From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-9.1 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_PASS,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 21A77C282C8 for ; Mon, 28 Jan 2019 18:50:37 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id D8DBF21741 for ; Mon, 28 Jan 2019 18:50:36 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=gaireg.de header.i=@gaireg.de header.b="NyNlEmIu" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727029AbfA1Sug (ORCPT ); Mon, 28 Jan 2019 13:50:36 -0500 Received: from gaireg.de ([37.221.197.43]:36780 "EHLO gaireg.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726678AbfA1Sug (ORCPT ); Mon, 28 Jan 2019 13:50:36 -0500 Received: from me.gaireg.de (unknown [194.8.217.178]) by gaireg.de (Postfix) with ESMTPSA id B72C03C8CE8B; Mon, 28 Jan 2019 19:50:32 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=gaireg.de; s=mail; t=1548701432; bh=D3yZ0FNHu9dReKLxPlFBbPwCTik+k/UyeKDlovkbTRY=; h=From:To:Cc:Subject:Date:In-Reply-To:References; b=NyNlEmIuKgjpuWTaV22dxlOn3Vqy+DqygsX688QRXqhGlDJ9rbU4U4S6jteZq5AQt tck2kPXwTwvVzf+X+RjtwvqebZUytYdjTNV5k/rJMsqyqdRzb8WEWyLZGsuWePYYF1 8uB+lZwB5DnRoIqyrUHvOIInmzBRf45c9q6BMlvY= From: =?UTF-8?q?Randolph=20Maa=C3=9Fen?= To: gaireg@gaireg.de Cc: Jonathan Cameron , Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald-Stadler , Rob Herring , Mark Rutland , Brian Masney , Jonathan Marek , Jean-Baptiste Maneyrol , Martin Kelly , Douglas Fischer , Hans de Goede , linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 2/2] iio: imu: mpu6050: Add support for the ICM 20602 IMU Date: Mon, 28 Jan 2019 19:50:03 +0100 Message-Id: <20190128185010.8275-2-gaireg@gaireg.de> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20190128185010.8275-1-gaireg@gaireg.de> References: <20190128185010.8275-1-gaireg@gaireg.de> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-iio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org The Invensense ICM-20602 is a 6-axis MotionTracking device that combines a 3-axis gyroscope and an 3-axis accelerometer. It is very similar to the ICM-20608 imu which is already supported by the mpu6050 driver. The main difference is that the ICM-20602 has the i2c bus disable bit in a separate register. Signed-off-by: Randolph Maaßen --- drivers/iio/imu/inv_mpu6050/Kconfig | 8 ++++---- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 31 ++++++++++++++++++++++++++++++ drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 6 ++++++ drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 8 ++++++++ drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 12 +++++++++--- 5 files changed, 58 insertions(+), 7 deletions(-) diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig index 5483b2ea754d..d2fe9dbddda7 100644 --- a/drivers/iio/imu/inv_mpu6050/Kconfig +++ b/drivers/iio/imu/inv_mpu6050/Kconfig @@ -13,8 +13,8 @@ config INV_MPU6050_I2C select INV_MPU6050_IIO select REGMAP_I2C help - This driver supports the Invensense MPU6050/6500/9150 and ICM20608 - motion tracking devices over I2C. + This driver supports the Invensense MPU6050/6500/9150 and + ICM20608/20602 motion tracking devices over I2C. This driver can be built as a module. The module will be called inv-mpu6050-i2c. @@ -24,7 +24,7 @@ config INV_MPU6050_SPI select INV_MPU6050_IIO select REGMAP_SPI help - This driver supports the Invensense MPU6050/6500/9150 and ICM20608 - motion tracking devices over SPI. + This driver supports the Invensense MPU6050/6500/9150 and + ICM20608/20602 motion tracking devices over SPI. This driver can be built as a module. The module will be called inv-mpu6050-spi. diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index 1e428c196a82..650de0fefb7b 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -38,6 +38,29 @@ static const int gyro_scale_6050[] = {133090, 266181, 532362, 1064724}; */ static const int accel_scale[] = {598, 1196, 2392, 4785}; +static const struct inv_mpu6050_reg_map reg_set_icm20602 = { + .sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV, + .lpf = INV_MPU6050_REG_CONFIG, + .accel_lpf = INV_MPU6500_REG_ACCEL_CONFIG_2, + .user_ctrl = INV_MPU6050_REG_USER_CTRL, + .fifo_en = INV_MPU6050_REG_FIFO_EN, + .gyro_config = INV_MPU6050_REG_GYRO_CONFIG, + .accl_config = INV_MPU6050_REG_ACCEL_CONFIG, + .fifo_count_h = INV_MPU6050_REG_FIFO_COUNT_H, + .fifo_r_w = INV_MPU6050_REG_FIFO_R_W, + .raw_gyro = INV_MPU6050_REG_RAW_GYRO, + .raw_accl = INV_MPU6050_REG_RAW_ACCEL, + .temperature = INV_MPU6050_REG_TEMPERATURE, + .int_enable = INV_MPU6050_REG_INT_ENABLE, + .int_status = INV_MPU6050_REG_INT_STATUS, + .pwr_mgmt_1 = INV_MPU6050_REG_PWR_MGMT_1, + .pwr_mgmt_2 = INV_MPU6050_REG_PWR_MGMT_2, + .int_pin_cfg = INV_MPU6050_REG_INT_PIN_CFG, + .accl_offset = INV_MPU6500_REG_ACCEL_OFFSET, + .gyro_offset = INV_MPU6050_REG_GYRO_OFFSET, + .i2c_if = INV_ICM20602_REG_I2C_IF, +}; + static const struct inv_mpu6050_reg_map reg_set_6500 = { .sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV, .lpf = INV_MPU6050_REG_CONFIG, @@ -58,6 +81,7 @@ static const struct inv_mpu6050_reg_map reg_set_6500 = { .int_pin_cfg = INV_MPU6050_REG_INT_PIN_CFG, .accl_offset = INV_MPU6500_REG_ACCEL_OFFSET, .gyro_offset = INV_MPU6050_REG_GYRO_OFFSET, + .i2c_if = 0, }; static const struct inv_mpu6050_reg_map reg_set_6050 = { @@ -78,6 +102,7 @@ static const struct inv_mpu6050_reg_map reg_set_6050 = { .int_pin_cfg = INV_MPU6050_REG_INT_PIN_CFG, .accl_offset = INV_MPU6050_REG_ACCEL_OFFSET, .gyro_offset = INV_MPU6050_REG_GYRO_OFFSET, + .i2c_if = 0, }; static const struct inv_mpu6050_chip_config chip_config_6050 = { @@ -140,6 +165,12 @@ static const struct inv_mpu6050_hw hw_info[] = { .reg = ®_set_6500, .config = &chip_config_6050, }, + { + .whoami = INV_ICM20602_WHOAMI_VALUE, + .name = "ICM20602", + .reg = ®_set_icm20602, + .config = &chip_config_6050, + }, }; int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask) diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c index dd758e3d403d..e46eb4ddea21 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c @@ -127,6 +127,7 @@ static int inv_mpu_probe(struct i2c_client *client, st = iio_priv(dev_get_drvdata(&client->dev)); switch (st->chip_type) { case INV_ICM20608: + case INV_ICM20602: /* no i2c auxiliary bus on the chip */ break; default: @@ -179,6 +180,7 @@ static const struct i2c_device_id inv_mpu_id[] = { {"mpu9250", INV_MPU9250}, {"mpu9255", INV_MPU9255}, {"icm20608", INV_ICM20608}, + {"icm20602", INV_ICM20602}, {} }; @@ -213,6 +215,10 @@ static const struct of_device_id inv_of_match[] = { .compatible = "invensense,icm20608", .data = (void *)INV_ICM20608 }, + { + .compatible = "invensense,icm20602", + .data = (void *)INV_ICM20602 + }, { } }; MODULE_DEVICE_TABLE(of, inv_of_match); diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index 6bcc11fc1b88..325afd9f5f61 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -44,6 +44,7 @@ * @int_pin_cfg; Controls interrupt pin configuration. * @accl_offset: Controls the accelerometer calibration offset. * @gyro_offset: Controls the gyroscope calibration offset. + * @i2c_if: Controls the i2c interface */ struct inv_mpu6050_reg_map { u8 sample_rate_div; @@ -65,6 +66,7 @@ struct inv_mpu6050_reg_map { u8 int_pin_cfg; u8 accl_offset; u8 gyro_offset; + u8 i2c_if; }; /*device enum */ @@ -77,6 +79,7 @@ enum inv_devices { INV_MPU9250, INV_MPU9255, INV_ICM20608, + INV_ICM20602, INV_NUM_PARTS }; @@ -195,6 +198,10 @@ struct inv_mpu6050_state { #define INV_MPU6050_BIT_PWR_ACCL_STBY 0x38 #define INV_MPU6050_BIT_PWR_GYRO_STBY 0x07 +/* ICM20602 register */ +#define INV_ICM20602_REG_I2C_IF 0x70 +#define INV_ICM20602_BIT_I2C_IF_DIS 0x40 + #define INV_MPU6050_REG_FIFO_COUNT_H 0x72 #define INV_MPU6050_REG_FIFO_R_W 0x74 @@ -261,6 +268,7 @@ struct inv_mpu6050_state { #define INV_MPU9255_WHOAMI_VALUE 0x73 #define INV_MPU6515_WHOAMI_VALUE 0x74 #define INV_ICM20608_WHOAMI_VALUE 0xAF +#define INV_ICM20602_WHOAMI_VALUE 0x12 /* scan element definition */ enum inv_mpu6050_scan { diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c index 227f50afff22..a112c3f45f74 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c @@ -31,9 +31,14 @@ static int inv_mpu_i2c_disable(struct iio_dev *indio_dev) if (ret) return ret; - st->chip_config.user_ctrl |= INV_MPU6050_BIT_I2C_IF_DIS; - ret = regmap_write(st->map, st->reg->user_ctrl, - st->chip_config.user_ctrl); + if (st->reg->i2c_if) { + ret = regmap_write(st->map, st->reg->i2c_if, + INV_ICM20602_BIT_I2C_IF_DIS); + } else { + st->chip_config.user_ctrl |= INV_MPU6050_BIT_I2C_IF_DIS; + ret = regmap_write(st->map, st->reg->user_ctrl, + st->chip_config.user_ctrl); + } if (ret) { inv_mpu6050_set_power_itg(st, false); return ret; @@ -81,6 +86,7 @@ static const struct spi_device_id inv_mpu_id[] = { {"mpu9250", INV_MPU9250}, {"mpu9255", INV_MPU9255}, {"icm20608", INV_ICM20608}, + {"icm20602", INV_ICM20602}, {} }; -- 2.11.0