From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.8 required=3.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS, URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 354D0C7618B for ; Thu, 25 Jul 2019 05:32:37 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 0F6F72190F for ; Thu, 25 Jul 2019 05:32:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2403841AbfGYFc0 (ORCPT ); Thu, 25 Jul 2019 01:32:26 -0400 Received: from comms.puri.sm ([159.203.221.185]:59566 "EHLO comms.puri.sm" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2403827AbfGYFc0 (ORCPT ); Thu, 25 Jul 2019 01:32:26 -0400 Received: from localhost (localhost [127.0.0.1]) by comms.puri.sm (Postfix) with ESMTP id 33810E0496; Wed, 24 Jul 2019 22:32:24 -0700 (PDT) Received: from comms.puri.sm ([127.0.0.1]) by localhost (comms.puri.sm [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id IkkQiEiP6mV5; Wed, 24 Jul 2019 22:32:23 -0700 (PDT) From: Martin Kepplinger To: lorenzo.bianconi83@gmail.com, jic23@kernel.org, knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Martin Kepplinger Subject: [PATCH v3 4/5] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1 Date: Thu, 25 Jul 2019 07:31:31 +0200 Message-Id: <20190725053132.9589-5-martin.kepplinger@puri.sm> In-Reply-To: <20190725053132.9589-1-martin.kepplinger@puri.sm> References: <20190725053132.9589-1-martin.kepplinger@puri.sm> Content-Transfer-Encoding: 8bit Sender: linux-iio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org The LSM9DS1's accelerometer / gyroscope unit and it's magnetometer (separately supported in iio/magnetometer/st_magn*) are located on a separate i2c addresses on the bus. For the datasheet, see https://www.st.com/resource/en/datasheet/lsm9ds1.pdf Treat it just like the LSM6* devices and, despite it's name, hook it up to the st_lsm6dsx driver, using it's basic functionality. Signed-off-by: Martin Kepplinger --- drivers/iio/imu/st_lsm6dsx/Kconfig | 1 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 94 +++++++++++++++++++- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 ++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 ++ 5 files changed, 104 insertions(+), 3 deletions(-) diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig index 2d8b2e1edfce..4a57bfb3c12e 100644 --- a/drivers/iio/imu/st_lsm6dsx/Kconfig +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig @@ -11,6 +11,7 @@ config IIO_ST_LSM6DSX Say yes here to build support for STMicroelectronics LSM6DSx imu sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr, lsm6ds3tr-c + and the accelerometer/gyroscope of lsm9ds1. To compile this driver as a module, choose M here: the module will be called st_lsm6dsx. diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index 3c47f5d27d30..9a30cc717de2 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -23,6 +23,7 @@ #define ST_LSM6DSOX_DEV_NAME "lsm6dsox" #define ST_LSM6DSR_DEV_NAME "lsm6dsr" #define ST_LSM6DS3TRC_DEV_NAME "lsm6ds3tr-c" +#define ST_LSM9DS1_DEV_NAME "lsm9ds1" enum st_lsm6dsx_hw_id { ST_LSM6DS3_ID, @@ -35,6 +36,7 @@ enum st_lsm6dsx_hw_id { ST_LSM6DSOX_ID, ST_LSM6DSR_ID, ST_LSM6DS3TRC_ID, + ST_LSM9DS1_ID, ST_LSM6DSX_MAX_ID, }; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index e0d2149625cc..2f3d2bf25646 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -10,6 +10,8 @@ * +-125/+-245/+-500/+-1000/+-2000 dps * LSM6DSx series has an integrated First-In-First-Out (FIFO) buffer * allowing dynamic batching of sensor data. + * LSM9DSx series is similar but includes an additional magnetometer, handled + * by a different driver. * * Supported sensors: * - LSM6DS3: @@ -30,6 +32,13 @@ * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 * - FIFO size: 3KB * + * - LSM9DS1: + * - Accelerometer supported ODR [Hz]: 10, 50, 119, 238, 476, 952 + * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 + * - Gyroscope supported ODR [Hz]: 15, 60, 119, 238, 476, 952 + * - Gyroscope supported full-scale [dps]: +-245/+-500/+-2000 + * - FIFO size: 32 + * * Copyright 2016 STMicroelectronics Inc. * * Lorenzo Bianconi @@ -64,7 +73,72 @@ #define ST_LSM6DSX_REG_GYRO_OUT_Y_L_ADDR 0x24 #define ST_LSM6DSX_REG_GYRO_OUT_Z_L_ADDR 0x26 +#define ST_LSM9DSX_REG_GYRO_OUT_X_L_ADDR 0x18 +#define ST_LSM9DSX_REG_GYRO_OUT_Y_L_ADDR 0x1a +#define ST_LSM9DSX_REG_GYRO_OUT_Z_L_ADDR 0x1c + static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { + { + .wai = 0x68, + .int1_addr = 0x0c, + .int2_addr = 0x0d, + .reset_addr = 0x22, + .max_fifo_size = 32, + .id = { + { + .hw_id = ST_LSM9DS1_ID, + .name = ST_LSM9DS1_DEV_NAME, + }, + }, + .odr_table = { + [ST_LSM6DSX_ID_ACC] = { + .reg = { + .addr = 0x20, + .mask = GENMASK(7, 5), + }, + .odr_avl[0] = { 10, 0x01 }, + .odr_avl[1] = { 50, 0x02 }, + .odr_avl[2] = { 119, 0x03 }, + .odr_avl[3] = { 238, 0x04 }, + .odr_avl[4] = { 476, 0x05 }, + .odr_avl[5] = { 952, 0x06 }, + }, + [ST_LSM6DSX_ID_GYRO] = { + .reg = { + .addr = 0x10, + .mask = GENMASK(7, 5), + }, + .odr_avl[0] = { 15, 0x01 }, + .odr_avl[1] = { 60, 0x02 }, + .odr_avl[2] = { 119, 0x03 }, + .odr_avl[3] = { 238, 0x04 }, + .odr_avl[4] = { 476, 0x05 }, + .odr_avl[5] = { 952, 0x06 }, + }, + }, + .fs_table = { + [ST_LSM6DSX_ID_ACC] = { + .reg = { + .addr = 0x20, + .mask = GENMASK(4, 3), + }, + .fs_avl[0] = { 599, 0x0 }, + .fs_avl[1] = { 1197, 0x2 }, + .fs_avl[2] = { 2394, 0x3 }, + .fs_avl[3] = { 4788, 0x1 }, + }, + [ST_LSM6DSX_ID_GYRO] = { + .reg = { + .addr = 0x10, + .mask = GENMASK(4, 3), + }, + .fs_avl[0] = { IIO_DEGREE_TO_RAD(245), 0x0 }, + .fs_avl[1] = { IIO_DEGREE_TO_RAD(500), 0x1 }, + .fs_avl[2] = { IIO_DEGREE_TO_RAD(0), 0x2 }, + .fs_avl[3] = { IIO_DEGREE_TO_RAD(2000), 0x3 }, + }, + }, + }, { .wai = 0x69, .int1_addr = 0x0d, @@ -733,6 +807,16 @@ static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = { IIO_CHAN_SOFT_TIMESTAMP(3), }; +static const struct iio_chan_spec st_lsm9dsx_gyro_channels[] = { + ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM9DSX_REG_GYRO_OUT_X_L_ADDR, + IIO_MOD_X, 0), + ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM9DSX_REG_GYRO_OUT_Y_L_ADDR, + IIO_MOD_Y, 1), + ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM9DSX_REG_GYRO_OUT_Z_L_ADDR, + IIO_MOD_Z, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable) { const struct st_lsm6dsx_shub_settings *hub_settings; @@ -1278,7 +1362,7 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw) static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw, enum st_lsm6dsx_sensor_id id, - const char *name) + const char *name, int hw_id) { struct st_lsm6dsx_sensor *sensor; struct iio_dev *iio_dev; @@ -1308,7 +1392,11 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw, name); break; case ST_LSM6DSX_ID_GYRO: - iio_dev->channels = st_lsm6dsx_gyro_channels; + if (hw_id == ST_LSM9DS1_ID) + iio_dev->channels = st_lsm9dsx_gyro_channels; + else + iio_dev->channels = st_lsm6dsx_gyro_channels; + iio_dev->num_channels = ARRAY_SIZE(st_lsm6dsx_gyro_channels); iio_dev->info = &st_lsm6dsx_gyro_info; @@ -1354,7 +1442,7 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, return err; for (i = 0; i < ST_LSM6DSX_ID_EXT0; i++) { - hw->iio_devs[i] = st_lsm6dsx_alloc_iiodev(hw, i, name); + hw->iio_devs[i] = st_lsm6dsx_alloc_iiodev(hw, i, name, hw_id); if (!hw->iio_devs[i]) return -ENOMEM; } diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c index 28581eb0532c..c36a057c36ee 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c @@ -79,6 +79,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = { .compatible = "st,lsm6ds3tr-c", .data = (void *)ST_LSM6DS3TRC_ID, }, + { + .compatible = "st,lsm9ds1", + .data = (void *)ST_LSM9DS1_ID, + }, {}, }; MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match); @@ -94,6 +98,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = { { ST_LSM6DSOX_DEV_NAME, ST_LSM6DSOX_ID }, { ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID }, { ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID }, + { ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID }, {}, }; MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table); diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c index 0371e8b94a3e..138e3b985865 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c @@ -79,6 +79,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = { .compatible = "st,lsm6ds3tr-c", .data = (void *)ST_LSM6DS3TRC_ID, }, + { + .compatible = "st,lsm9ds1", + .data = (void *)ST_LSM9DS1_ID, + }, {}, }; MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match); @@ -94,6 +98,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = { { ST_LSM6DSOX_DEV_NAME, ST_LSM6DSOX_ID }, { ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID }, { ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID }, + { ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID }, {}, }; MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table); -- 2.20.1