linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 1/2] staging: iio: ad7606: Move out of staging
@ 2018-12-10 11:03 Stefan Popa
  2018-12-10 21:34 ` Jonathan Cameron
  2018-12-11 17:57 ` Jonathan Cameron
  0 siblings, 2 replies; 3+ messages in thread
From: Stefan Popa @ 2018-12-10 11:03 UTC (permalink / raw)
  To: jic23
  Cc: Michael.Hennerich, knaack.h, lars, pmeerw, gregkh, linux-kernel,
	linux-iio, devel, stefan.popa

Move ad7606 ADC driver out of staging and into the mainline.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
---
Changes in v2:
	- Simplified the Kconfig menu.
	- Added SPDX-License-Identifier.
	- Ordered the includes alphabetically.
	- Used a threaded interrupt.
	- Replaced ad7606_poll_bh_to_ring() with ad7606_trigger_handler().
	- Used a trigger. 
	- Replaced wait_event_interruptible() with wait_for_completion_timeout().
	- Replaced wake_up_interruptible() with complete().
	- Used devm_iio_triggered_buffer_setup().
	- Added buffer_ops.
	- Used single line comments where needed.
	- Removed the gap between docs and struct.
	- Added ad7606_of_match[].
Changes in v3:
	- Added a comment which offers more information of the way the interrupt
	  is triggered.
	- Fixed the way a new conversion is triggered.
	- endianness = IIO_CPU
	- Removed unnecessary mutex locks.
	- Removed the buffer_postdisable ops and replaced it with buffer_predisable.
	- Added a devm_add_action_or_reset() which deals with regulator_disable().
	- Misc style fixes.
Changes in v4:
	- Removed unused fields from the ad7606_state struct.
	- Used the find_closest() macro when searching for the available scale
	and the oversampling ratios.

 MAINTAINERS                          |   7 +
 drivers/iio/adc/Kconfig              |  28 ++
 drivers/iio/adc/Makefile             |   3 +
 drivers/iio/adc/ad7606.c             | 588 +++++++++++++++++++++++++++++++++++
 drivers/iio/adc/ad7606.h             |  99 ++++++
 drivers/iio/adc/ad7606_par.c         | 105 +++++++
 drivers/iio/adc/ad7606_spi.c         |  82 +++++
 drivers/staging/iio/adc/Kconfig      |  34 --
 drivers/staging/iio/adc/Makefile     |   3 -
 drivers/staging/iio/adc/ad7606.c     | 565 ---------------------------------
 drivers/staging/iio/adc/ad7606.h     | 106 -------
 drivers/staging/iio/adc/ad7606_par.c | 113 -------
 drivers/staging/iio/adc/ad7606_spi.c |  79 -----
 13 files changed, 912 insertions(+), 900 deletions(-)
 create mode 100644 drivers/iio/adc/ad7606.c
 create mode 100644 drivers/iio/adc/ad7606.h
 create mode 100644 drivers/iio/adc/ad7606_par.c
 create mode 100644 drivers/iio/adc/ad7606_spi.c
 delete mode 100644 drivers/staging/iio/adc/ad7606.c
 delete mode 100644 drivers/staging/iio/adc/ad7606.h
 delete mode 100644 drivers/staging/iio/adc/ad7606_par.c
 delete mode 100644 drivers/staging/iio/adc/ad7606_spi.c

diff --git a/MAINTAINERS b/MAINTAINERS
index f642044..843545d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -839,6 +839,13 @@ S:	Supported
 F:	drivers/iio/dac/ad5758.c
 F:	Documentation/devicetree/bindings/iio/dac/ad5758.txt
 
+ANALOG DEVICES INC AD7606 DRIVER
+M:	Stefan Popa <stefan.popa@analog.com>
+L:	linux-iio@vger.kernel.org
+W:	http://ez.analog.com/community/linux-device-drivers
+S:	Supported
+F:	drivers/iio/adc/ad7606.c
+
 ANALOG DEVICES INC AD9389B DRIVER
 M:	Hans Verkuil <hans.verkuil@cisco.com>
 L:	linux-media@vger.kernel.org
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index a52fea8..c3f61c9 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -58,6 +58,34 @@ config AD7476
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7476.
 
+config AD7606
+	tristate
+	depends on GPIOLIB || COMPILE_TEST
+	depends on HAS_IOMEM
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+
+config AD7606_IFACE_PARALLEL
+	tristate "Analog Devices AD7606 ADC driver with parallel interface support"
+	select AD7606
+	help
+	  Say yes here to build parallel interface support for Analog Devices:
+	  ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad7606_parallel.
+
+config AD7606_IFACE_SPI
+	tristate "Analog Devices AD7606 ADC driver with spi interface support"
+	depends on SPI
+	select AD7606
+	help
+	  Say yes here to build spi interface support for Analog Devices:
+	  ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad7606_spi.
+
 config AD7766
 	tristate "Analog Devices AD7766/AD7767 ADC driver"
 	depends on SPI_MASTER
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index a6e6a0b..b734f4f 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -8,6 +8,9 @@ obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
 obj-$(CONFIG_AD7266) += ad7266.o
 obj-$(CONFIG_AD7291) += ad7291.o
 obj-$(CONFIG_AD7298) += ad7298.o
+obj-$(CONFIG_AD7606_IFACE_PARALLEL) += ad7606_par.o
+obj-$(CONFIG_AD7606_IFACE_SPI) += ad7606_spi.o
+obj-$(CONFIG_AD7606) += ad7606.o
 obj-$(CONFIG_AD7923) += ad7923.o
 obj-$(CONFIG_AD7476) += ad7476.o
 obj-$(CONFIG_AD7766) += ad7766.o
diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
new file mode 100644
index 0000000..fa3c8e0
--- /dev/null
+++ b/drivers/iio/adc/ad7606.c
@@ -0,0 +1,588 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * AD7606 SPI ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/util_macros.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#include "ad7606.h"
+
+/*
+ * Scales are computed as 5000/32768 and 10000/32768 respectively,
+ * so that when applied to the raw values they provide mV values
+ */
+static const unsigned int scale_avail[2] = {
+	152588, 305176
+};
+
+static const unsigned int ad7606_oversampling_avail[7] = {
+	1, 2, 4, 8, 16, 32, 64,
+};
+
+static int ad7606_reset(struct ad7606_state *st)
+{
+	if (st->gpio_reset) {
+		gpiod_set_value(st->gpio_reset, 1);
+		ndelay(100); /* t_reset >= 100ns */
+		gpiod_set_value(st->gpio_reset, 0);
+		return 0;
+	}
+
+	return -ENODEV;
+}
+
+static int ad7606_read_samples(struct ad7606_state *st)
+{
+	unsigned int num = st->chip_info->num_channels;
+	u16 *data = st->data;
+	int ret;
+
+	/*
+	 * The frstdata signal is set to high while and after reading the sample
+	 * of the first channel and low for all other channels. This can be used
+	 * to check that the incoming data is correctly aligned. During normal
+	 * operation the data should never become unaligned, but some glitch or
+	 * electrostatic discharge might cause an extra read or clock cycle.
+	 * Monitoring the frstdata signal allows to recover from such failure
+	 * situations.
+	 */
+
+	if (st->gpio_frstdata) {
+		ret = st->bops->read_block(st->dev, 1, data);
+		if (ret)
+			return ret;
+
+		if (!gpiod_get_value(st->gpio_frstdata)) {
+			ad7606_reset(st);
+			return -EIO;
+		}
+
+		data++;
+		num--;
+	}
+
+	return st->bops->read_block(st->dev, num, data);
+}
+
+static irqreturn_t ad7606_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct ad7606_state *st = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	ret = ad7606_read_samples(st);
+	if (ret == 0)
+		iio_push_to_buffers_with_timestamp(indio_dev, st->data,
+						   iio_get_time_ns(indio_dev));
+
+	iio_trigger_notify_done(indio_dev->trig);
+	/* The rising edge of the CONVST signal starts a new conversion. */
+	gpiod_set_value(st->gpio_convst, 1);
+
+	mutex_unlock(&st->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int ad7606_scan_direct(struct iio_dev *indio_dev, unsigned int ch)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+	int ret;
+
+	gpiod_set_value(st->gpio_convst, 1);
+	ret = wait_for_completion_timeout(&st->completion,
+					  msecs_to_jiffies(1000));
+	if (!ret) {
+		ret = -ETIMEDOUT;
+		goto error_ret;
+	}
+
+	ret = ad7606_read_samples(st);
+	if (ret == 0)
+		ret = st->data[ch];
+
+error_ret:
+	gpiod_set_value(st->gpio_convst, 0);
+
+	return ret;
+}
+
+static int ad7606_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val,
+			   int *val2,
+			   long m)
+{
+	int ret;
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	switch (m) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = ad7606_scan_direct(indio_dev, chan->address);
+		iio_device_release_direct_mode(indio_dev);
+
+		if (ret < 0)
+			return ret;
+		*val = (short)ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = scale_avail[st->range];
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		*val = st->oversampling;
+		return IIO_VAL_INT;
+	}
+	return -EINVAL;
+}
+
+static ssize_t in_voltage_scale_available_show(struct device *dev,
+					       struct device_attribute *attr,
+					       char *buf)
+{
+	int i, len = 0;
+
+	for (i = 0; i < ARRAY_SIZE(scale_avail); i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
+				 scale_avail[i]);
+
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0);
+
+static int ad7606_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val,
+			    int val2,
+			    long mask)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+	int values[3], i;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		mutex_lock(&st->lock);
+		i = find_closest(val2, scale_avail, ARRAY_SIZE(scale_avail));
+		gpiod_set_value(st->gpio_range, i);
+		st->range = i;
+		mutex_unlock(&st->lock);
+
+		return 0;
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		if (val2)
+			return -EINVAL;
+		i = find_closest(val, ad7606_oversampling_avail,
+				 ARRAY_SIZE(ad7606_oversampling_avail));
+
+		values[0] = (i >> 0) & 1;
+		values[1] = (i >> 1) & 1;
+		values[2] = (i >> 2) & 1;
+
+		mutex_lock(&st->lock);
+		gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc,
+				      values);
+		st->oversampling = ad7606_oversampling_avail[i];
+		mutex_unlock(&st->lock);
+
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static IIO_CONST_ATTR(oversampling_ratio_available, "1 2 4 8 16 32 64");
+
+static struct attribute *ad7606_attributes_os_and_range[] = {
+	&iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
+	&iio_const_attr_oversampling_ratio_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ad7606_attribute_group_os_and_range = {
+	.attrs = ad7606_attributes_os_and_range,
+};
+
+static struct attribute *ad7606_attributes_os[] = {
+	&iio_const_attr_oversampling_ratio_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ad7606_attribute_group_os = {
+	.attrs = ad7606_attributes_os,
+};
+
+static struct attribute *ad7606_attributes_range[] = {
+	&iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ad7606_attribute_group_range = {
+	.attrs = ad7606_attributes_range,
+};
+
+#define AD760X_CHANNEL(num, mask) {				\
+		.type = IIO_VOLTAGE,				\
+		.indexed = 1,					\
+		.channel = num,					\
+		.address = num,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\
+		.info_mask_shared_by_all = mask,		\
+		.scan_index = num,				\
+		.scan_type = {					\
+			.sign = 's',				\
+			.realbits = 16,				\
+			.storagebits = 16,			\
+			.endianness = IIO_CPU,			\
+		},						\
+}
+
+#define AD7605_CHANNEL(num)	\
+	AD760X_CHANNEL(num, 0)
+
+#define AD7606_CHANNEL(num)	\
+	AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
+
+static const struct iio_chan_spec ad7605_channels[] = {
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+	AD7605_CHANNEL(0),
+	AD7605_CHANNEL(1),
+	AD7605_CHANNEL(2),
+	AD7605_CHANNEL(3),
+};
+
+static const struct iio_chan_spec ad7606_channels[] = {
+	IIO_CHAN_SOFT_TIMESTAMP(8),
+	AD7606_CHANNEL(0),
+	AD7606_CHANNEL(1),
+	AD7606_CHANNEL(2),
+	AD7606_CHANNEL(3),
+	AD7606_CHANNEL(4),
+	AD7606_CHANNEL(5),
+	AD7606_CHANNEL(6),
+	AD7606_CHANNEL(7),
+};
+
+static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
+	/* More devices added in future */
+	[ID_AD7605_4] = {
+		.channels = ad7605_channels,
+		.num_channels = 5,
+	},
+	[ID_AD7606_8] = {
+		.channels = ad7606_channels,
+		.num_channels = 9,
+		.has_oversampling = true,
+	},
+	[ID_AD7606_6] = {
+		.channels = ad7606_channels,
+		.num_channels = 7,
+		.has_oversampling = true,
+	},
+	[ID_AD7606_4] = {
+		.channels = ad7606_channels,
+		.num_channels = 5,
+		.has_oversampling = true,
+	},
+};
+
+static int ad7606_request_gpios(struct ad7606_state *st)
+{
+	struct device *dev = st->dev;
+
+	st->gpio_convst = devm_gpiod_get(dev, "adi,conversion-start",
+					 GPIOD_OUT_LOW);
+	if (IS_ERR(st->gpio_convst))
+		return PTR_ERR(st->gpio_convst);
+
+	st->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(st->gpio_reset))
+		return PTR_ERR(st->gpio_reset);
+
+	st->gpio_range = devm_gpiod_get_optional(dev, "adi,range",
+						 GPIOD_OUT_LOW);
+	if (IS_ERR(st->gpio_range))
+		return PTR_ERR(st->gpio_range);
+
+	st->gpio_standby = devm_gpiod_get_optional(dev, "standby",
+						   GPIOD_OUT_HIGH);
+	if (IS_ERR(st->gpio_standby))
+		return PTR_ERR(st->gpio_standby);
+
+	st->gpio_frstdata = devm_gpiod_get_optional(dev, "adi,first-data",
+						    GPIOD_IN);
+	if (IS_ERR(st->gpio_frstdata))
+		return PTR_ERR(st->gpio_frstdata);
+
+	if (!st->chip_info->has_oversampling)
+		return 0;
+
+	st->gpio_os = devm_gpiod_get_array_optional(dev,
+						    "adi,oversampling-ratio",
+						    GPIOD_OUT_LOW);
+	return PTR_ERR_OR_ZERO(st->gpio_os);
+}
+
+/*
+ * The BUSY signal indicates when conversions are in progress, so when a rising
+ * edge of CONVST is applied, BUSY goes logic high and transitions low at the
+ * end of the entire conversion process. The falling edge of the BUSY signal
+ * triggers this interrupt.
+ */
+static irqreturn_t ad7606_interrupt(int irq, void *dev_id)
+{
+	struct iio_dev *indio_dev = dev_id;
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	if (iio_buffer_enabled(indio_dev)) {
+		gpiod_set_value(st->gpio_convst, 0);
+		iio_trigger_poll_chained(st->trig);
+	} else {
+		complete(&st->completion);
+	}
+
+	return IRQ_HANDLED;
+};
+
+static int ad7606_validate_trigger(struct iio_dev *indio_dev,
+				   struct iio_trigger *trig)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	if (st->trig != trig)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int ad7606_buffer_postenable(struct iio_dev *indio_dev)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	iio_triggered_buffer_postenable(indio_dev);
+	gpiod_set_value(st->gpio_convst, 1);
+
+	return 0;
+}
+
+static int ad7606_buffer_predisable(struct iio_dev *indio_dev)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+	int ret;
+
+	reinit_completion(&st->completion);
+	gpiod_set_value(st->gpio_convst, 1);
+	ret = wait_for_completion_timeout(&st->completion,
+					  msecs_to_jiffies(1000));
+	gpiod_set_value(st->gpio_convst, 0);
+
+	return iio_triggered_buffer_predisable(indio_dev);
+}
+
+static const struct iio_buffer_setup_ops ad7606_buffer_ops = {
+	.postenable = &ad7606_buffer_postenable,
+	.predisable = &ad7606_buffer_predisable,
+};
+
+static const struct iio_info ad7606_info_no_os_or_range = {
+	.read_raw = &ad7606_read_raw,
+	.validate_trigger = &ad7606_validate_trigger,
+};
+
+static const struct iio_info ad7606_info_os_and_range = {
+	.read_raw = &ad7606_read_raw,
+	.write_raw = &ad7606_write_raw,
+	.attrs = &ad7606_attribute_group_os_and_range,
+	.validate_trigger = &ad7606_validate_trigger,
+};
+
+static const struct iio_info ad7606_info_os = {
+	.read_raw = &ad7606_read_raw,
+	.write_raw = &ad7606_write_raw,
+	.attrs = &ad7606_attribute_group_os,
+	.validate_trigger = &ad7606_validate_trigger,
+};
+
+static const struct iio_info ad7606_info_range = {
+	.read_raw = &ad7606_read_raw,
+	.write_raw = &ad7606_write_raw,
+	.attrs = &ad7606_attribute_group_range,
+	.validate_trigger = &ad7606_validate_trigger,
+};
+
+static const struct iio_trigger_ops ad7606_trigger_ops = {
+	.validate_device = iio_trigger_validate_own_device,
+};
+
+static void ad7606_regulator_disable(void *data)
+{
+	struct ad7606_state *st = data;
+
+	regulator_disable(st->reg);
+}
+
+int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
+		 const char *name, unsigned int id,
+		 const struct ad7606_bus_ops *bops)
+{
+	struct ad7606_state *st;
+	int ret;
+	struct iio_dev *indio_dev;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+	dev_set_drvdata(dev, indio_dev);
+
+	st->dev = dev;
+	mutex_init(&st->lock);
+	st->bops = bops;
+	st->base_address = base_address;
+	st->oversampling = 1;
+
+	st->reg = devm_regulator_get(dev, "avcc");
+	if (IS_ERR(st->reg))
+		return PTR_ERR(st->reg);
+
+	ret = regulator_enable(st->reg);
+	if (ret) {
+		dev_err(dev, "Failed to enable specified AVcc supply\n");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(dev, ad7606_regulator_disable, st);
+	if (ret)
+		return ret;
+
+	st->chip_info = &ad7606_chip_info_tbl[id];
+
+	ret = ad7606_request_gpios(st);
+	if (ret)
+		return ret;
+
+	indio_dev->dev.parent = dev;
+	if (st->gpio_os) {
+		if (st->gpio_range)
+			indio_dev->info = &ad7606_info_os_and_range;
+		else
+			indio_dev->info = &ad7606_info_os;
+	} else {
+		if (st->gpio_range)
+			indio_dev->info = &ad7606_info_range;
+		else
+			indio_dev->info = &ad7606_info_no_os_or_range;
+	}
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->name = name;
+	indio_dev->channels = st->chip_info->channels;
+	indio_dev->num_channels = st->chip_info->num_channels;
+
+	ret = ad7606_reset(st);
+	if (ret)
+		dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n");
+
+	st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
+					  indio_dev->name, indio_dev->id);
+	if (st->trig == NULL)
+		return -ENOMEM;
+
+	st->trig->ops = &ad7606_trigger_ops;
+	st->trig->dev.parent = dev;
+	iio_trigger_set_drvdata(st->trig, indio_dev);
+	ret = devm_iio_trigger_register(dev, st->trig);
+	if (ret)
+		return ret;
+
+	indio_dev->trig = iio_trigger_get(st->trig);
+
+	init_completion(&st->completion);
+
+	ret = devm_request_threaded_irq(dev, irq,
+					NULL,
+					&ad7606_interrupt,
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					name, indio_dev);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
+					      &iio_pollfunc_store_time,
+					      &ad7606_trigger_handler,
+					      &ad7606_buffer_ops);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(dev, indio_dev);
+
+}
+EXPORT_SYMBOL_GPL(ad7606_probe);
+
+#ifdef CONFIG_PM_SLEEP
+
+static int ad7606_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	if (st->gpio_standby) {
+		gpiod_set_value(st->gpio_range, 1);
+		gpiod_set_value(st->gpio_standby, 0);
+	}
+
+	return 0;
+}
+
+static int ad7606_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	if (st->gpio_standby) {
+		gpiod_set_value(st->gpio_range, st->range);
+		gpiod_set_value(st->gpio_standby, 1);
+		ad7606_reset(st);
+	}
+
+	return 0;
+}
+
+SIMPLE_DEV_PM_OPS(ad7606_pm_ops, ad7606_suspend, ad7606_resume);
+EXPORT_SYMBOL_GPL(ad7606_pm_ops);
+
+#endif
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h
new file mode 100644
index 0000000..40433af
--- /dev/null
+++ b/drivers/iio/adc/ad7606.h
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * AD7606 ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ */
+
+#ifndef IIO_ADC_AD7606_H_
+#define IIO_ADC_AD7606_H_
+
+/**
+ * struct ad7606_chip_info - chip specific information
+ * @channels:		channel specification
+ * @num_channels:	number of channels
+ * @has_oversampling:   whether the device has oversampling support
+ */
+struct ad7606_chip_info {
+	const struct iio_chan_spec	*channels;
+	unsigned int			num_channels;
+	bool				has_oversampling;
+};
+
+/**
+ * struct ad7606_state - driver instance specific data
+ * @dev		pointer to kernel device
+ * @chip_info		entry in the table of chips that describes this device
+ * @reg		regulator info for the the power supply of the device
+ * @bops		bus operations (SPI or parallel)
+ * @range		voltage range selection, selects which scale to apply
+ * @oversampling	oversampling selection
+ * @base_address	address from where to read data in parallel operation
+ * @lock		protect sensor state from concurrent accesses to GPIOs
+ * @gpio_convst	GPIO descriptor for conversion start signal (CONVST)
+ * @gpio_reset		GPIO descriptor for device hard-reset
+ * @gpio_range		GPIO descriptor for range selection
+ * @gpio_standby	GPIO descriptor for stand-by signal (STBY),
+ *			controls power-down mode of device
+ * @gpio_frstdata	GPIO descriptor for reading from device when data
+ *			is being read on the first channel
+ * @gpio_os		GPIO descriptors to control oversampling on the device
+ * @complete		completion to indicate end of conversion
+ * @trig		The IIO trigger associated with the device.
+ * @data		buffer for reading data from the device
+ */
+struct ad7606_state {
+	struct device			*dev;
+	const struct ad7606_chip_info	*chip_info;
+	struct regulator		*reg;
+	const struct ad7606_bus_ops	*bops;
+	unsigned int			range;
+	unsigned int			oversampling;
+	void __iomem			*base_address;
+
+	struct mutex			lock; /* protect sensor state */
+	struct gpio_desc		*gpio_convst;
+	struct gpio_desc		*gpio_reset;
+	struct gpio_desc		*gpio_range;
+	struct gpio_desc		*gpio_standby;
+	struct gpio_desc		*gpio_frstdata;
+	struct gpio_descs		*gpio_os;
+	struct iio_trigger		*trig;
+	struct completion		completion;
+
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 * 8 * 16-bit samples + 64-bit timestamp
+	 */
+	unsigned short			data[12] ____cacheline_aligned;
+};
+
+/**
+ * struct ad7606_bus_ops - driver bus operations
+ * @read_block		function pointer for reading blocks of data
+ */
+struct ad7606_bus_ops {
+	/* more methods added in future? */
+	int (*read_block)(struct device *dev, int num, void *data);
+};
+
+int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
+		 const char *name, unsigned int id,
+		 const struct ad7606_bus_ops *bops);
+
+enum ad7606_supported_device_ids {
+	ID_AD7605_4,
+	ID_AD7606_8,
+	ID_AD7606_6,
+	ID_AD7606_4
+};
+
+#ifdef CONFIG_PM_SLEEP
+extern const struct dev_pm_ops ad7606_pm_ops;
+#define AD7606_PM_OPS (&ad7606_pm_ops)
+#else
+#define AD7606_PM_OPS NULL
+#endif
+
+#endif /* IIO_ADC_AD7606_H_ */
diff --git a/drivers/iio/adc/ad7606_par.c b/drivers/iio/adc/ad7606_par.c
new file mode 100644
index 0000000..32c7069
--- /dev/null
+++ b/drivers/iio/adc/ad7606_par.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * AD7606 Parallel Interface ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <linux/iio/iio.h>
+#include "ad7606.h"
+
+static int ad7606_par16_read_block(struct device *dev,
+				   int count, void *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	insw((unsigned long)st->base_address, buf, count);
+
+	return 0;
+}
+
+static const struct ad7606_bus_ops ad7606_par16_bops = {
+	.read_block = ad7606_par16_read_block,
+};
+
+static int ad7606_par8_read_block(struct device *dev,
+				  int count, void *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	insb((unsigned long)st->base_address, buf, count * 2);
+
+	return 0;
+}
+
+static const struct ad7606_bus_ops ad7606_par8_bops = {
+	.read_block = ad7606_par8_read_block,
+};
+
+static int ad7606_par_probe(struct platform_device *pdev)
+{
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	struct resource *res;
+	void __iomem *addr;
+	resource_size_t remap_size;
+	int irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no irq: %d\n", irq);
+		return irq;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	addr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(addr))
+		return PTR_ERR(addr);
+
+	remap_size = resource_size(res);
+
+	return ad7606_probe(&pdev->dev, irq, addr,
+			    id->name, id->driver_data,
+			    remap_size > 1 ? &ad7606_par16_bops :
+			    &ad7606_par8_bops);
+}
+
+static const struct platform_device_id ad7606_driver_ids[] = {
+	{ .name	= "ad7605-4", .driver_data = ID_AD7605_4, },
+	{ .name	= "ad7606-4", .driver_data = ID_AD7606_4, },
+	{ .name	= "ad7606-6", .driver_data = ID_AD7606_6, },
+	{ .name	= "ad7606-8", .driver_data = ID_AD7606_8, },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, ad7606_driver_ids);
+
+static const struct of_device_id ad7606_of_match[] = {
+	{ .compatible = "adi,ad7605-4" },
+	{ .compatible = "adi,ad7606-4" },
+	{ .compatible = "adi,ad7606-6" },
+	{ .compatible = "adi,ad7606-8" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ad7606_of_match);
+
+static struct platform_driver ad7606_driver = {
+	.probe = ad7606_par_probe,
+	.id_table = ad7606_driver_ids,
+	.driver = {
+		.name = "ad7606",
+		.pm = AD7606_PM_OPS,
+		.of_match_table = ad7606_of_match,
+	},
+};
+module_platform_driver(ad7606_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/adc/ad7606_spi.c b/drivers/iio/adc/ad7606_spi.c
new file mode 100644
index 0000000..6bb1867
--- /dev/null
+++ b/drivers/iio/adc/ad7606_spi.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * AD7606 SPI ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+#include <linux/err.h>
+
+#include <linux/iio/iio.h>
+#include "ad7606.h"
+
+#define MAX_SPI_FREQ_HZ		23500000	/* VDRIVE above 4.75 V */
+
+static int ad7606_spi_read_block(struct device *dev,
+				 int count, void *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	int i, ret;
+	unsigned short *data = buf;
+	__be16 *bdata = buf;
+
+	ret = spi_read(spi, buf, count * 2);
+	if (ret < 0) {
+		dev_err(&spi->dev, "SPI read error\n");
+		return ret;
+	}
+
+	for (i = 0; i < count; i++)
+		data[i] = be16_to_cpu(bdata[i]);
+
+	return 0;
+}
+
+static const struct ad7606_bus_ops ad7606_spi_bops = {
+	.read_block = ad7606_spi_read_block,
+};
+
+static int ad7606_spi_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+
+	return ad7606_probe(&spi->dev, spi->irq, NULL,
+			    id->name, id->driver_data,
+			    &ad7606_spi_bops);
+}
+
+static const struct spi_device_id ad7606_id_table[] = {
+	{ "ad7605-4", ID_AD7605_4 },
+	{ "ad7606-4", ID_AD7606_4 },
+	{ "ad7606-6", ID_AD7606_6 },
+	{ "ad7606-8", ID_AD7606_8 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, ad7606_id_table);
+
+static const struct of_device_id ad7606_of_match[] = {
+	{ .compatible = "adi,ad7605-4" },
+	{ .compatible = "adi,ad7606-4" },
+	{ .compatible = "adi,ad7606-6" },
+	{ .compatible = "adi,ad7606-8" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ad7606_of_match);
+
+static struct spi_driver ad7606_driver = {
+	.driver = {
+		.name = "ad7606",
+		.of_match_table = ad7606_of_match,
+		.pm = AD7606_PM_OPS,
+	},
+	.probe = ad7606_spi_probe,
+	.id_table = ad7606_id_table,
+};
+module_spi_driver(ad7606_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
index 9d3062a..2c05adb 100644
--- a/drivers/staging/iio/adc/Kconfig
+++ b/drivers/staging/iio/adc/Kconfig
@@ -3,40 +3,6 @@
 #
 menu "Analog to digital converters"
 
-config AD7606
-	tristate "Analog Devices AD7606 ADC driver"
-	depends on GPIOLIB || COMPILE_TEST
-	depends on HAS_IOMEM
-	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
-	help
-	  Say yes here to build support for Analog Devices:
-	  ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ad7606.
-
-config AD7606_IFACE_PARALLEL
-	tristate "parallel interface support"
-	depends on AD7606
-	help
-	  Say yes here to include parallel interface support on the AD7606
-	  ADC driver.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ad7606_parallel.
-
-config AD7606_IFACE_SPI
-	tristate "spi interface support"
-	depends on AD7606
-	depends on SPI
-	help
-	  Say yes here to include parallel interface support on the AD7606
-	  ADC driver.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ad7606_spi.
-
 config AD7780
 	tristate "Analog Devices AD7780 and similar ADCs driver"
 	depends on SPI
diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile
index ebe83c1..57a18e7 100644
--- a/drivers/staging/iio/adc/Makefile
+++ b/drivers/staging/iio/adc/Makefile
@@ -3,9 +3,6 @@
 # Makefile for industrial I/O ADC drivers
 #
 
-obj-$(CONFIG_AD7606_IFACE_PARALLEL) += ad7606_par.o
-obj-$(CONFIG_AD7606_IFACE_SPI) += ad7606_spi.o
-obj-$(CONFIG_AD7606) += ad7606.o
 
 obj-$(CONFIG_AD7780) += ad7780.o
 obj-$(CONFIG_AD7816) += ad7816.o
diff --git a/drivers/staging/iio/adc/ad7606.c b/drivers/staging/iio/adc/ad7606.c
deleted file mode 100644
index 0b728b6..0000000
--- a/drivers/staging/iio/adc/ad7606.c
+++ /dev/null
@@ -1,565 +0,0 @@
-/*
- * AD7606 SPI ADC driver
- *
- * Copyright 2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2.
- */
-
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/sysfs.h>
-#include <linux/regulator/consumer.h>
-#include <linux/err.h>
-#include <linux/gpio/consumer.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/module.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-#include <linux/iio/buffer.h>
-#include <linux/iio/trigger_consumer.h>
-#include <linux/iio/triggered_buffer.h>
-
-#include "ad7606.h"
-
-/*
- * Scales are computed as 5000/32768 and 10000/32768 respectively,
- * so that when applied to the raw values they provide mV values
- */
-static const unsigned int scale_avail[2][2] = {
-	{0, 152588}, {0, 305176}
-};
-
-static int ad7606_reset(struct ad7606_state *st)
-{
-	if (st->gpio_reset) {
-		gpiod_set_value(st->gpio_reset, 1);
-		ndelay(100); /* t_reset >= 100ns */
-		gpiod_set_value(st->gpio_reset, 0);
-		return 0;
-	}
-
-	return -ENODEV;
-}
-
-static int ad7606_read_samples(struct ad7606_state *st)
-{
-	unsigned int num = st->chip_info->num_channels;
-	u16 *data = st->data;
-	int ret;
-
-	/*
-	 * The frstdata signal is set to high while and after reading the sample
-	 * of the first channel and low for all other channels. This can be used
-	 * to check that the incoming data is correctly aligned. During normal
-	 * operation the data should never become unaligned, but some glitch or
-	 * electrostatic discharge might cause an extra read or clock cycle.
-	 * Monitoring the frstdata signal allows to recover from such failure
-	 * situations.
-	 */
-
-	if (st->gpio_frstdata) {
-		ret = st->bops->read_block(st->dev, 1, data);
-		if (ret)
-			return ret;
-
-		if (!gpiod_get_value(st->gpio_frstdata)) {
-			ad7606_reset(st);
-			return -EIO;
-		}
-
-		data++;
-		num--;
-	}
-
-	return st->bops->read_block(st->dev, num, data);
-}
-
-static irqreturn_t ad7606_trigger_handler(int irq, void *p)
-{
-	struct iio_poll_func *pf = p;
-	struct ad7606_state *st = iio_priv(pf->indio_dev);
-
-	gpiod_set_value(st->gpio_convst, 1);
-
-	return IRQ_HANDLED;
-}
-
-/**
- * ad7606_poll_bh_to_ring() bh of trigger launched polling to ring buffer
- * @work_s:	the work struct through which this was scheduled
- *
- * Currently there is no option in this driver to disable the saving of
- * timestamps within the ring.
- * I think the one copy of this at a time was to avoid problems if the
- * trigger was set far too high and the reads then locked up the computer.
- **/
-static void ad7606_poll_bh_to_ring(struct work_struct *work_s)
-{
-	struct ad7606_state *st = container_of(work_s, struct ad7606_state,
-						poll_work);
-	struct iio_dev *indio_dev = iio_priv_to_dev(st);
-	int ret;
-
-	ret = ad7606_read_samples(st);
-	if (ret == 0)
-		iio_push_to_buffers_with_timestamp(indio_dev, st->data,
-						   iio_get_time_ns(indio_dev));
-
-	gpiod_set_value(st->gpio_convst, 0);
-	iio_trigger_notify_done(indio_dev->trig);
-}
-
-static int ad7606_scan_direct(struct iio_dev *indio_dev, unsigned int ch)
-{
-	struct ad7606_state *st = iio_priv(indio_dev);
-	int ret;
-
-	st->done = false;
-	gpiod_set_value(st->gpio_convst, 1);
-
-	ret = wait_event_interruptible(st->wq_data_avail, st->done);
-	if (ret)
-		goto error_ret;
-
-	ret = ad7606_read_samples(st);
-	if (ret == 0)
-		ret = st->data[ch];
-
-error_ret:
-	gpiod_set_value(st->gpio_convst, 0);
-
-	return ret;
-}
-
-static int ad7606_read_raw(struct iio_dev *indio_dev,
-			   struct iio_chan_spec const *chan,
-			   int *val,
-			   int *val2,
-			   long m)
-{
-	int ret;
-	struct ad7606_state *st = iio_priv(indio_dev);
-
-	switch (m) {
-	case IIO_CHAN_INFO_RAW:
-		ret = iio_device_claim_direct_mode(indio_dev);
-		if (ret)
-			return ret;
-
-		ret = ad7606_scan_direct(indio_dev, chan->address);
-		iio_device_release_direct_mode(indio_dev);
-
-		if (ret < 0)
-			return ret;
-		*val = (short)ret;
-		return IIO_VAL_INT;
-	case IIO_CHAN_INFO_SCALE:
-		*val = scale_avail[st->range][0];
-		*val2 = scale_avail[st->range][1];
-		return IIO_VAL_INT_PLUS_MICRO;
-	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
-		*val = st->oversampling;
-		return IIO_VAL_INT;
-	}
-	return -EINVAL;
-}
-
-static ssize_t in_voltage_scale_available_show(struct device *dev,
-					       struct device_attribute *attr,
-					       char *buf)
-{
-	int i, len = 0;
-
-	for (i = 0; i < ARRAY_SIZE(scale_avail); i++)
-		len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%06u ",
-				 scale_avail[i][0], scale_avail[i][1]);
-
-	buf[len - 1] = '\n';
-
-	return len;
-}
-
-static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0);
-
-static int ad7606_oversampling_get_index(unsigned int val)
-{
-	unsigned char supported[] = {1, 2, 4, 8, 16, 32, 64};
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(supported); i++)
-		if (val == supported[i])
-			return i;
-
-	return -EINVAL;
-}
-
-static int ad7606_write_raw(struct iio_dev *indio_dev,
-			    struct iio_chan_spec const *chan,
-			    int val,
-			    int val2,
-			    long mask)
-{
-	struct ad7606_state *st = iio_priv(indio_dev);
-	int values[3];
-	int ret, i;
-
-	switch (mask) {
-	case IIO_CHAN_INFO_SCALE:
-		ret = -EINVAL;
-		mutex_lock(&st->lock);
-		for (i = 0; i < ARRAY_SIZE(scale_avail); i++)
-			if (val2 == scale_avail[i][1]) {
-				gpiod_set_value(st->gpio_range, i);
-				st->range = i;
-
-				ret = 0;
-				break;
-			}
-		mutex_unlock(&st->lock);
-
-		return ret;
-	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
-		if (val2)
-			return -EINVAL;
-		ret = ad7606_oversampling_get_index(val);
-		if (ret < 0)
-			return ret;
-
-		values[0] = (ret >> 0) & 1;
-		values[1] = (ret >> 1) & 1;
-		values[2] = (ret >> 2) & 1;
-
-		mutex_lock(&st->lock);
-		gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc,
-				      values);
-		st->oversampling = val;
-		mutex_unlock(&st->lock);
-
-		return 0;
-	default:
-		return -EINVAL;
-	}
-}
-
-static IIO_CONST_ATTR(oversampling_ratio_available, "1 2 4 8 16 32 64");
-
-static struct attribute *ad7606_attributes_os_and_range[] = {
-	&iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
-	&iio_const_attr_oversampling_ratio_available.dev_attr.attr,
-	NULL,
-};
-
-static const struct attribute_group ad7606_attribute_group_os_and_range = {
-	.attrs = ad7606_attributes_os_and_range,
-};
-
-static struct attribute *ad7606_attributes_os[] = {
-	&iio_const_attr_oversampling_ratio_available.dev_attr.attr,
-	NULL,
-};
-
-static const struct attribute_group ad7606_attribute_group_os = {
-	.attrs = ad7606_attributes_os,
-};
-
-static struct attribute *ad7606_attributes_range[] = {
-	&iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
-	NULL,
-};
-
-static const struct attribute_group ad7606_attribute_group_range = {
-	.attrs = ad7606_attributes_range,
-};
-
-#define AD760X_CHANNEL(num, mask)				\
-	{							\
-		.type = IIO_VOLTAGE,				\
-		.indexed = 1,					\
-		.channel = num,					\
-		.address = num,					\
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
-		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\
-		.info_mask_shared_by_all = mask,		\
-		.scan_index = num,				\
-		.scan_type = {					\
-			.sign = 's',				\
-			.realbits = 16,				\
-			.storagebits = 16,			\
-			.endianness = IIO_CPU,			\
-		},						\
-	}
-
-#define AD7605_CHANNEL(num)	\
-	AD760X_CHANNEL(num, 0)
-
-#define AD7606_CHANNEL(num)	\
-	AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
-
-static const struct iio_chan_spec ad7605_channels[] = {
-	IIO_CHAN_SOFT_TIMESTAMP(4),
-	AD7605_CHANNEL(0),
-	AD7605_CHANNEL(1),
-	AD7605_CHANNEL(2),
-	AD7605_CHANNEL(3),
-};
-
-static const struct iio_chan_spec ad7606_channels[] = {
-	IIO_CHAN_SOFT_TIMESTAMP(8),
-	AD7606_CHANNEL(0),
-	AD7606_CHANNEL(1),
-	AD7606_CHANNEL(2),
-	AD7606_CHANNEL(3),
-	AD7606_CHANNEL(4),
-	AD7606_CHANNEL(5),
-	AD7606_CHANNEL(6),
-	AD7606_CHANNEL(7),
-};
-
-static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
-	/*
-	 * More devices added in future
-	 */
-	[ID_AD7605_4] = {
-		.channels = ad7605_channels,
-		.num_channels = 5,
-	},
-	[ID_AD7606_8] = {
-		.channels = ad7606_channels,
-		.num_channels = 9,
-		.has_oversampling = true,
-	},
-	[ID_AD7606_6] = {
-		.channels = ad7606_channels,
-		.num_channels = 7,
-		.has_oversampling = true,
-	},
-	[ID_AD7606_4] = {
-		.channels = ad7606_channels,
-		.num_channels = 5,
-		.has_oversampling = true,
-	},
-};
-
-static int ad7606_request_gpios(struct ad7606_state *st)
-{
-	struct device *dev = st->dev;
-
-	st->gpio_convst = devm_gpiod_get(dev, "conversion-start",
-					 GPIOD_OUT_LOW);
-	if (IS_ERR(st->gpio_convst))
-		return PTR_ERR(st->gpio_convst);
-
-	st->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
-	if (IS_ERR(st->gpio_reset))
-		return PTR_ERR(st->gpio_reset);
-
-	st->gpio_range = devm_gpiod_get_optional(dev, "range", GPIOD_OUT_LOW);
-	if (IS_ERR(st->gpio_range))
-		return PTR_ERR(st->gpio_range);
-
-	st->gpio_standby = devm_gpiod_get_optional(dev, "standby",
-						   GPIOD_OUT_HIGH);
-	if (IS_ERR(st->gpio_standby))
-		return PTR_ERR(st->gpio_standby);
-
-	st->gpio_frstdata = devm_gpiod_get_optional(dev, "first-data",
-						    GPIOD_IN);
-	if (IS_ERR(st->gpio_frstdata))
-		return PTR_ERR(st->gpio_frstdata);
-
-	if (!st->chip_info->has_oversampling)
-		return 0;
-
-	st->gpio_os = devm_gpiod_get_array_optional(dev, "oversampling-ratio",
-			GPIOD_OUT_LOW);
-	return PTR_ERR_OR_ZERO(st->gpio_os);
-}
-
-/**
- *  Interrupt handler
- */
-static irqreturn_t ad7606_interrupt(int irq, void *dev_id)
-{
-	struct iio_dev *indio_dev = dev_id;
-	struct ad7606_state *st = iio_priv(indio_dev);
-
-	if (iio_buffer_enabled(indio_dev)) {
-		schedule_work(&st->poll_work);
-	} else {
-		st->done = true;
-		wake_up_interruptible(&st->wq_data_avail);
-	}
-
-	return IRQ_HANDLED;
-};
-
-static const struct iio_info ad7606_info_no_os_or_range = {
-	.read_raw = &ad7606_read_raw,
-};
-
-static const struct iio_info ad7606_info_os_and_range = {
-	.read_raw = &ad7606_read_raw,
-	.write_raw = &ad7606_write_raw,
-	.attrs = &ad7606_attribute_group_os_and_range,
-};
-
-static const struct iio_info ad7606_info_os = {
-	.read_raw = &ad7606_read_raw,
-	.write_raw = &ad7606_write_raw,
-	.attrs = &ad7606_attribute_group_os,
-};
-
-static const struct iio_info ad7606_info_range = {
-	.read_raw = &ad7606_read_raw,
-	.write_raw = &ad7606_write_raw,
-	.attrs = &ad7606_attribute_group_range,
-};
-
-int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
-		 const char *name, unsigned int id,
-		 const struct ad7606_bus_ops *bops)
-{
-	struct ad7606_state *st;
-	int ret;
-	struct iio_dev *indio_dev;
-
-	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
-	if (!indio_dev)
-		return -ENOMEM;
-
-	st = iio_priv(indio_dev);
-
-	st->dev = dev;
-	mutex_init(&st->lock);
-	st->bops = bops;
-	st->base_address = base_address;
-	/* tied to logic low, analog input range is +/- 5V */
-	st->range = 0;
-	st->oversampling = 1;
-	INIT_WORK(&st->poll_work, &ad7606_poll_bh_to_ring);
-
-	st->reg = devm_regulator_get(dev, "avcc");
-	if (IS_ERR(st->reg))
-		return PTR_ERR(st->reg);
-
-	ret = regulator_enable(st->reg);
-	if (ret) {
-		dev_err(dev, "Failed to enable specified AVcc supply\n");
-		return ret;
-	}
-
-	st->chip_info = &ad7606_chip_info_tbl[id];
-
-	ret = ad7606_request_gpios(st);
-	if (ret)
-		goto error_disable_reg;
-
-	indio_dev->dev.parent = dev;
-	if (st->gpio_os) {
-		if (st->gpio_range)
-			indio_dev->info = &ad7606_info_os_and_range;
-		else
-			indio_dev->info = &ad7606_info_os;
-	} else {
-		if (st->gpio_range)
-			indio_dev->info = &ad7606_info_range;
-		else
-			indio_dev->info = &ad7606_info_no_os_or_range;
-	}
-	indio_dev->modes = INDIO_DIRECT_MODE;
-	indio_dev->name = name;
-	indio_dev->channels = st->chip_info->channels;
-	indio_dev->num_channels = st->chip_info->num_channels;
-
-	init_waitqueue_head(&st->wq_data_avail);
-
-	ret = ad7606_reset(st);
-	if (ret)
-		dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n");
-
-	ret = request_irq(irq, ad7606_interrupt, IRQF_TRIGGER_FALLING, name,
-			  indio_dev);
-	if (ret)
-		goto error_disable_reg;
-
-	ret = iio_triggered_buffer_setup(indio_dev, &ad7606_trigger_handler,
-					 NULL, NULL);
-	if (ret)
-		goto error_free_irq;
-
-	ret = iio_device_register(indio_dev);
-	if (ret)
-		goto error_unregister_ring;
-
-	dev_set_drvdata(dev, indio_dev);
-
-	return 0;
-error_unregister_ring:
-	iio_triggered_buffer_cleanup(indio_dev);
-
-error_free_irq:
-	free_irq(irq, indio_dev);
-
-error_disable_reg:
-	regulator_disable(st->reg);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(ad7606_probe);
-
-int ad7606_remove(struct device *dev, int irq)
-{
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct ad7606_state *st = iio_priv(indio_dev);
-
-	iio_device_unregister(indio_dev);
-	iio_triggered_buffer_cleanup(indio_dev);
-
-	free_irq(irq, indio_dev);
-	regulator_disable(st->reg);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ad7606_remove);
-
-#ifdef CONFIG_PM_SLEEP
-
-static int ad7606_suspend(struct device *dev)
-{
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct ad7606_state *st = iio_priv(indio_dev);
-
-	if (st->gpio_standby) {
-		gpiod_set_value(st->gpio_range, 1);
-		gpiod_set_value(st->gpio_standby, 0);
-	}
-
-	return 0;
-}
-
-static int ad7606_resume(struct device *dev)
-{
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct ad7606_state *st = iio_priv(indio_dev);
-
-	if (st->gpio_standby) {
-		gpiod_set_value(st->gpio_range, st->range);
-		gpiod_set_value(st->gpio_standby, 1);
-		ad7606_reset(st);
-	}
-
-	return 0;
-}
-
-SIMPLE_DEV_PM_OPS(ad7606_pm_ops, ad7606_suspend, ad7606_resume);
-EXPORT_SYMBOL_GPL(ad7606_pm_ops);
-
-#endif
-
-MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
-MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/adc/ad7606.h b/drivers/staging/iio/adc/ad7606.h
deleted file mode 100644
index 8618805..0000000
--- a/drivers/staging/iio/adc/ad7606.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * AD7606 ADC driver
- *
- * Copyright 2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2.
- */
-
-#ifndef IIO_ADC_AD7606_H_
-#define IIO_ADC_AD7606_H_
-
-/**
- * struct ad7606_chip_info - chip specific information
- * @channels:		channel specification
- * @num_channels:	number of channels
- * @has_oversampling:   whether the device has oversampling support
- */
-
-struct ad7606_chip_info {
-	const struct iio_chan_spec	*channels;
-	unsigned int			num_channels;
-	bool				has_oversampling;
-};
-
-/**
- * struct ad7606_state - driver instance specific data
- * @dev		pointer to kernel device
- * @chip_info		entry in the table of chips that describes this device
- * @reg		regulator info for the the power supply of the device
- * @poll_work		work struct for continuously reading data from the device
- *			into an IIO triggered buffer
- * @wq_data_avail	wait queue struct for buffer mode
- * @bops		bus operations (SPI or parallel)
- * @range		voltage range selection, selects which scale to apply
- * @oversampling	oversampling selection
- * @done		marks whether reading data is done
- * @base_address	address from where to read data in parallel operation
- * @lock		protect sensor state from concurrent accesses to GPIOs
- * @gpio_convst	GPIO descriptor for conversion start signal (CONVST)
- * @gpio_reset		GPIO descriptor for device hard-reset
- * @gpio_range		GPIO descriptor for range selection
- * @gpio_standby	GPIO descriptor for stand-by signal (STBY),
- *			controls power-down mode of device
- * @gpio_frstdata	GPIO descriptor for reading from device when data
- *			is being read on the first channel
- * @gpio_os		GPIO descriptors to control oversampling on the device
- * @data		buffer for reading data from the device
- */
-
-struct ad7606_state {
-	struct device			*dev;
-	const struct ad7606_chip_info	*chip_info;
-	struct regulator		*reg;
-	struct work_struct		poll_work;
-	wait_queue_head_t		wq_data_avail;
-	const struct ad7606_bus_ops	*bops;
-	unsigned int			range;
-	unsigned int			oversampling;
-	bool				done;
-	void __iomem			*base_address;
-
-	struct mutex			lock; /* protect sensor state */
-	struct gpio_desc		*gpio_convst;
-	struct gpio_desc		*gpio_reset;
-	struct gpio_desc		*gpio_range;
-	struct gpio_desc		*gpio_standby;
-	struct gpio_desc		*gpio_frstdata;
-	struct gpio_descs		*gpio_os;
-
-	/*
-	 * DMA (thus cache coherency maintenance) requires the
-	 * transfer buffers to live in their own cache lines.
-	 * 8 * 16-bit samples + 64-bit timestamp
-	 */
-	unsigned short			data[12] ____cacheline_aligned;
-};
-
-/**
- * struct ad7606_bus_ops - driver bus operations
- * @read_block		function pointer for reading blocks of data
- */
-struct ad7606_bus_ops {
-	/* more methods added in future? */
-	int (*read_block)(struct device *dev, int num, void *data);
-};
-
-int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
-		 const char *name, unsigned int id,
-		 const struct ad7606_bus_ops *bops);
-int ad7606_remove(struct device *dev, int irq);
-
-enum ad7606_supported_device_ids {
-	ID_AD7605_4,
-	ID_AD7606_8,
-	ID_AD7606_6,
-	ID_AD7606_4
-};
-
-#ifdef CONFIG_PM_SLEEP
-extern const struct dev_pm_ops ad7606_pm_ops;
-#define AD7606_PM_OPS (&ad7606_pm_ops)
-#else
-#define AD7606_PM_OPS NULL
-#endif
-
-#endif /* IIO_ADC_AD7606_H_ */
diff --git a/drivers/staging/iio/adc/ad7606_par.c b/drivers/staging/iio/adc/ad7606_par.c
deleted file mode 100644
index 8bd86e7..0000000
--- a/drivers/staging/iio/adc/ad7606_par.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * AD7606 Parallel Interface ADC driver
- *
- * Copyright 2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <linux/iio/iio.h>
-#include "ad7606.h"
-
-static int ad7606_par16_read_block(struct device *dev,
-				   int count, void *buf)
-{
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct ad7606_state *st = iio_priv(indio_dev);
-
-	insw((unsigned long)st->base_address, buf, count);
-
-	return 0;
-}
-
-static const struct ad7606_bus_ops ad7606_par16_bops = {
-	.read_block	= ad7606_par16_read_block,
-};
-
-static int ad7606_par8_read_block(struct device *dev,
-				  int count, void *buf)
-{
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct ad7606_state *st = iio_priv(indio_dev);
-
-	insb((unsigned long)st->base_address, buf, count * 2);
-
-	return 0;
-}
-
-static const struct ad7606_bus_ops ad7606_par8_bops = {
-	.read_block	= ad7606_par8_read_block,
-};
-
-static int ad7606_par_probe(struct platform_device *pdev)
-{
-	const struct platform_device_id *id = platform_get_device_id(pdev);
-	struct resource *res;
-	void __iomem *addr;
-	resource_size_t remap_size;
-	int irq;
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "no irq: %d\n", irq);
-		return irq;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	addr = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(addr))
-		return PTR_ERR(addr);
-
-	remap_size = resource_size(res);
-
-	return ad7606_probe(&pdev->dev, irq, addr,
-			    id->name, id->driver_data,
-			    remap_size > 1 ? &ad7606_par16_bops :
-			    &ad7606_par8_bops);
-}
-
-static int ad7606_par_remove(struct platform_device *pdev)
-{
-	return ad7606_remove(&pdev->dev, platform_get_irq(pdev, 0));
-}
-
-static const struct platform_device_id ad7606_driver_ids[] = {
-	{
-		.name		= "ad7605-4",
-		.driver_data	= ID_AD7605_4,
-	}, {
-		.name		= "ad7606-8",
-		.driver_data	= ID_AD7606_8,
-	}, {
-		.name		= "ad7606-6",
-		.driver_data	= ID_AD7606_6,
-	}, {
-		.name		= "ad7606-4",
-		.driver_data	= ID_AD7606_4,
-	},
-	{ }
-};
-
-MODULE_DEVICE_TABLE(platform, ad7606_driver_ids);
-
-static struct platform_driver ad7606_driver = {
-	.probe = ad7606_par_probe,
-	.remove	= ad7606_par_remove,
-	.id_table = ad7606_driver_ids,
-	.driver = {
-		.name	 = "ad7606",
-		.pm	 = AD7606_PM_OPS,
-	},
-};
-
-module_platform_driver(ad7606_driver);
-
-MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
-MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/adc/ad7606_spi.c b/drivers/staging/iio/adc/ad7606_spi.c
deleted file mode 100644
index b76ca5a..0000000
--- a/drivers/staging/iio/adc/ad7606_spi.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * AD7606 SPI ADC driver
- *
- * Copyright 2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2.
- */
-
-#include <linux/module.h>
-#include <linux/spi/spi.h>
-#include <linux/types.h>
-#include <linux/err.h>
-
-#include <linux/iio/iio.h>
-#include "ad7606.h"
-
-#define MAX_SPI_FREQ_HZ		23500000	/* VDRIVE above 4.75 V */
-
-static int ad7606_spi_read_block(struct device *dev,
-				 int count, void *buf)
-{
-	struct spi_device *spi = to_spi_device(dev);
-	int i, ret;
-	unsigned short *data = buf;
-	__be16 *bdata = buf;
-
-	ret = spi_read(spi, buf, count * 2);
-	if (ret < 0) {
-		dev_err(&spi->dev, "SPI read error\n");
-		return ret;
-	}
-
-	for (i = 0; i < count; i++)
-		data[i] = be16_to_cpu(bdata[i]);
-
-	return 0;
-}
-
-static const struct ad7606_bus_ops ad7606_spi_bops = {
-	.read_block	= ad7606_spi_read_block,
-};
-
-static int ad7606_spi_probe(struct spi_device *spi)
-{
-	const struct spi_device_id *id = spi_get_device_id(spi);
-
-	return ad7606_probe(&spi->dev, spi->irq, NULL,
-			    id->name, id->driver_data,
-			    &ad7606_spi_bops);
-}
-
-static int ad7606_spi_remove(struct spi_device *spi)
-{
-	return ad7606_remove(&spi->dev, spi->irq);
-}
-
-static const struct spi_device_id ad7606_id[] = {
-	{"ad7605-4", ID_AD7605_4},
-	{"ad7606-8", ID_AD7606_8},
-	{"ad7606-6", ID_AD7606_6},
-	{"ad7606-4", ID_AD7606_4},
-	{}
-};
-MODULE_DEVICE_TABLE(spi, ad7606_id);
-
-static struct spi_driver ad7606_driver = {
-	.driver = {
-		.name = "ad7606",
-		.pm = AD7606_PM_OPS,
-	},
-	.probe = ad7606_spi_probe,
-	.remove = ad7606_spi_remove,
-	.id_table = ad7606_id,
-};
-module_spi_driver(ad7606_driver);
-
-MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
-MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
-MODULE_LICENSE("GPL v2");
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH v4 1/2] staging: iio: ad7606: Move out of staging
  2018-12-10 11:03 [PATCH v4 1/2] staging: iio: ad7606: Move out of staging Stefan Popa
@ 2018-12-10 21:34 ` Jonathan Cameron
  2018-12-11 17:57 ` Jonathan Cameron
  1 sibling, 0 replies; 3+ messages in thread
From: Jonathan Cameron @ 2018-12-10 21:34 UTC (permalink / raw)
  To: Stefan Popa
  Cc: Michael.Hennerich, knaack.h, lars, pmeerw, gregkh, linux-kernel,
	linux-iio, devel

On Mon, 10 Dec 2018 13:03:33 +0200
Stefan Popa <stefan.popa@analog.com> wrote:

> Move ad7606 ADC driver out of staging and into the mainline.
> 
> Signed-off-by: Stefan Popa <stefan.popa@analog.com>

Looks good to me.  I'll let it sit for a few days though to give
time for a final review from anyone else who wants to and for
Rob to take a final look at the bindings if he wants to.

Thanks,

Jonathan

> ---
> Changes in v2:
> 	- Simplified the Kconfig menu.
> 	- Added SPDX-License-Identifier.
> 	- Ordered the includes alphabetically.
> 	- Used a threaded interrupt.
> 	- Replaced ad7606_poll_bh_to_ring() with ad7606_trigger_handler().
> 	- Used a trigger. 
> 	- Replaced wait_event_interruptible() with wait_for_completion_timeout().
> 	- Replaced wake_up_interruptible() with complete().
> 	- Used devm_iio_triggered_buffer_setup().
> 	- Added buffer_ops.
> 	- Used single line comments where needed.
> 	- Removed the gap between docs and struct.
> 	- Added ad7606_of_match[].
> Changes in v3:
> 	- Added a comment which offers more information of the way the interrupt
> 	  is triggered.
> 	- Fixed the way a new conversion is triggered.
> 	- endianness = IIO_CPU
> 	- Removed unnecessary mutex locks.
> 	- Removed the buffer_postdisable ops and replaced it with buffer_predisable.
> 	- Added a devm_add_action_or_reset() which deals with regulator_disable().
> 	- Misc style fixes.
> Changes in v4:
> 	- Removed unused fields from the ad7606_state struct.
> 	- Used the find_closest() macro when searching for the available scale
> 	and the oversampling ratios.
> 
>  MAINTAINERS                          |   7 +
>  drivers/iio/adc/Kconfig              |  28 ++
>  drivers/iio/adc/Makefile             |   3 +
>  drivers/iio/adc/ad7606.c             | 588 +++++++++++++++++++++++++++++++++++
>  drivers/iio/adc/ad7606.h             |  99 ++++++
>  drivers/iio/adc/ad7606_par.c         | 105 +++++++
>  drivers/iio/adc/ad7606_spi.c         |  82 +++++
>  drivers/staging/iio/adc/Kconfig      |  34 --
>  drivers/staging/iio/adc/Makefile     |   3 -
>  drivers/staging/iio/adc/ad7606.c     | 565 ---------------------------------
>  drivers/staging/iio/adc/ad7606.h     | 106 -------
>  drivers/staging/iio/adc/ad7606_par.c | 113 -------
>  drivers/staging/iio/adc/ad7606_spi.c |  79 -----
>  13 files changed, 912 insertions(+), 900 deletions(-)
>  create mode 100644 drivers/iio/adc/ad7606.c
>  create mode 100644 drivers/iio/adc/ad7606.h
>  create mode 100644 drivers/iio/adc/ad7606_par.c
>  create mode 100644 drivers/iio/adc/ad7606_spi.c
>  delete mode 100644 drivers/staging/iio/adc/ad7606.c
>  delete mode 100644 drivers/staging/iio/adc/ad7606.h
>  delete mode 100644 drivers/staging/iio/adc/ad7606_par.c
>  delete mode 100644 drivers/staging/iio/adc/ad7606_spi.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f642044..843545d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -839,6 +839,13 @@ S:	Supported
>  F:	drivers/iio/dac/ad5758.c
>  F:	Documentation/devicetree/bindings/iio/dac/ad5758.txt
>  
> +ANALOG DEVICES INC AD7606 DRIVER
> +M:	Stefan Popa <stefan.popa@analog.com>
> +L:	linux-iio@vger.kernel.org
> +W:	http://ez.analog.com/community/linux-device-drivers
> +S:	Supported
> +F:	drivers/iio/adc/ad7606.c
> +
>  ANALOG DEVICES INC AD9389B DRIVER
>  M:	Hans Verkuil <hans.verkuil@cisco.com>
>  L:	linux-media@vger.kernel.org
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index a52fea8..c3f61c9 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -58,6 +58,34 @@ config AD7476
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called ad7476.
>  
> +config AD7606
> +	tristate
> +	depends on GPIOLIB || COMPILE_TEST
> +	depends on HAS_IOMEM
> +	select IIO_BUFFER
> +	select IIO_TRIGGERED_BUFFER
> +
> +config AD7606_IFACE_PARALLEL
> +	tristate "Analog Devices AD7606 ADC driver with parallel interface support"
> +	select AD7606
> +	help
> +	  Say yes here to build parallel interface support for Analog Devices:
> +	  ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called ad7606_parallel.
> +
> +config AD7606_IFACE_SPI
> +	tristate "Analog Devices AD7606 ADC driver with spi interface support"
> +	depends on SPI
> +	select AD7606
> +	help
> +	  Say yes here to build spi interface support for Analog Devices:
> +	  ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called ad7606_spi.
> +
>  config AD7766
>  	tristate "Analog Devices AD7766/AD7767 ADC driver"
>  	depends on SPI_MASTER
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index a6e6a0b..b734f4f 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -8,6 +8,9 @@ obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
>  obj-$(CONFIG_AD7266) += ad7266.o
>  obj-$(CONFIG_AD7291) += ad7291.o
>  obj-$(CONFIG_AD7298) += ad7298.o
> +obj-$(CONFIG_AD7606_IFACE_PARALLEL) += ad7606_par.o
> +obj-$(CONFIG_AD7606_IFACE_SPI) += ad7606_spi.o
> +obj-$(CONFIG_AD7606) += ad7606.o
>  obj-$(CONFIG_AD7923) += ad7923.o
>  obj-$(CONFIG_AD7476) += ad7476.o
>  obj-$(CONFIG_AD7766) += ad7766.o
> diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
> new file mode 100644
> index 0000000..fa3c8e0
> --- /dev/null
> +++ b/drivers/iio/adc/ad7606.c
> @@ -0,0 +1,588 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * AD7606 SPI ADC driver
> + *
> + * Copyright 2011 Analog Devices Inc.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/sched.h>
> +#include <linux/slab.h>
> +#include <linux/sysfs.h>
> +#include <linux/util_macros.h>
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/iio/trigger.h>
> +#include <linux/iio/triggered_buffer.h>
> +#include <linux/iio/trigger_consumer.h>
> +
> +#include "ad7606.h"
> +
> +/*
> + * Scales are computed as 5000/32768 and 10000/32768 respectively,
> + * so that when applied to the raw values they provide mV values
> + */
> +static const unsigned int scale_avail[2] = {
> +	152588, 305176
> +};
> +
> +static const unsigned int ad7606_oversampling_avail[7] = {
> +	1, 2, 4, 8, 16, 32, 64,
> +};
> +
> +static int ad7606_reset(struct ad7606_state *st)
> +{
> +	if (st->gpio_reset) {
> +		gpiod_set_value(st->gpio_reset, 1);
> +		ndelay(100); /* t_reset >= 100ns */
> +		gpiod_set_value(st->gpio_reset, 0);
> +		return 0;
> +	}
> +
> +	return -ENODEV;
> +}
> +
> +static int ad7606_read_samples(struct ad7606_state *st)
> +{
> +	unsigned int num = st->chip_info->num_channels;
> +	u16 *data = st->data;
> +	int ret;
> +
> +	/*
> +	 * The frstdata signal is set to high while and after reading the sample
> +	 * of the first channel and low for all other channels. This can be used
> +	 * to check that the incoming data is correctly aligned. During normal
> +	 * operation the data should never become unaligned, but some glitch or
> +	 * electrostatic discharge might cause an extra read or clock cycle.
> +	 * Monitoring the frstdata signal allows to recover from such failure
> +	 * situations.
> +	 */
> +
> +	if (st->gpio_frstdata) {
> +		ret = st->bops->read_block(st->dev, 1, data);
> +		if (ret)
> +			return ret;
> +
> +		if (!gpiod_get_value(st->gpio_frstdata)) {
> +			ad7606_reset(st);
> +			return -EIO;
> +		}
> +
> +		data++;
> +		num--;
> +	}
> +
> +	return st->bops->read_block(st->dev, num, data);
> +}
> +
> +static irqreturn_t ad7606_trigger_handler(int irq, void *p)
> +{
> +	struct iio_poll_func *pf = p;
> +	struct iio_dev *indio_dev = pf->indio_dev;
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +	int ret;
> +
> +	mutex_lock(&st->lock);
> +
> +	ret = ad7606_read_samples(st);
> +	if (ret == 0)
> +		iio_push_to_buffers_with_timestamp(indio_dev, st->data,
> +						   iio_get_time_ns(indio_dev));
> +
> +	iio_trigger_notify_done(indio_dev->trig);
> +	/* The rising edge of the CONVST signal starts a new conversion. */
> +	gpiod_set_value(st->gpio_convst, 1);
> +
> +	mutex_unlock(&st->lock);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int ad7606_scan_direct(struct iio_dev *indio_dev, unsigned int ch)
> +{
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +	int ret;
> +
> +	gpiod_set_value(st->gpio_convst, 1);
> +	ret = wait_for_completion_timeout(&st->completion,
> +					  msecs_to_jiffies(1000));
> +	if (!ret) {
> +		ret = -ETIMEDOUT;
> +		goto error_ret;
> +	}
> +
> +	ret = ad7606_read_samples(st);
> +	if (ret == 0)
> +		ret = st->data[ch];
> +
> +error_ret:
> +	gpiod_set_value(st->gpio_convst, 0);
> +
> +	return ret;
> +}
> +
> +static int ad7606_read_raw(struct iio_dev *indio_dev,
> +			   struct iio_chan_spec const *chan,
> +			   int *val,
> +			   int *val2,
> +			   long m)
> +{
> +	int ret;
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +
> +	switch (m) {
> +	case IIO_CHAN_INFO_RAW:
> +		ret = iio_device_claim_direct_mode(indio_dev);
> +		if (ret)
> +			return ret;
> +
> +		ret = ad7606_scan_direct(indio_dev, chan->address);
> +		iio_device_release_direct_mode(indio_dev);
> +
> +		if (ret < 0)
> +			return ret;
> +		*val = (short)ret;
> +		return IIO_VAL_INT;
> +	case IIO_CHAN_INFO_SCALE:
> +		*val = 0;
> +		*val2 = scale_avail[st->range];
> +		return IIO_VAL_INT_PLUS_MICRO;
> +	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> +		*val = st->oversampling;
> +		return IIO_VAL_INT;
> +	}
> +	return -EINVAL;
> +}
> +
> +static ssize_t in_voltage_scale_available_show(struct device *dev,
> +					       struct device_attribute *attr,
> +					       char *buf)
> +{
> +	int i, len = 0;
> +
> +	for (i = 0; i < ARRAY_SIZE(scale_avail); i++)
> +		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
> +				 scale_avail[i]);
> +
> +	buf[len - 1] = '\n';
> +
> +	return len;
> +}
> +
> +static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0);
> +
> +static int ad7606_write_raw(struct iio_dev *indio_dev,
> +			    struct iio_chan_spec const *chan,
> +			    int val,
> +			    int val2,
> +			    long mask)
> +{
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +	int values[3], i;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_SCALE:
> +		mutex_lock(&st->lock);
> +		i = find_closest(val2, scale_avail, ARRAY_SIZE(scale_avail));
> +		gpiod_set_value(st->gpio_range, i);
> +		st->range = i;
> +		mutex_unlock(&st->lock);
> +
> +		return 0;
> +	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> +		if (val2)
> +			return -EINVAL;
> +		i = find_closest(val, ad7606_oversampling_avail,
> +				 ARRAY_SIZE(ad7606_oversampling_avail));
> +
> +		values[0] = (i >> 0) & 1;
> +		values[1] = (i >> 1) & 1;
> +		values[2] = (i >> 2) & 1;
> +
> +		mutex_lock(&st->lock);
> +		gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc,
> +				      values);
> +		st->oversampling = ad7606_oversampling_avail[i];
> +		mutex_unlock(&st->lock);
> +
> +		return 0;
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static IIO_CONST_ATTR(oversampling_ratio_available, "1 2 4 8 16 32 64");
> +
> +static struct attribute *ad7606_attributes_os_and_range[] = {
> +	&iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
> +	&iio_const_attr_oversampling_ratio_available.dev_attr.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group ad7606_attribute_group_os_and_range = {
> +	.attrs = ad7606_attributes_os_and_range,
> +};
> +
> +static struct attribute *ad7606_attributes_os[] = {
> +	&iio_const_attr_oversampling_ratio_available.dev_attr.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group ad7606_attribute_group_os = {
> +	.attrs = ad7606_attributes_os,
> +};
> +
> +static struct attribute *ad7606_attributes_range[] = {
> +	&iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group ad7606_attribute_group_range = {
> +	.attrs = ad7606_attributes_range,
> +};
> +
> +#define AD760X_CHANNEL(num, mask) {				\
> +		.type = IIO_VOLTAGE,				\
> +		.indexed = 1,					\
> +		.channel = num,					\
> +		.address = num,					\
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
> +		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\
> +		.info_mask_shared_by_all = mask,		\
> +		.scan_index = num,				\
> +		.scan_type = {					\
> +			.sign = 's',				\
> +			.realbits = 16,				\
> +			.storagebits = 16,			\
> +			.endianness = IIO_CPU,			\
> +		},						\
> +}
> +
> +#define AD7605_CHANNEL(num)	\
> +	AD760X_CHANNEL(num, 0)
> +
> +#define AD7606_CHANNEL(num)	\
> +	AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
> +
> +static const struct iio_chan_spec ad7605_channels[] = {
> +	IIO_CHAN_SOFT_TIMESTAMP(4),
> +	AD7605_CHANNEL(0),
> +	AD7605_CHANNEL(1),
> +	AD7605_CHANNEL(2),
> +	AD7605_CHANNEL(3),
> +};
> +
> +static const struct iio_chan_spec ad7606_channels[] = {
> +	IIO_CHAN_SOFT_TIMESTAMP(8),
> +	AD7606_CHANNEL(0),
> +	AD7606_CHANNEL(1),
> +	AD7606_CHANNEL(2),
> +	AD7606_CHANNEL(3),
> +	AD7606_CHANNEL(4),
> +	AD7606_CHANNEL(5),
> +	AD7606_CHANNEL(6),
> +	AD7606_CHANNEL(7),
> +};
> +
> +static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
> +	/* More devices added in future */
> +	[ID_AD7605_4] = {
> +		.channels = ad7605_channels,
> +		.num_channels = 5,
> +	},
> +	[ID_AD7606_8] = {
> +		.channels = ad7606_channels,
> +		.num_channels = 9,
> +		.has_oversampling = true,
> +	},
> +	[ID_AD7606_6] = {
> +		.channels = ad7606_channels,
> +		.num_channels = 7,
> +		.has_oversampling = true,
> +	},
> +	[ID_AD7606_4] = {
> +		.channels = ad7606_channels,
> +		.num_channels = 5,
> +		.has_oversampling = true,
> +	},
> +};
> +
> +static int ad7606_request_gpios(struct ad7606_state *st)
> +{
> +	struct device *dev = st->dev;
> +
> +	st->gpio_convst = devm_gpiod_get(dev, "adi,conversion-start",
> +					 GPIOD_OUT_LOW);
> +	if (IS_ERR(st->gpio_convst))
> +		return PTR_ERR(st->gpio_convst);
> +
> +	st->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> +	if (IS_ERR(st->gpio_reset))
> +		return PTR_ERR(st->gpio_reset);
> +
> +	st->gpio_range = devm_gpiod_get_optional(dev, "adi,range",
> +						 GPIOD_OUT_LOW);
> +	if (IS_ERR(st->gpio_range))
> +		return PTR_ERR(st->gpio_range);
> +
> +	st->gpio_standby = devm_gpiod_get_optional(dev, "standby",
> +						   GPIOD_OUT_HIGH);
> +	if (IS_ERR(st->gpio_standby))
> +		return PTR_ERR(st->gpio_standby);
> +
> +	st->gpio_frstdata = devm_gpiod_get_optional(dev, "adi,first-data",
> +						    GPIOD_IN);
> +	if (IS_ERR(st->gpio_frstdata))
> +		return PTR_ERR(st->gpio_frstdata);
> +
> +	if (!st->chip_info->has_oversampling)
> +		return 0;
> +
> +	st->gpio_os = devm_gpiod_get_array_optional(dev,
> +						    "adi,oversampling-ratio",
> +						    GPIOD_OUT_LOW);
> +	return PTR_ERR_OR_ZERO(st->gpio_os);
> +}
> +
> +/*
> + * The BUSY signal indicates when conversions are in progress, so when a rising
> + * edge of CONVST is applied, BUSY goes logic high and transitions low at the
> + * end of the entire conversion process. The falling edge of the BUSY signal
> + * triggers this interrupt.
> + */
> +static irqreturn_t ad7606_interrupt(int irq, void *dev_id)
> +{
> +	struct iio_dev *indio_dev = dev_id;
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +
> +	if (iio_buffer_enabled(indio_dev)) {
> +		gpiod_set_value(st->gpio_convst, 0);
> +		iio_trigger_poll_chained(st->trig);
> +	} else {
> +		complete(&st->completion);
> +	}
> +
> +	return IRQ_HANDLED;
> +};
> +
> +static int ad7606_validate_trigger(struct iio_dev *indio_dev,
> +				   struct iio_trigger *trig)
> +{
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +
> +	if (st->trig != trig)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
> +static int ad7606_buffer_postenable(struct iio_dev *indio_dev)
> +{
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +
> +	iio_triggered_buffer_postenable(indio_dev);
> +	gpiod_set_value(st->gpio_convst, 1);
> +
> +	return 0;
> +}
> +
> +static int ad7606_buffer_predisable(struct iio_dev *indio_dev)
> +{
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +	int ret;
> +
> +	reinit_completion(&st->completion);
> +	gpiod_set_value(st->gpio_convst, 1);
> +	ret = wait_for_completion_timeout(&st->completion,
> +					  msecs_to_jiffies(1000));
> +	gpiod_set_value(st->gpio_convst, 0);
> +
> +	return iio_triggered_buffer_predisable(indio_dev);
> +}
> +
> +static const struct iio_buffer_setup_ops ad7606_buffer_ops = {
> +	.postenable = &ad7606_buffer_postenable,
> +	.predisable = &ad7606_buffer_predisable,
> +};
> +
> +static const struct iio_info ad7606_info_no_os_or_range = {
> +	.read_raw = &ad7606_read_raw,
> +	.validate_trigger = &ad7606_validate_trigger,
> +};
> +
> +static const struct iio_info ad7606_info_os_and_range = {
> +	.read_raw = &ad7606_read_raw,
> +	.write_raw = &ad7606_write_raw,
> +	.attrs = &ad7606_attribute_group_os_and_range,
> +	.validate_trigger = &ad7606_validate_trigger,
> +};
> +
> +static const struct iio_info ad7606_info_os = {
> +	.read_raw = &ad7606_read_raw,
> +	.write_raw = &ad7606_write_raw,
> +	.attrs = &ad7606_attribute_group_os,
> +	.validate_trigger = &ad7606_validate_trigger,
> +};
> +
> +static const struct iio_info ad7606_info_range = {
> +	.read_raw = &ad7606_read_raw,
> +	.write_raw = &ad7606_write_raw,
> +	.attrs = &ad7606_attribute_group_range,
> +	.validate_trigger = &ad7606_validate_trigger,
> +};
> +
> +static const struct iio_trigger_ops ad7606_trigger_ops = {
> +	.validate_device = iio_trigger_validate_own_device,
> +};
> +
> +static void ad7606_regulator_disable(void *data)
> +{
> +	struct ad7606_state *st = data;
> +
> +	regulator_disable(st->reg);
> +}
> +
> +int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> +		 const char *name, unsigned int id,
> +		 const struct ad7606_bus_ops *bops)
> +{
> +	struct ad7606_state *st;
> +	int ret;
> +	struct iio_dev *indio_dev;
> +
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	st = iio_priv(indio_dev);
> +	dev_set_drvdata(dev, indio_dev);
> +
> +	st->dev = dev;
> +	mutex_init(&st->lock);
> +	st->bops = bops;
> +	st->base_address = base_address;
> +	st->oversampling = 1;
> +
> +	st->reg = devm_regulator_get(dev, "avcc");
> +	if (IS_ERR(st->reg))
> +		return PTR_ERR(st->reg);
> +
> +	ret = regulator_enable(st->reg);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable specified AVcc supply\n");
> +		return ret;
> +	}
> +
> +	ret = devm_add_action_or_reset(dev, ad7606_regulator_disable, st);
> +	if (ret)
> +		return ret;
> +
> +	st->chip_info = &ad7606_chip_info_tbl[id];
> +
> +	ret = ad7606_request_gpios(st);
> +	if (ret)
> +		return ret;
> +
> +	indio_dev->dev.parent = dev;
> +	if (st->gpio_os) {
> +		if (st->gpio_range)
> +			indio_dev->info = &ad7606_info_os_and_range;
> +		else
> +			indio_dev->info = &ad7606_info_os;
> +	} else {
> +		if (st->gpio_range)
> +			indio_dev->info = &ad7606_info_range;
> +		else
> +			indio_dev->info = &ad7606_info_no_os_or_range;
> +	}
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->name = name;
> +	indio_dev->channels = st->chip_info->channels;
> +	indio_dev->num_channels = st->chip_info->num_channels;
> +
> +	ret = ad7606_reset(st);
> +	if (ret)
> +		dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n");
> +
> +	st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
> +					  indio_dev->name, indio_dev->id);
> +	if (st->trig == NULL)
> +		return -ENOMEM;
> +
> +	st->trig->ops = &ad7606_trigger_ops;
> +	st->trig->dev.parent = dev;
> +	iio_trigger_set_drvdata(st->trig, indio_dev);
> +	ret = devm_iio_trigger_register(dev, st->trig);
> +	if (ret)
> +		return ret;
> +
> +	indio_dev->trig = iio_trigger_get(st->trig);
> +
> +	init_completion(&st->completion);
> +
> +	ret = devm_request_threaded_irq(dev, irq,
> +					NULL,
> +					&ad7606_interrupt,
> +					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> +					name, indio_dev);
> +	if (ret)
> +		return ret;
> +
> +	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
> +					      &iio_pollfunc_store_time,
> +					      &ad7606_trigger_handler,
> +					      &ad7606_buffer_ops);
> +	if (ret)
> +		return ret;
> +
> +	return devm_iio_device_register(dev, indio_dev);
> +

Real nitpick.  No point in blank line here.  I'll probably take the view
this is so trivial I'll just fix it when applying (or forget about it).

> +}
> +EXPORT_SYMBOL_GPL(ad7606_probe);
> +
> +#ifdef CONFIG_PM_SLEEP
> +
> +static int ad7606_suspend(struct device *dev)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +
> +	if (st->gpio_standby) {
> +		gpiod_set_value(st->gpio_range, 1);
> +		gpiod_set_value(st->gpio_standby, 0);
> +	}
> +
> +	return 0;
> +}
> +
> +static int ad7606_resume(struct device *dev)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +
> +	if (st->gpio_standby) {
> +		gpiod_set_value(st->gpio_range, st->range);
> +		gpiod_set_value(st->gpio_standby, 1);
> +		ad7606_reset(st);
> +	}
> +
> +	return 0;
> +}
> +
> +SIMPLE_DEV_PM_OPS(ad7606_pm_ops, ad7606_suspend, ad7606_resume);
> +EXPORT_SYMBOL_GPL(ad7606_pm_ops);
> +
> +#endif
> +
> +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
> +MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h
> new file mode 100644
> index 0000000..40433af
> --- /dev/null
> +++ b/drivers/iio/adc/ad7606.h
> @@ -0,0 +1,99 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * AD7606 ADC driver
> + *
> + * Copyright 2011 Analog Devices Inc.
> + */
> +
> +#ifndef IIO_ADC_AD7606_H_
> +#define IIO_ADC_AD7606_H_
> +
> +/**
> + * struct ad7606_chip_info - chip specific information
> + * @channels:		channel specification
> + * @num_channels:	number of channels
> + * @has_oversampling:   whether the device has oversampling support
> + */
> +struct ad7606_chip_info {
> +	const struct iio_chan_spec	*channels;
> +	unsigned int			num_channels;
> +	bool				has_oversampling;
> +};
> +
> +/**
> + * struct ad7606_state - driver instance specific data
> + * @dev		pointer to kernel device
> + * @chip_info		entry in the table of chips that describes this device
> + * @reg		regulator info for the the power supply of the device
> + * @bops		bus operations (SPI or parallel)
> + * @range		voltage range selection, selects which scale to apply
> + * @oversampling	oversampling selection
> + * @base_address	address from where to read data in parallel operation
> + * @lock		protect sensor state from concurrent accesses to GPIOs
> + * @gpio_convst	GPIO descriptor for conversion start signal (CONVST)
> + * @gpio_reset		GPIO descriptor for device hard-reset
> + * @gpio_range		GPIO descriptor for range selection
> + * @gpio_standby	GPIO descriptor for stand-by signal (STBY),
> + *			controls power-down mode of device
> + * @gpio_frstdata	GPIO descriptor for reading from device when data
> + *			is being read on the first channel
> + * @gpio_os		GPIO descriptors to control oversampling on the device
> + * @complete		completion to indicate end of conversion
> + * @trig		The IIO trigger associated with the device.
> + * @data		buffer for reading data from the device
> + */
> +struct ad7606_state {
> +	struct device			*dev;
> +	const struct ad7606_chip_info	*chip_info;
> +	struct regulator		*reg;
> +	const struct ad7606_bus_ops	*bops;
> +	unsigned int			range;
> +	unsigned int			oversampling;
> +	void __iomem			*base_address;
> +
> +	struct mutex			lock; /* protect sensor state */
> +	struct gpio_desc		*gpio_convst;
> +	struct gpio_desc		*gpio_reset;
> +	struct gpio_desc		*gpio_range;
> +	struct gpio_desc		*gpio_standby;
> +	struct gpio_desc		*gpio_frstdata;
> +	struct gpio_descs		*gpio_os;
> +	struct iio_trigger		*trig;
> +	struct completion		completion;
> +
> +	/*
> +	 * DMA (thus cache coherency maintenance) requires the
> +	 * transfer buffers to live in their own cache lines.
> +	 * 8 * 16-bit samples + 64-bit timestamp
> +	 */
> +	unsigned short			data[12] ____cacheline_aligned;
> +};
> +
> +/**
> + * struct ad7606_bus_ops - driver bus operations
> + * @read_block		function pointer for reading blocks of data
> + */
> +struct ad7606_bus_ops {
> +	/* more methods added in future? */
> +	int (*read_block)(struct device *dev, int num, void *data);
> +};
> +
> +int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> +		 const char *name, unsigned int id,
> +		 const struct ad7606_bus_ops *bops);
> +
> +enum ad7606_supported_device_ids {
> +	ID_AD7605_4,
> +	ID_AD7606_8,
> +	ID_AD7606_6,
> +	ID_AD7606_4
> +};
> +
> +#ifdef CONFIG_PM_SLEEP
> +extern const struct dev_pm_ops ad7606_pm_ops;
> +#define AD7606_PM_OPS (&ad7606_pm_ops)
> +#else
> +#define AD7606_PM_OPS NULL
> +#endif
> +
> +#endif /* IIO_ADC_AD7606_H_ */
> diff --git a/drivers/iio/adc/ad7606_par.c b/drivers/iio/adc/ad7606_par.c
> new file mode 100644
> index 0000000..32c7069
> --- /dev/null
> +++ b/drivers/iio/adc/ad7606_par.c
> @@ -0,0 +1,105 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * AD7606 Parallel Interface ADC driver
> + *
> + * Copyright 2011 Analog Devices Inc.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/types.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +
> +#include <linux/iio/iio.h>
> +#include "ad7606.h"
> +
> +static int ad7606_par16_read_block(struct device *dev,
> +				   int count, void *buf)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +
> +	insw((unsigned long)st->base_address, buf, count);
> +
> +	return 0;
> +}
> +
> +static const struct ad7606_bus_ops ad7606_par16_bops = {
> +	.read_block = ad7606_par16_read_block,
> +};
> +
> +static int ad7606_par8_read_block(struct device *dev,
> +				  int count, void *buf)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +
> +	insb((unsigned long)st->base_address, buf, count * 2);
> +
> +	return 0;
> +}
> +
> +static const struct ad7606_bus_ops ad7606_par8_bops = {
> +	.read_block = ad7606_par8_read_block,
> +};
> +
> +static int ad7606_par_probe(struct platform_device *pdev)
> +{
> +	const struct platform_device_id *id = platform_get_device_id(pdev);
> +	struct resource *res;
> +	void __iomem *addr;
> +	resource_size_t remap_size;
> +	int irq;
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0) {
> +		dev_err(&pdev->dev, "no irq: %d\n", irq);
> +		return irq;
> +	}
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	addr = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(addr))
> +		return PTR_ERR(addr);
> +
> +	remap_size = resource_size(res);
> +
> +	return ad7606_probe(&pdev->dev, irq, addr,
> +			    id->name, id->driver_data,
> +			    remap_size > 1 ? &ad7606_par16_bops :
> +			    &ad7606_par8_bops);
> +}
> +
> +static const struct platform_device_id ad7606_driver_ids[] = {
> +	{ .name	= "ad7605-4", .driver_data = ID_AD7605_4, },
> +	{ .name	= "ad7606-4", .driver_data = ID_AD7606_4, },
> +	{ .name	= "ad7606-6", .driver_data = ID_AD7606_6, },
> +	{ .name	= "ad7606-8", .driver_data = ID_AD7606_8, },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(platform, ad7606_driver_ids);
> +
> +static const struct of_device_id ad7606_of_match[] = {
> +	{ .compatible = "adi,ad7605-4" },
> +	{ .compatible = "adi,ad7606-4" },
> +	{ .compatible = "adi,ad7606-6" },
> +	{ .compatible = "adi,ad7606-8" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, ad7606_of_match);
> +
> +static struct platform_driver ad7606_driver = {
> +	.probe = ad7606_par_probe,
> +	.id_table = ad7606_driver_ids,
> +	.driver = {
> +		.name = "ad7606",
> +		.pm = AD7606_PM_OPS,
> +		.of_match_table = ad7606_of_match,
> +	},
> +};
> +module_platform_driver(ad7606_driver);
> +
> +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
> +MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/iio/adc/ad7606_spi.c b/drivers/iio/adc/ad7606_spi.c
> new file mode 100644
> index 0000000..6bb1867
> --- /dev/null
> +++ b/drivers/iio/adc/ad7606_spi.c
> @@ -0,0 +1,82 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * AD7606 SPI ADC driver
> + *
> + * Copyright 2011 Analog Devices Inc.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/spi/spi.h>
> +#include <linux/types.h>
> +#include <linux/err.h>
> +
> +#include <linux/iio/iio.h>
> +#include "ad7606.h"
> +
> +#define MAX_SPI_FREQ_HZ		23500000	/* VDRIVE above 4.75 V */
> +
> +static int ad7606_spi_read_block(struct device *dev,
> +				 int count, void *buf)
> +{
> +	struct spi_device *spi = to_spi_device(dev);
> +	int i, ret;
> +	unsigned short *data = buf;
> +	__be16 *bdata = buf;
> +
> +	ret = spi_read(spi, buf, count * 2);
> +	if (ret < 0) {
> +		dev_err(&spi->dev, "SPI read error\n");
> +		return ret;
> +	}
> +
> +	for (i = 0; i < count; i++)
> +		data[i] = be16_to_cpu(bdata[i]);
> +
> +	return 0;
> +}
> +
> +static const struct ad7606_bus_ops ad7606_spi_bops = {
> +	.read_block = ad7606_spi_read_block,
> +};
> +
> +static int ad7606_spi_probe(struct spi_device *spi)
> +{
> +	const struct spi_device_id *id = spi_get_device_id(spi);
> +
> +	return ad7606_probe(&spi->dev, spi->irq, NULL,
> +			    id->name, id->driver_data,
> +			    &ad7606_spi_bops);
> +}
> +
> +static const struct spi_device_id ad7606_id_table[] = {
> +	{ "ad7605-4", ID_AD7605_4 },
> +	{ "ad7606-4", ID_AD7606_4 },
> +	{ "ad7606-6", ID_AD7606_6 },
> +	{ "ad7606-8", ID_AD7606_8 },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(spi, ad7606_id_table);
> +
> +static const struct of_device_id ad7606_of_match[] = {
> +	{ .compatible = "adi,ad7605-4" },
> +	{ .compatible = "adi,ad7606-4" },
> +	{ .compatible = "adi,ad7606-6" },
> +	{ .compatible = "adi,ad7606-8" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, ad7606_of_match);
> +
> +static struct spi_driver ad7606_driver = {
> +	.driver = {
> +		.name = "ad7606",
> +		.of_match_table = ad7606_of_match,
> +		.pm = AD7606_PM_OPS,
> +	},
> +	.probe = ad7606_spi_probe,
> +	.id_table = ad7606_id_table,
> +};
> +module_spi_driver(ad7606_driver);
> +
> +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
> +MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
> +MODULE_LICENSE("GPL v2");
...

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH v4 1/2] staging: iio: ad7606: Move out of staging
  2018-12-10 11:03 [PATCH v4 1/2] staging: iio: ad7606: Move out of staging Stefan Popa
  2018-12-10 21:34 ` Jonathan Cameron
@ 2018-12-11 17:57 ` Jonathan Cameron
  1 sibling, 0 replies; 3+ messages in thread
From: Jonathan Cameron @ 2018-12-11 17:57 UTC (permalink / raw)
  To: Stefan Popa
  Cc: Michael.Hennerich, knaack.h, lars, pmeerw, gregkh, linux-kernel,
	linux-iio, devel

On Mon, 10 Dec 2018 13:03:33 +0200
Stefan Popa <stefan.popa@analog.com> wrote:

> Move ad7606 ADC driver out of staging and into the mainline.
> 
> Signed-off-by: Stefan Popa <stefan.popa@analog.com>

Hi Stefan, I've been a bit silly here and only been looking
at the 'new code' and assuming this was a straight copy.

Please could you split the patch up to do the changes in place
like a normal cleanup series and only move it in a final
patch at the end.

Sorry I didn't mention this before, but it's much easier to
verify the changes that way.  The code is fine, but we need
the baby steps towards an identical file in staging that
we then move out.

I only noticed in the end (despite your big change log :(
because it doesn't actually apply cleanly so I was wondering
what has changed.

Thanks,

Jonathan.

> ---
> Changes in v2:
> 	- Simplified the Kconfig menu.
> 	- Added SPDX-License-Identifier.
> 	- Ordered the includes alphabetically.
> 	- Used a threaded interrupt.
> 	- Replaced ad7606_poll_bh_to_ring() with ad7606_trigger_handler().
> 	- Used a trigger. 
> 	- Replaced wait_event_interruptible() with wait_for_completion_timeout().
> 	- Replaced wake_up_interruptible() with complete().
> 	- Used devm_iio_triggered_buffer_setup().
> 	- Added buffer_ops.
> 	- Used single line comments where needed.
> 	- Removed the gap between docs and struct.
> 	- Added ad7606_of_match[].
> Changes in v3:
> 	- Added a comment which offers more information of the way the interrupt
> 	  is triggered.
> 	- Fixed the way a new conversion is triggered.
> 	- endianness = IIO_CPU
> 	- Removed unnecessary mutex locks.
> 	- Removed the buffer_postdisable ops and replaced it with buffer_predisable.
> 	- Added a devm_add_action_or_reset() which deals with regulator_disable().
> 	- Misc style fixes.
> Changes in v4:
> 	- Removed unused fields from the ad7606_state struct.
> 	- Used the find_closest() macro when searching for the available scale
> 	and the oversampling ratios.
> 
>  MAINTAINERS                          |   7 +
>  drivers/iio/adc/Kconfig              |  28 ++
>  drivers/iio/adc/Makefile             |   3 +
>  drivers/iio/adc/ad7606.c             | 588 +++++++++++++++++++++++++++++++++++
>  drivers/iio/adc/ad7606.h             |  99 ++++++
>  drivers/iio/adc/ad7606_par.c         | 105 +++++++
>  drivers/iio/adc/ad7606_spi.c         |  82 +++++
>  drivers/staging/iio/adc/Kconfig      |  34 --
>  drivers/staging/iio/adc/Makefile     |   3 -
>  drivers/staging/iio/adc/ad7606.c     | 565 ---------------------------------
>  drivers/staging/iio/adc/ad7606.h     | 106 -------
>  drivers/staging/iio/adc/ad7606_par.c | 113 -------
>  drivers/staging/iio/adc/ad7606_spi.c |  79 -----
>  13 files changed, 912 insertions(+), 900 deletions(-)
>  create mode 100644 drivers/iio/adc/ad7606.c
>  create mode 100644 drivers/iio/adc/ad7606.h
>  create mode 100644 drivers/iio/adc/ad7606_par.c
>  create mode 100644 drivers/iio/adc/ad7606_spi.c
>  delete mode 100644 drivers/staging/iio/adc/ad7606.c
>  delete mode 100644 drivers/staging/iio/adc/ad7606.h
>  delete mode 100644 drivers/staging/iio/adc/ad7606_par.c
>  delete mode 100644 drivers/staging/iio/adc/ad7606_spi.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f642044..843545d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -839,6 +839,13 @@ S:	Supported
>  F:	drivers/iio/dac/ad5758.c
>  F:	Documentation/devicetree/bindings/iio/dac/ad5758.txt
>  
> +ANALOG DEVICES INC AD7606 DRIVER
> +M:	Stefan Popa <stefan.popa@analog.com>
> +L:	linux-iio@vger.kernel.org
> +W:	http://ez.analog.com/community/linux-device-drivers
> +S:	Supported
> +F:	drivers/iio/adc/ad7606.c
> +
>  ANALOG DEVICES INC AD9389B DRIVER
>  M:	Hans Verkuil <hans.verkuil@cisco.com>
>  L:	linux-media@vger.kernel.org
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index a52fea8..c3f61c9 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -58,6 +58,34 @@ config AD7476
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called ad7476.
>  
> +config AD7606
> +	tristate
> +	depends on GPIOLIB || COMPILE_TEST
> +	depends on HAS_IOMEM
> +	select IIO_BUFFER
> +	select IIO_TRIGGERED_BUFFER
> +
> +config AD7606_IFACE_PARALLEL
> +	tristate "Analog Devices AD7606 ADC driver with parallel interface support"
> +	select AD7606
> +	help
> +	  Say yes here to build parallel interface support for Analog Devices:
> +	  ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called ad7606_parallel.
> +
> +config AD7606_IFACE_SPI
> +	tristate "Analog Devices AD7606 ADC driver with spi interface support"
> +	depends on SPI
> +	select AD7606
> +	help
> +	  Say yes here to build spi interface support for Analog Devices:
> +	  ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called ad7606_spi.
> +
>  config AD7766
>  	tristate "Analog Devices AD7766/AD7767 ADC driver"
>  	depends on SPI_MASTER
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index a6e6a0b..b734f4f 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -8,6 +8,9 @@ obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
>  obj-$(CONFIG_AD7266) += ad7266.o
>  obj-$(CONFIG_AD7291) += ad7291.o
>  obj-$(CONFIG_AD7298) += ad7298.o
> +obj-$(CONFIG_AD7606_IFACE_PARALLEL) += ad7606_par.o
> +obj-$(CONFIG_AD7606_IFACE_SPI) += ad7606_spi.o
> +obj-$(CONFIG_AD7606) += ad7606.o
>  obj-$(CONFIG_AD7923) += ad7923.o
>  obj-$(CONFIG_AD7476) += ad7476.o
>  obj-$(CONFIG_AD7766) += ad7766.o
> diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
> new file mode 100644
> index 0000000..fa3c8e0
> --- /dev/null
> +++ b/drivers/iio/adc/ad7606.c
> @@ -0,0 +1,588 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * AD7606 SPI ADC driver
> + *
> + * Copyright 2011 Analog Devices Inc.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/sched.h>
> +#include <linux/slab.h>
> +#include <linux/sysfs.h>
> +#include <linux/util_macros.h>
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/iio/trigger.h>
> +#include <linux/iio/triggered_buffer.h>
> +#include <linux/iio/trigger_consumer.h>
> +
> +#include "ad7606.h"
> +
> +/*
> + * Scales are computed as 5000/32768 and 10000/32768 respectively,
> + * so that when applied to the raw values they provide mV values
> + */
> +static const unsigned int scale_avail[2] = {
> +	152588, 305176
> +};
> +
> +static const unsigned int ad7606_oversampling_avail[7] = {
> +	1, 2, 4, 8, 16, 32, 64,
> +};
> +
> +static int ad7606_reset(struct ad7606_state *st)
> +{
> +	if (st->gpio_reset) {
> +		gpiod_set_value(st->gpio_reset, 1);
> +		ndelay(100); /* t_reset >= 100ns */
> +		gpiod_set_value(st->gpio_reset, 0);
> +		return 0;
> +	}
> +
> +	return -ENODEV;
> +}
> +
> +static int ad7606_read_samples(struct ad7606_state *st)
> +{
> +	unsigned int num = st->chip_info->num_channels;
> +	u16 *data = st->data;
> +	int ret;
> +
> +	/*
> +	 * The frstdata signal is set to high while and after reading the sample
> +	 * of the first channel and low for all other channels. This can be used
> +	 * to check that the incoming data is correctly aligned. During normal
> +	 * operation the data should never become unaligned, but some glitch or
> +	 * electrostatic discharge might cause an extra read or clock cycle.
> +	 * Monitoring the frstdata signal allows to recover from such failure
> +	 * situations.
> +	 */
> +
> +	if (st->gpio_frstdata) {
> +		ret = st->bops->read_block(st->dev, 1, data);
> +		if (ret)
> +			return ret;
> +
> +		if (!gpiod_get_value(st->gpio_frstdata)) {
> +			ad7606_reset(st);
> +			return -EIO;
> +		}
> +
> +		data++;
> +		num--;
> +	}
> +
> +	return st->bops->read_block(st->dev, num, data);
> +}
> +
> +static irqreturn_t ad7606_trigger_handler(int irq, void *p)
> +{
> +	struct iio_poll_func *pf = p;
> +	struct iio_dev *indio_dev = pf->indio_dev;
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +	int ret;
> +
> +	mutex_lock(&st->lock);
> +
> +	ret = ad7606_read_samples(st);
> +	if (ret == 0)
> +		iio_push_to_buffers_with_timestamp(indio_dev, st->data,
> +						   iio_get_time_ns(indio_dev));
> +
> +	iio_trigger_notify_done(indio_dev->trig);
> +	/* The rising edge of the CONVST signal starts a new conversion. */
> +	gpiod_set_value(st->gpio_convst, 1);
> +
> +	mutex_unlock(&st->lock);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int ad7606_scan_direct(struct iio_dev *indio_dev, unsigned int ch)
> +{
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +	int ret;
> +
> +	gpiod_set_value(st->gpio_convst, 1);
> +	ret = wait_for_completion_timeout(&st->completion,
> +					  msecs_to_jiffies(1000));
> +	if (!ret) {
> +		ret = -ETIMEDOUT;
> +		goto error_ret;
> +	}
> +
> +	ret = ad7606_read_samples(st);
> +	if (ret == 0)
> +		ret = st->data[ch];
> +
> +error_ret:
> +	gpiod_set_value(st->gpio_convst, 0);
> +
> +	return ret;
> +}
> +
> +static int ad7606_read_raw(struct iio_dev *indio_dev,
> +			   struct iio_chan_spec const *chan,
> +			   int *val,
> +			   int *val2,
> +			   long m)
> +{
> +	int ret;
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +
> +	switch (m) {
> +	case IIO_CHAN_INFO_RAW:
> +		ret = iio_device_claim_direct_mode(indio_dev);
> +		if (ret)
> +			return ret;
> +
> +		ret = ad7606_scan_direct(indio_dev, chan->address);
> +		iio_device_release_direct_mode(indio_dev);
> +
> +		if (ret < 0)
> +			return ret;
> +		*val = (short)ret;
> +		return IIO_VAL_INT;
> +	case IIO_CHAN_INFO_SCALE:
> +		*val = 0;
> +		*val2 = scale_avail[st->range];
> +		return IIO_VAL_INT_PLUS_MICRO;
> +	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> +		*val = st->oversampling;
> +		return IIO_VAL_INT;
> +	}
> +	return -EINVAL;
> +}
> +
> +static ssize_t in_voltage_scale_available_show(struct device *dev,
> +					       struct device_attribute *attr,
> +					       char *buf)
> +{
> +	int i, len = 0;
> +
> +	for (i = 0; i < ARRAY_SIZE(scale_avail); i++)
> +		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
> +				 scale_avail[i]);
> +
> +	buf[len - 1] = '\n';
> +
> +	return len;
> +}
> +
> +static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0);
> +
> +static int ad7606_write_raw(struct iio_dev *indio_dev,
> +			    struct iio_chan_spec const *chan,
> +			    int val,
> +			    int val2,
> +			    long mask)
> +{
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +	int values[3], i;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_SCALE:
> +		mutex_lock(&st->lock);
> +		i = find_closest(val2, scale_avail, ARRAY_SIZE(scale_avail));
> +		gpiod_set_value(st->gpio_range, i);
> +		st->range = i;
> +		mutex_unlock(&st->lock);
> +
> +		return 0;
> +	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> +		if (val2)
> +			return -EINVAL;
> +		i = find_closest(val, ad7606_oversampling_avail,
> +				 ARRAY_SIZE(ad7606_oversampling_avail));
> +
> +		values[0] = (i >> 0) & 1;
> +		values[1] = (i >> 1) & 1;
> +		values[2] = (i >> 2) & 1;
> +
> +		mutex_lock(&st->lock);
> +		gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc,
> +				      values);
> +		st->oversampling = ad7606_oversampling_avail[i];
> +		mutex_unlock(&st->lock);
> +
> +		return 0;
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static IIO_CONST_ATTR(oversampling_ratio_available, "1 2 4 8 16 32 64");
> +
> +static struct attribute *ad7606_attributes_os_and_range[] = {
> +	&iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
> +	&iio_const_attr_oversampling_ratio_available.dev_attr.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group ad7606_attribute_group_os_and_range = {
> +	.attrs = ad7606_attributes_os_and_range,
> +};
> +
> +static struct attribute *ad7606_attributes_os[] = {
> +	&iio_const_attr_oversampling_ratio_available.dev_attr.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group ad7606_attribute_group_os = {
> +	.attrs = ad7606_attributes_os,
> +};
> +
> +static struct attribute *ad7606_attributes_range[] = {
> +	&iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group ad7606_attribute_group_range = {
> +	.attrs = ad7606_attributes_range,
> +};
> +
> +#define AD760X_CHANNEL(num, mask) {				\
> +		.type = IIO_VOLTAGE,				\
> +		.indexed = 1,					\
> +		.channel = num,					\
> +		.address = num,					\
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
> +		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\
> +		.info_mask_shared_by_all = mask,		\
> +		.scan_index = num,				\
> +		.scan_type = {					\
> +			.sign = 's',				\
> +			.realbits = 16,				\
> +			.storagebits = 16,			\
> +			.endianness = IIO_CPU,			\
> +		},						\
> +}
> +
> +#define AD7605_CHANNEL(num)	\
> +	AD760X_CHANNEL(num, 0)
> +
> +#define AD7606_CHANNEL(num)	\
> +	AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
> +
> +static const struct iio_chan_spec ad7605_channels[] = {
> +	IIO_CHAN_SOFT_TIMESTAMP(4),
> +	AD7605_CHANNEL(0),
> +	AD7605_CHANNEL(1),
> +	AD7605_CHANNEL(2),
> +	AD7605_CHANNEL(3),
> +};
> +
> +static const struct iio_chan_spec ad7606_channels[] = {
> +	IIO_CHAN_SOFT_TIMESTAMP(8),
> +	AD7606_CHANNEL(0),
> +	AD7606_CHANNEL(1),
> +	AD7606_CHANNEL(2),
> +	AD7606_CHANNEL(3),
> +	AD7606_CHANNEL(4),
> +	AD7606_CHANNEL(5),
> +	AD7606_CHANNEL(6),
> +	AD7606_CHANNEL(7),
> +};
> +
> +static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
> +	/* More devices added in future */
> +	[ID_AD7605_4] = {
> +		.channels = ad7605_channels,
> +		.num_channels = 5,
> +	},
> +	[ID_AD7606_8] = {
> +		.channels = ad7606_channels,
> +		.num_channels = 9,
> +		.has_oversampling = true,
> +	},
> +	[ID_AD7606_6] = {
> +		.channels = ad7606_channels,
> +		.num_channels = 7,
> +		.has_oversampling = true,
> +	},
> +	[ID_AD7606_4] = {
> +		.channels = ad7606_channels,
> +		.num_channels = 5,
> +		.has_oversampling = true,
> +	},
> +};
> +
> +static int ad7606_request_gpios(struct ad7606_state *st)
> +{
> +	struct device *dev = st->dev;
> +
> +	st->gpio_convst = devm_gpiod_get(dev, "adi,conversion-start",
> +					 GPIOD_OUT_LOW);
> +	if (IS_ERR(st->gpio_convst))
> +		return PTR_ERR(st->gpio_convst);
> +
> +	st->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> +	if (IS_ERR(st->gpio_reset))
> +		return PTR_ERR(st->gpio_reset);
> +
> +	st->gpio_range = devm_gpiod_get_optional(dev, "adi,range",
> +						 GPIOD_OUT_LOW);
> +	if (IS_ERR(st->gpio_range))
> +		return PTR_ERR(st->gpio_range);
> +
> +	st->gpio_standby = devm_gpiod_get_optional(dev, "standby",
> +						   GPIOD_OUT_HIGH);
> +	if (IS_ERR(st->gpio_standby))
> +		return PTR_ERR(st->gpio_standby);
> +
> +	st->gpio_frstdata = devm_gpiod_get_optional(dev, "adi,first-data",
> +						    GPIOD_IN);
> +	if (IS_ERR(st->gpio_frstdata))
> +		return PTR_ERR(st->gpio_frstdata);
> +
> +	if (!st->chip_info->has_oversampling)
> +		return 0;
> +
> +	st->gpio_os = devm_gpiod_get_array_optional(dev,
> +						    "adi,oversampling-ratio",
> +						    GPIOD_OUT_LOW);
> +	return PTR_ERR_OR_ZERO(st->gpio_os);
> +}
> +
> +/*
> + * The BUSY signal indicates when conversions are in progress, so when a rising
> + * edge of CONVST is applied, BUSY goes logic high and transitions low at the
> + * end of the entire conversion process. The falling edge of the BUSY signal
> + * triggers this interrupt.
> + */
> +static irqreturn_t ad7606_interrupt(int irq, void *dev_id)
> +{
> +	struct iio_dev *indio_dev = dev_id;
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +
> +	if (iio_buffer_enabled(indio_dev)) {
> +		gpiod_set_value(st->gpio_convst, 0);
> +		iio_trigger_poll_chained(st->trig);
> +	} else {
> +		complete(&st->completion);
> +	}
> +
> +	return IRQ_HANDLED;
> +};
> +
> +static int ad7606_validate_trigger(struct iio_dev *indio_dev,
> +				   struct iio_trigger *trig)
> +{
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +
> +	if (st->trig != trig)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
> +static int ad7606_buffer_postenable(struct iio_dev *indio_dev)
> +{
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +
> +	iio_triggered_buffer_postenable(indio_dev);
> +	gpiod_set_value(st->gpio_convst, 1);
> +
> +	return 0;
> +}
> +
> +static int ad7606_buffer_predisable(struct iio_dev *indio_dev)
> +{
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +	int ret;
> +
> +	reinit_completion(&st->completion);
> +	gpiod_set_value(st->gpio_convst, 1);
> +	ret = wait_for_completion_timeout(&st->completion,
> +					  msecs_to_jiffies(1000));
> +	gpiod_set_value(st->gpio_convst, 0);
> +
> +	return iio_triggered_buffer_predisable(indio_dev);
> +}
> +
> +static const struct iio_buffer_setup_ops ad7606_buffer_ops = {
> +	.postenable = &ad7606_buffer_postenable,
> +	.predisable = &ad7606_buffer_predisable,
> +};
> +
> +static const struct iio_info ad7606_info_no_os_or_range = {
> +	.read_raw = &ad7606_read_raw,
> +	.validate_trigger = &ad7606_validate_trigger,
> +};
> +
> +static const struct iio_info ad7606_info_os_and_range = {
> +	.read_raw = &ad7606_read_raw,
> +	.write_raw = &ad7606_write_raw,
> +	.attrs = &ad7606_attribute_group_os_and_range,
> +	.validate_trigger = &ad7606_validate_trigger,
> +};
> +
> +static const struct iio_info ad7606_info_os = {
> +	.read_raw = &ad7606_read_raw,
> +	.write_raw = &ad7606_write_raw,
> +	.attrs = &ad7606_attribute_group_os,
> +	.validate_trigger = &ad7606_validate_trigger,
> +};
> +
> +static const struct iio_info ad7606_info_range = {
> +	.read_raw = &ad7606_read_raw,
> +	.write_raw = &ad7606_write_raw,
> +	.attrs = &ad7606_attribute_group_range,
> +	.validate_trigger = &ad7606_validate_trigger,
> +};
> +
> +static const struct iio_trigger_ops ad7606_trigger_ops = {
> +	.validate_device = iio_trigger_validate_own_device,
> +};
> +
> +static void ad7606_regulator_disable(void *data)
> +{
> +	struct ad7606_state *st = data;
> +
> +	regulator_disable(st->reg);
> +}
> +
> +int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> +		 const char *name, unsigned int id,
> +		 const struct ad7606_bus_ops *bops)
> +{
> +	struct ad7606_state *st;
> +	int ret;
> +	struct iio_dev *indio_dev;
> +
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	st = iio_priv(indio_dev);
> +	dev_set_drvdata(dev, indio_dev);
> +
> +	st->dev = dev;
> +	mutex_init(&st->lock);
> +	st->bops = bops;
> +	st->base_address = base_address;
> +	st->oversampling = 1;
> +
> +	st->reg = devm_regulator_get(dev, "avcc");
> +	if (IS_ERR(st->reg))
> +		return PTR_ERR(st->reg);
> +
> +	ret = regulator_enable(st->reg);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable specified AVcc supply\n");
> +		return ret;
> +	}
> +
> +	ret = devm_add_action_or_reset(dev, ad7606_regulator_disable, st);
> +	if (ret)
> +		return ret;
> +
> +	st->chip_info = &ad7606_chip_info_tbl[id];
> +
> +	ret = ad7606_request_gpios(st);
> +	if (ret)
> +		return ret;
> +
> +	indio_dev->dev.parent = dev;
> +	if (st->gpio_os) {
> +		if (st->gpio_range)
> +			indio_dev->info = &ad7606_info_os_and_range;
> +		else
> +			indio_dev->info = &ad7606_info_os;
> +	} else {
> +		if (st->gpio_range)
> +			indio_dev->info = &ad7606_info_range;
> +		else
> +			indio_dev->info = &ad7606_info_no_os_or_range;
> +	}
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->name = name;
> +	indio_dev->channels = st->chip_info->channels;
> +	indio_dev->num_channels = st->chip_info->num_channels;
> +
> +	ret = ad7606_reset(st);
> +	if (ret)
> +		dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n");
> +
> +	st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
> +					  indio_dev->name, indio_dev->id);
> +	if (st->trig == NULL)
> +		return -ENOMEM;
> +
> +	st->trig->ops = &ad7606_trigger_ops;
> +	st->trig->dev.parent = dev;
> +	iio_trigger_set_drvdata(st->trig, indio_dev);
> +	ret = devm_iio_trigger_register(dev, st->trig);
> +	if (ret)
> +		return ret;
> +
> +	indio_dev->trig = iio_trigger_get(st->trig);
> +
> +	init_completion(&st->completion);
> +
> +	ret = devm_request_threaded_irq(dev, irq,
> +					NULL,
> +					&ad7606_interrupt,
> +					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> +					name, indio_dev);
> +	if (ret)
> +		return ret;
> +
> +	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
> +					      &iio_pollfunc_store_time,
> +					      &ad7606_trigger_handler,
> +					      &ad7606_buffer_ops);
> +	if (ret)
> +		return ret;
> +
> +	return devm_iio_device_register(dev, indio_dev);
> +
> +}
> +EXPORT_SYMBOL_GPL(ad7606_probe);
> +
> +#ifdef CONFIG_PM_SLEEP
> +
> +static int ad7606_suspend(struct device *dev)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +
> +	if (st->gpio_standby) {
> +		gpiod_set_value(st->gpio_range, 1);
> +		gpiod_set_value(st->gpio_standby, 0);
> +	}
> +
> +	return 0;
> +}
> +
> +static int ad7606_resume(struct device *dev)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +
> +	if (st->gpio_standby) {
> +		gpiod_set_value(st->gpio_range, st->range);
> +		gpiod_set_value(st->gpio_standby, 1);
> +		ad7606_reset(st);
> +	}
> +
> +	return 0;
> +}
> +
> +SIMPLE_DEV_PM_OPS(ad7606_pm_ops, ad7606_suspend, ad7606_resume);
> +EXPORT_SYMBOL_GPL(ad7606_pm_ops);
> +
> +#endif
> +
> +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
> +MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h
> new file mode 100644
> index 0000000..40433af
> --- /dev/null
> +++ b/drivers/iio/adc/ad7606.h
> @@ -0,0 +1,99 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * AD7606 ADC driver
> + *
> + * Copyright 2011 Analog Devices Inc.
> + */
> +
> +#ifndef IIO_ADC_AD7606_H_
> +#define IIO_ADC_AD7606_H_
> +
> +/**
> + * struct ad7606_chip_info - chip specific information
> + * @channels:		channel specification
> + * @num_channels:	number of channels
> + * @has_oversampling:   whether the device has oversampling support
> + */
> +struct ad7606_chip_info {
> +	const struct iio_chan_spec	*channels;
> +	unsigned int			num_channels;
> +	bool				has_oversampling;
> +};
> +
> +/**
> + * struct ad7606_state - driver instance specific data
> + * @dev		pointer to kernel device
> + * @chip_info		entry in the table of chips that describes this device
> + * @reg		regulator info for the the power supply of the device
> + * @bops		bus operations (SPI or parallel)
> + * @range		voltage range selection, selects which scale to apply
> + * @oversampling	oversampling selection
> + * @base_address	address from where to read data in parallel operation
> + * @lock		protect sensor state from concurrent accesses to GPIOs
> + * @gpio_convst	GPIO descriptor for conversion start signal (CONVST)
> + * @gpio_reset		GPIO descriptor for device hard-reset
> + * @gpio_range		GPIO descriptor for range selection
> + * @gpio_standby	GPIO descriptor for stand-by signal (STBY),
> + *			controls power-down mode of device
> + * @gpio_frstdata	GPIO descriptor for reading from device when data
> + *			is being read on the first channel
> + * @gpio_os		GPIO descriptors to control oversampling on the device
> + * @complete		completion to indicate end of conversion
> + * @trig		The IIO trigger associated with the device.
> + * @data		buffer for reading data from the device
> + */
> +struct ad7606_state {
> +	struct device			*dev;
> +	const struct ad7606_chip_info	*chip_info;
> +	struct regulator		*reg;
> +	const struct ad7606_bus_ops	*bops;
> +	unsigned int			range;
> +	unsigned int			oversampling;
> +	void __iomem			*base_address;
> +
> +	struct mutex			lock; /* protect sensor state */
> +	struct gpio_desc		*gpio_convst;
> +	struct gpio_desc		*gpio_reset;
> +	struct gpio_desc		*gpio_range;
> +	struct gpio_desc		*gpio_standby;
> +	struct gpio_desc		*gpio_frstdata;
> +	struct gpio_descs		*gpio_os;
> +	struct iio_trigger		*trig;
> +	struct completion		completion;
> +
> +	/*
> +	 * DMA (thus cache coherency maintenance) requires the
> +	 * transfer buffers to live in their own cache lines.
> +	 * 8 * 16-bit samples + 64-bit timestamp
> +	 */
> +	unsigned short			data[12] ____cacheline_aligned;
> +};
> +
> +/**
> + * struct ad7606_bus_ops - driver bus operations
> + * @read_block		function pointer for reading blocks of data
> + */
> +struct ad7606_bus_ops {
> +	/* more methods added in future? */
> +	int (*read_block)(struct device *dev, int num, void *data);
> +};
> +
> +int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> +		 const char *name, unsigned int id,
> +		 const struct ad7606_bus_ops *bops);
> +
> +enum ad7606_supported_device_ids {
> +	ID_AD7605_4,
> +	ID_AD7606_8,
> +	ID_AD7606_6,
> +	ID_AD7606_4
> +};
> +
> +#ifdef CONFIG_PM_SLEEP
> +extern const struct dev_pm_ops ad7606_pm_ops;
> +#define AD7606_PM_OPS (&ad7606_pm_ops)
> +#else
> +#define AD7606_PM_OPS NULL
> +#endif
> +
> +#endif /* IIO_ADC_AD7606_H_ */
> diff --git a/drivers/iio/adc/ad7606_par.c b/drivers/iio/adc/ad7606_par.c
> new file mode 100644
> index 0000000..32c7069
> --- /dev/null
> +++ b/drivers/iio/adc/ad7606_par.c
> @@ -0,0 +1,105 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * AD7606 Parallel Interface ADC driver
> + *
> + * Copyright 2011 Analog Devices Inc.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/types.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +
> +#include <linux/iio/iio.h>
> +#include "ad7606.h"
> +
> +static int ad7606_par16_read_block(struct device *dev,
> +				   int count, void *buf)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +
> +	insw((unsigned long)st->base_address, buf, count);
> +
> +	return 0;
> +}
> +
> +static const struct ad7606_bus_ops ad7606_par16_bops = {
> +	.read_block = ad7606_par16_read_block,
> +};
> +
> +static int ad7606_par8_read_block(struct device *dev,
> +				  int count, void *buf)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +
> +	insb((unsigned long)st->base_address, buf, count * 2);
> +
> +	return 0;
> +}
> +
> +static const struct ad7606_bus_ops ad7606_par8_bops = {
> +	.read_block = ad7606_par8_read_block,
> +};
> +
> +static int ad7606_par_probe(struct platform_device *pdev)
> +{
> +	const struct platform_device_id *id = platform_get_device_id(pdev);
> +	struct resource *res;
> +	void __iomem *addr;
> +	resource_size_t remap_size;
> +	int irq;
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0) {
> +		dev_err(&pdev->dev, "no irq: %d\n", irq);
> +		return irq;
> +	}
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	addr = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(addr))
> +		return PTR_ERR(addr);
> +
> +	remap_size = resource_size(res);
> +
> +	return ad7606_probe(&pdev->dev, irq, addr,
> +			    id->name, id->driver_data,
> +			    remap_size > 1 ? &ad7606_par16_bops :
> +			    &ad7606_par8_bops);
> +}
> +
> +static const struct platform_device_id ad7606_driver_ids[] = {
> +	{ .name	= "ad7605-4", .driver_data = ID_AD7605_4, },
> +	{ .name	= "ad7606-4", .driver_data = ID_AD7606_4, },
> +	{ .name	= "ad7606-6", .driver_data = ID_AD7606_6, },
> +	{ .name	= "ad7606-8", .driver_data = ID_AD7606_8, },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(platform, ad7606_driver_ids);
> +
> +static const struct of_device_id ad7606_of_match[] = {
> +	{ .compatible = "adi,ad7605-4" },
> +	{ .compatible = "adi,ad7606-4" },
> +	{ .compatible = "adi,ad7606-6" },
> +	{ .compatible = "adi,ad7606-8" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, ad7606_of_match);
> +
> +static struct platform_driver ad7606_driver = {
> +	.probe = ad7606_par_probe,
> +	.id_table = ad7606_driver_ids,
> +	.driver = {
> +		.name = "ad7606",
> +		.pm = AD7606_PM_OPS,
> +		.of_match_table = ad7606_of_match,
> +	},
> +};
> +module_platform_driver(ad7606_driver);
> +
> +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
> +MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/iio/adc/ad7606_spi.c b/drivers/iio/adc/ad7606_spi.c
> new file mode 100644
> index 0000000..6bb1867
> --- /dev/null
> +++ b/drivers/iio/adc/ad7606_spi.c
> @@ -0,0 +1,82 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * AD7606 SPI ADC driver
> + *
> + * Copyright 2011 Analog Devices Inc.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/spi/spi.h>
> +#include <linux/types.h>
> +#include <linux/err.h>
> +
> +#include <linux/iio/iio.h>
> +#include "ad7606.h"
> +
> +#define MAX_SPI_FREQ_HZ		23500000	/* VDRIVE above 4.75 V */
> +
> +static int ad7606_spi_read_block(struct device *dev,
> +				 int count, void *buf)
> +{
> +	struct spi_device *spi = to_spi_device(dev);
> +	int i, ret;
> +	unsigned short *data = buf;
> +	__be16 *bdata = buf;
> +
> +	ret = spi_read(spi, buf, count * 2);
> +	if (ret < 0) {
> +		dev_err(&spi->dev, "SPI read error\n");
> +		return ret;
> +	}
> +
> +	for (i = 0; i < count; i++)
> +		data[i] = be16_to_cpu(bdata[i]);
> +
> +	return 0;
> +}
> +
> +static const struct ad7606_bus_ops ad7606_spi_bops = {
> +	.read_block = ad7606_spi_read_block,
> +};
> +
> +static int ad7606_spi_probe(struct spi_device *spi)
> +{
> +	const struct spi_device_id *id = spi_get_device_id(spi);
> +
> +	return ad7606_probe(&spi->dev, spi->irq, NULL,
> +			    id->name, id->driver_data,
> +			    &ad7606_spi_bops);
> +}
> +
> +static const struct spi_device_id ad7606_id_table[] = {
> +	{ "ad7605-4", ID_AD7605_4 },
> +	{ "ad7606-4", ID_AD7606_4 },
> +	{ "ad7606-6", ID_AD7606_6 },
> +	{ "ad7606-8", ID_AD7606_8 },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(spi, ad7606_id_table);
> +
> +static const struct of_device_id ad7606_of_match[] = {
> +	{ .compatible = "adi,ad7605-4" },
> +	{ .compatible = "adi,ad7606-4" },
> +	{ .compatible = "adi,ad7606-6" },
> +	{ .compatible = "adi,ad7606-8" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, ad7606_of_match);
> +
> +static struct spi_driver ad7606_driver = {
> +	.driver = {
> +		.name = "ad7606",
> +		.of_match_table = ad7606_of_match,
> +		.pm = AD7606_PM_OPS,
> +	},
> +	.probe = ad7606_spi_probe,
> +	.id_table = ad7606_id_table,
> +};
> +module_spi_driver(ad7606_driver);
> +
> +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
> +MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
> index 9d3062a..2c05adb 100644
> --- a/drivers/staging/iio/adc/Kconfig
> +++ b/drivers/staging/iio/adc/Kconfig
> @@ -3,40 +3,6 @@
>  #
>  menu "Analog to digital converters"
>  
> -config AD7606
> -	tristate "Analog Devices AD7606 ADC driver"
> -	depends on GPIOLIB || COMPILE_TEST
> -	depends on HAS_IOMEM
> -	select IIO_BUFFER
> -	select IIO_TRIGGERED_BUFFER
> -	help
> -	  Say yes here to build support for Analog Devices:
> -	  ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
> -
> -	  To compile this driver as a module, choose M here: the
> -	  module will be called ad7606.
> -
> -config AD7606_IFACE_PARALLEL
> -	tristate "parallel interface support"
> -	depends on AD7606
> -	help
> -	  Say yes here to include parallel interface support on the AD7606
> -	  ADC driver.
> -
> -	  To compile this driver as a module, choose M here: the
> -	  module will be called ad7606_parallel.
> -
> -config AD7606_IFACE_SPI
> -	tristate "spi interface support"
> -	depends on AD7606
> -	depends on SPI
> -	help
> -	  Say yes here to include parallel interface support on the AD7606
> -	  ADC driver.
> -
> -	  To compile this driver as a module, choose M here: the
> -	  module will be called ad7606_spi.
> -
>  config AD7780
>  	tristate "Analog Devices AD7780 and similar ADCs driver"
>  	depends on SPI
> diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile
> index ebe83c1..57a18e7 100644
> --- a/drivers/staging/iio/adc/Makefile
> +++ b/drivers/staging/iio/adc/Makefile
> @@ -3,9 +3,6 @@
>  # Makefile for industrial I/O ADC drivers
>  #
>  
> -obj-$(CONFIG_AD7606_IFACE_PARALLEL) += ad7606_par.o
> -obj-$(CONFIG_AD7606_IFACE_SPI) += ad7606_spi.o
> -obj-$(CONFIG_AD7606) += ad7606.o
>  
>  obj-$(CONFIG_AD7780) += ad7780.o
>  obj-$(CONFIG_AD7816) += ad7816.o
> diff --git a/drivers/staging/iio/adc/ad7606.c b/drivers/staging/iio/adc/ad7606.c
> deleted file mode 100644
> index 0b728b6..0000000
> --- a/drivers/staging/iio/adc/ad7606.c
> +++ /dev/null
> @@ -1,565 +0,0 @@
> -/*
> - * AD7606 SPI ADC driver
> - *
> - * Copyright 2011 Analog Devices Inc.
> - *
> - * Licensed under the GPL-2.
> - */
> -
> -#include <linux/interrupt.h>
> -#include <linux/device.h>
> -#include <linux/kernel.h>
> -#include <linux/slab.h>
> -#include <linux/sysfs.h>
> -#include <linux/regulator/consumer.h>
> -#include <linux/err.h>
> -#include <linux/gpio/consumer.h>
> -#include <linux/delay.h>
> -#include <linux/sched.h>
> -#include <linux/module.h>
> -
> -#include <linux/iio/iio.h>
> -#include <linux/iio/sysfs.h>
> -#include <linux/iio/buffer.h>
> -#include <linux/iio/trigger_consumer.h>
> -#include <linux/iio/triggered_buffer.h>
> -
> -#include "ad7606.h"
> -
> -/*
> - * Scales are computed as 5000/32768 and 10000/32768 respectively,
> - * so that when applied to the raw values they provide mV values
> - */
> -static const unsigned int scale_avail[2][2] = {
> -	{0, 152588}, {0, 305176}
> -};
> -
> -static int ad7606_reset(struct ad7606_state *st)
> -{
> -	if (st->gpio_reset) {
> -		gpiod_set_value(st->gpio_reset, 1);
> -		ndelay(100); /* t_reset >= 100ns */
> -		gpiod_set_value(st->gpio_reset, 0);
> -		return 0;
> -	}
> -
> -	return -ENODEV;
> -}
> -
> -static int ad7606_read_samples(struct ad7606_state *st)
> -{
> -	unsigned int num = st->chip_info->num_channels;
> -	u16 *data = st->data;
> -	int ret;
> -
> -	/*
> -	 * The frstdata signal is set to high while and after reading the sample
> -	 * of the first channel and low for all other channels. This can be used
> -	 * to check that the incoming data is correctly aligned. During normal
> -	 * operation the data should never become unaligned, but some glitch or
> -	 * electrostatic discharge might cause an extra read or clock cycle.
> -	 * Monitoring the frstdata signal allows to recover from such failure
> -	 * situations.
> -	 */
> -
> -	if (st->gpio_frstdata) {
> -		ret = st->bops->read_block(st->dev, 1, data);
> -		if (ret)
> -			return ret;
> -
> -		if (!gpiod_get_value(st->gpio_frstdata)) {
> -			ad7606_reset(st);
> -			return -EIO;
> -		}
> -
> -		data++;
> -		num--;
> -	}
> -
> -	return st->bops->read_block(st->dev, num, data);
> -}
> -
> -static irqreturn_t ad7606_trigger_handler(int irq, void *p)
> -{
> -	struct iio_poll_func *pf = p;
> -	struct ad7606_state *st = iio_priv(pf->indio_dev);
> -
> -	gpiod_set_value(st->gpio_convst, 1);
> -
> -	return IRQ_HANDLED;
> -}
> -
> -/**
> - * ad7606_poll_bh_to_ring() bh of trigger launched polling to ring buffer
> - * @work_s:	the work struct through which this was scheduled
> - *
> - * Currently there is no option in this driver to disable the saving of
> - * timestamps within the ring.
> - * I think the one copy of this at a time was to avoid problems if the
> - * trigger was set far too high and the reads then locked up the computer.
> - **/
> -static void ad7606_poll_bh_to_ring(struct work_struct *work_s)
> -{
> -	struct ad7606_state *st = container_of(work_s, struct ad7606_state,
> -						poll_work);
> -	struct iio_dev *indio_dev = iio_priv_to_dev(st);
> -	int ret;
> -
> -	ret = ad7606_read_samples(st);
> -	if (ret == 0)
> -		iio_push_to_buffers_with_timestamp(indio_dev, st->data,
> -						   iio_get_time_ns(indio_dev));
> -
> -	gpiod_set_value(st->gpio_convst, 0);
> -	iio_trigger_notify_done(indio_dev->trig);
> -}
> -
> -static int ad7606_scan_direct(struct iio_dev *indio_dev, unsigned int ch)
> -{
> -	struct ad7606_state *st = iio_priv(indio_dev);
> -	int ret;
> -
> -	st->done = false;
> -	gpiod_set_value(st->gpio_convst, 1);
> -
> -	ret = wait_event_interruptible(st->wq_data_avail, st->done);
> -	if (ret)
> -		goto error_ret;
> -
> -	ret = ad7606_read_samples(st);
> -	if (ret == 0)
> -		ret = st->data[ch];
> -
> -error_ret:
> -	gpiod_set_value(st->gpio_convst, 0);
> -
> -	return ret;
> -}
> -
> -static int ad7606_read_raw(struct iio_dev *indio_dev,
> -			   struct iio_chan_spec const *chan,
> -			   int *val,
> -			   int *val2,
> -			   long m)
> -{
> -	int ret;
> -	struct ad7606_state *st = iio_priv(indio_dev);
> -
> -	switch (m) {
> -	case IIO_CHAN_INFO_RAW:
> -		ret = iio_device_claim_direct_mode(indio_dev);
> -		if (ret)
> -			return ret;
> -
> -		ret = ad7606_scan_direct(indio_dev, chan->address);
> -		iio_device_release_direct_mode(indio_dev);
> -
> -		if (ret < 0)
> -			return ret;
> -		*val = (short)ret;
> -		return IIO_VAL_INT;
> -	case IIO_CHAN_INFO_SCALE:
> -		*val = scale_avail[st->range][0];
> -		*val2 = scale_avail[st->range][1];
> -		return IIO_VAL_INT_PLUS_MICRO;
> -	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> -		*val = st->oversampling;
> -		return IIO_VAL_INT;
> -	}
> -	return -EINVAL;
> -}
> -
> -static ssize_t in_voltage_scale_available_show(struct device *dev,
> -					       struct device_attribute *attr,
> -					       char *buf)
> -{
> -	int i, len = 0;
> -
> -	for (i = 0; i < ARRAY_SIZE(scale_avail); i++)
> -		len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%06u ",
> -				 scale_avail[i][0], scale_avail[i][1]);
> -
> -	buf[len - 1] = '\n';
> -
> -	return len;
> -}
> -
> -static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0);
> -
> -static int ad7606_oversampling_get_index(unsigned int val)
> -{
> -	unsigned char supported[] = {1, 2, 4, 8, 16, 32, 64};
> -	int i;
> -
> -	for (i = 0; i < ARRAY_SIZE(supported); i++)
> -		if (val == supported[i])
> -			return i;
> -
> -	return -EINVAL;
> -}
> -
> -static int ad7606_write_raw(struct iio_dev *indio_dev,
> -			    struct iio_chan_spec const *chan,
> -			    int val,
> -			    int val2,
> -			    long mask)
> -{
> -	struct ad7606_state *st = iio_priv(indio_dev);
> -	int values[3];
> -	int ret, i;
> -
> -	switch (mask) {
> -	case IIO_CHAN_INFO_SCALE:
> -		ret = -EINVAL;
> -		mutex_lock(&st->lock);
> -		for (i = 0; i < ARRAY_SIZE(scale_avail); i++)
> -			if (val2 == scale_avail[i][1]) {
> -				gpiod_set_value(st->gpio_range, i);
> -				st->range = i;
> -
> -				ret = 0;
> -				break;
> -			}
> -		mutex_unlock(&st->lock);
> -
> -		return ret;
> -	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> -		if (val2)
> -			return -EINVAL;
> -		ret = ad7606_oversampling_get_index(val);
> -		if (ret < 0)
> -			return ret;
> -
> -		values[0] = (ret >> 0) & 1;
> -		values[1] = (ret >> 1) & 1;
> -		values[2] = (ret >> 2) & 1;
> -
> -		mutex_lock(&st->lock);
> -		gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc,
> -				      values);
> -		st->oversampling = val;
> -		mutex_unlock(&st->lock);
> -
> -		return 0;
> -	default:
> -		return -EINVAL;
> -	}
> -}
> -
> -static IIO_CONST_ATTR(oversampling_ratio_available, "1 2 4 8 16 32 64");
> -
> -static struct attribute *ad7606_attributes_os_and_range[] = {
> -	&iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
> -	&iio_const_attr_oversampling_ratio_available.dev_attr.attr,
> -	NULL,
> -};
> -
> -static const struct attribute_group ad7606_attribute_group_os_and_range = {
> -	.attrs = ad7606_attributes_os_and_range,
> -};
> -
> -static struct attribute *ad7606_attributes_os[] = {
> -	&iio_const_attr_oversampling_ratio_available.dev_attr.attr,
> -	NULL,
> -};
> -
> -static const struct attribute_group ad7606_attribute_group_os = {
> -	.attrs = ad7606_attributes_os,
> -};
> -
> -static struct attribute *ad7606_attributes_range[] = {
> -	&iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
> -	NULL,
> -};
> -
> -static const struct attribute_group ad7606_attribute_group_range = {
> -	.attrs = ad7606_attributes_range,
> -};
> -
> -#define AD760X_CHANNEL(num, mask)				\
> -	{							\
> -		.type = IIO_VOLTAGE,				\
> -		.indexed = 1,					\
> -		.channel = num,					\
> -		.address = num,					\
> -		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
> -		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\
> -		.info_mask_shared_by_all = mask,		\
> -		.scan_index = num,				\
> -		.scan_type = {					\
> -			.sign = 's',				\
> -			.realbits = 16,				\
> -			.storagebits = 16,			\
> -			.endianness = IIO_CPU,			\
> -		},						\
> -	}
> -
> -#define AD7605_CHANNEL(num)	\
> -	AD760X_CHANNEL(num, 0)
> -
> -#define AD7606_CHANNEL(num)	\
> -	AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
> -
> -static const struct iio_chan_spec ad7605_channels[] = {
> -	IIO_CHAN_SOFT_TIMESTAMP(4),
> -	AD7605_CHANNEL(0),
> -	AD7605_CHANNEL(1),
> -	AD7605_CHANNEL(2),
> -	AD7605_CHANNEL(3),
> -};
> -
> -static const struct iio_chan_spec ad7606_channels[] = {
> -	IIO_CHAN_SOFT_TIMESTAMP(8),
> -	AD7606_CHANNEL(0),
> -	AD7606_CHANNEL(1),
> -	AD7606_CHANNEL(2),
> -	AD7606_CHANNEL(3),
> -	AD7606_CHANNEL(4),
> -	AD7606_CHANNEL(5),
> -	AD7606_CHANNEL(6),
> -	AD7606_CHANNEL(7),
> -};
> -
> -static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
> -	/*
> -	 * More devices added in future
> -	 */
> -	[ID_AD7605_4] = {
> -		.channels = ad7605_channels,
> -		.num_channels = 5,
> -	},
> -	[ID_AD7606_8] = {
> -		.channels = ad7606_channels,
> -		.num_channels = 9,
> -		.has_oversampling = true,
> -	},
> -	[ID_AD7606_6] = {
> -		.channels = ad7606_channels,
> -		.num_channels = 7,
> -		.has_oversampling = true,
> -	},
> -	[ID_AD7606_4] = {
> -		.channels = ad7606_channels,
> -		.num_channels = 5,
> -		.has_oversampling = true,
> -	},
> -};
> -
> -static int ad7606_request_gpios(struct ad7606_state *st)
> -{
> -	struct device *dev = st->dev;
> -
> -	st->gpio_convst = devm_gpiod_get(dev, "conversion-start",
> -					 GPIOD_OUT_LOW);
> -	if (IS_ERR(st->gpio_convst))
> -		return PTR_ERR(st->gpio_convst);
> -
> -	st->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> -	if (IS_ERR(st->gpio_reset))
> -		return PTR_ERR(st->gpio_reset);
> -
> -	st->gpio_range = devm_gpiod_get_optional(dev, "range", GPIOD_OUT_LOW);
> -	if (IS_ERR(st->gpio_range))
> -		return PTR_ERR(st->gpio_range);
> -
> -	st->gpio_standby = devm_gpiod_get_optional(dev, "standby",
> -						   GPIOD_OUT_HIGH);
> -	if (IS_ERR(st->gpio_standby))
> -		return PTR_ERR(st->gpio_standby);
> -
> -	st->gpio_frstdata = devm_gpiod_get_optional(dev, "first-data",
> -						    GPIOD_IN);
> -	if (IS_ERR(st->gpio_frstdata))
> -		return PTR_ERR(st->gpio_frstdata);
> -
> -	if (!st->chip_info->has_oversampling)
> -		return 0;
> -
> -	st->gpio_os = devm_gpiod_get_array_optional(dev, "oversampling-ratio",
> -			GPIOD_OUT_LOW);
> -	return PTR_ERR_OR_ZERO(st->gpio_os);
> -}
> -
> -/**
> - *  Interrupt handler
> - */
> -static irqreturn_t ad7606_interrupt(int irq, void *dev_id)
> -{
> -	struct iio_dev *indio_dev = dev_id;
> -	struct ad7606_state *st = iio_priv(indio_dev);
> -
> -	if (iio_buffer_enabled(indio_dev)) {
> -		schedule_work(&st->poll_work);
> -	} else {
> -		st->done = true;
> -		wake_up_interruptible(&st->wq_data_avail);
> -	}
> -
> -	return IRQ_HANDLED;
> -};
> -
> -static const struct iio_info ad7606_info_no_os_or_range = {
> -	.read_raw = &ad7606_read_raw,
> -};
> -
> -static const struct iio_info ad7606_info_os_and_range = {
> -	.read_raw = &ad7606_read_raw,
> -	.write_raw = &ad7606_write_raw,
> -	.attrs = &ad7606_attribute_group_os_and_range,
> -};
> -
> -static const struct iio_info ad7606_info_os = {
> -	.read_raw = &ad7606_read_raw,
> -	.write_raw = &ad7606_write_raw,
> -	.attrs = &ad7606_attribute_group_os,
> -};
> -
> -static const struct iio_info ad7606_info_range = {
> -	.read_raw = &ad7606_read_raw,
> -	.write_raw = &ad7606_write_raw,
> -	.attrs = &ad7606_attribute_group_range,
> -};
> -
> -int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> -		 const char *name, unsigned int id,
> -		 const struct ad7606_bus_ops *bops)
> -{
> -	struct ad7606_state *st;
> -	int ret;
> -	struct iio_dev *indio_dev;
> -
> -	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
> -	if (!indio_dev)
> -		return -ENOMEM;
> -
> -	st = iio_priv(indio_dev);
> -
> -	st->dev = dev;
> -	mutex_init(&st->lock);
> -	st->bops = bops;
> -	st->base_address = base_address;
> -	/* tied to logic low, analog input range is +/- 5V */
> -	st->range = 0;
> -	st->oversampling = 1;
> -	INIT_WORK(&st->poll_work, &ad7606_poll_bh_to_ring);
> -
> -	st->reg = devm_regulator_get(dev, "avcc");
> -	if (IS_ERR(st->reg))
> -		return PTR_ERR(st->reg);
> -
> -	ret = regulator_enable(st->reg);
> -	if (ret) {
> -		dev_err(dev, "Failed to enable specified AVcc supply\n");
> -		return ret;
> -	}
> -
> -	st->chip_info = &ad7606_chip_info_tbl[id];
> -
> -	ret = ad7606_request_gpios(st);
> -	if (ret)
> -		goto error_disable_reg;
> -
> -	indio_dev->dev.parent = dev;
> -	if (st->gpio_os) {
> -		if (st->gpio_range)
> -			indio_dev->info = &ad7606_info_os_and_range;
> -		else
> -			indio_dev->info = &ad7606_info_os;
> -	} else {
> -		if (st->gpio_range)
> -			indio_dev->info = &ad7606_info_range;
> -		else
> -			indio_dev->info = &ad7606_info_no_os_or_range;
> -	}
> -	indio_dev->modes = INDIO_DIRECT_MODE;
> -	indio_dev->name = name;
> -	indio_dev->channels = st->chip_info->channels;
> -	indio_dev->num_channels = st->chip_info->num_channels;
> -
> -	init_waitqueue_head(&st->wq_data_avail);
> -
> -	ret = ad7606_reset(st);
> -	if (ret)
> -		dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n");
> -
> -	ret = request_irq(irq, ad7606_interrupt, IRQF_TRIGGER_FALLING, name,
> -			  indio_dev);
> -	if (ret)
> -		goto error_disable_reg;
> -
> -	ret = iio_triggered_buffer_setup(indio_dev, &ad7606_trigger_handler,
> -					 NULL, NULL);
> -	if (ret)
> -		goto error_free_irq;
> -
> -	ret = iio_device_register(indio_dev);
> -	if (ret)
> -		goto error_unregister_ring;
> -
> -	dev_set_drvdata(dev, indio_dev);
> -
> -	return 0;
> -error_unregister_ring:
> -	iio_triggered_buffer_cleanup(indio_dev);
> -
> -error_free_irq:
> -	free_irq(irq, indio_dev);
> -
> -error_disable_reg:
> -	regulator_disable(st->reg);
> -	return ret;
> -}
> -EXPORT_SYMBOL_GPL(ad7606_probe);
> -
> -int ad7606_remove(struct device *dev, int irq)
> -{
> -	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> -	struct ad7606_state *st = iio_priv(indio_dev);
> -
> -	iio_device_unregister(indio_dev);
> -	iio_triggered_buffer_cleanup(indio_dev);
> -
> -	free_irq(irq, indio_dev);
> -	regulator_disable(st->reg);
> -
> -	return 0;
> -}
> -EXPORT_SYMBOL_GPL(ad7606_remove);
> -
> -#ifdef CONFIG_PM_SLEEP
> -
> -static int ad7606_suspend(struct device *dev)
> -{
> -	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> -	struct ad7606_state *st = iio_priv(indio_dev);
> -
> -	if (st->gpio_standby) {
> -		gpiod_set_value(st->gpio_range, 1);
> -		gpiod_set_value(st->gpio_standby, 0);
> -	}
> -
> -	return 0;
> -}
> -
> -static int ad7606_resume(struct device *dev)
> -{
> -	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> -	struct ad7606_state *st = iio_priv(indio_dev);
> -
> -	if (st->gpio_standby) {
> -		gpiod_set_value(st->gpio_range, st->range);
> -		gpiod_set_value(st->gpio_standby, 1);
> -		ad7606_reset(st);
> -	}
> -
> -	return 0;
> -}
> -
> -SIMPLE_DEV_PM_OPS(ad7606_pm_ops, ad7606_suspend, ad7606_resume);
> -EXPORT_SYMBOL_GPL(ad7606_pm_ops);
> -
> -#endif
> -
> -MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
> -MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
> -MODULE_LICENSE("GPL v2");
> diff --git a/drivers/staging/iio/adc/ad7606.h b/drivers/staging/iio/adc/ad7606.h
> deleted file mode 100644
> index 8618805..0000000
> --- a/drivers/staging/iio/adc/ad7606.h
> +++ /dev/null
> @@ -1,106 +0,0 @@
> -/*
> - * AD7606 ADC driver
> - *
> - * Copyright 2011 Analog Devices Inc.
> - *
> - * Licensed under the GPL-2.
> - */
> -
> -#ifndef IIO_ADC_AD7606_H_
> -#define IIO_ADC_AD7606_H_
> -
> -/**
> - * struct ad7606_chip_info - chip specific information
> - * @channels:		channel specification
> - * @num_channels:	number of channels
> - * @has_oversampling:   whether the device has oversampling support
> - */
> -
> -struct ad7606_chip_info {
> -	const struct iio_chan_spec	*channels;
> -	unsigned int			num_channels;
> -	bool				has_oversampling;
> -};
> -
> -/**
> - * struct ad7606_state - driver instance specific data
> - * @dev		pointer to kernel device
> - * @chip_info		entry in the table of chips that describes this device
> - * @reg		regulator info for the the power supply of the device
> - * @poll_work		work struct for continuously reading data from the device
> - *			into an IIO triggered buffer
> - * @wq_data_avail	wait queue struct for buffer mode
> - * @bops		bus operations (SPI or parallel)
> - * @range		voltage range selection, selects which scale to apply
> - * @oversampling	oversampling selection
> - * @done		marks whether reading data is done
> - * @base_address	address from where to read data in parallel operation
> - * @lock		protect sensor state from concurrent accesses to GPIOs
> - * @gpio_convst	GPIO descriptor for conversion start signal (CONVST)
> - * @gpio_reset		GPIO descriptor for device hard-reset
> - * @gpio_range		GPIO descriptor for range selection
> - * @gpio_standby	GPIO descriptor for stand-by signal (STBY),
> - *			controls power-down mode of device
> - * @gpio_frstdata	GPIO descriptor for reading from device when data
> - *			is being read on the first channel
> - * @gpio_os		GPIO descriptors to control oversampling on the device
> - * @data		buffer for reading data from the device
> - */
> -
> -struct ad7606_state {
> -	struct device			*dev;
> -	const struct ad7606_chip_info	*chip_info;
> -	struct regulator		*reg;
> -	struct work_struct		poll_work;
> -	wait_queue_head_t		wq_data_avail;
> -	const struct ad7606_bus_ops	*bops;
> -	unsigned int			range;
> -	unsigned int			oversampling;
> -	bool				done;
> -	void __iomem			*base_address;
> -
> -	struct mutex			lock; /* protect sensor state */
> -	struct gpio_desc		*gpio_convst;
> -	struct gpio_desc		*gpio_reset;
> -	struct gpio_desc		*gpio_range;
> -	struct gpio_desc		*gpio_standby;
> -	struct gpio_desc		*gpio_frstdata;
> -	struct gpio_descs		*gpio_os;
> -
> -	/*
> -	 * DMA (thus cache coherency maintenance) requires the
> -	 * transfer buffers to live in their own cache lines.
> -	 * 8 * 16-bit samples + 64-bit timestamp
> -	 */
> -	unsigned short			data[12] ____cacheline_aligned;
> -};
> -
> -/**
> - * struct ad7606_bus_ops - driver bus operations
> - * @read_block		function pointer for reading blocks of data
> - */
> -struct ad7606_bus_ops {
> -	/* more methods added in future? */
> -	int (*read_block)(struct device *dev, int num, void *data);
> -};
> -
> -int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> -		 const char *name, unsigned int id,
> -		 const struct ad7606_bus_ops *bops);
> -int ad7606_remove(struct device *dev, int irq);
> -
> -enum ad7606_supported_device_ids {
> -	ID_AD7605_4,
> -	ID_AD7606_8,
> -	ID_AD7606_6,
> -	ID_AD7606_4
> -};
> -
> -#ifdef CONFIG_PM_SLEEP
> -extern const struct dev_pm_ops ad7606_pm_ops;
> -#define AD7606_PM_OPS (&ad7606_pm_ops)
> -#else
> -#define AD7606_PM_OPS NULL
> -#endif
> -
> -#endif /* IIO_ADC_AD7606_H_ */
> diff --git a/drivers/staging/iio/adc/ad7606_par.c b/drivers/staging/iio/adc/ad7606_par.c
> deleted file mode 100644
> index 8bd86e7..0000000
> --- a/drivers/staging/iio/adc/ad7606_par.c
> +++ /dev/null
> @@ -1,113 +0,0 @@
> -/*
> - * AD7606 Parallel Interface ADC driver
> - *
> - * Copyright 2011 Analog Devices Inc.
> - *
> - * Licensed under the GPL-2.
> - */
> -
> -#include <linux/module.h>
> -#include <linux/platform_device.h>
> -#include <linux/types.h>
> -#include <linux/err.h>
> -#include <linux/io.h>
> -
> -#include <linux/iio/iio.h>
> -#include "ad7606.h"
> -
> -static int ad7606_par16_read_block(struct device *dev,
> -				   int count, void *buf)
> -{
> -	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> -	struct ad7606_state *st = iio_priv(indio_dev);
> -
> -	insw((unsigned long)st->base_address, buf, count);
> -
> -	return 0;
> -}
> -
> -static const struct ad7606_bus_ops ad7606_par16_bops = {
> -	.read_block	= ad7606_par16_read_block,
> -};
> -
> -static int ad7606_par8_read_block(struct device *dev,
> -				  int count, void *buf)
> -{
> -	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> -	struct ad7606_state *st = iio_priv(indio_dev);
> -
> -	insb((unsigned long)st->base_address, buf, count * 2);
> -
> -	return 0;
> -}
> -
> -static const struct ad7606_bus_ops ad7606_par8_bops = {
> -	.read_block	= ad7606_par8_read_block,
> -};
> -
> -static int ad7606_par_probe(struct platform_device *pdev)
> -{
> -	const struct platform_device_id *id = platform_get_device_id(pdev);
> -	struct resource *res;
> -	void __iomem *addr;
> -	resource_size_t remap_size;
> -	int irq;
> -
> -	irq = platform_get_irq(pdev, 0);
> -	if (irq < 0) {
> -		dev_err(&pdev->dev, "no irq: %d\n", irq);
> -		return irq;
> -	}
> -
> -	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	addr = devm_ioremap_resource(&pdev->dev, res);
> -	if (IS_ERR(addr))
> -		return PTR_ERR(addr);
> -
> -	remap_size = resource_size(res);
> -
> -	return ad7606_probe(&pdev->dev, irq, addr,
> -			    id->name, id->driver_data,
> -			    remap_size > 1 ? &ad7606_par16_bops :
> -			    &ad7606_par8_bops);
> -}
> -
> -static int ad7606_par_remove(struct platform_device *pdev)
> -{
> -	return ad7606_remove(&pdev->dev, platform_get_irq(pdev, 0));
> -}
> -
> -static const struct platform_device_id ad7606_driver_ids[] = {
> -	{
> -		.name		= "ad7605-4",
> -		.driver_data	= ID_AD7605_4,
> -	}, {
> -		.name		= "ad7606-8",
> -		.driver_data	= ID_AD7606_8,
> -	}, {
> -		.name		= "ad7606-6",
> -		.driver_data	= ID_AD7606_6,
> -	}, {
> -		.name		= "ad7606-4",
> -		.driver_data	= ID_AD7606_4,
> -	},
> -	{ }
> -};
> -
> -MODULE_DEVICE_TABLE(platform, ad7606_driver_ids);
> -
> -static struct platform_driver ad7606_driver = {
> -	.probe = ad7606_par_probe,
> -	.remove	= ad7606_par_remove,
> -	.id_table = ad7606_driver_ids,
> -	.driver = {
> -		.name	 = "ad7606",
> -		.pm	 = AD7606_PM_OPS,
> -	},
> -};
> -
> -module_platform_driver(ad7606_driver);
> -
> -MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
> -MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
> -MODULE_LICENSE("GPL v2");
> diff --git a/drivers/staging/iio/adc/ad7606_spi.c b/drivers/staging/iio/adc/ad7606_spi.c
> deleted file mode 100644
> index b76ca5a..0000000
> --- a/drivers/staging/iio/adc/ad7606_spi.c
> +++ /dev/null
> @@ -1,79 +0,0 @@
> -/*
> - * AD7606 SPI ADC driver
> - *
> - * Copyright 2011 Analog Devices Inc.
> - *
> - * Licensed under the GPL-2.
> - */
> -
> -#include <linux/module.h>
> -#include <linux/spi/spi.h>
> -#include <linux/types.h>
> -#include <linux/err.h>
> -
> -#include <linux/iio/iio.h>
> -#include "ad7606.h"
> -
> -#define MAX_SPI_FREQ_HZ		23500000	/* VDRIVE above 4.75 V */
> -
> -static int ad7606_spi_read_block(struct device *dev,
> -				 int count, void *buf)
> -{
> -	struct spi_device *spi = to_spi_device(dev);
> -	int i, ret;
> -	unsigned short *data = buf;
> -	__be16 *bdata = buf;
> -
> -	ret = spi_read(spi, buf, count * 2);
> -	if (ret < 0) {
> -		dev_err(&spi->dev, "SPI read error\n");
> -		return ret;
> -	}
> -
> -	for (i = 0; i < count; i++)
> -		data[i] = be16_to_cpu(bdata[i]);
> -
> -	return 0;
> -}
> -
> -static const struct ad7606_bus_ops ad7606_spi_bops = {
> -	.read_block	= ad7606_spi_read_block,
> -};
> -
> -static int ad7606_spi_probe(struct spi_device *spi)
> -{
> -	const struct spi_device_id *id = spi_get_device_id(spi);
> -
> -	return ad7606_probe(&spi->dev, spi->irq, NULL,
> -			    id->name, id->driver_data,
> -			    &ad7606_spi_bops);
> -}
> -
> -static int ad7606_spi_remove(struct spi_device *spi)
> -{
> -	return ad7606_remove(&spi->dev, spi->irq);
> -}
> -
> -static const struct spi_device_id ad7606_id[] = {
> -	{"ad7605-4", ID_AD7605_4},
> -	{"ad7606-8", ID_AD7606_8},
> -	{"ad7606-6", ID_AD7606_6},
> -	{"ad7606-4", ID_AD7606_4},
> -	{}
> -};
> -MODULE_DEVICE_TABLE(spi, ad7606_id);
> -
> -static struct spi_driver ad7606_driver = {
> -	.driver = {
> -		.name = "ad7606",
> -		.pm = AD7606_PM_OPS,
> -	},
> -	.probe = ad7606_spi_probe,
> -	.remove = ad7606_spi_remove,
> -	.id_table = ad7606_id,
> -};
> -module_spi_driver(ad7606_driver);
> -
> -MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
> -MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
> -MODULE_LICENSE("GPL v2");


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2018-12-11 17:57 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-10 11:03 [PATCH v4 1/2] staging: iio: ad7606: Move out of staging Stefan Popa
2018-12-10 21:34 ` Jonathan Cameron
2018-12-11 17:57 ` Jonathan Cameron

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).