linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Beniamin Bia <beniamin.bia@analog.com>
To: <jic23@kernel.org>
Cc: <linux-iio@vger.kernel.org>, <biabeniamin@outlook.com>,
	Beniamin Bia <beniamin.bia@analog.com>
Subject: [PATCH 5/5] iio: adc: ad7606: Add debug mode for ad7616
Date: Thu, 18 Jul 2019 09:27:34 +0300	[thread overview]
Message-ID: <20190718062734.17306-5-beniamin.bia@analog.com> (raw)
In-Reply-To: <20190718062734.17306-1-beniamin.bia@analog.com>

Support for register access was added for devices which have software
mode.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
---
Changes in v2:
-nothing changed

 drivers/iio/adc/ad7606.c | 33 ++++++++++++++++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
index be2330c8b277..ed2d08437e5d 100644
--- a/drivers/iio/adc/ad7606.c
+++ b/drivers/iio/adc/ad7606.c
@@ -60,6 +60,29 @@ static int ad7606_reset(struct ad7606_state *st)
 	return -ENODEV;
 }
 
+static int ad7606_reg_access(struct iio_dev *indio_dev,
+			     unsigned int reg,
+			     unsigned int writeval,
+			     unsigned int *readval)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+	if (readval) {
+		ret = st->bops->reg_read(st, reg);
+		if (ret < 0)
+			goto err_unlock;
+		*readval = ret;
+		ret = 0;
+	} else {
+		ret = st->bops->reg_write(st, reg, writeval);
+	}
+err_unlock:
+	mutex_unlock(&st->lock);
+	return ret;
+}
+
 static int ad7606_read_samples(struct ad7606_state *st)
 {
 	unsigned int num = st->chip_info->num_channels;
@@ -501,6 +524,14 @@ static const struct iio_info ad7606_info_os_and_range = {
 	.validate_trigger = &ad7606_validate_trigger,
 };
 
+static const struct iio_info ad7606_info_os_range_and_debug = {
+	.read_raw = &ad7606_read_raw,
+	.write_raw = &ad7606_write_raw,
+	.debugfs_reg_access = &ad7606_reg_access,
+	.attrs = &ad7606_attribute_group_os_and_range,
+	.validate_trigger = &ad7606_validate_trigger,
+};
+
 static const struct iio_info ad7606_info_os = {
 	.read_raw = &ad7606_read_raw,
 	.write_raw = &ad7606_write_raw,
@@ -617,7 +648,7 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
 
 		/* After reset, in software mode, ±10 V is set by default */
 		memset32(st->range, 2, ARRAY_SIZE(st->range));
-		indio_dev->info = &ad7606_info_os_and_range;
+		indio_dev->info = &ad7606_info_os_range_and_debug;
 
 		ret = st->bops->sw_mode_config(indio_dev);
 		if (ret < 0)
-- 
2.17.1


  parent reply	other threads:[~2019-07-18  6:28 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-18  6:27 [PATCH 1/5] iio: adc: ad7606: Move common channel definition to header Beniamin Bia
2019-07-18  6:27 ` [PATCH 2/5] iio: adc: ad7606: Move spi dependent features to spi file Beniamin Bia
2019-07-28  7:57   ` Jonathan Cameron
2019-07-18  6:27 ` [PATCH 3/5] iio: adc: ad7606: Allow reconfigration after reset Beniamin Bia
2019-07-28  7:57   ` Jonathan Cameron
2019-07-18  6:27 ` [PATCH 4/5] iio: adc: ad7606: Add support for software mode for ad7616 Beniamin Bia
2019-07-28  7:58   ` Jonathan Cameron
2019-07-18  6:27 ` Beniamin Bia [this message]
2019-07-28  7:58   ` [PATCH 5/5] iio: adc: ad7606: Add debug " Jonathan Cameron
2019-07-28  7:57 ` [PATCH 1/5] iio: adc: ad7606: Move common channel definition to header Jonathan Cameron
  -- strict thread matches above, loose matches on Subject: below --
2019-07-03 14:36 Beniamin Bia
2019-07-03 14:36 ` [PATCH 5/5] iio: adc: ad7606: Add debug mode for ad7616 Beniamin Bia
2019-07-14 15:57   ` Jonathan Cameron
2019-05-16 14:32 [PATCH 1/5] iio: adc: ad7606: Move oversampling and scale options to chip info Beniamin Bia
2019-05-16 14:32 ` [PATCH 5/5] iio: adc: ad7606: Add debug mode for ad7616 Beniamin Bia
2019-05-18 10:24   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190718062734.17306-5-beniamin.bia@analog.com \
    --to=beniamin.bia@analog.com \
    --cc=biabeniamin@outlook.com \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).