Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
* [PULL] First set of IIO fixes for the 5.2 cycle.
@ 2019-05-19  8:33 Jonathan Cameron
  2019-05-20  7:16 ` Greg KH
  0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Cameron @ 2019-05-19  8:33 UTC (permalink / raw)
  To: gregkh, linux-iio

The following changes since commit 131ac62253dba79daf4a6d83ab12293d2b9863d3:

  staging: most: core: use device description as name (2019-04-02 20:23:07 +0200)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-5.2a

for you to fetch changes up to e6d12298310fa1dc11f1d747e05b168016057fdd:

  iio: adc: ti-ads8688: fix timestamp is not updated in buffer (2019-05-11 12:50:18 +0100)

----------------------------------------------------------------
First set of IIO fixes for the 5.2 cycle.

* ads124
  - Avoid a buffer overrun when setting an array to 0.
* ads8688
  - Don't use the pollfunc timestamp as it isn't set and would be wrong
    anyway for a device that does sampling on demand.
* ds4422
  - Fix masking on register used for chip verification. Wrong address
    was being read.
* mpu6050
  - Fix the fifo layout for ICM20602 to avoid underreading and hence failure
    to move on to the next record in the fifo.
* NPCM ADC
  - Make sure there is actually a valid regulator before reading its voltage.

----------------------------------------------------------------
Ruslan Babayev (1):
      iio: dac: ds4422/ds4424 fix chip verification

Sean Nyekjaer (1):
      iio: adc: ti-ads8688: fix timestamp is not updated in buffer

Steve Moskovchenko (1):
      iio: imu: mpu6050: Fix FIFO layout for ICM20602

Tomer Maimon (1):
      iio: adc: modify NPCM ADC read reference voltage

Vincent Stehlé (1):
      iio: adc: ads124: avoid buffer overflow

 drivers/iio/adc/npcm_adc.c                 |  2 +-
 drivers/iio/adc/ti-ads124s08.c             |  2 +-
 drivers/iio/adc/ti-ads8688.c               |  2 +-
 drivers/iio/dac/ds4424.c                   |  2 +-
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 46 +++++++++++++++++++++++++++---
 drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h  | 20 ++++++++++++-
 drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c |  3 ++
 7 files changed, 68 insertions(+), 9 deletions(-)

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PULL] First set of IIO fixes for the 5.2 cycle.
  2019-05-19  8:33 [PULL] First set of IIO fixes for the 5.2 cycle Jonathan Cameron
@ 2019-05-20  7:16 ` Greg KH
  0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2019-05-20  7:16 UTC (permalink / raw)
  To: Jonathan Cameron; +Cc: linux-iio

On Sun, May 19, 2019 at 09:33:56AM +0100, Jonathan Cameron wrote:
> The following changes since commit 131ac62253dba79daf4a6d83ab12293d2b9863d3:
> 
>   staging: most: core: use device description as name (2019-04-02 20:23:07 +0200)
> 
> are available in the Git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-5.2a

Pulled and pushed out, thanks.

greg k-h

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-19  8:33 [PULL] First set of IIO fixes for the 5.2 cycle Jonathan Cameron
2019-05-20  7:16 ` Greg KH

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org linux-iio@archiver.kernel.org
	public-inbox-index linux-iio


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/ public-inbox