linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jonathan.cameron@huawei.com>
To: Enric Balletbo Serra <eballetbo@gmail.com>
Cc: Gwendal Grignou <gwendal@chromium.org>,
	Jonathan Cameron <jic23@kernel.org>,
	Enric Balletbo i Serra <enric.balletbo@collabora.com>,
	Benson Leung <bleung@chromium.org>,
	Guenter Roeck <groeck@chromium.org>,
	"Lee Jones" <lee.jones@linaro.org>, <linux-iio@vger.kernel.org>,
	linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v7 2/2] iio: cros_ec: Add lid angle driver
Date: Fri, 21 Jun 2019 16:31:12 +0100	[thread overview]
Message-ID: <20190621163112.00005914@huawei.com> (raw)
In-Reply-To: <CAFqH_53orAG1d3k11517_qP5fC=V1RR14yZHK6VUgcvS-2wgEg@mail.gmail.com>

On Wed, 19 Jun 2019 22:49:04 +0200
Enric Balletbo Serra <eballetbo@gmail.com> wrote:

> Missatge de Gwendal Grignou <gwendal@chromium.org> del dia dv., 14 de
> juny 2019 a les 23:56:
> >
> > On Sat, May 18, 2019 at 2:53 AM Jonathan Cameron <jic23@kernel.org> wrote:  
> > >
> > > On Fri, 17 May 2019 16:38:56 -0700
> > > Gwendal Grignou <gwendal@chromium.org> wrote:
> > >  
> > > > Add a IIO driver that reports the angle between the lid and the base for
> > > > ChromeOS convertible device.
> > > >
> > > > Tested on eve with ToT EC firmware.
> > > > Check driver is loaded and lid angle is correct.
> > > >
> > > > Signed-off-by: Gwendal Grignou <gwendal@chromium.org>  
> > > Hi Gwendal.
> > >
> > > Please do list dependencies in patches.  I think this one is still
> > > dependent on the larger set of MFD changes.
> > >
> > > For my reference
> > >
> > > Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> > >
> > > Please do poke if this seems to have gotten lost once the precursors
> > > are upstream.  
> > The large set of MFD changes for update cros_ec_commands.h has landed
> > in a immutable branch:
> > git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git branch
> > ib-mfd-cros-5.3.
> >  
> 
> Jonathan, if you don't want to deal with the big patchset that this
> depends and the immutable branch, I can pick the patch and can go
> through the chrome-platform tree. I think it is unlikely have merge
> conflicts, as these patches only touch cros-ec iio parts and, anyway,
> I'll need to deal with the immutable branch because other patches also
> depends on the ib.

That would be great thanks.

I'll almost always take the option that involves me doing less work ;)

Jonathan

> 
> Thanks,
> ~ Enric
> 
> > Thanks,
> > Gwendal.
> >
> >  
> > >
> > > Thanks,
> > >
> > > Jonathan
> > >  
> > > > ---
> > > > Changes in v7:
> > > > - Split patch in two: This is the IIO section.
> > > >
> > > > Changes in v6:
> > > > - Fix lock held in an error path error.
> > > >
> > > > Changes in v5:
> > > > - Remove unnecessary define.
> > > > - v4 was the wrong patch file
> > > >
> > > > Changes in v3:
> > > > - Use static channel array, simplify code because index is always 0.
> > > >
> > > > Changes in v2:
> > > > - Fix license, remove driver_module field.
> > > >
> > > >  drivers/iio/common/cros_ec_sensors/Kconfig    |   9 ++
> > > >  drivers/iio/common/cros_ec_sensors/Makefile   |   1 +
> > > >  .../cros_ec_sensors/cros_ec_lid_angle.c       | 139 ++++++++++++++++++
> > > >  3 files changed, 149 insertions(+)
> > > >  create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
> > > >
> > > > diff --git a/drivers/iio/common/cros_ec_sensors/Kconfig b/drivers/iio/common/cros_ec_sensors/Kconfig
> > > > index 135f6825903f..aacc2ab9c34f 100644
> > > > --- a/drivers/iio/common/cros_ec_sensors/Kconfig
> > > > +++ b/drivers/iio/common/cros_ec_sensors/Kconfig
> > > > @@ -20,3 +20,12 @@ config IIO_CROS_EC_SENSORS
> > > >         Accelerometers, Gyroscope and Magnetometer that are
> > > >         presented by the ChromeOS EC Sensor hub.
> > > >         Creates an IIO device for each functions.
> > > > +
> > > > +config IIO_CROS_EC_SENSORS_LID_ANGLE
> > > > +     tristate "ChromeOS EC Sensor for lid angle"
> > > > +     depends on IIO_CROS_EC_SENSORS_CORE
> > > > +     help
> > > > +       Module to report the angle between lid and base for some
> > > > +       convertible devices.
> > > > +       This module is loaded when the EC can calculate the angle between the base
> > > > +       and the lid.
> > > > diff --git a/drivers/iio/common/cros_ec_sensors/Makefile b/drivers/iio/common/cros_ec_sensors/Makefile
> > > > index ec716ff2a775..a35ee232ac07 100644
> > > > --- a/drivers/iio/common/cros_ec_sensors/Makefile
> > > > +++ b/drivers/iio/common/cros_ec_sensors/Makefile
> > > > @@ -4,3 +4,4 @@
> > > >
> > > >  obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros_ec_sensors_core.o
> > > >  obj-$(CONFIG_IIO_CROS_EC_SENSORS) += cros_ec_sensors.o
> > > > +obj-$(CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE) += cros_ec_lid_angle.o
> > > > diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
> > > > new file mode 100644
> > > > index 000000000000..876dfd176b0e
> > > > --- /dev/null
> > > > +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
> > > > @@ -0,0 +1,139 @@
> > > > +// SPDX-License-Identifier: GPL-2.0
> > > > +
> > > > +/*
> > > > + * cros_ec_lid_angle - Driver for CrOS EC lid angle sensor.
> > > > + *
> > > > + * Copyright 2018 Google, Inc
> > > > + *
> > > > + * This driver uses the cros-ec interface to communicate with the Chrome OS
> > > > + * EC about counter sensors. Counters are presented through
> > > > + * iio sysfs.
> > > > + */
> > > > +
> > > > +#include <linux/delay.h>
> > > > +#include <linux/device.h>
> > > > +#include <linux/iio/buffer.h>
> > > > +#include <linux/iio/common/cros_ec_sensors_core.h>
> > > > +#include <linux/iio/iio.h>
> > > > +#include <linux/iio/kfifo_buf.h>
> > > > +#include <linux/iio/trigger.h>
> > > > +#include <linux/iio/triggered_buffer.h>
> > > > +#include <linux/iio/trigger_consumer.h>
> > > > +#include <linux/kernel.h>
> > > > +#include <linux/mfd/cros_ec.h>
> > > > +#include <linux/mfd/cros_ec_commands.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/platform_device.h>
> > > > +#include <linux/slab.h>
> > > > +
> > > > +#define DRV_NAME "cros-ec-lid-angle"
> > > > +
> > > > +/*
> > > > + * One channel for the lid angle, the other for timestamp.
> > > > + */
> > > > +static const struct iio_chan_spec cros_ec_lid_angle_channels[] = {
> > > > +     {
> > > > +             .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > > > +             .scan_type.realbits = CROS_EC_SENSOR_BITS,
> > > > +             .scan_type.storagebits = CROS_EC_SENSOR_BITS,
> > > > +             .scan_type.sign = 'u',
> > > > +             .type = IIO_ANGL
> > > > +     },
> > > > +     IIO_CHAN_SOFT_TIMESTAMP(1)
> > > > +};
> > > > +
> > > > +/* State data for ec_sensors iio driver. */
> > > > +struct cros_ec_lid_angle_state {
> > > > +     /* Shared by all sensors */
> > > > +     struct cros_ec_sensors_core_state core;
> > > > +};
> > > > +
> > > > +static int cros_ec_sensors_read_lid_angle(struct iio_dev *indio_dev,
> > > > +                                       unsigned long scan_mask, s16 *data)
> > > > +{
> > > > +     struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
> > > > +     int ret;
> > > > +
> > > > +     st->param.cmd = MOTIONSENSE_CMD_LID_ANGLE;
> > > > +     ret = cros_ec_motion_send_host_cmd(st, sizeof(st->resp->lid_angle));
> > > > +     if (ret) {
> > > > +             dev_warn(&indio_dev->dev, "Unable to read lid angle\n");
> > > > +             return ret;
> > > > +     }
> > > > +
> > > > +     *data = st->resp->lid_angle.value;
> > > > +     return 0;
> > > > +}
> > > > +
> > > > +static int cros_ec_lid_angle_read(struct iio_dev *indio_dev,
> > > > +                                 struct iio_chan_spec const *chan,
> > > > +                                 int *val, int *val2, long mask)
> > > > +{
> > > > +     struct cros_ec_lid_angle_state *st = iio_priv(indio_dev);
> > > > +     s16 data;
> > > > +     int ret;
> > > > +
> > > > +     mutex_lock(&st->core.cmd_lock);
> > > > +     ret = cros_ec_sensors_read_lid_angle(indio_dev, 1, &data);
> > > > +     if (ret == 0) {
> > > > +             *val = data;
> > > > +             ret = IIO_VAL_INT;
> > > > +     }
> > > > +     mutex_unlock(&st->core.cmd_lock);
> > > > +     return ret;
> > > > +}
> > > > +
> > > > +static const struct iio_info cros_ec_lid_angle_info = {
> > > > +     .read_raw = &cros_ec_lid_angle_read,
> > > > +};
> > > > +
> > > > +static int cros_ec_lid_angle_probe(struct platform_device *pdev)
> > > > +{
> > > > +     struct device *dev = &pdev->dev;
> > > > +     struct iio_dev *indio_dev;
> > > > +     struct cros_ec_lid_angle_state *state;
> > > > +     int ret;
> > > > +
> > > > +     indio_dev = devm_iio_device_alloc(dev, sizeof(*state));
> > > > +     if (!indio_dev)
> > > > +             return -ENOMEM;
> > > > +
> > > > +     ret = cros_ec_sensors_core_init(pdev, indio_dev, false);
> > > > +     if (ret)
> > > > +             return ret;
> > > > +
> > > > +     indio_dev->info = &cros_ec_lid_angle_info;
> > > > +     state = iio_priv(indio_dev);
> > > > +     indio_dev->channels = cros_ec_lid_angle_channels;
> > > > +     indio_dev->num_channels = ARRAY_SIZE(cros_ec_lid_angle_channels);
> > > > +
> > > > +     state->core.read_ec_sensors_data = cros_ec_sensors_read_lid_angle;
> > > > +
> > > > +     ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
> > > > +                     cros_ec_sensors_capture, NULL);
> > > > +     if (ret)
> > > > +             return ret;
> > > > +
> > > > +     return devm_iio_device_register(dev, indio_dev);
> > > > +}
> > > > +
> > > > +static const struct platform_device_id cros_ec_lid_angle_ids[] = {
> > > > +     {
> > > > +             .name = DRV_NAME,
> > > > +     },
> > > > +     { /* sentinel */ }
> > > > +};
> > > > +MODULE_DEVICE_TABLE(platform, cros_ec_lid_angle_ids);
> > > > +
> > > > +static struct platform_driver cros_ec_lid_angle_platform_driver = {
> > > > +     .driver = {
> > > > +             .name   = DRV_NAME,
> > > > +             .pm     = &cros_ec_sensors_pm_ops,
> > > > +     },
> > > > +     .probe          = cros_ec_lid_angle_probe,
> > > > +     .id_table       = cros_ec_lid_angle_ids,
> > > > +};
> > > > +module_platform_driver(cros_ec_lid_angle_platform_driver);
> > > > +
> > > > +MODULE_DESCRIPTION("ChromeOS EC driver for reporting convertible lid angle.");
> > > > +MODULE_LICENSE("GPL v2");  
> > >  



  reply	other threads:[~2019-06-21 15:31 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-17 23:38 [PATCH v7 0/2] iio: cros_ec: Add lid angle driver Gwendal Grignou
2019-05-17 23:38 ` [PATCH v7 1/2] mfd: cros_ec: Register cros_ec_lid_angle driver when presented Gwendal Grignou
2019-06-03 12:31   ` Lee Jones
2019-05-17 23:38 ` [PATCH v7 2/2] iio: cros_ec: Add lid angle driver Gwendal Grignou
2019-05-18  9:53   ` Jonathan Cameron
2019-06-14 21:54     ` Gwendal Grignou
2019-06-19 20:49       ` Enric Balletbo Serra
2019-06-21 15:31         ` Jonathan Cameron [this message]
2019-06-25 13:53           ` Enric Balletbo i Serra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190621163112.00005914@huawei.com \
    --to=jonathan.cameron@huawei.com \
    --cc=bleung@chromium.org \
    --cc=eballetbo@gmail.com \
    --cc=enric.balletbo@collabora.com \
    --cc=groeck@chromium.org \
    --cc=gwendal@chromium.org \
    --cc=jic23@kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).