Re: [PATCH v6 3/3] iio: adc: mt6360: Add ADC driver for MT6360

Re: [PATCH v6 3/3] iio: adc: mt6360: Add ADC driver for MT6360

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2517 bytes --]

Hi Gene,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on iio/togreg]
[also build test ERROR on robh/for-next soc/for-next v5.9-rc7 next-20200929]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Gene-Chen/iio-adc-mt6360-Add-ADC-driver-for-MT6360/20200930-165619
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
config: sh-allmodconfig (attached as .config)
compiler: sh4-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/c5eda86258a6e9fc21bae8a1e0cb3bc9f54ca87e
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Gene-Chen/iio-adc-mt6360-Add-ADC-driver-for-MT6360/20200930-165619
        git checkout c5eda86258a6e9fc21bae8a1e0cb3bc9f54ca87e
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=sh 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> drivers/iio/adc/mt6360-adc.c:212:3: error: 'const struct iio_info' has no member named 'read_label'; did you mean 'read_raw'?
     212 |  .read_label = mt6360_adc_read_label,
         |   ^~~~~~~~~~
         |   read_raw
>> drivers/iio/adc/mt6360-adc.c:212:16: error: initialization of 'int (*)(struct iio_dev *, const struct iio_chan_spec *, int,  int *, int *, long int)' from incompatible pointer type 'int (*)(struct iio_dev *, const struct iio_chan_spec *, char *)' [-Werror=incompatible-pointer-types]
     212 |  .read_label = mt6360_adc_read_label,
         |                ^~~~~~~~~~~~~~~~~~~~~
   drivers/iio/adc/mt6360-adc.c:212:16: note: (near initialization for 'mt6360_adc_iio_info.read_raw_multi')
   cc1: some warnings being treated as errors

vim +212 drivers/iio/adc/mt6360-adc.c

   209	
   210	static const struct iio_info mt6360_adc_iio_info = {
   211		.read_raw = mt6360_adc_read_raw,
 > 212		.read_label = mt6360_adc_read_label,
   213	};
   214	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 52783 bytes --]

[PATCH v6 0/3] iio: adc: mt6360: Add ADC driver for MT6360

[Gene Chen]

This patch series add MT6360 ADC support contains driver, testing document
and binding document

Gene Chen (2)
  dt-bindings: iio: adc: add bindings doc for MT6360 ADC
  Documentation: ABI: testing: mt6360: Add ADC sysfs guideline
  iio: adc: mt6360: Add ADC driver for MT6360

 Documentation/ABI/testing/sysfs-bus-iio-adc-mt6360                 |   78 ++
 Documentation/devicetree/bindings/iio/adc/mediatek,mt6360-adc.yaml |   34 
 drivers/iio/adc/Kconfig                                            |   11 
 drivers/iio/adc/Makefile                                           |    1 
 drivers/iio/adc/mt6360-adc.c                                       |  362 ++++++++++
 5 files changed, 486 insertions(+)

changelogs between v1 & v2
 - adc: use IIO_CHAN_INFO_PROCESSED only
 - adc: use devm_iio_triggered_buffer_setup
 - adc: use use s64 to record timestamp

changelogs between v2 & v3
 - Rearrange include file order by alphabet
 - Set line length constraint below 100
 - Add Document for testing adc sysfs node guideline
 - Set compiler 64 bit aligned when handle iio timestamp

changelogs between v3 & v4
 - Fix sysfs guideline description
 - Replace iio channel processed by raw/scale/offset
 - Add comment of read adc flow for special HW design

changelogs between v4 & v5
 - Rename dt-bindings aligned to file name
 - Aligned sysfs node name with driver and add VBUSDIVX description
 - Add ADC channel sysfs node "*_labels"

changelogs between v5 & v6
 - Memset aligned adc data
 - Remove strong casting void pointer

[PATCH v6 1/3] dt-bindings: iio: adc: add bindings doc for MT6360 ADC

[Gene Chen]

From: Gene Chen <gene_chen@richtek.com>

This change adds the binding doc for the MT6360 ADC.

Signed-off-by: Gene Chen <gene_chen@richtek.com>
---
 .../bindings/iio/adc/mediatek,mt6360-adc.yaml      | 34 ++++++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/mediatek,mt6360-adc.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt6360-adc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt6360-adc.yaml
new file mode 100644
index 0000000..a7350ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt6360-adc.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/mediatek,mt6360-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6360 and similar ADCs
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  Family of simple ADCs with i2c interface and internal references.
+
+properties:
+  compatible:
+    const: mediatek,mt6360-adc
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    adc {
+      compatible = "mediatek,mt6360-adc";
+      #io-channel-cells = <1>;
+    };
+...
-- 
2.7.4

[PATCH v6 2/3] Documentation: ABI: testing: mt6360: Add ADC sysfs guideline

[Gene Chen]

From: Gene Chen <gene_chen@richtek.com>

Add ABI documentation for mt6360 ADC sysfs interfaces.

Signed-off-by: Gene Chen <gene_chen@richtek.com>
---
 Documentation/ABI/testing/sysfs-bus-iio-adc-mt6360 | 78 ++++++++++++++++++++++
 1 file changed, 78 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-mt6360

diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-mt6360 b/Documentation/ABI/testing/sysfs-bus-iio-adc-mt6360
new file mode 100644
index 0000000..e5a7b1c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-mt6360
@@ -0,0 +1,78 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage0_raw
+KernelVersion:	5.8.0
+Contact:	gene_chen@richtek.com
+Description:
+		Indicated MT6360 USBID ADC which connected to connector ID pin.
+		Calculating with scale and offset returns voltage in uV
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage1_raw
+KernelVersion:	5.8.0
+Contact:	gene_chen@richtek.com
+Description:
+		Indicated MT6360 VBUS ADC with lower accuracy(+-75mA)
+		higher measure range(1~22mV)
+		Calculating with scale and offset returns voltage in uV
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage2_raw
+KernelVersion:	5.8.0
+Contact:	gene_chen@richtek.com
+Description:
+		Indicated MT6360 VBUS ADC with higher accuracy(+-30mA)
+		lower measure range(1~9.76V)
+		Calculating with scale and offset returns voltage in uV
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage3_raw
+KernelVersion:	5.8.0
+Contact:	gene_chen@richtek.com
+Description:
+		Indicated MT6360 VSYS ADC
+		Calculating with scale and offset returns voltage in uV
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage4_raw
+KernelVersion:	5.8.0
+Contact:	gene_chen@richtek.com
+Description:
+		Indicated MT6360 VBAT ADC
+		Calculating with scale and offset returns voltage in uV
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_current5_raw
+KernelVersion:	5.8.0
+Contact:	gene_chen@richtek.com
+Description:
+		Indicated MT6360 IBUS ADC
+		Calculating with scale and offset returns voltage in uA
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_current6_raw
+KernelVersion:	5.8.0
+Contact:	gene_chen@richtek.com
+Description:
+		Indicated MT6360 IBAT ADC
+		Calculating with scale and offset returns voltage in uA
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_current7_raw
+KernelVersion:	5.8.0
+Contact:	gene_chen@richtek.com
+Description:
+		Indicated MT6360 CHG_VDDP ADC
+		Calculating with scale and offset returns voltage in uV
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp8_raw
+KernelVersion:	5.8.0
+Contact:	gene_chen@richtek.com
+Description:
+		Indicated MT6360 IC junction temperature
+		Calculating with scale and offset returns temperature in degree
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage9_raw
+KernelVersion:	5.8.0
+Contact:	gene_chen@richtek.com
+Description:
+		Indicated MT6360 VREF_TS ADC
+		Calculating with scale and offset returns voltage in uV
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage10_raw
+KernelVersion:	5.8.0
+Contact:	gene_chen@richtek.com
+Description:
+		Indicated MT6360 TS ADC
+		Calculating with scale and offset returns voltage in uV
-- 
2.7.4

[PATCH v6 3/3] iio: adc: mt6360: Add ADC driver for MT6360

[Gene Chen]

From: Gene Chen <gene_chen@richtek.com>

Add MT6360 ADC driver include Charger Current, Voltage, and
Temperature.

Signed-off-by: Gene Chen <gene_chen@richtek.com>
---
 drivers/iio/adc/Kconfig      |  11 ++
 drivers/iio/adc/Makefile     |   1 +
 drivers/iio/adc/mt6360-adc.c | 362 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 374 insertions(+)
 create mode 100644 drivers/iio/adc/mt6360-adc.c

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index d94dc80..a135ada 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -703,6 +703,17 @@ config MCP3911
 	  This driver can also be built as a module. If so, the module will be
 	  called mcp3911.
 
+config MEDIATEK_MT6360_ADC
+	tristate "Mediatek MT6360 ADC driver"
+	depends on MFD_MT6360
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say Y here to enable MT6360 ADC support.
+	  Integrated for System Monitoring includes
+	  is used in smartphones and tablets and supports a 11 channel
+	  general purpose ADC.
+
 config MEDIATEK_MT6577_AUXADC
 	tristate "MediaTek AUXADC driver"
 	depends on ARCH_MEDIATEK || COMPILE_TEST
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 90f94ad..5fca90a 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -65,6 +65,7 @@ obj-$(CONFIG_MAX9611) += max9611.o
 obj-$(CONFIG_MCP320X) += mcp320x.o
 obj-$(CONFIG_MCP3422) += mcp3422.o
 obj-$(CONFIG_MCP3911) += mcp3911.o
+obj-$(CONFIG_MEDIATEK_MT6360_ADC) += mt6360-adc.o
 obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o
 obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
 obj-$(CONFIG_MESON_SARADC) += meson_saradc.o
diff --git a/drivers/iio/adc/mt6360-adc.c b/drivers/iio/adc/mt6360-adc.c
new file mode 100644
index 0000000..092dcd8
--- /dev/null
+++ b/drivers/iio/adc/mt6360-adc.c
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/ktime.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define MT6360_REG_PMUCHGCTRL3	0x313
+#define MT6360_REG_PMUADCCFG	0x356
+#define MT6360_REG_PMUADCIDLET	0x358
+#define MT6360_REG_PMUADCRPT1	0x35A
+
+/* PMUCHGCTRL3 0x313 */
+#define MT6360_AICR_MASK	GENMASK(7, 2)
+#define MT6360_AICR_SHFT	2
+#define MT6360_AICR_400MA	0x6
+/* PMUADCCFG 0x356 */
+#define MT6360_ADCEN_MASK	0x8000
+/* PMUADCRPT1 0x35A */
+#define MT6360_PREFERCH_MASK	GENMASK(7, 4)
+#define MT6360_PREFERCH_SHFT	4
+#define MT6360_RPTCH_MASK	GENMASK(3, 0)
+#define MT6360_NO_PREFER	15
+
+/* Time in ms */
+#define ADC_WAIT_TIME_MS	25
+
+enum {
+	MT6360_CHAN_USBID = 0,
+	MT6360_CHAN_VBUSDIV5,
+	MT6360_CHAN_VBUSDIV2,
+	MT6360_CHAN_VSYS,
+	MT6360_CHAN_VBAT,
+	MT6360_CHAN_IBUS,
+	MT6360_CHAN_IBAT,
+	MT6360_CHAN_CHG_VDDP,
+	MT6360_CHAN_TEMP_JC,
+	MT6360_CHAN_VREF_TS,
+	MT6360_CHAN_TS,
+	MT6360_CHAN_MAX
+};
+
+struct mt6360_adc_data {
+	struct device *dev;
+	struct regmap *regmap;
+	/* Due to only one set of ADC control, this lock is used to prevent the race condition */
+	struct mutex adc_lock;
+	ktime_t last_off_timestamps[MT6360_CHAN_MAX];
+};
+
+static int mt6360_adc_read_channel(struct mt6360_adc_data *mad, int channel, int *val)
+{
+	__be16 adc_enable;
+	u8 rpt[3];
+	ktime_t start_t, predict_end_t;
+	unsigned int pre_wait_time;
+	int ret;
+
+	mutex_lock(&mad->adc_lock);
+
+	/* Select the preferred ADC channel */
+	ret = regmap_update_bits(mad->regmap, MT6360_REG_PMUADCRPT1, MT6360_PREFERCH_MASK,
+				 channel << MT6360_PREFERCH_SHFT);
+	if (ret)
+		goto out_adc_lock;
+
+	adc_enable = cpu_to_be16(MT6360_ADCEN_MASK | BIT(channel));
+	ret = regmap_raw_write(mad->regmap, MT6360_REG_PMUADCCFG, &adc_enable, sizeof(adc_enable));
+	if (ret)
+		goto out_adc_lock;
+
+	start_t = ktime_get();
+	predict_end_t = ktime_add_ms(mad->last_off_timestamps[channel], 2 * ADC_WAIT_TIME_MS);
+
+	if (ktime_after(start_t, predict_end_t))
+		pre_wait_time = ADC_WAIT_TIME_MS;
+	else
+		pre_wait_time = 3 * ADC_WAIT_TIME_MS;
+
+	msleep(pre_wait_time);
+
+	while (true) {
+		ret = regmap_raw_read(mad->regmap, MT6360_REG_PMUADCRPT1, rpt, sizeof(rpt));
+		if (ret)
+			goto out_adc_conv;
+
+		/*
+		 * There are two functions, ZCV and TypeC OTP, running ADC VBAT and TS in
+		 * background, and ADC samples are taken on a fixed frequency no matter read the
+		 * previous one or not.
+		 * To avoid conflict, We set minimum time threshold after enable ADC and
+		 * check report channel is the same.
+		 * The worst case is run the same ADC twice and background function is also running,
+		 * ADC conversion sequence is desire channel before start ADC, background ADC,
+		 * desire channel after start ADC.
+		 * So the minimum correct data is three times of typical conversion time.
+		 */
+		if ((rpt[0] & MT6360_RPTCH_MASK) == channel)
+			break;
+
+		msleep(ADC_WAIT_TIME_MS);
+	}
+
+	/* rpt[1]: ADC_HI_BYTE, rpt[2]: ADC_LOW_BYTE */
+	*val = rpt[1] << 8 | rpt[2];
+	ret = IIO_VAL_INT;
+
+out_adc_conv:
+	/* Only keep ADC enable */
+	adc_enable = cpu_to_be16(MT6360_ADCEN_MASK);
+	regmap_raw_write(mad->regmap, MT6360_REG_PMUADCCFG, &adc_enable, sizeof(adc_enable));
+	mad->last_off_timestamps[channel] = ktime_get();
+	/* Config prefer channel to NO_PREFER */
+	regmap_update_bits(mad->regmap, MT6360_REG_PMUADCRPT1, MT6360_PREFERCH_MASK,
+			   MT6360_NO_PREFER << MT6360_PREFERCH_SHFT);
+out_adc_lock:
+	mutex_unlock(&mad->adc_lock);
+
+	return ret;
+}
+
+static int mt6360_adc_read_scale(struct mt6360_adc_data *mad, int channel, int *val, int *val2)
+{
+	unsigned int regval;
+	int ret;
+
+	switch (channel) {
+	case MT6360_CHAN_USBID:
+	case MT6360_CHAN_VSYS:
+	case MT6360_CHAN_VBAT:
+	case MT6360_CHAN_CHG_VDDP:
+	case MT6360_CHAN_VREF_TS:
+	case MT6360_CHAN_TS:
+		*val = 1250;
+		return IIO_VAL_INT;
+	case MT6360_CHAN_VBUSDIV5:
+		*val = 6250;
+		return IIO_VAL_INT;
+	case MT6360_CHAN_VBUSDIV2:
+	case MT6360_CHAN_IBUS:
+	case MT6360_CHAN_IBAT:
+		*val = 2500;
+
+		if (channel == MT6360_CHAN_IBUS) {
+			/* IBUS will be affected by input current limit for the different Ron */
+			/* Check whether the config is <400mA or not */
+			ret = regmap_read(mad->regmap, MT6360_REG_PMUCHGCTRL3, &regval);
+			if (ret)
+				return ret;
+
+			regval = (regval & MT6360_AICR_MASK) >> MT6360_AICR_SHFT;
+			if (regval < MT6360_AICR_400MA)
+				*val = 1900;
+		}
+
+		return IIO_VAL_INT;
+	case MT6360_CHAN_TEMP_JC:
+		*val = 105;
+		*val2 = 100;
+		return IIO_VAL_FRACTIONAL;
+	}
+
+	return -EINVAL;
+}
+
+static int mt6360_adc_read_offset(struct mt6360_adc_data *mad, int channel, int *val)
+{
+	*val = (channel == MT6360_CHAN_TEMP_JC) ? -80 : 0;
+	return IIO_VAL_INT;
+
+}
+
+static int mt6360_adc_read_raw(struct iio_dev *iio_dev, const struct iio_chan_spec *chan,
+			       int *val, int *val2, long mask)
+{
+	struct mt6360_adc_data *mad = iio_priv(iio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		return mt6360_adc_read_channel(mad, chan->channel, val);
+	case IIO_CHAN_INFO_SCALE:
+		return mt6360_adc_read_scale(mad, chan->channel, val, val2);
+	case IIO_CHAN_INFO_OFFSET:
+		return mt6360_adc_read_offset(mad, chan->channel, val);
+	}
+
+	return -EINVAL;
+}
+
+static const char *mt6360_channel_labels[MT6360_CHAN_MAX] = {
+	"usbid", "vbusdiv5", "vbusdiv2", "vsys", "vbat", "ibus", "ibat", "chg_vddp", "temp_jc",
+	"vref_ts", "ts"
+};
+
+static int mt6360_adc_read_label(struct iio_dev *iio_dev, const struct iio_chan_spec *chan,
+				 char *label)
+{
+	return snprintf(label, PAGE_SIZE, "%s\n", mt6360_channel_labels[chan->channel]);
+}
+
+static const struct iio_info mt6360_adc_iio_info = {
+	.read_raw = mt6360_adc_read_raw,
+	.read_label = mt6360_adc_read_label,
+};
+
+#define MT6360_ADC_CHAN(_idx, _type) {				\
+	.type = _type,						\
+	.channel = MT6360_CHAN_##_idx,				\
+	.scan_index = MT6360_CHAN_##_idx,			\
+	.datasheet_name = #_idx,				\
+	.scan_type =  {						\
+		.sign = 'u',					\
+		.realbits = 16,					\
+		.storagebits = 16,				\
+		.endianness = IIO_CPU,				\
+	},							\
+	.indexed = 1,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
+				BIT(IIO_CHAN_INFO_SCALE) |	\
+				BIT(IIO_CHAN_INFO_OFFSET),	\
+}
+
+static const struct iio_chan_spec mt6360_adc_channels[] = {
+	MT6360_ADC_CHAN(USBID, IIO_VOLTAGE),
+	MT6360_ADC_CHAN(VBUSDIV5, IIO_VOLTAGE),
+	MT6360_ADC_CHAN(VBUSDIV2, IIO_VOLTAGE),
+	MT6360_ADC_CHAN(VSYS, IIO_VOLTAGE),
+	MT6360_ADC_CHAN(VBAT, IIO_VOLTAGE),
+	MT6360_ADC_CHAN(IBUS, IIO_CURRENT),
+	MT6360_ADC_CHAN(IBAT, IIO_CURRENT),
+	MT6360_ADC_CHAN(CHG_VDDP, IIO_VOLTAGE),
+	MT6360_ADC_CHAN(TEMP_JC, IIO_TEMP),
+	MT6360_ADC_CHAN(VREF_TS, IIO_VOLTAGE),
+	MT6360_ADC_CHAN(TS, IIO_VOLTAGE),
+	IIO_CHAN_SOFT_TIMESTAMP(MT6360_CHAN_MAX),
+};
+
+static irqreturn_t mt6360_adc_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct mt6360_adc_data *mad = iio_priv(indio_dev);
+	struct {
+		u16 values[MT6360_CHAN_MAX];
+		int64_t timestamp;
+	} data __aligned(8);
+	int i = 0, bit, val, ret;
+
+	memset(&data, 0, sizeof(data));
+	for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) {
+		ret = mt6360_adc_read_channel(mad, bit, &val);
+		if (ret < 0) {
+			dev_warn(&indio_dev->dev, "Failed to get channel %d conversion val\n", bit);
+			goto out;
+		}
+
+		data.values[i++] = val;
+	}
+	iio_push_to_buffers_with_timestamp(indio_dev, &data, iio_get_time_ns(indio_dev));
+out:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static inline int mt6360_adc_reset(struct mt6360_adc_data *info)
+{
+	__be16 adc_enable;
+	ktime_t all_off_time;
+	int i, ret;
+
+	/* Clear ADC idle wait time to 0 */
+	ret = regmap_write(info->regmap, MT6360_REG_PMUADCIDLET, 0);
+	if (ret)
+		return ret;
+
+	/* Only keep ADC enable, but keep all channels off */
+	adc_enable = cpu_to_be16(MT6360_ADCEN_MASK);
+	ret = regmap_raw_write(info->regmap, MT6360_REG_PMUADCCFG, &adc_enable, sizeof(adc_enable));
+	if (ret)
+		return ret;
+
+	/* Reset all channel off time to the current one */
+	all_off_time = ktime_get();
+	for (i = 0; i < MT6360_CHAN_MAX; i++)
+		info->last_off_timestamps[i] = all_off_time;
+
+	return 0;
+}
+
+static int mt6360_adc_probe(struct platform_device *pdev)
+{
+	struct mt6360_adc_data *mad;
+	struct regmap *regmap;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!regmap) {
+		dev_err(&pdev->dev, "Failed to get parent regmap\n");
+		return -ENODEV;
+	}
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*mad));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	mad = iio_priv(indio_dev);
+	mad->dev = &pdev->dev;
+	mad->regmap = regmap;
+	mutex_init(&mad->adc_lock);
+
+	ret = mt6360_adc_reset(mad);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to reset adc\n");
+		return ret;
+	}
+
+	indio_dev->name = dev_name(&pdev->dev);
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->info = &mt6360_adc_iio_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = mt6360_adc_channels;
+	indio_dev->num_channels = ARRAY_SIZE(mt6360_adc_channels);
+
+	ret = devm_iio_triggered_buffer_setup(&pdev->dev, indio_dev, NULL,
+					      mt6360_adc_trigger_handler, NULL);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to allocate iio trigger buffer\n");
+		return ret;
+	}
+
+	return devm_iio_device_register(&pdev->dev, indio_dev);
+}
+
+static const struct of_device_id __maybe_unused mt6360_adc_of_id[] = {
+	{ .compatible = "mediatek,mt6360-adc", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mt6360_adc_of_id);
+
+static struct platform_driver mt6360_adc_driver = {
+	.driver = {
+		.name = "mt6360-adc",
+		.of_match_table = mt6360_adc_of_id,
+	},
+	.probe = mt6360_adc_probe,
+};
+module_platform_driver(mt6360_adc_driver);
+
+MODULE_AUTHOR("Gene Chen <gene_chen@richtek.com>");
+MODULE_DESCRIPTION("MT6360 ADC Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

Re: [PATCH v6 1/3] dt-bindings: iio: adc: add bindings doc for MT6360 ADC

[Rob Herring]

On Thu, 01 Oct 2020 16:54:06 +0800, Gene Chen wrote:
> From: Gene Chen <gene_chen@richtek.com>
> 
> This change adds the binding doc for the MT6360 ADC.
> 
> Signed-off-by: Gene Chen <gene_chen@richtek.com>
> ---
>  .../bindings/iio/adc/mediatek,mt6360-adc.yaml      | 34 ++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/mediatek,mt6360-adc.yaml
> 


Please add Acked-by/Reviewed-by tags when posting new versions. However,
there's no need to repost patches *only* to add the tags. The upstream
maintainer will do that for acks received on the version they apply.

If a tag was not added on purpose, please state why and what changed.

Re: [PATCH v6 0/3] iio: adc: mt6360: Add ADC driver for MT6360

[Jonathan Cameron]

On Thu,  1 Oct 2020 16:54:05 +0800
Gene Chen <gene.chen.richtek@gmail.com> wrote:

> This patch series add MT6360 ADC support contains driver, testing document
> and binding document
> 
> Gene Chen (2)
>   dt-bindings: iio: adc: add bindings doc for MT6360 ADC
>   Documentation: ABI: testing: mt6360: Add ADC sysfs guideline
>   iio: adc: mt6360: Add ADC driver for MT6360

Hi Gene

This looks good to me.  I'm just waiting now on some final
reviews for the patch that adds the label attribute support.
Once those are in I'll pick your driver up as well.

If I seem to have lost it, feel free to poke me!

Thanks,

Jonathan

> 
>  Documentation/ABI/testing/sysfs-bus-iio-adc-mt6360                 |   78 ++
>  Documentation/devicetree/bindings/iio/adc/mediatek,mt6360-adc.yaml |   34 
>  drivers/iio/adc/Kconfig                                            |   11 
>  drivers/iio/adc/Makefile                                           |    1 
>  drivers/iio/adc/mt6360-adc.c                                       |  362 ++++++++++
>  5 files changed, 486 insertions(+)
> 
> changelogs between v1 & v2
>  - adc: use IIO_CHAN_INFO_PROCESSED only
>  - adc: use devm_iio_triggered_buffer_setup
>  - adc: use use s64 to record timestamp
> 
> changelogs between v2 & v3
>  - Rearrange include file order by alphabet
>  - Set line length constraint below 100
>  - Add Document for testing adc sysfs node guideline
>  - Set compiler 64 bit aligned when handle iio timestamp
> 
> changelogs between v3 & v4
>  - Fix sysfs guideline description
>  - Replace iio channel processed by raw/scale/offset
>  - Add comment of read adc flow for special HW design
> 
> changelogs between v4 & v5
>  - Rename dt-bindings aligned to file name
>  - Aligned sysfs node name with driver and add VBUSDIVX description
>  - Add ADC channel sysfs node "*_labels"
> 
> changelogs between v5 & v6
>  - Memset aligned adc data
>  - Remove strong casting void pointer
> 

Re: [PATCH v6 3/3] iio: adc: mt6360: Add ADC driver for MT6360

[Andy Shevchenko]

On Wed, Sep 30, 2020 at 11:55 AM Gene Chen <gene.chen.richtek@gmail.com> wrote:
>
> From: Gene Chen <gene_chen@richtek.com>
>
> Add MT6360 ADC driver include Charger Current, Voltage, and

including

> Temperature.

...

> +#define MT6360_AICR_MASK       GENMASK(7, 2)

bits.h is missed.

...

> +#define MT6360_ADCEN_MASK      0x8000

BIT() ?

...

> +static int mt6360_adc_read_channel(struct mt6360_adc_data *mad, int channel, int *val)
> +{

> +       start_t = ktime_get();
> +       predict_end_t = ktime_add_ms(mad->last_off_timestamps[channel], 2 * ADC_WAIT_TIME_MS);
> +
> +       if (ktime_after(start_t, predict_end_t))
> +               pre_wait_time = ADC_WAIT_TIME_MS;
> +       else
> +               pre_wait_time = 3 * ADC_WAIT_TIME_MS;
> +
> +       msleep(pre_wait_time);

This looks like NIH of wait_interruptible() or so.

...

> +       while (true) {

Oh, please avoid infinite loops.

> +               ret = regmap_raw_read(mad->regmap, MT6360_REG_PMUADCRPT1, rpt, sizeof(rpt));
> +               if (ret)
> +                       goto out_adc_conv;
> +
> +               /*
> +                * There are two functions, ZCV and TypeC OTP, running ADC VBAT and TS in
> +                * background, and ADC samples are taken on a fixed frequency no matter read the
> +                * previous one or not.
> +                * To avoid conflict, We set minimum time threshold after enable ADC and
> +                * check report channel is the same.
> +                * The worst case is run the same ADC twice and background function is also running,
> +                * ADC conversion sequence is desire channel before start ADC, background ADC,
> +                * desire channel after start ADC.
> +                * So the minimum correct data is three times of typical conversion time.
> +                */
> +               if ((rpt[0] & MT6360_RPTCH_MASK) == channel)
> +                       break;
> +
> +               msleep(ADC_WAIT_TIME_MS);
> +       }

So, a new NIH of regmap_read_poll_timeout() ?

...

> +       /* rpt[1]: ADC_HI_BYTE, rpt[2]: ADC_LOW_BYTE */
> +       *val = rpt[1] << 8 | rpt[2];

get_unalined_be16() and hence redundant comment.

...

> +static int mt6360_adc_read_offset(struct mt6360_adc_data *mad, int channel, int *val)
> +{
> +       *val = (channel == MT6360_CHAN_TEMP_JC) ? -80 : 0;
> +       return IIO_VAL_INT;

> +

Misplaced blank line.

> +}

> +static const char *mt6360_channel_labels[MT6360_CHAN_MAX] = {
> +       "usbid", "vbusdiv5", "vbusdiv2", "vsys", "vbat", "ibus", "ibat", "chg_vddp", "temp_jc",
> +       "vref_ts", "ts"

Leave comma.
And split  either by power of two or equally between the lines (seems
like 8 + 3 here).

> +};

...

> +       /* Reset all channel off time to the current one */
> +       all_off_time = ktime_get();
> +       for (i = 0; i < MT6360_CHAN_MAX; i++)
> +               info->last_off_timestamps[i] = all_off_time;

memset32() / memset64() / memset_l()
(Not applicable, but JFYI: memset_p() also present)

-- 
With Best Regards,
Andy Shevchenko