From: Tomasz Duszynski <tduszyns@gmail.com>
To: linux-iio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
jic23@kernel.org, robh+dt@kernel.org,
Tomasz Duszynski <tduszyns@gmail.com>
Subject: [PATCH 1/2] dt-bindings: iio: chemical: pms7003: convert bindings to yaml
Date: Wed, 10 Jul 2019 21:21:54 +0200 [thread overview]
Message-ID: <20190710192155.11489-2-tduszyns@gmail.com> (raw)
In-Reply-To: <20190710192155.11489-1-tduszyns@gmail.com>
Convert existing device tree bindings to yaml.
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
---
.../iio/chemical/plantower,pms7003.txt | 26 ----------
.../iio/chemical/plantower,pms7003.yaml | 51 +++++++++++++++++++
2 files changed, 51 insertions(+), 26 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
create mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
deleted file mode 100644
index c52ea2126eaa..000000000000
--- a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* Plantower PMS7003 particulate matter sensor
-
-Required properties:
-- compatible: must one of:
- "plantower,pms1003"
- "plantower,pms3003"
- "plantower,pms5003"
- "plantower,pms6003"
- "plantower,pms7003"
- "plantower,pmsa003"
-- vcc-supply: phandle to the regulator that provides power to the sensor
-
-Optional properties:
-- plantower,set-gpios: phandle to the GPIO connected to the SET line
-- reset-gpios: phandle to the GPIO connected to the RESET line
-
-Refer to serial/slave-device.txt for generic serial attached device bindings.
-
-Example:
-
-&uart0 {
- air-pollution-sensor {
- compatible = "plantower,pms7003";
- vcc-supply = <®_vcc5v0>;
- };
-};
diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
new file mode 100644
index 000000000000..a551d3101f93
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/plantower,pms7003.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Plantower PMS7003 air pollution sensor
+
+maintainers:
+ - Tomasz Duszynski <tduszyns@gmail.com>
+
+description: |
+ Air pollution sensor capable of measuring mass concentration of dust
+ particles.
+
+properties:
+ compatible:
+ enum:
+ - plantower,pms1003
+ - plantower,pms3003
+ - plantower,pms5003
+ - plantower,pms6003
+ - plantower,pms7003
+ - plantower,pmsa003
+
+ vcc-supply:
+ description: regulator that provides power to the sensor
+ maxItems: 1
+
+ plantower,set-gpios:
+ description: GPIO connected to the SET line
+ maxItems: 1
+
+ reset-gpios:
+ description: GPIO connected to the RESET line
+ maxItems: 1
+
+required:
+ - compatible
+ - vcc-supply
+
+examples:
+ - |
+ serial {
+ air-pollution-sensor {
+ compatible = "plantower,pms7003";
+ vcc-supply = <®_vcc5v0>;
+ };
+ };
+
+...
--
2.22.0
next prev parent reply other threads:[~2019-07-10 19:22 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-10 19:21 [PATCH 0/2] iio: chemical: pms7003: convert bindings to yaml Tomasz Duszynski
2019-07-10 19:21 ` Tomasz Duszynski [this message]
2019-07-10 20:12 ` [PATCH 1/2] dt-bindings: " Rob Herring
2019-07-14 11:36 ` Jonathan Cameron
2019-07-10 19:21 ` [PATCH 2/2] MAINTAINERS: add entry for plantower pms7003 driver Tomasz Duszynski
2019-07-14 11:36 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190710192155.11489-2-tduszyns@gmail.com \
--to=tduszyns@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).