Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] iio: potentiometer: add a driver for Maxim 5432-5435
@ 2019-07-21 17:59 Martin Kaiser
  2019-07-21 20:48 ` Peter Meerwald-Stadler
                   ` (4 more replies)
  0 siblings, 5 replies; 13+ messages in thread
From: Martin Kaiser @ 2019-07-21 17:59 UTC (permalink / raw)
  To: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen, Rob Herring
  Cc: linux-iio, devicetree, linux-kernel, Martin Kaiser

Add a driver for the Maxim Integrated MAX5432-MAX5435 family of digital
potentiometers.

These potentiometers are connected via I2C and have 32 wiper positions.

Supported functionality
- set the volatile wiper position
- read the potentiometer scale

Datasheet:
https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
 .../bindings/iio/potentiometer/max5432.txt         |  22 ++++
 drivers/iio/potentiometer/Kconfig                  |  11 ++
 drivers/iio/potentiometer/Makefile                 |   1 +
 drivers/iio/potentiometer/max5432.c                | 131 +++++++++++++++++++++
 4 files changed, 165 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/max5432.txt
 create mode 100644 drivers/iio/potentiometer/max5432.c

diff --git a/Documentation/devicetree/bindings/iio/potentiometer/max5432.txt b/Documentation/devicetree/bindings/iio/potentiometer/max5432.txt
new file mode 100644
index 000000000000..89ccc8fc7df1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/max5432.txt
@@ -0,0 +1,22 @@
+* Maxim Integrated MAX5432-MAX5435 Digital Potentiometers.
+
+The node for this driver must be a child node of an I2C controller, hence
+all mandatory properties for your controller must be specified. See directory:
+
+        Documentation/devicetree/bindings/i2c
+
+for more details.
+
+Required properties:
+	- compatible:  	Must be one of the following, depending on the
+			model:
+			"maxim,max5432"
+			"maxim,max5433"
+			"maxim,max5434"
+			"maxim,max5435"
+
+Example:
+max5434@28 {
+	compatible = "maxim,max5434";
+	reg = <0x28>;
+};
diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
index ebc7c72a5e36..4cac0173db8b 100644
--- a/drivers/iio/potentiometer/Kconfig
+++ b/drivers/iio/potentiometer/Kconfig
@@ -26,6 +26,17 @@ config DS1803
 	  To compile this driver as a module, choose M here: the
 	  module will be called ds1803.
 
+config MAX5432
+	tristate "Maxim MAX5432-MAX5435 Digital Potentiometer driver"
+	depends on I2C
+	help
+	  Say yes here to build support for the Maxim
+	  MAX5432, MAX5433, MAX5434 and MAX5435 digital
+	  potentiometer chips.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called max5432.
+
 config MAX5481
 	tristate "Maxim MAX5481-MAX5484 Digital Potentiometer driver"
 	depends on SPI
diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile
index 8ff55138cf12..091adf3cdd0b 100644
--- a/drivers/iio/potentiometer/Makefile
+++ b/drivers/iio/potentiometer/Makefile
@@ -6,6 +6,7 @@
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AD5272) += ad5272.o
 obj-$(CONFIG_DS1803) += ds1803.o
+obj-$(CONFIG_MAX5432) += max5432.o
 obj-$(CONFIG_MAX5481) += max5481.o
 obj-$(CONFIG_MAX5487) += max5487.o
 obj-$(CONFIG_MCP4018) += mcp4018.o
diff --git a/drivers/iio/potentiometer/max5432.c b/drivers/iio/potentiometer/max5432.c
new file mode 100644
index 000000000000..959883297fb5
--- /dev/null
+++ b/drivers/iio/potentiometer/max5432.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Maxim Integrated MAX5432-MAX5435 digital potentiometer driver
+ * Copyright (C) 2019 Martin Kaiser <martin@kaiser.cx>
+ *
+ * Datasheet:
+ * https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf
+ */
+
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+/* All chip variants have 32 wiper positions. */
+#define MAX5432_MAX_POS 31
+
+#define OHM_50K   (50  * 1000)
+#define OHM_100K  (100 * 1000)
+
+/* Update the volatile (currently active) setting. */
+#define CMD_VREG  0x11
+
+struct max5432_data {
+	struct i2c_client *client;
+	u32 ohm;
+};
+
+static const struct iio_chan_spec max5432_channels[] = {
+	{
+		.type = IIO_RESISTANCE,
+		.indexed = 1,
+		.output = 1,
+		.channel = 0,
+		.address = CMD_VREG,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+	}
+};
+
+static int max5432_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct max5432_data *data = iio_priv(indio_dev);
+
+	if (mask != IIO_CHAN_INFO_SCALE)
+		return -EINVAL;
+
+	*val = data->ohm;
+	*val2 = MAX5432_MAX_POS;
+
+	return IIO_VAL_FRACTIONAL;
+}
+
+static int max5432_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct max5432_data *data = iio_priv(indio_dev);
+	u8 data_byte;
+
+	if (mask != IIO_CHAN_INFO_RAW)
+		return -EINVAL;
+
+	if (val < 0 || val > MAX5432_MAX_POS)
+		return -EINVAL;
+
+	if (val2 != 0)
+		return -EINVAL;
+
+	/* Wiper position is in bits D7-D3. (D2-D0 are don't care bits.) */
+	data_byte = val << 3;
+	return i2c_smbus_write_byte_data(
+			data->client, chan->address, data_byte);
+}
+
+static const struct iio_info max5432_info = {
+	.read_raw = max5432_read_raw,
+	.write_raw = max5432_write_raw,
+};
+
+static int max5432_probe(
+		struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct iio_dev *indio_dev;
+	struct max5432_data *data;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(struct max5432_data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, indio_dev);
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	data->ohm = (u32)of_device_get_match_data(dev);
+
+	indio_dev->dev.parent = dev;
+	indio_dev->info = &max5432_info;
+	indio_dev->channels = max5432_channels;
+	indio_dev->num_channels = ARRAY_SIZE(max5432_channels);
+	indio_dev->name = client->name;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct of_device_id max5432_dt_ids[] = {
+	{ .compatible = "maxim,max5432", .data = (void *)OHM_50K  },
+	{ .compatible = "maxim,max5433", .data = (void *)OHM_100K },
+	{ .compatible = "maxim,max5434", .data = (void *)OHM_50K  },
+	{ .compatible = "maxim,max5435", .data = (void *)OHM_100K },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, max5432_dt_ids);
+
+static struct i2c_driver max5432_driver = {
+	.driver = {
+		.name = "max5432",
+		.of_match_table = of_match_ptr(max5432_dt_ids),
+	},
+	.probe = max5432_probe,
+};
+
+module_i2c_driver(max5432_driver);
+
+MODULE_AUTHOR("Martin Kaiser <martin@kaiser.cx>");
+MODULE_DESCRIPTION("max5432-max5435 digital potentiometers");
+MODULE_LICENSE("GPL v2");
-- 
2.11.0


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH] iio: potentiometer: add a driver for Maxim 5432-5435
  2019-07-21 17:59 [PATCH] iio: potentiometer: add a driver for Maxim 5432-5435 Martin Kaiser
@ 2019-07-21 20:48 ` Peter Meerwald-Stadler
  2019-07-22 20:13 ` kbuild test robot
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 13+ messages in thread
From: Peter Meerwald-Stadler @ 2019-07-21 20:48 UTC (permalink / raw)
  To: Martin Kaiser; +Cc: Jonathan Cameron, linux-iio, linux-kernel

On Sun, 21 Jul 2019, Martin Kaiser wrote:

> Add a driver for the Maxim Integrated MAX5432-MAX5435 family of digital
> potentiometers.
> 
> These potentiometers are connected via I2C and have 32 wiper positions.
> 
> Supported functionality
> - set the volatile wiper position
> - read the potentiometer scale

please see some minor comment below
 
> Datasheet:
> https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf
> 
> Signed-off-by: Martin Kaiser <martin@kaiser.cx>
> ---
>  .../bindings/iio/potentiometer/max5432.txt         |  22 ++++
>  drivers/iio/potentiometer/Kconfig                  |  11 ++
>  drivers/iio/potentiometer/Makefile                 |   1 +
>  drivers/iio/potentiometer/max5432.c                | 131 +++++++++++++++++++++
>  4 files changed, 165 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/max5432.txt
>  create mode 100644 drivers/iio/potentiometer/max5432.c
> 
> diff --git a/Documentation/devicetree/bindings/iio/potentiometer/max5432.txt b/Documentation/devicetree/bindings/iio/potentiometer/max5432.txt
> new file mode 100644
> index 000000000000..89ccc8fc7df1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/potentiometer/max5432.txt
> @@ -0,0 +1,22 @@
> +* Maxim Integrated MAX5432-MAX5435 Digital Potentiometers.
> +
> +The node for this driver must be a child node of an I2C controller, hence
> +all mandatory properties for your controller must be specified. See directory:
> +
> +        Documentation/devicetree/bindings/i2c
> +
> +for more details.
> +
> +Required properties:
> +	- compatible:  	Must be one of the following, depending on the
> +			model:
> +			"maxim,max5432"
> +			"maxim,max5433"
> +			"maxim,max5434"
> +			"maxim,max5435"
> +
> +Example:
> +max5434@28 {
> +	compatible = "maxim,max5434";
> +	reg = <0x28>;
> +};
> diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
> index ebc7c72a5e36..4cac0173db8b 100644
> --- a/drivers/iio/potentiometer/Kconfig
> +++ b/drivers/iio/potentiometer/Kconfig
> @@ -26,6 +26,17 @@ config DS1803
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called ds1803.
>  
> +config MAX5432
> +	tristate "Maxim MAX5432-MAX5435 Digital Potentiometer driver"
> +	depends on I2C
> +	help
> +	  Say yes here to build support for the Maxim
> +	  MAX5432, MAX5433, MAX5434 and MAX5435 digital
> +	  potentiometer chips.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called max5432.
> +
>  config MAX5481
>  	tristate "Maxim MAX5481-MAX5484 Digital Potentiometer driver"
>  	depends on SPI
> diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile
> index 8ff55138cf12..091adf3cdd0b 100644
> --- a/drivers/iio/potentiometer/Makefile
> +++ b/drivers/iio/potentiometer/Makefile
> @@ -6,6 +6,7 @@
>  # When adding new entries keep the list in alphabetical order
>  obj-$(CONFIG_AD5272) += ad5272.o
>  obj-$(CONFIG_DS1803) += ds1803.o
> +obj-$(CONFIG_MAX5432) += max5432.o
>  obj-$(CONFIG_MAX5481) += max5481.o
>  obj-$(CONFIG_MAX5487) += max5487.o
>  obj-$(CONFIG_MCP4018) += mcp4018.o
> diff --git a/drivers/iio/potentiometer/max5432.c b/drivers/iio/potentiometer/max5432.c
> new file mode 100644
> index 000000000000..959883297fb5
> --- /dev/null
> +++ b/drivers/iio/potentiometer/max5432.c
> @@ -0,0 +1,131 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Maxim Integrated MAX5432-MAX5435 digital potentiometer driver
> + * Copyright (C) 2019 Martin Kaiser <martin@kaiser.cx>
> + *
> + * Datasheet:
> + * https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/iio/iio.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +
> +/* All chip variants have 32 wiper positions. */
> +#define MAX5432_MAX_POS 31
> +
> +#define OHM_50K   (50  * 1000)
> +#define OHM_100K  (100 * 1000)

MAX5432_ prefix please

> +
> +/* Update the volatile (currently active) setting. */
> +#define CMD_VREG  0x11

MAX5432_ prefix please

> +
> +struct max5432_data {
> +	struct i2c_client *client;
> +	u32 ohm;
> +};
> +
> +static const struct iio_chan_spec max5432_channels[] = {
> +	{
> +		.type = IIO_RESISTANCE,
> +		.indexed = 1,
> +		.output = 1,
> +		.channel = 0,
> +		.address = CMD_VREG,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> +		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
> +	}
> +};
> +
> +static int max5432_read_raw(struct iio_dev *indio_dev,
> +			    struct iio_chan_spec const *chan,
> +			    int *val, int *val2, long mask)
> +{
> +	struct max5432_data *data = iio_priv(indio_dev);
> +
> +	if (mask != IIO_CHAN_INFO_SCALE)
> +		return -EINVAL;
> +
> +	*val = data->ohm;
> +	*val2 = MAX5432_MAX_POS;
> +
> +	return IIO_VAL_FRACTIONAL;
> +}
> +
> +static int max5432_write_raw(struct iio_dev *indio_dev,
> +			     struct iio_chan_spec const *chan,
> +			     int val, int val2, long mask)
> +{
> +	struct max5432_data *data = iio_priv(indio_dev);
> +	u8 data_byte;
> +
> +	if (mask != IIO_CHAN_INFO_RAW)
> +		return -EINVAL;
> +
> +	if (val < 0 || val > MAX5432_MAX_POS)
> +		return -EINVAL;
> +
> +	if (val2 != 0)
> +		return -EINVAL;
> +
> +	/* Wiper position is in bits D7-D3. (D2-D0 are don't care bits.) */
> +	data_byte = val << 3;
> +	return i2c_smbus_write_byte_data(
> +			data->client, chan->address, data_byte);
> +}
> +
> +static const struct iio_info max5432_info = {
> +	.read_raw = max5432_read_raw,
> +	.write_raw = max5432_write_raw,
> +};
> +
> +static int max5432_probe(
> +		struct i2c_client *client, const struct i2c_device_id *id)
> +{
> +	struct device *dev = &client->dev;
> +	struct iio_dev *indio_dev;
> +	struct max5432_data *data;
> +
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(struct max5432_data));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	i2c_set_clientdata(client, indio_dev);
> +
> +	data = iio_priv(indio_dev);
> +	data->client = client;
> +	data->ohm = (u32)of_device_get_match_data(dev);
> +
> +	indio_dev->dev.parent = dev;
> +	indio_dev->info = &max5432_info;
> +	indio_dev->channels = max5432_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(max5432_channels);
> +	indio_dev->name = client->name;
> +
> +	return devm_iio_device_register(dev, indio_dev);
> +}
> +
> +static const struct of_device_id max5432_dt_ids[] = {
> +	{ .compatible = "maxim,max5432", .data = (void *)OHM_50K  },
> +	{ .compatible = "maxim,max5433", .data = (void *)OHM_100K },
> +	{ .compatible = "maxim,max5434", .data = (void *)OHM_50K  },
> +	{ .compatible = "maxim,max5435", .data = (void *)OHM_100K },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, max5432_dt_ids);
> +
> +static struct i2c_driver max5432_driver = {
> +	.driver = {
> +		.name = "max5432",
> +		.of_match_table = of_match_ptr(max5432_dt_ids),
> +	},
> +	.probe = max5432_probe,
> +};
> +
> +module_i2c_driver(max5432_driver);
> +
> +MODULE_AUTHOR("Martin Kaiser <martin@kaiser.cx>");
> +MODULE_DESCRIPTION("max5432-max5435 digital potentiometers");
> +MODULE_LICENSE("GPL v2");
> 

-- 

Peter Meerwald-Stadler
Mobile: +43 664 24 44 418

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH] iio: potentiometer: add a driver for Maxim 5432-5435
  2019-07-21 17:59 [PATCH] iio: potentiometer: add a driver for Maxim 5432-5435 Martin Kaiser
  2019-07-21 20:48 ` Peter Meerwald-Stadler
@ 2019-07-22 20:13 ` kbuild test robot
  2019-07-23  8:53 ` [PATCH v2] " Martin Kaiser
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 13+ messages in thread
From: kbuild test robot @ 2019-07-22 20:13 UTC (permalink / raw)
  To: Martin Kaiser
  Cc: kbuild-all, Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen,
	Rob Herring, linux-iio, devicetree, linux-kernel, Martin Kaiser

[-- Attachment #1: Type: text/plain, Size: 2219 bytes --]

Hi Martin,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on linus/master]
[also build test WARNING on v5.3-rc1 next-20190722]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Martin-Kaiser/iio-potentiometer-add-a-driver-for-Maxim-5432-5435/20190723-024214
config: arm64-allmodconfig (attached as .config)
compiler: aarch64-linux-gcc (GCC) 7.4.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        GCC_VERSION=7.4.0 make.cross ARCH=arm64 

If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   drivers/iio/potentiometer/max5432.c: In function 'max5432_probe':
>> drivers/iio/potentiometer/max5432.c:99:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
     data->ohm = (u32)of_device_get_match_data(dev);
                 ^

vim +99 drivers/iio/potentiometer/max5432.c

    83	
    84	static int max5432_probe(
    85			struct i2c_client *client, const struct i2c_device_id *id)
    86	{
    87		struct device *dev = &client->dev;
    88		struct iio_dev *indio_dev;
    89		struct max5432_data *data;
    90	
    91		indio_dev = devm_iio_device_alloc(dev, sizeof(struct max5432_data));
    92		if (!indio_dev)
    93			return -ENOMEM;
    94	
    95		i2c_set_clientdata(client, indio_dev);
    96	
    97		data = iio_priv(indio_dev);
    98		data->client = client;
  > 99		data->ohm = (u32)of_device_get_match_data(dev);
   100	
   101		indio_dev->dev.parent = dev;
   102		indio_dev->info = &max5432_info;
   103		indio_dev->channels = max5432_channels;
   104		indio_dev->num_channels = ARRAY_SIZE(max5432_channels);
   105		indio_dev->name = client->name;
   106	
   107		return devm_iio_device_register(dev, indio_dev);
   108	}
   109	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 66313 bytes --]

^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v2] iio: potentiometer: add a driver for Maxim 5432-5435
  2019-07-21 17:59 [PATCH] iio: potentiometer: add a driver for Maxim 5432-5435 Martin Kaiser
  2019-07-21 20:48 ` Peter Meerwald-Stadler
  2019-07-22 20:13 ` kbuild test robot
@ 2019-07-23  8:53 ` " Martin Kaiser
  2019-07-27 20:45   ` Jonathan Cameron
  2019-07-29 11:45 ` [PATCH v3 1/2] " Martin Kaiser
  2019-07-31 14:07 ` [PATCH v4 1/2] iio: potentiometer: add a driver for Maxim 5432-5435 Martin Kaiser
  4 siblings, 1 reply; 13+ messages in thread
From: Martin Kaiser @ 2019-07-23  8:53 UTC (permalink / raw)
  To: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen,
	Peter Meerwald-Stadler, Rob Herring
  Cc: linux-iio, devicetree, linux-kernel, Martin Kaiser

Add a driver for the Maxim Integrated MAX5432-MAX5435 family of digital
potentiometers.

These potentiometers are connected via I2C and have 32 wiper positions.

Supported functionality
- set the volatile wiper position
- read the potentiometer scale

Datasheet:
https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
changes in v2
 - use MAX5432_ prefix for all defines
 - fix indentation
 - convert void * to unsigned long, not to u32
   (warning from kbuild test robot)

 .../bindings/iio/potentiometer/max5432.txt         |  21 ++++
 drivers/iio/potentiometer/Kconfig                  |  11 ++
 drivers/iio/potentiometer/Makefile                 |   1 +
 drivers/iio/potentiometer/max5432.c                | 135 +++++++++++++++++++++
 4 files changed, 168 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/max5432.txt
 create mode 100644 drivers/iio/potentiometer/max5432.c

diff --git a/Documentation/devicetree/bindings/iio/potentiometer/max5432.txt b/Documentation/devicetree/bindings/iio/potentiometer/max5432.txt
new file mode 100644
index 000000000000..6c6ce85e4c85
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/max5432.txt
@@ -0,0 +1,21 @@
+* Maxim Integrated MAX5432-MAX5435 Digital Potentiometers.
+
+The node for this driver must be a child node of an I2C controller, hence
+all mandatory properties for your controller must be specified. See directory:
+
+    Documentation/devicetree/bindings/i2c
+
+for more details.
+
+Required properties:
+- compatible: Must be one of the following, depending on the model:
+    "maxim,max5432"
+    "maxim,max5433"
+    "maxim,max5434"
+    "maxim,max5435"
+
+Example:
+max5434@28 {
+	compatible = "maxim,max5434";
+	reg = <0x28>;
+};
diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
index ebc7c72a5e36..4cac0173db8b 100644
--- a/drivers/iio/potentiometer/Kconfig
+++ b/drivers/iio/potentiometer/Kconfig
@@ -26,6 +26,17 @@ config DS1803
 	  To compile this driver as a module, choose M here: the
 	  module will be called ds1803.
 
+config MAX5432
+	tristate "Maxim MAX5432-MAX5435 Digital Potentiometer driver"
+	depends on I2C
+	help
+	  Say yes here to build support for the Maxim
+	  MAX5432, MAX5433, MAX5434 and MAX5435 digital
+	  potentiometer chips.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called max5432.
+
 config MAX5481
 	tristate "Maxim MAX5481-MAX5484 Digital Potentiometer driver"
 	depends on SPI
diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile
index 8ff55138cf12..091adf3cdd0b 100644
--- a/drivers/iio/potentiometer/Makefile
+++ b/drivers/iio/potentiometer/Makefile
@@ -6,6 +6,7 @@
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AD5272) += ad5272.o
 obj-$(CONFIG_DS1803) += ds1803.o
+obj-$(CONFIG_MAX5432) += max5432.o
 obj-$(CONFIG_MAX5481) += max5481.o
 obj-$(CONFIG_MAX5487) += max5487.o
 obj-$(CONFIG_MCP4018) += mcp4018.o
diff --git a/drivers/iio/potentiometer/max5432.c b/drivers/iio/potentiometer/max5432.c
new file mode 100644
index 000000000000..95251e7c0c34
--- /dev/null
+++ b/drivers/iio/potentiometer/max5432.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Maxim Integrated MAX5432-MAX5435 digital potentiometer driver
+ * Copyright (C) 2019 Martin Kaiser <martin@kaiser.cx>
+ *
+ * Datasheet:
+ * https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf
+ */
+
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+/* All chip variants have 32 wiper positions. */
+#define MAX5432_MAX_POS 31
+
+#define MAX5432_OHM_50K   (50  * 1000)
+#define MAX5432_OHM_100K  (100 * 1000)
+
+/* Update the volatile (currently active) setting. */
+#define MAX5432_CMD_VREG  0x11
+
+struct max5432_data {
+	struct i2c_client *client;
+	unsigned long ohm;
+};
+
+static const struct iio_chan_spec max5432_channels[] = {
+	{
+		.type = IIO_RESISTANCE,
+		.indexed = 1,
+		.output = 1,
+		.channel = 0,
+		.address = MAX5432_CMD_VREG,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+	}
+};
+
+static int max5432_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int *val, int *val2, long mask)
+{
+	struct max5432_data *data = iio_priv(indio_dev);
+
+	if (mask != IIO_CHAN_INFO_SCALE)
+		return -EINVAL;
+
+	if (unlikely(data->ohm > INT_MAX))
+		return -ERANGE;
+
+	*val = data->ohm;
+	*val2 = MAX5432_MAX_POS;
+
+	return IIO_VAL_FRACTIONAL;
+}
+
+static int max5432_write_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int val, int val2, long mask)
+{
+	struct max5432_data *data = iio_priv(indio_dev);
+	u8 data_byte;
+
+	if (mask != IIO_CHAN_INFO_RAW)
+		return -EINVAL;
+
+	if (val < 0 || val > MAX5432_MAX_POS)
+		return -EINVAL;
+
+	if (val2 != 0)
+		return -EINVAL;
+
+	/* Wiper position is in bits D7-D3. (D2-D0 are don't care bits.) */
+	data_byte = val << 3;
+	return i2c_smbus_write_byte_data(
+			data->client, chan->address, data_byte);
+}
+
+static const struct iio_info max5432_info = {
+	.read_raw = max5432_read_raw,
+	.write_raw = max5432_write_raw,
+};
+
+static int max5432_probe(
+		struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct iio_dev *indio_dev;
+	struct max5432_data *data;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(struct max5432_data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, indio_dev);
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	data->ohm = (unsigned long)of_device_get_match_data(dev);
+
+	indio_dev->dev.parent = dev;
+	indio_dev->info = &max5432_info;
+	indio_dev->channels = max5432_channels;
+	indio_dev->num_channels = ARRAY_SIZE(max5432_channels);
+	indio_dev->name = client->name;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct of_device_id max5432_dt_ids[] = {
+	{ .compatible = "maxim,max5432", .data = (void *)MAX5432_OHM_50K  },
+	{ .compatible = "maxim,max5433", .data = (void *)MAX5432_OHM_100K },
+	{ .compatible = "maxim,max5434", .data = (void *)MAX5432_OHM_50K  },
+	{ .compatible = "maxim,max5435", .data = (void *)MAX5432_OHM_100K },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, max5432_dt_ids);
+
+static struct i2c_driver max5432_driver = {
+	.driver = {
+		.name = "max5432",
+		.of_match_table = of_match_ptr(max5432_dt_ids),
+	},
+	.probe = max5432_probe,
+};
+
+module_i2c_driver(max5432_driver);
+
+MODULE_AUTHOR("Martin Kaiser <martin@kaiser.cx>");
+MODULE_DESCRIPTION("max5432-max5435 digital potentiometers");
+MODULE_LICENSE("GPL v2");
-- 
2.11.0


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v2] iio: potentiometer: add a driver for Maxim 5432-5435
  2019-07-23  8:53 ` [PATCH v2] " Martin Kaiser
@ 2019-07-27 20:45   ` Jonathan Cameron
  0 siblings, 0 replies; 13+ messages in thread
From: Jonathan Cameron @ 2019-07-27 20:45 UTC (permalink / raw)
  To: Martin Kaiser
  Cc: Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler,
	Rob Herring, linux-iio, devicetree, linux-kernel

On Tue, 23 Jul 2019 10:53:24 +0200
Martin Kaiser <martin@kaiser.cx> wrote:

> Add a driver for the Maxim Integrated MAX5432-MAX5435 family of digital
> potentiometers.
> 
> These potentiometers are connected via I2C and have 32 wiper positions.
> 
> Supported functionality
> - set the volatile wiper position
> - read the potentiometer scale
> 
> Datasheet:
> https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf
> 
> Signed-off-by: Martin Kaiser <martin@kaiser.cx>

A few trivials and I'm afraid you posted after I'd made the decision to only
accept new DT bindings for IIO in yaml format.  

Thanks,

Jonathan

> ---
> changes in v2
>  - use MAX5432_ prefix for all defines
>  - fix indentation
>  - convert void * to unsigned long, not to u32
>    (warning from kbuild test robot)
> 
>  .../bindings/iio/potentiometer/max5432.txt         |  21 ++++
>  drivers/iio/potentiometer/Kconfig                  |  11 ++
>  drivers/iio/potentiometer/Makefile                 |   1 +
>  drivers/iio/potentiometer/max5432.c                | 135 +++++++++++++++++++++
>  4 files changed, 168 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/max5432.txt
>  create mode 100644 drivers/iio/potentiometer/max5432.c
> 
> diff --git a/Documentation/devicetree/bindings/iio/potentiometer/max5432.txt b/Documentation/devicetree/bindings/iio/potentiometer/max5432.txt
> new file mode 100644
> index 000000000000..6c6ce85e4c85
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/potentiometer/max5432.txt

We have made the move to yaml for all new IIO related bindings.
Please convert this one over.  Also, all bindings should be in
separate patches and CC the devicetree binding maintainers and list.
This just makes them easier for them to pick out and review - shouldn't
be a problem here given it's really simple :)

> @@ -0,0 +1,21 @@
> +* Maxim Integrated MAX5432-MAX5435 Digital Potentiometers.
> +
> +The node for this driver must be a child node of an I2C controller, hence
> +all mandatory properties for your controller must be specified. See directory:
> +
> +    Documentation/devicetree/bindings/i2c
> +
> +for more details.
> +
> +Required properties:
> +- compatible: Must be one of the following, depending on the model:
> +    "maxim,max5432"
> +    "maxim,max5433"
> +    "maxim,max5434"
> +    "maxim,max5435"
> +
> +Example:
> +max5434@28 {
> +	compatible = "maxim,max5434";
> +	reg = <0x28>;
> +};
> diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
> index ebc7c72a5e36..4cac0173db8b 100644
> --- a/drivers/iio/potentiometer/Kconfig
> +++ b/drivers/iio/potentiometer/Kconfig
> @@ -26,6 +26,17 @@ config DS1803
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called ds1803.
>  
> +config MAX5432
> +	tristate "Maxim MAX5432-MAX5435 Digital Potentiometer driver"
> +	depends on I2C
> +	help
> +	  Say yes here to build support for the Maxim
> +	  MAX5432, MAX5433, MAX5434 and MAX5435 digital
> +	  potentiometer chips.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called max5432.
> +
>  config MAX5481
>  	tristate "Maxim MAX5481-MAX5484 Digital Potentiometer driver"
>  	depends on SPI
> diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile
> index 8ff55138cf12..091adf3cdd0b 100644
> --- a/drivers/iio/potentiometer/Makefile
> +++ b/drivers/iio/potentiometer/Makefile
> @@ -6,6 +6,7 @@
>  # When adding new entries keep the list in alphabetical order
>  obj-$(CONFIG_AD5272) += ad5272.o
>  obj-$(CONFIG_DS1803) += ds1803.o
> +obj-$(CONFIG_MAX5432) += max5432.o
>  obj-$(CONFIG_MAX5481) += max5481.o
>  obj-$(CONFIG_MAX5487) += max5487.o
>  obj-$(CONFIG_MCP4018) += mcp4018.o
> diff --git a/drivers/iio/potentiometer/max5432.c b/drivers/iio/potentiometer/max5432.c
> new file mode 100644
> index 000000000000..95251e7c0c34
> --- /dev/null
> +++ b/drivers/iio/potentiometer/max5432.c
> @@ -0,0 +1,135 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Maxim Integrated MAX5432-MAX5435 digital potentiometer driver
> + * Copyright (C) 2019 Martin Kaiser <martin@kaiser.cx>
> + *
> + * Datasheet:
> + * https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/iio/iio.h>
> +#include <linux/limits.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +
> +/* All chip variants have 32 wiper positions. */
> +#define MAX5432_MAX_POS 31
> +
> +#define MAX5432_OHM_50K   (50  * 1000)
> +#define MAX5432_OHM_100K  (100 * 1000)
> +
> +/* Update the volatile (currently active) setting. */
> +#define MAX5432_CMD_VREG  0x11
> +
> +struct max5432_data {
> +	struct i2c_client *client;
> +	unsigned long ohm;
> +};
> +
> +static const struct iio_chan_spec max5432_channels[] = {
> +	{
> +		.type = IIO_RESISTANCE,
> +		.indexed = 1,
> +		.output = 1,
> +		.channel = 0,
> +		.address = MAX5432_CMD_VREG,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> +		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
> +	}
> +};
> +
> +static int max5432_read_raw(struct iio_dev *indio_dev,
> +			struct iio_chan_spec const *chan,
> +			int *val, int *val2, long mask)
> +{
> +	struct max5432_data *data = iio_priv(indio_dev);
> +
> +	if (mask != IIO_CHAN_INFO_SCALE)
> +		return -EINVAL;
> +
> +	if (unlikely(data->ohm > INT_MAX))
> +		return -ERANGE;
> +
> +	*val = data->ohm;
> +	*val2 = MAX5432_MAX_POS;
> +
> +	return IIO_VAL_FRACTIONAL;
> +}
> +
> +static int max5432_write_raw(struct iio_dev *indio_dev,
> +			struct iio_chan_spec const *chan,
> +			int val, int val2, long mask)
> +{
> +	struct max5432_data *data = iio_priv(indio_dev);
> +	u8 data_byte;
> +
> +	if (mask != IIO_CHAN_INFO_RAW)
> +		return -EINVAL;
> +
> +	if (val < 0 || val > MAX5432_MAX_POS)
> +		return -EINVAL;
> +
> +	if (val2 != 0)
> +		return -EINVAL;
> +
> +	/* Wiper position is in bits D7-D3. (D2-D0 are don't care bits.) */
> +	data_byte = val << 3;
> +	return i2c_smbus_write_byte_data(
> +			data->client, chan->address, data_byte);

As below, break after "address," rather than the bracket.

> +}
> +
> +static const struct iio_info max5432_info = {
> +	.read_raw = max5432_read_raw,
> +	.write_raw = max5432_write_raw,
> +};
> +
> +static int max5432_probe(
> +		struct i2c_client *client, const struct i2c_device_id *id)

That formatting is rather non standard for kernel code.
I would break the line after "client," as it will still be well under 80
chars.

> +{
> +	struct device *dev = &client->dev;
> +	struct iio_dev *indio_dev;
> +	struct max5432_data *data;
> +
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(struct max5432_data));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	i2c_set_clientdata(client, indio_dev);
> +
> +	data = iio_priv(indio_dev);
> +	data->client = client;
> +	data->ohm = (unsigned long)of_device_get_match_data(dev);
> +
> +	indio_dev->dev.parent = dev;
> +	indio_dev->info = &max5432_info;
> +	indio_dev->channels = max5432_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(max5432_channels);
> +	indio_dev->name = client->name;
> +
> +	return devm_iio_device_register(dev, indio_dev);
> +}
> +
> +static const struct of_device_id max5432_dt_ids[] = {
> +	{ .compatible = "maxim,max5432", .data = (void *)MAX5432_OHM_50K  },
> +	{ .compatible = "maxim,max5433", .data = (void *)MAX5432_OHM_100K },
> +	{ .compatible = "maxim,max5434", .data = (void *)MAX5432_OHM_50K  },
> +	{ .compatible = "maxim,max5435", .data = (void *)MAX5432_OHM_100K },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, max5432_dt_ids);
> +
> +static struct i2c_driver max5432_driver = {
> +	.driver = {
> +		.name = "max5432",
> +		.of_match_table = of_match_ptr(max5432_dt_ids),
> +	},
> +	.probe = max5432_probe,
> +};
> +
> +module_i2c_driver(max5432_driver);
> +
> +MODULE_AUTHOR("Martin Kaiser <martin@kaiser.cx>");
> +MODULE_DESCRIPTION("max5432-max5435 digital potentiometers");
> +MODULE_LICENSE("GPL v2");


^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v3 1/2] iio: potentiometer: add a driver for Maxim 5432-5435
  2019-07-21 17:59 [PATCH] iio: potentiometer: add a driver for Maxim 5432-5435 Martin Kaiser
                   ` (2 preceding siblings ...)
  2019-07-23  8:53 ` [PATCH v2] " Martin Kaiser
@ 2019-07-29 11:45 ` " Martin Kaiser
  2019-07-29 11:45   ` [PATCH v3 2/2] dt-bindings: iio: potentiometer: add max5432.yaml binding Martin Kaiser
  2019-07-31 14:07 ` [PATCH v4 1/2] iio: potentiometer: add a driver for Maxim 5432-5435 Martin Kaiser
  4 siblings, 1 reply; 13+ messages in thread
From: Martin Kaiser @ 2019-07-29 11:45 UTC (permalink / raw)
  To: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen, Rob Herring
  Cc: linux-iio, devicetree, linux-kernel, Martin Kaiser

Add a driver for the Maxim Integrated MAX5432-MAX5435 family of digital
potentiometers.

These potentiometers are connected via I2C and have 32 wiper
positions.

Supported functionality
- set the volatile wiper position
- read the potentiometer scale

Datasheet:
https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
changes in v3
 - split dt bindings and driver code into separate patches
 - use yaml format for dt bindings
 - fix formatting of parameter lists

changes in v2
 - use MAX5432_ prefix for all defines
 - fix indentation
 - convert void * to unsigned long, not to u32
   (warning from kbuild test robot)

 drivers/iio/potentiometer/Kconfig   |  11 +++
 drivers/iio/potentiometer/Makefile  |   1 +
 drivers/iio/potentiometer/max5432.c | 135 ++++++++++++++++++++++++++++++++++++
 3 files changed, 147 insertions(+)
 create mode 100644 drivers/iio/potentiometer/max5432.c

diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
index ebc7c72a5e36..4cac0173db8b 100644
--- a/drivers/iio/potentiometer/Kconfig
+++ b/drivers/iio/potentiometer/Kconfig
@@ -26,6 +26,17 @@ config DS1803
 	  To compile this driver as a module, choose M here: the
 	  module will be called ds1803.
 
+config MAX5432
+	tristate "Maxim MAX5432-MAX5435 Digital Potentiometer driver"
+	depends on I2C
+	help
+	  Say yes here to build support for the Maxim
+	  MAX5432, MAX5433, MAX5434 and MAX5435 digital
+	  potentiometer chips.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called max5432.
+
 config MAX5481
 	tristate "Maxim MAX5481-MAX5484 Digital Potentiometer driver"
 	depends on SPI
diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile
index 8ff55138cf12..091adf3cdd0b 100644
--- a/drivers/iio/potentiometer/Makefile
+++ b/drivers/iio/potentiometer/Makefile
@@ -6,6 +6,7 @@
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AD5272) += ad5272.o
 obj-$(CONFIG_DS1803) += ds1803.o
+obj-$(CONFIG_MAX5432) += max5432.o
 obj-$(CONFIG_MAX5481) += max5481.o
 obj-$(CONFIG_MAX5487) += max5487.o
 obj-$(CONFIG_MCP4018) += mcp4018.o
diff --git a/drivers/iio/potentiometer/max5432.c b/drivers/iio/potentiometer/max5432.c
new file mode 100644
index 000000000000..641b1821fdf6
--- /dev/null
+++ b/drivers/iio/potentiometer/max5432.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Maxim Integrated MAX5432-MAX5435 digital potentiometer driver
+ * Copyright (C) 2019 Martin Kaiser <martin@kaiser.cx>
+ *
+ * Datasheet:
+ * https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf
+ */
+
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+/* All chip variants have 32 wiper positions. */
+#define MAX5432_MAX_POS 31
+
+#define MAX5432_OHM_50K   (50  * 1000)
+#define MAX5432_OHM_100K  (100 * 1000)
+
+/* Update the volatile (currently active) setting. */
+#define MAX5432_CMD_VREG  0x11
+
+struct max5432_data {
+	struct i2c_client *client;
+	unsigned long ohm;
+};
+
+static const struct iio_chan_spec max5432_channels[] = {
+	{
+		.type = IIO_RESISTANCE,
+		.indexed = 1,
+		.output = 1,
+		.channel = 0,
+		.address = MAX5432_CMD_VREG,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+	}
+};
+
+static int max5432_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int *val, int *val2, long mask)
+{
+	struct max5432_data *data = iio_priv(indio_dev);
+
+	if (mask != IIO_CHAN_INFO_SCALE)
+		return -EINVAL;
+
+	if (unlikely(data->ohm > INT_MAX))
+		return -ERANGE;
+
+	*val = data->ohm;
+	*val2 = MAX5432_MAX_POS;
+
+	return IIO_VAL_FRACTIONAL;
+}
+
+static int max5432_write_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int val, int val2, long mask)
+{
+	struct max5432_data *data = iio_priv(indio_dev);
+	u8 data_byte;
+
+	if (mask != IIO_CHAN_INFO_RAW)
+		return -EINVAL;
+
+	if (val < 0 || val > MAX5432_MAX_POS)
+		return -EINVAL;
+
+	if (val2 != 0)
+		return -EINVAL;
+
+	/* Wiper position is in bits D7-D3. (D2-D0 are don't care bits.) */
+	data_byte = val << 3;
+	return i2c_smbus_write_byte_data(data->client, chan->address,
+			data_byte);
+}
+
+static const struct iio_info max5432_info = {
+	.read_raw = max5432_read_raw,
+	.write_raw = max5432_write_raw,
+};
+
+static int max5432_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct iio_dev *indio_dev;
+	struct max5432_data *data;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(struct max5432_data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, indio_dev);
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	data->ohm = (unsigned long)of_device_get_match_data(dev);
+
+	indio_dev->dev.parent = dev;
+	indio_dev->info = &max5432_info;
+	indio_dev->channels = max5432_channels;
+	indio_dev->num_channels = ARRAY_SIZE(max5432_channels);
+	indio_dev->name = client->name;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct of_device_id max5432_dt_ids[] = {
+	{ .compatible = "maxim,max5432", .data = (void *)MAX5432_OHM_50K  },
+	{ .compatible = "maxim,max5433", .data = (void *)MAX5432_OHM_100K },
+	{ .compatible = "maxim,max5434", .data = (void *)MAX5432_OHM_50K  },
+	{ .compatible = "maxim,max5435", .data = (void *)MAX5432_OHM_100K },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, max5432_dt_ids);
+
+static struct i2c_driver max5432_driver = {
+	.driver = {
+		.name = "max5432",
+		.of_match_table = of_match_ptr(max5432_dt_ids),
+	},
+	.probe = max5432_probe,
+};
+
+module_i2c_driver(max5432_driver);
+
+MODULE_AUTHOR("Martin Kaiser <martin@kaiser.cx>");
+MODULE_DESCRIPTION("max5432-max5435 digital potentiometers");
+MODULE_LICENSE("GPL v2");
-- 
2.11.0


^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v3 2/2] dt-bindings: iio: potentiometer: add max5432.yaml binding
  2019-07-29 11:45 ` [PATCH v3 1/2] " Martin Kaiser
@ 2019-07-29 11:45   ` Martin Kaiser
  2019-07-29 23:43     ` Rob Herring
  0 siblings, 1 reply; 13+ messages in thread
From: Martin Kaiser @ 2019-07-29 11:45 UTC (permalink / raw)
  To: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen, Rob Herring
  Cc: linux-iio, devicetree, linux-kernel, Martin Kaiser

Add a binding for the Maxim Integrated MAX5432-MAX5435 family of digital
potentiometers.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
changes in v3
 - split dt bindings and driver code into separate patches
 - use yaml format for dt bindings
 - fix formatting of parameter lists

changes in v2
 - use MAX5432_ prefix for all defines
 - fix indentation
 - convert void * to unsigned long, not to u32
   (warning from kbuild test robot)

 .../bindings/iio/potentiometer/max5432.yaml        | 35 ++++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml

diff --git a/Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml b/Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml
new file mode 100644
index 000000000000..448781b80f39
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/potentiometer/max5432.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX5432-MAX5435 Digital Potentiometers
+
+maintainers:
+  - Martin Kaiser <martin@kaiser.cx>
+
+description: |
+  Maxim Integrated MAX5432-MAX5435 Digital Potentiometers connected via I2C
+
+  Datasheet:
+    https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max5432
+      - maxim,max5433
+      - maxim,max5434
+      - maxim,max5435
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      max5434@28 {
+        compatible = "maxim,max5434";
+        reg = <0x28>;
+      };
+    };
-- 
2.11.0


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v3 2/2] dt-bindings: iio: potentiometer: add max5432.yaml binding
  2019-07-29 11:45   ` [PATCH v3 2/2] dt-bindings: iio: potentiometer: add max5432.yaml binding Martin Kaiser
@ 2019-07-29 23:43     ` Rob Herring
  0 siblings, 0 replies; 13+ messages in thread
From: Rob Herring @ 2019-07-29 23:43 UTC (permalink / raw)
  To: Martin Kaiser
  Cc: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen,
	open list:IIO SUBSYSTEM AND DRIVERS, devicetree, linux-kernel

On Mon, Jul 29, 2019 at 5:46 AM Martin Kaiser <martin@kaiser.cx> wrote:
>
> Add a binding for the Maxim Integrated MAX5432-MAX5435 family of digital
> potentiometers.
>
> Signed-off-by: Martin Kaiser <martin@kaiser.cx>
> ---
> changes in v3
>  - split dt bindings and driver code into separate patches
>  - use yaml format for dt bindings
>  - fix formatting of parameter lists
>
> changes in v2
>  - use MAX5432_ prefix for all defines
>  - fix indentation
>  - convert void * to unsigned long, not to u32
>    (warning from kbuild test robot)
>
>  .../bindings/iio/potentiometer/max5432.yaml        | 35 ++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml b/Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml
> new file mode 100644
> index 000000000000..448781b80f39
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml
> @@ -0,0 +1,35 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/potentiometer/max5432.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Maxim Integrated MAX5432-MAX5435 Digital Potentiometers
> +
> +maintainers:
> +  - Martin Kaiser <martin@kaiser.cx>
> +
> +description: |
> +  Maxim Integrated MAX5432-MAX5435 Digital Potentiometers connected via I2C
> +
> +  Datasheet:
> +    https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - maxim,max5432
> +      - maxim,max5433
> +      - maxim,max5434
> +      - maxim,max5435
> +

reg?

Also, add an 'additionalProperties: false' line. This means other
properties can't be present (except 'status' and a few we
automatically add).

> +examples:
> +  - |
> +    i2c0 {

i2c {

> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      max5434@28 {
> +        compatible = "maxim,max5434";
> +        reg = <0x28>;
> +      };
> +    };
> --
> 2.11.0
>

^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v4 1/2] iio: potentiometer: add a driver for Maxim 5432-5435
  2019-07-21 17:59 [PATCH] iio: potentiometer: add a driver for Maxim 5432-5435 Martin Kaiser
                   ` (3 preceding siblings ...)
  2019-07-29 11:45 ` [PATCH v3 1/2] " Martin Kaiser
@ 2019-07-31 14:07 ` Martin Kaiser
  2019-07-31 14:07   ` [PATCH v4 2/2] dt-bindings: iio: potentiometer: add max5432.yaml binding Martin Kaiser
  2019-08-05 13:30   ` [PATCH v4 1/2] iio: potentiometer: add a driver for Maxim 5432-5435 Jonathan Cameron
  4 siblings, 2 replies; 13+ messages in thread
From: Martin Kaiser @ 2019-07-31 14:07 UTC (permalink / raw)
  To: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen, Rob Herring
  Cc: linux-iio, devicetree, linux-kernel, Martin Kaiser

Add a driver for the Maxim Integrated MAX5432-MAX5435 family of digital
potentiometers.

These potentiometers are connected via I2C and have 32 wiper
positions.

Supported functionality
- set the volatile wiper position
- read the potentiometer scale

Datasheet:
https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
changes in v4
 - fix the dt bindings
   - replace ic20 with i2c
   - document the reg property
   - add additionalProperties and required

changes in v3
 - split dt bindings and driver code into separate patches
 - use yaml format for dt bindings
 - fix formatting of parameter lists

changes in v2
 - use MAX5432_ prefix for all defines
 - fix indentation
 - convert void * to unsigned long, not to u32
   (warning from kbuild test robot)

 drivers/iio/potentiometer/Kconfig   |  11 +++
 drivers/iio/potentiometer/Makefile  |   1 +
 drivers/iio/potentiometer/max5432.c | 135 ++++++++++++++++++++++++++++++++++++
 3 files changed, 147 insertions(+)
 create mode 100644 drivers/iio/potentiometer/max5432.c

diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
index ebc7c72a5e36..4cac0173db8b 100644
--- a/drivers/iio/potentiometer/Kconfig
+++ b/drivers/iio/potentiometer/Kconfig
@@ -26,6 +26,17 @@ config DS1803
 	  To compile this driver as a module, choose M here: the
 	  module will be called ds1803.
 
+config MAX5432
+	tristate "Maxim MAX5432-MAX5435 Digital Potentiometer driver"
+	depends on I2C
+	help
+	  Say yes here to build support for the Maxim
+	  MAX5432, MAX5433, MAX5434 and MAX5435 digital
+	  potentiometer chips.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called max5432.
+
 config MAX5481
 	tristate "Maxim MAX5481-MAX5484 Digital Potentiometer driver"
 	depends on SPI
diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile
index 8ff55138cf12..091adf3cdd0b 100644
--- a/drivers/iio/potentiometer/Makefile
+++ b/drivers/iio/potentiometer/Makefile
@@ -6,6 +6,7 @@
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AD5272) += ad5272.o
 obj-$(CONFIG_DS1803) += ds1803.o
+obj-$(CONFIG_MAX5432) += max5432.o
 obj-$(CONFIG_MAX5481) += max5481.o
 obj-$(CONFIG_MAX5487) += max5487.o
 obj-$(CONFIG_MCP4018) += mcp4018.o
diff --git a/drivers/iio/potentiometer/max5432.c b/drivers/iio/potentiometer/max5432.c
new file mode 100644
index 000000000000..641b1821fdf6
--- /dev/null
+++ b/drivers/iio/potentiometer/max5432.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Maxim Integrated MAX5432-MAX5435 digital potentiometer driver
+ * Copyright (C) 2019 Martin Kaiser <martin@kaiser.cx>
+ *
+ * Datasheet:
+ * https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf
+ */
+
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+/* All chip variants have 32 wiper positions. */
+#define MAX5432_MAX_POS 31
+
+#define MAX5432_OHM_50K   (50  * 1000)
+#define MAX5432_OHM_100K  (100 * 1000)
+
+/* Update the volatile (currently active) setting. */
+#define MAX5432_CMD_VREG  0x11
+
+struct max5432_data {
+	struct i2c_client *client;
+	unsigned long ohm;
+};
+
+static const struct iio_chan_spec max5432_channels[] = {
+	{
+		.type = IIO_RESISTANCE,
+		.indexed = 1,
+		.output = 1,
+		.channel = 0,
+		.address = MAX5432_CMD_VREG,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+	}
+};
+
+static int max5432_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int *val, int *val2, long mask)
+{
+	struct max5432_data *data = iio_priv(indio_dev);
+
+	if (mask != IIO_CHAN_INFO_SCALE)
+		return -EINVAL;
+
+	if (unlikely(data->ohm > INT_MAX))
+		return -ERANGE;
+
+	*val = data->ohm;
+	*val2 = MAX5432_MAX_POS;
+
+	return IIO_VAL_FRACTIONAL;
+}
+
+static int max5432_write_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int val, int val2, long mask)
+{
+	struct max5432_data *data = iio_priv(indio_dev);
+	u8 data_byte;
+
+	if (mask != IIO_CHAN_INFO_RAW)
+		return -EINVAL;
+
+	if (val < 0 || val > MAX5432_MAX_POS)
+		return -EINVAL;
+
+	if (val2 != 0)
+		return -EINVAL;
+
+	/* Wiper position is in bits D7-D3. (D2-D0 are don't care bits.) */
+	data_byte = val << 3;
+	return i2c_smbus_write_byte_data(data->client, chan->address,
+			data_byte);
+}
+
+static const struct iio_info max5432_info = {
+	.read_raw = max5432_read_raw,
+	.write_raw = max5432_write_raw,
+};
+
+static int max5432_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct iio_dev *indio_dev;
+	struct max5432_data *data;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(struct max5432_data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, indio_dev);
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	data->ohm = (unsigned long)of_device_get_match_data(dev);
+
+	indio_dev->dev.parent = dev;
+	indio_dev->info = &max5432_info;
+	indio_dev->channels = max5432_channels;
+	indio_dev->num_channels = ARRAY_SIZE(max5432_channels);
+	indio_dev->name = client->name;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct of_device_id max5432_dt_ids[] = {
+	{ .compatible = "maxim,max5432", .data = (void *)MAX5432_OHM_50K  },
+	{ .compatible = "maxim,max5433", .data = (void *)MAX5432_OHM_100K },
+	{ .compatible = "maxim,max5434", .data = (void *)MAX5432_OHM_50K  },
+	{ .compatible = "maxim,max5435", .data = (void *)MAX5432_OHM_100K },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, max5432_dt_ids);
+
+static struct i2c_driver max5432_driver = {
+	.driver = {
+		.name = "max5432",
+		.of_match_table = of_match_ptr(max5432_dt_ids),
+	},
+	.probe = max5432_probe,
+};
+
+module_i2c_driver(max5432_driver);
+
+MODULE_AUTHOR("Martin Kaiser <martin@kaiser.cx>");
+MODULE_DESCRIPTION("max5432-max5435 digital potentiometers");
+MODULE_LICENSE("GPL v2");
-- 
2.11.0


^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v4 2/2] dt-bindings: iio: potentiometer: add max5432.yaml binding
  2019-07-31 14:07 ` [PATCH v4 1/2] iio: potentiometer: add a driver for Maxim 5432-5435 Martin Kaiser
@ 2019-07-31 14:07   ` Martin Kaiser
  2019-07-31 16:50     ` Rob Herring
  2019-08-05 13:30   ` [PATCH v4 1/2] iio: potentiometer: add a driver for Maxim 5432-5435 Jonathan Cameron
  1 sibling, 1 reply; 13+ messages in thread
From: Martin Kaiser @ 2019-07-31 14:07 UTC (permalink / raw)
  To: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen, Rob Herring
  Cc: linux-iio, devicetree, linux-kernel, Martin Kaiser

Add a binding for the Maxim Integrated MAX5432-MAX5435 family of digital
potentiometers.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
changes in v4
 - fix the dt bindings
   - replace ic20 with i2c
   - document the reg property
   - add additionalProperties and required

changes in v3
 - split dt bindings and driver code into separate patches
 - use yaml format for dt bindings
 - fix formatting of parameter lists

changes in v2
 - use MAX5432_ prefix for all defines
 - fix indentation
 - convert void * to unsigned long, not to u32
   (warning from kbuild test robot)

 .../bindings/iio/potentiometer/max5432.yaml        | 44 ++++++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml

diff --git a/Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml b/Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml
new file mode 100644
index 000000000000..5082f919df2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/potentiometer/max5432.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX5432-MAX5435 Digital Potentiometers
+
+maintainers:
+  - Martin Kaiser <martin@kaiser.cx>
+
+description: |
+  Maxim Integrated MAX5432-MAX5435 Digital Potentiometers connected via I2C
+
+  Datasheet:
+    https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max5432
+      - maxim,max5433
+      - maxim,max5434
+      - maxim,max5435
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      max5434@28 {
+        compatible = "maxim,max5434";
+        reg = <0x28>;
+      };
+    };
-- 
2.11.0


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v4 2/2] dt-bindings: iio: potentiometer: add max5432.yaml binding
  2019-07-31 14:07   ` [PATCH v4 2/2] dt-bindings: iio: potentiometer: add max5432.yaml binding Martin Kaiser
@ 2019-07-31 16:50     ` Rob Herring
  2019-08-05 13:32       ` Jonathan Cameron
  0 siblings, 1 reply; 13+ messages in thread
From: Rob Herring @ 2019-07-31 16:50 UTC (permalink / raw)
  To: Martin Kaiser
  Cc: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen,
	open list:IIO SUBSYSTEM AND DRIVERS, devicetree, linux-kernel

On Wed, Jul 31, 2019 at 8:07 AM Martin Kaiser <martin@kaiser.cx> wrote:
>
> Add a binding for the Maxim Integrated MAX5432-MAX5435 family of digital
> potentiometers.
>
> Signed-off-by: Martin Kaiser <martin@kaiser.cx>
> ---
> changes in v4
>  - fix the dt bindings
>    - replace ic20 with i2c
>    - document the reg property
>    - add additionalProperties and required
>
> changes in v3
>  - split dt bindings and driver code into separate patches
>  - use yaml format for dt bindings
>  - fix formatting of parameter lists
>
> changes in v2
>  - use MAX5432_ prefix for all defines
>  - fix indentation
>  - convert void * to unsigned long, not to u32
>    (warning from kbuild test robot)
>
>  .../bindings/iio/potentiometer/max5432.yaml        | 44 ++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v4 1/2] iio: potentiometer: add a driver for Maxim 5432-5435
  2019-07-31 14:07 ` [PATCH v4 1/2] iio: potentiometer: add a driver for Maxim 5432-5435 Martin Kaiser
  2019-07-31 14:07   ` [PATCH v4 2/2] dt-bindings: iio: potentiometer: add max5432.yaml binding Martin Kaiser
@ 2019-08-05 13:30   ` Jonathan Cameron
  1 sibling, 0 replies; 13+ messages in thread
From: Jonathan Cameron @ 2019-08-05 13:30 UTC (permalink / raw)
  To: Martin Kaiser
  Cc: Hartmut Knaack, Lars-Peter Clausen, Rob Herring, linux-iio,
	devicetree, linux-kernel

On Wed, 31 Jul 2019 16:07:05 +0200
Martin Kaiser <martin@kaiser.cx> wrote:

> Add a driver for the Maxim Integrated MAX5432-MAX5435 family of digital
> potentiometers.
> 
> These potentiometers are connected via I2C and have 32 wiper
> positions.
> 
> Supported functionality
> - set the volatile wiper position
> - read the potentiometer scale
> 
> Datasheet:
> https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf
> 
> Signed-off-by: Martin Kaiser <martin@kaiser.cx>

Looks good.

Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.

Thanks,

Jonathan

> ---
> changes in v4
>  - fix the dt bindings
>    - replace ic20 with i2c
>    - document the reg property
>    - add additionalProperties and required
> 
> changes in v3
>  - split dt bindings and driver code into separate patches
>  - use yaml format for dt bindings
>  - fix formatting of parameter lists
> 
> changes in v2
>  - use MAX5432_ prefix for all defines
>  - fix indentation
>  - convert void * to unsigned long, not to u32
>    (warning from kbuild test robot)
> 
>  drivers/iio/potentiometer/Kconfig   |  11 +++
>  drivers/iio/potentiometer/Makefile  |   1 +
>  drivers/iio/potentiometer/max5432.c | 135 ++++++++++++++++++++++++++++++++++++
>  3 files changed, 147 insertions(+)
>  create mode 100644 drivers/iio/potentiometer/max5432.c
> 
> diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
> index ebc7c72a5e36..4cac0173db8b 100644
> --- a/drivers/iio/potentiometer/Kconfig
> +++ b/drivers/iio/potentiometer/Kconfig
> @@ -26,6 +26,17 @@ config DS1803
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called ds1803.
>  
> +config MAX5432
> +	tristate "Maxim MAX5432-MAX5435 Digital Potentiometer driver"
> +	depends on I2C
> +	help
> +	  Say yes here to build support for the Maxim
> +	  MAX5432, MAX5433, MAX5434 and MAX5435 digital
> +	  potentiometer chips.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called max5432.
> +
>  config MAX5481
>  	tristate "Maxim MAX5481-MAX5484 Digital Potentiometer driver"
>  	depends on SPI
> diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile
> index 8ff55138cf12..091adf3cdd0b 100644
> --- a/drivers/iio/potentiometer/Makefile
> +++ b/drivers/iio/potentiometer/Makefile
> @@ -6,6 +6,7 @@
>  # When adding new entries keep the list in alphabetical order
>  obj-$(CONFIG_AD5272) += ad5272.o
>  obj-$(CONFIG_DS1803) += ds1803.o
> +obj-$(CONFIG_MAX5432) += max5432.o
>  obj-$(CONFIG_MAX5481) += max5481.o
>  obj-$(CONFIG_MAX5487) += max5487.o
>  obj-$(CONFIG_MCP4018) += mcp4018.o
> diff --git a/drivers/iio/potentiometer/max5432.c b/drivers/iio/potentiometer/max5432.c
> new file mode 100644
> index 000000000000..641b1821fdf6
> --- /dev/null
> +++ b/drivers/iio/potentiometer/max5432.c
> @@ -0,0 +1,135 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Maxim Integrated MAX5432-MAX5435 digital potentiometer driver
> + * Copyright (C) 2019 Martin Kaiser <martin@kaiser.cx>
> + *
> + * Datasheet:
> + * https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/iio/iio.h>
> +#include <linux/limits.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +
> +/* All chip variants have 32 wiper positions. */
> +#define MAX5432_MAX_POS 31
> +
> +#define MAX5432_OHM_50K   (50  * 1000)
> +#define MAX5432_OHM_100K  (100 * 1000)
> +
> +/* Update the volatile (currently active) setting. */
> +#define MAX5432_CMD_VREG  0x11
> +
> +struct max5432_data {
> +	struct i2c_client *client;
> +	unsigned long ohm;
> +};
> +
> +static const struct iio_chan_spec max5432_channels[] = {
> +	{
> +		.type = IIO_RESISTANCE,
> +		.indexed = 1,
> +		.output = 1,
> +		.channel = 0,
> +		.address = MAX5432_CMD_VREG,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> +		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
> +	}
> +};
> +
> +static int max5432_read_raw(struct iio_dev *indio_dev,
> +			struct iio_chan_spec const *chan,
> +			int *val, int *val2, long mask)
> +{
> +	struct max5432_data *data = iio_priv(indio_dev);
> +
> +	if (mask != IIO_CHAN_INFO_SCALE)
> +		return -EINVAL;
> +
> +	if (unlikely(data->ohm > INT_MAX))
> +		return -ERANGE;
> +
> +	*val = data->ohm;
> +	*val2 = MAX5432_MAX_POS;
> +
> +	return IIO_VAL_FRACTIONAL;
> +}
> +
> +static int max5432_write_raw(struct iio_dev *indio_dev,
> +			struct iio_chan_spec const *chan,
> +			int val, int val2, long mask)
> +{
> +	struct max5432_data *data = iio_priv(indio_dev);
> +	u8 data_byte;
> +
> +	if (mask != IIO_CHAN_INFO_RAW)
> +		return -EINVAL;
> +
> +	if (val < 0 || val > MAX5432_MAX_POS)
> +		return -EINVAL;
> +
> +	if (val2 != 0)
> +		return -EINVAL;
> +
> +	/* Wiper position is in bits D7-D3. (D2-D0 are don't care bits.) */
> +	data_byte = val << 3;
> +	return i2c_smbus_write_byte_data(data->client, chan->address,
> +			data_byte);
> +}
> +
> +static const struct iio_info max5432_info = {
> +	.read_raw = max5432_read_raw,
> +	.write_raw = max5432_write_raw,
> +};
> +
> +static int max5432_probe(struct i2c_client *client,
> +		const struct i2c_device_id *id)
> +{
> +	struct device *dev = &client->dev;
> +	struct iio_dev *indio_dev;
> +	struct max5432_data *data;
> +
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(struct max5432_data));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	i2c_set_clientdata(client, indio_dev);
> +
> +	data = iio_priv(indio_dev);
> +	data->client = client;
> +	data->ohm = (unsigned long)of_device_get_match_data(dev);
> +
> +	indio_dev->dev.parent = dev;
> +	indio_dev->info = &max5432_info;
> +	indio_dev->channels = max5432_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(max5432_channels);
> +	indio_dev->name = client->name;
> +
> +	return devm_iio_device_register(dev, indio_dev);
> +}
> +
> +static const struct of_device_id max5432_dt_ids[] = {
> +	{ .compatible = "maxim,max5432", .data = (void *)MAX5432_OHM_50K  },
> +	{ .compatible = "maxim,max5433", .data = (void *)MAX5432_OHM_100K },
> +	{ .compatible = "maxim,max5434", .data = (void *)MAX5432_OHM_50K  },
> +	{ .compatible = "maxim,max5435", .data = (void *)MAX5432_OHM_100K },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, max5432_dt_ids);
> +
> +static struct i2c_driver max5432_driver = {
> +	.driver = {
> +		.name = "max5432",
> +		.of_match_table = of_match_ptr(max5432_dt_ids),
> +	},
> +	.probe = max5432_probe,
> +};
> +
> +module_i2c_driver(max5432_driver);
> +
> +MODULE_AUTHOR("Martin Kaiser <martin@kaiser.cx>");
> +MODULE_DESCRIPTION("max5432-max5435 digital potentiometers");
> +MODULE_LICENSE("GPL v2");


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v4 2/2] dt-bindings: iio: potentiometer: add max5432.yaml binding
  2019-07-31 16:50     ` Rob Herring
@ 2019-08-05 13:32       ` Jonathan Cameron
  0 siblings, 0 replies; 13+ messages in thread
From: Jonathan Cameron @ 2019-08-05 13:32 UTC (permalink / raw)
  To: Rob Herring
  Cc: Martin Kaiser, Hartmut Knaack, Lars-Peter Clausen,
	open list:IIO SUBSYSTEM AND DRIVERS, devicetree, linux-kernel

On Wed, 31 Jul 2019 10:50:36 -0600
Rob Herring <robh+dt@kernel.org> wrote:

> On Wed, Jul 31, 2019 at 8:07 AM Martin Kaiser <martin@kaiser.cx> wrote:
> >
> > Add a binding for the Maxim Integrated MAX5432-MAX5435 family of digital
> > potentiometers.
> >
> > Signed-off-by: Martin Kaiser <martin@kaiser.cx>
> > ---
> > changes in v4
> >  - fix the dt bindings
> >    - replace ic20 with i2c
> >    - document the reg property
> >    - add additionalProperties and required
> >
> > changes in v3
> >  - split dt bindings and driver code into separate patches
> >  - use yaml format for dt bindings
> >  - fix formatting of parameter lists
> >
> > changes in v2
> >  - use MAX5432_ prefix for all defines
> >  - fix indentation
> >  - convert void * to unsigned long, not to u32
> >    (warning from kbuild test robot)
> >
> >  .../bindings/iio/potentiometer/max5432.yaml        | 44 ++++++++++++++++++++++
> >  1 file changed, 44 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml  
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
Applied to the togreg branch of iio.git and pushed out as testing for the
autobuilders to play with it.

Thanks,

Jonathan



^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, back to index

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-21 17:59 [PATCH] iio: potentiometer: add a driver for Maxim 5432-5435 Martin Kaiser
2019-07-21 20:48 ` Peter Meerwald-Stadler
2019-07-22 20:13 ` kbuild test robot
2019-07-23  8:53 ` [PATCH v2] " Martin Kaiser
2019-07-27 20:45   ` Jonathan Cameron
2019-07-29 11:45 ` [PATCH v3 1/2] " Martin Kaiser
2019-07-29 11:45   ` [PATCH v3 2/2] dt-bindings: iio: potentiometer: add max5432.yaml binding Martin Kaiser
2019-07-29 23:43     ` Rob Herring
2019-07-31 14:07 ` [PATCH v4 1/2] iio: potentiometer: add a driver for Maxim 5432-5435 Martin Kaiser
2019-07-31 14:07   ` [PATCH v4 2/2] dt-bindings: iio: potentiometer: add max5432.yaml binding Martin Kaiser
2019-07-31 16:50     ` Rob Herring
2019-08-05 13:32       ` Jonathan Cameron
2019-08-05 13:30   ` [PATCH v4 1/2] iio: potentiometer: add a driver for Maxim 5432-5435 Jonathan Cameron

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org linux-iio@archiver.kernel.org
	public-inbox-index linux-iio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/ public-inbox