linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 00/30] Update cros_ec_commands.h
@ 2019-05-03 22:02 Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 01/30] mfd: cros_ec: Update license term Gwendal Grignou
                   ` (30 more replies)
  0 siblings, 31 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

The interface between CrosEC embedded controller and the host,
described by cros_ec_commands.h, as diverged from what the embedded
controller really support.

The source of thruth is at
https://chromium.googlesource.com/chromiumos/platform/ec/+/master/include/ec_commands.h

That include file is converted to remove ACPI and Embedded only code.

From now on, cros_ec_commands.h will be automatically generated from
the file above, do not modify directly.

Fell free to squash the commits below.

Changes in v2:
- Move I2S changes at the end of the patchset, squashed with change in
  sound/soc/codecs/cros_ec_codec.c to match new interface.
- Add Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Gwendal Grignou (30):
  mfd: cros_ec: Update license term
  mfd: cros_ec: Zero BUILD_ macro
  mfd: cros_ec: set comments properly
  mfd: cros_ec: add ec_align macros
  mfd: cros_ec: Define commands as 4-digit UPPER CASE hex values
  mfd: cros_ec: use BIT macro
  mfd: cros_ec: Update ACPI interface definition
  mfd: cros_ec: move HDMI CEC API definition
  mfd: cros_ec: Remove zero-size structs
  mfd: cros_ec: Add Flash V2 commands API
  mfd: cros_ec: Add PWM_SET_DUTY API
  mfd: cros_ec: Add lightbar v2 API
  mfd: cros_ec: Expand hash API
  mfd: cros_ec: Add EC transport protocol v4
  mfd: cros_ec: Complete MEMS sensor API
  mfd: cros_ec: Fix event processing API
  mfd: cros_ec: Add fingerprint API
  mfd: cros_ec: Fix temperature API
  mfd: cros_ec: Complete Power and USB PD API
  mfd: cros_ec: Add API for keyboard testing
  mfd: cros_ec: Add Hibernate API
  mfd: cros_ec: Add Smart Battery Firmware update API
  mfd: cros_ec: Add I2C passthru protection API
  mfd: cros_ec: Add API for EC-EC communication
  mfd: cros_ec: Add API for Touchpad support
  mfd: cros_ec: Add API for Fingerprint support
  mfd: cros_ec: Add API for rwsig
  mfd: cros_ec: Add SKU ID and Secure storage API
  mfd: cros_ec: Add Management API entry points
  mfd: cros_ec: Update I2S API

 include/linux/mfd/cros_ec_commands.h | 3735 +++++++++++++++++++++-----
 sound/soc/codecs/cros_ec_codec.c     |    8 +-
 2 files changed, 2997 insertions(+), 746 deletions(-)

-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH v2 01/30] mfd: cros_ec: Update license term
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-05 15:46   ` Jonathan Cameron
  2019-05-03 22:02 ` [PATCH v2 02/30] mfd: cros_ec: Zero BUILD_ macro Gwendal Grignou
                   ` (29 subsequent siblings)
  30 siblings, 1 reply; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Update to SPDX-License-Identifier, GPL-2.0

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 43bee4f7d137..6fa508643da3 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -1,25 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Host communication command constants for ChromeOS EC
  *
  * Copyright (C) 2012 Google, Inc
  *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * The ChromeOS EC multi function device is used to mux all the requests
- * to the EC device for its multiple features: keyboard controller,
- * battery charging and regulator control, firmware update.
- *
- * NOTE: This file is copied verbatim from the ChromeOS EC Open Source
- * project in an attempt to make future updates easy to make.
+ * NOTE: This file is auto-generated from ChromeOS EC Open Source code from
+ * https://chromium.googlesource.com/chromiumos/platform/ec/+/master/include/ec_commands.h
  */
 
+/* Host communication command constants for Chrome EC */
+
 #ifndef __CROS_EC_COMMANDS_H
 #define __CROS_EC_COMMANDS_H
 
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 02/30] mfd: cros_ec: Zero BUILD_ macro
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 01/30] mfd: cros_ec: Update license term Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 03/30] mfd: cros_ec: set comments properly Gwendal Grignou
                   ` (28 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Defined out build macro used when compiling embedded controller
firmware.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 6fa508643da3..374f64caeb5f 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -13,6 +13,11 @@
 #ifndef __CROS_EC_COMMANDS_H
 #define __CROS_EC_COMMANDS_H
 
+
+
+
+#define BUILD_ASSERT(_cond)
+
 /*
  * Current version of this protocol
  *
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 03/30] mfd: cros_ec: set comments properly
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 01/30] mfd: cros_ec: Update license term Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 02/30] mfd: cros_ec: Zero BUILD_ macro Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 04/30] mfd: cros_ec: add ec_align macros Gwendal Grignou
                   ` (27 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Fix comments syntax and spelling errors.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 67 +++++++++++++++++-----------
 1 file changed, 41 insertions(+), 26 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 374f64caeb5f..43fe1697b18b 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -42,13 +42,16 @@
 /* Protocol version 2 */
 #define EC_LPC_ADDR_HOST_ARGS    0x800  /* And 0x801, 0x802, 0x803 */
 #define EC_LPC_ADDR_HOST_PARAM   0x804  /* For version 2 params; size is
-					 * EC_PROTO2_MAX_PARAM_SIZE */
+					 * EC_PROTO2_MAX_PARAM_SIZE
+					 */
 /* Protocol version 3 */
 #define EC_LPC_ADDR_HOST_PACKET  0x800  /* Offset of version 3 packet */
 #define EC_LPC_HOST_PACKET_SIZE  0x100  /* Max size of version 3 packet */
 
-/* The actual block is 0x800-0x8ff, but some BIOSes think it's 0x880-0x8ff
- * and they tell the kernel that so we have to think of it as two parts. */
+/*
+ * The actual block is 0x800-0x8ff, but some BIOSes think it's 0x880-0x8ff
+ * and they tell the kernel that so we have to think of it as two parts.
+ */
 #define EC_HOST_CMD_REGION0    0x800
 #define EC_HOST_CMD_REGION1    0x880
 #define EC_HOST_CMD_REGION_SIZE 0x80
@@ -324,7 +327,7 @@ struct ec_lpc_host_args {
  * If EC gets a command and this flag is not set, this is an old-style command.
  * Command version is 0 and params from host are at EC_LPC_ADDR_OLD_PARAM with
  * unknown length.  EC must respond with an old-style response (that is,
- * withouth setting EC_HOST_ARGS_FLAG_TO_HOST).
+ * without setting EC_HOST_ARGS_FLAG_TO_HOST).
  */
 #define EC_HOST_ARGS_FLAG_FROM_HOST 0x01
 /*
@@ -511,7 +514,7 @@ struct ec_host_response {
  * Notes on commands:
  *
  * Each command is an 16-bit command value.  Commands which take params or
- * return response data specify structs for that data.  If no struct is
+ * return response data specify structures for that data.  If no structure is
  * specified, the command does not input or output data, respectively.
  * Parameter/response length is implicit in the structs.  Some underlying
  * communication protocols (I2C, SPI) may add length or checksum headers, but
@@ -684,7 +687,7 @@ struct ec_response_get_cmd_versions {
 } __packed;
 
 /*
- * Check EC communcations status (busy). This is needed on i2c/spi but not
+ * Check EC communications status (busy). This is needed on i2c/spi but not
  * on lpc since it has its own out-of-band busy indicator.
  *
  * lpc must read the status from the command register. Attempting this on
@@ -721,7 +724,7 @@ struct ec_response_test_protocol {
 	uint8_t buf[32];
 } __packed;
 
-/* Get prococol information */
+/* Get protocol information */
 #define EC_CMD_GET_PROTOCOL_INFO	0x0b
 
 /* Flags for ec_response_get_protocol_info.flags */
@@ -767,7 +770,7 @@ struct ec_response_get_set_value {
 	uint32_t value;
 } __packed;
 
-/* More than one command can use these structs to get/set paramters. */
+/* More than one command can use these structs to get/set parameters. */
 #define EC_CMD_GSV_PAUSE_IN_S5	0x0c
 
 /*****************************************************************************/
@@ -835,7 +838,7 @@ enum ec_feature_code {
 	 * (Common Smart Battery System Interface Specification)
 	 */
 	EC_FEATURE_SMART_BATTERY = 18,
-	/* EC can dectect when the host hangs. */
+	/* EC can detect when the host hangs. */
 	EC_FEATURE_HANG_DETECT = 19,
 	/* Report power information, for pit only */
 	EC_FEATURE_PMU = 20,
@@ -887,8 +890,10 @@ struct ec_response_flash_info {
 	uint32_t protect_block_size;
 } __packed;
 
-/* Flags for version 1+ flash info command */
-/* EC flash erases bits to 0 instead of 1 */
+/*
+ * Flags for version 1+ flash info command
+ * EC flash erases bits to 0 instead of 1.
+ */
 #define EC_FLASH_INFO_ERASE_TO_0 (1 << 0)
 
 /**
@@ -911,7 +916,8 @@ struct ec_response_flash_info {
  * fields following.
  *
  * gcc anonymous structs don't seem to get along with the __packed directive;
- * if they did we'd define the version 0 struct as a sub-struct of this one.
+ * if they did we'd define the version 0 structure as a sub-structure of this
+ * one.
  */
 struct ec_response_flash_info_1 {
 	/* Version 0 fields; see above for description */
@@ -1006,7 +1012,7 @@ struct ec_params_flash_erase {
  * re-requesting the desired flags, or by a hard reset if that fails.
  */
 #define EC_FLASH_PROTECT_ERROR_INCONSISTENT (1 << 5)
-/* Entile flash code protected when the EC boots */
+/* Entire flash code protected when the EC boots */
 #define EC_FLASH_PROTECT_ALL_AT_BOOT        (1 << 6)
 
 /**
@@ -1599,7 +1605,7 @@ struct ec_response_motion_sensor_data {
 	union {
 		int16_t             data[3];
 		struct {
-			uint16_t    rsvd;
+			uint16_t    reserved;
 			uint32_t    timestamp;
 		} __packed;
 		struct {
@@ -1798,7 +1804,7 @@ struct ec_response_rtc {
 #define EC_CMD_RTC_SET_VALUE 0x46
 #define EC_CMD_RTC_SET_ALARM 0x47
 
-/* Pass as param to SET_ALARM to clear the current alarm */
+/* Pass as time param to SET_ALARM to clear the current alarm */
 #define EC_RTC_ALARM_CLEAR 0
 
 /*****************************************************************************/
@@ -1884,7 +1890,8 @@ enum ec_temp_thresholds {
 	EC_TEMP_THRESH_COUNT
 };
 
-/* Thermal configuration for one temperature sensor. Temps are in degrees K.
+/*
+ * Thermal configuration for one temperature sensor. Temps are in degrees K.
  * Zero values will be silently ignored by the thermal task.
  */
 struct ec_thermal_config {
@@ -1899,8 +1906,10 @@ struct ec_params_thermal_get_threshold_v1 {
 } __packed;
 /* This returns a struct ec_thermal_config */
 
-/* Version 1 - set config for one sensor.
- * Use read-modify-write for best results! */
+/*
+ * Version 1 - set config for one sensor.
+ * Use read-modify-write for best results!
+ */
 struct ec_params_thermal_set_threshold_v1 {
 	uint32_t sensor_num;
 	struct ec_thermal_config cfg;
@@ -2049,7 +2058,12 @@ enum mkbp_config_valid {
 	EC_MKBP_VALID_FIFO_MAX_DEPTH		= 1 << 7,
 };
 
-/* Configuration for our key scanning algorithm */
+/*
+ * Configuration for our key scanning algorithm.
+ *
+ * Note that this is used as a sub-structure of
+ * ec_{params/response}_mkbp_get_config.
+ */
 struct ec_mkbp_config {
 	uint32_t valid_mask;		/* valid fields */
 	uint8_t flags;		/* some flags (enum mkbp_config_flags) */
@@ -2332,6 +2346,7 @@ struct ec_params_gpio_set {
 struct ec_params_gpio_get {
 	char name[32];
 } __packed;
+
 struct ec_response_gpio_get {
 	uint8_t val;
 } __packed;
@@ -2372,8 +2387,10 @@ enum gpio_get_subcmd {
 /* I2C commands. Only available when flash write protect is unlocked. */
 
 /*
- * TODO(crosbug.com/p/23570): These commands are deprecated, and will be
- * removed soon.  Use EC_CMD_I2C_XFER instead.
+ * CAUTION: These commands are deprecated, and are not supported anymore in EC
+ * builds >= 8398.0.0 (see crosbug.com/p/23570).
+ *
+ * Use EC_CMD_I2C_PASSTHRU instead.
  */
 
 /* Read I2C bus */
@@ -2385,6 +2402,7 @@ struct ec_params_i2c_read {
 	uint8_t port;
 	uint8_t offset;
 } __packed;
+
 struct ec_response_i2c_read {
 	uint16_t data;
 } __packed;
@@ -2420,7 +2438,6 @@ struct ec_params_charge_control {
 } __packed;
 
 /*****************************************************************************/
-/* Console commands. Only available when flash write protect is unlocked. */
 
 /* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */
 #define EC_CMD_CONSOLE_SNAPSHOT 0x97
@@ -2817,9 +2834,7 @@ enum ec_i2s_config {
 };
 
 struct ec_param_codec_i2s {
-	/*
-	 * enum ec_codec_i2s_subcmd
-	 */
+	/* enum ec_codec_i2s_subcmd */
 	uint8_t cmd;
 	union {
 		/*
@@ -2894,7 +2909,7 @@ struct ec_response_codec_gain {
 enum ec_reboot_cmd {
 	EC_REBOOT_CANCEL = 0,        /* Cancel a pending reboot */
 	EC_REBOOT_JUMP_RO = 1,       /* Jump to RO without rebooting */
-	EC_REBOOT_JUMP_RW = 2,       /* Jump to RW without rebooting */
+	EC_REBOOT_JUMP_RW = 2,       /* Jump to active RW without rebooting */
 	/* (command 3 was jump to RW-B) */
 	EC_REBOOT_COLD = 4,          /* Cold-reboot */
 	EC_REBOOT_DISABLE_JUMP = 5,  /* Disable jump until next reboot */
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 04/30] mfd: cros_ec: add ec_align macros
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (2 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 03/30] mfd: cros_ec: set comments properly Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 05/30] mfd: cros_ec: Define commands as 4-digit UPPER CASE hex values Gwendal Grignou
                   ` (26 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

To reduce code and improve performance of the embedded controller
firmware, pragma __aligned(2) or __aligned(4) are used when alignment to
16 or 32 bit boundary is expected.

Define all ec_align to packed when compiling kernel.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 438 +++++++++++++++------------
 1 file changed, 236 insertions(+), 202 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 43fe1697b18b..e0f6e9d9f587 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -188,12 +188,46 @@
 #ifndef __ACPI__
 
 /*
- * Define __packed if someone hasn't beat us to it.  Linux kernel style
- * checking prefers __packed over __attribute__((packed)).
+ * Attributes for EC request and response packets.  Just defining __packed
+ * results in inefficient assembly code on ARM, if the structure is actually
+ * 32-bit aligned, as it should be for all buffers.
+ *
+ * Be very careful when adding these to existing structures.  They will round
+ * up the structure size to the specified boundary.
+ *
+ * Also be very careful to make that if a structure is included in some other
+ * parent structure that the alignment will still be true given the packing of
+ * the parent structure.  This is particularly important if the sub-structure
+ * will be passed as a pointer to another function, since that function will
+ * not know about the misaligment caused by the parent structure's packing.
+ *
+ * Also be very careful using __packed - particularly when nesting non-packed
+ * structures inside packed ones.  In fact, DO NOT use __packed directly;
+ * always use one of these attributes.
+ *
+ * Once everything is annotated properly, the following search strings should
+ * not return ANY matches in this file other than right here:
+ *
+ * "__packed" - generates inefficient code; all sub-structs must also be packed
+ *
+ * "struct [^_]" - all structs should be annotated, except for structs that are
+ * members of other structs/unions (and their original declarations should be
+ * annotated).
  */
-#ifndef __packed
-#define __packed __attribute__((packed))
-#endif
+
+/*
+ * Packed structures make no assumption about alignment, so they do inefficient
+ * byte-wise reads.
+ */
+#define __ec_align1 __packed
+#define __ec_align2 __packed
+#define __ec_align4 __packed
+#define __ec_align_size1 __packed
+#define __ec_align_offset1 __packed
+#define __ec_align_offset2 __packed
+#define __ec_todo_packed __packed
+#define __ec_todo_unpacked
+
 
 /* LPC command status byte masks */
 /* EC has written a byte in the data register and host hasn't read it yet */
@@ -317,7 +351,7 @@ struct ec_lpc_host_args {
 	uint8_t command_version;
 	uint8_t data_size;
 	uint8_t checksum;
-} __packed;
+} __ec_align4;
 
 /* Flags for ec_lpc_host_args.flags */
 /*
@@ -488,7 +522,7 @@ struct ec_host_request {
 	uint8_t command_version;
 	uint8_t reserved;
 	uint16_t data_len;
-} __packed;
+} __ec_align4;
 
 #define EC_HOST_RESPONSE_VERSION 3
 
@@ -507,7 +541,7 @@ struct ec_host_response {
 	uint16_t result;
 	uint16_t data_len;
 	uint16_t reserved;
-} __packed;
+} __ec_align4;
 
 /*****************************************************************************/
 /*
@@ -536,7 +570,7 @@ struct ec_host_response {
  */
 struct ec_response_proto_version {
 	uint32_t version;
-} __packed;
+} __ec_align4;
 
 /*
  * Hello.  This is a simple command to test the EC is responsive to
@@ -550,7 +584,7 @@ struct ec_response_proto_version {
  */
 struct ec_params_hello {
 	uint32_t in_data;
-} __packed;
+} __ec_align4;
 
 /**
  * struct ec_response_hello - Response to the hello command.
@@ -558,7 +592,7 @@ struct ec_params_hello {
  */
 struct ec_response_hello {
 	uint32_t out_data;
-} __packed;
+} __ec_align4;
 
 /* Get version number */
 #define EC_CMD_GET_VERSION 0x02
@@ -581,7 +615,7 @@ struct ec_response_get_version {
 	char version_string_rw[32];
 	char reserved[32];
 	uint32_t current_image;
-} __packed;
+} __ec_align4;
 
 /* Read test */
 #define EC_CMD_READ_TEST 0x03
@@ -594,7 +628,7 @@ struct ec_response_get_version {
 struct ec_params_read_test {
 	uint32_t offset;
 	uint32_t size;
-} __packed;
+} __ec_align4;
 
 /**
  * struct ec_response_read_test - Response to the read test command.
@@ -602,7 +636,7 @@ struct ec_params_read_test {
  */
 struct ec_response_read_test {
 	uint32_t data[32];
-} __packed;
+} __ec_align4;
 
 /*
  * Get build information
@@ -624,7 +658,7 @@ struct ec_response_get_chip_info {
 	char vendor[32];
 	char name[32];
 	char revision[32];
-} __packed;
+} __ec_align4;
 
 /* Get board HW version */
 #define EC_CMD_GET_BOARD_VERSION 0x06
@@ -635,7 +669,7 @@ struct ec_response_get_chip_info {
  */
 struct ec_response_board_version {
 	uint16_t board_version;
-} __packed;
+} __ec_align2;
 
 /*
  * Read memory-mapped data.
@@ -655,7 +689,7 @@ struct ec_response_board_version {
 struct ec_params_read_memmap {
 	uint8_t offset;
 	uint8_t size;
-} __packed;
+} __ec_align1;
 
 /* Read versions supported for a command */
 #define EC_CMD_GET_CMD_VERSIONS 0x08
@@ -666,7 +700,7 @@ struct ec_params_read_memmap {
  */
 struct ec_params_get_cmd_versions {
 	uint8_t cmd;
-} __packed;
+} __ec_align1;
 
 /**
  * struct ec_params_get_cmd_versions_v1 - Parameters for the get command
@@ -675,7 +709,7 @@ struct ec_params_get_cmd_versions {
  */
 struct ec_params_get_cmd_versions_v1 {
 	uint16_t cmd;
-} __packed;
+} __ec_align2;
 
 /**
  * struct ec_response_get_cmd_version - Response to the get command versions.
@@ -684,7 +718,7 @@ struct ec_params_get_cmd_versions_v1 {
  */
 struct ec_response_get_cmd_versions {
 	uint32_t version_mask;
-} __packed;
+} __ec_align4;
 
 /*
  * Check EC communications status (busy). This is needed on i2c/spi but not
@@ -707,7 +741,7 @@ enum ec_comms_status {
  */
 struct ec_response_get_comms_status {
 	uint32_t flags;		/* Mask of enum ec_comms_status */
-} __packed;
+} __ec_align4;
 
 /* Fake a variety of responses, purely for testing purposes. */
 #define EC_CMD_TEST_PROTOCOL		0x0a
@@ -717,12 +751,12 @@ struct ec_params_test_protocol {
 	uint32_t ec_result;
 	uint32_t ret_len;
 	uint8_t buf[32];
-} __packed;
+} __ec_align4;
 
 /* Here it comes... */
 struct ec_response_test_protocol {
 	uint8_t buf[32];
-} __packed;
+} __ec_align4;
 
 /* Get protocol information */
 #define EC_CMD_GET_PROTOCOL_INFO	0x0b
@@ -745,7 +779,7 @@ struct ec_response_get_protocol_info {
 	uint16_t max_request_packet_size;
 	uint16_t max_response_packet_size;
 	uint32_t flags;
-} __packed;
+} __ec_align4;
 
 
 /*****************************************************************************/
@@ -763,12 +797,12 @@ struct ec_response_get_protocol_info {
 struct ec_params_get_set_value {
 	uint32_t flags;
 	uint32_t value;
-} __packed;
+} __ec_align4;
 
 struct ec_response_get_set_value {
 	uint32_t flags;
 	uint32_t value;
-} __packed;
+} __ec_align4;
 
 /* More than one command can use these structs to get/set parameters. */
 #define EC_CMD_GSV_PAUSE_IN_S5	0x0c
@@ -863,7 +897,7 @@ enum ec_feature_code {
 
 struct ec_response_get_features {
 	uint32_t flags[2];
-} __packed;
+} __ec_align4;
 
 /*****************************************************************************/
 /* Flash commands */
@@ -888,7 +922,7 @@ struct ec_response_flash_info {
 	uint32_t write_block_size;
 	uint32_t erase_block_size;
 	uint32_t protect_block_size;
-} __packed;
+} __ec_align4;
 
 /*
  * Flags for version 1+ flash info command
@@ -929,7 +963,7 @@ struct ec_response_flash_info_1 {
 	/* Version 1 adds these fields: */
 	uint32_t write_ideal_size;
 	uint32_t flags;
-} __packed;
+} __ec_align4;
 
 /*
  * Read flash
@@ -946,7 +980,7 @@ struct ec_response_flash_info_1 {
 struct ec_params_flash_read {
 	uint32_t offset;
 	uint32_t size;
-} __packed;
+} __ec_align4;
 
 /* Write flash */
 #define EC_CMD_FLASH_WRITE 0x12
@@ -964,7 +998,7 @@ struct ec_params_flash_write {
 	uint32_t offset;
 	uint32_t size;
 	/* Followed by data to write */
-} __packed;
+} __ec_align4;
 
 /* Erase flash */
 #define EC_CMD_FLASH_ERASE 0x13
@@ -977,7 +1011,7 @@ struct ec_params_flash_write {
 struct ec_params_flash_erase {
 	uint32_t offset;
 	uint32_t size;
-} __packed;
+} __ec_align4;
 
 /*
  * Get/set flash protection.
@@ -1023,7 +1057,7 @@ struct ec_params_flash_erase {
 struct ec_params_flash_protect {
 	uint32_t mask;
 	uint32_t flags;
-} __packed;
+} __ec_align4;
 
 /**
  * struct ec_response_flash_protect - Response to the flash protect command.
@@ -1038,7 +1072,7 @@ struct ec_response_flash_protect {
 	uint32_t flags;
 	uint32_t valid_flags;
 	uint32_t writable_flags;
-} __packed;
+} __ec_align4;
 
 /*
  * Note: commands 0x14 - 0x19 version 0 were old commands to get/set flash
@@ -1070,12 +1104,12 @@ enum ec_flash_region {
  */
 struct ec_params_flash_region_info {
 	uint32_t region;
-} __packed;
+} __ec_align4;
 
 struct ec_response_flash_region_info {
 	uint32_t offset;
 	uint32_t size;
-} __packed;
+} __ec_align4;
 
 /* Read/write VbNvContext */
 #define EC_CMD_VBNV_CONTEXT 0x17
@@ -1090,11 +1124,11 @@ enum ec_vbnvcontext_op {
 struct ec_params_vbnvcontext {
 	uint32_t op;
 	uint8_t block[EC_VBNV_BLOCK_SIZE];
-} __packed;
+} __ec_align4;
 
 struct ec_response_vbnvcontext {
 	uint8_t block[EC_VBNV_BLOCK_SIZE];
-} __packed;
+} __ec_align4;
 
 /*****************************************************************************/
 /* PWM commands */
@@ -1104,14 +1138,14 @@ struct ec_response_vbnvcontext {
 
 struct ec_response_pwm_get_fan_rpm {
 	uint32_t rpm;
-} __packed;
+} __ec_align4;
 
 /* Set target fan RPM */
-#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x21
+#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x0021
 
 struct ec_params_pwm_set_fan_target_rpm {
 	uint32_t rpm;
-} __packed;
+} __ec_align_size1;
 
 /* Get keyboard backlight */
 #define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x22
@@ -1119,21 +1153,21 @@ struct ec_params_pwm_set_fan_target_rpm {
 struct ec_response_pwm_get_keyboard_backlight {
 	uint8_t percent;
 	uint8_t enabled;
-} __packed;
+} __ec_align1;
 
 /* Set keyboard backlight */
 #define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x23
 
 struct ec_params_pwm_set_keyboard_backlight {
 	uint8_t percent;
-} __packed;
+} __ec_align1;
 
 /* Set target fan PWM duty cycle */
 #define EC_CMD_PWM_SET_FAN_DUTY 0x24
 
 struct ec_params_pwm_set_fan_duty {
 	uint32_t percent;
-} __packed;
+} __ec_align4;
 
 #define EC_CMD_PWM_SET_DUTY 0x25
 /* 16 bit duty cycle, 0xffff = 100% */
@@ -1153,18 +1187,18 @@ struct ec_params_pwm_set_duty {
 	uint16_t duty;     /* Duty cycle, EC_PWM_MAX_DUTY = 100% */
 	uint8_t pwm_type;  /* ec_pwm_type */
 	uint8_t index;     /* Type-specific index, or 0 if unique */
-} __packed;
+} __ec_align4;
 
 #define EC_CMD_PWM_GET_DUTY 0x26
 
 struct ec_params_pwm_get_duty {
 	uint8_t pwm_type;  /* ec_pwm_type */
 	uint8_t index;     /* Type-specific index, or 0 if unique */
-} __packed;
+} __ec_align1;
 
 struct ec_response_pwm_get_duty {
 	uint16_t duty;     /* Duty cycle, EC_PWM_MAX_DUTY = 100% */
-} __packed;
+} __ec_align2;
 
 /*****************************************************************************/
 /*
@@ -1177,7 +1211,7 @@ struct ec_response_pwm_get_duty {
 
 struct rgb_s {
 	uint8_t r, g, b;
-};
+} __ec_todo_unpacked;
 
 #define LB_BATTERY_LEVELS 4
 
@@ -1217,7 +1251,7 @@ struct lightbar_params_v0 {
 
 	/* Color palette */
 	struct rgb_s color[8];			/* 0-3 are Google colors */
-} __packed;
+} __ec_todo_packed;
 
 struct lightbar_params_v1 {
 	/* Timing */
@@ -1260,14 +1294,14 @@ struct lightbar_params_v1 {
 
 	/* Color palette */
 	struct rgb_s color[8];			/* 0-3 are Google colors */
-} __packed;
+} __ec_todo_packed;
 
 /* Lightbar program */
 #define EC_LB_PROG_LEN 192
 struct lightbar_program {
 	uint8_t size;
 	uint8_t data[EC_LB_PROG_LEN];
-};
+} __ec_todo_unpacked;
 
 struct ec_params_lightbar {
 	uint8_t cmd;		      /* Command (see enum lightbar_command) */
@@ -1277,23 +1311,23 @@ struct ec_params_lightbar {
 		} dump, off, on, init, get_seq, get_params_v0, get_params_v1,
 			version, get_brightness, get_demo, suspend, resume;
 
-		struct {
+		struct __ec_todo_unpacked {
 			uint8_t num;
 		} set_brightness, seq, demo;
 
-		struct {
+		struct __ec_todo_unpacked {
 			uint8_t ctrl, reg, value;
 		} reg;
 
-		struct {
+		struct __ec_todo_unpacked {
 			uint8_t led, red, green, blue;
 		} set_rgb;
 
-		struct {
+		struct __ec_todo_unpacked {
 			uint8_t led;
 		} get_rgb;
 
-		struct {
+		struct __ec_todo_unpacked {
 			uint8_t enable;
 		} manual_suspend_ctrl;
 
@@ -1301,31 +1335,31 @@ struct ec_params_lightbar {
 		struct lightbar_params_v1 set_params_v1;
 		struct lightbar_program set_program;
 	};
-} __packed;
+} __ec_todo_packed;
 
 struct ec_response_lightbar {
 	union {
-		struct {
-			struct {
+		struct __ec_todo_unpacked {
+			struct __ec_todo_unpacked {
 				uint8_t reg;
 				uint8_t ic0;
 				uint8_t ic1;
 			} vals[23];
 		} dump;
 
-		struct  {
+		struct __ec_todo_unpacked {
 			uint8_t num;
 		} get_seq, get_brightness, get_demo;
 
 		struct lightbar_params_v0 get_params_v0;
 		struct lightbar_params_v1 get_params_v1;
 
-		struct {
+		struct __ec_todo_unpacked {
 			uint32_t num;
 			uint32_t flags;
 		} version;
 
-		struct {
+		struct __ec_todo_unpacked {
 			uint8_t red, green, blue;
 		} get_rgb;
 
@@ -1335,7 +1369,7 @@ struct ec_response_lightbar {
 			demo, set_params_v0, set_params_v1,
 			set_program, manual_suspend_ctrl, suspend, resume;
 	};
-} __packed;
+} __ec_todo_packed;
 
 /* Lightbar commands */
 enum lightbar_command {
@@ -1402,7 +1436,7 @@ struct ec_params_led_control {
 	uint8_t flags;      /* Control flags */
 
 	uint8_t brightness[EC_LED_COLOR_COUNT];
-} __packed;
+} __ec_align1;
 
 struct ec_response_led_control {
 	/*
@@ -1413,7 +1447,7 @@ struct ec_response_led_control {
 	 * Other values means the LED is control by PWM.
 	 */
 	uint8_t brightness_range[EC_LED_COLOR_COUNT];
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /* Verified boot commands */
@@ -1434,7 +1468,7 @@ struct ec_params_vboot_hash {
 	uint32_t offset;         /* Offset in flash to hash */
 	uint32_t size;           /* Number of bytes to hash */
 	uint8_t nonce_data[64];  /* Nonce data; ignored if nonce_size=0 */
-} __packed;
+} __ec_align4;
 
 struct ec_response_vboot_hash {
 	uint8_t status;          /* enum ec_vboot_hash_status */
@@ -1444,7 +1478,7 @@ struct ec_response_vboot_hash {
 	uint32_t offset;         /* Offset in flash which was hashed */
 	uint32_t size;           /* Number of bytes hashed */
 	uint8_t hash_digest[64]; /* Hash digest data */
-} __packed;
+} __ec_align4;
 
 enum ec_vboot_hash_cmd {
 	EC_VBOOT_HASH_GET = 0,       /* Get current hash status */
@@ -1604,23 +1638,23 @@ struct ec_response_motion_sensor_data {
 	/* Each sensor is up to 3-axis. */
 	union {
 		int16_t             data[3];
-		struct {
+		struct __ec_todo_packed {
 			uint16_t    reserved;
 			uint32_t    timestamp;
-		} __packed;
-		struct {
+		};
+		struct __ec_todo_unpacked {
 			uint8_t     activity; /* motionsensor_activity */
 			uint8_t     state;
 			int16_t     add_info[2];
 		};
 	};
-} __packed;
+} __ec_todo_packed;
 
 struct ec_params_motion_sense {
 	uint8_t cmd;
 	union {
 		/* Used for MOTIONSENSE_CMD_DUMP. */
-		struct {
+		struct __ec_todo_unpacked {
 			/* no args */
 		} dump;
 
@@ -1628,13 +1662,13 @@ struct ec_params_motion_sense {
 		 * Used for MOTIONSENSE_CMD_EC_RATE and
 		 * MOTIONSENSE_CMD_KB_WAKE_ANGLE.
 		 */
-		struct {
+		struct __ec_todo_unpacked {
 			/* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */
 			int16_t data;
 		} ec_rate, kb_wake_angle;
 
 		/* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */
-		struct {
+		struct __ec_todo_packed {
 			uint8_t sensor_num;
 
 			/*
@@ -1660,10 +1694,10 @@ struct ec_params_motion_sense {
 			 * Compass:       1/16 uT
 			 */
 			int16_t offset[3];
-		} __packed sensor_offset;
+		} sensor_offset;
 
 		/* Used for MOTIONSENSE_CMD_INFO. */
-		struct {
+		struct __ec_todo_packed {
 			uint8_t sensor_num;
 		} info;
 
@@ -1684,12 +1718,12 @@ struct ec_params_motion_sense {
 			int32_t data;
 		} sensor_odr, sensor_range;
 	};
-} __packed;
+} __ec_todo_packed;
 
 struct ec_response_motion_sense {
 	union {
 		/* Used for MOTIONSENSE_CMD_DUMP. */
-		struct {
+		struct __ec_todo_unpacked {
 			/* Flags representing the motion sensor module. */
 			uint8_t module_flags;
 
@@ -1704,7 +1738,7 @@ struct ec_response_motion_sense {
 		} dump;
 
 		/* Used for MOTIONSENSE_CMD_INFO. */
-		struct {
+		struct __ec_todo_unpacked {
 			/* Should be element of enum motionsensor_type. */
 			uint8_t type;
 
@@ -1723,18 +1757,18 @@ struct ec_response_motion_sense {
 		 * MOTIONSENSE_CMD_SENSOR_RANGE, and
 		 * MOTIONSENSE_CMD_KB_WAKE_ANGLE.
 		 */
-		struct {
+		struct __ec_todo_unpacked {
 			/* Current value of the parameter queried. */
 			int32_t ret;
 		} ec_rate, sensor_odr, sensor_range, kb_wake_angle;
 
 		/* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */
-		struct {
+		struct __ec_todo_unpacked  {
 			int16_t temp;
 			int16_t offset[3];
 		} sensor_offset, perform_calib;
 	};
-} __packed;
+} __ec_todo_packed;
 
 /*****************************************************************************/
 /* USB charging control commands */
@@ -1745,7 +1779,7 @@ struct ec_response_motion_sense {
 struct ec_params_usb_charge_set_mode {
 	uint8_t usb_port_id;
 	uint8_t mode;
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /* Persistent storage for host */
@@ -1761,7 +1795,7 @@ struct ec_response_pstore_info {
 	uint32_t pstore_size;
 	/* Access size; read/write offset and size must be a multiple of this */
 	uint32_t access_size;
-} __packed;
+} __ec_align4;
 
 /*
  * Read persistent storage
@@ -1773,7 +1807,7 @@ struct ec_response_pstore_info {
 struct ec_params_pstore_read {
 	uint32_t offset;   /* Byte offset to read */
 	uint32_t size;     /* Size to read in bytes */
-} __packed;
+} __ec_align4;
 
 /* Write persistent storage */
 #define EC_CMD_PSTORE_WRITE 0x42
@@ -1782,7 +1816,7 @@ struct ec_params_pstore_write {
 	uint32_t offset;   /* Byte offset to write */
 	uint32_t size;     /* Size to write in bytes */
 	uint8_t data[EC_PSTORE_SIZE_MAX];
-} __packed;
+} __ec_align4;
 
 /*****************************************************************************/
 /* Real-time clock */
@@ -1790,11 +1824,11 @@ struct ec_params_pstore_write {
 /* RTC params and response structures */
 struct ec_params_rtc {
 	uint32_t time;
-} __packed;
+} __ec_align4;
 
 struct ec_response_rtc {
 	uint32_t time;
-} __packed;
+} __ec_align4;
 
 /* These use ec_response_rtc */
 #define EC_CMD_RTC_GET_VALUE 0x44
@@ -1825,29 +1859,29 @@ enum ec_port80_subcmd {
 struct ec_params_port80_read {
 	uint16_t subcmd;
 	union {
-		struct {
+		struct __ec_todo_unpacked {
 			uint32_t offset;
 			uint32_t num_entries;
 		} read_buffer;
 	};
-} __packed;
+} __ec_todo_packed;
 
 struct ec_response_port80_read {
 	union {
-		struct {
+		struct __ec_todo_unpacked {
 			uint32_t writes;
 			uint32_t history_size;
 			uint32_t last_boot;
 		} get_info;
-		struct {
+		struct __ec_todo_unpacked {
 			uint16_t codes[EC_PORT80_SIZE_MAX];
 		} data;
 	};
-} __packed;
+} __ec_todo_packed;
 
 struct ec_response_port80_last_boot {
 	uint16_t code;
-} __packed;
+} __ec_align2;
 
 /*****************************************************************************/
 /* Thermal engine commands. Note that there are two implementations. We'll
@@ -1868,17 +1902,17 @@ struct ec_params_thermal_set_threshold {
 	uint8_t sensor_type;
 	uint8_t threshold_id;
 	uint16_t value;
-} __packed;
+} __ec_align2;
 
 /* Version 0 - get */
 struct ec_params_thermal_get_threshold {
 	uint8_t sensor_type;
 	uint8_t threshold_id;
-} __packed;
+} __ec_align1;
 
 struct ec_response_thermal_get_threshold {
 	uint16_t value;
-} __packed;
+} __ec_align2;
 
 
 /* The version 1 structs are visible. */
@@ -1898,12 +1932,12 @@ struct ec_thermal_config {
 	uint32_t temp_host[EC_TEMP_THRESH_COUNT]; /* levels of hotness */
 	uint32_t temp_fan_off;		/* no active cooling needed */
 	uint32_t temp_fan_max;		/* max active cooling needed */
-} __packed;
+} __ec_align4;
 
 /* Version 1 - get config for one sensor. */
 struct ec_params_thermal_get_threshold_v1 {
 	uint32_t sensor_num;
-} __packed;
+} __ec_align4;
 /* This returns a struct ec_thermal_config */
 
 /*
@@ -1913,7 +1947,7 @@ struct ec_params_thermal_get_threshold_v1 {
 struct ec_params_thermal_set_threshold_v1 {
 	uint32_t sensor_num;
 	struct ec_thermal_config cfg;
-} __packed;
+} __ec_align4;
 /* This returns no data */
 
 /****************************************************************************/
@@ -1926,14 +1960,14 @@ struct ec_params_thermal_set_threshold_v1 {
 
 struct ec_params_tmp006_get_calibration {
 	uint8_t index;
-} __packed;
+} __ec_align1;
 
 struct ec_response_tmp006_get_calibration {
 	float s0;
 	float b0;
 	float b1;
 	float b2;
-} __packed;
+} __ec_align4;
 
 /* Set TMP006 calibration data */
 #define EC_CMD_TMP006_SET_CALIBRATION 0x54
@@ -1945,19 +1979,19 @@ struct ec_params_tmp006_set_calibration {
 	float b0;
 	float b1;
 	float b2;
-} __packed;
+} __ec_align4;
 
 /* Read raw TMP006 data */
 #define EC_CMD_TMP006_GET_RAW 0x55
 
 struct ec_params_tmp006_get_raw {
 	uint8_t index;
-} __packed;
+} __ec_align1;
 
 struct ec_response_tmp006_get_raw {
 	int32_t t;  /* In 1/100 K */
 	int32_t v;  /* In nV */
-};
+} __ec_align4;
 
 /*****************************************************************************/
 /* MKBP - Matrix KeyBoard Protocol */
@@ -1984,12 +2018,12 @@ struct ec_response_mkbp_info {
 	uint32_t cols;
 	/* Formerly "switches", which was 0. */
 	uint8_t reserved;
-} __packed;
+} __ec_align_size1;
 
 struct ec_params_mkbp_info {
 	uint8_t info_type;
 	uint8_t event_type;
-} __packed;
+} __ec_align1;
 
 enum ec_mkbp_info_type {
 	/*
@@ -2037,7 +2071,7 @@ struct ec_params_mkbp_simulate_key {
 	uint8_t col;
 	uint8_t row;
 	uint8_t pressed;
-} __packed;
+} __ec_align1;
 
 /* Configure keyboard scanning */
 #define EC_CMD_MKBP_SET_CONFIG 0x64
@@ -2083,15 +2117,15 @@ struct ec_mkbp_config {
 	uint16_t debounce_up_us;	/* time for debounce on key up */
 	/* maximum depth to allow for fifo (0 = no keyscan output) */
 	uint8_t fifo_max_depth;
-} __packed;
+} __ec_align_size1;
 
 struct ec_params_mkbp_set_config {
 	struct ec_mkbp_config config;
-} __packed;
+} __ec_align_size1;
 
 struct ec_response_mkbp_get_config {
 	struct ec_mkbp_config config;
-} __packed;
+} __ec_align_size1;
 
 /* Run the key scan emulation */
 #define EC_CMD_KEYSCAN_SEQ_CTRL 0x66
@@ -2114,18 +2148,18 @@ enum ec_collect_flags {
 
 struct ec_collect_item {
 	uint8_t flags;		/* some flags (enum ec_collect_flags) */
-};
+} __ec_align1;
 
 struct ec_params_keyscan_seq_ctrl {
 	uint8_t cmd;	/* Command to send (enum ec_keyscan_seq_cmd) */
 	union {
-		struct {
+		struct __ec_align1 {
 			uint8_t active;		/* still active */
 			uint8_t num_items;	/* number of items */
 			/* Current item being presented */
 			uint8_t cur_item;
 		} status;
-		struct {
+		struct __ec_todo_unpacked {
 			/*
 			 * Absolute time for this scan, measured from the
 			 * start of the sequence.
@@ -2133,22 +2167,22 @@ struct ec_params_keyscan_seq_ctrl {
 			uint32_t time_us;
 			uint8_t scan[0];	/* keyscan data */
 		} add;
-		struct {
+		struct __ec_align1 {
 			uint8_t start_item;	/* First item to return */
 			uint8_t num_items;	/* Number of items to return */
 		} collect;
 	};
-} __packed;
+} __ec_todo_packed;
 
 struct ec_result_keyscan_seq_ctrl {
 	union {
-		struct {
+		struct __ec_todo_unpacked {
 			uint8_t num_items;	/* Number of items */
 			/* Data for each item */
 			struct ec_collect_item item[0];
 		} collect;
 	};
-} __packed;
+} __ec_todo_packed;
 
 /*
  * Command for retrieving the next pending MKBP event from the EC device
@@ -2186,8 +2220,8 @@ enum ec_mkbp_event {
 	EC_MKBP_EVENT_COUNT,
 };
 
-union ec_response_get_next_data {
-	uint8_t   key_matrix[13];
+union __ec_align_offset1 ec_response_get_next_data {
+	uint8_t key_matrix[13];
 
 	/* Unaligned */
 	uint32_t  host_event;
@@ -2195,9 +2229,9 @@ union ec_response_get_next_data {
 	uint32_t   buttons;
 	uint32_t   switches;
 	uint32_t   sysrq;
-} __packed;
+};
 
-union ec_response_get_next_data_v1 {
+union __ec_align_offset1 ec_response_get_next_data_v1 {
 	uint8_t key_matrix[16];
 	uint32_t host_event;
 	uint32_t buttons;
@@ -2205,19 +2239,19 @@ union ec_response_get_next_data_v1 {
 	uint32_t sysrq;
 	uint32_t cec_events;
 	uint8_t cec_message[16];
-} __packed;
+};
 
 struct ec_response_get_next_event {
 	uint8_t event_type;
 	/* Followed by event data if any */
 	union ec_response_get_next_data data;
-} __packed;
+} __ec_align1;
 
 struct ec_response_get_next_event_v1 {
 	uint8_t event_type;
 	/* Followed by event data if any */
 	union ec_response_get_next_data_v1 data;
-} __packed;
+} __ec_align1;
 
 /* Bit indices for buttons and switches.*/
 /* Buttons */
@@ -2238,12 +2272,12 @@ struct ec_response_get_next_event_v1 {
 
 struct ec_params_temp_sensor_get_info {
 	uint8_t id;
-} __packed;
+} __ec_align1;
 
 struct ec_response_temp_sensor_get_info {
 	char sensor_name[32];
 	uint8_t sensor_type;
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 
@@ -2262,11 +2296,11 @@ struct ec_response_temp_sensor_get_info {
  */
 struct ec_params_host_event_mask {
 	uint32_t mask;
-} __packed;
+} __ec_align4;
 
 struct ec_response_host_event_mask {
 	uint32_t mask;
-} __packed;
+} __ec_align4;
 
 /* These all use ec_response_host_event_mask */
 #define EC_CMD_HOST_EVENT_GET_B         0x87
@@ -2289,7 +2323,7 @@ struct ec_response_host_event_mask {
 
 struct ec_params_switch_enable_backlight {
 	uint8_t enabled;
-} __packed;
+} __ec_align1;
 
 /* Enable/disable WLAN/Bluetooth */
 #define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91
@@ -2298,7 +2332,7 @@ struct ec_params_switch_enable_backlight {
 /* Version 0 params; no response */
 struct ec_params_switch_enable_wireless_v0 {
 	uint8_t enabled;
-} __packed;
+} __ec_align1;
 
 /* Version 1 params */
 struct ec_params_switch_enable_wireless_v1 {
@@ -2317,7 +2351,7 @@ struct ec_params_switch_enable_wireless_v1 {
 
 	/* Which flags to copy from suspend_flags */
 	uint8_t suspend_mask;
-} __packed;
+} __ec_align1;
 
 /* Version 1 response */
 struct ec_response_switch_enable_wireless_v1 {
@@ -2326,7 +2360,7 @@ struct ec_response_switch_enable_wireless_v1 {
 
 	/* Flags to leave enabled in S3 */
 	uint8_t suspend_flags;
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /* GPIO commands. Only available on EC if write protect has been disabled. */
@@ -2337,7 +2371,7 @@ struct ec_response_switch_enable_wireless_v1 {
 struct ec_params_gpio_set {
 	char name[32];
 	uint8_t val;
-} __packed;
+} __ec_align1;
 
 /* Get GPIO value */
 #define EC_CMD_GPIO_GET 0x93
@@ -2345,37 +2379,37 @@ struct ec_params_gpio_set {
 /* Version 0 of input params and response */
 struct ec_params_gpio_get {
 	char name[32];
-} __packed;
+} __ec_align1;
 
 struct ec_response_gpio_get {
 	uint8_t val;
-} __packed;
+} __ec_align1;
 
 /* Version 1 of input params and response */
 struct ec_params_gpio_get_v1 {
 	uint8_t subcmd;
 	union {
-		struct {
+		struct __ec_align1 {
 			char name[32];
 		} get_value_by_name;
-		struct {
+		struct __ec_align1 {
 			uint8_t index;
 		} get_info;
 	};
-} __packed;
+} __ec_align1;
 
 struct ec_response_gpio_get_v1 {
 	union {
-		struct {
+		struct __ec_align1 {
 			uint8_t val;
 		} get_value_by_name, get_count;
-		struct {
+		struct __ec_todo_unpacked {
 			uint8_t val;
 			char name[32];
 			uint32_t flags;
 		} get_info;
 	};
-} __packed;
+} __ec_todo_packed;
 
 enum gpio_get_subcmd {
 	EC_GPIO_GET_BY_NAME = 0,
@@ -2401,11 +2435,11 @@ struct ec_params_i2c_read {
 	uint8_t read_size; /* Either 8 or 16. */
 	uint8_t port;
 	uint8_t offset;
-} __packed;
+} __ec_align_size1;
 
 struct ec_response_i2c_read {
 	uint16_t data;
-} __packed;
+} __ec_align2;
 
 /* Write I2C bus */
 #define EC_CMD_I2C_WRITE 0x95
@@ -2416,7 +2450,7 @@ struct ec_params_i2c_write {
 	uint8_t write_size; /* Either 8 or 16. */
 	uint8_t port;
 	uint8_t offset;
-} __packed;
+} __ec_align_size1;
 
 /*****************************************************************************/
 /* Charge state commands. Only available when flash write protect unlocked. */
@@ -2435,7 +2469,7 @@ enum ec_charge_control_mode {
 
 struct ec_params_charge_control {
 	uint32_t mode;  /* enum charge_control_mode */
-} __packed;
+} __ec_align4;
 
 /*****************************************************************************/
 
@@ -2463,7 +2497,7 @@ enum ec_console_read_subcmd {
 
 struct ec_params_console_read_v1 {
 	uint8_t subcmd; /* enum ec_console_read_subcmd */
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 
@@ -2481,7 +2515,7 @@ struct ec_params_console_read_v1 {
 
 struct ec_params_battery_cutoff {
 	uint8_t flags;
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /* USB port mux control. */
@@ -2493,7 +2527,7 @@ struct ec_params_battery_cutoff {
 
 struct ec_params_usb_mux {
 	uint8_t mux;
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /* LDOs / FETs control. */
@@ -2511,7 +2545,7 @@ enum ec_ldo_state {
 struct ec_params_ldo_set {
 	uint8_t index;
 	uint8_t state;
-} __packed;
+} __ec_align1;
 
 /*
  * Get LDO state.
@@ -2520,11 +2554,11 @@ struct ec_params_ldo_set {
 
 struct ec_params_ldo_get {
 	uint8_t index;
-} __packed;
+} __ec_align1;
 
 struct ec_response_ldo_get {
 	uint8_t state;
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /* Power info. */
@@ -2540,7 +2574,7 @@ struct ec_response_power_info {
 	uint16_t voltage_system;
 	uint16_t current_system;
 	uint16_t usb_current_limit;
-} __packed;
+} __ec_align4;
 
 /*****************************************************************************/
 /* I2C passthru command */
@@ -2562,20 +2596,20 @@ struct ec_response_power_info {
 struct ec_params_i2c_passthru_msg {
 	uint16_t addr_flags;	/* I2C slave address (7 or 10 bits) and flags */
 	uint16_t len;		/* Number of bytes to read or write */
-} __packed;
+} __ec_align2;
 
 struct ec_params_i2c_passthru {
 	uint8_t port;		/* I2C port number */
 	uint8_t num_msgs;	/* Number of messages */
 	struct ec_params_i2c_passthru_msg msg[];
 	/* Data to write for all messages is concatenated here */
-} __packed;
+} __ec_align2;
 
 struct ec_response_i2c_passthru {
 	uint8_t i2c_status;	/* Status flags (EC_I2C_STATUS_...) */
 	uint8_t num_msgs;	/* Number of messages processed */
 	uint8_t data[];		/* Data read by messages concatenated here */
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /* Power button hang detect */
@@ -2630,7 +2664,7 @@ struct ec_params_hang_detect {
 
 	/* Timeout in msec before generating warm reboot, if enabled */
 	uint16_t warm_reboot_timeout_msec;
-} __packed;
+} __ec_align4;
 
 /*****************************************************************************/
 /* Commands for battery charging */
@@ -2676,20 +2710,20 @@ struct ec_params_charge_state {
 			/* no args */
 		} get_state;
 
-		struct {
+		struct __ec_todo_unpacked {
 			uint32_t param;		/* enum charge_state_param */
 		} get_param;
 
-		struct {
+		struct __ec_todo_unpacked {
 			uint32_t param;		/* param to set */
 			uint32_t value;		/* value to set */
 		} set_param;
 	};
-} __packed;
+} __ec_todo_packed;
 
 struct ec_response_charge_state {
 	union {
-		struct {
+		struct __ec_align4 {
 			int ac;
 			int chg_voltage;
 			int chg_current;
@@ -2697,14 +2731,14 @@ struct ec_response_charge_state {
 			int batt_state_of_charge;
 		} get_state;
 
-		struct {
+		struct __ec_align4 {
 			uint32_t value;
 		} get_param;
 		struct {
 			/* no return values */
 		} set_param;
 	};
-} __packed;
+} __ec_align4;
 
 
 /*
@@ -2714,7 +2748,7 @@ struct ec_response_charge_state {
 
 struct ec_params_current_limit {
 	uint32_t limit; /* in mA */
-} __packed;
+} __ec_align4;
 
 /*
  * Set maximum external voltage / current.
@@ -2725,7 +2759,7 @@ struct ec_params_current_limit {
 struct ec_params_external_power_limit_v1 {
 	uint16_t current_lim; /* in mA, or EC_POWER_LIMIT_NONE to clear limit */
 	uint16_t voltage_lim; /* in mV, or EC_POWER_LIMIT_NONE to clear limit */
-} __packed;
+} __ec_align2;
 
 #define EC_POWER_LIMIT_NONE 0xffff
 
@@ -2741,7 +2775,7 @@ enum host_sleep_event {
 
 struct ec_params_host_sleep_event {
 	uint8_t sleep_event;
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /* Smart battery pass-through */
@@ -2758,25 +2792,25 @@ struct ec_params_host_sleep_event {
 
 struct ec_params_sb_rd {
 	uint8_t reg;
-} __packed;
+} __ec_align1;
 
 struct ec_response_sb_rd_word {
 	uint16_t value;
-} __packed;
+} __ec_align2;
 
 struct ec_params_sb_wr_word {
 	uint8_t reg;
 	uint16_t value;
-} __packed;
+} __ec_align1;
 
 struct ec_response_sb_rd_block {
 	uint8_t data[32];
-} __packed;
+} __ec_align1;
 
 struct ec_params_sb_wr_block {
 	uint8_t reg;
 	uint16_t data[32];
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /* Battery vendor parameters
@@ -2798,11 +2832,11 @@ struct ec_params_battery_vendor_param {
 	uint32_t param;
 	uint32_t value;
 	uint8_t mode;
-} __packed;
+} __ec_align_size1;
 
 struct ec_response_battery_vendor_param {
 	uint32_t value;
-} __packed;
+} __ec_align4;
 
 /*****************************************************************************/
 /* Commands for I2S recording on audio codec. */
@@ -2833,7 +2867,7 @@ enum ec_i2s_config {
 	EC_DAI_FMT_PCM_TDM = 5,
 };
 
-struct ec_param_codec_i2s {
+struct __ec_todo_packed ec_param_codec_i2s {
 	/* enum ec_codec_i2s_subcmd */
 	uint8_t cmd;
 	union {
@@ -2847,10 +2881,10 @@ struct ec_param_codec_i2s {
 		 * EC_CODEC_SET_GAIN
 		 * Value should be 0~43 for both channels.
 		 */
-		struct ec_param_codec_i2s_set_gain {
+		struct __ec_align1 ec_param_codec_i2s_set_gain {
 			uint8_t left;
 			uint8_t right;
-		} __packed gain;
+		} gain;
 
 		/*
 		 * EC_CODEC_I2S_ENABLE
@@ -2868,7 +2902,7 @@ struct ec_param_codec_i2s {
 		 * EC_CODEC_I2S_SET_TDM_CONFIG
 		 * Value should be one of ec_i2s_config.
 		 */
-		struct ec_param_codec_i2s_tdm {
+		struct __ec_todo_unpacked ec_param_codec_i2s_tdm {
 			/*
 			 * 0 to 496
 			 */
@@ -2879,14 +2913,14 @@ struct ec_param_codec_i2s {
 			int16_t ch1_delay;
 			uint8_t adjacent_to_ch0;
 			uint8_t adjacent_to_ch1;
-		} __packed tdm_param;
+		} tdm_param;
 
 		/*
 		 * EC_CODEC_I2S_SET_BCLK
 		 */
 		uint32_t bclk;
 	};
-} __packed;
+};
 
 /*
  * For subcommand EC_CODEC_GET_GAIN.
@@ -2894,7 +2928,7 @@ struct ec_param_codec_i2s {
 struct ec_response_codec_gain {
 	uint8_t left;
 	uint8_t right;
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /* System commands */
@@ -2923,7 +2957,7 @@ enum ec_reboot_cmd {
 struct ec_params_reboot_ec {
 	uint8_t cmd;           /* enum ec_reboot_cmd */
 	uint8_t flags;         /* See EC_REBOOT_FLAG_* */
-} __packed;
+} __ec_align1;
 
 /*
  * Get information on last EC panic.
@@ -3066,7 +3100,7 @@ struct ec_params_reboot_ec {
  */
 struct ec_params_cec_write {
 	uint8_t msg[EC_MAX_CEC_MSG_LEN];
-} __packed;
+} __ec_align1;
 
 /* Set various CEC parameters */
 #define EC_CMD_CEC_SET 0x00BA
@@ -3082,7 +3116,7 @@ struct ec_params_cec_write {
 struct ec_params_cec_set {
 	uint8_t cmd; /* enum cec_command */
 	uint8_t val;
-} __packed;
+} __ec_align1;
 
 /* Read various CEC parameters */
 #define EC_CMD_CEC_GET 0x00BB
@@ -3093,7 +3127,7 @@ struct ec_params_cec_set {
  */
 struct ec_params_cec_get {
 	uint8_t cmd; /* enum cec_command */
-} __packed;
+} __ec_align1;
 
 /**
  * struct ec_response_cec_get - CEC parameters get response
@@ -3104,7 +3138,7 @@ struct ec_params_cec_get {
  */
 struct ec_response_cec_get {
 	uint8_t val;
-} __packed;
+} __ec_align1;
 
 /* CEC parameters command */
 enum ec_cec_command {
@@ -3177,13 +3211,13 @@ enum mkbp_cec_event {
 /* Status of EC being sent to PD */
 struct ec_params_pd_status {
 	int8_t batt_soc; /* battery state of charge */
-} __packed;
+} __ec_align1;
 
 /* Status of PD being sent back to EC */
 struct ec_response_pd_status {
 	int8_t status;        /* PD MCU status */
 	uint32_t curr_lim_ma; /* input current limit */
-} __packed;
+} __ec_align_size1;
 
 /* Set USB type-C port role and muxes */
 #define EC_CMD_USB_PD_CONTROL 0x101
@@ -3218,7 +3252,7 @@ struct ec_params_usb_pd_control {
 	uint8_t role;
 	uint8_t mux;
 	uint8_t swap;
-} __packed;
+} __ec_align1;
 
 #define PD_CTRL_RESP_ENABLED_COMMS      (1 << 0) /* Communication enabled */
 #define PD_CTRL_RESP_ENABLED_CONNECTED  (1 << 1) /* Device connected */
@@ -3237,7 +3271,7 @@ struct ec_response_usb_pd_control_v1 {
 	uint8_t role;
 	uint8_t polarity;
 	char state[32];
-} __packed;
+} __ec_align1;
 
 #define EC_CMD_USB_PD_PORTS 0x102
 
@@ -3246,14 +3280,14 @@ struct ec_response_usb_pd_control_v1 {
 
 struct ec_response_usb_pd_ports {
 	uint8_t num_ports;
-} __packed;
+} __ec_align1;
 
 #define EC_CMD_USB_PD_POWER_INFO 0x103
 
 #define PD_POWER_CHARGING_PORT 0xff
 struct ec_params_usb_pd_power_info {
 	uint8_t port;
-} __packed;
+} __ec_align1;
 
 enum usb_chg_type {
 	USB_CHG_TYPE_NONE,
@@ -3279,7 +3313,7 @@ struct usb_chg_measures {
 	uint16_t voltage_now;
 	uint16_t current_max;
 	uint16_t current_lim;
-} __packed;
+} __ec_align2;
 
 struct ec_response_usb_pd_power_info {
 	uint8_t role;
@@ -3288,11 +3322,11 @@ struct ec_response_usb_pd_power_info {
 	uint8_t reserved1;
 	struct usb_chg_measures meas;
 	uint32_t max_power;
-} __packed;
+} __ec_align4;
 
 struct ec_params_usb_pd_info_request {
 	uint8_t port;
-} __packed;
+} __ec_align1;
 
 /*
  * This command will return the number of USB PD charge port + the number
@@ -3302,7 +3336,7 @@ struct ec_params_usb_pd_info_request {
 #define EC_CMD_CHARGE_PORT_COUNT 0x0105
 struct ec_response_charge_port_count {
 	uint8_t port_count;
-} __packed;
+} __ec_align1;
 
 /* Read USB-PD Device discovery info */
 #define EC_CMD_USB_PD_DISCOVERY 0x0113
@@ -3310,7 +3344,7 @@ struct ec_params_usb_pd_discovery_entry {
 	uint16_t vid;  /* USB-IF VID */
 	uint16_t pid;  /* USB-IF PID */
 	uint8_t ptype; /* product type (hub,periph,cable,ama) */
-} __packed;
+} __ec_align_size1;
 
 /* Override default charge behavior */
 #define EC_CMD_PD_CHARGE_PORT_OVERRIDE 0x0114
@@ -3324,7 +3358,7 @@ enum usb_pd_override_ports {
 
 struct ec_params_charge_port_override {
 	int16_t override_port; /* Override port# */
-} __packed;
+} __ec_align2;
 
 /* Read (and delete) one entry of PD event log */
 #define EC_CMD_PD_GET_LOG_ENTRY 0x0115
@@ -3335,7 +3369,7 @@ struct ec_response_pd_log {
 	uint8_t size_port;  /* [7:5] port number [4:0] payload size in bytes */
 	uint16_t data;      /* type-defined data payload */
 	uint8_t payload[0]; /* optional additional data payload: 0..16 bytes */
-} __packed;
+} __ec_align4;
 
 /* The timestamp is the microsecond counter shifted to get about a ms. */
 #define PD_LOG_TIMESTAMP_SHIFT 10 /* 1 LSB = 1024us */
@@ -3401,14 +3435,14 @@ struct mcdp_version {
 	uint8_t major;
 	uint8_t minor;
 	uint16_t build;
-} __packed;
+} __ec_align4;
 
 struct mcdp_info {
 	uint8_t family[2];
 	uint8_t chipid[2];
 	struct mcdp_version irom;
 	struct mcdp_version fw;
-} __packed;
+} __ec_align4;
 
 /* struct mcdp_info field decoding */
 #define MCDP_CHIPID(chipid) ((chipid[0] << 8) | chipid[1])
@@ -3419,7 +3453,7 @@ struct mcdp_info {
 
 struct ec_params_usb_pd_mux_info {
 	uint8_t port; /* USB-C port number */
-} __packed;
+} __ec_align1;
 
 /* Flags representing mux state */
 #define USB_PD_MUX_USB_ENABLED       (1 << 0)
@@ -3429,7 +3463,7 @@ struct ec_params_usb_pd_mux_info {
 
 struct ec_response_usb_pd_mux_info {
 	uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /*
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 05/30] mfd: cros_ec: Define commands as 4-digit UPPER CASE hex values
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (3 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 04/30] mfd: cros_ec: add ec_align macros Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 06/30] mfd: cros_ec: use BIT macro Gwendal Grignou
                   ` (25 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

This change is required for compilation of embedded controller firmware
to work properly (See CONFIG_HOSTCMD_SECTION_SORTED).

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 235 ++++++++++++++++-----------
 1 file changed, 136 insertions(+), 99 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index e0f6e9d9f587..735d4f8ce09d 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -553,6 +553,9 @@ struct ec_host_response {
  * Parameter/response length is implicit in the structs.  Some underlying
  * communication protocols (I2C, SPI) may add length or checksum headers, but
  * those are implementation-dependent and not defined here.
+ *
+ * All commands MUST be #defined to be 4-digit UPPER CASE hex values
+ * (e.g., 0x00AB, not 0xab) for CONFIG_HOSTCMD_SECTION_SORTED to work.
  */
 
 /*****************************************************************************/
@@ -562,7 +565,7 @@ struct ec_host_response {
  * Get protocol version, used to deal with non-backward compatible protocol
  * changes.
  */
-#define EC_CMD_PROTO_VERSION 0x00
+#define EC_CMD_PROTO_VERSION 0x0000
 
 /**
  * struct ec_response_proto_version - Response to the proto version command.
@@ -576,7 +579,7 @@ struct ec_response_proto_version {
  * Hello.  This is a simple command to test the EC is responsive to
  * commands.
  */
-#define EC_CMD_HELLO 0x01
+#define EC_CMD_HELLO 0x0001
 
 /**
  * struct ec_params_hello - Parameters to the hello command.
@@ -595,7 +598,7 @@ struct ec_response_hello {
 } __ec_align4;
 
 /* Get version number */
-#define EC_CMD_GET_VERSION 0x02
+#define EC_CMD_GET_VERSION 0x0002
 
 enum ec_current_image {
 	EC_IMAGE_UNKNOWN = 0,
@@ -618,7 +621,7 @@ struct ec_response_get_version {
 } __ec_align4;
 
 /* Read test */
-#define EC_CMD_READ_TEST 0x03
+#define EC_CMD_READ_TEST 0x0003
 
 /**
  * struct ec_params_read_test - Parameters for the read test command.
@@ -643,10 +646,10 @@ struct ec_response_read_test {
  *
  * Response is null-terminated string.
  */
-#define EC_CMD_GET_BUILD_INFO 0x04
+#define EC_CMD_GET_BUILD_INFO 0x0004
 
 /* Get chip info */
-#define EC_CMD_GET_CHIP_INFO 0x05
+#define EC_CMD_GET_CHIP_INFO 0x0005
 
 /**
  * struct ec_response_get_chip_info - Response to the get chip info command.
@@ -661,7 +664,7 @@ struct ec_response_get_chip_info {
 } __ec_align4;
 
 /* Get board HW version */
-#define EC_CMD_GET_BOARD_VERSION 0x06
+#define EC_CMD_GET_BOARD_VERSION 0x0006
 
 /**
  * struct ec_response_board_version - Response to the board version command.
@@ -679,7 +682,7 @@ struct ec_response_board_version {
  *
  * Response is params.size bytes of data.
  */
-#define EC_CMD_READ_MEMMAP 0x07
+#define EC_CMD_READ_MEMMAP 0x0007
 
 /**
  * struct ec_params_read_memmap - Parameters for the read memory map command.
@@ -692,7 +695,7 @@ struct ec_params_read_memmap {
 } __ec_align1;
 
 /* Read versions supported for a command */
-#define EC_CMD_GET_CMD_VERSIONS 0x08
+#define EC_CMD_GET_CMD_VERSIONS 0x0008
 
 /**
  * struct ec_params_get_cmd_versions - Parameters for the get command versions.
@@ -727,7 +730,7 @@ struct ec_response_get_cmd_versions {
  * lpc must read the status from the command register. Attempting this on
  * lpc will overwrite the args/parameter space and corrupt its data.
  */
-#define EC_CMD_GET_COMMS_STATUS		0x09
+#define EC_CMD_GET_COMMS_STATUS		0x0009
 
 /* Avoid using ec_status which is for return values */
 enum ec_comms_status {
@@ -744,7 +747,7 @@ struct ec_response_get_comms_status {
 } __ec_align4;
 
 /* Fake a variety of responses, purely for testing purposes. */
-#define EC_CMD_TEST_PROTOCOL		0x0a
+#define EC_CMD_TEST_PROTOCOL		0x000A
 
 /* Tell the EC what to send back to us. */
 struct ec_params_test_protocol {
@@ -759,7 +762,7 @@ struct ec_response_test_protocol {
 } __ec_align4;
 
 /* Get protocol information */
-#define EC_CMD_GET_PROTOCOL_INFO	0x0b
+#define EC_CMD_GET_PROTOCOL_INFO	0x000B
 
 /* Flags for ec_response_get_protocol_info.flags */
 /* EC_RES_IN_PROGRESS may be returned if a command is slow */
@@ -805,11 +808,11 @@ struct ec_response_get_set_value {
 } __ec_align4;
 
 /* More than one command can use these structs to get/set parameters. */
-#define EC_CMD_GSV_PAUSE_IN_S5	0x0c
+#define EC_CMD_GSV_PAUSE_IN_S5	0x000C
 
 /*****************************************************************************/
 /* List the features supported by the firmware */
-#define EC_CMD_GET_FEATURES  0x0d
+#define EC_CMD_GET_FEATURES  0x000D
 
 /* Supported features */
 enum ec_feature_code {
@@ -903,7 +906,7 @@ struct ec_response_get_features {
 /* Flash commands */
 
 /* Get flash info */
-#define EC_CMD_FLASH_INFO 0x10
+#define EC_CMD_FLASH_INFO 0x0010
 
 /**
  * struct ec_response_flash_info - Response to the flash info command.
@@ -970,7 +973,7 @@ struct ec_response_flash_info_1 {
  *
  * Response is params.size bytes of data.
  */
-#define EC_CMD_FLASH_READ 0x11
+#define EC_CMD_FLASH_READ 0x0011
 
 /**
  * struct ec_params_flash_read - Parameters for the flash read command.
@@ -983,7 +986,7 @@ struct ec_params_flash_read {
 } __ec_align4;
 
 /* Write flash */
-#define EC_CMD_FLASH_WRITE 0x12
+#define EC_CMD_FLASH_WRITE 0x0012
 #define EC_VER_FLASH_WRITE 1
 
 /* Version 0 of the flash command supported only 64 bytes of data */
@@ -1001,7 +1004,7 @@ struct ec_params_flash_write {
 } __ec_align4;
 
 /* Erase flash */
-#define EC_CMD_FLASH_ERASE 0x13
+#define EC_CMD_FLASH_ERASE 0x0013
 
 /**
  * struct ec_params_flash_erase - Parameters for the flash erase command.
@@ -1023,7 +1026,7 @@ struct ec_params_flash_erase {
  *
  * If mask=0, simply returns the current flags state.
  */
-#define EC_CMD_FLASH_PROTECT 0x15
+#define EC_CMD_FLASH_PROTECT 0x0015
 #define EC_VER_FLASH_PROTECT 1  /* Command version 1 */
 
 /* Flags for flash protection */
@@ -1080,7 +1083,7 @@ struct ec_response_flash_protect {
  */
 
 /* Get the region offset/size */
-#define EC_CMD_FLASH_REGION_INFO 0x16
+#define EC_CMD_FLASH_REGION_INFO 0x0016
 #define EC_VER_FLASH_REGION_INFO 1
 
 enum ec_flash_region {
@@ -1112,7 +1115,7 @@ struct ec_response_flash_region_info {
 } __ec_align4;
 
 /* Read/write VbNvContext */
-#define EC_CMD_VBNV_CONTEXT 0x17
+#define EC_CMD_VBNV_CONTEXT 0x0017
 #define EC_VER_VBNV_CONTEXT 1
 #define EC_VBNV_BLOCK_SIZE 16
 
@@ -1134,7 +1137,7 @@ struct ec_response_vbnvcontext {
 /* PWM commands */
 
 /* Get fan target RPM */
-#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x20
+#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x0020
 
 struct ec_response_pwm_get_fan_rpm {
 	uint32_t rpm;
@@ -1148,7 +1151,7 @@ struct ec_params_pwm_set_fan_target_rpm {
 } __ec_align_size1;
 
 /* Get keyboard backlight */
-#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x22
+#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x0022
 
 struct ec_response_pwm_get_keyboard_backlight {
 	uint8_t percent;
@@ -1156,20 +1159,20 @@ struct ec_response_pwm_get_keyboard_backlight {
 } __ec_align1;
 
 /* Set keyboard backlight */
-#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x23
+#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x0023
 
 struct ec_params_pwm_set_keyboard_backlight {
 	uint8_t percent;
 } __ec_align1;
 
 /* Set target fan PWM duty cycle */
-#define EC_CMD_PWM_SET_FAN_DUTY 0x24
+#define EC_CMD_PWM_SET_FAN_DUTY 0x0024
 
 struct ec_params_pwm_set_fan_duty {
 	uint32_t percent;
 } __ec_align4;
 
-#define EC_CMD_PWM_SET_DUTY 0x25
+#define EC_CMD_PWM_SET_DUTY 0x0025
 /* 16 bit duty cycle, 0xffff = 100% */
 #define EC_PWM_MAX_DUTY 0xffff
 
@@ -1189,7 +1192,7 @@ struct ec_params_pwm_set_duty {
 	uint8_t index;     /* Type-specific index, or 0 if unique */
 } __ec_align4;
 
-#define EC_CMD_PWM_GET_DUTY 0x26
+#define EC_CMD_PWM_GET_DUTY 0x0026
 
 struct ec_params_pwm_get_duty {
 	uint8_t pwm_type;  /* ec_pwm_type */
@@ -1207,7 +1210,7 @@ struct ec_response_pwm_get_duty {
  * into a subcommand. We'll make separate structs for subcommands with
  * different input args, so that we know how much to expect.
  */
-#define EC_CMD_LIGHTBAR_CMD 0x28
+#define EC_CMD_LIGHTBAR_CMD 0x0028
 
 struct rgb_s {
 	uint8_t r, g, b;
@@ -1401,7 +1404,7 @@ enum lightbar_command {
 /*****************************************************************************/
 /* LED control commands */
 
-#define EC_CMD_LED_CONTROL 0x29
+#define EC_CMD_LED_CONTROL 0x0029
 
 enum ec_led_id {
 	/* LED to indicate battery state of charge */
@@ -1458,7 +1461,7 @@ struct ec_response_led_control {
  */
 
 /* Verified boot hash command */
-#define EC_CMD_VBOOT_HASH 0x2A
+#define EC_CMD_VBOOT_HASH 0x002A
 
 struct ec_params_vboot_hash {
 	uint8_t cmd;             /* enum ec_vboot_hash_cmd */
@@ -1510,7 +1513,7 @@ enum ec_vboot_hash_status {
  * Motion sense commands. We'll make separate structs for sub-commands with
  * different input args, so that we know how much to expect.
  */
-#define EC_CMD_MOTION_SENSE_CMD 0x2B
+#define EC_CMD_MOTION_SENSE_CMD 0x002B
 
 /* Motion sense commands */
 enum motionsense_command {
@@ -1774,7 +1777,7 @@ struct ec_response_motion_sense {
 /* USB charging control commands */
 
 /* Set USB port charging mode */
-#define EC_CMD_USB_CHARGE_SET_MODE 0x30
+#define EC_CMD_USB_CHARGE_SET_MODE 0x0030
 
 struct ec_params_usb_charge_set_mode {
 	uint8_t usb_port_id;
@@ -1788,7 +1791,7 @@ struct ec_params_usb_charge_set_mode {
 #define EC_PSTORE_SIZE_MAX 64
 
 /* Get persistent storage info */
-#define EC_CMD_PSTORE_INFO 0x40
+#define EC_CMD_PSTORE_INFO 0x0040
 
 struct ec_response_pstore_info {
 	/* Persistent storage size, in bytes */
@@ -1802,7 +1805,7 @@ struct ec_response_pstore_info {
  *
  * Response is params.size bytes of data.
  */
-#define EC_CMD_PSTORE_READ 0x41
+#define EC_CMD_PSTORE_READ 0x0041
 
 struct ec_params_pstore_read {
 	uint32_t offset;   /* Byte offset to read */
@@ -1810,7 +1813,7 @@ struct ec_params_pstore_read {
 } __ec_align4;
 
 /* Write persistent storage */
-#define EC_CMD_PSTORE_WRITE 0x42
+#define EC_CMD_PSTORE_WRITE 0x0042
 
 struct ec_params_pstore_write {
 	uint32_t offset;   /* Byte offset to write */
@@ -1831,12 +1834,12 @@ struct ec_response_rtc {
 } __ec_align4;
 
 /* These use ec_response_rtc */
-#define EC_CMD_RTC_GET_VALUE 0x44
-#define EC_CMD_RTC_GET_ALARM 0x45
+#define EC_CMD_RTC_GET_VALUE 0x0044
+#define EC_CMD_RTC_GET_ALARM 0x0045
 
 /* These all use ec_params_rtc */
-#define EC_CMD_RTC_SET_VALUE 0x46
-#define EC_CMD_RTC_SET_ALARM 0x47
+#define EC_CMD_RTC_SET_VALUE 0x0046
+#define EC_CMD_RTC_SET_ALARM 0x0047
 
 /* Pass as time param to SET_ALARM to clear the current alarm */
 #define EC_RTC_ALARM_CLEAR 0
@@ -1848,8 +1851,8 @@ struct ec_response_rtc {
 #define EC_PORT80_SIZE_MAX 32
 
 /* Get last port80 code from previous boot */
-#define EC_CMD_PORT80_LAST_BOOT 0x48
-#define EC_CMD_PORT80_READ 0x48
+#define EC_CMD_PORT80_LAST_BOOT 0x0048
+#define EC_CMD_PORT80_READ 0x0048
 
 enum ec_port80_subcmd {
 	EC_PORT80_GET_INFO = 0,
@@ -1890,8 +1893,8 @@ struct ec_response_port80_last_boot {
  * Version 1 separates the CPU thermal limits from the fan control.
  */
 
-#define EC_CMD_THERMAL_SET_THRESHOLD 0x50
-#define EC_CMD_THERMAL_GET_THRESHOLD 0x51
+#define EC_CMD_THERMAL_SET_THRESHOLD 0x0050
+#define EC_CMD_THERMAL_GET_THRESHOLD 0x0051
 
 /* The version 0 structs are opaque. You have to know what they are for
  * the get/set commands to make any sense.
@@ -1953,10 +1956,10 @@ struct ec_params_thermal_set_threshold_v1 {
 /****************************************************************************/
 
 /* Toggle automatic fan control */
-#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52
+#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x0052
 
 /* Get TMP006 calibration data */
-#define EC_CMD_TMP006_GET_CALIBRATION 0x53
+#define EC_CMD_TMP006_GET_CALIBRATION 0x0053
 
 struct ec_params_tmp006_get_calibration {
 	uint8_t index;
@@ -1970,7 +1973,7 @@ struct ec_response_tmp006_get_calibration {
 } __ec_align4;
 
 /* Set TMP006 calibration data */
-#define EC_CMD_TMP006_SET_CALIBRATION 0x54
+#define EC_CMD_TMP006_SET_CALIBRATION 0x0054
 
 struct ec_params_tmp006_set_calibration {
 	uint8_t index;
@@ -1982,7 +1985,7 @@ struct ec_params_tmp006_set_calibration {
 } __ec_align4;
 
 /* Read raw TMP006 data */
-#define EC_CMD_TMP006_GET_RAW 0x55
+#define EC_CMD_TMP006_GET_RAW 0x0055
 
 struct ec_params_tmp006_get_raw {
 	uint8_t index;
@@ -2006,12 +2009,12 @@ struct ec_response_tmp006_get_raw {
  * to obtain the instantaneous state, use EC_CMD_MKBP_INFO with the type
  * EC_MKBP_INFO_CURRENT and event EC_MKBP_EVENT_KEY_MATRIX.
  */
-#define EC_CMD_MKBP_STATE 0x60
+#define EC_CMD_MKBP_STATE 0x0060
 
 /*
  * Provide information about various MKBP things.  See enum ec_mkbp_info_type.
  */
-#define EC_CMD_MKBP_INFO 0x61
+#define EC_CMD_MKBP_INFO 0x0061
 
 struct ec_response_mkbp_info {
 	uint32_t rows;
@@ -2065,7 +2068,7 @@ enum ec_mkbp_info_type {
 };
 
 /* Simulate key press */
-#define EC_CMD_MKBP_SIMULATE_KEY 0x62
+#define EC_CMD_MKBP_SIMULATE_KEY 0x0062
 
 struct ec_params_mkbp_simulate_key {
 	uint8_t col;
@@ -2074,8 +2077,8 @@ struct ec_params_mkbp_simulate_key {
 } __ec_align1;
 
 /* Configure keyboard scanning */
-#define EC_CMD_MKBP_SET_CONFIG 0x64
-#define EC_CMD_MKBP_GET_CONFIG 0x65
+#define EC_CMD_MKBP_SET_CONFIG 0x0064
+#define EC_CMD_MKBP_GET_CONFIG 0x0065
 
 /* flags */
 enum mkbp_config_flags {
@@ -2128,7 +2131,7 @@ struct ec_response_mkbp_get_config {
 } __ec_align_size1;
 
 /* Run the key scan emulation */
-#define EC_CMD_KEYSCAN_SEQ_CTRL 0x66
+#define EC_CMD_KEYSCAN_SEQ_CTRL 0x0066
 
 enum ec_keyscan_seq_cmd {
 	EC_KEYSCAN_SEQ_STATUS = 0,	/* Get status information */
@@ -2189,7 +2192,7 @@ struct ec_result_keyscan_seq_ctrl {
  *
  * The device replies with UNAVAILABLE if there aren't any pending events.
  */
-#define EC_CMD_GET_NEXT_EVENT 0x67
+#define EC_CMD_GET_NEXT_EVENT 0x0067
 
 enum ec_mkbp_event {
 	/* Keyboard matrix changed. The event data is the new matrix state. */
@@ -2268,7 +2271,7 @@ struct ec_response_get_next_event_v1 {
 /* Temperature sensor commands */
 
 /* Read temperature sensor info */
-#define EC_CMD_TEMP_SENSOR_GET_INFO 0x70
+#define EC_CMD_TEMP_SENSOR_GET_INFO 0x0070
 
 struct ec_params_temp_sensor_get_info {
 	uint8_t id;
@@ -2303,30 +2306,30 @@ struct ec_response_host_event_mask {
 } __ec_align4;
 
 /* These all use ec_response_host_event_mask */
-#define EC_CMD_HOST_EVENT_GET_B         0x87
-#define EC_CMD_HOST_EVENT_GET_SMI_MASK  0x88
-#define EC_CMD_HOST_EVENT_GET_SCI_MASK  0x89
-#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x8d
+#define EC_CMD_HOST_EVENT_GET_B         0x0087
+#define EC_CMD_HOST_EVENT_GET_SMI_MASK  0x0088
+#define EC_CMD_HOST_EVENT_GET_SCI_MASK  0x0089
+#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x008D
 
 /* These all use ec_params_host_event_mask */
-#define EC_CMD_HOST_EVENT_SET_SMI_MASK  0x8a
-#define EC_CMD_HOST_EVENT_SET_SCI_MASK  0x8b
-#define EC_CMD_HOST_EVENT_CLEAR         0x8c
-#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x8e
-#define EC_CMD_HOST_EVENT_CLEAR_B       0x8f
+#define EC_CMD_HOST_EVENT_SET_SMI_MASK  0x008A
+#define EC_CMD_HOST_EVENT_SET_SCI_MASK  0x008B
+#define EC_CMD_HOST_EVENT_CLEAR         0x008C
+#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x008E
+#define EC_CMD_HOST_EVENT_CLEAR_B       0x008F
 
 /*****************************************************************************/
 /* Switch commands */
 
 /* Enable/disable LCD backlight */
-#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x90
+#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x0090
 
 struct ec_params_switch_enable_backlight {
 	uint8_t enabled;
 } __ec_align1;
 
 /* Enable/disable WLAN/Bluetooth */
-#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91
+#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x0091
 #define EC_VER_SWITCH_ENABLE_WIRELESS 1
 
 /* Version 0 params; no response */
@@ -2366,7 +2369,7 @@ struct ec_response_switch_enable_wireless_v1 {
 /* GPIO commands. Only available on EC if write protect has been disabled. */
 
 /* Set GPIO output value */
-#define EC_CMD_GPIO_SET 0x92
+#define EC_CMD_GPIO_SET 0x0092
 
 struct ec_params_gpio_set {
 	char name[32];
@@ -2374,7 +2377,7 @@ struct ec_params_gpio_set {
 } __ec_align1;
 
 /* Get GPIO value */
-#define EC_CMD_GPIO_GET 0x93
+#define EC_CMD_GPIO_GET 0x0093
 
 /* Version 0 of input params and response */
 struct ec_params_gpio_get {
@@ -2428,7 +2431,7 @@ enum gpio_get_subcmd {
  */
 
 /* Read I2C bus */
-#define EC_CMD_I2C_READ 0x94
+#define EC_CMD_I2C_READ 0x0094
 
 struct ec_params_i2c_read {
 	uint16_t addr; /* 8-bit address (7-bit shifted << 1) */
@@ -2442,7 +2445,7 @@ struct ec_response_i2c_read {
 } __ec_align2;
 
 /* Write I2C bus */
-#define EC_CMD_I2C_WRITE 0x95
+#define EC_CMD_I2C_WRITE 0x0095
 
 struct ec_params_i2c_write {
 	uint16_t data;
@@ -2458,7 +2461,7 @@ struct ec_params_i2c_write {
 /* Force charge state machine to stop charging the battery or force it to
  * discharge the battery.
  */
-#define EC_CMD_CHARGE_CONTROL 0x96
+#define EC_CMD_CHARGE_CONTROL 0x0096
 #define EC_VER_CHARGE_CONTROL 1
 
 enum ec_charge_control_mode {
@@ -2474,7 +2477,7 @@ struct ec_params_charge_control {
 /*****************************************************************************/
 
 /* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */
-#define EC_CMD_CONSOLE_SNAPSHOT 0x97
+#define EC_CMD_CONSOLE_SNAPSHOT 0x0097
 
 /*
  * Read data from the saved snapshot. If the subcmd parameter is
@@ -2488,7 +2491,7 @@ struct ec_params_charge_control {
  * Response is null-terminated string.  Empty string, if there is no more
  * remaining output.
  */
-#define EC_CMD_CONSOLE_READ 0x98
+#define EC_CMD_CONSOLE_READ 0x0098
 
 enum ec_console_read_subcmd {
 	CONSOLE_READ_NEXT = 0,
@@ -2508,8 +2511,7 @@ struct ec_params_console_read_v1 {
  *	  EC_RES_SUCCESS if the command was successful.
  *	  EC_RES_ERROR if the cut off command failed.
  */
-
-#define EC_CMD_BATTERY_CUT_OFF 0x99
+#define EC_CMD_BATTERY_CUT_OFF 0x0099
 
 #define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN	(1 << 0)
 
@@ -2523,7 +2525,7 @@ struct ec_params_battery_cutoff {
 /*
  * Switch USB mux or return to automatic switching.
  */
-#define EC_CMD_USB_MUX 0x9a
+#define EC_CMD_USB_MUX 0x009A
 
 struct ec_params_usb_mux {
 	uint8_t mux;
@@ -2540,7 +2542,7 @@ enum ec_ldo_state {
 /*
  * Switch on/off a LDO.
  */
-#define EC_CMD_LDO_SET 0x9b
+#define EC_CMD_LDO_SET 0x009B
 
 struct ec_params_ldo_set {
 	uint8_t index;
@@ -2550,7 +2552,7 @@ struct ec_params_ldo_set {
 /*
  * Get LDO state.
  */
-#define EC_CMD_LDO_GET 0x9c
+#define EC_CMD_LDO_GET 0x009C
 
 struct ec_params_ldo_get {
 	uint8_t index;
@@ -2566,7 +2568,7 @@ struct ec_response_ldo_get {
 /*
  * Get power info.
  */
-#define EC_CMD_POWER_INFO 0x9d
+#define EC_CMD_POWER_INFO 0x009D
 
 struct ec_response_power_info {
 	uint32_t usb_dev_type;
@@ -2579,7 +2581,7 @@ struct ec_response_power_info {
 /*****************************************************************************/
 /* I2C passthru command */
 
-#define EC_CMD_I2C_PASSTHRU 0x9e
+#define EC_CMD_I2C_PASSTHRU 0x009E
 
 /* Read data; if not present, message is a write */
 #define EC_I2C_FLAG_READ	(1 << 15)
@@ -2614,7 +2616,7 @@ struct ec_response_i2c_passthru {
 /*****************************************************************************/
 /* Power button hang detect */
 
-#define EC_CMD_HANG_DETECT 0x9f
+#define EC_CMD_HANG_DETECT 0x009F
 
 /* Reasons to start hang detection timer */
 /* Power button pressed */
@@ -2673,7 +2675,7 @@ struct ec_params_hang_detect {
  * This is the single catch-all host command to exchange data regarding the
  * charge state machine (v2 and up).
  */
-#define EC_CMD_CHARGE_STATE 0xa0
+#define EC_CMD_CHARGE_STATE 0x00A0
 
 /* Subcommands for this host command */
 enum charge_state_command {
@@ -2744,7 +2746,7 @@ struct ec_response_charge_state {
 /*
  * Set maximum battery charging current.
  */
-#define EC_CMD_CHARGE_CURRENT_LIMIT 0xa1
+#define EC_CMD_CHARGE_CURRENT_LIMIT 0x00A1
 
 struct ec_params_current_limit {
 	uint32_t limit; /* in mA */
@@ -2764,7 +2766,7 @@ struct ec_params_external_power_limit_v1 {
 #define EC_POWER_LIMIT_NONE 0xffff
 
 /* Inform the EC when entering a sleep state */
-#define EC_CMD_HOST_SLEEP_EVENT 0xa9
+#define EC_CMD_HOST_SLEEP_EVENT 0x00A9
 
 enum host_sleep_event {
 	HOST_SLEEP_EVENT_S3_SUSPEND   = 1,
@@ -2781,14 +2783,14 @@ struct ec_params_host_sleep_event {
 /* Smart battery pass-through */
 
 /* Get / Set 16-bit smart battery registers */
-#define EC_CMD_SB_READ_WORD   0xb0
-#define EC_CMD_SB_WRITE_WORD  0xb1
+#define EC_CMD_SB_READ_WORD   0x00B0
+#define EC_CMD_SB_WRITE_WORD  0x00B1
 
 /* Get / Set string smart battery parameters
  * formatted as SMBUS "block".
  */
-#define EC_CMD_SB_READ_BLOCK  0xb2
-#define EC_CMD_SB_WRITE_BLOCK 0xb3
+#define EC_CMD_SB_READ_BLOCK  0x00B2
+#define EC_CMD_SB_WRITE_BLOCK 0x00B3
 
 struct ec_params_sb_rd {
 	uint8_t reg;
@@ -2821,7 +2823,7 @@ struct ec_params_sb_wr_block {
  * requested value.
  */
 
-#define EC_CMD_BATTERY_VENDOR_PARAM 0xb4
+#define EC_CMD_BATTERY_VENDOR_PARAM 0x00B4
 
 enum ec_battery_vendor_param_mode {
 	BATTERY_VENDOR_PARAM_MODE_GET = 0,
@@ -2937,7 +2939,7 @@ struct ec_response_codec_gain {
  * TODO(crosbug.com/p/23747): This is a confusing name, since it doesn't
  * necessarily reboot the EC.  Rename to "image" or something similar?
  */
-#define EC_CMD_REBOOT_EC 0xd2
+#define EC_CMD_REBOOT_EC 0x00D2
 
 /* Command */
 enum ec_reboot_cmd {
@@ -2965,7 +2967,7 @@ struct ec_params_reboot_ec {
  * Returns variable-length platform-dependent panic information.  See panic.h
  * for details.
  */
-#define EC_CMD_GET_PANIC_INFO 0xd3
+#define EC_CMD_GET_PANIC_INFO 0x00D3
 
 /*****************************************************************************/
 /*
@@ -3173,7 +3175,7 @@ enum mkbp_cec_event {
  *
  * Use EC_CMD_REBOOT_EC to reboot the EC more politely.
  */
-#define EC_CMD_REBOOT 0xd1  /* Think "die" */
+#define EC_CMD_REBOOT 0x00D1  /* Think "die" */
 
 /*
  * Resend last response (not supported on LPC).
@@ -3182,7 +3184,7 @@ enum mkbp_cec_event {
  * there was no previous command, or the previous command's response was too
  * big to save.
  */
-#define EC_CMD_RESEND_RESPONSE 0xdb
+#define EC_CMD_RESEND_RESPONSE 0x00DB
 
 /*
  * This header byte on a command indicate version 0. Any header byte less
@@ -3194,7 +3196,7 @@ enum mkbp_cec_event {
  *
  * The old EC interface must not use commands 0xdc or higher.
  */
-#define EC_CMD_VERSION0 0xdc
+#define EC_CMD_VERSION0 0x00DC
 
 #endif  /* !__ACPI__ */
 
@@ -3206,7 +3208,7 @@ enum mkbp_cec_event {
  */
 
 /* EC to PD MCU exchange status command */
-#define EC_CMD_PD_EXCHANGE_STATUS 0x100
+#define EC_CMD_PD_EXCHANGE_STATUS 0x0100
 
 /* Status of EC being sent to PD */
 struct ec_params_pd_status {
@@ -3220,7 +3222,7 @@ struct ec_response_pd_status {
 } __ec_align_size1;
 
 /* Set USB type-C port role and muxes */
-#define EC_CMD_USB_PD_CONTROL 0x101
+#define EC_CMD_USB_PD_CONTROL 0x0101
 
 enum usb_pd_control_role {
 	USB_PD_CTRL_ROLE_NO_CHANGE = 0,
@@ -3273,7 +3275,7 @@ struct ec_response_usb_pd_control_v1 {
 	char state[32];
 } __ec_align1;
 
-#define EC_CMD_USB_PD_PORTS 0x102
+#define EC_CMD_USB_PD_PORTS 0x0102
 
 /* Maximum number of PD ports on a device, num_ports will be <= this */
 #define EC_USB_PD_MAX_PORTS 8
@@ -3282,7 +3284,7 @@ struct ec_response_usb_pd_ports {
 	uint8_t num_ports;
 } __ec_align1;
 
-#define EC_CMD_USB_PD_POWER_INFO 0x103
+#define EC_CMD_USB_PD_POWER_INFO 0x0103
 
 #define PD_POWER_CHARGING_PORT 0xff
 struct ec_params_usb_pd_power_info {
@@ -3449,7 +3451,7 @@ struct mcdp_info {
 #define MCDP_FAMILY(family) ((family[0] << 8) | family[1])
 
 /* Get info about USB-C SS muxes */
-#define EC_CMD_USB_PD_MUX_INFO 0x11a
+#define EC_CMD_USB_PD_MUX_INFO 0x011A
 
 struct ec_params_usb_pd_mux_info {
 	uint8_t port; /* USB-C port number */
@@ -3464,6 +3466,41 @@ struct ec_params_usb_pd_mux_info {
 struct ec_response_usb_pd_mux_info {
 	uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */
 } __ec_align1;
+/*****************************************************************************/
+/*
+ * Reserve a range of host commands for board-specific, experimental, or
+ * special purpose features. These can be (re)used without updating this file.
+ *
+ * CAUTION: Don't go nuts with this. Shipping products should document ALL
+ * their EC commands for easier development, testing, debugging, and support.
+ *
+ * All commands MUST be #defined to be 4-digit UPPER CASE hex values
+ * (e.g., 0x00AB, not 0xab) for CONFIG_HOSTCMD_SECTION_SORTED to work.
+ *
+ * In your experimental code, you may want to do something like this:
+ *
+ *   #define EC_CMD_MAGIC_FOO 0x0000
+ *   #define EC_CMD_MAGIC_BAR 0x0001
+ *   #define EC_CMD_MAGIC_HEY 0x0002
+ *
+ *   DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_FOO, magic_foo_handler,
+ *      EC_VER_MASK(0);
+ *
+ *   DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_BAR, magic_bar_handler,
+ *      EC_VER_MASK(0);
+ *
+ *   DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_HEY, magic_hey_handler,
+ *      EC_VER_MASK(0);
+ */
+#define EC_CMD_BOARD_SPECIFIC_BASE 0x3E00
+#define EC_CMD_BOARD_SPECIFIC_LAST 0x3FFF
+
+/*
+ * Given the private host command offset, calculate the true private host
+ * command value.
+ */
+#define EC_PRIVATE_HOST_COMMAND_VALUE(command) \
+	(EC_CMD_BOARD_SPECIFIC_BASE + (command))
 
 /*****************************************************************************/
 /*
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 06/30] mfd: cros_ec: use BIT macro
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (4 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 05/30] mfd: cros_ec: Define commands as 4-digit UPPER CASE hex values Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 07/30] mfd: cros_ec: Update ACPI interface definition Gwendal Grignou
                   ` (24 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Replace (1 << ...) with BIT().

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 110 +++++++++++++--------------
 1 file changed, 55 insertions(+), 55 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 735d4f8ce09d..7044f459cb1d 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -28,7 +28,7 @@
 #define EC_PROTO_VERSION          0x00000002
 
 /* Command version mask */
-#define EC_VER_MASK(version) (1UL << (version))
+#define EC_VER_MASK(version) BIT(version)
 
 /* I/O addresses for ACPI commands */
 #define EC_LPC_ADDR_ACPI_DATA  0x62
@@ -57,13 +57,13 @@
 #define EC_HOST_CMD_REGION_SIZE 0x80
 
 /* EC command register bit functions */
-#define EC_LPC_CMDR_DATA	(1 << 0)  /* Data ready for host to read */
-#define EC_LPC_CMDR_PENDING	(1 << 1)  /* Write pending to EC */
-#define EC_LPC_CMDR_BUSY	(1 << 2)  /* EC is busy processing a command */
-#define EC_LPC_CMDR_CMD		(1 << 3)  /* Last host write was a command */
-#define EC_LPC_CMDR_ACPI_BRST	(1 << 4)  /* Burst mode (not used) */
-#define EC_LPC_CMDR_SCI		(1 << 5)  /* SCI event is pending */
-#define EC_LPC_CMDR_SMI		(1 << 6)  /* SMI event is pending */
+#define EC_LPC_CMDR_DATA	BIT(0)  /* Data ready for host to read */
+#define EC_LPC_CMDR_PENDING	BIT(1)  /* Write pending to EC */
+#define EC_LPC_CMDR_BUSY	BIT(2)  /* EC is busy processing a command */
+#define EC_LPC_CMDR_CMD		BIT(3)  /* Last host write was a command */
+#define EC_LPC_CMDR_ACPI_BRST	BIT(4)  /* Burst mode (not used) */
+#define EC_LPC_CMDR_SCI		BIT(5)  /* SCI event is pending */
+#define EC_LPC_CMDR_SMI		BIT(6)  /* SMI event is pending */
 
 #define EC_LPC_ADDR_MEMMAP       0x900
 #define EC_MEMMAP_SIZE         255 /* ACPI IO buffer max is 255 bytes */
@@ -110,8 +110,8 @@
 
 /* Define the format of the accelerometer mapped memory status byte. */
 #define EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK  0x0f
-#define EC_MEMMAP_ACC_STATUS_BUSY_BIT        (1 << 4)
-#define EC_MEMMAP_ACC_STATUS_PRESENCE_BIT    (1 << 7)
+#define EC_MEMMAP_ACC_STATUS_BUSY_BIT        BIT(4)
+#define EC_MEMMAP_ACC_STATUS_PRESENCE_BIT    BIT(7)
 
 /* Number of temp sensors at EC_MEMMAP_TEMP_SENSOR */
 #define EC_TEMP_SENSOR_ENTRIES     16
@@ -336,7 +336,7 @@ enum host_event_code {
 	EC_HOST_EVENT_INVALID = 32
 };
 /* Host event mask */
-#define EC_HOST_EVENT_MASK(event_code) (1UL << ((event_code) - 1))
+#define EC_HOST_EVENT_MASK(event_code) BIT_ULL((event_code) - 1)
 
 /**
  * struct ec_lpc_host_args - Arguments at EC_LPC_ADDR_HOST_ARGS
@@ -734,7 +734,7 @@ struct ec_response_get_cmd_versions {
 
 /* Avoid using ec_status which is for return values */
 enum ec_comms_status {
-	EC_COMMS_STATUS_PROCESSING	= 1 << 0,	/* Processing cmd */
+	EC_COMMS_STATUS_PROCESSING	= BIT(0),	/* Processing cmd */
 };
 
 /**
@@ -766,7 +766,7 @@ struct ec_response_test_protocol {
 
 /* Flags for ec_response_get_protocol_info.flags */
 /* EC_RES_IN_PROGRESS may be returned if a command is slow */
-#define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED (1 << 0)
+#define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED BIT(0)
 
 /**
  * struct ec_response_get_protocol_info - Response to the get protocol info.
@@ -895,8 +895,8 @@ enum ec_feature_code {
 	EC_FEATURE_ISH = 40,
 };
 
-#define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32))
-#define EC_FEATURE_MASK_1(event_code) (1UL << (event_code - 32))
+#define EC_FEATURE_MASK_0(event_code) BIT(event_code % 32)
+#define EC_FEATURE_MASK_1(event_code) BIT(event_code - 32)
 
 struct ec_response_get_features {
 	uint32_t flags[2];
@@ -931,7 +931,7 @@ struct ec_response_flash_info {
  * Flags for version 1+ flash info command
  * EC flash erases bits to 0 instead of 1.
  */
-#define EC_FLASH_INFO_ERASE_TO_0 (1 << 0)
+#define EC_FLASH_INFO_ERASE_TO_0 BIT(0)
 
 /**
  * struct ec_response_flash_info_1 - Response to the flash info v1 command.
@@ -1031,26 +1031,26 @@ struct ec_params_flash_erase {
 
 /* Flags for flash protection */
 /* RO flash code protected when the EC boots */
-#define EC_FLASH_PROTECT_RO_AT_BOOT         (1 << 0)
+#define EC_FLASH_PROTECT_RO_AT_BOOT         BIT(0)
 /*
  * RO flash code protected now.  If this bit is set, at-boot status cannot
  * be changed.
  */
-#define EC_FLASH_PROTECT_RO_NOW             (1 << 1)
+#define EC_FLASH_PROTECT_RO_NOW             BIT(1)
 /* Entire flash code protected now, until reboot. */
-#define EC_FLASH_PROTECT_ALL_NOW            (1 << 2)
+#define EC_FLASH_PROTECT_ALL_NOW            BIT(2)
 /* Flash write protect GPIO is asserted now */
-#define EC_FLASH_PROTECT_GPIO_ASSERTED      (1 << 3)
+#define EC_FLASH_PROTECT_GPIO_ASSERTED      BIT(3)
 /* Error - at least one bank of flash is stuck locked, and cannot be unlocked */
-#define EC_FLASH_PROTECT_ERROR_STUCK        (1 << 4)
+#define EC_FLASH_PROTECT_ERROR_STUCK        BIT(4)
 /*
  * Error - flash protection is in inconsistent state.  At least one bank of
  * flash which should be protected is not protected.  Usually fixed by
  * re-requesting the desired flags, or by a hard reset if that fails.
  */
-#define EC_FLASH_PROTECT_ERROR_INCONSISTENT (1 << 5)
+#define EC_FLASH_PROTECT_ERROR_INCONSISTENT BIT(5)
 /* Entire flash code protected when the EC boots */
-#define EC_FLASH_PROTECT_ALL_AT_BOOT        (1 << 6)
+#define EC_FLASH_PROTECT_ALL_AT_BOOT        BIT(6)
 
 /**
  * struct ec_params_flash_protect - Parameters for the flash protect command.
@@ -1421,8 +1421,8 @@ enum ec_led_id {
 };
 
 /* LED control flags */
-#define EC_LED_FLAGS_QUERY (1 << 0) /* Query LED capability only */
-#define EC_LED_FLAGS_AUTO  (1 << 1) /* Switch LED back to automatic control */
+#define EC_LED_FLAGS_QUERY BIT(0) /* Query LED capability only */
+#define EC_LED_FLAGS_AUTO  BIT(1) /* Switch LED back to automatic control */
 
 enum ec_led_colors {
 	EC_LED_COLOR_RED = 0,
@@ -2086,13 +2086,13 @@ enum mkbp_config_flags {
 };
 
 enum mkbp_config_valid {
-	EC_MKBP_VALID_SCAN_PERIOD		= 1 << 0,
-	EC_MKBP_VALID_POLL_TIMEOUT		= 1 << 1,
-	EC_MKBP_VALID_MIN_POST_SCAN_DELAY	= 1 << 3,
-	EC_MKBP_VALID_OUTPUT_SETTLE		= 1 << 4,
-	EC_MKBP_VALID_DEBOUNCE_DOWN		= 1 << 5,
-	EC_MKBP_VALID_DEBOUNCE_UP		= 1 << 6,
-	EC_MKBP_VALID_FIFO_MAX_DEPTH		= 1 << 7,
+	EC_MKBP_VALID_SCAN_PERIOD		= BIT(0),
+	EC_MKBP_VALID_POLL_TIMEOUT		= BIT(1),
+	EC_MKBP_VALID_MIN_POST_SCAN_DELAY	= BIT(3),
+	EC_MKBP_VALID_OUTPUT_SETTLE		= BIT(4),
+	EC_MKBP_VALID_DEBOUNCE_DOWN		= BIT(5),
+	EC_MKBP_VALID_DEBOUNCE_UP		= BIT(6),
+	EC_MKBP_VALID_FIFO_MAX_DEPTH		= BIT(7),
 };
 
 /*
@@ -2146,7 +2146,7 @@ enum ec_collect_flags {
 	 * Indicates this scan was processed by the EC. Due to timing, some
 	 * scans may be skipped.
 	 */
-	EC_KEYSCAN_SEQ_FLAG_DONE	= 1 << 0,
+	EC_KEYSCAN_SEQ_FLAG_DONE	= BIT(0),
 };
 
 struct ec_collect_item {
@@ -2513,7 +2513,7 @@ struct ec_params_console_read_v1 {
  */
 #define EC_CMD_BATTERY_CUT_OFF 0x0099
 
-#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN	(1 << 0)
+#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN	BIT(0)
 
 struct ec_params_battery_cutoff {
 	uint8_t flags;
@@ -2584,13 +2584,13 @@ struct ec_response_power_info {
 #define EC_CMD_I2C_PASSTHRU 0x009E
 
 /* Read data; if not present, message is a write */
-#define EC_I2C_FLAG_READ	(1 << 15)
+#define EC_I2C_FLAG_READ	BIT(15)
 
 /* Mask for address */
 #define EC_I2C_ADDR_MASK	0x3ff
 
-#define EC_I2C_STATUS_NAK	(1 << 0) /* Transfer was not acknowledged */
-#define EC_I2C_STATUS_TIMEOUT	(1 << 1) /* Timeout during transfer */
+#define EC_I2C_STATUS_NAK	BIT(0) /* Transfer was not acknowledged */
+#define EC_I2C_STATUS_TIMEOUT	BIT(1) /* Timeout during transfer */
 
 /* Any error */
 #define EC_I2C_STATUS_ERROR	(EC_I2C_STATUS_NAK | EC_I2C_STATUS_TIMEOUT)
@@ -2620,27 +2620,27 @@ struct ec_response_i2c_passthru {
 
 /* Reasons to start hang detection timer */
 /* Power button pressed */
-#define EC_HANG_START_ON_POWER_PRESS  (1 << 0)
+#define EC_HANG_START_ON_POWER_PRESS  BIT(0)
 
 /* Lid closed */
-#define EC_HANG_START_ON_LID_CLOSE    (1 << 1)
+#define EC_HANG_START_ON_LID_CLOSE    BIT(1)
 
  /* Lid opened */
-#define EC_HANG_START_ON_LID_OPEN     (1 << 2)
+#define EC_HANG_START_ON_LID_OPEN     BIT(2)
 
 /* Start of AP S3->S0 transition (booting or resuming from suspend) */
-#define EC_HANG_START_ON_RESUME       (1 << 3)
+#define EC_HANG_START_ON_RESUME       BIT(3)
 
 /* Reasons to cancel hang detection */
 
 /* Power button released */
-#define EC_HANG_STOP_ON_POWER_RELEASE (1 << 8)
+#define EC_HANG_STOP_ON_POWER_RELEASE BIT(8)
 
 /* Any host command from AP received */
-#define EC_HANG_STOP_ON_HOST_COMMAND  (1 << 9)
+#define EC_HANG_STOP_ON_HOST_COMMAND  BIT(9)
 
 /* Stop on end of AP S0->S3 transition (suspending or shutting down) */
-#define EC_HANG_STOP_ON_SUSPEND       (1 << 10)
+#define EC_HANG_STOP_ON_SUSPEND       BIT(10)
 
 /*
  * If this flag is set, all the other fields are ignored, and the hang detect
@@ -2648,14 +2648,14 @@ struct ec_response_i2c_passthru {
  * without reconfiguring any of the other hang detect settings.  Note that
  * you must previously have configured the timeouts.
  */
-#define EC_HANG_START_NOW             (1 << 30)
+#define EC_HANG_START_NOW             BIT(30)
 
 /*
  * If this flag is set, all the other fields are ignored (including
  * EC_HANG_START_NOW).  This provides the AP a way to stop the hang timer
  * without reconfiguring any of the other hang detect settings.
  */
-#define EC_HANG_STOP_NOW              (1 << 31)
+#define EC_HANG_STOP_NOW              BIT(31)
 
 struct ec_params_hang_detect {
 	/* Flags; see EC_HANG_* */
@@ -2953,8 +2953,8 @@ enum ec_reboot_cmd {
 };
 
 /* Flags for ec_params_reboot_ec.reboot_flags */
-#define EC_REBOOT_FLAG_RESERVED0      (1 << 0)  /* Was recovery request */
-#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN (1 << 1)  /* Reboot after AP shutdown */
+#define EC_REBOOT_FLAG_RESERVED0      BIT(0)  /* Was recovery request */
+#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN BIT(1)  /* Reboot after AP shutdown */
 
 struct ec_params_reboot_ec {
 	uint8_t cmd;           /* enum ec_reboot_cmd */
@@ -3256,9 +3256,9 @@ struct ec_params_usb_pd_control {
 	uint8_t swap;
 } __ec_align1;
 
-#define PD_CTRL_RESP_ENABLED_COMMS      (1 << 0) /* Communication enabled */
-#define PD_CTRL_RESP_ENABLED_CONNECTED  (1 << 1) /* Device connected */
-#define PD_CTRL_RESP_ENABLED_PD_CAPABLE (1 << 2) /* Partner is PD capable */
+#define PD_CTRL_RESP_ENABLED_COMMS      BIT(0) /* Communication enabled */
+#define PD_CTRL_RESP_ENABLED_CONNECTED  BIT(1) /* Device connected */
+#define PD_CTRL_RESP_ENABLED_PD_CAPABLE BIT(2) /* Partner is PD capable */
 
 #define PD_CTRL_RESP_ROLE_POWER         BIT(0) /* 0=SNK/1=SRC */
 #define PD_CTRL_RESP_ROLE_DATA          BIT(1) /* 0=UFP/1=DFP */
@@ -3458,10 +3458,10 @@ struct ec_params_usb_pd_mux_info {
 } __ec_align1;
 
 /* Flags representing mux state */
-#define USB_PD_MUX_USB_ENABLED       (1 << 0)
-#define USB_PD_MUX_DP_ENABLED        (1 << 1)
-#define USB_PD_MUX_POLARITY_INVERTED (1 << 2)
-#define USB_PD_MUX_HPD_IRQ           (1 << 3)
+#define USB_PD_MUX_USB_ENABLED       BIT(0) /* USB connected */
+#define USB_PD_MUX_DP_ENABLED        BIT(1) /* DP connected */
+#define USB_PD_MUX_POLARITY_INVERTED BIT(2) /* CC line Polarity inverted */
+#define USB_PD_MUX_HPD_IRQ           BIT(3) /* HPD IRQ is asserted */
 
 struct ec_response_usb_pd_mux_info {
 	uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 07/30] mfd: cros_ec: Update ACPI interface definition
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (5 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 06/30] mfd: cros_ec: use BIT macro Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 08/30] mfd: cros_ec: move HDMI CEC API definition Gwendal Grignou
                   ` (23 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Add more fields and improve API when EC presents data through ACPI
memory space.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 419 +++++++++++++++++++--------
 1 file changed, 293 insertions(+), 126 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 7044f459cb1d..6538c5789c43 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -83,13 +83,15 @@
 /* Unused 0x28 - 0x2f */
 #define EC_MEMMAP_SWITCHES         0x30	/* 8 bits */
 /* Unused 0x31 - 0x33 */
-#define EC_MEMMAP_HOST_EVENTS      0x34 /* 32 bits */
-/* Reserve 0x38 - 0x3f for additional host event-related stuff */
-/* Battery values are all 32 bits */
+#define EC_MEMMAP_HOST_EVENTS      0x34 /* 64 bits */
+/* Battery values are all 32 bits, unless otherwise noted. */
 #define EC_MEMMAP_BATT_VOLT        0x40 /* Battery Present Voltage */
 #define EC_MEMMAP_BATT_RATE        0x44 /* Battery Present Rate */
 #define EC_MEMMAP_BATT_CAP         0x48 /* Battery Remaining Capacity */
-#define EC_MEMMAP_BATT_FLAG        0x4c /* Battery State, defined below */
+#define EC_MEMMAP_BATT_FLAG        0x4c /* Battery State, see below (8-bit) */
+#define EC_MEMMAP_BATT_COUNT       0x4d /* Battery Count (8-bit) */
+#define EC_MEMMAP_BATT_INDEX       0x4e /* Current Battery Data Index (8-bit) */
+/* Unused 0x4f */
 #define EC_MEMMAP_BATT_DCAP        0x50 /* Battery Design Capacity */
 #define EC_MEMMAP_BATT_DVLT        0x54 /* Battery Design Voltage */
 #define EC_MEMMAP_BATT_LFCC        0x58 /* Battery Last Full Charge Capacity */
@@ -103,10 +105,19 @@
 /* Unused 0x84 - 0x8f */
 #define EC_MEMMAP_ACC_STATUS       0x90 /* Accelerometer status (8 bits )*/
 /* Unused 0x91 */
-#define EC_MEMMAP_ACC_DATA         0x92 /* Accelerometer data 0x92 - 0x9f */
+#define EC_MEMMAP_ACC_DATA         0x92 /* Accelerometers data 0x92 - 0x9f */
+/* 0x92: Lid Angle if available, LID_ANGLE_UNRELIABLE otherwise */
+/* 0x94 - 0x99: 1st Accelerometer */
+/* 0x9a - 0x9f: 2nd Accelerometer */
 #define EC_MEMMAP_GYRO_DATA        0xa0 /* Gyroscope data 0xa0 - 0xa5 */
-/* Unused 0xa6 - 0xfe (remember, 0xff is NOT part of the memmap region) */
+/* Unused 0xa6 - 0xdf */
 
+/*
+ * ACPI is unable to access memory mapped data at or above this offset due to
+ * limitations of the ACPI protocol. Do not place data in the range 0xe0 - 0xfe
+ * which might be needed by ACPI.
+ */
+#define EC_MEMMAP_NO_ACPI 0xe0
 
 /* Define the format of the accelerometer mapped memory status byte. */
 #define EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK  0x0f
@@ -155,6 +166,8 @@
 #define EC_BATT_FLAG_DISCHARGING  0x04
 #define EC_BATT_FLAG_CHARGING     0x08
 #define EC_BATT_FLAG_LEVEL_CRITICAL 0x10
+/* Set if some of the static/dynamic data is invalid (or outdated). */
+#define EC_BATT_FLAG_INVALID_DATA 0x20
 
 /* Switch flags at EC_MEMMAP_SWITCHES */
 #define EC_SWITCH_LID_OPEN               0x01
@@ -180,12 +193,200 @@
 #define EC_WIRELESS_SWITCH_WWAN       0x04  /* WWAN power */
 #define EC_WIRELESS_SWITCH_WLAN_POWER 0x08  /* WLAN power */
 
+/*****************************************************************************/
+/*
+ * ACPI commands
+ *
+ * These are valid ONLY on the ACPI command/data port.
+ */
+
+/*
+ * ACPI Read Embedded Controller
+ *
+ * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*).
+ *
+ * Use the following sequence:
+ *
+ *    - Write EC_CMD_ACPI_READ to EC_LPC_ADDR_ACPI_CMD
+ *    - Wait for EC_LPC_CMDR_PENDING bit to clear
+ *    - Write address to EC_LPC_ADDR_ACPI_DATA
+ *    - Wait for EC_LPC_CMDR_DATA bit to set
+ *    - Read value from EC_LPC_ADDR_ACPI_DATA
+ */
+#define EC_CMD_ACPI_READ 0x0080
+
+/*
+ * ACPI Write Embedded Controller
+ *
+ * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*).
+ *
+ * Use the following sequence:
+ *
+ *    - Write EC_CMD_ACPI_WRITE to EC_LPC_ADDR_ACPI_CMD
+ *    - Wait for EC_LPC_CMDR_PENDING bit to clear
+ *    - Write address to EC_LPC_ADDR_ACPI_DATA
+ *    - Wait for EC_LPC_CMDR_PENDING bit to clear
+ *    - Write value to EC_LPC_ADDR_ACPI_DATA
+ */
+#define EC_CMD_ACPI_WRITE 0x0081
+
+/*
+ * ACPI Burst Enable Embedded Controller
+ *
+ * This enables burst mode on the EC to allow the host to issue several
+ * commands back-to-back. While in this mode, writes to mapped multi-byte
+ * data are locked out to ensure data consistency.
+ */
+#define EC_CMD_ACPI_BURST_ENABLE 0x0082
+
+/*
+ * ACPI Burst Disable Embedded Controller
+ *
+ * This disables burst mode on the EC and stops preventing EC writes to mapped
+ * multi-byte data.
+ */
+#define EC_CMD_ACPI_BURST_DISABLE 0x0083
+
+/*
+ * ACPI Query Embedded Controller
+ *
+ * This clears the lowest-order bit in the currently pending host events, and
+ * sets the result code to the 1-based index of the bit (event 0x00000001 = 1,
+ * event 0x80000000 = 32), or 0 if no event was pending.
+ */
+#define EC_CMD_ACPI_QUERY_EVENT 0x0084
+
+/* Valid addresses in ACPI memory space, for read/write commands */
+
+/* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */
+#define EC_ACPI_MEM_VERSION            0x00
+/*
+ * Test location; writing value here updates test compliment byte to (0xff -
+ * value).
+ */
+#define EC_ACPI_MEM_TEST               0x01
+/* Test compliment; writes here are ignored. */
+#define EC_ACPI_MEM_TEST_COMPLIMENT    0x02
+
+/* Keyboard backlight brightness percent (0 - 100) */
+#define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03
+/* DPTF Target Fan Duty (0-100, 0xff for auto/none) */
+#define EC_ACPI_MEM_FAN_DUTY           0x04
+
+/*
+ * DPTF temp thresholds. Any of the EC's temp sensors can have up to two
+ * independent thresholds attached to them. The current value of the ID
+ * register determines which sensor is affected by the THRESHOLD and COMMIT
+ * registers. The THRESHOLD register uses the same EC_TEMP_SENSOR_OFFSET scheme
+ * as the memory-mapped sensors. The COMMIT register applies those settings.
+ *
+ * The spec does not mandate any way to read back the threshold settings
+ * themselves, but when a threshold is crossed the AP needs a way to determine
+ * which sensor(s) are responsible. Each reading of the ID register clears and
+ * returns one sensor ID that has crossed one of its threshold (in either
+ * direction) since the last read. A value of 0xFF means "no new thresholds
+ * have tripped". Setting or enabling the thresholds for a sensor will clear
+ * the unread event count for that sensor.
+ */
+#define EC_ACPI_MEM_TEMP_ID            0x05
+#define EC_ACPI_MEM_TEMP_THRESHOLD     0x06
+#define EC_ACPI_MEM_TEMP_COMMIT        0x07
+/*
+ * Here are the bits for the COMMIT register:
+ *   bit 0 selects the threshold index for the chosen sensor (0/1)
+ *   bit 1 enables/disables the selected threshold (0 = off, 1 = on)
+ * Each write to the commit register affects one threshold.
+ */
+#define EC_ACPI_MEM_TEMP_COMMIT_SELECT_MASK BIT(0)
+#define EC_ACPI_MEM_TEMP_COMMIT_ENABLE_MASK BIT(1)
+/*
+ * Example:
+ *
+ * Set the thresholds for sensor 2 to 50 C and 60 C:
+ *   write 2 to [0x05]      --  select temp sensor 2
+ *   write 0x7b to [0x06]   --  C_TO_K(50) - EC_TEMP_SENSOR_OFFSET
+ *   write 0x2 to [0x07]    --  enable threshold 0 with this value
+ *   write 0x85 to [0x06]   --  C_TO_K(60) - EC_TEMP_SENSOR_OFFSET
+ *   write 0x3 to [0x07]    --  enable threshold 1 with this value
+ *
+ * Disable the 60 C threshold, leaving the 50 C threshold unchanged:
+ *   write 2 to [0x05]      --  select temp sensor 2
+ *   write 0x1 to [0x07]    --  disable threshold 1
+ */
+
+/* DPTF battery charging current limit */
+#define EC_ACPI_MEM_CHARGING_LIMIT     0x08
+
+/* Charging limit is specified in 64 mA steps */
+#define EC_ACPI_MEM_CHARGING_LIMIT_STEP_MA   64
+/* Value to disable DPTF battery charging limit */
+#define EC_ACPI_MEM_CHARGING_LIMIT_DISABLED  0xff
+
+/*
+ * Report device orientation
+ *  Bits       Definition
+ *  3:1        Device DPTF Profile Number (DDPN)
+ *               0   = Reserved for backward compatibility (indicates no valid
+ *                     profile number. Host should fall back to using TBMD).
+ *              1..7 = DPTF Profile number to indicate to host which table needs
+ *                     to be loaded.
+ *   0         Tablet Mode Device Indicator (TBMD)
+ */
+#define EC_ACPI_MEM_DEVICE_ORIENTATION 0x09
+#define EC_ACPI_MEM_TBMD_SHIFT         0
+#define EC_ACPI_MEM_TBMD_MASK          0x1
+#define EC_ACPI_MEM_DDPN_SHIFT         1
+#define EC_ACPI_MEM_DDPN_MASK          0x7
+
+/*
+ * Report device features. Uses the same format as the host command, except:
+ *
+ * bit 0 (EC_FEATURE_LIMITED) changes meaning from "EC code has a limited set
+ * of features", which is of limited interest when the system is already
+ * interpreting ACPI bytecode, to "EC_FEATURES[0-7] is not supported". Since
+ * these are supported, it defaults to 0.
+ * This allows detecting the presence of this field since older versions of
+ * the EC codebase would simply return 0xff to that unknown address. Check
+ * FEATURES0 != 0xff (or FEATURES0[0] == 0) to make sure that the other bits
+ * are valid.
+ */
+#define EC_ACPI_MEM_DEVICE_FEATURES0 0x0a
+#define EC_ACPI_MEM_DEVICE_FEATURES1 0x0b
+#define EC_ACPI_MEM_DEVICE_FEATURES2 0x0c
+#define EC_ACPI_MEM_DEVICE_FEATURES3 0x0d
+#define EC_ACPI_MEM_DEVICE_FEATURES4 0x0e
+#define EC_ACPI_MEM_DEVICE_FEATURES5 0x0f
+#define EC_ACPI_MEM_DEVICE_FEATURES6 0x10
+#define EC_ACPI_MEM_DEVICE_FEATURES7 0x11
+
+#define EC_ACPI_MEM_BATTERY_INDEX    0x12
+
+/*
+ * USB Port Power. Each bit indicates whether the corresponding USB ports' power
+ * is enabled (1) or disabled (0).
+ *   bit 0 USB port ID 0
+ *   ...
+ *   bit 7 USB port ID 7
+ */
+#define EC_ACPI_MEM_USB_PORT_POWER 0x13
+
+/*
+ * ACPI addresses 0x20 - 0xff map to EC_MEMMAP offset 0x00 - 0xdf.  This data
+ * is read-only from the AP.  Added in EC_ACPI_MEM_VERSION 2.
+ */
+#define EC_ACPI_MEM_MAPPED_BEGIN   0x20
+#define EC_ACPI_MEM_MAPPED_SIZE    0xe0
+
+/* Current version of ACPI memory address space */
+#define EC_ACPI_MEM_VERSION_CURRENT 2
+
+
 /*
  * This header file is used in coreboot both in C and ACPI code.  The ACPI code
  * is pre-processed to handle constants but the ASL compiler is unable to
  * handle actual C code so keep it separate.
  */
-#ifndef __ACPI__
+
 
 /*
  * Attributes for EC request and response packets.  Just defining __packed
@@ -238,7 +439,7 @@
 #define EC_LPC_STATUS_PROCESSING  0x04
 /* Last write to EC was a command, not data */
 #define EC_LPC_STATUS_LAST_CMD    0x08
-/* EC is in burst mode.  Unsupported by Chrome EC, so this bit is never set */
+/* EC is in burst mode */
 #define EC_LPC_STATUS_BURST_MODE  0x10
 /* SCI event is pending (requesting SCI query) */
 #define EC_LPC_STATUS_SCI_PENDING 0x20
@@ -2293,6 +2494,8 @@ struct ec_response_temp_sensor_get_info {
 /*****************************************************************************/
 /* Host event commands */
 
+
+/* Obsolete. New implementation should use EC_CMD_HOST_EVENT instead */
 /*
  * Host event mask params and response structures, shared by all of the host
  * event commands below.
@@ -2318,6 +2521,86 @@ struct ec_response_host_event_mask {
 #define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x008E
 #define EC_CMD_HOST_EVENT_CLEAR_B       0x008F
 
+/*
+ * Unified host event programming interface - Should be used by newer versions
+ * of BIOS/OS to program host events and masks
+ */
+
+struct ec_params_host_event {
+
+	/* Action requested by host - one of enum ec_host_event_action. */
+	uint8_t action;
+
+	/*
+	 * Mask type that the host requested the action on - one of
+	 * enum ec_host_event_mask_type.
+	 */
+	uint8_t mask_type;
+
+	/* Set to 0, ignore on read */
+	uint16_t reserved;
+
+	/* Value to be used in case of set operations. */
+	uint64_t value;
+} __ec_align4;
+
+/*
+ * Response structure returned by EC_CMD_HOST_EVENT.
+ * Update the value on a GET request. Set to 0 on GET/CLEAR
+ */
+
+struct ec_response_host_event {
+
+	/* Mask value in case of get operation */
+	uint64_t value;
+} __ec_align4;
+
+enum ec_host_event_action {
+	/*
+	 * params.value is ignored. Value of mask_type populated
+	 * in response.value
+	 */
+	EC_HOST_EVENT_GET,
+
+	/* Bits in params.value are set */
+	EC_HOST_EVENT_SET,
+
+	/* Bits in params.value are cleared */
+	EC_HOST_EVENT_CLEAR,
+};
+
+enum ec_host_event_mask_type {
+
+	/* Main host event copy */
+	EC_HOST_EVENT_MAIN,
+
+	/* Copy B of host events */
+	EC_HOST_EVENT_B,
+
+	/* SCI Mask */
+	EC_HOST_EVENT_SCI_MASK,
+
+	/* SMI Mask */
+	EC_HOST_EVENT_SMI_MASK,
+
+	/* Mask of events that should be always reported in hostevents */
+	EC_HOST_EVENT_ALWAYS_REPORT_MASK,
+
+	/* Active wake mask */
+	EC_HOST_EVENT_ACTIVE_WAKE_MASK,
+
+	/* Lazy wake mask for S0ix */
+	EC_HOST_EVENT_LAZY_WAKE_MASK_S0IX,
+
+	/* Lazy wake mask for S3 */
+	EC_HOST_EVENT_LAZY_WAKE_MASK_S3,
+
+	/* Lazy wake mask for S5 */
+	EC_HOST_EVENT_LAZY_WAKE_MASK_S5,
+};
+
+#define EC_CMD_HOST_EVENT       0x00A4
+
 /*****************************************************************************/
 /* Switch commands */
 
@@ -2969,122 +3252,6 @@ struct ec_params_reboot_ec {
  */
 #define EC_CMD_GET_PANIC_INFO 0x00D3
 
-/*****************************************************************************/
-/*
- * ACPI commands
- *
- * These are valid ONLY on the ACPI command/data port.
- */
-
-/*
- * ACPI Read Embedded Controller
- *
- * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*).
- *
- * Use the following sequence:
- *
- *    - Write EC_CMD_ACPI_READ to EC_LPC_ADDR_ACPI_CMD
- *    - Wait for EC_LPC_CMDR_PENDING bit to clear
- *    - Write address to EC_LPC_ADDR_ACPI_DATA
- *    - Wait for EC_LPC_CMDR_DATA bit to set
- *    - Read value from EC_LPC_ADDR_ACPI_DATA
- */
-#define EC_CMD_ACPI_READ 0x80
-
-/*
- * ACPI Write Embedded Controller
- *
- * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*).
- *
- * Use the following sequence:
- *
- *    - Write EC_CMD_ACPI_WRITE to EC_LPC_ADDR_ACPI_CMD
- *    - Wait for EC_LPC_CMDR_PENDING bit to clear
- *    - Write address to EC_LPC_ADDR_ACPI_DATA
- *    - Wait for EC_LPC_CMDR_PENDING bit to clear
- *    - Write value to EC_LPC_ADDR_ACPI_DATA
- */
-#define EC_CMD_ACPI_WRITE 0x81
-
-/*
- * ACPI Query Embedded Controller
- *
- * This clears the lowest-order bit in the currently pending host events, and
- * sets the result code to the 1-based index of the bit (event 0x00000001 = 1,
- * event 0x80000000 = 32), or 0 if no event was pending.
- */
-#define EC_CMD_ACPI_QUERY_EVENT 0x84
-
-/* Valid addresses in ACPI memory space, for read/write commands */
-
-/* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */
-#define EC_ACPI_MEM_VERSION            0x00
-/*
- * Test location; writing value here updates test compliment byte to (0xff -
- * value).
- */
-#define EC_ACPI_MEM_TEST               0x01
-/* Test compliment; writes here are ignored. */
-#define EC_ACPI_MEM_TEST_COMPLIMENT    0x02
-
-/* Keyboard backlight brightness percent (0 - 100) */
-#define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03
-/* DPTF Target Fan Duty (0-100, 0xff for auto/none) */
-#define EC_ACPI_MEM_FAN_DUTY           0x04
-
-/*
- * DPTF temp thresholds. Any of the EC's temp sensors can have up to two
- * independent thresholds attached to them. The current value of the ID
- * register determines which sensor is affected by the THRESHOLD and COMMIT
- * registers. The THRESHOLD register uses the same EC_TEMP_SENSOR_OFFSET scheme
- * as the memory-mapped sensors. The COMMIT register applies those settings.
- *
- * The spec does not mandate any way to read back the threshold settings
- * themselves, but when a threshold is crossed the AP needs a way to determine
- * which sensor(s) are responsible. Each reading of the ID register clears and
- * returns one sensor ID that has crossed one of its threshold (in either
- * direction) since the last read. A value of 0xFF means "no new thresholds
- * have tripped". Setting or enabling the thresholds for a sensor will clear
- * the unread event count for that sensor.
- */
-#define EC_ACPI_MEM_TEMP_ID            0x05
-#define EC_ACPI_MEM_TEMP_THRESHOLD     0x06
-#define EC_ACPI_MEM_TEMP_COMMIT        0x07
-/*
- * Here are the bits for the COMMIT register:
- *   bit 0 selects the threshold index for the chosen sensor (0/1)
- *   bit 1 enables/disables the selected threshold (0 = off, 1 = on)
- * Each write to the commit register affects one threshold.
- */
-#define EC_ACPI_MEM_TEMP_COMMIT_SELECT_MASK (1 << 0)
-#define EC_ACPI_MEM_TEMP_COMMIT_ENABLE_MASK (1 << 1)
-/*
- * Example:
- *
- * Set the thresholds for sensor 2 to 50 C and 60 C:
- *   write 2 to [0x05]      --  select temp sensor 2
- *   write 0x7b to [0x06]   --  C_TO_K(50) - EC_TEMP_SENSOR_OFFSET
- *   write 0x2 to [0x07]    --  enable threshold 0 with this value
- *   write 0x85 to [0x06]   --  C_TO_K(60) - EC_TEMP_SENSOR_OFFSET
- *   write 0x3 to [0x07]    --  enable threshold 1 with this value
- *
- * Disable the 60 C threshold, leaving the 50 C threshold unchanged:
- *   write 2 to [0x05]      --  select temp sensor 2
- *   write 0x1 to [0x07]    --  disable threshold 1
- */
-
-/* DPTF battery charging current limit */
-#define EC_ACPI_MEM_CHARGING_LIMIT     0x08
-
-/* Charging limit is specified in 64 mA steps */
-#define EC_ACPI_MEM_CHARGING_LIMIT_STEP_MA   64
-/* Value to disable DPTF battery charging limit */
-#define EC_ACPI_MEM_CHARGING_LIMIT_DISABLED  0xff
-
-/* Current version of ACPI memory address space */
-#define EC_ACPI_MEM_VERSION_CURRENT 1
-
-
 /*****************************************************************************/
 /*
  * HDMI CEC commands
@@ -3198,8 +3365,6 @@ enum mkbp_cec_event {
  */
 #define EC_CMD_VERSION0 0x00DC
 
-#endif  /* !__ACPI__ */
-
 /*****************************************************************************/
 /*
  * PD commands
@@ -3540,4 +3705,6 @@ struct ec_response_usb_pd_mux_info {
 #define EC_LPC_ADDR_OLD_PARAM   EC_HOST_CMD_REGION1
 #define EC_OLD_PARAM_SIZE       EC_HOST_CMD_REGION_SIZE
 
+
+
 #endif  /* __CROS_EC_COMMANDS_H */
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 08/30] mfd: cros_ec: move HDMI CEC API definition
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (6 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 07/30] mfd: cros_ec: Update ACPI interface definition Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 09/30] mfd: cros_ec: Remove zero-size structs Gwendal Grignou
                   ` (22 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Move near the end of file.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 148 ++++++++++++++-------------
 1 file changed, 75 insertions(+), 73 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 6538c5789c43..67e15c29e083 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -3124,6 +3124,81 @@ struct ec_response_battery_vendor_param {
 } __ec_align4;
 
 /*****************************************************************************/
+/*
+ * HDMI CEC commands
+ *
+ * These commands are for sending and receiving message via HDMI CEC
+ */
+
+#define MAX_CEC_MSG_LEN 16
+
+/* CEC message from the AP to be written on the CEC bus */
+#define EC_CMD_CEC_WRITE_MSG 0x00B8
+
+/**
+ * struct ec_params_cec_write - Message to write to the CEC bus
+ * @msg: message content to write to the CEC bus
+ */
+struct ec_params_cec_write {
+	uint8_t msg[MAX_CEC_MSG_LEN];
+} __ec_align1;
+
+/* Set various CEC parameters */
+#define EC_CMD_CEC_SET 0x00BA
+
+/**
+ * struct ec_params_cec_set - CEC parameters set
+ * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS
+ * @val: in case cmd is CEC_CMD_ENABLE, this field can be 0 to disable CEC
+ *	or 1 to enable CEC functionality, in case cmd is
+ *	CEC_CMD_LOGICAL_ADDRESS, this field encodes the requested logical
+ *	address between 0 and 15 or 0xff to unregister
+ */
+struct ec_params_cec_set {
+	uint8_t cmd; /* enum cec_command */
+	uint8_t val;
+} __ec_align1;
+
+/* Read various CEC parameters */
+#define EC_CMD_CEC_GET 0x00BB
+
+/**
+ * struct ec_params_cec_get - CEC parameters get
+ * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS
+ */
+struct ec_params_cec_get {
+	uint8_t cmd; /* enum cec_command */
+} __ec_align1;
+
+/**
+ * struct ec_response_cec_get - CEC parameters get response
+ * @val: in case cmd was CEC_CMD_ENABLE, this field will 0 if CEC is
+ *	disabled or 1 if CEC functionality is enabled,
+ *	in case cmd was CEC_CMD_LOGICAL_ADDRESS, this will encode the
+ *	configured logical address between 0 and 15 or 0xff if unregistered
+ */
+struct ec_response_cec_get {
+	uint8_t val;
+} __ec_align1;
+
+/* CEC parameters command */
+enum cec_command {
+	/* CEC reading, writing and events enable */
+	CEC_CMD_ENABLE,
+	/* CEC logical address  */
+	CEC_CMD_LOGICAL_ADDRESS,
+};
+
+/* Events from CEC to AP */
+enum mkbp_cec_event {
+	/* Outgoing message was acknowledged by a follower */
+	EC_MKBP_CEC_SEND_OK			= BIT(0),
+	/* Outgoing message was not acknowledged */
+	EC_MKBP_CEC_SEND_FAILED			= BIT(1),
+};
+
+/*****************************************************************************/
+
 /* Commands for I2S recording on audio codec. */
 
 #define EC_CMD_CODEC_I2S 0x00BC
@@ -3252,79 +3327,6 @@ struct ec_params_reboot_ec {
  */
 #define EC_CMD_GET_PANIC_INFO 0x00D3
 
-/*****************************************************************************/
-/*
- * HDMI CEC commands
- *
- * These commands are for sending and receiving message via HDMI CEC
- */
-#define EC_MAX_CEC_MSG_LEN 16
-
-/* CEC message from the AP to be written on the CEC bus */
-#define EC_CMD_CEC_WRITE_MSG 0x00B8
-
-/**
- * struct ec_params_cec_write - Message to write to the CEC bus
- * @msg: message content to write to the CEC bus
- */
-struct ec_params_cec_write {
-	uint8_t msg[EC_MAX_CEC_MSG_LEN];
-} __ec_align1;
-
-/* Set various CEC parameters */
-#define EC_CMD_CEC_SET 0x00BA
-
-/**
- * struct ec_params_cec_set - CEC parameters set
- * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS
- * @val: in case cmd is CEC_CMD_ENABLE, this field can be 0 to disable CEC
- *	or 1 to enable CEC functionality, in case cmd is CEC_CMD_LOGICAL_ADDRESS,
- *	this field encodes the requested logical address between 0 and 15
- *	or 0xff to unregister
- */
-struct ec_params_cec_set {
-	uint8_t cmd; /* enum cec_command */
-	uint8_t val;
-} __ec_align1;
-
-/* Read various CEC parameters */
-#define EC_CMD_CEC_GET 0x00BB
-
-/**
- * struct ec_params_cec_get - CEC parameters get
- * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS
- */
-struct ec_params_cec_get {
-	uint8_t cmd; /* enum cec_command */
-} __ec_align1;
-
-/**
- * struct ec_response_cec_get - CEC parameters get response
- * @val: in case cmd was CEC_CMD_ENABLE, this field will 0 if CEC is
- *	disabled or 1 if CEC functionality is enabled,
- *	in case cmd was CEC_CMD_LOGICAL_ADDRESS, this will encode the
- *	configured logical address between 0 and 15 or 0xff if unregistered
- */
-struct ec_response_cec_get {
-	uint8_t val;
-} __ec_align1;
-
-/* CEC parameters command */
-enum ec_cec_command {
-	/* CEC reading, writing and events enable */
-	CEC_CMD_ENABLE,
-	/* CEC logical address  */
-	CEC_CMD_LOGICAL_ADDRESS,
-};
-
-/* Events from CEC to AP */
-enum mkbp_cec_event {
-	/* Outgoing message was acknowledged by a follower */
-	EC_MKBP_CEC_SEND_OK			= BIT(0),
-	/* Outgoing message was not acknowledged */
-	EC_MKBP_CEC_SEND_FAILED			= BIT(1),
-};
-
 /*****************************************************************************/
 /*
  * Special commands
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 09/30] mfd: cros_ec: Remove zero-size structs
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (7 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 08/30] mfd: cros_ec: move HDMI CEC API definition Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 10/30] mfd: cros_ec: Add Flash V2 commands API Gwendal Grignou
                   ` (21 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Empty structure size is different between C and C++.
To prevent clang warning when compiling this include file in C++
programs, remove empty structures.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 33 +++++++++++++++-------------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 67e15c29e083..2e5c93d858d8 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -1510,10 +1510,14 @@ struct lightbar_program {
 struct ec_params_lightbar {
 	uint8_t cmd;		      /* Command (see enum lightbar_command) */
 	union {
-		struct {
-			/* no args */
-		} dump, off, on, init, get_seq, get_params_v0, get_params_v1,
-			version, get_brightness, get_demo, suspend, resume;
+		/*
+		 * The following commands have no args:
+		 *
+		 * dump, off, on, init, get_seq, get_params_v0, get_params_v1,
+		 * version, get_brightness, get_demo, suspend, resume
+		 *
+		 * Don't use an empty struct, because C++ hates that.
+		 */
 
 		struct __ec_todo_unpacked {
 			uint8_t num;
@@ -1567,11 +1571,13 @@ struct ec_response_lightbar {
 			uint8_t red, green, blue;
 		} get_rgb;
 
-		struct {
-			/* no return params */
-		} off, on, init, set_brightness, seq, reg, set_rgb,
-			demo, set_params_v0, set_params_v1,
-			set_program, manual_suspend_ctrl, suspend, resume;
+		/*
+		 * The following commands have no response:
+		 *
+		 * off, on, init, set_brightness, seq, reg, set_rgb,
+		 * set_params_v0, set_params_v1, set_program,
+		 * manual_suspend_ctrl, suspend, resume
+		 */
 	};
 } __ec_todo_packed;
 
@@ -2991,9 +2997,7 @@ enum charge_state_params {
 struct ec_params_charge_state {
 	uint8_t cmd;				/* enum charge_state_command */
 	union {
-		struct {
-			/* no args */
-		} get_state;
+		/* get_state has no args */
 
 		struct __ec_todo_unpacked {
 			uint32_t param;		/* enum charge_state_param */
@@ -3019,9 +3023,8 @@ struct ec_response_charge_state {
 		struct __ec_align4 {
 			uint32_t value;
 		} get_param;
-		struct {
-			/* no return values */
-		} set_param;
+
+		/* set_param returns no args */
 	};
 } __ec_align4;
 
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 10/30] mfd: cros_ec: Add Flash V2 commands API
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (8 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 09/30] mfd: cros_ec: Remove zero-size structs Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 11/30] mfd: cros_ec: Add PWM_SET_DUTY API Gwendal Grignou
                   ` (20 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Added for supporting larger embedded controller flash.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 150 ++++++++++++++++++++++++++-
 1 file changed, 147 insertions(+), 3 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 2e5c93d858d8..393c5abab7a0 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -1108,6 +1108,7 @@ struct ec_response_get_features {
 
 /* Get flash info */
 #define EC_CMD_FLASH_INFO 0x0010
+#define EC_VER_FLASH_INFO 2
 
 /**
  * struct ec_response_flash_info - Response to the flash info command.
@@ -1134,6 +1135,15 @@ struct ec_response_flash_info {
  */
 #define EC_FLASH_INFO_ERASE_TO_0 BIT(0)
 
+/*
+ * Flash must be selected for read/write/erase operations to succeed.  This may
+ * be necessary on a chip where write/erase can be corrupted by other board
+ * activity, or where the chip needs to enable some sort of programming voltage,
+ * or where the read/write/erase operations require cleanly suspending other
+ * chip functionality.
+ */
+#define EC_FLASH_INFO_SELECT_REQUIRED BIT(1)
+
 /**
  * struct ec_response_flash_info_1 - Response to the flash info v1 command.
  * @flash_size: Usable flash size in bytes.
@@ -1156,6 +1166,12 @@ struct ec_response_flash_info {
  * gcc anonymous structs don't seem to get along with the __packed directive;
  * if they did we'd define the version 0 structure as a sub-structure of this
  * one.
+ *
+ * Version 2 supports flash banks of different sizes:
+ * The caller specified the number of banks it has preallocated
+ * (num_banks_desc)
+ * The EC returns the number of banks describing the flash memory.
+ * It adds banks descriptions up to num_banks_desc.
  */
 struct ec_response_flash_info_1 {
 	/* Version 0 fields; see above for description */
@@ -1169,6 +1185,42 @@ struct ec_response_flash_info_1 {
 	uint32_t flags;
 } __ec_align4;
 
+struct ec_params_flash_info_2 {
+	/* Number of banks to describe */
+	uint16_t num_banks_desc;
+	/* Reserved; set 0; ignore on read */
+	uint8_t reserved[2];
+} __ec_align4;
+
+struct ec_flash_bank {
+	/* Number of sector is in this bank. */
+	uint16_t count;
+	/* Size in power of 2 of each sector (8 --> 256 bytes) */
+	uint8_t size_exp;
+	/* Minimal write size for the sectors in this bank */
+	uint8_t write_size_exp;
+	/* Erase size for the sectors in this bank */
+	uint8_t erase_size_exp;
+	/* Size for write protection, usually identical to erase size. */
+	uint8_t protect_size_exp;
+	/* Reserved; set 0; ignore on read */
+	uint8_t reserved[2];
+};
+
+struct ec_response_flash_info_2 {
+	/* Total flash in the EC. */
+	uint32_t flash_size;
+	/* Flags; see EC_FLASH_INFO_* */
+	uint32_t flags;
+	/* Maximum size to use to send data to write to the EC. */
+	uint32_t write_ideal_size;
+	/* Number of banks present in the EC. */
+	uint16_t num_banks_total;
+	/* Number of banks described in banks array. */
+	uint16_t num_banks_desc;
+	struct ec_flash_bank banks[0];
+} __ec_align4;
+
 /*
  * Read flash
  *
@@ -1208,7 +1260,7 @@ struct ec_params_flash_write {
 #define EC_CMD_FLASH_ERASE 0x0013
 
 /**
- * struct ec_params_flash_erase - Parameters for the flash erase command.
+ * struct ec_params_flash_erase - Parameters for the flash erase command, v0.
  * @offset: Byte offset to erase.
  * @size: Size to erase in bytes.
  */
@@ -1217,6 +1269,43 @@ struct ec_params_flash_erase {
 	uint32_t size;
 } __ec_align4;
 
+/*
+ * v1 add async erase:
+ * subcommands can returns:
+ * EC_RES_SUCCESS : erased (see ERASE_SECTOR_ASYNC case below).
+ * EC_RES_INVALID_PARAM : offset/size are not aligned on a erase boundary.
+ * EC_RES_ERROR : other errors.
+ * EC_RES_BUSY : an existing erase operation is in progress.
+ * EC_RES_ACCESS_DENIED: Trying to erase running image.
+ *
+ * When ERASE_SECTOR_ASYNC returns EC_RES_SUCCESS, the operation is just
+ * properly queued. The user must call ERASE_GET_RESULT subcommand to get
+ * the proper result.
+ * When ERASE_GET_RESULT returns EC_RES_BUSY, the caller must wait and send
+ * ERASE_GET_RESULT again to get the result of ERASE_SECTOR_ASYNC.
+ * ERASE_GET_RESULT command may timeout on EC where flash access is not
+ * permitted while erasing. (For instance, STM32F4).
+ */
+enum ec_flash_erase_cmd {
+	FLASH_ERASE_SECTOR,     /* Erase and wait for result */
+	FLASH_ERASE_SECTOR_ASYNC,  /* Erase and return immediately. */
+	FLASH_ERASE_GET_RESULT,  /* Ask for last erase result */
+};
+
+/**
+ * struct ec_params_flash_erase_v1 - Parameters for the flash erase command, v1.
+ * @cmd: One of ec_flash_erase_cmd.
+ * @reserved: Pad byte; currently always contains 0.
+ * @flag: No flags defined yet; set to 0.
+ * @params: Same as v0 parameters.
+ */
+struct ec_params_flash_erase_v1 {
+	uint8_t  cmd;
+	uint8_t  reserved;
+	uint16_t flag;
+	struct ec_params_flash_erase params;
+} __ec_align4;
+
 /*
  * Get/set flash protection.
  *
@@ -1252,6 +1341,15 @@ struct ec_params_flash_erase {
 #define EC_FLASH_PROTECT_ERROR_INCONSISTENT BIT(5)
 /* Entire flash code protected when the EC boots */
 #define EC_FLASH_PROTECT_ALL_AT_BOOT        BIT(6)
+/* RW flash code protected when the EC boots */
+#define EC_FLASH_PROTECT_RW_AT_BOOT         BIT(7)
+/* RW flash code protected now. */
+#define EC_FLASH_PROTECT_RW_NOW             BIT(8)
+/* Rollback information flash region protected when the EC boots */
+#define EC_FLASH_PROTECT_ROLLBACK_AT_BOOT   BIT(9)
+/* Rollback information flash region protected now */
+#define EC_FLASH_PROTECT_ROLLBACK_NOW       BIT(10)
+
 
 /**
  * struct ec_params_flash_protect - Parameters for the flash protect command.
@@ -1290,16 +1388,31 @@ struct ec_response_flash_protect {
 enum ec_flash_region {
 	/* Region which holds read-only EC image */
 	EC_FLASH_REGION_RO = 0,
-	/* Region which holds rewritable EC image */
-	EC_FLASH_REGION_RW,
+	/*
+	 * Region which holds active RW image. 'Active' is different from
+	 * 'running'. Active means 'scheduled-to-run'. Since RO image always
+	 * scheduled to run, active/non-active applies only to RW images (for
+	 * the same reason 'update' applies only to RW images. It's a state of
+	 * an image on a flash. Running image can be RO, RW_A, RW_B but active
+	 * image can only be RW_A or RW_B. In recovery mode, an active RW image
+	 * doesn't enter 'running' state but it's still active on a flash.
+	 */
+	EC_FLASH_REGION_ACTIVE,
 	/*
 	 * Region which should be write-protected in the factory (a superset of
 	 * EC_FLASH_REGION_RO)
 	 */
 	EC_FLASH_REGION_WP_RO,
+	/* Region which holds updatable (non-active) RW image */
+	EC_FLASH_REGION_UPDATE,
 	/* Number of regions */
 	EC_FLASH_REGION_COUNT,
 };
+/*
+ * 'RW' is vague if there are multiple RW images; we mean the active one,
+ * so the old constant is deprecated.
+ */
+#define EC_FLASH_REGION_RW EC_FLASH_REGION_ACTIVE
 
 /**
  * struct ec_params_flash_region_info - Parameters for the flash region info
@@ -1334,6 +1447,37 @@ struct ec_response_vbnvcontext {
 	uint8_t block[EC_VBNV_BLOCK_SIZE];
 } __ec_align4;
 
+
+/* Get SPI flash information */
+#define EC_CMD_FLASH_SPI_INFO 0x0018
+
+struct ec_response_flash_spi_info {
+	/* JEDEC info from command 0x9F (manufacturer, memory type, size) */
+	uint8_t jedec[3];
+
+	/* Pad byte; currently always contains 0 */
+	uint8_t reserved0;
+
+	/* Manufacturer / device ID from command 0x90 */
+	uint8_t mfr_dev_id[2];
+
+	/* Status registers from command 0x05 and 0x35 */
+	uint8_t sr1, sr2;
+} __ec_align1;
+
+
+/* Select flash during flash operations */
+#define EC_CMD_FLASH_SELECT 0x0019
+
+/**
+ * struct ec_params_flash_select - Parameters for the flash select command.
+ * @select: 1 to select flash, 0 to deselect flash
+ */
+struct ec_params_flash_select {
+	uint8_t select;
+} __ec_align4;
+
+
 /*****************************************************************************/
 /* PWM commands */
 
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 11/30] mfd: cros_ec: Add PWM_SET_DUTY API
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (9 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 10/30] mfd: cros_ec: Add Flash V2 commands API Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 12/30] mfd: cros_ec: Add lightbar v2 API Gwendal Grignou
                   ` (19 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Add API for fan control.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 393c5abab7a0..5747bbcfa45f 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -1491,11 +1491,19 @@ struct ec_response_pwm_get_fan_rpm {
 /* Set target fan RPM */
 #define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x0021
 
-struct ec_params_pwm_set_fan_target_rpm {
+/* Version 0 of input params */
+struct ec_params_pwm_set_fan_target_rpm_v0 {
 	uint32_t rpm;
+} __ec_align4;
+
+/* Version 1 of input params */
+struct ec_params_pwm_set_fan_target_rpm_v1 {
+	uint32_t rpm;
+	uint8_t fan_idx;
 } __ec_align_size1;
 
 /* Get keyboard backlight */
+/* OBSOLETE - Use EC_CMD_PWM_SET_DUTY */
 #define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x0022
 
 struct ec_response_pwm_get_keyboard_backlight {
@@ -1504,6 +1512,7 @@ struct ec_response_pwm_get_keyboard_backlight {
 } __ec_align1;
 
 /* Set keyboard backlight */
+/* OBSOLETE - Use EC_CMD_PWM_SET_DUTY */
 #define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x0023
 
 struct ec_params_pwm_set_keyboard_backlight {
@@ -1513,10 +1522,17 @@ struct ec_params_pwm_set_keyboard_backlight {
 /* Set target fan PWM duty cycle */
 #define EC_CMD_PWM_SET_FAN_DUTY 0x0024
 
-struct ec_params_pwm_set_fan_duty {
+/* Version 0 of input params */
+struct ec_params_pwm_set_fan_duty_v0 {
 	uint32_t percent;
 } __ec_align4;
 
+/* Version 1 of input params */
+struct ec_params_pwm_set_fan_duty_v1 {
+	uint32_t percent;
+	uint8_t fan_idx;
+} __ec_align_size1;
+
 #define EC_CMD_PWM_SET_DUTY 0x0025
 /* 16 bit duty cycle, 0xffff = 100% */
 #define EC_PWM_MAX_DUTY 0xffff
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 12/30] mfd: cros_ec: Add lightbar v2 API
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (10 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 11/30] mfd: cros_ec: Add PWM_SET_DUTY API Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 13/30] mfd: cros_ec: Expand hash API Gwendal Grignou
                   ` (18 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

New API split commands, improve EC command latency.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 124 ++++++++++++++++++++++++++-
 1 file changed, 120 insertions(+), 4 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 5747bbcfa45f..d55f155eb735 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -1628,7 +1628,10 @@ struct lightbar_params_v1 {
 	int32_t s3_sleep_for;
 	int32_t s3_ramp_up;
 	int32_t s3_ramp_down;
+	int32_t s5_ramp_up;
+	int32_t s5_ramp_down;
 	int32_t tap_tick_delay;
+	int32_t tap_gate_delay;
 	int32_t tap_display_time;
 
 	/* Tap-for-battery params */
@@ -1656,11 +1659,82 @@ struct lightbar_params_v1 {
 	uint8_t s0_idx[2][LB_BATTERY_LEVELS];	/* AP is running */
 	uint8_t s3_idx[2][LB_BATTERY_LEVELS];	/* AP is sleeping */
 
+	/* s5: single color pulse on inhibited power-up */
+	uint8_t s5_idx;
+
 	/* Color palette */
 	struct rgb_s color[8];			/* 0-3 are Google colors */
 } __ec_todo_packed;
 
-/* Lightbar program */
+/* Lightbar command params v2
+ * crbug.com/467716
+ *
+ * lightbar_parms_v1 was too big for i2c, therefore in v2, we split them up by
+ * logical groups to make it more manageable ( < 120 bytes).
+ *
+ * NOTE: Each of these groups must be less than 120 bytes.
+ */
+
+struct lightbar_params_v2_timing {
+	/* Timing */
+	int32_t google_ramp_up;
+	int32_t google_ramp_down;
+	int32_t s3s0_ramp_up;
+	int32_t s0_tick_delay[2];		/* AC=0/1 */
+	int32_t s0a_tick_delay[2];		/* AC=0/1 */
+	int32_t s0s3_ramp_down;
+	int32_t s3_sleep_for;
+	int32_t s3_ramp_up;
+	int32_t s3_ramp_down;
+	int32_t s5_ramp_up;
+	int32_t s5_ramp_down;
+	int32_t tap_tick_delay;
+	int32_t tap_gate_delay;
+	int32_t tap_display_time;
+} __ec_todo_packed;
+
+struct lightbar_params_v2_tap {
+	/* Tap-for-battery params */
+	uint8_t tap_pct_red;
+	uint8_t tap_pct_green;
+	uint8_t tap_seg_min_on;
+	uint8_t tap_seg_max_on;
+	uint8_t tap_seg_osc;
+	uint8_t tap_idx[3];
+} __ec_todo_packed;
+
+struct lightbar_params_v2_oscillation {
+	/* Oscillation */
+	uint8_t osc_min[2];			/* AC=0/1 */
+	uint8_t osc_max[2];			/* AC=0/1 */
+	uint8_t w_ofs[2];			/* AC=0/1 */
+} __ec_todo_packed;
+
+struct lightbar_params_v2_brightness {
+	/* Brightness limits based on the backlight and AC. */
+	uint8_t bright_bl_off_fixed[2];		/* AC=0/1 */
+	uint8_t bright_bl_on_min[2];		/* AC=0/1 */
+	uint8_t bright_bl_on_max[2];		/* AC=0/1 */
+} __ec_todo_packed;
+
+struct lightbar_params_v2_thresholds {
+	/* Battery level thresholds */
+	uint8_t battery_threshold[LB_BATTERY_LEVELS - 1];
+} __ec_todo_packed;
+
+struct lightbar_params_v2_colors {
+	/* Map [AC][battery_level] to color index */
+	uint8_t s0_idx[2][LB_BATTERY_LEVELS];	/* AP is running */
+	uint8_t s3_idx[2][LB_BATTERY_LEVELS];	/* AP is sleeping */
+
+	/* s5: single color pulse on inhibited power-up */
+	uint8_t s5_idx;
+
+	/* Color palette */
+	struct rgb_s color[8];			/* 0-3 are Google colors */
+} __ec_todo_packed;
+
+/* Lightbar program. */
 #define EC_LB_PROG_LEN 192
 struct lightbar_program {
 	uint8_t size;
@@ -1674,7 +1748,10 @@ struct ec_params_lightbar {
 		 * The following commands have no args:
 		 *
 		 * dump, off, on, init, get_seq, get_params_v0, get_params_v1,
-		 * version, get_brightness, get_demo, suspend, resume
+		 * version, get_brightness, get_demo, suspend, resume,
+		 * get_params_v2_timing, get_params_v2_tap, get_params_v2_osc,
+		 * get_params_v2_bright, get_params_v2_thlds,
+		 * get_params_v2_colors
 		 *
 		 * Don't use an empty struct, because C++ hates that.
 		 */
@@ -1701,6 +1778,14 @@ struct ec_params_lightbar {
 
 		struct lightbar_params_v0 set_params_v0;
 		struct lightbar_params_v1 set_params_v1;
+
+		struct lightbar_params_v2_timing set_v2par_timing;
+		struct lightbar_params_v2_tap set_v2par_tap;
+		struct lightbar_params_v2_oscillation set_v2par_osc;
+		struct lightbar_params_v2_brightness set_v2par_bright;
+		struct lightbar_params_v2_thresholds set_v2par_thlds;
+		struct lightbar_params_v2_colors set_v2par_colors;
+
 		struct lightbar_program set_program;
 	};
 } __ec_todo_packed;
@@ -1722,6 +1807,14 @@ struct ec_response_lightbar {
 		struct lightbar_params_v0 get_params_v0;
 		struct lightbar_params_v1 get_params_v1;
 
+
+		struct lightbar_params_v2_timing get_params_v2_timing;
+		struct lightbar_params_v2_tap get_params_v2_tap;
+		struct lightbar_params_v2_oscillation get_params_v2_osc;
+		struct lightbar_params_v2_brightness get_params_v2_bright;
+		struct lightbar_params_v2_thresholds get_params_v2_thlds;
+		struct lightbar_params_v2_colors get_params_v2_colors;
+
 		struct __ec_todo_unpacked {
 			uint32_t num;
 			uint32_t flags;
@@ -1734,9 +1827,11 @@ struct ec_response_lightbar {
 		/*
 		 * The following commands have no response:
 		 *
-		 * off, on, init, set_brightness, seq, reg, set_rgb,
+		 * off, on, init, set_brightness, seq, reg, set_rgb, demo,
 		 * set_params_v0, set_params_v1, set_program,
-		 * manual_suspend_ctrl, suspend, resume
+		 * manual_suspend_ctrl, suspend, resume, set_v2par_timing,
+		 * set_v2par_tap, set_v2par_osc, set_v2par_bright,
+		 * set_v2par_thlds, set_v2par_colors
 		 */
 	};
 } __ec_todo_packed;
@@ -1765,6 +1860,18 @@ enum lightbar_command {
 	LIGHTBAR_CMD_MANUAL_SUSPEND_CTRL = 19,
 	LIGHTBAR_CMD_SUSPEND = 20,
 	LIGHTBAR_CMD_RESUME = 21,
+	LIGHTBAR_CMD_GET_PARAMS_V2_TIMING = 22,
+	LIGHTBAR_CMD_SET_PARAMS_V2_TIMING = 23,
+	LIGHTBAR_CMD_GET_PARAMS_V2_TAP = 24,
+	LIGHTBAR_CMD_SET_PARAMS_V2_TAP = 25,
+	LIGHTBAR_CMD_GET_PARAMS_V2_OSCILLATION = 26,
+	LIGHTBAR_CMD_SET_PARAMS_V2_OSCILLATION = 27,
+	LIGHTBAR_CMD_GET_PARAMS_V2_BRIGHTNESS = 28,
+	LIGHTBAR_CMD_SET_PARAMS_V2_BRIGHTNESS = 29,
+	LIGHTBAR_CMD_GET_PARAMS_V2_THRESHOLDS = 30,
+	LIGHTBAR_CMD_SET_PARAMS_V2_THRESHOLDS = 31,
+	LIGHTBAR_CMD_GET_PARAMS_V2_COLORS = 32,
+	LIGHTBAR_CMD_SET_PARAMS_V2_COLORS = 33,
 	LIGHTBAR_NUM_CMDS
 };
 
@@ -1783,6 +1890,14 @@ enum ec_led_id {
 	EC_LED_ID_POWER_LED,
 	/* LED on power adapter or its plug */
 	EC_LED_ID_ADAPTER_LED,
+	/* LED to indicate left side */
+	EC_LED_ID_LEFT_LED,
+	/* LED to indicate right side */
+	EC_LED_ID_RIGHT_LED,
+	/* LED to indicate recovery mode with HW_REINIT */
+	EC_LED_ID_RECOVERY_HW_REINIT_LED,
+	/* LED to indicate sysrq debug mode. */
+	EC_LED_ID_SYSRQ_DEBUG_LED,
 
 	EC_LED_ID_COUNT
 };
@@ -1797,6 +1912,7 @@ enum ec_led_colors {
 	EC_LED_COLOR_BLUE,
 	EC_LED_COLOR_YELLOW,
 	EC_LED_COLOR_WHITE,
+	EC_LED_COLOR_AMBER,
 
 	EC_LED_COLOR_COUNT
 };
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 13/30] mfd: cros_ec: Expand hash API
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (11 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 12/30] mfd: cros_ec: Add lightbar v2 API Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 14/30] mfd: cros_ec: Add EC transport protocol v4 Gwendal Grignou
                   ` (17 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Improve API to verify EC image signature.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index d55f155eb735..29a996832af0 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -1988,8 +1988,15 @@ enum ec_vboot_hash_status {
  * If one of these is specified, the EC will automatically update offset and
  * size to the correct values for the specified image (RO or RW).
  */
-#define EC_VBOOT_HASH_OFFSET_RO 0xfffffffe
-#define EC_VBOOT_HASH_OFFSET_RW 0xfffffffd
+#define EC_VBOOT_HASH_OFFSET_RO		0xfffffffe
+#define EC_VBOOT_HASH_OFFSET_ACTIVE	0xfffffffd
+#define EC_VBOOT_HASH_OFFSET_UPDATE	0xfffffffc
+
+/*
+ * 'RW' is vague if there are multiple RW images; we mean the active one,
+ * so the old constant is deprecated.
+ */
+#define EC_VBOOT_HASH_OFFSET_RW EC_VBOOT_HASH_OFFSET_ACTIVE
 
 /*****************************************************************************/
 /*
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 14/30] mfd: cros_ec: Add EC transport protocol v4
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (12 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 13/30] mfd: cros_ec: Expand hash API Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 15/30] mfd: cros_ec: Complete MEMS sensor API Gwendal Grignou
                   ` (16 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Introduce a new transport procotol between EC and host.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 143 ++++++++++++++++++++++++++-
 1 file changed, 141 insertions(+), 2 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 29a996832af0..48e753df7e2d 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -455,7 +455,10 @@
 #define EC_LPC_STATUS_BUSY_MASK \
 	(EC_LPC_STATUS_FROM_HOST | EC_LPC_STATUS_PROCESSING)
 
-/* Host command response codes */
+/*
+ * Host command response codes (16-bit).  Note that response codes should be
+ * stored in a uint16_t rather than directly in a value of this type.
+ */
 enum ec_status {
 	EC_RES_SUCCESS = 0,
 	EC_RES_INVALID_COMMAND = 1,
@@ -471,7 +474,13 @@ enum ec_status {
 	EC_RES_OVERFLOW = 11,		/* Table / data overflow */
 	EC_RES_INVALID_HEADER = 12,     /* Header contains invalid data */
 	EC_RES_REQUEST_TRUNCATED = 13,  /* Didn't get the entire request */
-	EC_RES_RESPONSE_TOO_BIG = 14    /* Response was too big to handle */
+	EC_RES_RESPONSE_TOO_BIG = 14,   /* Response was too big to handle */
+	EC_RES_BUS_ERROR = 15,		/* Communications bus error */
+	EC_RES_BUSY = 16,		/* Up but too busy.  Should retry */
+	EC_RES_INVALID_HEADER_VERSION = 17,  /* Header version invalid */
+	EC_RES_INVALID_HEADER_CRC = 18,      /* Header CRC invalid */
+	EC_RES_INVALID_DATA_CRC = 19,        /* Data CRC invalid */
+	EC_RES_DUP_UNAVAILABLE = 20,         /* Can't resend response */
 };
 
 /*
@@ -744,6 +753,136 @@ struct ec_host_response {
 	uint16_t reserved;
 } __ec_align4;
 
+/*****************************************************************************/
+
+/*
+ * Host command protocol V4.
+ *
+ * Packets always start with a request or response header.  They are followed
+ * by data_len bytes of data.  If the data_crc_present flag is set, the data
+ * bytes are followed by a CRC-8 of that data, using using x^8 + x^2 + x + 1
+ * polynomial.
+ *
+ * Host algorithm when sending a request q:
+ *
+ * 101) tries_left=(some value, e.g. 3);
+ * 102) q.seq_num++
+ * 103) q.seq_dup=0
+ * 104) Calculate q.header_crc.
+ * 105) Send request q to EC.
+ * 106) Wait for response r.  Go to 201 if received or 301 if timeout.
+ *
+ * 201) If r.struct_version != 4, go to 301.
+ * 202) If r.header_crc mismatches calculated CRC for r header, go to 301.
+ * 203) If r.data_crc_present and r.data_crc mismatches, go to 301.
+ * 204) If r.seq_num != q.seq_num, go to 301.
+ * 205) If r.seq_dup == q.seq_dup, return success.
+ * 207) If r.seq_dup == 1, go to 301.
+ * 208) Return error.
+ *
+ * 301) If --tries_left <= 0, return error.
+ * 302) If q.seq_dup == 1, go to 105.
+ * 303) q.seq_dup = 1
+ * 304) Go to 104.
+ *
+ * EC algorithm when receiving a request q.
+ * EC has response buffer r, error buffer e.
+ *
+ * 101) If q.struct_version != 4, set e.result = EC_RES_INVALID_HEADER_VERSION
+ *      and go to 301
+ * 102) If q.header_crc mismatches calculated CRC, set e.result =
+ *      EC_RES_INVALID_HEADER_CRC and go to 301
+ * 103) If q.data_crc_present, calculate data CRC.  If that mismatches the CRC
+ *      byte at the end of the packet, set e.result = EC_RES_INVALID_DATA_CRC
+ *      and go to 301.
+ * 104) If q.seq_dup == 0, go to 201.
+ * 105) If q.seq_num != r.seq_num, go to 201.
+ * 106) If q.seq_dup == r.seq_dup, go to 205, else go to 203.
+ *
+ * 201) Process request q into response r.
+ * 202) r.seq_num = q.seq_num
+ * 203) r.seq_dup = q.seq_dup
+ * 204) Calculate r.header_crc
+ * 205) If r.data_len > 0 and data is no longer available, set e.result =
+ *      EC_RES_DUP_UNAVAILABLE and go to 301.
+ * 206) Send response r.
+ *
+ * 301) e.seq_num = q.seq_num
+ * 302) e.seq_dup = q.seq_dup
+ * 303) Calculate e.header_crc.
+ * 304) Send error response e.
+ */
+
+/* Version 4 request from host */
+struct ec_host_request4 {
+	/*
+	 * bits 0-3: struct_version: Structure version (=4)
+	 * bit    4: is_response: Is response (=0)
+	 * bits 5-6: seq_num: Sequence number
+	 * bit    7: seq_dup: Sequence duplicate flag
+	 */
+	uint8_t fields0;
+
+	/*
+	 * bits 0-4: command_version: Command version
+	 * bits 5-6: Reserved (set 0, ignore on read)
+	 * bit    7: data_crc_present: Is data CRC present after data
+	 */
+	uint8_t fields1;
+
+	/* Command code (EC_CMD_*) */
+	uint16_t command;
+
+	/* Length of data which follows this header (not including data CRC) */
+	uint16_t data_len;
+
+	/* Reserved (set 0, ignore on read) */
+	uint8_t reserved;
+
+	/* CRC-8 of above fields, using x^8 + x^2 + x + 1 polynomial */
+	uint8_t header_crc;
+} __ec_align4;
+
+/* Version 4 response from EC */
+struct ec_host_response4 {
+	/*
+	 * bits 0-3: struct_version: Structure version (=4)
+	 * bit    4: is_response: Is response (=1)
+	 * bits 5-6: seq_num: Sequence number
+	 * bit    7: seq_dup: Sequence duplicate flag
+	 */
+	uint8_t fields0;
+
+	/*
+	 * bits 0-6: Reserved (set 0, ignore on read)
+	 * bit    7: data_crc_present: Is data CRC present after data
+	 */
+	uint8_t fields1;
+
+	/* Result code (EC_RES_*) */
+	uint16_t result;
+
+	/* Length of data which follows this header (not including data CRC) */
+	uint16_t data_len;
+
+	/* Reserved (set 0, ignore on read) */
+	uint8_t reserved;
+
+	/* CRC-8 of above fields, using x^8 + x^2 + x + 1 polynomial */
+	uint8_t header_crc;
+} __ec_align4;
+
+/* Fields in fields0 byte */
+#define EC_PACKET4_0_STRUCT_VERSION_MASK	0x0f
+#define EC_PACKET4_0_IS_RESPONSE_MASK		0x10
+#define EC_PACKET4_0_SEQ_NUM_SHIFT		5
+#define EC_PACKET4_0_SEQ_NUM_MASK		0x60
+#define EC_PACKET4_0_SEQ_DUP_MASK		0x80
+
+/* Fields in fields1 byte */
+#define EC_PACKET4_1_COMMAND_VERSION_MASK	0x1f  /* (request only) */
+#define EC_PACKET4_1_DATA_CRC_PRESENT_MASK	0x80
+
 /*****************************************************************************/
 /*
  * Notes on commands:
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 15/30] mfd: cros_ec: Complete MEMS sensor API
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (13 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 14/30] mfd: cros_ec: Add EC transport protocol v4 Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 16/30] mfd: cros_ec: Fix event processing API Gwendal Grignou
                   ` (15 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Add new command for batched mode, add support for more sensors.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 464 +++++++++++++++++++++++----
 1 file changed, 406 insertions(+), 58 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 48e753df7e2d..594db631452f 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -2161,7 +2161,13 @@ enum motionsense_command {
 
 	/*
 	 * EC Rate command is a setter/getter command for the EC sampling rate
-	 * of all motion sensors in milliseconds.
+	 * in milliseconds.
+	 * It is per sensor, the EC run sample task  at the minimum of all
+	 * sensors EC_RATE.
+	 * For sensors without hardware FIFO, EC_RATE should be equals to 1/ODR
+	 * to collect all the sensor samples.
+	 * For sensor with hardware FIFO, EC_RATE is used as the maximal delay
+	 * to process of all motion sensors in milliseconds.
 	 */
 	MOTIONSENSE_CMD_EC_RATE = 2,
 
@@ -2192,32 +2198,76 @@ enum motionsense_command {
 	MOTIONSENSE_CMD_DATA = 6,
 
 	/*
-	 * Perform low level calibration.. On sensors that support it, ask to
-	 * do offset calibration.
+	 * Return sensor fifo info.
+	 */
+	MOTIONSENSE_CMD_FIFO_INFO = 7,
+
+	/*
+	 * Insert a flush element in the fifo and return sensor fifo info.
+	 * The host can use that element to synchronize its operation.
+	 */
+	MOTIONSENSE_CMD_FIFO_FLUSH = 8,
+
+	/*
+	 * Return a portion of the fifo.
+	 */
+	MOTIONSENSE_CMD_FIFO_READ = 9,
+
+	/*
+	 * Perform low level calibration.
+	 * On sensors that support it, ask to do offset calibration.
 	 */
 	MOTIONSENSE_CMD_PERFORM_CALIB = 10,
 
 	/*
-	 * Sensor Offset command is a setter/getter command for the offset used
-	 * for calibration. The offsets can be calculated by the host, or via
+	 * Sensor Offset command is a setter/getter command for the offset
+	 * used for calibration.
+	 * The offsets can be calculated by the host, or via
 	 * PERFORM_CALIB command.
 	 */
 	MOTIONSENSE_CMD_SENSOR_OFFSET = 11,
 
-	/* Number of motionsense sub-commands. */
-	MOTIONSENSE_NUM_CMDS
-};
+	/*
+	 * List available activities for a MOTION sensor.
+	 * Indicates if they are enabled or disabled.
+	 */
+	MOTIONSENSE_CMD_LIST_ACTIVITIES = 12,
+
+	/*
+	 * Activity management
+	 * Enable/Disable activity recognition.
+	 */
+	MOTIONSENSE_CMD_SET_ACTIVITY = 13,
+
+	/*
+	 * Lid Angle
+	 */
+	MOTIONSENSE_CMD_LID_ANGLE = 14,
+
+	/*
+	 * Allow the FIFO to trigger interrupt via MKBP events.
+	 * By default the FIFO does not send interrupt to process the FIFO
+	 * until the AP is ready or it is coming from a wakeup sensor.
+	 */
+	MOTIONSENSE_CMD_FIFO_INT_ENABLE = 15,
+
+	/*
+	 * Spoof the readings of the sensors.  The spoofed readings can be set
+	 * to arbitrary values, or will lock to the last read actual values.
+	 */
+	MOTIONSENSE_CMD_SPOOF = 16,
 
-enum motionsensor_id {
-	EC_MOTION_SENSOR_ACCEL_BASE = 0,
-	EC_MOTION_SENSOR_ACCEL_LID = 1,
-	EC_MOTION_SENSOR_GYRO = 2,
+	/* Set lid angle for tablet mode detection. */
+	MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE = 17,
 
 	/*
-	 * Note, if more sensors are added and this count changes, the padding
-	 * in ec_response_motion_sense dump command must be modified.
+	 * Sensor Scale command is a setter/getter command for the calibration
+	 * scale.
 	 */
-	EC_MOTION_SENSOR_COUNT = 3
+	MOTIONSENSE_CMD_SENSOR_SCALE = 18,
+
+	/* Number of motionsense sub-commands. */
+	MOTIONSENSE_NUM_CMDS
 };
 
 /* List of motion sensor types. */
@@ -2229,6 +2279,7 @@ enum motionsensor_type {
 	MOTIONSENSE_TYPE_LIGHT = 4,
 	MOTIONSENSE_TYPE_ACTIVITY = 5,
 	MOTIONSENSE_TYPE_BARO = 6,
+	MOTIONSENSE_TYPE_SYNC = 7,
 	MOTIONSENSE_TYPE_MAX,
 };
 
@@ -2236,36 +2287,48 @@ enum motionsensor_type {
 enum motionsensor_location {
 	MOTIONSENSE_LOC_BASE = 0,
 	MOTIONSENSE_LOC_LID = 1,
+	MOTIONSENSE_LOC_CAMERA = 2,
 	MOTIONSENSE_LOC_MAX,
 };
 
 /* List of motion sensor chips. */
 enum motionsensor_chip {
 	MOTIONSENSE_CHIP_KXCJ9 = 0,
+	MOTIONSENSE_CHIP_LSM6DS0 = 1,
+	MOTIONSENSE_CHIP_BMI160 = 2,
+	MOTIONSENSE_CHIP_SI1141 = 3,
+	MOTIONSENSE_CHIP_SI1142 = 4,
+	MOTIONSENSE_CHIP_SI1143 = 5,
+	MOTIONSENSE_CHIP_KX022 = 6,
+	MOTIONSENSE_CHIP_L3GD20H = 7,
+	MOTIONSENSE_CHIP_BMA255 = 8,
+	MOTIONSENSE_CHIP_BMP280 = 9,
+	MOTIONSENSE_CHIP_OPT3001 = 10,
+	MOTIONSENSE_CHIP_BH1730 = 11,
+	MOTIONSENSE_CHIP_GPIO = 12,
+	MOTIONSENSE_CHIP_LIS2DH = 13,
+	MOTIONSENSE_CHIP_LSM6DSM = 14,
+	MOTIONSENSE_CHIP_LIS2DE = 15,
+	MOTIONSENSE_CHIP_LIS2MDL = 16,
+	MOTIONSENSE_CHIP_LSM6DS3 = 17,
+	MOTIONSENSE_CHIP_LSM6DSO = 18,
+	MOTIONSENSE_CHIP_LNG2DM = 19,
+	MOTIONSENSE_CHIP_MAX,
 };
 
-/* Module flag masks used for the dump sub-command. */
-#define MOTIONSENSE_MODULE_FLAG_ACTIVE (1<<0)
-
-/* Sensor flag masks used for the dump sub-command. */
-#define MOTIONSENSE_SENSOR_FLAG_PRESENT (1<<0)
-
-/*
- * Send this value for the data element to only perform a read. If you
- * send any other value, the EC will interpret it as data to set and will
- * return the actual value set.
- */
-#define EC_MOTION_SENSE_NO_VALUE -1
-
-#define EC_MOTION_SENSE_INVALID_CALIB_TEMP 0x8000
-
-/* Set Calibration information */
-#define MOTION_SENSE_SET_OFFSET	1
+/* List of orientation positions */
+enum motionsensor_orientation {
+	MOTIONSENSE_ORIENTATION_LANDSCAPE = 0,
+	MOTIONSENSE_ORIENTATION_PORTRAIT = 1,
+	MOTIONSENSE_ORIENTATION_UPSIDE_DOWN_PORTRAIT = 2,
+	MOTIONSENSE_ORIENTATION_UPSIDE_DOWN_LANDSCAPE = 3,
+	MOTIONSENSE_ORIENTATION_UNKNOWN = 4,
+};
 
 struct ec_response_motion_sensor_data {
 	/* Flags for each sensor. */
 	uint8_t flags;
-	/* Sensor number the data comes from */
+	/* Sensor number the data comes from. */
 	uint8_t sensor_num;
 	/* Each sensor is up to 3-axis. */
 	union {
@@ -2282,22 +2345,138 @@ struct ec_response_motion_sensor_data {
 	};
 } __ec_todo_packed;
 
+/* Note: used in ec_response_get_next_data */
+struct ec_response_motion_sense_fifo_info {
+	/* Size of the fifo */
+	uint16_t size;
+	/* Amount of space used in the fifo */
+	uint16_t count;
+	/* Timestamp recorded in us.
+	 * aka accurate timestamp when host event was triggered.
+	 */
+	uint32_t timestamp;
+	/* Total amount of vector lost */
+	uint16_t total_lost;
+	/* Lost events since the last fifo_info, per sensors */
+	uint16_t lost[0];
+} __ec_todo_packed;
+
+struct ec_response_motion_sense_fifo_data {
+	uint32_t number_data;
+	struct ec_response_motion_sensor_data data[0];
+} __ec_todo_packed;
+
+/* List supported activity recognition */
+enum motionsensor_activity {
+	MOTIONSENSE_ACTIVITY_RESERVED = 0,
+	MOTIONSENSE_ACTIVITY_SIG_MOTION = 1,
+	MOTIONSENSE_ACTIVITY_DOUBLE_TAP = 2,
+	MOTIONSENSE_ACTIVITY_ORIENTATION = 3,
+};
+
+struct ec_motion_sense_activity {
+	uint8_t sensor_num;
+	uint8_t activity; /* one of enum motionsensor_activity */
+	uint8_t enable;   /* 1: enable, 0: disable */
+	uint8_t reserved;
+	uint16_t parameters[3]; /* activity dependent parameters */
+} __ec_todo_unpacked;
+
+/* Module flag masks used for the dump sub-command. */
+#define MOTIONSENSE_MODULE_FLAG_ACTIVE BIT(0)
+
+/* Sensor flag masks used for the dump sub-command. */
+#define MOTIONSENSE_SENSOR_FLAG_PRESENT BIT(0)
+
+/*
+ * Flush entry for synchronization.
+ * data contains time stamp
+ */
+#define MOTIONSENSE_SENSOR_FLAG_FLUSH BIT(0)
+#define MOTIONSENSE_SENSOR_FLAG_TIMESTAMP BIT(1)
+#define MOTIONSENSE_SENSOR_FLAG_WAKEUP BIT(2)
+#define MOTIONSENSE_SENSOR_FLAG_TABLET_MODE BIT(3)
+#define MOTIONSENSE_SENSOR_FLAG_ODR BIT(4)
+
+/*
+ * Send this value for the data element to only perform a read. If you
+ * send any other value, the EC will interpret it as data to set and will
+ * return the actual value set.
+ */
+#define EC_MOTION_SENSE_NO_VALUE -1
+
+#define EC_MOTION_SENSE_INVALID_CALIB_TEMP 0x8000
+
+/* MOTIONSENSE_CMD_SENSOR_OFFSET subcommand flag */
+/* Set Calibration information */
+#define MOTION_SENSE_SET_OFFSET BIT(0)
+
+/* Default Scale value, factor 1. */
+#define MOTION_SENSE_DEFAULT_SCALE BIT(15)
+
+#define LID_ANGLE_UNRELIABLE 500
+
+enum motionsense_spoof_mode {
+	/* Disable spoof mode. */
+	MOTIONSENSE_SPOOF_MODE_DISABLE = 0,
+
+	/* Enable spoof mode, but use provided component values. */
+	MOTIONSENSE_SPOOF_MODE_CUSTOM,
+
+	/* Enable spoof mode, but use the current sensor values. */
+	MOTIONSENSE_SPOOF_MODE_LOCK_CURRENT,
+
+	/* Query the current spoof mode status for the sensor. */
+	MOTIONSENSE_SPOOF_MODE_QUERY,
+};
+
 struct ec_params_motion_sense {
 	uint8_t cmd;
 	union {
 		/* Used for MOTIONSENSE_CMD_DUMP. */
 		struct __ec_todo_unpacked {
-			/* no args */
+			/*
+			 * Maximal number of sensor the host is expecting.
+			 * 0 means the host is only interested in the number
+			 * of sensors controlled by the EC.
+			 */
+			uint8_t max_sensor_count;
 		} dump;
 
 		/*
-		 * Used for MOTIONSENSE_CMD_EC_RATE and
-		 * MOTIONSENSE_CMD_KB_WAKE_ANGLE.
+		 * Used for MOTIONSENSE_CMD_KB_WAKE_ANGLE.
 		 */
 		struct __ec_todo_unpacked {
-			/* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */
+			/* Data to set or EC_MOTION_SENSE_NO_VALUE to read.
+			 * kb_wake_angle: angle to wakup AP.
+			 */
 			int16_t data;
-		} ec_rate, kb_wake_angle;
+		} kb_wake_angle;
+
+		/*
+		 * Used for MOTIONSENSE_CMD_INFO, MOTIONSENSE_CMD_DATA
+		 * and MOTIONSENSE_CMD_PERFORM_CALIB.
+		 */
+		struct __ec_todo_unpacked {
+			uint8_t sensor_num;
+		} info, info_3, data, fifo_flush, perform_calib,
+				list_activities;
+
+		/*
+		 * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR
+		 * and MOTIONSENSE_CMD_SENSOR_RANGE.
+		 */
+		struct __ec_todo_unpacked {
+			uint8_t sensor_num;
+
+			/* Rounding flag, true for round-up, false for down. */
+			uint8_t roundup;
+
+			uint16_t reserved;
+
+			/* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */
+			int32_t data;
+		} ec_rate, sensor_odr, sensor_range;
 
 		/* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */
 		struct __ec_todo_packed {
@@ -2328,33 +2507,99 @@ struct ec_params_motion_sense {
 			int16_t offset[3];
 		} sensor_offset;
 
-		/* Used for MOTIONSENSE_CMD_INFO. */
+		/* Used for MOTIONSENSE_CMD_SENSOR_SCALE */
 		struct __ec_todo_packed {
 			uint8_t sensor_num;
-		} info;
 
-		/*
-		 * Used for MOTIONSENSE_CMD_SENSOR_ODR and
-		 * MOTIONSENSE_CMD_SENSOR_RANGE.
-		 */
-		struct {
-			/* Should be element of enum motionsensor_id. */
-			uint8_t sensor_num;
+			/*
+			 * bit 0: If set (MOTION_SENSE_SET_OFFSET), set
+			 * the calibration information in the EC.
+			 * If unset, just retrieve calibration information.
+			 */
+			uint16_t flags;
 
-			/* Rounding flag, true for round-up, false for down. */
-			uint8_t roundup;
+			/*
+			 * Temperature at calibration, in units of 0.01 C
+			 * 0x8000: invalid / unknown.
+			 * 0x0: 0C
+			 * 0x7fff: +327.67C
+			 */
+			int16_t temp;
 
-			uint16_t reserved;
+			/*
+			 * Scale for calibration:
+			 * By default scale is 1, it is encoded on 16bits:
+			 * 1 = BIT(15)
+			 * ~2 = 0xFFFF
+			 * ~0 = 0.
+			 */
+			uint16_t scale[3];
+		} sensor_scale;
 
-			/* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */
-			int32_t data;
-		} sensor_odr, sensor_range;
+
+		/* Used for MOTIONSENSE_CMD_FIFO_INFO */
+		/* (no params) */
+
+		/* Used for MOTIONSENSE_CMD_FIFO_READ */
+		struct __ec_todo_unpacked {
+			/*
+			 * Number of expected vector to return.
+			 * EC may return less or 0 if none available.
+			 */
+			uint32_t max_data_vector;
+		} fifo_read;
+
+		struct ec_motion_sense_activity set_activity;
+
+		/* Used for MOTIONSENSE_CMD_LID_ANGLE */
+		/* (no params) */
+
+		/* Used for MOTIONSENSE_CMD_FIFO_INT_ENABLE */
+		struct __ec_todo_unpacked {
+			/*
+			 * 1: enable, 0 disable fifo,
+			 * EC_MOTION_SENSE_NO_VALUE return value.
+			 */
+			int8_t enable;
+		} fifo_int_enable;
+
+		/* Used for MOTIONSENSE_CMD_SPOOF */
+		struct __ec_todo_packed {
+			uint8_t sensor_id;
+
+			/* See enum motionsense_spoof_mode. */
+			uint8_t spoof_enable;
+
+			/* Ignored, used for alignment. */
+			uint8_t reserved;
+
+			/* Individual component values to spoof. */
+			int16_t components[3];
+		} spoof;
+
+		/* Used for MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE. */
+		struct __ec_todo_unpacked {
+			/*
+			 * Lid angle threshold for switching between tablet and
+			 * clamshell mode.
+			 */
+			int16_t lid_angle;
+
+			/*
+			 * Hysteresis degree to prevent fluctuations between
+			 * clamshell and tablet mode if lid angle keeps
+			 * changing around the threshold. Lid motion driver will
+			 * use lid_angle + hys_degree to trigger tablet mode and
+			 * lid_angle - hys_degree to trigger clamshell mode.
+			 */
+			int16_t hys_degree;
+		} tablet_mode_threshold;
 	};
 } __ec_todo_packed;
 
 struct ec_response_motion_sense {
 	union {
-		/* Used for MOTIONSENSE_CMD_DUMP. */
+		/* Used for MOTIONSENSE_CMD_DUMP */
 		struct __ec_todo_unpacked {
 			/* Flags representing the motion sensor module. */
 			uint8_t module_flags;
@@ -2381,27 +2626,118 @@ struct ec_response_motion_sense {
 			uint8_t chip;
 		} info;
 
+		/* Used for MOTIONSENSE_CMD_INFO version 3 */
+		struct __ec_todo_unpacked {
+			/* Should be element of enum motionsensor_type. */
+			uint8_t type;
+
+			/* Should be element of enum motionsensor_location. */
+			uint8_t location;
+
+			/* Should be element of enum motionsensor_chip. */
+			uint8_t chip;
+
+			/* Minimum sensor sampling frequency */
+			uint32_t min_frequency;
+
+			/* Maximum sensor sampling frequency */
+			uint32_t max_frequency;
+
+			/* Max number of sensor events that could be in fifo */
+			uint32_t fifo_max_event_count;
+		} info_3;
+
 		/* Used for MOTIONSENSE_CMD_DATA */
 		struct ec_response_motion_sensor_data data;
 
 		/*
 		 * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR,
-		 * MOTIONSENSE_CMD_SENSOR_RANGE, and
-		 * MOTIONSENSE_CMD_KB_WAKE_ANGLE.
+		 * MOTIONSENSE_CMD_SENSOR_RANGE,
+		 * MOTIONSENSE_CMD_KB_WAKE_ANGLE,
+		 * MOTIONSENSE_CMD_FIFO_INT_ENABLE and
+		 * MOTIONSENSE_CMD_SPOOF.
 		 */
 		struct __ec_todo_unpacked {
 			/* Current value of the parameter queried. */
 			int32_t ret;
-		} ec_rate, sensor_odr, sensor_range, kb_wake_angle;
+		} ec_rate, sensor_odr, sensor_range, kb_wake_angle,
+		  fifo_int_enable, spoof;
 
-		/* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */
+		/*
+		 * Used for MOTIONSENSE_CMD_SENSOR_OFFSET,
+		 * PERFORM_CALIB.
+		 */
 		struct __ec_todo_unpacked  {
 			int16_t temp;
 			int16_t offset[3];
 		} sensor_offset, perform_calib;
+
+		/* Used for MOTIONSENSE_CMD_SENSOR_SCALE */
+		struct __ec_todo_unpacked  {
+			int16_t temp;
+			uint16_t scale[3];
+		} sensor_scale;
+
+		struct ec_response_motion_sense_fifo_info fifo_info, fifo_flush;
+
+		struct ec_response_motion_sense_fifo_data fifo_read;
+
+		struct __ec_todo_packed {
+			uint16_t reserved;
+			uint32_t enabled;
+			uint32_t disabled;
+		} list_activities;
+
+		/* No params for set activity */
+
+		/* Used for MOTIONSENSE_CMD_LID_ANGLE */
+		struct __ec_todo_unpacked {
+			/*
+			 * Angle between 0 and 360 degree if available,
+			 * LID_ANGLE_UNRELIABLE otherwise.
+			 */
+			uint16_t value;
+		} lid_angle;
+
+		/* Used for MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE. */
+		struct __ec_todo_unpacked {
+			/*
+			 * Lid angle threshold for switching between tablet and
+			 * clamshell mode.
+			 */
+			uint16_t lid_angle;
+
+			/* Hysteresis degree. */
+			uint16_t hys_degree;
+		} tablet_mode_threshold;
+
 	};
 } __ec_todo_packed;
 
+/*****************************************************************************/
+/* Force lid open command */
+
+/* Make lid event always open */
+#define EC_CMD_FORCE_LID_OPEN 0x002C
+
+struct ec_params_force_lid_open {
+	uint8_t enabled;
+} __ec_align1;
+
+/*****************************************************************************/
+/* Configure the behavior of the power button */
+#define EC_CMD_CONFIG_POWER_BUTTON 0x002D
+
+enum ec_config_power_button_flags {
+	/* Enable/Disable power button pulses for x86 devices */
+	EC_POWER_BUTTON_ENABLE_PULSE = BIT(0),
+};
+
+struct ec_params_config_power_button {
+	/* See enum ec_config_power_button_flags */
+	uint8_t flags;
+} __ec_align1;
+
 /*****************************************************************************/
 /* USB charging control commands */
 
@@ -2858,6 +3194,12 @@ union __ec_align_offset1 ec_response_get_next_data {
 	/* Unaligned */
 	uint32_t  host_event;
 
+	struct __ec_todo_unpacked {
+		/* For aligning the fifo_info */
+		uint8_t reserved[3];
+		struct ec_response_motion_sense_fifo_info info;
+	} sensor_fifo;
+
 	uint32_t   buttons;
 	uint32_t   switches;
 	uint32_t   sysrq;
@@ -2866,6 +3208,12 @@ union __ec_align_offset1 ec_response_get_next_data {
 union __ec_align_offset1 ec_response_get_next_data_v1 {
 	uint8_t key_matrix[16];
 	uint32_t host_event;
+	struct __ec_todo_unpacked {
+		/* For aligning the fifo_info */
+		uint8_t reserved[3];
+		struct ec_response_motion_sense_fifo_info info;
+	} sensor_fifo;
+
 	uint32_t buttons;
 	uint32_t switches;
 	uint32_t sysrq;
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 16/30] mfd: cros_ec: Fix event processing API
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (14 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 15/30] mfd: cros_ec: Complete MEMS sensor API Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 17/30] mfd: cros_ec: Add fingerprint API Gwendal Grignou
                   ` (14 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Improve API between EC and Host to report events.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 115 ++++++++++++++++++++++++---
 1 file changed, 105 insertions(+), 10 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 594db631452f..2d59b4480876 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -500,7 +500,8 @@ enum host_event_code {
 	EC_HOST_EVENT_BATTERY_CRITICAL = 7,
 	EC_HOST_EVENT_BATTERY = 8,
 	EC_HOST_EVENT_THERMAL_THRESHOLD = 9,
-	EC_HOST_EVENT_THERMAL_OVERLOAD = 10,
+	/* Event generated by a device attached to the EC */
+	EC_HOST_EVENT_DEVICE = 10,
 	EC_HOST_EVENT_THERMAL = 11,
 	EC_HOST_EVENT_USB_CHARGER = 12,
 	EC_HOST_EVENT_KEY_PRESSED = 13,
@@ -527,15 +528,34 @@ enum host_event_code {
 	EC_HOST_EVENT_HANG_DETECT = 20,
 	/* Hang detect logic detected a hang and warm rebooted the AP */
 	EC_HOST_EVENT_HANG_REBOOT = 21,
+
 	/* PD MCU triggering host event */
 	EC_HOST_EVENT_PD_MCU = 22,
 
-	/* EC desires to change state of host-controlled USB mux */
-	EC_HOST_EVENT_USB_MUX = 28,
+	/* Battery Status flags have changed */
+	EC_HOST_EVENT_BATTERY_STATUS = 23,
+
+	/* EC encountered a panic, triggering a reset */
+	EC_HOST_EVENT_PANIC = 24,
+
+	/* Keyboard fastboot combo has been pressed */
+	EC_HOST_EVENT_KEYBOARD_FASTBOOT = 25,
 
 	/* EC RTC event occurred */
 	EC_HOST_EVENT_RTC = 26,
 
+	/* Emulate MKBP event */
+	EC_HOST_EVENT_MKBP = 27,
+
+	/* EC desires to change state of host-controlled USB mux */
+	EC_HOST_EVENT_USB_MUX = 28,
+
+	/* TABLET/LAPTOP mode or detachable base attach/detach event */
+	EC_HOST_EVENT_MODE_CHANGE = 29,
+
+	/* Keyboard recovery combo with hardware reinitialization */
+	EC_HOST_EVENT_KEYBOARD_RECOVERY_HW_REINIT = 30,
+
 	/*
 	 * The high bit of the event mask is not used as a host event code.  If
 	 * it reads back as set, then the entire event mask should be
@@ -1227,10 +1247,40 @@ enum ec_feature_code {
 	EC_FEATURE_USB_MUX = 23,
 	/* Motion Sensor code has an internal software FIFO */
 	EC_FEATURE_MOTION_SENSE_FIFO = 24,
+	/* Support temporary secure vstore */
+	EC_FEATURE_VSTORE = 25,
+	/* EC decides on USB-C SS mux state, muxes configured by host */
+	EC_FEATURE_USBC_SS_MUX_VIRTUAL = 26,
 	/* EC has RTC feature that can be controlled by host commands */
 	EC_FEATURE_RTC = 27,
+	/* The MCU exposes a Fingerprint sensor */
+	EC_FEATURE_FINGERPRINT = 28,
+	/* The MCU exposes a Touchpad */
+	EC_FEATURE_TOUCHPAD = 29,
+	/* The MCU has RWSIG task enabled */
+	EC_FEATURE_RWSIG = 30,
+	/* EC has device events support */
+	EC_FEATURE_DEVICE_EVENT = 31,
+	/* EC supports the unified wake masks for LPC/eSPI systems */
+	EC_FEATURE_UNIFIED_WAKE_MASKS = 32,
+	/* EC supports 64-bit host events */
+	EC_FEATURE_HOST_EVENT64 = 33,
+	/* EC runs code in RAM (not in place, a.k.a. XIP) */
+	EC_FEATURE_EXEC_IN_RAM = 34,
 	/* EC supports CEC commands */
 	EC_FEATURE_CEC = 35,
+	/* EC supports tight sensor timestamping. */
+	EC_FEATURE_MOTION_SENSE_TIGHT_TIMESTAMPS = 36,
+	/*
+	 * EC supports tablet mode detection aligned to Chrome and allows
+	 * setting of threshold by host command using
+	 * MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE.
+	 */
+	EC_FEATURE_REFINED_TABLET_MODE_HYSTERESIS = 37,
+	/* EC supports audio codec. */
+	EC_FEATURE_AUDIO_CODEC = 38,
+	/* The MCU is a System Companion Processor (SCP). */
+	EC_FEATURE_SCP = 39,
 	/* The MCU is an Integrated Sensor Hub */
 	EC_FEATURE_ISH = 40,
 };
@@ -3153,12 +3203,23 @@ struct ec_result_keyscan_seq_ctrl {
 } __ec_todo_packed;
 
 /*
- * Command for retrieving the next pending MKBP event from the EC device
+ * Get the next pending MKBP event.
  *
- * The device replies with UNAVAILABLE if there aren't any pending events.
+ * Returns EC_RES_UNAVAILABLE if there is no event pending.
  */
 #define EC_CMD_GET_NEXT_EVENT 0x0067
 
+#define EC_MKBP_HAS_MORE_EVENTS_SHIFT 7
+
+/*
+ * We use the most significant bit of the event type to indicate to the host
+ * that the EC has more MKBP events available to provide.
+ */
+#define EC_MKBP_HAS_MORE_EVENTS BIT(EC_MKBP_HAS_MORE_EVENTS_SHIFT)
+
+/* The mask to apply to get the raw event type */
+#define EC_MKBP_EVENT_TYPE_MASK (BIT(EC_MKBP_HAS_MORE_EVENTS_SHIFT) - 1)
+
 enum ec_mkbp_event {
 	/* Keyboard matrix changed. The event data is the new matrix state. */
 	EC_MKBP_EVENT_KEY_MATRIX = 0,
@@ -3175,9 +3236,21 @@ enum ec_mkbp_event {
 	/* The state of the switches have changed. */
 	EC_MKBP_EVENT_SWITCH = 4,
 
-	/* EC sent a sysrq command */
+	/* New Fingerprint sensor event, the event data is fp_events bitmap. */
+	EC_MKBP_EVENT_FINGERPRINT = 5,
+
+	/*
+	 * Sysrq event: send emulated sysrq. The event data is sysrq,
+	 * corresponding to the key to be pressed.
+	 */
 	EC_MKBP_EVENT_SYSRQ = 6,
 
+	/*
+	 * New 64-bit host event.
+	 * The event data is 8 bytes of host event flags.
+	 */
+	EC_MKBP_EVENT_HOST_EVENT64 = 7,
+
 	/* Notify the AP that something happened on CEC */
 	EC_MKBP_EVENT_CEC_EVENT = 8,
 
@@ -3187,12 +3260,14 @@ enum ec_mkbp_event {
 	/* Number of MKBP events */
 	EC_MKBP_EVENT_COUNT,
 };
+BUILD_ASSERT(EC_MKBP_EVENT_COUNT <= EC_MKBP_EVENT_TYPE_MASK);
 
 union __ec_align_offset1 ec_response_get_next_data {
 	uint8_t key_matrix[13];
 
 	/* Unaligned */
-	uint32_t  host_event;
+	uint32_t host_event;
+	uint64_t host_event64;
 
 	struct __ec_todo_unpacked {
 		/* For aligning the fifo_info */
@@ -3200,14 +3275,25 @@ union __ec_align_offset1 ec_response_get_next_data {
 		struct ec_response_motion_sense_fifo_info info;
 	} sensor_fifo;
 
-	uint32_t   buttons;
-	uint32_t   switches;
-	uint32_t   sysrq;
+	uint32_t buttons;
+
+	uint32_t switches;
+
+	uint32_t fp_events;
+
+	uint32_t sysrq;
+
+	/* CEC events from enum mkbp_cec_event */
+	uint32_t cec_events;
 };
 
 union __ec_align_offset1 ec_response_get_next_data_v1 {
 	uint8_t key_matrix[16];
+
+	/* Unaligned */
 	uint32_t host_event;
+	uint64_t host_event64;
+
 	struct __ec_todo_unpacked {
 		/* For aligning the fifo_info */
 		uint8_t reserved[3];
@@ -3215,11 +3301,19 @@ union __ec_align_offset1 ec_response_get_next_data_v1 {
 	} sensor_fifo;
 
 	uint32_t buttons;
+
 	uint32_t switches;
+
+	uint32_t fp_events;
+
 	uint32_t sysrq;
+
+	/* CEC events from enum mkbp_cec_event */
 	uint32_t cec_events;
+
 	uint8_t cec_message[16];
 };
+BUILD_ASSERT(sizeof(union ec_response_get_next_data_v1) == 16);
 
 struct ec_response_get_next_event {
 	uint8_t event_type;
@@ -3238,6 +3332,7 @@ struct ec_response_get_next_event_v1 {
 #define EC_MKBP_POWER_BUTTON	0
 #define EC_MKBP_VOL_UP		1
 #define EC_MKBP_VOL_DOWN	2
+#define EC_MKBP_RECOVERY	3
 
 /* Switches */
 #define EC_MKBP_LID_OPEN	0
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 17/30] mfd: cros_ec: Add fingerprint API
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (15 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 16/30] mfd: cros_ec: Fix event processing API Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 18/30] mfd: cros_ec: Fix temperature API Gwendal Grignou
                   ` (13 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Add support for fingerprint sensors managed by embedded controller.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 34 ++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 2d59b4480876..399fedebc388 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -3339,6 +3339,40 @@ struct ec_response_get_next_event_v1 {
 #define EC_MKBP_TABLET_MODE	1
 #define EC_MKBP_BASE_ATTACHED	2
 
+/* Fingerprint events in 'fp_events' for EC_MKBP_EVENT_FINGERPRINT */
+#define EC_MKBP_FP_RAW_EVENT(fp_events) ((fp_events) & 0x00FFFFFF)
+#define EC_MKBP_FP_ERRCODE(fp_events)   ((fp_events) & 0x0000000F)
+#define EC_MKBP_FP_ENROLL_PROGRESS_OFFSET 4
+#define EC_MKBP_FP_ENROLL_PROGRESS(fpe) (((fpe) & 0x00000FF0) \
+					 >> EC_MKBP_FP_ENROLL_PROGRESS_OFFSET)
+#define EC_MKBP_FP_MATCH_IDX_OFFSET 12
+#define EC_MKBP_FP_MATCH_IDX_MASK 0x0000F000
+#define EC_MKBP_FP_MATCH_IDX(fpe) (((fpe) & EC_MKBP_FP_MATCH_IDX_MASK) \
+					 >> EC_MKBP_FP_MATCH_IDX_OFFSET)
+#define EC_MKBP_FP_ENROLL               BIT(27)
+#define EC_MKBP_FP_MATCH                BIT(28)
+#define EC_MKBP_FP_FINGER_DOWN          BIT(29)
+#define EC_MKBP_FP_FINGER_UP            BIT(30)
+#define EC_MKBP_FP_IMAGE_READY          BIT(31)
+/* code given by EC_MKBP_FP_ERRCODE() when EC_MKBP_FP_ENROLL is set */
+#define EC_MKBP_FP_ERR_ENROLL_OK               0
+#define EC_MKBP_FP_ERR_ENROLL_LOW_QUALITY      1
+#define EC_MKBP_FP_ERR_ENROLL_IMMOBILE         2
+#define EC_MKBP_FP_ERR_ENROLL_LOW_COVERAGE     3
+#define EC_MKBP_FP_ERR_ENROLL_INTERNAL         5
+/* Can be used to detect if image was usable for enrollment or not. */
+#define EC_MKBP_FP_ERR_ENROLL_PROBLEM_MASK     1
+/* code given by EC_MKBP_FP_ERRCODE() when EC_MKBP_FP_MATCH is set */
+#define EC_MKBP_FP_ERR_MATCH_NO                0
+#define EC_MKBP_FP_ERR_MATCH_NO_INTERNAL       6
+#define EC_MKBP_FP_ERR_MATCH_NO_TEMPLATES      7
+#define EC_MKBP_FP_ERR_MATCH_NO_LOW_QUALITY    2
+#define EC_MKBP_FP_ERR_MATCH_NO_LOW_COVERAGE   4
+#define EC_MKBP_FP_ERR_MATCH_YES               1
+#define EC_MKBP_FP_ERR_MATCH_YES_UPDATED       3
+#define EC_MKBP_FP_ERR_MATCH_YES_UPDATE_FAILED 5
+
+
 /*****************************************************************************/
 /* Temperature sensor commands */
 
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 18/30] mfd: cros_ec: Fix temperature API
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (16 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 17/30] mfd: cros_ec: Add fingerprint API Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 19/30] mfd: cros_ec: Complete Power and USB PD API Gwendal Grignou
                   ` (12 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Improve API to retrieve temperature information.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 64 +++++++++++++++++++++++++---
 1 file changed, 57 insertions(+), 7 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 399fedebc388..94689698330f 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -2945,9 +2945,28 @@ enum ec_temp_thresholds {
 /*
  * Thermal configuration for one temperature sensor. Temps are in degrees K.
  * Zero values will be silently ignored by the thermal task.
+ *
+ * Set 'temp_host' value allows thermal task to trigger some event with 1 degree
+ * hysteresis.
+ * For example,
+ *	temp_host[EC_TEMP_THRESH_HIGH] = 300 K
+ *	temp_host_release[EC_TEMP_THRESH_HIGH] = 0 K
+ * EC will throttle ap when temperature >= 301 K, and release throttling when
+ * temperature <= 299 K.
+ *
+ * Set 'temp_host_release' value allows thermal task has a custom hysteresis.
+ * For example,
+ *	temp_host[EC_TEMP_THRESH_HIGH] = 300 K
+ *	temp_host_release[EC_TEMP_THRESH_HIGH] = 295 K
+ * EC will throttle ap when temperature >= 301 K, and release throttling when
+ * temperature <= 294 K.
+ *
+ * Note that this structure is a sub-structure of
+ * ec_params_thermal_set_threshold_v1, but maintains its alignment there.
  */
 struct ec_thermal_config {
 	uint32_t temp_host[EC_TEMP_THRESH_COUNT]; /* levels of hotness */
+	uint32_t temp_host_release[EC_TEMP_THRESH_COUNT]; /* release levels */
 	uint32_t temp_fan_off;		/* no active cooling needed */
 	uint32_t temp_fan_max;		/* max active cooling needed */
 } __ec_align4;
@@ -2973,32 +2992,63 @@ struct ec_params_thermal_set_threshold_v1 {
 /* Toggle automatic fan control */
 #define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x0052
 
-/* Get TMP006 calibration data */
+/* Version 1 of input params */
+struct ec_params_auto_fan_ctrl_v1 {
+	uint8_t fan_idx;
+} __ec_align1;
+
+/* Get/Set TMP006 calibration data */
 #define EC_CMD_TMP006_GET_CALIBRATION 0x0053
+#define EC_CMD_TMP006_SET_CALIBRATION 0x0054
+
+/*
+ * The original TMP006 calibration only needed four params, but now we need
+ * more. Since the algorithm is nothing but magic numbers anyway, we'll leave
+ * the params opaque. The v1 "get" response will include the algorithm number
+ * and how many params it requires. That way we can change the EC code without
+ * needing to update this file. We can also use a different algorithm on each
+ * sensor.
+ */
 
+/* This is the same struct for both v0 and v1. */
 struct ec_params_tmp006_get_calibration {
 	uint8_t index;
 } __ec_align1;
 
-struct ec_response_tmp006_get_calibration {
+/* Version 0 */
+struct ec_response_tmp006_get_calibration_v0 {
 	float s0;
 	float b0;
 	float b1;
 	float b2;
 } __ec_align4;
 
-/* Set TMP006 calibration data */
-#define EC_CMD_TMP006_SET_CALIBRATION 0x0054
-
-struct ec_params_tmp006_set_calibration {
+struct ec_params_tmp006_set_calibration_v0 {
 	uint8_t index;
-	uint8_t reserved[3];  /* Reserved; set 0 */
+	uint8_t reserved[3];
 	float s0;
 	float b0;
 	float b1;
 	float b2;
 } __ec_align4;
 
+/* Version 1 */
+struct ec_response_tmp006_get_calibration_v1 {
+	uint8_t algorithm;
+	uint8_t num_params;
+	uint8_t reserved[2];
+	float val[0];
+} __ec_align4;
+
+struct ec_params_tmp006_set_calibration_v1 {
+	uint8_t index;
+	uint8_t algorithm;
+	uint8_t num_params;
+	uint8_t reserved;
+	float val[0];
+} __ec_align4;
+
+
 /* Read raw TMP006 data */
 #define EC_CMD_TMP006_GET_RAW 0x0055
 
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 19/30] mfd: cros_ec: Complete Power and USB PD API
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (17 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 18/30] mfd: cros_ec: Fix temperature API Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 20/30] mfd: cros_ec: Add API for keyboard testing Gwendal Grignou
                   ` (11 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Improve API for USB Powe delivery and power management.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 236 ++++++++++++++++++++++++++-
 1 file changed, 228 insertions(+), 8 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 94689698330f..4784f3634793 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -2796,7 +2796,8 @@ struct ec_params_config_power_button {
 
 struct ec_params_usb_charge_set_mode {
 	uint8_t usb_port_id;
-	uint8_t mode;
+	uint8_t mode:7;
+	uint8_t inhibit_charge:1;
 } __ec_align1;
 
 /*****************************************************************************/
@@ -3933,6 +3934,11 @@ enum charge_state_params {
 	CS_PARAM_CHG_INPUT_CURRENT,   /* charger input current limit */
 	CS_PARAM_CHG_STATUS,	      /* charger-specific status */
 	CS_PARAM_CHG_OPTION,	      /* charger-specific options */
+	CS_PARAM_LIMIT_POWER,	      /*
+				       * Check if power is limited due to
+				       * low battery and / or a weak external
+				       * charger. READ ONLY.
+				       */
 	/* How many so far? */
 	CS_NUM_BASE_PARAMS,
 
@@ -3940,6 +3946,17 @@ enum charge_state_params {
 	CS_PARAM_CUSTOM_PROFILE_MIN = 0x10000,
 	CS_PARAM_CUSTOM_PROFILE_MAX = 0x1ffff,
 
+	/* Range for CONFIG_CHARGE_STATE_DEBUG params */
+	CS_PARAM_DEBUG_MIN = 0x20000,
+	CS_PARAM_DEBUG_CTL_MODE = 0x20000,
+	CS_PARAM_DEBUG_MANUAL_MODE,
+	CS_PARAM_DEBUG_SEEMS_DEAD,
+	CS_PARAM_DEBUG_SEEMS_DISCONNECTED,
+	CS_PARAM_DEBUG_BATT_REMOVED,
+	CS_PARAM_DEBUG_MANUAL_CURRENT,
+	CS_PARAM_DEBUG_MANUAL_VOLTAGE,
+	CS_PARAM_DEBUG_MAX = 0x2ffff,
+
 	/* Other custom param ranges go here... */
 };
 
@@ -4000,6 +4017,16 @@ struct ec_params_external_power_limit_v1 {
 
 #define EC_POWER_LIMIT_NONE 0xffff
 
+/*
+ * Set maximum voltage & current of a dedicated charge port
+ */
+#define EC_CMD_OVERRIDE_DEDICATED_CHARGER_LIMIT 0x00A3
+
+struct ec_params_dedicated_charger_limit {
+	uint16_t current_lim; /* in mA */
+	uint16_t voltage_lim; /* in mV */
+} __ec_align2;
+
 /* Inform the EC when entering a sleep state */
 #define EC_CMD_HOST_SLEEP_EVENT 0x00A9
 
@@ -4328,18 +4355,53 @@ struct ec_params_reboot_ec {
 
 /* EC to PD MCU exchange status command */
 #define EC_CMD_PD_EXCHANGE_STATUS 0x0100
+#define EC_VER_PD_EXCHANGE_STATUS 2
+
+enum pd_charge_state {
+	PD_CHARGE_NO_CHANGE = 0, /* Don't change charge state */
+	PD_CHARGE_NONE,          /* No charging allowed */
+	PD_CHARGE_5V,            /* 5V charging only */
+	PD_CHARGE_MAX            /* Charge at max voltage */
+};
 
 /* Status of EC being sent to PD */
+#define EC_STATUS_HIBERNATING	BIT(0)
+
 struct ec_params_pd_status {
-	int8_t batt_soc; /* battery state of charge */
+	uint8_t status;       /* EC status */
+	int8_t batt_soc;      /* battery state of charge */
+	uint8_t charge_state; /* charging state (from enum pd_charge_state) */
 } __ec_align1;
 
 /* Status of PD being sent back to EC */
+#define PD_STATUS_HOST_EVENT      BIT(0) /* Forward host event to AP */
+#define PD_STATUS_IN_RW           BIT(1) /* Running RW image */
+#define PD_STATUS_JUMPED_TO_IMAGE BIT(2) /* Current image was jumped to */
+#define PD_STATUS_TCPC_ALERT_0    BIT(3) /* Alert active in port 0 TCPC */
+#define PD_STATUS_TCPC_ALERT_1    BIT(4) /* Alert active in port 1 TCPC */
+#define PD_STATUS_TCPC_ALERT_2    BIT(5) /* Alert active in port 2 TCPC */
+#define PD_STATUS_TCPC_ALERT_3    BIT(6) /* Alert active in port 3 TCPC */
+#define PD_STATUS_EC_INT_ACTIVE  (PD_STATUS_TCPC_ALERT_0 | \
+				      PD_STATUS_TCPC_ALERT_1 | \
+				      PD_STATUS_HOST_EVENT)
 struct ec_response_pd_status {
-	int8_t status;        /* PD MCU status */
-	uint32_t curr_lim_ma; /* input current limit */
+	uint32_t curr_lim_ma;       /* input current limit */
+	uint16_t status;            /* PD MCU status */
+	int8_t active_charge_port;  /* active charging port */
 } __ec_align_size1;
 
+/* AP to PD MCU host event status command, cleared on read */
+#define EC_CMD_PD_HOST_EVENT_STATUS 0x0104
+
+/* PD MCU host event status bits */
+#define PD_EVENT_UPDATE_DEVICE     BIT(0)
+#define PD_EVENT_POWER_CHANGE      BIT(1)
+#define PD_EVENT_IDENTITY_RECEIVED BIT(2)
+#define PD_EVENT_DATA_SWAP         BIT(3)
+struct ec_response_host_event_status {
+	uint32_t status;      /* PD MCU host event status */
+} __ec_align4;
+
 /* Set USB type-C port role and muxes */
 #define EC_CMD_USB_PD_CONTROL 0x0101
 
@@ -4349,6 +4411,8 @@ enum usb_pd_control_role {
 	USB_PD_CTRL_ROLE_TOGGLE_OFF = 2,
 	USB_PD_CTRL_ROLE_FORCE_SINK = 3,
 	USB_PD_CTRL_ROLE_FORCE_SOURCE = 4,
+	USB_PD_CTRL_ROLE_FREEZE = 5,
+	USB_PD_CTRL_ROLE_COUNT
 };
 
 enum usb_pd_control_mux {
@@ -4358,6 +4422,7 @@ enum usb_pd_control_mux {
 	USB_PD_CTRL_MUX_DP = 3,
 	USB_PD_CTRL_MUX_DOCK = 4,
 	USB_PD_CTRL_MUX_AUTO = 5,
+	USB_PD_CTRL_MUX_COUNT
 };
 
 enum usb_pd_control_swap {
@@ -4387,6 +4452,13 @@ struct ec_params_usb_pd_control {
 #define PD_CTRL_RESP_ROLE_USB_COMM      BIT(5) /* Partner USB comm capable */
 #define PD_CTRL_RESP_ROLE_EXT_POWERED   BIT(6) /* Partner externally powerd */
 
+struct ec_response_usb_pd_control {
+	uint8_t enabled;
+	uint8_t role;
+	uint8_t polarity;
+	uint8_t state;
+} __ec_align1;
+
 struct ec_response_usb_pd_control_v1 {
 	uint8_t enabled;
 	uint8_t role;
@@ -4394,6 +4466,25 @@ struct ec_response_usb_pd_control_v1 {
 	char state[32];
 } __ec_align1;
 
+/* Values representing usbc PD CC state */
+#define USBC_PD_CC_NONE		0 /* No accessory connected */
+#define USBC_PD_CC_NO_UFP	1 /* No UFP accessory connected */
+#define USBC_PD_CC_AUDIO_ACC	2 /* Audio accessory connected */
+#define USBC_PD_CC_DEBUG_ACC	3 /* Debug accessory connected */
+#define USBC_PD_CC_UFP_ATTACHED	4 /* UFP attached to usbc */
+#define USBC_PD_CC_DFP_ATTACHED	5 /* DPF attached to usbc */
+
+struct ec_response_usb_pd_control_v2 {
+	uint8_t enabled;
+	uint8_t role;
+	uint8_t polarity;
+	char state[32];
+	uint8_t cc_state; /* USBC_PD_CC_*Encoded cc state */
+	uint8_t dp_mode;  /* Current DP pin mode (MODE_DP_PIN_[A-E]) */
+	/* CL:1500994 Current cable type */
+	uint8_t reserved_cable_type;
+} __ec_align1;
+
 #define EC_CMD_USB_PD_PORTS 0x0102
 
 /* Maximum number of PD ports on a device, num_ports will be <= this */
@@ -4421,6 +4512,7 @@ enum usb_chg_type {
 	USB_CHG_TYPE_OTHER,
 	USB_CHG_TYPE_VBUS,
 	USB_CHG_TYPE_UNKNOWN,
+	USB_CHG_TYPE_DEDICATED,
 };
 enum usb_power_roles {
 	USB_PD_PORT_POWER_DISCONNECTED,
@@ -4445,9 +4537,6 @@ struct ec_response_usb_pd_power_info {
 	uint32_t max_power;
 } __ec_align4;
 
-struct ec_params_usb_pd_info_request {
-	uint8_t port;
-} __ec_align1;
 
 /*
  * This command will return the number of USB PD charge port + the number
@@ -4459,6 +4548,46 @@ struct ec_response_charge_port_count {
 	uint8_t port_count;
 } __ec_align1;
 
+/* Write USB-PD device FW */
+#define EC_CMD_USB_PD_FW_UPDATE 0x0110
+
+enum usb_pd_fw_update_cmds {
+	USB_PD_FW_REBOOT,
+	USB_PD_FW_FLASH_ERASE,
+	USB_PD_FW_FLASH_WRITE,
+	USB_PD_FW_ERASE_SIG,
+};
+
+struct ec_params_usb_pd_fw_update {
+	uint16_t dev_id;
+	uint8_t cmd;
+	uint8_t port;
+	uint32_t size;     /* Size to write in bytes */
+	/* Followed by data to write */
+} __ec_align4;
+
+/* Write USB-PD Accessory RW_HASH table entry */
+#define EC_CMD_USB_PD_RW_HASH_ENTRY 0x0111
+/* RW hash is first 20 bytes of SHA-256 of RW section */
+#define PD_RW_HASH_SIZE 20
+struct ec_params_usb_pd_rw_hash_entry {
+	uint16_t dev_id;
+	uint8_t dev_rw_hash[PD_RW_HASH_SIZE];
+	uint8_t reserved;        /*
+				  * For alignment of current_image
+				  * TODO(rspangler) but it's not aligned!
+				  * Should have been reserved[2].
+				  */
+	uint32_t current_image;  /* One of ec_current_image */
+} __ec_align1;
+
+/* Read USB-PD Accessory info */
+#define EC_CMD_USB_PD_DEV_INFO 0x0112
+
+struct ec_params_usb_pd_info_request {
+	uint8_t port;
+} __ec_align1;
+
 /* Read USB-PD Device discovery info */
 #define EC_CMD_USB_PD_DISCOVERY 0x0113
 struct ec_params_usb_pd_discovery_entry {
@@ -4481,7 +4610,11 @@ struct ec_params_charge_port_override {
 	int16_t override_port; /* Override port# */
 } __ec_align2;
 
-/* Read (and delete) one entry of PD event log */
+/*
+ * Read (and delete) one entry of PD event log.
+ * TODO(crbug.com/751742): Make this host command more generic to accommodate
+ * future non-PD logs that use the same internal EC event_log.
+ */
 #define EC_CMD_PD_GET_LOG_ENTRY 0x0115
 
 struct ec_response_pd_log {
@@ -4569,6 +4702,60 @@ struct mcdp_info {
 #define MCDP_CHIPID(chipid) ((chipid[0] << 8) | chipid[1])
 #define MCDP_FAMILY(family) ((family[0] << 8) | family[1])
 
+/* Get/Set USB-PD Alternate mode info */
+#define EC_CMD_USB_PD_GET_AMODE 0x0116
+struct ec_params_usb_pd_get_mode_request {
+	uint16_t svid_idx; /* SVID index to get */
+	uint8_t port;      /* port */
+} __ec_align_size1;
+
+struct ec_params_usb_pd_get_mode_response {
+	uint16_t svid;   /* SVID */
+	uint16_t opos;    /* Object Position */
+	uint32_t vdo[6]; /* Mode VDOs */
+} __ec_align4;
+
+#define EC_CMD_USB_PD_SET_AMODE 0x0117
+
+enum pd_mode_cmd {
+	PD_EXIT_MODE = 0,
+	PD_ENTER_MODE = 1,
+	/* Not a command.  Do NOT remove. */
+	PD_MODE_CMD_COUNT,
+};
+
+struct ec_params_usb_pd_set_mode_request {
+	uint32_t cmd;  /* enum pd_mode_cmd */
+	uint16_t svid; /* SVID to set */
+	uint8_t opos;  /* Object Position */
+	uint8_t port;  /* port */
+} __ec_align4;
+
+/* Ask the PD MCU to record a log of a requested type */
+#define EC_CMD_PD_WRITE_LOG_ENTRY 0x0118
+
+struct ec_params_pd_write_log_entry {
+	uint8_t type; /* event type : see PD_EVENT_xx above */
+	uint8_t port; /* port#, or 0 for events unrelated to a given port */
+} __ec_align1;
+
+
+/* Control USB-PD chip */
+#define EC_CMD_PD_CONTROL 0x0119
+
+enum ec_pd_control_cmd {
+	PD_SUSPEND = 0,      /* Suspend the PD chip (EC: stop talking to PD) */
+	PD_RESUME,           /* Resume the PD chip (EC: start talking to PD) */
+	PD_RESET,            /* Force reset the PD chip */
+	PD_CONTROL_DISABLE,  /* Disable further calls to this command */
+	PD_CHIP_ON,          /* Power on the PD chip */
+};
+
+struct ec_params_pd_control {
+	uint8_t chip;         /* chip id */
+	uint8_t subcmd;
+} __ec_align1;
+
 /* Get info about USB-C SS muxes */
 #define EC_CMD_USB_PD_MUX_INFO 0x011A
 
@@ -4581,10 +4768,43 @@ struct ec_params_usb_pd_mux_info {
 #define USB_PD_MUX_DP_ENABLED        BIT(1) /* DP connected */
 #define USB_PD_MUX_POLARITY_INVERTED BIT(2) /* CC line Polarity inverted */
 #define USB_PD_MUX_HPD_IRQ           BIT(3) /* HPD IRQ is asserted */
+#define USB_PD_MUX_HPD_LVL           BIT(4) /* HPD level is asserted */
 
 struct ec_response_usb_pd_mux_info {
 	uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */
 } __ec_align1;
+
+#define EC_CMD_PD_CHIP_INFO		0x011B
+
+struct ec_params_pd_chip_info {
+	uint8_t port;	/* USB-C port number */
+	uint8_t renew;	/* Force renewal */
+} __ec_align1;
+
+struct ec_response_pd_chip_info {
+	uint16_t vendor_id;
+	uint16_t product_id;
+	uint16_t device_id;
+	union {
+		uint8_t fw_version_string[8];
+		uint64_t fw_version_number;
+	};
+} __ec_align2;
+
+struct ec_response_pd_chip_info_v1 {
+	uint16_t vendor_id;
+	uint16_t product_id;
+	uint16_t device_id;
+	union {
+		uint8_t fw_version_string[8];
+		uint64_t fw_version_number;
+	};
+	union {
+		uint8_t min_req_fw_version_string[8];
+		uint64_t min_req_fw_version_number;
+	};
+} __ec_align2;
+
 /*****************************************************************************/
 /*
  * Reserve a range of host commands for board-specific, experimental, or
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 20/30] mfd: cros_ec: Add API for keyboard testing
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (18 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 19/30] mfd: cros_ec: Complete Power and USB PD API Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 21/30] mfd: cros_ec: Add Hibernate API Gwendal Grignou
                   ` (10 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Add command to allow keyboard testing in factory.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 4784f3634793..88d08aa85738 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -3142,6 +3142,17 @@ struct ec_params_mkbp_simulate_key {
 	uint8_t pressed;
 } __ec_align1;
 
+#define EC_CMD_GET_KEYBOARD_ID 0x0063
+
+struct ec_response_keyboard_id {
+	uint32_t keyboard_id;
+} __ec_align4;
+
+enum keyboard_id {
+	KEYBOARD_ID_UNSUPPORTED = 0,
+	KEYBOARD_ID_UNREADABLE = 0xffffffff,
+};
+
 /* Configure keyboard scanning */
 #define EC_CMD_MKBP_SET_CONFIG 0x0064
 #define EC_CMD_MKBP_GET_CONFIG 0x0065
@@ -3390,6 +3401,13 @@ struct ec_response_get_next_event_v1 {
 #define EC_MKBP_TABLET_MODE	1
 #define EC_MKBP_BASE_ATTACHED	2
 
+/* Run keyboard factory test scanning */
+#define EC_CMD_KEYBOARD_FACTORY_TEST 0x0068
+
+struct ec_response_keyboard_factory_test {
+	uint16_t shorted;	/* Keyboard pins are shorted */
+} __ec_align2;
+
 /* Fingerprint events in 'fp_events' for EC_MKBP_EVENT_FINGERPRINT */
 #define EC_MKBP_FP_RAW_EVENT(fp_events) ((fp_events) & 0x00FFFFFF)
 #define EC_MKBP_FP_ERRCODE(fp_events)   ((fp_events) & 0x0000000F)
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 21/30] mfd: cros_ec: Add Hibernate API
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (19 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 20/30] mfd: cros_ec: Add API for keyboard testing Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 22/30] mfd: cros_ec: Add Smart Battery Firmware update API Gwendal Grignou
                   ` (9 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Add support for controlling hibernation of the Embedded Controller.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 129 ++++++++++++++++++++++++++-
 1 file changed, 127 insertions(+), 2 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 88d08aa85738..7f98c6e63ad1 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -4045,6 +4045,40 @@ struct ec_params_dedicated_charger_limit {
 	uint16_t voltage_lim; /* in mV */
 } __ec_align2;
 
+/*****************************************************************************/
+/* Hibernate/Deep Sleep Commands */
+
+/* Set the delay before going into hibernation. */
+#define EC_CMD_HIBERNATION_DELAY 0x00A8
+
+struct ec_params_hibernation_delay {
+	/*
+	 * Seconds to wait in G3 before hibernate.  Pass in 0 to read the
+	 * current settings without changing them.
+	 */
+	uint32_t seconds;
+} __ec_align4;
+
+struct ec_response_hibernation_delay {
+	/*
+	 * The current time in seconds in which the system has been in the G3
+	 * state.  This value is reset if the EC transitions out of G3.
+	 */
+	uint32_t time_g3;
+
+	/*
+	 * The current time remaining in seconds until the EC should hibernate.
+	 * This value is also reset if the EC transitions out of G3.
+	 */
+	uint32_t time_remaining;
+
+	/*
+	 * The current time in seconds that the EC should wait in G3 before
+	 * hibernating.
+	 */
+	uint32_t hibernate_delay;
+} __ec_align4;
+
 /* Inform the EC when entering a sleep state */
 #define EC_CMD_HOST_SLEEP_EVENT 0x00A9
 
@@ -4052,13 +4086,102 @@ enum host_sleep_event {
 	HOST_SLEEP_EVENT_S3_SUSPEND   = 1,
 	HOST_SLEEP_EVENT_S3_RESUME    = 2,
 	HOST_SLEEP_EVENT_S0IX_SUSPEND = 3,
-	HOST_SLEEP_EVENT_S0IX_RESUME  = 4
+	HOST_SLEEP_EVENT_S0IX_RESUME  = 4,
+	/* S3 suspend with additional enabled wake sources */
+	HOST_SLEEP_EVENT_S3_WAKEABLE_SUSPEND = 5,
 };
 
 struct ec_params_host_sleep_event {
 	uint8_t sleep_event;
 } __ec_align1;
 
+/*
+ * Use a default timeout value (CONFIG_SLEEP_TIMEOUT_MS) for detecting sleep
+ * transition failures
+ */
+#define EC_HOST_SLEEP_TIMEOUT_DEFAULT 0
+
+/* Disable timeout detection for this sleep transition */
+#define EC_HOST_SLEEP_TIMEOUT_INFINITE 0xFFFF
+
+struct ec_params_host_sleep_event_v1 {
+	/* The type of sleep being entered or exited. */
+	uint8_t sleep_event;
+
+	/* Padding */
+	uint8_t reserved;
+	union {
+		/* Parameters that apply for suspend messages. */
+		struct {
+			/*
+			 * The timeout in milliseconds between when this message
+			 * is received and when the EC will declare sleep
+			 * transition failure if the sleep signal is not
+			 * asserted.
+			 */
+			uint16_t sleep_timeout_ms;
+		} suspend_params;
+
+		/* No parameters for non-suspend messages. */
+	};
+} __ec_align2;
+
+/* A timeout occurred when this bit is set */
+#define EC_HOST_RESUME_SLEEP_TIMEOUT 0x80000000
+
+/*
+ * The mask defining which bits correspond to the number of sleep transitions,
+ * as well as the maximum number of suspend line transitions that will be
+ * reported back to the host.
+ */
+#define EC_HOST_RESUME_SLEEP_TRANSITIONS_MASK 0x7FFFFFFF
+
+struct ec_response_host_sleep_event_v1 {
+	union {
+		/* Response fields that apply for resume messages. */
+		struct {
+			/*
+			 * The number of sleep power signal transitions that
+			 * occurred since the suspend message. The high bit
+			 * indicates a timeout occurred.
+			 */
+			uint32_t sleep_transitions;
+		} resume_response;
+
+		/* No response fields for non-resume messages. */
+	};
+} __ec_align4;
+
+/*****************************************************************************/
+/* Device events */
+#define EC_CMD_DEVICE_EVENT 0x00AA
+
+enum ec_device_event {
+	EC_DEVICE_EVENT_TRACKPAD,
+	EC_DEVICE_EVENT_DSP,
+	EC_DEVICE_EVENT_WIFI,
+};
+
+enum ec_device_event_param {
+	/* Get and clear pending device events */
+	EC_DEVICE_EVENT_PARAM_GET_CURRENT_EVENTS,
+	/* Get device event mask */
+	EC_DEVICE_EVENT_PARAM_GET_ENABLED_EVENTS,
+	/* Set device event mask */
+	EC_DEVICE_EVENT_PARAM_SET_ENABLED_EVENTS,
+};
+
+#define EC_DEVICE_EVENT_MASK(event_code) BIT(event_code % 32)
+
+struct ec_params_device_event {
+	uint32_t event_mask;
+	uint8_t param;
+} __ec_align_size1;
+
+struct ec_response_device_event {
+	uint32_t event_mask;
+} __ec_align4;
+
 /*****************************************************************************/
 /* Smart battery pass-through */
 
@@ -4304,12 +4427,14 @@ enum ec_reboot_cmd {
 	/* (command 3 was jump to RW-B) */
 	EC_REBOOT_COLD = 4,          /* Cold-reboot */
 	EC_REBOOT_DISABLE_JUMP = 5,  /* Disable jump until next reboot */
-	EC_REBOOT_HIBERNATE = 6      /* Hibernate EC */
+	EC_REBOOT_HIBERNATE = 6,     /* Hibernate EC */
+	EC_REBOOT_HIBERNATE_CLEAR_AP_OFF = 7, /* and clears AP_OFF flag */
 };
 
 /* Flags for ec_params_reboot_ec.reboot_flags */
 #define EC_REBOOT_FLAG_RESERVED0      BIT(0)  /* Was recovery request */
 #define EC_REBOOT_FLAG_ON_AP_SHUTDOWN BIT(1)  /* Reboot after AP shutdown */
+#define EC_REBOOT_FLAG_SWITCH_RW_SLOT BIT(2)  /* Switch RW slot */
 
 struct ec_params_reboot_ec {
 	uint8_t cmd;           /* enum ec_reboot_cmd */
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 22/30] mfd: cros_ec: Add Smart Battery Firmware update API
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (20 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 21/30] mfd: cros_ec: Add Hibernate API Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 23/30] mfd: cros_ec: Add I2C passthru protection API Gwendal Grignou
                   ` (8 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Add API to update battery firmware.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 73 ++++++++++++++++++++++++++++
 1 file changed, 73 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 7f98c6e63ad1..49ea905cfd18 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -4243,6 +4243,79 @@ struct ec_response_battery_vendor_param {
 	uint32_t value;
 } __ec_align4;
 
+/*****************************************************************************/
+/*
+ * Smart Battery Firmware Update Commands
+ */
+#define EC_CMD_SB_FW_UPDATE 0x00B5
+
+enum ec_sb_fw_update_subcmd {
+	EC_SB_FW_UPDATE_PREPARE  = 0x0,
+	EC_SB_FW_UPDATE_INFO     = 0x1, /*query sb info */
+	EC_SB_FW_UPDATE_BEGIN    = 0x2, /*check if protected */
+	EC_SB_FW_UPDATE_WRITE    = 0x3, /*check if protected */
+	EC_SB_FW_UPDATE_END      = 0x4,
+	EC_SB_FW_UPDATE_STATUS   = 0x5,
+	EC_SB_FW_UPDATE_PROTECT  = 0x6,
+	EC_SB_FW_UPDATE_MAX      = 0x7,
+};
+
+#define SB_FW_UPDATE_CMD_WRITE_BLOCK_SIZE 32
+#define SB_FW_UPDATE_CMD_STATUS_SIZE 2
+#define SB_FW_UPDATE_CMD_INFO_SIZE 8
+
+struct ec_sb_fw_update_header {
+	uint16_t subcmd;  /* enum ec_sb_fw_update_subcmd */
+	uint16_t fw_id;   /* firmware id */
+} __ec_align4;
+
+struct ec_params_sb_fw_update {
+	struct ec_sb_fw_update_header hdr;
+	union {
+		/* EC_SB_FW_UPDATE_PREPARE  = 0x0 */
+		/* EC_SB_FW_UPDATE_INFO     = 0x1 */
+		/* EC_SB_FW_UPDATE_BEGIN    = 0x2 */
+		/* EC_SB_FW_UPDATE_END      = 0x4 */
+		/* EC_SB_FW_UPDATE_STATUS   = 0x5 */
+		/* EC_SB_FW_UPDATE_PROTECT  = 0x6 */
+		/* Those have no args */
+
+		/* EC_SB_FW_UPDATE_WRITE    = 0x3 */
+		struct __ec_align4 {
+			uint8_t  data[SB_FW_UPDATE_CMD_WRITE_BLOCK_SIZE];
+		} write;
+	};
+} __ec_align4;
+
+struct ec_response_sb_fw_update {
+	union {
+		/* EC_SB_FW_UPDATE_INFO     = 0x1 */
+		struct __ec_align1 {
+			uint8_t data[SB_FW_UPDATE_CMD_INFO_SIZE];
+		} info;
+
+		/* EC_SB_FW_UPDATE_STATUS   = 0x5 */
+		struct __ec_align1 {
+			uint8_t data[SB_FW_UPDATE_CMD_STATUS_SIZE];
+		} status;
+	};
+} __ec_align1;
+
+/*
+ * Entering Verified Boot Mode Command
+ * Default mode is VBOOT_MODE_NORMAL if EC did not receive this command.
+ * Valid Modes are: normal, developer, and recovery.
+ */
+#define EC_CMD_ENTERING_MODE 0x00B6
+
+struct ec_params_entering_mode {
+	int vboot_mode;
+} __ec_align4;
+
+#define VBOOT_MODE_NORMAL    0
+#define VBOOT_MODE_DEVELOPER 1
+#define VBOOT_MODE_RECOVERY  2
+
 /*****************************************************************************/
 /*
  * HDMI CEC commands
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 23/30] mfd: cros_ec: Add I2C passthru protection API
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (21 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 22/30] mfd: cros_ec: Add Smart Battery Firmware update API Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 24/30] mfd: cros_ec: Add API for EC-EC communication Gwendal Grignou
                   ` (7 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Prevent direct i2c access to device behind EC when not in development mode.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 49ea905cfd18..59ad6bae3f9b 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -4316,6 +4316,28 @@ struct ec_params_entering_mode {
 #define VBOOT_MODE_DEVELOPER 1
 #define VBOOT_MODE_RECOVERY  2
 
+/*****************************************************************************/
+/*
+ * I2C passthru protection command: Protects I2C tunnels against access on
+ * certain addresses (board-specific).
+ */
+#define EC_CMD_I2C_PASSTHRU_PROTECT 0x00B7
+
+enum ec_i2c_passthru_protect_subcmd {
+	EC_CMD_I2C_PASSTHRU_PROTECT_STATUS = 0x0,
+	EC_CMD_I2C_PASSTHRU_PROTECT_ENABLE = 0x1,
+};
+
+struct ec_params_i2c_passthru_protect {
+	uint8_t subcmd;
+	uint8_t port;		/* I2C port number */
+} __ec_align1;
+
+struct ec_response_i2c_passthru_protect {
+	uint8_t status;		/* Status flags (0: unlocked, 1: locked) */
+} __ec_align1;
+
+
 /*****************************************************************************/
 /*
  * HDMI CEC commands
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 24/30] mfd: cros_ec: Add API for EC-EC communication
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (22 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 23/30] mfd: cros_ec: Add I2C passthru protection API Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-08 23:22   ` Benson Leung
  2019-05-03 22:02 ` [PATCH v2 25/30] mfd: cros_ec: Add API for Touchpad support Gwendal Grignou
                   ` (6 subsequent siblings)
  30 siblings, 1 reply; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Allow EC to talk to other ECs that are not presented to the host.
Neeed when EC are present in detachable keyboard.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 95 ++++++++++++++++++++++++++++
 1 file changed, 95 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 59ad6bae3f9b..52fd9bfafc7f 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -5043,6 +5043,101 @@ struct ec_response_pd_chip_info_v1 {
 	};
 } __ec_align2;
 
+/*****************************************************************************/
+/* EC-EC communication commands: range 0x0600-0x06FF */
+
+#define EC_COMM_TEXT_MAX 8
+
+/*
+ * Get battery static information, i.e. information that never changes, or
+ * very infrequently.
+ */
+#define EC_CMD_BATTERY_GET_STATIC 0x0600
+
+/**
+ * struct ec_params_battery_static_info - Battery static info parameters
+ * @index: Battery index.
+ */
+struct ec_params_battery_static_info {
+	uint8_t index;
+} __ec_align_size1;
+
+/**
+ * struct ec_response_battery_static_info - Battery static info response
+ * @design_capacity: Battery Design Capacity (mAh)
+ * @design_voltage: Battery Design Voltage (mV)
+ * @manufacturer: Battery Manufacturer String
+ * @model: Battery Model Number String
+ * @serial: Battery Serial Number String
+ * @type: Battery Type String
+ * @cycle_count: Battery Cycle Count
+ */
+struct ec_response_battery_static_info {
+	uint16_t design_capacity;
+	uint16_t design_voltage;
+	char manufacturer[EC_COMM_TEXT_MAX];
+	char model[EC_COMM_TEXT_MAX];
+	char serial[EC_COMM_TEXT_MAX];
+	char type[EC_COMM_TEXT_MAX];
+	/* TODO(crbug.com/795991): Consider moving to dynamic structure. */
+	uint32_t cycle_count;
+} __ec_align4;
+
+/*
+ * Get battery dynamic information, i.e. information that is likely to change
+ * every time it is read.
+ */
+#define EC_CMD_BATTERY_GET_DYNAMIC 0x0601
+
+/**
+ * struct ec_params_battery_dynamic_info - Battery dynamic info parameters
+ * @index: Battery index.
+ */
+struct ec_params_battery_dynamic_info {
+	uint8_t index;
+} __ec_align_size1;
+
+/**
+ * struct ec_response_battery_dynamic_info - Battery dynamic info response
+ * @actual_voltage: Battery voltage (mV)
+ * @actual_current: Battery current (mA); negative=discharging
+ * @remaining_capacity: Remaining capacity (mAh)
+ * @full_capacity: Capacity (mAh, might change occasionally)
+ * @flags: Flags, see EC_BATT_FLAG_*
+ * @desired_voltage: Charging voltage desired by battery (mV)
+ * @desired_current: Charging current desired by battery (mA)
+ */
+struct ec_response_battery_dynamic_info {
+	int16_t actual_voltage;
+	int16_t actual_current;
+	int16_t remaining_capacity;
+	int16_t full_capacity;
+	int16_t flags;
+	int16_t desired_voltage;
+	int16_t desired_current;
+} __ec_align2;
+
+/*
+ * Control charger chip. Used to control charger chip on the slave.
+ */
+#define EC_CMD_CHARGER_CONTROL 0x0602
+
+/**
+ * struct ec_params_charger_control - Charger control parameters
+ * @max_current: Charger current (mA). Positive to allow base to draw up to
+ *     max_current and (possibly) charge battery, negative to request current
+ *     from base (OTG).
+ * @otg_voltage: Voltage (mV) to use in OTG mode, ignored if max_current is
+ *     >= 0.
+ * @allow_charging: Allow base battery charging (only makes sense if
+ *     max_current > 0).
+ */
+struct ec_params_charger_control {
+	int16_t max_current;
+	uint16_t otg_voltage;
+	uint8_t allow_charging;
+} __ec_align_size1;
+
 /*****************************************************************************/
 /*
  * Reserve a range of host commands for board-specific, experimental, or
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 25/30] mfd: cros_ec: Add API for Touchpad support
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (23 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 24/30] mfd: cros_ec: Add API for EC-EC communication Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 26/30] mfd: cros_ec: Add API for Fingerprint support Gwendal Grignou
                   ` (5 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Add API to control touchpad presented by Embedded Controller.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 52fd9bfafc7f..1d0311df44d3 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -5043,6 +5043,32 @@ struct ec_response_pd_chip_info_v1 {
 	};
 } __ec_align2;
 
+/*****************************************************************************/
+/* Touchpad MCU commands: range 0x0500-0x05FF */
+
+/* Perform touchpad self test */
+#define EC_CMD_TP_SELF_TEST 0x0500
+
+/* Get number of frame types, and the size of each type */
+#define EC_CMD_TP_FRAME_INFO 0x0501
+
+struct ec_response_tp_frame_info {
+	uint32_t n_frames;
+	uint32_t frame_sizes[0];
+} __ec_align4;
+
+/* Create a snapshot of current frame readings */
+#define EC_CMD_TP_FRAME_SNAPSHOT 0x0502
+
+/* Read the frame */
+#define EC_CMD_TP_FRAME_GET 0x0503
+
+struct ec_params_tp_frame_get {
+	uint32_t frame_index;
+	uint32_t offset;
+	uint32_t size;
+} __ec_align4;
+
 /*****************************************************************************/
 /* EC-EC communication commands: range 0x0600-0x06FF */
 
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 26/30] mfd: cros_ec: Add API for Fingerprint support
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (24 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 25/30] mfd: cros_ec: Add API for Touchpad support Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 27/30] mfd: cros_ec: Add API for rwsig Gwendal Grignou
                   ` (4 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Add API for fingerprint sensor presented by embedded controller.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 228 +++++++++++++++++++++++++++
 1 file changed, 228 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 1d0311df44d3..4a9ac3861bdd 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -5043,6 +5043,234 @@ struct ec_response_pd_chip_info_v1 {
 	};
 } __ec_align2;
 
+/*****************************************************************************/
+/* Fingerprint MCU commands: range 0x0400-0x040x */
+
+/* Fingerprint SPI sensor passthru command: prototyping ONLY */
+#define EC_CMD_FP_PASSTHRU 0x0400
+
+#define EC_FP_FLAG_NOT_COMPLETE 0x1
+
+struct ec_params_fp_passthru {
+	uint16_t len;		/* Number of bytes to write then read */
+	uint16_t flags;		/* EC_FP_FLAG_xxx */
+	uint8_t data[];		/* Data to send */
+} __ec_align2;
+
+/* Configure the Fingerprint MCU behavior */
+#define EC_CMD_FP_MODE 0x0402
+
+/* Put the sensor in its lowest power mode */
+#define FP_MODE_DEEPSLEEP      BIT(0)
+/* Wait to see a finger on the sensor */
+#define FP_MODE_FINGER_DOWN    BIT(1)
+/* Poll until the finger has left the sensor */
+#define FP_MODE_FINGER_UP      BIT(2)
+/* Capture the current finger image */
+#define FP_MODE_CAPTURE        BIT(3)
+/* Finger enrollment session on-going */
+#define FP_MODE_ENROLL_SESSION BIT(4)
+/* Enroll the current finger image */
+#define FP_MODE_ENROLL_IMAGE   BIT(5)
+/* Try to match the current finger image */
+#define FP_MODE_MATCH          BIT(6)
+/* Reset and re-initialize the sensor. */
+#define FP_MODE_RESET_SENSOR   BIT(7)
+/* special value: don't change anything just read back current mode */
+#define FP_MODE_DONT_CHANGE    BIT(31)
+
+#define FP_VALID_MODES (FP_MODE_DEEPSLEEP      | \
+			FP_MODE_FINGER_DOWN    | \
+			FP_MODE_FINGER_UP      | \
+			FP_MODE_CAPTURE        | \
+			FP_MODE_ENROLL_SESSION | \
+			FP_MODE_ENROLL_IMAGE   | \
+			FP_MODE_MATCH          | \
+			FP_MODE_RESET_SENSOR   | \
+			FP_MODE_DONT_CHANGE)
+
+/* Capture types defined in bits [30..28] */
+#define FP_MODE_CAPTURE_TYPE_SHIFT 28
+#define FP_MODE_CAPTURE_TYPE_MASK  (0x7 << FP_MODE_CAPTURE_TYPE_SHIFT)
+/*
+ * This enum must remain ordered, if you add new values you must ensure that
+ * FP_CAPTURE_TYPE_MAX is still the last one.
+ */
+enum fp_capture_type {
+	/* Full blown vendor-defined capture (produces 'frame_size' bytes) */
+	FP_CAPTURE_VENDOR_FORMAT = 0,
+	/* Simple raw image capture (produces width x height x bpp bits) */
+	FP_CAPTURE_SIMPLE_IMAGE = 1,
+	/* Self test pattern (e.g. checkerboard) */
+	FP_CAPTURE_PATTERN0 = 2,
+	/* Self test pattern (e.g. inverted checkerboard) */
+	FP_CAPTURE_PATTERN1 = 3,
+	/* Capture for Quality test with fixed contrast */
+	FP_CAPTURE_QUALITY_TEST = 4,
+	/* Capture for pixel reset value test */
+	FP_CAPTURE_RESET_TEST = 5,
+	FP_CAPTURE_TYPE_MAX,
+};
+/* Extracts the capture type from the sensor 'mode' word */
+#define FP_CAPTURE_TYPE(mode) (((mode) & FP_MODE_CAPTURE_TYPE_MASK) \
+				       >> FP_MODE_CAPTURE_TYPE_SHIFT)
+
+struct ec_params_fp_mode {
+	uint32_t mode; /* as defined by FP_MODE_ constants */
+} __ec_align4;
+
+struct ec_response_fp_mode {
+	uint32_t mode; /* as defined by FP_MODE_ constants */
+} __ec_align4;
+
+/* Retrieve Fingerprint sensor information */
+#define EC_CMD_FP_INFO 0x0403
+
+/* Number of dead pixels detected on the last maintenance */
+#define FP_ERROR_DEAD_PIXELS(errors) ((errors) & 0x3FF)
+/* Unknown number of dead pixels detected on the last maintenance */
+#define FP_ERROR_DEAD_PIXELS_UNKNOWN (0x3FF)
+/* No interrupt from the sensor */
+#define FP_ERROR_NO_IRQ    BIT(12)
+/* SPI communication error */
+#define FP_ERROR_SPI_COMM  BIT(13)
+/* Invalid sensor Hardware ID */
+#define FP_ERROR_BAD_HWID  BIT(14)
+/* Sensor initialization failed */
+#define FP_ERROR_INIT_FAIL BIT(15)
+
+struct ec_response_fp_info_v0 {
+	/* Sensor identification */
+	uint32_t vendor_id;
+	uint32_t product_id;
+	uint32_t model_id;
+	uint32_t version;
+	/* Image frame characteristics */
+	uint32_t frame_size;
+	uint32_t pixel_format; /* using V4L2_PIX_FMT_ */
+	uint16_t width;
+	uint16_t height;
+	uint16_t bpp;
+	uint16_t errors; /* see FP_ERROR_ flags above */
+} __ec_align4;
+
+struct ec_response_fp_info {
+	/* Sensor identification */
+	uint32_t vendor_id;
+	uint32_t product_id;
+	uint32_t model_id;
+	uint32_t version;
+	/* Image frame characteristics */
+	uint32_t frame_size;
+	uint32_t pixel_format; /* using V4L2_PIX_FMT_ */
+	uint16_t width;
+	uint16_t height;
+	uint16_t bpp;
+	uint16_t errors; /* see FP_ERROR_ flags above */
+	/* Template/finger current information */
+	uint32_t template_size;  /* max template size in bytes */
+	uint16_t template_max;   /* maximum number of fingers/templates */
+	uint16_t template_valid; /* number of valid fingers/templates */
+	uint32_t template_dirty; /* bitmap of templates with MCU side changes */
+	uint32_t template_version; /* version of the template format */
+} __ec_align4;
+
+/* Get the last captured finger frame or a template content */
+#define EC_CMD_FP_FRAME 0x0404
+
+/* constants defining the 'offset' field which also contains the frame index */
+#define FP_FRAME_INDEX_SHIFT       28
+/* Frame buffer where the captured image is stored */
+#define FP_FRAME_INDEX_RAW_IMAGE    0
+/* First frame buffer holding a template */
+#define FP_FRAME_INDEX_TEMPLATE     1
+#define FP_FRAME_GET_BUFFER_INDEX(offset) ((offset) >> FP_FRAME_INDEX_SHIFT)
+#define FP_FRAME_OFFSET_MASK       0x0FFFFFFF
+
+/* Version of the format of the encrypted templates. */
+#define FP_TEMPLATE_FORMAT_VERSION 3
+
+/* Constants for encryption parameters */
+#define FP_CONTEXT_NONCE_BYTES 12
+#define FP_CONTEXT_USERID_WORDS (32 / sizeof(uint32_t))
+#define FP_CONTEXT_TAG_BYTES 16
+#define FP_CONTEXT_SALT_BYTES 16
+#define FP_CONTEXT_TPM_BYTES 32
+
+struct ec_fp_template_encryption_metadata {
+	/*
+	 * Version of the structure format (N=3).
+	 */
+	uint16_t struct_version;
+	/* Reserved bytes, set to 0. */
+	uint16_t reserved;
+	/*
+	 * The salt is *only* ever used for key derivation. The nonce is unique,
+	 * a different one is used for every message.
+	 */
+	uint8_t nonce[FP_CONTEXT_NONCE_BYTES];
+	uint8_t salt[FP_CONTEXT_SALT_BYTES];
+	uint8_t tag[FP_CONTEXT_TAG_BYTES];
+};
+
+struct ec_params_fp_frame {
+	/*
+	 * The offset contains the template index or FP_FRAME_INDEX_RAW_IMAGE
+	 * in the high nibble, and the real offset within the frame in
+	 * FP_FRAME_OFFSET_MASK.
+	 */
+	uint32_t offset;
+	uint32_t size;
+} __ec_align4;
+
+/* Load a template into the MCU */
+#define EC_CMD_FP_TEMPLATE 0x0405
+
+/* Flag in the 'size' field indicating that the full template has been sent */
+#define FP_TEMPLATE_COMMIT 0x80000000
+
+struct ec_params_fp_template {
+	uint32_t offset;
+	uint32_t size;
+	uint8_t data[];
+} __ec_align4;
+
+/* Clear the current fingerprint user context and set a new one */
+#define EC_CMD_FP_CONTEXT 0x0406
+
+struct ec_params_fp_context {
+	uint32_t userid[FP_CONTEXT_USERID_WORDS];
+} __ec_align4;
+
+#define EC_CMD_FP_STATS 0x0407
+
+#define FPSTATS_CAPTURE_INV  BIT(0)
+#define FPSTATS_MATCHING_INV BIT(1)
+
+struct ec_response_fp_stats {
+	uint32_t capture_time_us;
+	uint32_t matching_time_us;
+	uint32_t overall_time_us;
+	struct {
+		uint32_t lo;
+		uint32_t hi;
+	} overall_t0;
+	uint8_t timestamps_invalid;
+	int8_t template_matched;
+} __ec_align2;
+
+#define EC_CMD_FP_SEED 0x0408
+struct ec_params_fp_seed {
+	/*
+	 * Version of the structure format (N=3).
+	 */
+	uint16_t struct_version;
+	/* Reserved bytes, set to 0. */
+	uint16_t reserved;
+	/* Seed from the TPM. */
+	uint8_t seed[FP_CONTEXT_TPM_BYTES];
+} __ec_align4;
+
 /*****************************************************************************/
 /* Touchpad MCU commands: range 0x0500-0x05FF */
 
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 27/30] mfd: cros_ec: Add API for rwsig
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (25 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 26/30] mfd: cros_ec: Add API for Fingerprint support Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 28/30] mfd: cros_ec: Add SKU ID and Secure storage API Gwendal Grignou
                   ` (3 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Add command to retrieve signature of image stored in the RW memory
slot(s).

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 4a9ac3861bdd..3d3a37b11002 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -5043,6 +5043,32 @@ struct ec_response_pd_chip_info_v1 {
 	};
 } __ec_align2;
 
+/* Run RW signature verification and get status */
+#define EC_CMD_RWSIG_CHECK_STATUS	0x011C
+
+struct ec_response_rwsig_check_status {
+	uint32_t status;
+} __ec_align4;
+
+/* For controlling RWSIG task */
+#define EC_CMD_RWSIG_ACTION	0x011D
+
+enum rwsig_action {
+	RWSIG_ACTION_ABORT = 0,		/* Abort RWSIG and prevent jumping */
+	RWSIG_ACTION_CONTINUE = 1,	/* Jump to RW immediately */
+};
+
+struct ec_params_rwsig_action {
+	uint32_t action;
+} __ec_align4;
+
+/* Run verification on a slot */
+#define EC_CMD_EFS_VERIFY	0x011E
+
+struct ec_params_efs_verify {
+	uint8_t region;		/* enum ec_flash_region */
+} __ec_align1;
+
 /*****************************************************************************/
 /* Fingerprint MCU commands: range 0x0400-0x040x */
 
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 28/30] mfd: cros_ec: Add SKU ID and Secure storage API
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (26 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 27/30] mfd: cros_ec: Add API for rwsig Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 29/30] mfd: cros_ec: Add Management API entry points Gwendal Grignou
                   ` (2 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Add API to store SKU, Cros board information in EC flash memory.
Add API to store security data in EC.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 107 +++++++++++++++++++++++++++
 1 file changed, 107 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 3d3a37b11002..860a76274334 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -1292,6 +1292,17 @@ struct ec_response_get_features {
 	uint32_t flags[2];
 } __ec_align4;
 
+/*****************************************************************************/
+/* Get the board's SKU ID from EC */
+#define EC_CMD_GET_SKU_ID 0x000E
+
+/* Set SKU ID from AP */
+#define EC_CMD_SET_SKU_ID 0x000F
+
+struct ec_sku_id_info {
+	uint32_t sku_id;
+} __ec_align4;
+
 /*****************************************************************************/
 /* Flash commands */
 
@@ -2902,6 +2913,49 @@ struct ec_response_port80_last_boot {
 	uint16_t code;
 } __ec_align2;
 
+/*****************************************************************************/
+/* Temporary secure storage for host verified boot use */
+
+/* Number of bytes in a vstore slot */
+#define EC_VSTORE_SLOT_SIZE 64
+
+/* Maximum number of vstore slots */
+#define EC_VSTORE_SLOT_MAX 32
+
+/* Get persistent storage info */
+#define EC_CMD_VSTORE_INFO 0x0049
+struct ec_response_vstore_info {
+	/* Indicates which slots are locked */
+	uint32_t slot_locked;
+	/* Total number of slots available */
+	uint8_t slot_count;
+} __ec_align_size1;
+
+/*
+ * Read temporary secure storage
+ *
+ * Response is EC_VSTORE_SLOT_SIZE bytes of data.
+ */
+#define EC_CMD_VSTORE_READ 0x004A
+
+struct ec_params_vstore_read {
+	uint8_t slot; /* Slot to read from */
+} __ec_align1;
+
+struct ec_response_vstore_read {
+	uint8_t data[EC_VSTORE_SLOT_SIZE];
+} __ec_align1;
+
+/*
+ * Write temporary secure storage and lock it.
+ */
+#define EC_CMD_VSTORE_WRITE 0x004B
+
+struct ec_params_vstore_write {
+	uint8_t slot; /* Slot to write to */
+	uint8_t data[EC_VSTORE_SLOT_SIZE];
+} __ec_align1;
+
 /*****************************************************************************/
 /* Thermal engine commands. Note that there are two implementations. We'll
  * reuse the command number, but the data and behavior is incompatible.
@@ -5069,6 +5123,59 @@ struct ec_params_efs_verify {
 	uint8_t region;		/* enum ec_flash_region */
 } __ec_align1;
 
+/*
+ * Retrieve info from Cros Board Info store. Response is based on the data
+ * type. Integers return a uint32. Strings return a string, using the response
+ * size to determine how big it is.
+ */
+#define EC_CMD_GET_CROS_BOARD_INFO	0x011F
+/*
+ * Write info into Cros Board Info on EEPROM. Write fails if the board has
+ * hardware write-protect enabled.
+ */
+#define EC_CMD_SET_CROS_BOARD_INFO	0x0120
+
+enum cbi_data_tag {
+	CBI_TAG_BOARD_VERSION = 0, /* uint32_t or smaller */
+	CBI_TAG_OEM_ID = 1,        /* uint32_t or smaller */
+	CBI_TAG_SKU_ID = 2,        /* uint32_t or smaller */
+	CBI_TAG_DRAM_PART_NUM = 3, /* variable length ascii, nul terminated. */
+	CBI_TAG_OEM_NAME = 4,      /* variable length ascii, nul terminated. */
+	CBI_TAG_MODEL_ID = 5,      /* uint32_t or smaller */
+	CBI_TAG_COUNT,
+};
+
+/*
+ * Flags to control read operation
+ *
+ * RELOAD:  Invalidate cache and read data from EEPROM. Useful to verify
+ *          write was successful without reboot.
+ */
+#define CBI_GET_RELOAD		BIT(0)
+
+struct ec_params_get_cbi {
+	uint32_t tag;		/* enum cbi_data_tag */
+	uint32_t flag;		/* CBI_GET_* */
+} __ec_align4;
+
+/*
+ * Flags to control write behavior.
+ *
+ * NO_SYNC: Makes EC update data in RAM but skip writing to EEPROM. It's
+ *          useful when writing multiple fields in a row.
+ * INIT:    Need to be set when creating a new CBI from scratch. All fields
+ *          will be initialized to zero first.
+ */
+#define CBI_SET_NO_SYNC		BIT(0)
+#define CBI_SET_INIT		BIT(1)
+
+struct ec_params_set_cbi {
+	uint32_t tag;		/* enum cbi_data_tag */
+	uint32_t flag;		/* CBI_SET_* */
+	uint32_t size;		/* Data size */
+	uint8_t data[];		/* For string and raw data */
+} __ec_align1;
+
 /*****************************************************************************/
 /* Fingerprint MCU commands: range 0x0400-0x040x */
 
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 29/30] mfd: cros_ec: Add Management API entry points
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (27 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 28/30] mfd: cros_ec: Add SKU ID and Secure storage API Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-03 22:02 ` [PATCH v2 30/30] mfd: cros_ec: Update I2S API Gwendal Grignou
  2019-05-07  9:44 ` [PATCH v2 00/30] Update cros_ec_commands.h Lee Jones
  30 siblings, 0 replies; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Add commands for test and management.
Add command space for future development.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 113 +++++++++++++++++++++++++++
 1 file changed, 113 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 860a76274334..fc8babce1576 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -5176,6 +5176,119 @@ struct ec_params_set_cbi {
 	uint8_t data[];		/* For string and raw data */
 } __ec_align1;
 
+/*
+ * Information about resets of the AP by the EC and the EC's own uptime.
+ */
+#define EC_CMD_GET_UPTIME_INFO 0x0121
+
+struct ec_response_uptime_info {
+	/*
+	 * Number of milliseconds since the last EC boot. Sysjump resets
+	 * typically do not restart the EC's time_since_boot epoch.
+	 *
+	 * WARNING: The EC's sense of time is much less accurate than the AP's
+	 * sense of time, in both phase and frequency.  This timebase is similar
+	 * to CLOCK_MONOTONIC_RAW, but with 1% or more frequency error.
+	 */
+	uint32_t time_since_ec_boot_ms;
+
+	/*
+	 * Number of times the AP was reset by the EC since the last EC boot.
+	 * Note that the AP may be held in reset by the EC during the initial
+	 * boot sequence, such that the very first AP boot may count as more
+	 * than one here.
+	 */
+	uint32_t ap_resets_since_ec_boot;
+
+	/*
+	 * The set of flags which describe the EC's most recent reset.  See
+	 * include/system.h RESET_FLAG_* for details.
+	 */
+	uint32_t ec_reset_flags;
+
+	/* Empty log entries have both the cause and timestamp set to zero. */
+	struct ap_reset_log_entry {
+		/*
+		 * See include/chipset.h: enum chipset_{reset,shutdown}_reason
+		 * for details.
+		 */
+		uint16_t reset_cause;
+
+		/* Reserved for protocol growth. */
+		uint16_t reserved;
+
+		/*
+		 * The time of the reset's assertion, in milliseconds since the
+		 * last EC boot, in the same epoch as time_since_ec_boot_ms.
+		 * Set to zero if the log entry is empty.
+		 */
+		uint32_t reset_time_ms;
+	} recent_ap_reset[4];
+} __ec_align4;
+
+/*
+ * Add entropy to the device secret (stored in the rollback region).
+ *
+ * Depending on the chip, the operation may take a long time (e.g. to erase
+ * flash), so the commands are asynchronous.
+ */
+#define EC_CMD_ADD_ENTROPY	0x0122
+
+enum add_entropy_action {
+	/* Add entropy to the current secret. */
+	ADD_ENTROPY_ASYNC = 0,
+	/*
+	 * Add entropy, and also make sure that the previous secret is erased.
+	 * (this can be implemented by adding entropy multiple times until
+	 * all rolback blocks have been overwritten).
+	 */
+	ADD_ENTROPY_RESET_ASYNC = 1,
+	/* Read back result from the previous operation. */
+	ADD_ENTROPY_GET_RESULT = 2,
+};
+
+struct ec_params_rollback_add_entropy {
+	uint8_t action;
+} __ec_align1;
+
+/*
+ * Perform a single read of a given ADC channel.
+ */
+#define EC_CMD_ADC_READ		0x0123
+
+struct ec_params_adc_read {
+	uint8_t adc_channel;
+} __ec_align1;
+
+struct ec_response_adc_read {
+	int32_t adc_value;
+} __ec_align4;
+
+/*
+ * Read back rollback info
+ */
+#define EC_CMD_ROLLBACK_INFO		0x0124
+
+struct ec_response_rollback_info {
+	int32_t id; /* Incrementing number to indicate which region to use. */
+	int32_t rollback_min_version;
+	int32_t rw_rollback_version;
+} __ec_align4;
+
+
+/* Issue AP reset */
+#define EC_CMD_AP_RESET 0x0125
+
+/*****************************************************************************/
+/* The command range 0x200-0x2FF is reserved for Rotor. */
+
+/*****************************************************************************/
+/*
+ * Reserve a range of host commands for the CR51 firmware.
+ */
+#define EC_CMD_CR51_BASE 0x0300
+#define EC_CMD_CR51_LAST 0x03FF
+
 /*****************************************************************************/
 /* Fingerprint MCU commands: range 0x0400-0x040x */
 
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* [PATCH v2 30/30] mfd: cros_ec: Update I2S API
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (28 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 29/30] mfd: cros_ec: Add Management API entry points Gwendal Grignou
@ 2019-05-03 22:02 ` Gwendal Grignou
  2019-05-07  9:50   ` Cheng-yi Chiang
  2019-05-07  9:44 ` [PATCH v2 00/30] Update cros_ec_commands.h Lee Jones
  30 siblings, 1 reply; 37+ messages in thread
From: Gwendal Grignou @ 2019-05-03 22:02 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, Gwendal Grignou

Improve I2S API.
Rename ec_response_codec_gain into ec_codec_i2s_gain,
update caller accordlingly.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 44 +++++++++++++---------------
 sound/soc/codecs/cros_ec_codec.c     |  8 ++---
 2 files changed, 24 insertions(+), 28 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index fc8babce1576..fa397722f17e 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -4471,6 +4471,7 @@ enum mkbp_cec_event {
 /* Commands for I2S recording on audio codec. */
 
 #define EC_CMD_CODEC_I2S 0x00BC
+#define EC_WOV_I2S_SAMPLE_RATE 48000
 
 enum ec_codec_i2s_subcmd {
 	EC_CODEC_SET_SAMPLE_DEPTH = 0x0,
@@ -4480,6 +4481,7 @@ enum ec_codec_i2s_subcmd {
 	EC_CODEC_I2S_SET_CONFIG = 0x4,
 	EC_CODEC_I2S_SET_TDM_CONFIG = 0x5,
 	EC_CODEC_I2S_SET_BCLK = 0x6,
+	EC_CODEC_I2S_SUBCMD_COUNT = 0x7,
 };
 
 enum ec_sample_depth_value {
@@ -4496,6 +4498,21 @@ enum ec_i2s_config {
 	EC_DAI_FMT_PCM_TDM = 5,
 };
 
+/*
+ * For subcommand EC_CODEC_GET_GAIN.
+ */
+struct __ec_align1 ec_codec_i2s_gain {
+	uint8_t left;
+	uint8_t right;
+};
+
+struct __ec_todo_unpacked ec_param_codec_i2s_tdm {
+	int16_t ch0_delay; /* 0 to 496 */
+	int16_t ch1_delay; /* -1 to 496 */
+	uint8_t adjacent_to_ch0;
+	uint8_t adjacent_to_ch1;
+};
+
 struct __ec_todo_packed ec_param_codec_i2s {
 	/* enum ec_codec_i2s_subcmd */
 	uint8_t cmd;
@@ -4510,10 +4527,7 @@ struct __ec_todo_packed ec_param_codec_i2s {
 		 * EC_CODEC_SET_GAIN
 		 * Value should be 0~43 for both channels.
 		 */
-		struct __ec_align1 ec_param_codec_i2s_set_gain {
-			uint8_t left;
-			uint8_t right;
-		} gain;
+		struct ec_codec_i2s_gain gain;
 
 		/*
 		 * EC_CODEC_I2S_ENABLE
@@ -4522,7 +4536,7 @@ struct __ec_todo_packed ec_param_codec_i2s {
 		uint8_t i2s_enable;
 
 		/*
-		 * EC_CODEC_I2S_SET_COFNIG
+		 * EC_CODEC_I2S_SET_CONFIG
 		 * Value should be one of ec_i2s_config.
 		 */
 		uint8_t i2s_config;
@@ -4531,18 +4545,7 @@ struct __ec_todo_packed ec_param_codec_i2s {
 		 * EC_CODEC_I2S_SET_TDM_CONFIG
 		 * Value should be one of ec_i2s_config.
 		 */
-		struct __ec_todo_unpacked ec_param_codec_i2s_tdm {
-			/*
-			 * 0 to 496
-			 */
-			int16_t ch0_delay;
-			/*
-			 * -1 to 496
-			 */
-			int16_t ch1_delay;
-			uint8_t adjacent_to_ch0;
-			uint8_t adjacent_to_ch1;
-		} tdm_param;
+		struct ec_param_codec_i2s_tdm tdm_param;
 
 		/*
 		 * EC_CODEC_I2S_SET_BCLK
@@ -4551,13 +4554,6 @@ struct __ec_todo_packed ec_param_codec_i2s {
 	};
 };
 
-/*
- * For subcommand EC_CODEC_GET_GAIN.
- */
-struct ec_response_codec_gain {
-	uint8_t left;
-	uint8_t right;
-} __ec_align1;
 
 /*****************************************************************************/
 /* System commands */
diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c
index 99a3af8a15ff..87830ed5ebf4 100644
--- a/sound/soc/codecs/cros_ec_codec.c
+++ b/sound/soc/codecs/cros_ec_codec.c
@@ -38,21 +38,21 @@ static const DECLARE_TLV_DB_SCALE(ec_mic_gain_tlv, 0, 100, 0);
 
 static int ec_command_get_gain(struct snd_soc_component *component,
 			       struct ec_param_codec_i2s *param,
-			       struct ec_response_codec_gain *resp)
+			       struct ec_codec_i2s_gain *resp)
 {
 	struct cros_ec_codec_data *codec_data =
 		snd_soc_component_get_drvdata(component);
 	struct cros_ec_device *ec_device = codec_data->ec_device;
 	u8 buffer[sizeof(struct cros_ec_command) +
 		  max(sizeof(struct ec_param_codec_i2s),
-		      sizeof(struct ec_response_codec_gain))];
+		      sizeof(struct ec_codec_i2s_gain))];
 	struct cros_ec_command *msg = (struct cros_ec_command *)&buffer;
 	int ret;
 
 	msg->version = 0;
 	msg->command = EC_CMD_CODEC_I2S;
 	msg->outsize = sizeof(struct ec_param_codec_i2s);
-	msg->insize = sizeof(struct ec_response_codec_gain);
+	msg->insize = sizeof(struct ec_codec_i2s_gain);
 
 	memcpy(msg->data, param, msg->outsize);
 
@@ -226,7 +226,7 @@ static int get_ec_mic_gain(struct snd_soc_component *component,
 			   u8 *left, u8 *right)
 {
 	struct ec_param_codec_i2s param;
-	struct ec_response_codec_gain resp;
+	struct ec_codec_i2s_gain resp;
 	int ret;
 
 	param.cmd = EC_CODEC_GET_GAIN;
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 37+ messages in thread

* Re: [PATCH v2 01/30] mfd: cros_ec: Update license term
  2019-05-03 22:02 ` [PATCH v2 01/30] mfd: cros_ec: Update license term Gwendal Grignou
@ 2019-05-05 15:46   ` Jonathan Cameron
  0 siblings, 0 replies; 37+ messages in thread
From: Jonathan Cameron @ 2019-05-05 15:46 UTC (permalink / raw)
  To: Gwendal Grignou
  Cc: enric.balletbo, bleung, groeck, lee.jones, broonie, cychiang,
	tiwai, linux-iio, alsa-devel

On Fri,  3 May 2019 15:02:04 -0700
Gwendal Grignou <gwendal@chromium.org> wrote:

> Update to SPDX-License-Identifier, GPL-2.0
> 
> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Nitpick. There are a few other trivial changes in here, that the description
should probably mention.  I doubt anyone really cares though given
how trivial the other comment changes are.

Jonathan

> ---
>  include/linux/mfd/cros_ec_commands.h | 20 +++++---------------
>  1 file changed, 5 insertions(+), 15 deletions(-)
> 
> diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
> index 43bee4f7d137..6fa508643da3 100644
> --- a/include/linux/mfd/cros_ec_commands.h
> +++ b/include/linux/mfd/cros_ec_commands.h
> @@ -1,25 +1,15 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
>  /*
>   * Host communication command constants for ChromeOS EC
>   *
>   * Copyright (C) 2012 Google, Inc
>   *
> - * This software is licensed under the terms of the GNU General Public
> - * License version 2, as published by the Free Software Foundation, and
> - * may be copied, distributed, and modified under those terms.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> - * GNU General Public License for more details.
> - *
> - * The ChromeOS EC multi function device is used to mux all the requests
> - * to the EC device for its multiple features: keyboard controller,
> - * battery charging and regulator control, firmware update.
> - *
> - * NOTE: This file is copied verbatim from the ChromeOS EC Open Source
> - * project in an attempt to make future updates easy to make.
> + * NOTE: This file is auto-generated from ChromeOS EC Open Source code from
> + * https://chromium.googlesource.com/chromiumos/platform/ec/+/master/include/ec_commands.h
>   */
>  
> +/* Host communication command constants for Chrome EC */
> +
>  #ifndef __CROS_EC_COMMANDS_H
>  #define __CROS_EC_COMMANDS_H
>  


^ permalink raw reply	[flat|nested] 37+ messages in thread

* Re: [PATCH v2 00/30] Update cros_ec_commands.h
  2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (29 preceding siblings ...)
  2019-05-03 22:02 ` [PATCH v2 30/30] mfd: cros_ec: Update I2S API Gwendal Grignou
@ 2019-05-07  9:44 ` Lee Jones
  2019-05-08 23:19   ` Benson Leung
  30 siblings, 1 reply; 37+ messages in thread
From: Lee Jones @ 2019-05-07  9:44 UTC (permalink / raw)
  To: Gwendal Grignou
  Cc: enric.balletbo, bleung, groeck, jic23, broonie, cychiang, tiwai,
	linux-iio, alsa-devel

On Fri, 03 May 2019, Gwendal Grignou wrote:

> The interface between CrosEC embedded controller and the host,
> described by cros_ec_commands.h, as diverged from what the embedded
> controller really support.
> 
> The source of thruth is at
> https://chromium.googlesource.com/chromiumos/platform/ec/+/master/include/ec_commands.h
> 
> That include file is converted to remove ACPI and Embedded only code.
> 
> From now on, cros_ec_commands.h will be automatically generated from
> the file above, do not modify directly.
> 
> Fell free to squash the commits below.
> 
> Changes in v2:
> - Move I2S changes at the end of the patchset, squashed with change in
>   sound/soc/codecs/cros_ec_codec.c to match new interface.
> - Add Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> 
> Gwendal Grignou (30):
>   mfd: cros_ec: Update license term
>   mfd: cros_ec: Zero BUILD_ macro
>   mfd: cros_ec: set comments properly
>   mfd: cros_ec: add ec_align macros
>   mfd: cros_ec: Define commands as 4-digit UPPER CASE hex values
>   mfd: cros_ec: use BIT macro
>   mfd: cros_ec: Update ACPI interface definition
>   mfd: cros_ec: move HDMI CEC API definition
>   mfd: cros_ec: Remove zero-size structs
>   mfd: cros_ec: Add Flash V2 commands API
>   mfd: cros_ec: Add PWM_SET_DUTY API
>   mfd: cros_ec: Add lightbar v2 API
>   mfd: cros_ec: Expand hash API
>   mfd: cros_ec: Add EC transport protocol v4
>   mfd: cros_ec: Complete MEMS sensor API
>   mfd: cros_ec: Fix event processing API
>   mfd: cros_ec: Add fingerprint API
>   mfd: cros_ec: Fix temperature API
>   mfd: cros_ec: Complete Power and USB PD API
>   mfd: cros_ec: Add API for keyboard testing
>   mfd: cros_ec: Add Hibernate API
>   mfd: cros_ec: Add Smart Battery Firmware update API
>   mfd: cros_ec: Add I2C passthru protection API
>   mfd: cros_ec: Add API for EC-EC communication
>   mfd: cros_ec: Add API for Touchpad support
>   mfd: cros_ec: Add API for Fingerprint support
>   mfd: cros_ec: Add API for rwsig
>   mfd: cros_ec: Add SKU ID and Secure storage API
>   mfd: cros_ec: Add Management API entry points
>   mfd: cros_ec: Update I2S API
> 
>  include/linux/mfd/cros_ec_commands.h | 3735 +++++++++++++++++++++-----
>  sound/soc/codecs/cros_ec_codec.c     |    8 +-
>  2 files changed, 2997 insertions(+), 746 deletions(-)

Again, it would be good to get 1 or 2 more Chromium Acks, given the
extent of the changes.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

^ permalink raw reply	[flat|nested] 37+ messages in thread

* Re: [PATCH v2 30/30] mfd: cros_ec: Update I2S API
  2019-05-03 22:02 ` [PATCH v2 30/30] mfd: cros_ec: Update I2S API Gwendal Grignou
@ 2019-05-07  9:50   ` Cheng-yi Chiang
  0 siblings, 0 replies; 37+ messages in thread
From: Cheng-yi Chiang @ 2019-05-07  9:50 UTC (permalink / raw)
  To: Gwendal Grignou
  Cc: Enric Balletbo i Serra, Benson Leung, Guenter Roeck, Lee Jones,
	jic23, Mark Brown, Takashi Iwai, linux-iio,
	moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM...

Hi Gwendal,
Thanks for the fix!


From: Gwendal Grignou <gwendal@chromium.org>
Date: Sat, May 4, 2019 at 6:03 AM
To: <enric.balletbo@collabora.com>, <bleung@chromium.org>,
<groeck@chromium.org>, <lee.jones@linaro.org>, <jic23@kernel.org>,
<broonie@kernel.org>, <cychiang@chromium.org>, <tiwai@suse.com>
Cc: <linux-iio@vger.kernel.org>, <alsa-devel@alsa-project.org>, Gwendal Grignou

> Improve I2S API.
> Rename ec_response_codec_gain into ec_codec_i2s_gain,
> update caller accordlingly.
>
> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
> ---
>  include/linux/mfd/cros_ec_commands.h | 44 +++++++++++++---------------
>  sound/soc/codecs/cros_ec_codec.c     |  8 ++---
>  2 files changed, 24 insertions(+), 28 deletions(-)
>
> diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
> index fc8babce1576..fa397722f17e 100644
> --- a/include/linux/mfd/cros_ec_commands.h
> +++ b/include/linux/mfd/cros_ec_commands.h
> @@ -4471,6 +4471,7 @@ enum mkbp_cec_event {
>  /* Commands for I2S recording on audio codec. */
>
>  #define EC_CMD_CODEC_I2S 0x00BC
> +#define EC_WOV_I2S_SAMPLE_RATE 48000
>
>  enum ec_codec_i2s_subcmd {
>         EC_CODEC_SET_SAMPLE_DEPTH = 0x0,
> @@ -4480,6 +4481,7 @@ enum ec_codec_i2s_subcmd {
>         EC_CODEC_I2S_SET_CONFIG = 0x4,
>         EC_CODEC_I2S_SET_TDM_CONFIG = 0x5,
>         EC_CODEC_I2S_SET_BCLK = 0x6,
> +       EC_CODEC_I2S_SUBCMD_COUNT = 0x7,
>  };
>
>  enum ec_sample_depth_value {
> @@ -4496,6 +4498,21 @@ enum ec_i2s_config {
>         EC_DAI_FMT_PCM_TDM = 5,
>  };
>
> +/*
> + * For subcommand EC_CODEC_GET_GAIN.
> + */
> +struct __ec_align1 ec_codec_i2s_gain {
> +       uint8_t left;
> +       uint8_t right;
> +};
> +
> +struct __ec_todo_unpacked ec_param_codec_i2s_tdm {
> +       int16_t ch0_delay; /* 0 to 496 */
> +       int16_t ch1_delay; /* -1 to 496 */
> +       uint8_t adjacent_to_ch0;
> +       uint8_t adjacent_to_ch1;
> +};
> +
>  struct __ec_todo_packed ec_param_codec_i2s {
>         /* enum ec_codec_i2s_subcmd */
>         uint8_t cmd;
> @@ -4510,10 +4527,7 @@ struct __ec_todo_packed ec_param_codec_i2s {
>                  * EC_CODEC_SET_GAIN
>                  * Value should be 0~43 for both channels.
>                  */
> -               struct __ec_align1 ec_param_codec_i2s_set_gain {
> -                       uint8_t left;
> -                       uint8_t right;
> -               } gain;
> +               struct ec_codec_i2s_gain gain;
>
>                 /*
>                  * EC_CODEC_I2S_ENABLE
> @@ -4522,7 +4536,7 @@ struct __ec_todo_packed ec_param_codec_i2s {
>                 uint8_t i2s_enable;
>
>                 /*
> -                * EC_CODEC_I2S_SET_COFNIG
> +                * EC_CODEC_I2S_SET_CONFIG
>                  * Value should be one of ec_i2s_config.
>                  */
>                 uint8_t i2s_config;
> @@ -4531,18 +4545,7 @@ struct __ec_todo_packed ec_param_codec_i2s {
>                  * EC_CODEC_I2S_SET_TDM_CONFIG
>                  * Value should be one of ec_i2s_config.
>                  */
> -               struct __ec_todo_unpacked ec_param_codec_i2s_tdm {
> -                       /*
> -                        * 0 to 496
> -                        */
> -                       int16_t ch0_delay;
> -                       /*
> -                        * -1 to 496
> -                        */
> -                       int16_t ch1_delay;
> -                       uint8_t adjacent_to_ch0;
> -                       uint8_t adjacent_to_ch1;
> -               } tdm_param;
> +               struct ec_param_codec_i2s_tdm tdm_param;
>
>                 /*
>                  * EC_CODEC_I2S_SET_BCLK
> @@ -4551,13 +4554,6 @@ struct __ec_todo_packed ec_param_codec_i2s {
>         };
>  };
>
> -/*
> - * For subcommand EC_CODEC_GET_GAIN.
> - */
> -struct ec_response_codec_gain {
> -       uint8_t left;
> -       uint8_t right;
> -} __ec_align1;
>
>  /*****************************************************************************/
>  /* System commands */
> diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c
> index 99a3af8a15ff..87830ed5ebf4 100644
> --- a/sound/soc/codecs/cros_ec_codec.c
> +++ b/sound/soc/codecs/cros_ec_codec.c
> @@ -38,21 +38,21 @@ static const DECLARE_TLV_DB_SCALE(ec_mic_gain_tlv, 0, 100, 0);
>
>  static int ec_command_get_gain(struct snd_soc_component *component,
>                                struct ec_param_codec_i2s *param,
> -                              struct ec_response_codec_gain *resp)
> +                              struct ec_codec_i2s_gain *resp)
>  {
>         struct cros_ec_codec_data *codec_data =
>                 snd_soc_component_get_drvdata(component);
>         struct cros_ec_device *ec_device = codec_data->ec_device;
>         u8 buffer[sizeof(struct cros_ec_command) +
>                   max(sizeof(struct ec_param_codec_i2s),
> -                     sizeof(struct ec_response_codec_gain))];
> +                     sizeof(struct ec_codec_i2s_gain))];
>         struct cros_ec_command *msg = (struct cros_ec_command *)&buffer;
>         int ret;
>
>         msg->version = 0;
>         msg->command = EC_CMD_CODEC_I2S;
>         msg->outsize = sizeof(struct ec_param_codec_i2s);
> -       msg->insize = sizeof(struct ec_response_codec_gain);
> +       msg->insize = sizeof(struct ec_codec_i2s_gain);
>
>         memcpy(msg->data, param, msg->outsize);
>
> @@ -226,7 +226,7 @@ static int get_ec_mic_gain(struct snd_soc_component *component,
>                            u8 *left, u8 *right)
>  {
>         struct ec_param_codec_i2s param;
> -       struct ec_response_codec_gain resp;
> +       struct ec_codec_i2s_gain resp;
>         int ret;
>
>         param.cmd = EC_CODEC_GET_GAIN;
> --
> 2.21.0.1020.gf2820cf01a-goog
>
Acked-by: Cheng-Yi Chiang <cychiang@chromium.org>

^ permalink raw reply	[flat|nested] 37+ messages in thread

* Re: [PATCH v2 00/30] Update cros_ec_commands.h
  2019-05-07  9:44 ` [PATCH v2 00/30] Update cros_ec_commands.h Lee Jones
@ 2019-05-08 23:19   ` Benson Leung
  2019-05-09  6:11     ` Lee Jones
  0 siblings, 1 reply; 37+ messages in thread
From: Benson Leung @ 2019-05-08 23:19 UTC (permalink / raw)
  To: Lee Jones
  Cc: Gwendal Grignou, enric.balletbo, bleung, groeck, jic23, broonie,
	cychiang, tiwai, linux-iio, alsa-devel

[-- Attachment #1: Type: text/plain, Size: 2968 bytes --]

Hi Gwendal, Hi Lee,

On Tue, May 07, 2019 at 10:44:46AM +0100, Lee Jones wrote:
> On Fri, 03 May 2019, Gwendal Grignou wrote:
> 
> > The interface between CrosEC embedded controller and the host,
> > described by cros_ec_commands.h, as diverged from what the embedded
> > controller really support.
> > 
> > The source of thruth is at
> > https://chromium.googlesource.com/chromiumos/platform/ec/+/master/include/ec_commands.h
> > 
> > That include file is converted to remove ACPI and Embedded only code.
> > 
> > From now on, cros_ec_commands.h will be automatically generated from
> > the file above, do not modify directly.
> > 
> > Fell free to squash the commits below.
> > 
> > Changes in v2:
> > - Move I2S changes at the end of the patchset, squashed with change in
> >   sound/soc/codecs/cros_ec_codec.c to match new interface.
> > - Add Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> > 
> > Gwendal Grignou (30):
> >   mfd: cros_ec: Update license term
> >   mfd: cros_ec: Zero BUILD_ macro
> >   mfd: cros_ec: set comments properly
> >   mfd: cros_ec: add ec_align macros
> >   mfd: cros_ec: Define commands as 4-digit UPPER CASE hex values
> >   mfd: cros_ec: use BIT macro
> >   mfd: cros_ec: Update ACPI interface definition
> >   mfd: cros_ec: move HDMI CEC API definition
> >   mfd: cros_ec: Remove zero-size structs
> >   mfd: cros_ec: Add Flash V2 commands API
> >   mfd: cros_ec: Add PWM_SET_DUTY API
> >   mfd: cros_ec: Add lightbar v2 API
> >   mfd: cros_ec: Expand hash API
> >   mfd: cros_ec: Add EC transport protocol v4
> >   mfd: cros_ec: Complete MEMS sensor API
> >   mfd: cros_ec: Fix event processing API
> >   mfd: cros_ec: Add fingerprint API
> >   mfd: cros_ec: Fix temperature API
> >   mfd: cros_ec: Complete Power and USB PD API
> >   mfd: cros_ec: Add API for keyboard testing
> >   mfd: cros_ec: Add Hibernate API
> >   mfd: cros_ec: Add Smart Battery Firmware update API
> >   mfd: cros_ec: Add I2C passthru protection API
> >   mfd: cros_ec: Add API for EC-EC communication
> >   mfd: cros_ec: Add API for Touchpad support
> >   mfd: cros_ec: Add API for Fingerprint support
> >   mfd: cros_ec: Add API for rwsig
> >   mfd: cros_ec: Add SKU ID and Secure storage API
> >   mfd: cros_ec: Add Management API entry points
> >   mfd: cros_ec: Update I2S API
> > 
> >  include/linux/mfd/cros_ec_commands.h | 3735 +++++++++++++++++++++-----
> >  sound/soc/codecs/cros_ec_codec.c     |    8 +-
> >  2 files changed, 2997 insertions(+), 746 deletions(-)
> 
> Again, it would be good to get 1 or 2 more Chromium Acks, given the
> extent of the changes.

I've gone ahead and looked through all 30 of the changes here. It looks good to me.

Acked-By: Benson Leung <bleung@chromium.org>

Thanks Gwendal.

Benson

-- 
Benson Leung
Staff Software Engineer
Chrome OS Kernel
Google Inc.
bleung@google.com
Chromium OS Project
bleung@chromium.org

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 37+ messages in thread

* Re: [PATCH v2 24/30] mfd: cros_ec: Add API for EC-EC communication
  2019-05-03 22:02 ` [PATCH v2 24/30] mfd: cros_ec: Add API for EC-EC communication Gwendal Grignou
@ 2019-05-08 23:22   ` Benson Leung
  0 siblings, 0 replies; 37+ messages in thread
From: Benson Leung @ 2019-05-08 23:22 UTC (permalink / raw)
  To: Gwendal Grignou
  Cc: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai, linux-iio, alsa-devel

[-- Attachment #1: Type: text/plain, Size: 4502 bytes --]

Hi Gwendal,

Really tiny commit message nit, otherwise look good.

On Fri, May 03, 2019 at 03:02:27PM -0700, Gwendal Grignou wrote:
> Allow EC to talk to other ECs that are not presented to the host.
> Neeed when EC are present in detachable keyboard.

s/Neeed/Needed


Thanks,
Benson
> 
> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
> ---
>  include/linux/mfd/cros_ec_commands.h | 95 ++++++++++++++++++++++++++++
>  1 file changed, 95 insertions(+)
> 
> diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
> index 59ad6bae3f9b..52fd9bfafc7f 100644
> --- a/include/linux/mfd/cros_ec_commands.h
> +++ b/include/linux/mfd/cros_ec_commands.h
> @@ -5043,6 +5043,101 @@ struct ec_response_pd_chip_info_v1 {
>  	};
>  } __ec_align2;
>  
> +/*****************************************************************************/
> +/* EC-EC communication commands: range 0x0600-0x06FF */
> +
> +#define EC_COMM_TEXT_MAX 8
> +
> +/*
> + * Get battery static information, i.e. information that never changes, or
> + * very infrequently.
> + */
> +#define EC_CMD_BATTERY_GET_STATIC 0x0600
> +
> +/**
> + * struct ec_params_battery_static_info - Battery static info parameters
> + * @index: Battery index.
> + */
> +struct ec_params_battery_static_info {
> +	uint8_t index;
> +} __ec_align_size1;
> +
> +/**
> + * struct ec_response_battery_static_info - Battery static info response
> + * @design_capacity: Battery Design Capacity (mAh)
> + * @design_voltage: Battery Design Voltage (mV)
> + * @manufacturer: Battery Manufacturer String
> + * @model: Battery Model Number String
> + * @serial: Battery Serial Number String
> + * @type: Battery Type String
> + * @cycle_count: Battery Cycle Count
> + */
> +struct ec_response_battery_static_info {
> +	uint16_t design_capacity;
> +	uint16_t design_voltage;
> +	char manufacturer[EC_COMM_TEXT_MAX];
> +	char model[EC_COMM_TEXT_MAX];
> +	char serial[EC_COMM_TEXT_MAX];
> +	char type[EC_COMM_TEXT_MAX];
> +	/* TODO(crbug.com/795991): Consider moving to dynamic structure. */
> +	uint32_t cycle_count;
> +} __ec_align4;
> +
> +/*
> + * Get battery dynamic information, i.e. information that is likely to change
> + * every time it is read.
> + */
> +#define EC_CMD_BATTERY_GET_DYNAMIC 0x0601
> +
> +/**
> + * struct ec_params_battery_dynamic_info - Battery dynamic info parameters
> + * @index: Battery index.
> + */
> +struct ec_params_battery_dynamic_info {
> +	uint8_t index;
> +} __ec_align_size1;
> +
> +/**
> + * struct ec_response_battery_dynamic_info - Battery dynamic info response
> + * @actual_voltage: Battery voltage (mV)
> + * @actual_current: Battery current (mA); negative=discharging
> + * @remaining_capacity: Remaining capacity (mAh)
> + * @full_capacity: Capacity (mAh, might change occasionally)
> + * @flags: Flags, see EC_BATT_FLAG_*
> + * @desired_voltage: Charging voltage desired by battery (mV)
> + * @desired_current: Charging current desired by battery (mA)
> + */
> +struct ec_response_battery_dynamic_info {
> +	int16_t actual_voltage;
> +	int16_t actual_current;
> +	int16_t remaining_capacity;
> +	int16_t full_capacity;
> +	int16_t flags;
> +	int16_t desired_voltage;
> +	int16_t desired_current;
> +} __ec_align2;
> +
> +/*
> + * Control charger chip. Used to control charger chip on the slave.
> + */
> +#define EC_CMD_CHARGER_CONTROL 0x0602
> +
> +/**
> + * struct ec_params_charger_control - Charger control parameters
> + * @max_current: Charger current (mA). Positive to allow base to draw up to
> + *     max_current and (possibly) charge battery, negative to request current
> + *     from base (OTG).
> + * @otg_voltage: Voltage (mV) to use in OTG mode, ignored if max_current is
> + *     >= 0.
> + * @allow_charging: Allow base battery charging (only makes sense if
> + *     max_current > 0).
> + */
> +struct ec_params_charger_control {
> +	int16_t max_current;
> +	uint16_t otg_voltage;
> +	uint8_t allow_charging;
> +} __ec_align_size1;
> +
>  /*****************************************************************************/
>  /*
>   * Reserve a range of host commands for board-specific, experimental, or
> -- 
> 2.21.0.1020.gf2820cf01a-goog
> 

-- 
Benson Leung
Staff Software Engineer
Chrome OS Kernel
Google Inc.
bleung@google.com
Chromium OS Project
bleung@chromium.org

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 37+ messages in thread

* Re: [PATCH v2 00/30] Update cros_ec_commands.h
  2019-05-08 23:19   ` Benson Leung
@ 2019-05-09  6:11     ` Lee Jones
  0 siblings, 0 replies; 37+ messages in thread
From: Lee Jones @ 2019-05-09  6:11 UTC (permalink / raw)
  To: Benson Leung
  Cc: Gwendal Grignou, enric.balletbo, bleung, groeck, jic23, broonie,
	cychiang, tiwai, linux-iio, alsa-devel

On Wed, 08 May 2019, Benson Leung wrote:

> Hi Gwendal, Hi Lee,
> 
> On Tue, May 07, 2019 at 10:44:46AM +0100, Lee Jones wrote:
> > On Fri, 03 May 2019, Gwendal Grignou wrote:
> > 
> > > The interface between CrosEC embedded controller and the host,
> > > described by cros_ec_commands.h, as diverged from what the embedded
> > > controller really support.
> > > 
> > > The source of thruth is at
> > > https://chromium.googlesource.com/chromiumos/platform/ec/+/master/include/ec_commands.h
> > > 
> > > That include file is converted to remove ACPI and Embedded only code.
> > > 
> > > From now on, cros_ec_commands.h will be automatically generated from
> > > the file above, do not modify directly.
> > > 
> > > Fell free to squash the commits below.
> > > 
> > > Changes in v2:
> > > - Move I2S changes at the end of the patchset, squashed with change in
> > >   sound/soc/codecs/cros_ec_codec.c to match new interface.
> > > - Add Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> > > 
> > > Gwendal Grignou (30):
> > >   mfd: cros_ec: Update license term
> > >   mfd: cros_ec: Zero BUILD_ macro
> > >   mfd: cros_ec: set comments properly
> > >   mfd: cros_ec: add ec_align macros
> > >   mfd: cros_ec: Define commands as 4-digit UPPER CASE hex values
> > >   mfd: cros_ec: use BIT macro
> > >   mfd: cros_ec: Update ACPI interface definition
> > >   mfd: cros_ec: move HDMI CEC API definition
> > >   mfd: cros_ec: Remove zero-size structs
> > >   mfd: cros_ec: Add Flash V2 commands API
> > >   mfd: cros_ec: Add PWM_SET_DUTY API
> > >   mfd: cros_ec: Add lightbar v2 API
> > >   mfd: cros_ec: Expand hash API
> > >   mfd: cros_ec: Add EC transport protocol v4
> > >   mfd: cros_ec: Complete MEMS sensor API
> > >   mfd: cros_ec: Fix event processing API
> > >   mfd: cros_ec: Add fingerprint API
> > >   mfd: cros_ec: Fix temperature API
> > >   mfd: cros_ec: Complete Power and USB PD API
> > >   mfd: cros_ec: Add API for keyboard testing
> > >   mfd: cros_ec: Add Hibernate API
> > >   mfd: cros_ec: Add Smart Battery Firmware update API
> > >   mfd: cros_ec: Add I2C passthru protection API
> > >   mfd: cros_ec: Add API for EC-EC communication
> > >   mfd: cros_ec: Add API for Touchpad support
> > >   mfd: cros_ec: Add API for Fingerprint support
> > >   mfd: cros_ec: Add API for rwsig
> > >   mfd: cros_ec: Add SKU ID and Secure storage API
> > >   mfd: cros_ec: Add Management API entry points
> > >   mfd: cros_ec: Update I2S API
> > > 
> > >  include/linux/mfd/cros_ec_commands.h | 3735 +++++++++++++++++++++-----
> > >  sound/soc/codecs/cros_ec_codec.c     |    8 +-
> > >  2 files changed, 2997 insertions(+), 746 deletions(-)
> > 
> > Again, it would be good to get 1 or 2 more Chromium Acks, given the
> > extent of the changes.
> 
> I've gone ahead and looked through all 30 of the changes here. It looks good to me.
> 
> Acked-By: Benson Leung <bleung@chromium.org>

Thanks for taking he time.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

^ permalink raw reply	[flat|nested] 37+ messages in thread

end of thread, other threads:[~2019-05-09  6:11 UTC | newest]

Thread overview: 37+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 01/30] mfd: cros_ec: Update license term Gwendal Grignou
2019-05-05 15:46   ` Jonathan Cameron
2019-05-03 22:02 ` [PATCH v2 02/30] mfd: cros_ec: Zero BUILD_ macro Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 03/30] mfd: cros_ec: set comments properly Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 04/30] mfd: cros_ec: add ec_align macros Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 05/30] mfd: cros_ec: Define commands as 4-digit UPPER CASE hex values Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 06/30] mfd: cros_ec: use BIT macro Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 07/30] mfd: cros_ec: Update ACPI interface definition Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 08/30] mfd: cros_ec: move HDMI CEC API definition Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 09/30] mfd: cros_ec: Remove zero-size structs Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 10/30] mfd: cros_ec: Add Flash V2 commands API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 11/30] mfd: cros_ec: Add PWM_SET_DUTY API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 12/30] mfd: cros_ec: Add lightbar v2 API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 13/30] mfd: cros_ec: Expand hash API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 14/30] mfd: cros_ec: Add EC transport protocol v4 Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 15/30] mfd: cros_ec: Complete MEMS sensor API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 16/30] mfd: cros_ec: Fix event processing API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 17/30] mfd: cros_ec: Add fingerprint API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 18/30] mfd: cros_ec: Fix temperature API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 19/30] mfd: cros_ec: Complete Power and USB PD API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 20/30] mfd: cros_ec: Add API for keyboard testing Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 21/30] mfd: cros_ec: Add Hibernate API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 22/30] mfd: cros_ec: Add Smart Battery Firmware update API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 23/30] mfd: cros_ec: Add I2C passthru protection API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 24/30] mfd: cros_ec: Add API for EC-EC communication Gwendal Grignou
2019-05-08 23:22   ` Benson Leung
2019-05-03 22:02 ` [PATCH v2 25/30] mfd: cros_ec: Add API for Touchpad support Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 26/30] mfd: cros_ec: Add API for Fingerprint support Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 27/30] mfd: cros_ec: Add API for rwsig Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 28/30] mfd: cros_ec: Add SKU ID and Secure storage API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 29/30] mfd: cros_ec: Add Management API entry points Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 30/30] mfd: cros_ec: Update I2S API Gwendal Grignou
2019-05-07  9:50   ` Cheng-yi Chiang
2019-05-07  9:44 ` [PATCH v2 00/30] Update cros_ec_commands.h Lee Jones
2019-05-08 23:19   ` Benson Leung
2019-05-09  6:11     ` Lee Jones

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).