Re: [PATCH 05/11] staging: iio: adt7316: fix the dac read calculation

[Jonathan Cameron <jic23@kernel.org>]

On Tue, 11 Dec 2018 17:54:57 -0700
Jeremy Fertic <jeremyfertic@gmail.com> wrote:

> The calculation of the current dac value is using the wrong bits of the
> dac lsb register. Create two macros to shift the lsb register value into
> lsb position, depending on whether the dac is 10 or 12 bit. Initialize
> data to 0 so, with an 8 bit dac, the msb register value can be bitwise
> ORed with data.
> 
> Signed-off-by: Jeremy Fertic <jeremyfertic@gmail.com>
This looks good, but with the previous 2 patches under discussion I'll
hold this one for v2.

Thanks

Jonathan

> ---
>  drivers/staging/iio/addac/adt7316.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/staging/iio/addac/adt7316.c b/drivers/staging/iio/addac/adt7316.c
> index eee7c04f93f4..b7d12d003ddc 100644
> --- a/drivers/staging/iio/addac/adt7316.c
> +++ b/drivers/staging/iio/addac/adt7316.c
> @@ -47,6 +47,8 @@
>  #define ADT7516_MSB_AIN3		0xA
>  #define ADT7516_MSB_AIN4		0xB
>  #define ADT7316_DA_DATA_BASE		0x10
> +#define ADT7316_DA_10_BIT_LSB_SHIFT	6
> +#define ADT7316_DA_12_BIT_LSB_SHIFT	4
>  #define ADT7316_DA_MSB_DATA_REGS	4
>  #define ADT7316_LSB_DAC_A		0x10
>  #define ADT7316_MSB_DAC_A		0x11
> @@ -1403,7 +1405,7 @@ static IIO_DEVICE_ATTR(ex_analog_temp_offset, 0644,
>  static ssize_t adt7316_show_DAC(struct adt7316_chip_info *chip,
>  				int channel, char *buf)
>  {
> -	u16 data;
> +	u16 data = 0;
>  	u8 msb, lsb, offset;
>  	int ret;
>  
> @@ -1428,7 +1430,11 @@ static ssize_t adt7316_show_DAC(struct adt7316_chip_info *chip,
>  	if (ret)
>  		return -EIO;
>  
> -	data = (msb << offset) + (lsb & ((1 << offset) - 1));
> +	if (chip->dac_bits == 12)
> +		data = lsb >> ADT7316_DA_12_BIT_LSB_SHIFT;
> +	else if (chip->dac_bits == 10)
> +		data = lsb >> ADT7316_DA_10_BIT_LSB_SHIFT;
> +	data |= msb << offset;
>  
>  	return sprintf(buf, "%d\n", data);
>  }