Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
From: Sean Nyekjaer <sean@geanix.com>
To: linux-iio@vger.kernel.org, jic23@kernel.org,
	lorenzo.bianconi83@gmail.com
Cc: Sean Nyekjaer <sean@geanix.com>,
	denis.ciocca@st.com, mario.tesi@st.com, armando.visconti@st.com,
	martin@geanix.com, Lorenzo Bianconi <lorenzo@kernel.org>
Subject: [PATCH v8 1/5] iio: imu: st_lsm6dsx: move interrupt thread to core
Date: Fri, 13 Sep 2019 11:07:04 +0200
Message-ID: <20190913090708.1442057-2-sean@geanix.com> (raw)
In-Reply-To: <20190913090708.1442057-1-sean@geanix.com>

This prepares the interrupt to be used for other stuff than
fifo reading + event readings.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 .../iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c    | 78 +---------------
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c  | 88 +++++++++++++++++++
 2 files changed, 89 insertions(+), 77 deletions(-)

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index b0f3da1976e4..ef579650fd52 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -30,8 +30,6 @@
  * Denis Ciocca <denis.ciocca@st.com>
  */
 #include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/iio/kfifo_buf.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
@@ -42,10 +40,6 @@
 
 #include "st_lsm6dsx.h"
 
-#define ST_LSM6DSX_REG_HLACTIVE_ADDR		0x12
-#define ST_LSM6DSX_REG_HLACTIVE_MASK		BIT(5)
-#define ST_LSM6DSX_REG_PP_OD_ADDR		0x12
-#define ST_LSM6DSX_REG_PP_OD_MASK		BIT(4)
 #define ST_LSM6DSX_REG_FIFO_MODE_ADDR		0x0a
 #define ST_LSM6DSX_FIFO_MODE_MASK		GENMASK(2, 0)
 #define ST_LSM6DSX_FIFO_ODR_MASK		GENMASK(6, 3)
@@ -654,25 +648,6 @@ int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
 	return err;
 }
 
-static irqreturn_t st_lsm6dsx_handler_irq(int irq, void *private)
-{
-	struct st_lsm6dsx_hw *hw = private;
-
-	return hw->sip > 0 ? IRQ_WAKE_THREAD : IRQ_NONE;
-}
-
-static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
-{
-	struct st_lsm6dsx_hw *hw = private;
-	int count;
-
-	mutex_lock(&hw->fifo_lock);
-	count = hw->settings->fifo_ops.read_fifo(hw);
-	mutex_unlock(&hw->fifo_lock);
-
-	return count ? IRQ_HANDLED : IRQ_NONE;
-}
-
 static int st_lsm6dsx_buffer_preenable(struct iio_dev *iio_dev)
 {
 	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
@@ -702,59 +677,8 @@ static const struct iio_buffer_setup_ops st_lsm6dsx_buffer_ops = {
 
 int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw)
 {
-	struct device_node *np = hw->dev->of_node;
-	struct st_sensors_platform_data *pdata;
 	struct iio_buffer *buffer;
-	unsigned long irq_type;
-	bool irq_active_low;
-	int i, err;
-
-	irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq));
-
-	switch (irq_type) {
-	case IRQF_TRIGGER_HIGH:
-	case IRQF_TRIGGER_RISING:
-		irq_active_low = false;
-		break;
-	case IRQF_TRIGGER_LOW:
-	case IRQF_TRIGGER_FALLING:
-		irq_active_low = true;
-		break;
-	default:
-		dev_info(hw->dev, "mode %lx unsupported\n", irq_type);
-		return -EINVAL;
-	}
-
-	err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_HLACTIVE_ADDR,
-				 ST_LSM6DSX_REG_HLACTIVE_MASK,
-				 FIELD_PREP(ST_LSM6DSX_REG_HLACTIVE_MASK,
-					    irq_active_low));
-	if (err < 0)
-		return err;
-
-	pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
-	if ((np && of_property_read_bool(np, "drive-open-drain")) ||
-	    (pdata && pdata->open_drain)) {
-		err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_PP_OD_ADDR,
-					 ST_LSM6DSX_REG_PP_OD_MASK,
-					 FIELD_PREP(ST_LSM6DSX_REG_PP_OD_MASK,
-						    1));
-		if (err < 0)
-			return err;
-
-		irq_type |= IRQF_SHARED;
-	}
-
-	err = devm_request_threaded_irq(hw->dev, hw->irq,
-					st_lsm6dsx_handler_irq,
-					st_lsm6dsx_handler_thread,
-					irq_type | IRQF_ONESHOT,
-					"lsm6dsx", hw);
-	if (err) {
-		dev_err(hw->dev, "failed to request trigger irq %d\n",
-			hw->irq);
-		return err;
-	}
+	int i;
 
 	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
 		if (!hw->iio_devs[i])
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index b65a6ca775e0..ef838206b30f 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -50,6 +50,8 @@
 #include <linux/delay.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/pm.h>
 #include <linux/regmap.h>
 #include <linux/bitfield.h>
@@ -65,6 +67,11 @@
 #define ST_LSM6DSX_REG_BDU_ADDR			0x12
 #define ST_LSM6DSX_REG_BDU_MASK			BIT(6)
 
+#define ST_LSM6DSX_REG_HLACTIVE_ADDR		0x12
+#define ST_LSM6DSX_REG_HLACTIVE_MASK		BIT(5)
+#define ST_LSM6DSX_REG_PP_OD_ADDR		0x12
+#define ST_LSM6DSX_REG_PP_OD_MASK		BIT(4)
+
 static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
 	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
 	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2a, IIO_MOD_Y, 1),
@@ -1525,6 +1532,83 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
 	return iio_dev;
 }
 
+static irqreturn_t st_lsm6dsx_handler_irq(int irq, void *private)
+{
+	struct st_lsm6dsx_hw *hw = private;
+
+	return hw->sip > 0 ? IRQ_WAKE_THREAD : IRQ_NONE;
+}
+
+static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
+{
+	struct st_lsm6dsx_hw *hw = private;
+	int count;
+
+	mutex_lock(&hw->fifo_lock);
+	count = hw->settings->fifo_ops.read_fifo(hw);
+	mutex_unlock(&hw->fifo_lock);
+
+	return count ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
+{
+	struct st_sensors_platform_data *pdata;
+	struct device_node *np = hw->dev->of_node;
+	unsigned long irq_type;
+	bool irq_active_low;
+	int err;
+
+	irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq));
+
+	switch (irq_type) {
+	case IRQF_TRIGGER_HIGH:
+	case IRQF_TRIGGER_RISING:
+		irq_active_low = false;
+		break;
+	case IRQF_TRIGGER_LOW:
+	case IRQF_TRIGGER_FALLING:
+		irq_active_low = true;
+		break;
+	default:
+		dev_info(hw->dev, "mode %lx unsupported\n", irq_type);
+		return -EINVAL;
+	}
+
+	err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_HLACTIVE_ADDR,
+				 ST_LSM6DSX_REG_HLACTIVE_MASK,
+				 FIELD_PREP(ST_LSM6DSX_REG_HLACTIVE_MASK,
+					    irq_active_low));
+	if (err < 0)
+		return err;
+
+	pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
+	if ((np && of_property_read_bool(np, "drive-open-drain")) ||
+	    (pdata && pdata->open_drain)) {
+		err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_PP_OD_ADDR,
+					 ST_LSM6DSX_REG_PP_OD_MASK,
+					 FIELD_PREP(ST_LSM6DSX_REG_PP_OD_MASK,
+						    1));
+		if (err < 0)
+			return err;
+
+		irq_type |= IRQF_SHARED;
+	}
+
+	err = devm_request_threaded_irq(hw->dev, hw->irq,
+					st_lsm6dsx_handler_irq,
+					st_lsm6dsx_handler_thread,
+					irq_type | IRQF_ONESHOT,
+					"lsm6dsx", hw);
+	if (err) {
+		dev_err(hw->dev, "failed to request trigger irq %d\n",
+			hw->irq);
+		return err;
+	}
+
+	return 0;
+}
+
 int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
 		     struct regmap *regmap)
 {
@@ -1573,6 +1657,10 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
 	}
 
 	if (hw->irq > 0) {
+		err = st_lsm6dsx_irq_setup(hw);
+		if (err < 0)
+			return err;
+
 		err = st_lsm6dsx_fifo_setup(hw);
 		if (err < 0)
 			return err;
-- 
2.23.0


  reply index

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-13  9:07 [PATCH v8 0/5] enable motion events for st_lsm6dsx Sean Nyekjaer
2019-09-13  9:07 ` Sean Nyekjaer [this message]
2019-09-13  9:07 ` [PATCH v8 2/5] iio: imu: st_lsm6dsx: add motion events Sean Nyekjaer
2019-09-13  9:07 ` [PATCH v8 3/5] iio: imu: st_lsm6dsx: add wakeup-source option Sean Nyekjaer
2019-09-15 13:42   ` Lorenzo Bianconi
2019-09-13  9:07 ` [PATCH v8 4/5] iio: imu: st_lsm6dsx: always enter interrupt thread Sean Nyekjaer
2019-09-15 12:33   ` Jonathan Cameron
2019-09-15 12:48     ` Lorenzo Bianconi
2019-09-15 13:00       ` Jonathan Cameron
2019-09-15 13:07         ` Lorenzo Bianconi
2019-09-13  9:07 ` [PATCH v8 5/5] iio: imu: st_lsm6dsx: add motion report function and call from interrupt Sean Nyekjaer
2019-09-15 12:30   ` Jonathan Cameron
2019-09-15 13:05     ` Lorenzo Bianconi
2019-09-15 13:18       ` Jonathan Cameron
2019-09-15 13:22         ` Sean Nyekjaer
2019-09-15 13:35           ` Jonathan Cameron
2019-09-16  9:02             ` [RFC PATCH] iio: imu: st_lsm6dsx: filter motion events in driver Sean Nyekjaer
2019-09-16  9:16               ` Lorenzo Bianconi
2019-09-16 11:29                 ` Sean Nyekjaer
2019-09-16 11:55                   ` Lorenzo Bianconi
2019-09-16 12:09                     ` Sean Nyekjaer
2019-09-16 12:22                       ` Lorenzo Bianconi
2019-09-15 13:41         ` [PATCH v8 5/5] iio: imu: st_lsm6dsx: add motion report function and call from interrupt Lorenzo Bianconi

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190913090708.1442057-2-sean@geanix.com \
    --to=sean@geanix.com \
    --cc=armando.visconti@st.com \
    --cc=denis.ciocca@st.com \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=lorenzo.bianconi83@gmail.com \
    --cc=lorenzo@kernel.org \
    --cc=mario.tesi@st.com \
    --cc=martin@geanix.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org linux-iio@archiver.kernel.org
	public-inbox-index linux-iio


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/ public-inbox