Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
From: Gwendal Grignou <gwendal@chromium.org>
To: enric.balletbo@collabora.com, bleung@chromium.org,
	groeck@chromium.org, lee.jones@linaro.org, jic23@kernel.org,
	broonie@kernel.org, cychiang@chromium.org, tiwai@suse.com
Cc: linux-iio@vger.kernel.org, alsa-devel@alsa-project.org,
	linux-kernel@vger.kernel.org,
	Gwendal Grignou <gwendal@chromium.org>
Subject: [PATCH v3 29/30] mfd: cros_ec: Add Management API entry points
Date: Thu,  9 May 2019 14:13:52 -0700
Message-ID: <20190509211353.213194-30-gwendal@chromium.org> (raw)
In-Reply-To: <20190509211353.213194-1-gwendal@chromium.org>

Add commands for test and management.
Add command space for future development.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 113 +++++++++++++++++++++++++++
 1 file changed, 113 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 860a76274334..fc8babce1576 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -5176,6 +5176,119 @@ struct ec_params_set_cbi {
 	uint8_t data[];		/* For string and raw data */
 } __ec_align1;
 
+/*
+ * Information about resets of the AP by the EC and the EC's own uptime.
+ */
+#define EC_CMD_GET_UPTIME_INFO 0x0121
+
+struct ec_response_uptime_info {
+	/*
+	 * Number of milliseconds since the last EC boot. Sysjump resets
+	 * typically do not restart the EC's time_since_boot epoch.
+	 *
+	 * WARNING: The EC's sense of time is much less accurate than the AP's
+	 * sense of time, in both phase and frequency.  This timebase is similar
+	 * to CLOCK_MONOTONIC_RAW, but with 1% or more frequency error.
+	 */
+	uint32_t time_since_ec_boot_ms;
+
+	/*
+	 * Number of times the AP was reset by the EC since the last EC boot.
+	 * Note that the AP may be held in reset by the EC during the initial
+	 * boot sequence, such that the very first AP boot may count as more
+	 * than one here.
+	 */
+	uint32_t ap_resets_since_ec_boot;
+
+	/*
+	 * The set of flags which describe the EC's most recent reset.  See
+	 * include/system.h RESET_FLAG_* for details.
+	 */
+	uint32_t ec_reset_flags;
+
+	/* Empty log entries have both the cause and timestamp set to zero. */
+	struct ap_reset_log_entry {
+		/*
+		 * See include/chipset.h: enum chipset_{reset,shutdown}_reason
+		 * for details.
+		 */
+		uint16_t reset_cause;
+
+		/* Reserved for protocol growth. */
+		uint16_t reserved;
+
+		/*
+		 * The time of the reset's assertion, in milliseconds since the
+		 * last EC boot, in the same epoch as time_since_ec_boot_ms.
+		 * Set to zero if the log entry is empty.
+		 */
+		uint32_t reset_time_ms;
+	} recent_ap_reset[4];
+} __ec_align4;
+
+/*
+ * Add entropy to the device secret (stored in the rollback region).
+ *
+ * Depending on the chip, the operation may take a long time (e.g. to erase
+ * flash), so the commands are asynchronous.
+ */
+#define EC_CMD_ADD_ENTROPY	0x0122
+
+enum add_entropy_action {
+	/* Add entropy to the current secret. */
+	ADD_ENTROPY_ASYNC = 0,
+	/*
+	 * Add entropy, and also make sure that the previous secret is erased.
+	 * (this can be implemented by adding entropy multiple times until
+	 * all rolback blocks have been overwritten).
+	 */
+	ADD_ENTROPY_RESET_ASYNC = 1,
+	/* Read back result from the previous operation. */
+	ADD_ENTROPY_GET_RESULT = 2,
+};
+
+struct ec_params_rollback_add_entropy {
+	uint8_t action;
+} __ec_align1;
+
+/*
+ * Perform a single read of a given ADC channel.
+ */
+#define EC_CMD_ADC_READ		0x0123
+
+struct ec_params_adc_read {
+	uint8_t adc_channel;
+} __ec_align1;
+
+struct ec_response_adc_read {
+	int32_t adc_value;
+} __ec_align4;
+
+/*
+ * Read back rollback info
+ */
+#define EC_CMD_ROLLBACK_INFO		0x0124
+
+struct ec_response_rollback_info {
+	int32_t id; /* Incrementing number to indicate which region to use. */
+	int32_t rollback_min_version;
+	int32_t rw_rollback_version;
+} __ec_align4;
+
+
+/* Issue AP reset */
+#define EC_CMD_AP_RESET 0x0125
+
+/*****************************************************************************/
+/* The command range 0x200-0x2FF is reserved for Rotor. */
+
+/*****************************************************************************/
+/*
+ * Reserve a range of host commands for the CR51 firmware.
+ */
+#define EC_CMD_CR51_BASE 0x0300
+#define EC_CMD_CR51_LAST 0x03FF
+
 /*****************************************************************************/
 /* Fingerprint MCU commands: range 0x0400-0x040x */
 
-- 
2.21.0.1020.gf2820cf01a-goog


  parent reply index

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 01/30] mfd: cros_ec: Update license term Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 02/30] mfd: cros_ec: Zero BUILD_ macro Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 03/30] mfd: cros_ec: set comments properly Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 04/30] mfd: cros_ec: add ec_align macros Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 05/30] mfd: cros_ec: Define commands as 4-digit UPPER CASE hex values Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 06/30] mfd: cros_ec: use BIT macro Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 07/30] mfd: cros_ec: Update ACPI interface definition Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 08/30] mfd: cros_ec: move HDMI CEC API definition Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 09/30] mfd: cros_ec: Remove zero-size structs Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 10/30] mfd: cros_ec: Add Flash V2 commands API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 11/30] mfd: cros_ec: Add PWM_SET_DUTY API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 12/30] mfd: cros_ec: Add lightbar v2 API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 13/30] mfd: cros_ec: Expand hash API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 14/30] mfd: cros_ec: Add EC transport protocol v4 Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 15/30] mfd: cros_ec: Complete MEMS sensor API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 16/30] mfd: cros_ec: Fix event processing API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 17/30] mfd: cros_ec: Add fingerprint API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 18/30] mfd: cros_ec: Fix temperature API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 19/30] mfd: cros_ec: Complete Power and USB PD API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 20/30] mfd: cros_ec: Add API for keyboard testing Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 21/30] mfd: cros_ec: Add Hibernate API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 22/30] mfd: cros_ec: Add Smart Battery Firmware update API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 23/30] mfd: cros_ec: Add I2C passthru protection API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 24/30] mfd: cros_ec: Add API for EC-EC communication Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 25/30] mfd: cros_ec: Add API for Touchpad support Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 26/30] mfd: cros_ec: Add API for Fingerprint support Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 27/30] mfd: cros_ec: Add API for rwsig Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 28/30] mfd: cros_ec: Add SKU ID and Secure storage API Gwendal Grignou
2019-05-09 21:13 ` Gwendal Grignou [this message]
2019-05-09 21:13 ` [PATCH v3 30/30] mfd: cros_ec: Update I2S API Gwendal Grignou
2019-05-17 22:48 ` [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
2019-05-18  6:39   ` Lee Jones
2019-05-21 17:44     ` Benson Leung
2019-05-22  5:53       ` Lee Jones
2019-05-21 13:45 ` [alsa-devel] " Fabien Lahoudere
2019-05-22  5:53   ` Lee Jones
2019-06-03 12:53 ` Lee Jones

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190509211353.213194-30-gwendal@chromium.org \
    --to=gwendal@chromium.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=bleung@chromium.org \
    --cc=broonie@kernel.org \
    --cc=cychiang@chromium.org \
    --cc=enric.balletbo@collabora.com \
    --cc=groeck@chromium.org \
    --cc=jic23@kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org
	public-inbox-index linux-iio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git