From: Sandeep Singh <Sandeep.Singh@amd.com>
To: jikos@kernel.org, benjamin.tissoires@redhat.com,
linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
srinivas.pandruvada@linux.intel.com, jic23@kernel.org,
linux-iio@vger.kernel.org, Nehal-bakulchandra.Shah@amd.com
Cc: Shyam-sundar.S-k@amd.com, Sandeep Singh <sandeep.singh@amd.com>
Subject: [PATCH v3 0/5] SFH: Add Support for AMD Sensor Fusion Hub
Date: Wed, 12 Feb 2020 08:26:32 +0530 [thread overview]
Message-ID: <1581476197-25854-1-git-send-email-Sandeep.Singh@amd.com> (raw)
From: Sandeep Singh <sandeep.singh@amd.com>
AMD SFH(Sensor Fusion Hub) is HID based driver.SFH FW
is part of MP2 processor (MP2 which is an ARM® Cortex-M4
core based co-processor to x86) and it runs on MP2 where
in driver resides on X86.The driver functionalities are
divided into three parts:-
1: amd-mp2-pcie:- This module will communicate with MP2 FW and
provide that data into DRAM.
2: Client driver :- This part for driver will use dram data and
convert that data into HID format based on
HID reports.
3: Transport driver :- This part of driver will communicate with
HID core. Communication between devices and
HID core is mostly done via HID reports
In terms of architecture it is much more reassembles like
ISH(Intel Integrated Sensor Hub). However the major difference
is all the hid reports are generated as part of kernel driver.
AMD SFH driver taken reference from ISH in terms of
design and functionalities at fewer location.
AMD sensor fusion Hub is part of a SOC 17h family based platforms.
The solution is working well on several OEM products.
AMD SFH uses HID over PCIe bus.
Sandeep Singh (5):
SFH: Add maintainers and documentation for AMD SFH based on HID
framework
SFH: PCI driver to add support of AMD sensor fusion Hub using HID
framework
SFH: Transport Driver to add support of AMD Sensor Fusion Hub (SFH)
SFH: Add debugfs support to AMD Sensor Fusion Hub
SFH: Create HID report to Enable support of AMD sensor fusion Hub
(SFH)
Changes since v1:
-Fix auto build test warnings
-Fix warnings captured using smatch
-Changes suggested by Dan Carpenter
Links of the review comments for v1:
[1] https://patchwork.kernel.org/patch/11325163/
[2] https://patchwork.kernel.org/patch/11325167/
[3] https://patchwork.kernel.org/patch/11325171/
[4] https://patchwork.kernel.org/patch/11325187/
Changes since v2:
-Debugfs divided into another patch
-Fix some cosmetic changes
-Fix for review comments
Reported and Suggested by:- Srinivas Pandruvada
Links of the review comments for v2:
[1] https://patchwork.kernel.org/patch/11355491/
[2] https://patchwork.kernel.org/patch/11355495/
[3] https://patchwork.kernel.org/patch/11355499/
[4] https://patchwork.kernel.org/patch/11355503/
Documentation/hid/amd-sfh-hid.rst | 160 +++++
MAINTAINERS | 8 +
drivers/hid/Kconfig | 2 +
drivers/hid/Makefile | 1 +
drivers/hid/amd-sfh-hid/Kconfig | 20 +
drivers/hid/amd-sfh-hid/Makefile | 17 +
drivers/hid/amd-sfh-hid/amd_mp2_pcie.c | 243 ++++++++
drivers/hid/amd-sfh-hid/amd_mp2_pcie.h | 177 ++++++
drivers/hid/amd-sfh-hid/amdsfh-debugfs.c | 250 ++++++++
drivers/hid/amd-sfh-hid/amdsfh-debugfs.h | 14 +
drivers/hid/amd-sfh-hid/amdsfh-hid-client.c | 260 +++++++++
drivers/hid/amd-sfh-hid/amdsfh-hid.c | 179 ++++++
drivers/hid/amd-sfh-hid/amdsfh-hid.h | 85 +++
.../hid_descriptor/amd_sfh_hid_descriptor.c | 275 +++++++++
.../hid_descriptor/amd_sfh_hid_descriptor.h | 125 ++++
.../hid_descriptor/amd_sfh_hid_report_descriptor.h | 642 +++++++++++++++++++++
16 files changed, 2458 insertions(+)
create mode 100644 Documentation/hid/amd-sfh-hid.rst
create mode 100644 drivers/hid/amd-sfh-hid/Kconfig
create mode 100644 drivers/hid/amd-sfh-hid/Makefile
create mode 100644 drivers/hid/amd-sfh-hid/amd_mp2_pcie.c
create mode 100644 drivers/hid/amd-sfh-hid/amd_mp2_pcie.h
create mode 100644 drivers/hid/amd-sfh-hid/amdsfh-debugfs.c
create mode 100644 drivers/hid/amd-sfh-hid/amdsfh-debugfs.h
create mode 100644 drivers/hid/amd-sfh-hid/amdsfh-hid-client.c
create mode 100644 drivers/hid/amd-sfh-hid/amdsfh-hid.c
create mode 100644 drivers/hid/amd-sfh-hid/amdsfh-hid.h
create mode 100644 drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_descriptor.c
create mode 100644 drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_descriptor.h
create mode 100644 drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_report_descriptor.h
--
2.7.4
next reply other threads:[~2020-02-12 2:57 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-12 2:56 Sandeep Singh [this message]
2020-02-12 2:56 ` [PATCH v3 1/5] SFH: Add maintainers and documentation for AMD SFH based on HID framework Sandeep Singh
2020-02-12 2:56 ` [PATCH v3 2/5] SFH: PCI driver to add support of AMD sensor fusion Hub using " Sandeep Singh
2020-02-12 2:56 ` [PATCH v3 3/5] SFH: Transport Driver to add support of AMD Sensor Fusion Hub (SFH) Sandeep Singh
2020-02-12 2:56 ` [PATCH v3 4/5] SFH: Add debugfs support to AMD Sensor Fusion Hub Sandeep Singh
2020-02-12 2:56 ` [PATCH v3 5/5] SFH: Create HID report to Enable support of AMD sensor fusion Hub (SFH) Sandeep Singh
2020-02-12 14:45 ` [PATCH v3 0/5] SFH: Add Support for AMD Sensor Fusion Hub Hans de Goede
2020-02-13 14:56 ` Benjamin Tissoires
2020-02-14 4:40 ` Srinivas Pandruvada
2020-02-14 10:04 ` Shah, Nehal-bakulchandra
2020-02-14 11:11 ` Benjamin Tissoires
2020-02-19 15:04 ` Shah, Nehal-bakulchandra
2020-02-21 12:47 ` Jiri Kosina
2020-02-14 11:11 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1581476197-25854-1-git-send-email-Sandeep.Singh@amd.com \
--to=sandeep.singh@amd.com \
--cc=Nehal-bakulchandra.Shah@amd.com \
--cc=Shyam-sundar.S-k@amd.com \
--cc=benjamin.tissoires@redhat.com \
--cc=jic23@kernel.org \
--cc=jikos@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=srinivas.pandruvada@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).