4:11 ` [PATCH 3/8] input: keyboard: " Jeff LaBundy
2019-10-23 0:22 ` Dmitry Torokhov
2019-10-23 1:29 ` Jeff LaBundy
2019-10-23 23:08 ` Dmitry Torokhov
2019-10-21 4:11 ` Jeff LaBundy [this message]
2019-10-21 15:38 ` [PATCH 4/8] hwmon: Add support for Azoteq IQS620AT temperature sensor Guenter Roeck
2019-10-22 2:26 ` Jeff LaBundy
2019-10-22 3:22 ` Guenter Roeck
2019-10-22 11:38 ` Jonathan Cameron
2019-10-23 2:04 ` Jeff LaBundy
2019-10-21 4:11 ` [PATCH 5/8] pwm: Add support for Azoteq IQS620A PWM generator Jeff LaBundy
2019-10-21 7:34 ` Uwe Kleine-König
2019-10-22 4:36 ` Jeff LaBundy
2019-10-22 6:54 ` Uwe Kleine-König
2019-10-23 2:45 ` Jeff LaBundy
2019-10-23 7:23 ` Uwe Kleine-König
2019-10-24 3:02 ` Jeff LaBundy
2019-10-21 4:11 ` [PATCH 6/8] iio: light: Add support for Azoteq IQS621 ambient light sensor Jeff LaBundy
2019-10-22 11:23 ` Jonathan Cameron
2019-10-23 2:59 ` Jeff LaBundy
2019-10-21 4:11 ` [PATCH 7/8] iio: proximity: Add support for Azoteq IQS622 proximity sensor Jeff LaBundy
2019-10-22 11:23 ` Jonathan Cameron
2019-10-23 3:09 ` Jeff LaBundy
2019-10-21 4:11 ` [PATCH 8/8] iio: position: Add support for Azoteq IQS624/625 angle sensor Jeff LaBundy
2019-10-22 11:28 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1571631083-4962-5-git-send-email-jeff@labundy.com \
--to=jeff@labundy.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jdelvare@suse.com \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mark.rutland@arm.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).