linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeff LaBundy <jeff@labundy.com>
To: "lee.jones@linaro.org" <lee.jones@linaro.org>,
	"dmitry.torokhov@gmail.com" <dmitry.torokhov@gmail.com>,
	"thierry.reding@gmail.com" <thierry.reding@gmail.com>,
	"jic23@kernel.org" <jic23@kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>
Cc: "linux-input@vger.kernel.org" <linux-input@vger.kernel.org>,
	"u.kleine-koenig@pengutronix.de" <u.kleine-koenig@pengutronix.de>,
	"linux-pwm@vger.kernel.org" <linux-pwm@vger.kernel.org>,
	"knaack.h@gmx.de" <knaack.h@gmx.de>,
	"lars@metafoo.de" <lars@metafoo.de>,
	"pmeerw@pmeerw.net" <pmeerw@pmeerw.net>,
	"linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	Jeff LaBundy <jeff@labundy.com>
Subject: [PATCH v3 0/7] Add support for Azoteq IQS620A/621/622/624/625
Date: Mon, 6 Jan 2020 00:47:59 +0000	[thread overview]
Message-ID: <1578271620-2159-1-git-send-email-jeff@labundy.com> (raw)

This series adds support for the Azoteq IQS620A, IQS621, IQS622, IQS624 and
IQS625 multi-function sensors. Each device integrates numerous sensing tech-
nologies in a single package.

A multi-function device (MFD) driver supports core functions common to all
devices, including device identification, firmware, interrupt handling and
runtime power management. The MFD driver is also responsible for adding all
product-specific sub-devices.

Each device supports self-capacitive, Hall-effect, and (in some cases) mutual-
inductive sensing. These functions represent keys or switches and are supported
by an input driver that covers all five devices. An assortment of pwm and iio
drivers supports device-specific functions including ambient light and angular
position sensing.

This series was tested using the following development hardware: IQS620AEV04,
IQS621EV04, IQS622EV04 and IQS624/5EV04.

Jeff LaBundy (7):
  dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625
  mfd: Add support for Azoteq IQS620A/621/622/624/625
  input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
  pwm: Add support for Azoteq IQS620A PWM generator
  iio: temperature: Add support for Azoteq IQS620AT temperature sensor
  iio: light: Add support for Azoteq IQS621/622 ambient light sensors
  iio: position: Add support for Azoteq IQS624/625 angle sensors

 .../devicetree/bindings/input/iqs62x-keys.yaml     | 132 +++++
 Documentation/devicetree/bindings/mfd/iqs62x.yaml  | 179 ++++++
 .../devicetree/bindings/pwm/iqs620a-pwm.yaml       |  32 ++
 drivers/iio/Kconfig                                |   1 +
 drivers/iio/Makefile                               |   1 +
 drivers/iio/light/Kconfig                          |  10 +
 drivers/iio/light/Makefile                         |   1 +
 drivers/iio/light/iqs621-als.c                     | 614 ++++++++++++++++++++
 drivers/iio/position/Kconfig                       |  19 +
 drivers/iio/position/Makefile                      |   7 +
 drivers/iio/position/iqs624-pos.c                  | 284 +++++++++
 drivers/iio/temperature/Kconfig                    |  10 +
 drivers/iio/temperature/Makefile                   |   1 +
 drivers/iio/temperature/iqs620at-temp.c            |  97 ++++
 drivers/input/keyboard/Kconfig                     |  10 +
 drivers/input/keyboard/Makefile                    |   1 +
 drivers/input/keyboard/iqs62x-keys.c               | 340 +++++++++++
 drivers/mfd/Kconfig                                |  13 +
 drivers/mfd/Makefile                               |   3 +
 drivers/mfd/iqs62x-core.c                          | 639 +++++++++++++++++++++
 drivers/mfd/iqs62x-tables.c                        | 438 ++++++++++++++
 drivers/pwm/Kconfig                                |  10 +
 drivers/pwm/Makefile                               |   1 +
 drivers/pwm/pwm-iqs620a.c                          | 254 ++++++++
 include/linux/mfd/iqs62x.h                         | 146 +++++
 25 files changed, 3243 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/iqs62x-keys.yaml
 create mode 100644 Documentation/devicetree/bindings/mfd/iqs62x.yaml
 create mode 100644 Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml
 create mode 100644 drivers/iio/light/iqs621-als.c
 create mode 100644 drivers/iio/position/Kconfig
 create mode 100644 drivers/iio/position/Makefile
 create mode 100644 drivers/iio/position/iqs624-pos.c
 create mode 100644 drivers/iio/temperature/iqs620at-temp.c
 create mode 100644 drivers/input/keyboard/iqs62x-keys.c
 create mode 100644 drivers/mfd/iqs62x-core.c
 create mode 100644 drivers/mfd/iqs62x-tables.c
 create mode 100644 drivers/pwm/pwm-iqs620a.c
 create mode 100644 include/linux/mfd/iqs62x.h

--
2.7.4


             reply	other threads:[~2020-01-06  0:48 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-06  0:47 Jeff LaBundy [this message]
2020-01-06  0:48 ` [PATCH v3 1/7] dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625 Jeff LaBundy
2020-01-06  0:48 ` [PATCH v3 2/7] mfd: Add support " Jeff LaBundy
2020-01-06  0:48 ` [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator Jeff LaBundy
2020-01-14  8:08   ` Uwe Kleine-König
2020-01-15  3:29     ` Jeff LaBundy
2020-01-15  7:33       ` Uwe Kleine-König
2020-01-16  3:34         ` Jeff LaBundy
2020-01-06  0:48 ` [PATCH v3 3/7] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625 Jeff LaBundy
2020-01-06  0:48 ` [PATCH v3 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor Jeff LaBundy
2020-01-06  0:48 ` [PATCH v3 6/7] iio: light: Add support for Azoteq IQS621/622 ambient light sensors Jeff LaBundy
2020-01-06  0:48 ` [PATCH v3 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors Jeff LaBundy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1578271620-2159-1-git-send-email-jeff@labundy.com \
    --to=jeff@labundy.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=lee.jones@linaro.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).