[PATCH v2 0/5] iio: gyro: add fxas2100x driver

From: Rui Miguel Silva <rui.silva@linaro.org>
To: Jonathan Cameron <jic23@kernel.org>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Fabio Estevam <fabio.estevam@nxp.com>
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	Rui Miguel Silva <rui.silva@linaro.org>
Subject: [PATCH v2 0/5] iio: gyro: add fxas2100x driver
Date: Tue,  5 Feb 2019 17:43:28 +0000	[thread overview]
Message-ID: <20190205174333.17672-1-rui.silva@linaro.org> (raw)

Hi,
This series introduce a NXP fxas2100x family tri axis gyroscope driver [0]
It add a core implementaiton plus an i2c and spi.

This device can be found in the warp7 board [1], where it was tested.

---
Cheers,
   Rui

v1->v2:
Peter Meerwal-Stadler:
  - changed (c) to current year
  - add regmap include file in .h
  - fix comments s/cuttof/cutoff/
  - add more info in mutex comment
  - check value in range_fs_from_value
  - ret not checked in range_value_from_fs
  - move mode to enum type
  - remove line between value get and validation of value in all file
  - pre-write, regmap_field_write, post_write refactoring
  - check val2 and val == 0 in write raw
  - check in_anglvel_scale: 7.8125?
  - trigger_handler: 2 => sizeof(s16)
  - check buffer size
  - print %02% to output chip id
  - remove !! as state is bool
  - trigger probe return devm_iio_trigger_register
  - remove error msg in case of devm_iio_device_register
Fabio Estebam:
  - rename FXAS2100X to FXAS21002
  - change compatible nxp,fxas2100x to the exact support
  - add VDD and VDDIO regulators in bindings and driver

[0]: https://www.nxp.com/docs/en/data-sheet/FXAS21002.pdf
[1]: https://www.element14.com/community/community/designcenter/single-board-computers/warp7/overview

Rui Miguel Silva (5):
  iio: gyro: add DT bindings to fxas21002
  iio: gyro: fxas2100x: add core driver for fxas2100x gyroscope
  iio: gyro: fxas2100x: add i2c driver
  iio: gyro: fxas2100x: add spi driver
  ARM: dts: imx7s-warp: add fxas21002 gyroscope

 .../bindings/iio/gyroscope/fxas2100x.txt      |  18 +
 arch/arm/boot/dts/imx7s-warp.dts              |   7 +
 drivers/iio/gyro/Kconfig                      |  22 +
 drivers/iio/gyro/Makefile                     |   3 +
 drivers/iio/gyro/fxas2100x.h                  | 151 +++
 drivers/iio/gyro/fxas2100x_core.c             | 931 ++++++++++++++++++
 drivers/iio/gyro/fxas2100x_i2c.c              |  73 ++
 drivers/iio/gyro/fxas2100x_spi.c              |  70 ++
 8 files changed, 1275 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/fxas2100x.txt
 create mode 100644 drivers/iio/gyro/fxas2100x.h
 create mode 100644 drivers/iio/gyro/fxas2100x_core.c
 create mode 100644 drivers/iio/gyro/fxas2100x_i2c.c
 create mode 100644 drivers/iio/gyro/fxas2100x_spi.c

-- 
2.20.1