Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Beniamin Bia <biabeniamin@outlook.com>
Cc: <lars@metafoo.de>, <Michael.Hennerich@analog.com>,
	<knaack.h@gmx.de>, <pmeerw@pmeerw.net>,
	<gregkh@linuxfoundation.org>, <linux-iio@vger.kernel.org>,
	<devel@driverdev.osuosl.org>, <linux-kernel@vger.kernel.org>,
	Beniamin Bia <biabeniamin@gmail.com>,
	Beniamin Bia <beniamin.bia@analog.com>
Subject: Re: [PATCH v2 1/2] staging: iio: frequency: ad9833: Get frequency value statically
Date: Sat, 2 Feb 2019 17:05:47 +0000
Message-ID: <20190202170547.586078d7@archlinux> (raw)
In-Reply-To: <20190201150138.31481-1-biabeniamin@outlook.com>

On Fri, 1 Feb 2019 17:01:37 +0200
Beniamin Bia <biabeniamin@outlook.com> wrote:

> From: Beniamin Bia <biabeniamin@gmail.com>
> 
> The values from platform data were replaced by statically values.
> This was just a intermediate step of taking this driver out of staging and
> load data from device tree.
> 
> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.

Thanks,

Jonathan
> ---
> Changes in v2:
>         - The platform data structure was removed and the values are
>           written directly
>  drivers/staging/iio/frequency/ad9834.c | 21 +++++++------------
>  drivers/staging/iio/frequency/ad9834.h | 28 --------------------------
>  2 files changed, 7 insertions(+), 42 deletions(-)
> 
> diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c
> index 995acdd7c942..f4f5eaa15e30 100644
> --- a/drivers/staging/iio/frequency/ad9834.c
> +++ b/drivers/staging/iio/frequency/ad9834.c
> @@ -391,16 +391,11 @@ static const struct iio_info ad9833_info = {
>  
>  static int ad9834_probe(struct spi_device *spi)
>  {
> -	struct ad9834_platform_data *pdata = dev_get_platdata(&spi->dev);
>  	struct ad9834_state *st;
>  	struct iio_dev *indio_dev;
>  	struct regulator *reg;
>  	int ret;
>  
> -	if (!pdata) {
> -		dev_dbg(&spi->dev, "no platform data?\n");
> -		return -ENODEV;
> -	}
>  
>  	reg = devm_regulator_get(&spi->dev, "avdd");
>  	if (IS_ERR(reg))
> @@ -420,7 +415,7 @@ static int ad9834_probe(struct spi_device *spi)
>  	spi_set_drvdata(spi, indio_dev);
>  	st = iio_priv(indio_dev);
>  	mutex_init(&st->lock);
> -	st->mclk = pdata->mclk;
> +	st->mclk = 25000000;
>  	st->spi = spi;
>  	st->devid = spi_get_device_id(spi)->driver_data;
>  	st->reg = reg;
> @@ -456,11 +451,9 @@ static int ad9834_probe(struct spi_device *spi)
>  	spi_message_add_tail(&st->freq_xfer[1], &st->freq_msg);
>  
>  	st->control = AD9834_B28 | AD9834_RESET;
> +	st->control |= AD9834_DIV2;
>  
> -	if (!pdata->en_div2)
> -		st->control |= AD9834_DIV2;
> -
> -	if (!pdata->en_signbit_msb_out && (st->devid == ID_AD9834))
> +	if (st->devid == ID_AD9834)
>  		st->control |= AD9834_SIGN_PIB;
>  
>  	st->data = cpu_to_be16(AD9834_REG_CMD | st->control);
> @@ -470,19 +463,19 @@ static int ad9834_probe(struct spi_device *spi)
>  		goto error_disable_reg;
>  	}
>  
> -	ret = ad9834_write_frequency(st, AD9834_REG_FREQ0, pdata->freq0);
> +	ret = ad9834_write_frequency(st, AD9834_REG_FREQ0, 1000000);
>  	if (ret)
>  		goto error_disable_reg;
>  
> -	ret = ad9834_write_frequency(st, AD9834_REG_FREQ1, pdata->freq1);
> +	ret = ad9834_write_frequency(st, AD9834_REG_FREQ1, 5000000);
>  	if (ret)
>  		goto error_disable_reg;
>  
> -	ret = ad9834_write_phase(st, AD9834_REG_PHASE0, pdata->phase0);
> +	ret = ad9834_write_phase(st, AD9834_REG_PHASE0, 512);
>  	if (ret)
>  		goto error_disable_reg;
>  
> -	ret = ad9834_write_phase(st, AD9834_REG_PHASE1, pdata->phase1);
> +	ret = ad9834_write_phase(st, AD9834_REG_PHASE1, 1024);
>  	if (ret)
>  		goto error_disable_reg;
>  
> diff --git a/drivers/staging/iio/frequency/ad9834.h b/drivers/staging/iio/frequency/ad9834.h
> index ae620f38eb49..da7e83ceedad 100644
> --- a/drivers/staging/iio/frequency/ad9834.h
> +++ b/drivers/staging/iio/frequency/ad9834.h
> @@ -8,32 +8,4 @@
>  #ifndef IIO_DDS_AD9834_H_
>  #define IIO_DDS_AD9834_H_
>  
> -/*
> - * TODO: struct ad7887_platform_data needs to go into include/linux/iio
> - */
> -
> -/**
> - * struct ad9834_platform_data - platform specific information
> - * @mclk:		master clock in Hz
> - * @freq0:		power up freq0 tuning word in Hz
> - * @freq1:		power up freq1 tuning word in Hz
> - * @phase0:		power up phase0 value [0..4095] correlates with 0..2PI
> - * @phase1:		power up phase1 value [0..4095] correlates with 0..2PI
> - * @en_div2:		digital output/2 is passed to the SIGN BIT OUT pin
> - * @en_signbit_msb_out:	the MSB (or MSB/2) of the DAC data is connected to the
> - *			SIGN BIT OUT pin. en_div2 controls whether it is the MSB
> - *			or MSB/2 that is output. if en_signbit_msb_out=false,
> - *			the on-board comparator is connected to SIGN BIT OUT
> - */
> -
> -struct ad9834_platform_data {
> -	unsigned int		mclk;
> -	unsigned int		freq0;
> -	unsigned int		freq1;
> -	unsigned short		phase0;
> -	unsigned short		phase1;
> -	bool			en_div2;
> -	bool			en_signbit_msb_out;
> -};
> -
>  #endif /* IIO_DDS_AD9834_H_ */


       reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20190201150138.31481-1-biabeniamin@outlook.com>
2019-02-02 17:05 ` Jonathan Cameron [this message]
     [not found] ` <20190201150138.31481-2-biabeniamin@outlook.com>
2019-02-02 17:07   ` [PATCH v2 2/2] staging: iio: frequency: ad9833: Load clock using clock framework Jonathan Cameron

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190202170547.586078d7@archlinux \
    --to=jic23@kernel.org \
    --cc=Michael.Hennerich@analog.com \
    --cc=beniamin.bia@analog.com \
    --cc=biabeniamin@gmail.com \
    --cc=biabeniamin@outlook.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pmeerw@pmeerw.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org linux-iio@archiver.kernel.org
	public-inbox-index linux-iio


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/ public-inbox