[PATCH v10 1/5] iio: imu: st_lsm6dsx: move interrupt thread to core

[PATCH v10 1/5] iio: imu: st_lsm6dsx: move interrupt thread to core

[Sean Nyekjaer]

This prepares the interrupt to be used for other stuff than
fifo reading + event readings.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 .../iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c    | 78 +---------------
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c  | 88 +++++++++++++++++++
 2 files changed, 89 insertions(+), 77 deletions(-)

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index b0f3da1976e4..ef579650fd52 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -30,8 +30,6 @@
  * Denis Ciocca <denis.ciocca@st.com>
  */
 #include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/iio/kfifo_buf.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
@@ -42,10 +40,6 @@
 
 #include "st_lsm6dsx.h"
 
-#define ST_LSM6DSX_REG_HLACTIVE_ADDR		0x12
-#define ST_LSM6DSX_REG_HLACTIVE_MASK		BIT(5)
-#define ST_LSM6DSX_REG_PP_OD_ADDR		0x12
-#define ST_LSM6DSX_REG_PP_OD_MASK		BIT(4)
 #define ST_LSM6DSX_REG_FIFO_MODE_ADDR		0x0a
 #define ST_LSM6DSX_FIFO_MODE_MASK		GENMASK(2, 0)
 #define ST_LSM6DSX_FIFO_ODR_MASK		GENMASK(6, 3)
@@ -654,25 +648,6 @@ int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
 	return err;
 }
 
-static irqreturn_t st_lsm6dsx_handler_irq(int irq, void *private)
-{
-	struct st_lsm6dsx_hw *hw = private;
-
-	return hw->sip > 0 ? IRQ_WAKE_THREAD : IRQ_NONE;
-}
-
-static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
-{
-	struct st_lsm6dsx_hw *hw = private;
-	int count;
-
-	mutex_lock(&hw->fifo_lock);
-	count = hw->settings->fifo_ops.read_fifo(hw);
-	mutex_unlock(&hw->fifo_lock);
-
-	return count ? IRQ_HANDLED : IRQ_NONE;
-}
-
 static int st_lsm6dsx_buffer_preenable(struct iio_dev *iio_dev)
 {
 	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
@@ -702,59 +677,8 @@ static const struct iio_buffer_setup_ops st_lsm6dsx_buffer_ops = {
 
 int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw)
 {
-	struct device_node *np = hw->dev->of_node;
-	struct st_sensors_platform_data *pdata;
 	struct iio_buffer *buffer;
-	unsigned long irq_type;
-	bool irq_active_low;
-	int i, err;
-
-	irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq));
-
-	switch (irq_type) {
-	case IRQF_TRIGGER_HIGH:
-	case IRQF_TRIGGER_RISING:
-		irq_active_low = false;
-		break;
-	case IRQF_TRIGGER_LOW:
-	case IRQF_TRIGGER_FALLING:
-		irq_active_low = true;
-		break;
-	default:
-		dev_info(hw->dev, "mode %lx unsupported\n", irq_type);
-		return -EINVAL;
-	}
-
-	err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_HLACTIVE_ADDR,
-				 ST_LSM6DSX_REG_HLACTIVE_MASK,
-				 FIELD_PREP(ST_LSM6DSX_REG_HLACTIVE_MASK,
-					    irq_active_low));
-	if (err < 0)
-		return err;
-
-	pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
-	if ((np && of_property_read_bool(np, "drive-open-drain")) ||
-	    (pdata && pdata->open_drain)) {
-		err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_PP_OD_ADDR,
-					 ST_LSM6DSX_REG_PP_OD_MASK,
-					 FIELD_PREP(ST_LSM6DSX_REG_PP_OD_MASK,
-						    1));
-		if (err < 0)
-			return err;
-
-		irq_type |= IRQF_SHARED;
-	}
-
-	err = devm_request_threaded_irq(hw->dev, hw->irq,
-					st_lsm6dsx_handler_irq,
-					st_lsm6dsx_handler_thread,
-					irq_type | IRQF_ONESHOT,
-					"lsm6dsx", hw);
-	if (err) {
-		dev_err(hw->dev, "failed to request trigger irq %d\n",
-			hw->irq);
-		return err;
-	}
+	int i;
 
 	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
 		if (!hw->iio_devs[i])
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index b65a6ca775e0..ef838206b30f 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -50,6 +50,8 @@
 #include <linux/delay.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/pm.h>
 #include <linux/regmap.h>
 #include <linux/bitfield.h>
@@ -65,6 +67,11 @@
 #define ST_LSM6DSX_REG_BDU_ADDR			0x12
 #define ST_LSM6DSX_REG_BDU_MASK			BIT(6)
 
+#define ST_LSM6DSX_REG_HLACTIVE_ADDR		0x12
+#define ST_LSM6DSX_REG_HLACTIVE_MASK		BIT(5)
+#define ST_LSM6DSX_REG_PP_OD_ADDR		0x12
+#define ST_LSM6DSX_REG_PP_OD_MASK		BIT(4)
+
 static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
 	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
 	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2a, IIO_MOD_Y, 1),
@@ -1525,6 +1532,83 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
 	return iio_dev;
 }
 
+static irqreturn_t st_lsm6dsx_handler_irq(int irq, void *private)
+{
+	struct st_lsm6dsx_hw *hw = private;
+
+	return hw->sip > 0 ? IRQ_WAKE_THREAD : IRQ_NONE;
+}
+
+static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
+{
+	struct st_lsm6dsx_hw *hw = private;
+	int count;
+
+	mutex_lock(&hw->fifo_lock);
+	count = hw->settings->fifo_ops.read_fifo(hw);
+	mutex_unlock(&hw->fifo_lock);
+
+	return count ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
+{
+	struct st_sensors_platform_data *pdata;
+	struct device_node *np = hw->dev->of_node;
+	unsigned long irq_type;
+	bool irq_active_low;
+	int err;
+
+	irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq));
+
+	switch (irq_type) {
+	case IRQF_TRIGGER_HIGH:
+	case IRQF_TRIGGER_RISING:
+		irq_active_low = false;
+		break;
+	case IRQF_TRIGGER_LOW:
+	case IRQF_TRIGGER_FALLING:
+		irq_active_low = true;
+		break;
+	default:
+		dev_info(hw->dev, "mode %lx unsupported\n", irq_type);
+		return -EINVAL;
+	}
+
+	err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_HLACTIVE_ADDR,
+				 ST_LSM6DSX_REG_HLACTIVE_MASK,
+				 FIELD_PREP(ST_LSM6DSX_REG_HLACTIVE_MASK,
+					    irq_active_low));
+	if (err < 0)
+		return err;
+
+	pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
+	if ((np && of_property_read_bool(np, "drive-open-drain")) ||
+	    (pdata && pdata->open_drain)) {
+		err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_PP_OD_ADDR,
+					 ST_LSM6DSX_REG_PP_OD_MASK,
+					 FIELD_PREP(ST_LSM6DSX_REG_PP_OD_MASK,
+						    1));
+		if (err < 0)
+			return err;
+
+		irq_type |= IRQF_SHARED;
+	}
+
+	err = devm_request_threaded_irq(hw->dev, hw->irq,
+					st_lsm6dsx_handler_irq,
+					st_lsm6dsx_handler_thread,
+					irq_type | IRQF_ONESHOT,
+					"lsm6dsx", hw);
+	if (err) {
+		dev_err(hw->dev, "failed to request trigger irq %d\n",
+			hw->irq);
+		return err;
+	}
+
+	return 0;
+}
+
 int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
 		     struct regmap *regmap)
 {
@@ -1573,6 +1657,10 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
 	}
 
 	if (hw->irq > 0) {
+		err = st_lsm6dsx_irq_setup(hw);
+		if (err < 0)
+			return err;
+
 		err = st_lsm6dsx_fifo_setup(hw);
 		if (err < 0)
 			return err;
-- 
2.23.0

[PATCH v10 2/5] iio: imu: st_lsm6dsx: add motion events

[Sean Nyekjaer]

Add event channels that controls the creation of motion events.
Tested on ISM330DLC

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
---
Changes since v4:
 * Added check for event support
 * Added registers for more devices that support this event

Changes since v5:
 * Moved wakeup_src masks to PATCH 5/6

Changes since v6:
 * None

Changes since v7:
 * None

Changes since v8:
 * None

Changes since v10:
 * enable_event changed to a u8

 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h      |  41 ++++
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 191 ++++++++++++++++++-
 2 files changed, 228 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 21d14072d1c6..6b0ba48394eb 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -12,6 +12,7 @@
 #define ST_LSM6DSX_H
 
 #include <linux/device.h>
+#include <linux/iio/iio.h>
 
 #define ST_LSM6DS3_DEV_NAME	"lsm6ds3"
 #define ST_LSM6DS3H_DEV_NAME	"lsm6ds3h"
@@ -54,6 +55,26 @@ enum st_lsm6dsx_hw_id {
 					 * ST_LSM6DSX_TAGGED_SAMPLE_SIZE)
 #define ST_LSM6DSX_SHIFT_VAL(val, mask)	(((val) << __ffs(mask)) & (mask))
 
+#define ST_LSM6DSX_CHANNEL_ACC(chan_type, addr, mod, scan_idx)		\
+{									\
+	.type = chan_type,						\
+	.address = addr,						\
+	.modified = 1,							\
+	.channel2 = mod,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),			\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),		\
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
+	.scan_index = scan_idx,						\
+	.scan_type = {							\
+		.sign = 's',						\
+		.realbits = 16,						\
+		.storagebits = 16,					\
+		.endianness = IIO_LE,					\
+	},								\
+	.event_spec = &st_lsm6dsx_event,				\
+	.num_event_specs = 1,						\
+}
+
 #define ST_LSM6DSX_CHANNEL(chan_type, addr, mod, scan_idx)		\
 {									\
 	.type = chan_type,						\
@@ -162,6 +183,11 @@ struct st_lsm6dsx_shub_settings {
 	u8 batch_en;
 };
 
+struct st_lsm6dsx_event_settings {
+	struct st_lsm6dsx_reg enable_reg;
+	struct st_lsm6dsx_reg wakeup_reg;
+};
+
 enum st_lsm6dsx_ext_sensor_id {
 	ST_LSM6DSX_ID_MAGN,
 };
@@ -225,6 +251,9 @@ struct st_lsm6dsx_settings {
 	u8 wai;
 	u8 int1_addr;
 	u8 int2_addr;
+	u8 int1_func_addr;
+	u8 int2_func_addr;
+	u8 int_func_mask;
 	u8 reset_addr;
 	u16 max_fifo_size;
 	struct {
@@ -244,6 +273,7 @@ struct st_lsm6dsx_settings {
 	struct st_lsm6dsx_fifo_ops fifo_ops;
 	struct st_lsm6dsx_hw_ts_settings ts_settings;
 	struct st_lsm6dsx_shub_settings shub_settings;
+	struct st_lsm6dsx_event_settings event_settings;
 };
 
 enum st_lsm6dsx_sensor_id {
@@ -324,6 +354,10 @@ struct st_lsm6dsx_hw {
 	u8 ts_sip;
 	u8 sip;
 
+	u8 event_threshold;
+	u8 enable_event;
+	struct st_lsm6dsx_reg irq_routing;
+
 	u8 *buff;
 
 	struct iio_dev *iio_devs[ST_LSM6DSX_ID_MAX];
@@ -331,6 +365,13 @@ struct st_lsm6dsx_hw {
 	const struct st_lsm6dsx_settings *settings;
 };
 
+static const struct iio_event_spec st_lsm6dsx_event = {
+	.type = IIO_EV_TYPE_THRESH,
+	.dir = IIO_EV_DIR_EITHER,
+	.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			 BIT(IIO_EV_INFO_ENABLE)
+};
+
 static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0};
 extern const struct dev_pm_ops st_lsm6dsx_pm_ops;
 
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index ef838206b30f..4198ba263d03 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -73,9 +73,9 @@
 #define ST_LSM6DSX_REG_PP_OD_MASK		BIT(4)
 
 static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
-	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
-	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2a, IIO_MOD_Y, 1),
-	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2c, IIO_MOD_Z, 2),
+	ST_LSM6DSX_CHANNEL_ACC(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
+	ST_LSM6DSX_CHANNEL_ACC(IIO_ACCEL, 0x2a, IIO_MOD_Y, 1),
+	ST_LSM6DSX_CHANNEL_ACC(IIO_ACCEL, 0x2c, IIO_MOD_Z, 2),
 	IIO_CHAN_SOFT_TIMESTAMP(3),
 };
 
@@ -168,6 +168,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 		.wai = 0x69,
 		.int1_addr = 0x0d,
 		.int2_addr = 0x0e,
+		.int1_func_addr = 0x5e,
+		.int2_func_addr = 0x5f,
+		.int_func_mask = BIT(5),
 		.reset_addr = 0x12,
 		.max_fifo_size = 1365,
 		.id = {
@@ -279,11 +282,20 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.mask = GENMASK(5, 3),
 			},
 		},
+		.event_settings = {
+			.wakeup_reg = {
+				.addr = 0x5B,
+				.mask = GENMASK(5, 0),
+			},
+		},
 	},
 	{
 		.wai = 0x69,
 		.int1_addr = 0x0d,
 		.int2_addr = 0x0e,
+		.int1_func_addr = 0x5e,
+		.int2_func_addr = 0x5f,
+		.int_func_mask = BIT(5),
 		.reset_addr = 0x12,
 		.max_fifo_size = 682,
 		.id = {
@@ -395,11 +407,20 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.mask = GENMASK(5, 3),
 			},
 		},
+		.event_settings = {
+			.wakeup_reg = {
+				.addr = 0x5B,
+				.mask = GENMASK(5, 0),
+			},
+		},
 	},
 	{
 		.wai = 0x6a,
 		.int1_addr = 0x0d,
 		.int2_addr = 0x0e,
+		.int1_func_addr = 0x5e,
+		.int2_func_addr = 0x5f,
+		.int_func_mask = BIT(5),
 		.reset_addr = 0x12,
 		.max_fifo_size = 682,
 		.id = {
@@ -520,6 +541,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.mask = GENMASK(5, 3),
 			},
 		},
+		.event_settings = {
+			.enable_reg = {
+				.addr = 0x58,
+				.mask = BIT(7),
+			},
+			.wakeup_reg = {
+				.addr = 0x5B,
+				.mask = GENMASK(5, 0),
+			},
+		},
 	},
 	{
 		.wai = 0x6c,
@@ -666,6 +697,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 		.wai = 0x6b,
 		.int1_addr = 0x0d,
 		.int2_addr = 0x0e,
+		.int1_func_addr = 0x5e,
+		.int2_func_addr = 0x5f,
+		.int_func_mask = BIT(5),
 		.reset_addr = 0x12,
 		.max_fifo_size = 512,
 		.id = {
@@ -773,11 +807,24 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.mask = GENMASK(7, 6),
 			},
 		},
+		.event_settings = {
+			.enable_reg = {
+				.addr = 0x58,
+				.mask = BIT(7),
+			},
+			.wakeup_reg = {
+				.addr = 0x5B,
+				.mask = GENMASK(5, 0),
+			},
+		},
 	},
 	{
 		.wai = 0x6b,
 		.int1_addr = 0x0d,
 		.int2_addr = 0x0e,
+		.int1_func_addr = 0x5e,
+		.int2_func_addr = 0x5f,
+		.int_func_mask = BIT(5),
 		.reset_addr = 0x12,
 		.max_fifo_size = 512,
 		.id = {
@@ -913,6 +960,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			.slv0_addr = 0x15,
 			.dw_slv0_addr = 0x21,
 			.batch_en = BIT(3),
+		},
+		.event_settings = {
+			.enable_reg = {
+				.addr = 0x58,
+				.mask = BIT(7),
+			},
+			.wakeup_reg = {
+				.addr = 0x5B,
+				.mask = GENMASK(5, 0),
+			},
 		}
 	},
 };
@@ -1119,7 +1176,8 @@ static int st_lsm6dsx_read_oneshot(struct st_lsm6dsx_sensor *sensor,
 	if (err < 0)
 		return err;
 
-	st_lsm6dsx_sensor_set_enable(sensor, false);
+	if (!hw->enable_event)
+		st_lsm6dsx_sensor_set_enable(sensor, false);
 
 	*val = (s16)le16_to_cpu(data);
 
@@ -1192,6 +1250,123 @@ static int st_lsm6dsx_write_raw(struct iio_dev *iio_dev,
 	return err;
 }
 
+int st_lsm6dsx_event_setup(struct st_lsm6dsx_hw *hw, int state)
+{
+	int err;
+	u8 enable = 0;
+
+	if (!hw->settings->int1_func_addr)
+		return -ENOTSUPP;
+
+	enable = state ? hw->settings->event_settings.enable_reg.mask : 0;
+
+	err = regmap_update_bits(hw->regmap,
+				 hw->settings->event_settings.enable_reg.addr,
+				 hw->settings->event_settings.enable_reg.mask,
+				 enable);
+	if (err < 0)
+		return err;
+
+	enable = state ? hw->irq_routing.mask : 0;
+
+	/* Enable wakeup interrupt */
+	return regmap_update_bits(hw->regmap, hw->irq_routing.addr,
+				  hw->irq_routing.mask,
+				  enable);
+}
+
+static int st_lsm6dsx_read_event(struct iio_dev *iio_dev,
+				   const struct iio_chan_spec *chan,
+				   enum iio_event_type type,
+				   enum iio_event_direction dir,
+				   enum iio_event_info info,
+				   int *val, int *val2)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+
+	if (type != IIO_EV_TYPE_THRESH)
+		return -EINVAL;
+
+	*val2 = 0;
+	*val = hw->event_threshold;
+
+	return IIO_VAL_INT;
+}
+
+static int st_lsm6dsx_write_event(struct iio_dev *iio_dev,
+				    const struct iio_chan_spec *chan,
+				    enum iio_event_type type,
+				    enum iio_event_direction dir,
+				    enum iio_event_info info,
+				    int val, int val2)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	int err;
+
+	if (type != IIO_EV_TYPE_THRESH)
+		return -EINVAL;
+
+	if (val < 0 || val > 31)
+		return -EINVAL;
+
+	err = regmap_update_bits(hw->regmap,
+				 hw->settings->event_settings.wakeup_reg.addr,
+				 hw->settings->event_settings.wakeup_reg.mask,
+				 val);
+	if (err)
+		return -EINVAL;
+
+	hw->event_threshold = val;
+
+	return 0;
+}
+
+static int st_lsm6dsx_read_event_config(struct iio_dev *iio_dev,
+					  const struct iio_chan_spec *chan,
+					  enum iio_event_type type,
+					  enum iio_event_direction dir)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+
+	if (type != IIO_EV_TYPE_THRESH)
+		return -EINVAL;
+
+	return hw->enable_event;
+}
+
+static int st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
+					   const struct iio_chan_spec *chan,
+					   enum iio_event_type type,
+					   enum iio_event_direction dir,
+					   int state)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	int err = 0;
+
+	if (type != IIO_EV_TYPE_THRESH)
+		return -EINVAL;
+
+	/* do not enable events if they are already enabled */
+	if (state && hw->enable_event)
+		return 0;
+
+	err = st_lsm6dsx_event_setup(hw, state);
+	if (err < 0)
+		return err;
+
+	err = st_lsm6dsx_sensor_set_enable(sensor, state);
+	if (err < 0)
+		return err;
+
+	hw->enable_event = state;
+
+	return 0;
+}
+
 int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val)
 {
 	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
@@ -1276,6 +1451,10 @@ static const struct iio_info st_lsm6dsx_acc_info = {
 	.attrs = &st_lsm6dsx_acc_attribute_group,
 	.read_raw = st_lsm6dsx_read_raw,
 	.write_raw = st_lsm6dsx_write_raw,
+	.read_event_value = st_lsm6dsx_read_event,
+	.write_event_value = st_lsm6dsx_write_event,
+	.read_event_config = st_lsm6dsx_read_event_config,
+	.write_event_config = st_lsm6dsx_write_event_config,
 	.hwfifo_set_watermark = st_lsm6dsx_set_watermark,
 };
 
@@ -1321,9 +1500,13 @@ static int st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw, u8 *drdy_reg)
 	switch (drdy_pin) {
 	case 1:
 		*drdy_reg = hw->settings->int1_addr;
+		hw->irq_routing.addr = hw->settings->int1_func_addr;
+		hw->irq_routing.mask = hw->settings->int_func_mask;
 		break;
 	case 2:
 		*drdy_reg = hw->settings->int2_addr;
+		hw->irq_routing.addr = hw->settings->int2_func_addr;
+		hw->irq_routing.mask = hw->settings->int_func_mask;
 		break;
 	default:
 		dev_err(hw->dev, "unsupported data ready pin\n");
-- 
2.23.0

[PATCH v10 3/5] iio: imu: st_lsm6dsx: add wakeup-source option

[Sean Nyekjaer]

This add ways for the SoC to wake from accelerometer wake events.

In the suspend function we skip disabling the sensor if wakeup-source
and events are activated.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
---
Changes since v4:
 * More devices supports wakeup

Changes since v5:
 * None

Changes since v6:
 * None

Changes since v7:
 * Add check for hw->enable_event
 * Moved disable_irq_wake section so it's called
 * Removed not neeeded continue from disable_irq_wake section

Changes since v8:
 * Using sensor->id instead of i in suspend/resume loops

Changes since v9:
 * None

 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 4198ba263d03..a7f12cf57f11 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -1858,6 +1858,9 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
 			return err;
 	}
 
+	if (dev->of_node && of_property_read_bool(dev->of_node, "wakeup-source"))
+		device_init_wakeup(dev, true);
+
 	return 0;
 }
 EXPORT_SYMBOL(st_lsm6dsx_probe);
@@ -1876,6 +1879,13 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev)
 		if (!(hw->enable_mask & BIT(sensor->id)))
 			continue;
 
+		if (device_may_wakeup(dev) &&
+		    sensor->id == ST_LSM6DSX_ID_ACC && hw->enable_event) {
+			/* Enable wake from IRQ */
+			enable_irq_wake(hw->irq);
+			continue;
+		}
+
 		if (sensor->id == ST_LSM6DSX_ID_EXT0 ||
 		    sensor->id == ST_LSM6DSX_ID_EXT1 ||
 		    sensor->id == ST_LSM6DSX_ID_EXT2)
@@ -1905,6 +1915,10 @@ static int __maybe_unused st_lsm6dsx_resume(struct device *dev)
 			continue;
 
 		sensor = iio_priv(hw->iio_devs[i]);
+		if (device_may_wakeup(dev) &&
+		    sensor->id == ST_LSM6DSX_ID_ACC && hw->enable_event)
+			disable_irq_wake(hw->irq);
+
 		if (!(hw->suspend_mask & BIT(sensor->id)))
 			continue;
 
-- 
2.23.0

[PATCH v10 4/5] iio: imu: st_lsm6dsx: always enter interrupt thread

[Sean Nyekjaer]

The interrupt source can come from multiple sources,
fifo and wake interrupts.
Enter interrupt thread to check which interrupt that has fired.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
---
Changes since v8:
 * Remove st_lsm6dsx_handler_irq function to enter interrupt thread
   at every interrupt

Changes since v9:
 * None

 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index a7f12cf57f11..6b03c50f4732 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -1715,13 +1715,6 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
 	return iio_dev;
 }
 
-static irqreturn_t st_lsm6dsx_handler_irq(int irq, void *private)
-{
-	struct st_lsm6dsx_hw *hw = private;
-
-	return hw->sip > 0 ? IRQ_WAKE_THREAD : IRQ_NONE;
-}
-
 static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
 {
 	struct st_lsm6dsx_hw *hw = private;
@@ -1779,7 +1772,7 @@ static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
 	}
 
 	err = devm_request_threaded_irq(hw->dev, hw->irq,
-					st_lsm6dsx_handler_irq,
+					NULL,
 					st_lsm6dsx_handler_thread,
 					irq_type | IRQF_ONESHOT,
 					"lsm6dsx", hw);
-- 
2.23.0

[PATCH v10 5/5] iio: imu: st_lsm6dsx: add motion report function and call from interrupt

[Sean Nyekjaer]

Report iio motion events to iio subsystem and filter motion events.
Wakeup will still be on all channels as it's not possible to do the filtering
in hw.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
---
Changes since v4:
 * Updated bitmask as pr Jonathans comments

Changes since v5:
 * None

Changes since v6:
 * None

Changes since v7:
 * None

Changes since v8:
 * None

Changes since v9:
 * Merged with "iio: imu: st_lsm6dsx: filter motion events in driver"

 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h      |  5 +
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 97 +++++++++++++++++++-
 2 files changed, 98 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 6b0ba48394eb..fd02d0e184f3 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -186,6 +186,11 @@ struct st_lsm6dsx_shub_settings {
 struct st_lsm6dsx_event_settings {
 	struct st_lsm6dsx_reg enable_reg;
 	struct st_lsm6dsx_reg wakeup_reg;
+	u8 wakeup_src_reg;
+	u8 wakeup_src_status_mask;
+	u8 wakeup_src_z_mask;
+	u8 wakeup_src_y_mask;
+	u8 wakeup_src_x_mask;
 };
 
 enum st_lsm6dsx_ext_sensor_id {
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 6b03c50f4732..f4f71cf4187a 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -48,6 +48,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/delay.h>
+#include <linux/iio/events.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/interrupt.h>
@@ -287,6 +288,11 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.addr = 0x5B,
 				.mask = GENMASK(5, 0),
 			},
+			.wakeup_src_reg = 0x1b,
+			.wakeup_src_status_mask = BIT(3),
+			.wakeup_src_z_mask = BIT(0),
+			.wakeup_src_y_mask = BIT(1),
+			.wakeup_src_x_mask = BIT(2),
 		},
 	},
 	{
@@ -412,6 +418,11 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.addr = 0x5B,
 				.mask = GENMASK(5, 0),
 			},
+			.wakeup_src_reg = 0x1b,
+			.wakeup_src_status_mask = BIT(3),
+			.wakeup_src_z_mask = BIT(0),
+			.wakeup_src_y_mask = BIT(1),
+			.wakeup_src_x_mask = BIT(2),
 		},
 	},
 	{
@@ -550,6 +561,11 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.addr = 0x5B,
 				.mask = GENMASK(5, 0),
 			},
+			.wakeup_src_reg = 0x1b,
+			.wakeup_src_status_mask = BIT(3),
+			.wakeup_src_z_mask = BIT(0),
+			.wakeup_src_y_mask = BIT(1),
+			.wakeup_src_x_mask = BIT(2),
 		},
 	},
 	{
@@ -816,6 +832,11 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.addr = 0x5B,
 				.mask = GENMASK(5, 0),
 			},
+			.wakeup_src_reg = 0x1b,
+			.wakeup_src_status_mask = BIT(3),
+			.wakeup_src_z_mask = BIT(0),
+			.wakeup_src_y_mask = BIT(1),
+			.wakeup_src_x_mask = BIT(2),
 		},
 	},
 	{
@@ -970,6 +991,11 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.addr = 0x5B,
 				.mask = GENMASK(5, 0),
 			},
+			.wakeup_src_reg = 0x1b,
+			.wakeup_src_status_mask = BIT(3),
+			.wakeup_src_z_mask = BIT(0),
+			.wakeup_src_y_mask = BIT(1),
+			.wakeup_src_x_mask = BIT(2),
 		}
 	},
 };
@@ -1334,7 +1360,7 @@ static int st_lsm6dsx_read_event_config(struct iio_dev *iio_dev,
 	if (type != IIO_EV_TYPE_THRESH)
 		return -EINVAL;
 
-	return hw->enable_event;
+	return !!(hw->enable_event & BIT(chan->channel2));
 }
 
 static int st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
@@ -1345,13 +1371,28 @@ static int st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
 {
 	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
 	struct st_lsm6dsx_hw *hw = sensor->hw;
+	u8 enable_event;
 	int err = 0;
 
 	if (type != IIO_EV_TYPE_THRESH)
 		return -EINVAL;
 
-	/* do not enable events if they are already enabled */
-	if (state && hw->enable_event)
+	if (state) {
+		enable_event = hw->enable_event | BIT(chan->channel2);
+
+		/* do not enable events if they are already enabled */
+		if (hw->enable_event)
+			goto out;
+	} else {
+		enable_event = hw->enable_event & ~BIT(chan->channel2);
+
+		/* only turn off sensor if no events is enabled */
+		if (enable_event)
+			goto out;
+	}
+
+	/* stop here if no changes have been made */
+	if (hw->enable_event == enable_event)
 		return 0;
 
 	err = st_lsm6dsx_event_setup(hw, state);
@@ -1362,7 +1403,8 @@ static int st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
 	if (err < 0)
 		return err;
 
-	hw->enable_event = state;
+out:
+	hw->enable_event = enable_event;
 
 	return 0;
 }
@@ -1715,10 +1757,57 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
 	return iio_dev;
 }
 
+void st_lsm6dsx_report_motion_event(struct st_lsm6dsx_hw *hw, int data)
+{
+	s64 timestamp = iio_get_time_ns(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
+
+	if ((data & hw->settings->event_settings.wakeup_src_z_mask) &&
+	    (hw->enable_event & BIT(IIO_MOD_Z)))
+		iio_push_event(hw->iio_devs[ST_LSM6DSX_ID_ACC],
+			       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+						  0,
+						  IIO_MOD_Z,
+						  IIO_EV_TYPE_THRESH,
+						  IIO_EV_DIR_EITHER),
+						  timestamp);
+
+	if ((data & hw->settings->event_settings.wakeup_src_y_mask) &&
+	    (hw->enable_event & BIT(IIO_MOD_Y)))
+		iio_push_event(hw->iio_devs[ST_LSM6DSX_ID_ACC],
+			       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+						  0,
+						  IIO_MOD_Y,
+						  IIO_EV_TYPE_THRESH,
+						  IIO_EV_DIR_EITHER),
+						  timestamp);
+
+	if ((data & hw->settings->event_settings.wakeup_src_x_mask) &&
+	    (hw->enable_event & BIT(IIO_MOD_X)))
+		iio_push_event(hw->iio_devs[ST_LSM6DSX_ID_ACC],
+			       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+						  0,
+						  IIO_MOD_X,
+						  IIO_EV_TYPE_THRESH,
+						  IIO_EV_DIR_EITHER),
+						  timestamp);
+}
+
 static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
 {
 	struct st_lsm6dsx_hw *hw = private;
 	int count;
+	int data, err;
+
+	if (hw->enable_event) {
+		err = regmap_read(hw->regmap,
+				  hw->settings->event_settings.wakeup_src_reg,
+				  &data);
+		if (err < 0)
+			return IRQ_NONE;
+
+		if (data & hw->settings->event_settings.wakeup_src_status_mask)
+			st_lsm6dsx_report_motion_event(hw, data);
+	}
 
 	mutex_lock(&hw->fifo_lock);
 	count = hw->settings->fifo_ops.read_fifo(hw);
-- 
2.23.0

Re: [PATCH v10 1/5] iio: imu: st_lsm6dsx: move interrupt thread to core

[Lorenzo Bianconi]

[-- Attachment #1: Type: text/plain, Size: 7721 bytes --]

> This prepares the interrupt to be used for other stuff than
> fifo reading + event readings.
> 
> Signed-off-by: Sean Nyekjaer <sean@geanix.com>
> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>

for the series:
Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org>

> ---
>  .../iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c    | 78 +---------------
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c  | 88 +++++++++++++++++++
>  2 files changed, 89 insertions(+), 77 deletions(-)
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> index b0f3da1976e4..ef579650fd52 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> @@ -30,8 +30,6 @@
>   * Denis Ciocca <denis.ciocca@st.com>
>   */
>  #include <linux/module.h>
> -#include <linux/interrupt.h>
> -#include <linux/irq.h>
>  #include <linux/iio/kfifo_buf.h>
>  #include <linux/iio/iio.h>
>  #include <linux/iio/buffer.h>
> @@ -42,10 +40,6 @@
>  
>  #include "st_lsm6dsx.h"
>  
> -#define ST_LSM6DSX_REG_HLACTIVE_ADDR		0x12
> -#define ST_LSM6DSX_REG_HLACTIVE_MASK		BIT(5)
> -#define ST_LSM6DSX_REG_PP_OD_ADDR		0x12
> -#define ST_LSM6DSX_REG_PP_OD_MASK		BIT(4)
>  #define ST_LSM6DSX_REG_FIFO_MODE_ADDR		0x0a
>  #define ST_LSM6DSX_FIFO_MODE_MASK		GENMASK(2, 0)
>  #define ST_LSM6DSX_FIFO_ODR_MASK		GENMASK(6, 3)
> @@ -654,25 +648,6 @@ int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
>  	return err;
>  }
>  
> -static irqreturn_t st_lsm6dsx_handler_irq(int irq, void *private)
> -{
> -	struct st_lsm6dsx_hw *hw = private;
> -
> -	return hw->sip > 0 ? IRQ_WAKE_THREAD : IRQ_NONE;
> -}
> -
> -static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
> -{
> -	struct st_lsm6dsx_hw *hw = private;
> -	int count;
> -
> -	mutex_lock(&hw->fifo_lock);
> -	count = hw->settings->fifo_ops.read_fifo(hw);
> -	mutex_unlock(&hw->fifo_lock);
> -
> -	return count ? IRQ_HANDLED : IRQ_NONE;
> -}
> -
>  static int st_lsm6dsx_buffer_preenable(struct iio_dev *iio_dev)
>  {
>  	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
> @@ -702,59 +677,8 @@ static const struct iio_buffer_setup_ops st_lsm6dsx_buffer_ops = {
>  
>  int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw)
>  {
> -	struct device_node *np = hw->dev->of_node;
> -	struct st_sensors_platform_data *pdata;
>  	struct iio_buffer *buffer;
> -	unsigned long irq_type;
> -	bool irq_active_low;
> -	int i, err;
> -
> -	irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq));
> -
> -	switch (irq_type) {
> -	case IRQF_TRIGGER_HIGH:
> -	case IRQF_TRIGGER_RISING:
> -		irq_active_low = false;
> -		break;
> -	case IRQF_TRIGGER_LOW:
> -	case IRQF_TRIGGER_FALLING:
> -		irq_active_low = true;
> -		break;
> -	default:
> -		dev_info(hw->dev, "mode %lx unsupported\n", irq_type);
> -		return -EINVAL;
> -	}
> -
> -	err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_HLACTIVE_ADDR,
> -				 ST_LSM6DSX_REG_HLACTIVE_MASK,
> -				 FIELD_PREP(ST_LSM6DSX_REG_HLACTIVE_MASK,
> -					    irq_active_low));
> -	if (err < 0)
> -		return err;
> -
> -	pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
> -	if ((np && of_property_read_bool(np, "drive-open-drain")) ||
> -	    (pdata && pdata->open_drain)) {
> -		err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_PP_OD_ADDR,
> -					 ST_LSM6DSX_REG_PP_OD_MASK,
> -					 FIELD_PREP(ST_LSM6DSX_REG_PP_OD_MASK,
> -						    1));
> -		if (err < 0)
> -			return err;
> -
> -		irq_type |= IRQF_SHARED;
> -	}
> -
> -	err = devm_request_threaded_irq(hw->dev, hw->irq,
> -					st_lsm6dsx_handler_irq,
> -					st_lsm6dsx_handler_thread,
> -					irq_type | IRQF_ONESHOT,
> -					"lsm6dsx", hw);
> -	if (err) {
> -		dev_err(hw->dev, "failed to request trigger irq %d\n",
> -			hw->irq);
> -		return err;
> -	}
> +	int i;
>  
>  	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
>  		if (!hw->iio_devs[i])
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index b65a6ca775e0..ef838206b30f 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -50,6 +50,8 @@
>  #include <linux/delay.h>
>  #include <linux/iio/iio.h>
>  #include <linux/iio/sysfs.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
>  #include <linux/pm.h>
>  #include <linux/regmap.h>
>  #include <linux/bitfield.h>
> @@ -65,6 +67,11 @@
>  #define ST_LSM6DSX_REG_BDU_ADDR			0x12
>  #define ST_LSM6DSX_REG_BDU_MASK			BIT(6)
>  
> +#define ST_LSM6DSX_REG_HLACTIVE_ADDR		0x12
> +#define ST_LSM6DSX_REG_HLACTIVE_MASK		BIT(5)
> +#define ST_LSM6DSX_REG_PP_OD_ADDR		0x12
> +#define ST_LSM6DSX_REG_PP_OD_MASK		BIT(4)
> +
>  static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
>  	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
>  	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2a, IIO_MOD_Y, 1),
> @@ -1525,6 +1532,83 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
>  	return iio_dev;
>  }
>  
> +static irqreturn_t st_lsm6dsx_handler_irq(int irq, void *private)
> +{
> +	struct st_lsm6dsx_hw *hw = private;
> +
> +	return hw->sip > 0 ? IRQ_WAKE_THREAD : IRQ_NONE;
> +}
> +
> +static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
> +{
> +	struct st_lsm6dsx_hw *hw = private;
> +	int count;
> +
> +	mutex_lock(&hw->fifo_lock);
> +	count = hw->settings->fifo_ops.read_fifo(hw);
> +	mutex_unlock(&hw->fifo_lock);
> +
> +	return count ? IRQ_HANDLED : IRQ_NONE;
> +}
> +
> +static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
> +{
> +	struct st_sensors_platform_data *pdata;
> +	struct device_node *np = hw->dev->of_node;
> +	unsigned long irq_type;
> +	bool irq_active_low;
> +	int err;
> +
> +	irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq));
> +
> +	switch (irq_type) {
> +	case IRQF_TRIGGER_HIGH:
> +	case IRQF_TRIGGER_RISING:
> +		irq_active_low = false;
> +		break;
> +	case IRQF_TRIGGER_LOW:
> +	case IRQF_TRIGGER_FALLING:
> +		irq_active_low = true;
> +		break;
> +	default:
> +		dev_info(hw->dev, "mode %lx unsupported\n", irq_type);
> +		return -EINVAL;
> +	}
> +
> +	err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_HLACTIVE_ADDR,
> +				 ST_LSM6DSX_REG_HLACTIVE_MASK,
> +				 FIELD_PREP(ST_LSM6DSX_REG_HLACTIVE_MASK,
> +					    irq_active_low));
> +	if (err < 0)
> +		return err;
> +
> +	pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
> +	if ((np && of_property_read_bool(np, "drive-open-drain")) ||
> +	    (pdata && pdata->open_drain)) {
> +		err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_PP_OD_ADDR,
> +					 ST_LSM6DSX_REG_PP_OD_MASK,
> +					 FIELD_PREP(ST_LSM6DSX_REG_PP_OD_MASK,
> +						    1));
> +		if (err < 0)
> +			return err;
> +
> +		irq_type |= IRQF_SHARED;
> +	}
> +
> +	err = devm_request_threaded_irq(hw->dev, hw->irq,
> +					st_lsm6dsx_handler_irq,
> +					st_lsm6dsx_handler_thread,
> +					irq_type | IRQF_ONESHOT,
> +					"lsm6dsx", hw);
> +	if (err) {
> +		dev_err(hw->dev, "failed to request trigger irq %d\n",
> +			hw->irq);
> +		return err;
> +	}
> +
> +	return 0;
> +}
> +
>  int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
>  		     struct regmap *regmap)
>  {
> @@ -1573,6 +1657,10 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
>  	}
>  
>  	if (hw->irq > 0) {
> +		err = st_lsm6dsx_irq_setup(hw);
> +		if (err < 0)
> +			return err;
> +
>  		err = st_lsm6dsx_fifo_setup(hw);
>  		if (err < 0)
>  			return err;
> -- 
> 2.23.0
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v10 1/5] iio: imu: st_lsm6dsx: move interrupt thread to core

[Jonathan Cameron]

On Mon, 16 Sep 2019 15:56:26 +0200
Sean Nyekjaer <sean@geanix.com> wrote:

> This prepares the interrupt to be used for other stuff than
> fifo reading + event readings.
> 
> Signed-off-by: Sean Nyekjaer <sean@geanix.com>
> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Applied to the togreg branch of iio.git and pushed out as testing for the
autobuilders to play with them.

Thanks,

Jonathan

> ---
>  .../iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c    | 78 +---------------
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c  | 88 +++++++++++++++++++
>  2 files changed, 89 insertions(+), 77 deletions(-)
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> index b0f3da1976e4..ef579650fd52 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> @@ -30,8 +30,6 @@
>   * Denis Ciocca <denis.ciocca@st.com>
>   */
>  #include <linux/module.h>
> -#include <linux/interrupt.h>
> -#include <linux/irq.h>
>  #include <linux/iio/kfifo_buf.h>
>  #include <linux/iio/iio.h>
>  #include <linux/iio/buffer.h>
> @@ -42,10 +40,6 @@
>  
>  #include "st_lsm6dsx.h"
>  
> -#define ST_LSM6DSX_REG_HLACTIVE_ADDR		0x12
> -#define ST_LSM6DSX_REG_HLACTIVE_MASK		BIT(5)
> -#define ST_LSM6DSX_REG_PP_OD_ADDR		0x12
> -#define ST_LSM6DSX_REG_PP_OD_MASK		BIT(4)
>  #define ST_LSM6DSX_REG_FIFO_MODE_ADDR		0x0a
>  #define ST_LSM6DSX_FIFO_MODE_MASK		GENMASK(2, 0)
>  #define ST_LSM6DSX_FIFO_ODR_MASK		GENMASK(6, 3)
> @@ -654,25 +648,6 @@ int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
>  	return err;
>  }
>  
> -static irqreturn_t st_lsm6dsx_handler_irq(int irq, void *private)
> -{
> -	struct st_lsm6dsx_hw *hw = private;
> -
> -	return hw->sip > 0 ? IRQ_WAKE_THREAD : IRQ_NONE;
> -}
> -
> -static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
> -{
> -	struct st_lsm6dsx_hw *hw = private;
> -	int count;
> -
> -	mutex_lock(&hw->fifo_lock);
> -	count = hw->settings->fifo_ops.read_fifo(hw);
> -	mutex_unlock(&hw->fifo_lock);
> -
> -	return count ? IRQ_HANDLED : IRQ_NONE;
> -}
> -
>  static int st_lsm6dsx_buffer_preenable(struct iio_dev *iio_dev)
>  {
>  	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
> @@ -702,59 +677,8 @@ static const struct iio_buffer_setup_ops st_lsm6dsx_buffer_ops = {
>  
>  int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw)
>  {
> -	struct device_node *np = hw->dev->of_node;
> -	struct st_sensors_platform_data *pdata;
>  	struct iio_buffer *buffer;
> -	unsigned long irq_type;
> -	bool irq_active_low;
> -	int i, err;
> -
> -	irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq));
> -
> -	switch (irq_type) {
> -	case IRQF_TRIGGER_HIGH:
> -	case IRQF_TRIGGER_RISING:
> -		irq_active_low = false;
> -		break;
> -	case IRQF_TRIGGER_LOW:
> -	case IRQF_TRIGGER_FALLING:
> -		irq_active_low = true;
> -		break;
> -	default:
> -		dev_info(hw->dev, "mode %lx unsupported\n", irq_type);
> -		return -EINVAL;
> -	}
> -
> -	err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_HLACTIVE_ADDR,
> -				 ST_LSM6DSX_REG_HLACTIVE_MASK,
> -				 FIELD_PREP(ST_LSM6DSX_REG_HLACTIVE_MASK,
> -					    irq_active_low));
> -	if (err < 0)
> -		return err;
> -
> -	pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
> -	if ((np && of_property_read_bool(np, "drive-open-drain")) ||
> -	    (pdata && pdata->open_drain)) {
> -		err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_PP_OD_ADDR,
> -					 ST_LSM6DSX_REG_PP_OD_MASK,
> -					 FIELD_PREP(ST_LSM6DSX_REG_PP_OD_MASK,
> -						    1));
> -		if (err < 0)
> -			return err;
> -
> -		irq_type |= IRQF_SHARED;
> -	}
> -
> -	err = devm_request_threaded_irq(hw->dev, hw->irq,
> -					st_lsm6dsx_handler_irq,
> -					st_lsm6dsx_handler_thread,
> -					irq_type | IRQF_ONESHOT,
> -					"lsm6dsx", hw);
> -	if (err) {
> -		dev_err(hw->dev, "failed to request trigger irq %d\n",
> -			hw->irq);
> -		return err;
> -	}
> +	int i;
>  
>  	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
>  		if (!hw->iio_devs[i])
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index b65a6ca775e0..ef838206b30f 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -50,6 +50,8 @@
>  #include <linux/delay.h>
>  #include <linux/iio/iio.h>
>  #include <linux/iio/sysfs.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
>  #include <linux/pm.h>
>  #include <linux/regmap.h>
>  #include <linux/bitfield.h>
> @@ -65,6 +67,11 @@
>  #define ST_LSM6DSX_REG_BDU_ADDR			0x12
>  #define ST_LSM6DSX_REG_BDU_MASK			BIT(6)
>  
> +#define ST_LSM6DSX_REG_HLACTIVE_ADDR		0x12
> +#define ST_LSM6DSX_REG_HLACTIVE_MASK		BIT(5)
> +#define ST_LSM6DSX_REG_PP_OD_ADDR		0x12
> +#define ST_LSM6DSX_REG_PP_OD_MASK		BIT(4)
> +
>  static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
>  	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
>  	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2a, IIO_MOD_Y, 1),
> @@ -1525,6 +1532,83 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
>  	return iio_dev;
>  }
>  
> +static irqreturn_t st_lsm6dsx_handler_irq(int irq, void *private)
> +{
> +	struct st_lsm6dsx_hw *hw = private;
> +
> +	return hw->sip > 0 ? IRQ_WAKE_THREAD : IRQ_NONE;
> +}
> +
> +static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
> +{
> +	struct st_lsm6dsx_hw *hw = private;
> +	int count;
> +
> +	mutex_lock(&hw->fifo_lock);
> +	count = hw->settings->fifo_ops.read_fifo(hw);
> +	mutex_unlock(&hw->fifo_lock);
> +
> +	return count ? IRQ_HANDLED : IRQ_NONE;
> +}
> +
> +static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
> +{
> +	struct st_sensors_platform_data *pdata;
> +	struct device_node *np = hw->dev->of_node;
> +	unsigned long irq_type;
> +	bool irq_active_low;
> +	int err;
> +
> +	irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq));
> +
> +	switch (irq_type) {
> +	case IRQF_TRIGGER_HIGH:
> +	case IRQF_TRIGGER_RISING:
> +		irq_active_low = false;
> +		break;
> +	case IRQF_TRIGGER_LOW:
> +	case IRQF_TRIGGER_FALLING:
> +		irq_active_low = true;
> +		break;
> +	default:
> +		dev_info(hw->dev, "mode %lx unsupported\n", irq_type);
> +		return -EINVAL;
> +	}
> +
> +	err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_HLACTIVE_ADDR,
> +				 ST_LSM6DSX_REG_HLACTIVE_MASK,
> +				 FIELD_PREP(ST_LSM6DSX_REG_HLACTIVE_MASK,
> +					    irq_active_low));
> +	if (err < 0)
> +		return err;
> +
> +	pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
> +	if ((np && of_property_read_bool(np, "drive-open-drain")) ||
> +	    (pdata && pdata->open_drain)) {
> +		err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_PP_OD_ADDR,
> +					 ST_LSM6DSX_REG_PP_OD_MASK,
> +					 FIELD_PREP(ST_LSM6DSX_REG_PP_OD_MASK,
> +						    1));
> +		if (err < 0)
> +			return err;
> +
> +		irq_type |= IRQF_SHARED;
> +	}
> +
> +	err = devm_request_threaded_irq(hw->dev, hw->irq,
> +					st_lsm6dsx_handler_irq,
> +					st_lsm6dsx_handler_thread,
> +					irq_type | IRQF_ONESHOT,
> +					"lsm6dsx", hw);
> +	if (err) {
> +		dev_err(hw->dev, "failed to request trigger irq %d\n",
> +			hw->irq);
> +		return err;
> +	}
> +
> +	return 0;
> +}
> +
>  int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
>  		     struct regmap *regmap)
>  {
> @@ -1573,6 +1657,10 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
>  	}
>  
>  	if (hw->irq > 0) {
> +		err = st_lsm6dsx_irq_setup(hw);
> +		if (err < 0)
> +			return err;
> +
>  		err = st_lsm6dsx_fifo_setup(hw);
>  		if (err < 0)
>  			return err;

Re: [PATCH v10 2/5] iio: imu: st_lsm6dsx: add motion events

[Jonathan Cameron]

On Mon, 16 Sep 2019 15:56:27 +0200
Sean Nyekjaer <sean@geanix.com> wrote:

> Add event channels that controls the creation of motion events.
> Tested on ISM330DLC
> 
> Signed-off-by: Sean Nyekjaer <sean@geanix.com>

st_lsm6dsx_event_setup not declared.. Fixed up by adding static marking.

Applied

Thanks,

Jonathan


> ---
> Changes since v4:
>  * Added check for event support
>  * Added registers for more devices that support this event
> 
> Changes since v5:
>  * Moved wakeup_src masks to PATCH 5/6
> 
> Changes since v6:
>  * None
> 
> Changes since v7:
>  * None
> 
> Changes since v8:
>  * None
> 
> Changes since v10:
>  * enable_event changed to a u8
> 
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h      |  41 ++++
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 191 ++++++++++++++++++-
>  2 files changed, 228 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> index 21d14072d1c6..6b0ba48394eb 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> @@ -12,6 +12,7 @@
>  #define ST_LSM6DSX_H
>  
>  #include <linux/device.h>
> +#include <linux/iio/iio.h>
>  
>  #define ST_LSM6DS3_DEV_NAME	"lsm6ds3"
>  #define ST_LSM6DS3H_DEV_NAME	"lsm6ds3h"
> @@ -54,6 +55,26 @@ enum st_lsm6dsx_hw_id {
>  					 * ST_LSM6DSX_TAGGED_SAMPLE_SIZE)
>  #define ST_LSM6DSX_SHIFT_VAL(val, mask)	(((val) << __ffs(mask)) & (mask))
>  
> +#define ST_LSM6DSX_CHANNEL_ACC(chan_type, addr, mod, scan_idx)		\
> +{									\
> +	.type = chan_type,						\
> +	.address = addr,						\
> +	.modified = 1,							\
> +	.channel2 = mod,						\
> +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),			\
> +	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),		\
> +	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
> +	.scan_index = scan_idx,						\
> +	.scan_type = {							\
> +		.sign = 's',						\
> +		.realbits = 16,						\
> +		.storagebits = 16,					\
> +		.endianness = IIO_LE,					\
> +	},								\
> +	.event_spec = &st_lsm6dsx_event,				\
> +	.num_event_specs = 1,						\
> +}
> +
>  #define ST_LSM6DSX_CHANNEL(chan_type, addr, mod, scan_idx)		\
>  {									\
>  	.type = chan_type,						\
> @@ -162,6 +183,11 @@ struct st_lsm6dsx_shub_settings {
>  	u8 batch_en;
>  };
>  
> +struct st_lsm6dsx_event_settings {
> +	struct st_lsm6dsx_reg enable_reg;
> +	struct st_lsm6dsx_reg wakeup_reg;
> +};
> +
>  enum st_lsm6dsx_ext_sensor_id {
>  	ST_LSM6DSX_ID_MAGN,
>  };
> @@ -225,6 +251,9 @@ struct st_lsm6dsx_settings {
>  	u8 wai;
>  	u8 int1_addr;
>  	u8 int2_addr;
> +	u8 int1_func_addr;
> +	u8 int2_func_addr;
> +	u8 int_func_mask;
>  	u8 reset_addr;
>  	u16 max_fifo_size;
>  	struct {
> @@ -244,6 +273,7 @@ struct st_lsm6dsx_settings {
>  	struct st_lsm6dsx_fifo_ops fifo_ops;
>  	struct st_lsm6dsx_hw_ts_settings ts_settings;
>  	struct st_lsm6dsx_shub_settings shub_settings;
> +	struct st_lsm6dsx_event_settings event_settings;
>  };
>  
>  enum st_lsm6dsx_sensor_id {
> @@ -324,6 +354,10 @@ struct st_lsm6dsx_hw {
>  	u8 ts_sip;
>  	u8 sip;
>  
> +	u8 event_threshold;
> +	u8 enable_event;
> +	struct st_lsm6dsx_reg irq_routing;
> +
>  	u8 *buff;
>  
>  	struct iio_dev *iio_devs[ST_LSM6DSX_ID_MAX];
> @@ -331,6 +365,13 @@ struct st_lsm6dsx_hw {
>  	const struct st_lsm6dsx_settings *settings;
>  };
>  
> +static const struct iio_event_spec st_lsm6dsx_event = {
> +	.type = IIO_EV_TYPE_THRESH,
> +	.dir = IIO_EV_DIR_EITHER,
> +	.mask_separate = BIT(IIO_EV_INFO_VALUE) |
> +			 BIT(IIO_EV_INFO_ENABLE)
> +};
> +
>  static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0};
>  extern const struct dev_pm_ops st_lsm6dsx_pm_ops;
>  
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index ef838206b30f..4198ba263d03 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -73,9 +73,9 @@
>  #define ST_LSM6DSX_REG_PP_OD_MASK		BIT(4)
>  
>  static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
> -	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
> -	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2a, IIO_MOD_Y, 1),
> -	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2c, IIO_MOD_Z, 2),
> +	ST_LSM6DSX_CHANNEL_ACC(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
> +	ST_LSM6DSX_CHANNEL_ACC(IIO_ACCEL, 0x2a, IIO_MOD_Y, 1),
> +	ST_LSM6DSX_CHANNEL_ACC(IIO_ACCEL, 0x2c, IIO_MOD_Z, 2),
>  	IIO_CHAN_SOFT_TIMESTAMP(3),
>  };
>  
> @@ -168,6 +168,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  		.wai = 0x69,
>  		.int1_addr = 0x0d,
>  		.int2_addr = 0x0e,
> +		.int1_func_addr = 0x5e,
> +		.int2_func_addr = 0x5f,
> +		.int_func_mask = BIT(5),
>  		.reset_addr = 0x12,
>  		.max_fifo_size = 1365,
>  		.id = {
> @@ -279,11 +282,20 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  				.mask = GENMASK(5, 3),
>  			},
>  		},
> +		.event_settings = {
> +			.wakeup_reg = {
> +				.addr = 0x5B,
> +				.mask = GENMASK(5, 0),
> +			},
> +		},
>  	},
>  	{
>  		.wai = 0x69,
>  		.int1_addr = 0x0d,
>  		.int2_addr = 0x0e,
> +		.int1_func_addr = 0x5e,
> +		.int2_func_addr = 0x5f,
> +		.int_func_mask = BIT(5),
>  		.reset_addr = 0x12,
>  		.max_fifo_size = 682,
>  		.id = {
> @@ -395,11 +407,20 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  				.mask = GENMASK(5, 3),
>  			},
>  		},
> +		.event_settings = {
> +			.wakeup_reg = {
> +				.addr = 0x5B,
> +				.mask = GENMASK(5, 0),
> +			},
> +		},
>  	},
>  	{
>  		.wai = 0x6a,
>  		.int1_addr = 0x0d,
>  		.int2_addr = 0x0e,
> +		.int1_func_addr = 0x5e,
> +		.int2_func_addr = 0x5f,
> +		.int_func_mask = BIT(5),
>  		.reset_addr = 0x12,
>  		.max_fifo_size = 682,
>  		.id = {
> @@ -520,6 +541,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  				.mask = GENMASK(5, 3),
>  			},
>  		},
> +		.event_settings = {
> +			.enable_reg = {
> +				.addr = 0x58,
> +				.mask = BIT(7),
> +			},
> +			.wakeup_reg = {
> +				.addr = 0x5B,
> +				.mask = GENMASK(5, 0),
> +			},
> +		},
>  	},
>  	{
>  		.wai = 0x6c,
> @@ -666,6 +697,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  		.wai = 0x6b,
>  		.int1_addr = 0x0d,
>  		.int2_addr = 0x0e,
> +		.int1_func_addr = 0x5e,
> +		.int2_func_addr = 0x5f,
> +		.int_func_mask = BIT(5),
>  		.reset_addr = 0x12,
>  		.max_fifo_size = 512,
>  		.id = {
> @@ -773,11 +807,24 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  				.mask = GENMASK(7, 6),
>  			},
>  		},
> +		.event_settings = {
> +			.enable_reg = {
> +				.addr = 0x58,
> +				.mask = BIT(7),
> +			},
> +			.wakeup_reg = {
> +				.addr = 0x5B,
> +				.mask = GENMASK(5, 0),
> +			},
> +		},
>  	},
>  	{
>  		.wai = 0x6b,
>  		.int1_addr = 0x0d,
>  		.int2_addr = 0x0e,
> +		.int1_func_addr = 0x5e,
> +		.int2_func_addr = 0x5f,
> +		.int_func_mask = BIT(5),
>  		.reset_addr = 0x12,
>  		.max_fifo_size = 512,
>  		.id = {
> @@ -913,6 +960,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  			.slv0_addr = 0x15,
>  			.dw_slv0_addr = 0x21,
>  			.batch_en = BIT(3),
> +		},
> +		.event_settings = {
> +			.enable_reg = {
> +				.addr = 0x58,
> +				.mask = BIT(7),
> +			},
> +			.wakeup_reg = {
> +				.addr = 0x5B,
> +				.mask = GENMASK(5, 0),
> +			},
>  		}
>  	},
>  };
> @@ -1119,7 +1176,8 @@ static int st_lsm6dsx_read_oneshot(struct st_lsm6dsx_sensor *sensor,
>  	if (err < 0)
>  		return err;
>  
> -	st_lsm6dsx_sensor_set_enable(sensor, false);
> +	if (!hw->enable_event)
> +		st_lsm6dsx_sensor_set_enable(sensor, false);
>  
>  	*val = (s16)le16_to_cpu(data);
>  
> @@ -1192,6 +1250,123 @@ static int st_lsm6dsx_write_raw(struct iio_dev *iio_dev,
>  	return err;
>  }
>  
> +int st_lsm6dsx_event_setup(struct st_lsm6dsx_hw *hw, int state)
> +{
> +	int err;
> +	u8 enable = 0;
> +
> +	if (!hw->settings->int1_func_addr)
> +		return -ENOTSUPP;
> +
> +	enable = state ? hw->settings->event_settings.enable_reg.mask : 0;
> +
> +	err = regmap_update_bits(hw->regmap,
> +				 hw->settings->event_settings.enable_reg.addr,
> +				 hw->settings->event_settings.enable_reg.mask,
> +				 enable);
> +	if (err < 0)
> +		return err;
> +
> +	enable = state ? hw->irq_routing.mask : 0;
> +
> +	/* Enable wakeup interrupt */
> +	return regmap_update_bits(hw->regmap, hw->irq_routing.addr,
> +				  hw->irq_routing.mask,
> +				  enable);
> +}
> +
> +static int st_lsm6dsx_read_event(struct iio_dev *iio_dev,
> +				   const struct iio_chan_spec *chan,
> +				   enum iio_event_type type,
> +				   enum iio_event_direction dir,
> +				   enum iio_event_info info,
> +				   int *val, int *val2)
> +{
> +	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
> +	struct st_lsm6dsx_hw *hw = sensor->hw;
> +
> +	if (type != IIO_EV_TYPE_THRESH)
> +		return -EINVAL;
> +
> +	*val2 = 0;
> +	*val = hw->event_threshold;
> +
> +	return IIO_VAL_INT;
> +}
> +
> +static int st_lsm6dsx_write_event(struct iio_dev *iio_dev,
> +				    const struct iio_chan_spec *chan,
> +				    enum iio_event_type type,
> +				    enum iio_event_direction dir,
> +				    enum iio_event_info info,
> +				    int val, int val2)
> +{
> +	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
> +	struct st_lsm6dsx_hw *hw = sensor->hw;
> +	int err;
> +
> +	if (type != IIO_EV_TYPE_THRESH)
> +		return -EINVAL;
> +
> +	if (val < 0 || val > 31)
> +		return -EINVAL;
> +
> +	err = regmap_update_bits(hw->regmap,
> +				 hw->settings->event_settings.wakeup_reg.addr,
> +				 hw->settings->event_settings.wakeup_reg.mask,
> +				 val);
> +	if (err)
> +		return -EINVAL;
> +
> +	hw->event_threshold = val;
> +
> +	return 0;
> +}
> +
> +static int st_lsm6dsx_read_event_config(struct iio_dev *iio_dev,
> +					  const struct iio_chan_spec *chan,
> +					  enum iio_event_type type,
> +					  enum iio_event_direction dir)
> +{
> +	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
> +	struct st_lsm6dsx_hw *hw = sensor->hw;
> +
> +	if (type != IIO_EV_TYPE_THRESH)
> +		return -EINVAL;
> +
> +	return hw->enable_event;
> +}
> +
> +static int st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
> +					   const struct iio_chan_spec *chan,
> +					   enum iio_event_type type,
> +					   enum iio_event_direction dir,
> +					   int state)
> +{
> +	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
> +	struct st_lsm6dsx_hw *hw = sensor->hw;
> +	int err = 0;
> +
> +	if (type != IIO_EV_TYPE_THRESH)
> +		return -EINVAL;
> +
> +	/* do not enable events if they are already enabled */
> +	if (state && hw->enable_event)
> +		return 0;
> +
> +	err = st_lsm6dsx_event_setup(hw, state);
> +	if (err < 0)
> +		return err;
> +
> +	err = st_lsm6dsx_sensor_set_enable(sensor, state);
> +	if (err < 0)
> +		return err;
> +
> +	hw->enable_event = state;
> +
> +	return 0;
> +}
> +
>  int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val)
>  {
>  	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
> @@ -1276,6 +1451,10 @@ static const struct iio_info st_lsm6dsx_acc_info = {
>  	.attrs = &st_lsm6dsx_acc_attribute_group,
>  	.read_raw = st_lsm6dsx_read_raw,
>  	.write_raw = st_lsm6dsx_write_raw,
> +	.read_event_value = st_lsm6dsx_read_event,
> +	.write_event_value = st_lsm6dsx_write_event,
> +	.read_event_config = st_lsm6dsx_read_event_config,
> +	.write_event_config = st_lsm6dsx_write_event_config,
>  	.hwfifo_set_watermark = st_lsm6dsx_set_watermark,
>  };
>  
> @@ -1321,9 +1500,13 @@ static int st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw, u8 *drdy_reg)
>  	switch (drdy_pin) {
>  	case 1:
>  		*drdy_reg = hw->settings->int1_addr;
> +		hw->irq_routing.addr = hw->settings->int1_func_addr;
> +		hw->irq_routing.mask = hw->settings->int_func_mask;
>  		break;
>  	case 2:
>  		*drdy_reg = hw->settings->int2_addr;
> +		hw->irq_routing.addr = hw->settings->int2_func_addr;
> +		hw->irq_routing.mask = hw->settings->int_func_mask;
>  		break;
>  	default:
>  		dev_err(hw->dev, "unsupported data ready pin\n");

Re: [PATCH v10 3/5] iio: imu: st_lsm6dsx: add wakeup-source option

[Jonathan Cameron]

On Mon, 16 Sep 2019 15:56:28 +0200
Sean Nyekjaer <sean@geanix.com> wrote:

> This add ways for the SoC to wake from accelerometer wake events.
> 
> In the suspend function we skip disabling the sensor if wakeup-source
> and events are activated.
> 
> Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to poke it.

Thanks,

Jonathan

> ---
> Changes since v4:
>  * More devices supports wakeup
> 
> Changes since v5:
>  * None
> 
> Changes since v6:
>  * None
> 
> Changes since v7:
>  * Add check for hw->enable_event
>  * Moved disable_irq_wake section so it's called
>  * Removed not neeeded continue from disable_irq_wake section
> 
> Changes since v8:
>  * Using sensor->id instead of i in suspend/resume loops
> 
> Changes since v9:
>  * None
> 
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index 4198ba263d03..a7f12cf57f11 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -1858,6 +1858,9 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
>  			return err;
>  	}
>  
> +	if (dev->of_node && of_property_read_bool(dev->of_node, "wakeup-source"))
> +		device_init_wakeup(dev, true);
> +
>  	return 0;
>  }
>  EXPORT_SYMBOL(st_lsm6dsx_probe);
> @@ -1876,6 +1879,13 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev)
>  		if (!(hw->enable_mask & BIT(sensor->id)))
>  			continue;
>  
> +		if (device_may_wakeup(dev) &&
> +		    sensor->id == ST_LSM6DSX_ID_ACC && hw->enable_event) {
> +			/* Enable wake from IRQ */
> +			enable_irq_wake(hw->irq);
> +			continue;
> +		}
> +
>  		if (sensor->id == ST_LSM6DSX_ID_EXT0 ||
>  		    sensor->id == ST_LSM6DSX_ID_EXT1 ||
>  		    sensor->id == ST_LSM6DSX_ID_EXT2)
> @@ -1905,6 +1915,10 @@ static int __maybe_unused st_lsm6dsx_resume(struct device *dev)
>  			continue;
>  
>  		sensor = iio_priv(hw->iio_devs[i]);
> +		if (device_may_wakeup(dev) &&
> +		    sensor->id == ST_LSM6DSX_ID_ACC && hw->enable_event)
> +			disable_irq_wake(hw->irq);
> +
>  		if (!(hw->suspend_mask & BIT(sensor->id)))
>  			continue;
>  

Re: [PATCH v10 4/5] iio: imu: st_lsm6dsx: always enter interrupt thread

[Jonathan Cameron]

On Mon, 16 Sep 2019 15:56:29 +0200
Sean Nyekjaer <sean@geanix.com> wrote:

> The interrupt source can come from multiple sources,
> fifo and wake interrupts.
> Enter interrupt thread to check which interrupt that has fired.
> 
> Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.

thanks,

Jonathan

> ---
> Changes since v8:
>  * Remove st_lsm6dsx_handler_irq function to enter interrupt thread
>    at every interrupt
> 
> Changes since v9:
>  * None
> 
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 9 +--------
>  1 file changed, 1 insertion(+), 8 deletions(-)
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index a7f12cf57f11..6b03c50f4732 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -1715,13 +1715,6 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
>  	return iio_dev;
>  }
>  
> -static irqreturn_t st_lsm6dsx_handler_irq(int irq, void *private)
> -{
> -	struct st_lsm6dsx_hw *hw = private;
> -
> -	return hw->sip > 0 ? IRQ_WAKE_THREAD : IRQ_NONE;
> -}
> -
>  static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
>  {
>  	struct st_lsm6dsx_hw *hw = private;
> @@ -1779,7 +1772,7 @@ static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
>  	}
>  
>  	err = devm_request_threaded_irq(hw->dev, hw->irq,
> -					st_lsm6dsx_handler_irq,
> +					NULL,
>  					st_lsm6dsx_handler_thread,
>  					irq_type | IRQF_ONESHOT,
>  					"lsm6dsx", hw);

Re: [PATCH v10 5/5] iio: imu: st_lsm6dsx: add motion report function and call from interrupt

[Jonathan Cameron]

On Mon, 16 Sep 2019 15:56:30 +0200
Sean Nyekjaer <sean@geanix.com> wrote:

> Report iio motion events to iio subsystem and filter motion events.
> Wakeup will still be on all channels as it's not possible to do the filtering
> in hw.
> 
> Signed-off-by: Sean Nyekjaer <sean@geanix.com>
*report_motion_event not declared.  I've added the missing static.

Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.

Thanks,

Jonathan

> ---
> Changes since v4:
>  * Updated bitmask as pr Jonathans comments
> 
> Changes since v5:
>  * None
> 
> Changes since v6:
>  * None
> 
> Changes since v7:
>  * None
> 
> Changes since v8:
>  * None
> 
> Changes since v9:
>  * Merged with "iio: imu: st_lsm6dsx: filter motion events in driver"
> 
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h      |  5 +
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 97 +++++++++++++++++++-
>  2 files changed, 98 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> index 6b0ba48394eb..fd02d0e184f3 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> @@ -186,6 +186,11 @@ struct st_lsm6dsx_shub_settings {
>  struct st_lsm6dsx_event_settings {
>  	struct st_lsm6dsx_reg enable_reg;
>  	struct st_lsm6dsx_reg wakeup_reg;
> +	u8 wakeup_src_reg;
> +	u8 wakeup_src_status_mask;
> +	u8 wakeup_src_z_mask;
> +	u8 wakeup_src_y_mask;
> +	u8 wakeup_src_x_mask;
>  };
>  
>  enum st_lsm6dsx_ext_sensor_id {
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index 6b03c50f4732..f4f71cf4187a 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -48,6 +48,7 @@
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/delay.h>
> +#include <linux/iio/events.h>
>  #include <linux/iio/iio.h>
>  #include <linux/iio/sysfs.h>
>  #include <linux/interrupt.h>
> @@ -287,6 +288,11 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  				.addr = 0x5B,
>  				.mask = GENMASK(5, 0),
>  			},
> +			.wakeup_src_reg = 0x1b,
> +			.wakeup_src_status_mask = BIT(3),
> +			.wakeup_src_z_mask = BIT(0),
> +			.wakeup_src_y_mask = BIT(1),
> +			.wakeup_src_x_mask = BIT(2),
>  		},
>  	},
>  	{
> @@ -412,6 +418,11 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  				.addr = 0x5B,
>  				.mask = GENMASK(5, 0),
>  			},
> +			.wakeup_src_reg = 0x1b,
> +			.wakeup_src_status_mask = BIT(3),
> +			.wakeup_src_z_mask = BIT(0),
> +			.wakeup_src_y_mask = BIT(1),
> +			.wakeup_src_x_mask = BIT(2),
>  		},
>  	},
>  	{
> @@ -550,6 +561,11 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  				.addr = 0x5B,
>  				.mask = GENMASK(5, 0),
>  			},
> +			.wakeup_src_reg = 0x1b,
> +			.wakeup_src_status_mask = BIT(3),
> +			.wakeup_src_z_mask = BIT(0),
> +			.wakeup_src_y_mask = BIT(1),
> +			.wakeup_src_x_mask = BIT(2),
>  		},
>  	},
>  	{
> @@ -816,6 +832,11 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  				.addr = 0x5B,
>  				.mask = GENMASK(5, 0),
>  			},
> +			.wakeup_src_reg = 0x1b,
> +			.wakeup_src_status_mask = BIT(3),
> +			.wakeup_src_z_mask = BIT(0),
> +			.wakeup_src_y_mask = BIT(1),
> +			.wakeup_src_x_mask = BIT(2),
>  		},
>  	},
>  	{
> @@ -970,6 +991,11 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  				.addr = 0x5B,
>  				.mask = GENMASK(5, 0),
>  			},
> +			.wakeup_src_reg = 0x1b,
> +			.wakeup_src_status_mask = BIT(3),
> +			.wakeup_src_z_mask = BIT(0),
> +			.wakeup_src_y_mask = BIT(1),
> +			.wakeup_src_x_mask = BIT(2),
>  		}
>  	},
>  };
> @@ -1334,7 +1360,7 @@ static int st_lsm6dsx_read_event_config(struct iio_dev *iio_dev,
>  	if (type != IIO_EV_TYPE_THRESH)
>  		return -EINVAL;
>  
> -	return hw->enable_event;
> +	return !!(hw->enable_event & BIT(chan->channel2));
>  }
>  
>  static int st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
> @@ -1345,13 +1371,28 @@ static int st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
>  {
>  	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
>  	struct st_lsm6dsx_hw *hw = sensor->hw;
> +	u8 enable_event;
>  	int err = 0;
>  
>  	if (type != IIO_EV_TYPE_THRESH)
>  		return -EINVAL;
>  
> -	/* do not enable events if they are already enabled */
> -	if (state && hw->enable_event)
> +	if (state) {
> +		enable_event = hw->enable_event | BIT(chan->channel2);
> +
> +		/* do not enable events if they are already enabled */
> +		if (hw->enable_event)
> +			goto out;
> +	} else {
> +		enable_event = hw->enable_event & ~BIT(chan->channel2);
> +
> +		/* only turn off sensor if no events is enabled */
> +		if (enable_event)
> +			goto out;
> +	}
> +
> +	/* stop here if no changes have been made */
> +	if (hw->enable_event == enable_event)
>  		return 0;
>  
>  	err = st_lsm6dsx_event_setup(hw, state);
> @@ -1362,7 +1403,8 @@ static int st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
>  	if (err < 0)
>  		return err;
>  
> -	hw->enable_event = state;
> +out:
> +	hw->enable_event = enable_event;
>  
>  	return 0;
>  }
> @@ -1715,10 +1757,57 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
>  	return iio_dev;
>  }
>  
> +void st_lsm6dsx_report_motion_event(struct st_lsm6dsx_hw *hw, int data)
> +{
> +	s64 timestamp = iio_get_time_ns(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
> +
> +	if ((data & hw->settings->event_settings.wakeup_src_z_mask) &&
> +	    (hw->enable_event & BIT(IIO_MOD_Z)))
> +		iio_push_event(hw->iio_devs[ST_LSM6DSX_ID_ACC],
> +			       IIO_MOD_EVENT_CODE(IIO_ACCEL,
> +						  0,
> +						  IIO_MOD_Z,
> +						  IIO_EV_TYPE_THRESH,
> +						  IIO_EV_DIR_EITHER),
> +						  timestamp);
> +
> +	if ((data & hw->settings->event_settings.wakeup_src_y_mask) &&
> +	    (hw->enable_event & BIT(IIO_MOD_Y)))
> +		iio_push_event(hw->iio_devs[ST_LSM6DSX_ID_ACC],
> +			       IIO_MOD_EVENT_CODE(IIO_ACCEL,
> +						  0,
> +						  IIO_MOD_Y,
> +						  IIO_EV_TYPE_THRESH,
> +						  IIO_EV_DIR_EITHER),
> +						  timestamp);
> +
> +	if ((data & hw->settings->event_settings.wakeup_src_x_mask) &&
> +	    (hw->enable_event & BIT(IIO_MOD_X)))
> +		iio_push_event(hw->iio_devs[ST_LSM6DSX_ID_ACC],
> +			       IIO_MOD_EVENT_CODE(IIO_ACCEL,
> +						  0,
> +						  IIO_MOD_X,
> +						  IIO_EV_TYPE_THRESH,
> +						  IIO_EV_DIR_EITHER),
> +						  timestamp);
> +}
> +
>  static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
>  {
>  	struct st_lsm6dsx_hw *hw = private;
>  	int count;
> +	int data, err;
> +
> +	if (hw->enable_event) {
> +		err = regmap_read(hw->regmap,
> +				  hw->settings->event_settings.wakeup_src_reg,
> +				  &data);
> +		if (err < 0)
> +			return IRQ_NONE;
> +
> +		if (data & hw->settings->event_settings.wakeup_src_status_mask)
> +			st_lsm6dsx_report_motion_event(hw, data);
> +	}
>  
>  	mutex_lock(&hw->fifo_lock);
>  	count = hw->settings->fifo_ops.read_fifo(hw);