* [PATCH V7] iio: magnetometer: mag3110: add vdd/vddio regulator operation support
@ 2019-01-08 9:16 Anson Huang
2019-01-12 19:00 ` Jonathan Cameron
0 siblings, 1 reply; 2+ messages in thread
From: Anson Huang @ 2019-01-08 9:16 UTC (permalink / raw)
To: jic23, knaack.h, lars, pmeerw, rtresidd, linux-iio, linux-kernel
Cc: dl-linux-imx
The magnetometer's power supplies could be controllable on some platforms,
such as i.MX6Q-SABRESD board, the mag3110's power supplies are controlled
by a GPIO fixed regulator, need to make sure the regulators are enabled
before any communication with mag3110, this patch adds vdd/vddio regulator
operation support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
ChangeLog Since V6:
- separate the error handling of regulators get to make code easy to read.
---
drivers/iio/magnetometer/mag3110.c | 94 ++++++++++++++++++++++++++++++++++----
1 file changed, 86 insertions(+), 8 deletions(-)
diff --git a/drivers/iio/magnetometer/mag3110.c b/drivers/iio/magnetometer/mag3110.c
index f063355..dd990cd 100644
--- a/drivers/iio/magnetometer/mag3110.c
+++ b/drivers/iio/magnetometer/mag3110.c
@@ -20,6 +20,7 @@
#include <linux/iio/buffer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
#define MAG3110_STATUS 0x00
#define MAG3110_OUT_X 0x01 /* MSB first */
@@ -56,6 +57,8 @@ struct mag3110_data {
struct mutex lock;
u8 ctrl_reg1;
int sleep_val;
+ struct regulator *vdd_reg;
+ struct regulator *vddio_reg;
};
static int mag3110_request(struct mag3110_data *data)
@@ -469,17 +472,50 @@ static int mag3110_probe(struct i2c_client *client,
struct iio_dev *indio_dev;
int ret;
- ret = i2c_smbus_read_byte_data(client, MAG3110_WHO_AM_I);
- if (ret < 0)
- return ret;
- if (ret != MAG3110_DEVICE_ID)
- return -ENODEV;
-
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
data = iio_priv(indio_dev);
+
+ data->vdd_reg = devm_regulator_get(&client->dev, "vdd");
+ if (IS_ERR(data->vdd_reg)) {
+ if (PTR_ERR(data->vdd_reg) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ dev_err(&client->dev, "failed to get VDD regulator!\n");
+ return PTR_ERR(data->vdd_reg);
+ }
+
+ data->vddio_reg = devm_regulator_get(&client->dev, "vddio");
+ if (IS_ERR(data->vddio_reg)) {
+ if (PTR_ERR(data->vddio_reg) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ dev_err(&client->dev, "failed to get VDDIO regulator!\n");
+ return PTR_ERR(data->vddio_reg);
+ }
+
+ ret = regulator_enable(data->vdd_reg);
+ if (ret) {
+ dev_err(&client->dev, "failed to enable VDD regulator!\n");
+ return ret;
+ }
+
+ ret = regulator_enable(data->vddio_reg);
+ if (ret) {
+ dev_err(&client->dev, "failed to enable VDDIO regulator!\n");
+ goto disable_regulator_vdd;
+ }
+
+ ret = i2c_smbus_read_byte_data(client, MAG3110_WHO_AM_I);
+ if (ret < 0)
+ goto disable_regulators;
+ if (ret != MAG3110_DEVICE_ID) {
+ ret = -ENODEV;
+ goto disable_regulators;
+ }
+
data->client = client;
mutex_init(&data->lock);
@@ -499,7 +535,7 @@ static int mag3110_probe(struct i2c_client *client,
ret = mag3110_change_config(data, MAG3110_CTRL_REG1, data->ctrl_reg1);
if (ret < 0)
- return ret;
+ goto disable_regulators;
ret = i2c_smbus_write_byte_data(client, MAG3110_CTRL_REG2,
MAG3110_CTRL_AUTO_MRST_EN);
@@ -520,16 +556,24 @@ static int mag3110_probe(struct i2c_client *client,
iio_triggered_buffer_cleanup(indio_dev);
standby_on_error:
mag3110_standby(iio_priv(indio_dev));
+disable_regulators:
+ regulator_disable(data->vddio_reg);
+disable_regulator_vdd:
+ regulator_disable(data->vdd_reg);
+
return ret;
}
static int mag3110_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct mag3110_data *data = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
iio_triggered_buffer_cleanup(indio_dev);
mag3110_standby(iio_priv(indio_dev));
+ regulator_disable(data->vddio_reg);
+ regulator_disable(data->vdd_reg);
return 0;
}
@@ -537,14 +581,48 @@ static int mag3110_remove(struct i2c_client *client)
#ifdef CONFIG_PM_SLEEP
static int mag3110_suspend(struct device *dev)
{
- return mag3110_standby(iio_priv(i2c_get_clientdata(
+ struct mag3110_data *data = iio_priv(i2c_get_clientdata(
+ to_i2c_client(dev)));
+ int ret;
+
+ ret = mag3110_standby(iio_priv(i2c_get_clientdata(
to_i2c_client(dev))));
+ if (ret)
+ return ret;
+
+ ret = regulator_disable(data->vddio_reg);
+ if (ret) {
+ dev_err(dev, "failed to disable VDDIO regulator\n");
+ return ret;
+ }
+
+ ret = regulator_disable(data->vdd_reg);
+ if (ret) {
+ dev_err(dev, "failed to disable VDD regulator\n");
+ return ret;
+ }
+
+ return 0;
}
static int mag3110_resume(struct device *dev)
{
struct mag3110_data *data = iio_priv(i2c_get_clientdata(
to_i2c_client(dev)));
+ int ret;
+
+ ret = regulator_enable(data->vdd_reg);
+ if (ret) {
+ dev_err(dev, "failed to enable VDD regulator\n");
+ return ret;
+ }
+
+ ret = regulator_enable(data->vddio_reg);
+ if (ret) {
+ dev_err(dev, "failed to enable VDDIO regulator\n");
+ regulator_disable(data->vdd_reg);
+ return ret;
+ }
return i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1,
data->ctrl_reg1);
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH V7] iio: magnetometer: mag3110: add vdd/vddio regulator operation support
2019-01-08 9:16 [PATCH V7] iio: magnetometer: mag3110: add vdd/vddio regulator operation support Anson Huang
@ 2019-01-12 19:00 ` Jonathan Cameron
0 siblings, 0 replies; 2+ messages in thread
From: Jonathan Cameron @ 2019-01-12 19:00 UTC (permalink / raw)
To: Anson Huang
Cc: knaack.h, lars, pmeerw, rtresidd, linux-iio, linux-kernel, dl-linux-imx
On Tue, 8 Jan 2019 09:16:04 +0000
Anson Huang <anson.huang@nxp.com> wrote:
> The magnetometer's power supplies could be controllable on some platforms,
> such as i.MX6Q-SABRESD board, the mag3110's power supplies are controlled
> by a GPIO fixed regulator, need to make sure the regulators are enabled
> before any communication with mag3110, this patch adds vdd/vddio regulator
> operation support.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Thanks for you persistence on these.
Applied to the togreg branch of iio.git and pushed out as testing to let
the autobuilders see if we missed anything.
Thanks,
Jonathan
> ---
> ChangeLog Since V6:
> - separate the error handling of regulators get to make code easy to read.
> ---
> drivers/iio/magnetometer/mag3110.c | 94 ++++++++++++++++++++++++++++++++++----
> 1 file changed, 86 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/iio/magnetometer/mag3110.c b/drivers/iio/magnetometer/mag3110.c
> index f063355..dd990cd 100644
> --- a/drivers/iio/magnetometer/mag3110.c
> +++ b/drivers/iio/magnetometer/mag3110.c
> @@ -20,6 +20,7 @@
> #include <linux/iio/buffer.h>
> #include <linux/iio/triggered_buffer.h>
> #include <linux/delay.h>
> +#include <linux/regulator/consumer.h>
>
> #define MAG3110_STATUS 0x00
> #define MAG3110_OUT_X 0x01 /* MSB first */
> @@ -56,6 +57,8 @@ struct mag3110_data {
> struct mutex lock;
> u8 ctrl_reg1;
> int sleep_val;
> + struct regulator *vdd_reg;
> + struct regulator *vddio_reg;
> };
>
> static int mag3110_request(struct mag3110_data *data)
> @@ -469,17 +472,50 @@ static int mag3110_probe(struct i2c_client *client,
> struct iio_dev *indio_dev;
> int ret;
>
> - ret = i2c_smbus_read_byte_data(client, MAG3110_WHO_AM_I);
> - if (ret < 0)
> - return ret;
> - if (ret != MAG3110_DEVICE_ID)
> - return -ENODEV;
> -
> indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> if (!indio_dev)
> return -ENOMEM;
>
> data = iio_priv(indio_dev);
> +
> + data->vdd_reg = devm_regulator_get(&client->dev, "vdd");
> + if (IS_ERR(data->vdd_reg)) {
> + if (PTR_ERR(data->vdd_reg) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> +
> + dev_err(&client->dev, "failed to get VDD regulator!\n");
> + return PTR_ERR(data->vdd_reg);
> + }
> +
> + data->vddio_reg = devm_regulator_get(&client->dev, "vddio");
> + if (IS_ERR(data->vddio_reg)) {
> + if (PTR_ERR(data->vddio_reg) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> +
> + dev_err(&client->dev, "failed to get VDDIO regulator!\n");
> + return PTR_ERR(data->vddio_reg);
> + }
> +
> + ret = regulator_enable(data->vdd_reg);
> + if (ret) {
> + dev_err(&client->dev, "failed to enable VDD regulator!\n");
> + return ret;
> + }
> +
> + ret = regulator_enable(data->vddio_reg);
> + if (ret) {
> + dev_err(&client->dev, "failed to enable VDDIO regulator!\n");
> + goto disable_regulator_vdd;
> + }
> +
> + ret = i2c_smbus_read_byte_data(client, MAG3110_WHO_AM_I);
> + if (ret < 0)
> + goto disable_regulators;
> + if (ret != MAG3110_DEVICE_ID) {
> + ret = -ENODEV;
> + goto disable_regulators;
> + }
> +
> data->client = client;
> mutex_init(&data->lock);
>
> @@ -499,7 +535,7 @@ static int mag3110_probe(struct i2c_client *client,
>
> ret = mag3110_change_config(data, MAG3110_CTRL_REG1, data->ctrl_reg1);
> if (ret < 0)
> - return ret;
> + goto disable_regulators;
>
> ret = i2c_smbus_write_byte_data(client, MAG3110_CTRL_REG2,
> MAG3110_CTRL_AUTO_MRST_EN);
> @@ -520,16 +556,24 @@ static int mag3110_probe(struct i2c_client *client,
> iio_triggered_buffer_cleanup(indio_dev);
> standby_on_error:
> mag3110_standby(iio_priv(indio_dev));
> +disable_regulators:
> + regulator_disable(data->vddio_reg);
> +disable_regulator_vdd:
> + regulator_disable(data->vdd_reg);
> +
> return ret;
> }
>
> static int mag3110_remove(struct i2c_client *client)
> {
> struct iio_dev *indio_dev = i2c_get_clientdata(client);
> + struct mag3110_data *data = iio_priv(indio_dev);
>
> iio_device_unregister(indio_dev);
> iio_triggered_buffer_cleanup(indio_dev);
> mag3110_standby(iio_priv(indio_dev));
> + regulator_disable(data->vddio_reg);
> + regulator_disable(data->vdd_reg);
>
> return 0;
> }
> @@ -537,14 +581,48 @@ static int mag3110_remove(struct i2c_client *client)
> #ifdef CONFIG_PM_SLEEP
> static int mag3110_suspend(struct device *dev)
> {
> - return mag3110_standby(iio_priv(i2c_get_clientdata(
> + struct mag3110_data *data = iio_priv(i2c_get_clientdata(
> + to_i2c_client(dev)));
> + int ret;
> +
> + ret = mag3110_standby(iio_priv(i2c_get_clientdata(
> to_i2c_client(dev))));
> + if (ret)
> + return ret;
> +
> + ret = regulator_disable(data->vddio_reg);
> + if (ret) {
> + dev_err(dev, "failed to disable VDDIO regulator\n");
> + return ret;
> + }
> +
> + ret = regulator_disable(data->vdd_reg);
> + if (ret) {
> + dev_err(dev, "failed to disable VDD regulator\n");
> + return ret;
> + }
> +
> + return 0;
> }
>
> static int mag3110_resume(struct device *dev)
> {
> struct mag3110_data *data = iio_priv(i2c_get_clientdata(
> to_i2c_client(dev)));
> + int ret;
> +
> + ret = regulator_enable(data->vdd_reg);
> + if (ret) {
> + dev_err(dev, "failed to enable VDD regulator\n");
> + return ret;
> + }
> +
> + ret = regulator_enable(data->vddio_reg);
> + if (ret) {
> + dev_err(dev, "failed to enable VDDIO regulator\n");
> + regulator_disable(data->vdd_reg);
> + return ret;
> + }
>
> return i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1,
> data->ctrl_reg1);
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-01-12 19:01 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-08 9:16 [PATCH V7] iio: magnetometer: mag3110: add vdd/vddio regulator operation support Anson Huang
2019-01-12 19:00 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).